IEC 61000-4-7 : 2.1

Current

Current The latest, up-to-date edition.

ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-7: TESTING AND MEASUREMENT TECHNIQUES - GENERAL GUIDE ON HARMONICS AND INTERHARMONICS MEASUREMENTS AND INSTRUMENTATION, FOR POWER SUPPLY SYSTEMS AND EQUIPMENT CONNECTED THERETO

Publisher: International Electrotechnical Committee

Published: 10-28-2009

Available Formats: PDF - English - French, Hardcopy - English - French
More Info on product formats

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions, symbols and indices
  3.1 Definitions related to frequency analysis
  3.2 Definitions related to harmonics
  3.3 Definitions related to distortion factors
  3.4 Definitions related to interharmonics
  3.5 Notations
      3.5.1 Symbols
      3.5.2 Subscripts
4 General concepts and common requirements for
  all types of instrumentation
  4.1 Characteristics of the signal to be measured
  4.2 Accuracy classes of instrumentation
  4.3 Types of measurement
  4.4 General structure of the instrument
      4.4.1 Main instrument
      4.4.2 Post-processing parts
5 Harmonic measurements
  5.1 Current input circuit
  5.2 Voltage input circuit
  5.3 Accuracy requirements
  5.4 Measurement set-up and supply voltage
      5.4.1 Measurement set-up for emission assessment
      5.4.2 Supply voltage for emission assessment
      5.4.3 Equipment power
  5.5 Assessment of harmonic emissions
      5.5.1 Grouping and smoothing
      5.5.2 Compliance with emission limits
  5.6 Assessment of voltage harmonic subgroups
6 Other analysis principles
7 Transitional period
8 General
Annex A (informative) - Measurement of interharmonics
Annex B (informative) - Measurements above the harmonic
        frequency range up to 9 kHz
Annex C (informative) - Technical considerations for
        grouping method
Bibliography

Abstract - (Show below) - (Hide below)

Applies to instrumentation intended for measuring spectral components in the frequency range up to 9 kHz which are superimposed on the fundamental of the power supply systems at 50 Hz and 60 Hz.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Electrotechnical Committee
Pages
ISBN
Committee	TC 77

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN 61000-4-7 : 2002 AMD 1 2009	Identical
NEN EN IEC 61000-4-7 : 2002 AMD 1 2009	Identical
I.S. EN 61000-4-7:2002	Identical
PN EN 61000-4-7 : 2007 AMD 1 2011	Identical
SANS 61000-4-7 : 2.01ED 2009(R2015)	Identical
SAC GB/T 17626.7 : 1998	Identical
SN EN 61000-4-7 : 2002	Identical
DIN EN 61000-4-7 : 2009	Identical
VDE 0847-4-7 : 2009	Identical
AS/NZS 61000.4.7:2012	Identical
UNE-EN 61000-4-7:2004	Identical
BS EN 61000-4-7 : 2002	Identical
NF EN 61000-4-7 : 2003 AMD 1 2009	Identical
EN 61000-4-7 : 2002 AMD 1 2009	Identical
CSA CEI/IEC 61000.4.7 : 2003(R2007)	Identical
OVE/ONORM EN 61000-4-7 : 2010	Identical
BS EN 61000-4-7 : 2002	Identical
SAC GB/T 17626.7 : 1998	Identical
PN EN 61000-4-7 : 2007 AMD 1 2011	Identical
NF EN 61000-4-7 : 2003 AMD 1 2009	Identical
AS/NZS 61000.4.7:2012	Identical
DS EN 61000-4-7 : 2002 AMD 1 2009	Identical
VDE 0847-4-7 : 2009	Identical
SANS 61000-4-7 : 2.01ED 2009(R2015)	Identical
DIN EN 61000-4-7 : 2009	Identical
NEN EN IEC 61000-4-7 : 2002 AMD 1 2009	Identical
OVE/ONORM EN 61000-4-7 : 2010	Identical
CSA CEI/IEC 61000.4.7 : 2003(R2007)	Identical
SN EN 61000-4-7 : 2002	Identical
NEN 11000-4-7 : 93 C1 95	Identical
UNE-EN 61000-4-7:2004	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

CEI EN 62586-2 : 2015	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
NF EN 61000-2-2 : 2002 AMD 1 2017	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-2: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS
BS EN 61400-21 : 2008	WIND TURBINES - PART 21: MEASUREMENT AND ASSESSMENT OF POWER QUALITY CHARACTERISTICS OF GRID CONNECTED WIND TURBINES
97/260469 DC : DRAFT AUG 1997	IEC 61000-3-9 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-9: LIMITS FOR INTERHARMONIC CURRENT EMISSIONS (EQUIPMENT WITH INPUT POWER <= 16 A PER PHASE AND PRONE TO PRODUCE INTERHARMONICS BY DESIGN)
12/30255394 DC : DRAFT APR 2012	BS EN 62586-1 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - POWER QUALITY INSTRUMENTS (PQI)
BS EN 61869-6 : 2016	INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
14/30279327 DC : 0	BS EN 61800-3 AMD2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
15/30328086 DC : DRAFT JULY 2015	BS EN 61557-12 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: POWER METERING AND MONITORING DEVICES (PMD)
BS EN 61850-7-4 : 2010	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 7-4: BASIC COMMUNICATION STRUCTURE - COMPATIBLE LOGICAL NODE CLASSES AND DATA OBJECT CLASSES
IEC 62920 : 1ED 2017	PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT
UNE EN 50533 : 2012	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
CEI EN 61000-2-4 : 2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
CEI EN 60044-8 : 2004	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS
NF EN 61000-4-1 : 2007
NF EN 61000-4-13 : 2002 AMD 2 2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS
NBR IEC 61851-21 : 2013	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21: ELETRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C/D.C SUPPLY
BIS IS/IEC 61400-21 : 2008	WIND TURBINES - PART 21: MEASUREMENT AND ASSESSMENT OF POWER QUALITY CHARACTERISTICS OF GRID CONNECTED WIND TURBINES
IEC 61000-2-2 : 2.1	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-2: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS
CLC/TS 50217 : 2005	GUIDE FOR IN SITU MEASUREMENTS - IN SITU MEASUREMENT OF DISTURBANCE EMISSION
CEI 301-3 : 2005	GUIDE FOR THE CHARACTERISATION AND IDENTIFICATION OF VARIABLE SPEED ELECTRICAL DRIVES BY MEANS OF A PLATE
03/111744 DC : DRAFT JULY 2003
I.S. EN 62282-3-200:2016	FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
CSA C61000-3-14 : 2015 : R 2019	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-14: ASSESSMENT OF EMISSION LIMITS FOR HARMONICS, INTERHARMONICS, VOLTAGE FLUCTUATIONS AND UNBALANCE FOR THE CONNECTION OF DISTURBING INSTALLATIONS TO LV POWER SYSTEMS
CSA C22.3 No. 3 : 1998	ELECTRICAL COORDINATION
I.S. EN 62717:2017	LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS
08/30185866 DC : DRAFT JULY 2008	BS EN 61000-3-15 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-15: LIMITS - ASSESSMENT OF LOW FREQUENCY ELECTROMAGNETIC IMMUNITY AND EMISSION REQUIREMENTS FOR DISPERSED GENERATION SYSTEMS IN LV NETWORK
CEI EN 62586-1 : 2016	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
06/30148073 DC : DRAFT MAR 2006	IEC 61400-21 - WIND TURBINES - PART 21: MEASUREMENT AND ASSESSMENT OF POWER QUALITY CHARACTERISTICS OF GRID CONNECTED WIND TURBINES
BS EN 61000-2-4 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
10/30173701 DC : 0	BS EN 62282-3-200 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
14/30280137 DC : 0	BS EN 62282-3-200 ED 2.0 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
CEI EN 61000-3-2 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
BS PD IEC TR 62001 : 2009	HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - GUIDEBOOK TO THE SPECIFICATION AND DESIGN EVALUATION OF A.C. FILTERS
BS PD IEC TR 61000-3-6 : 2008	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-6: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF DISTORTING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
12/30263964 DC : 0	BS EN 62717 - LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS
12/30257420 DC : 0	BS EN 61851-23 ED 1.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: D.C. ELECTRIC VEHICLE CHARGING STATION
BS EN 61557-12 : 2008	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
UNE EN 62612 : 2014	SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES > 50 V - PERFORMANCE REQUIREMENTS
BS PD IEC TR 61000-3-14 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-14: ASSESSMENT OF EMISSION LIMITS FOR HARMONICS, INTERHARMONICS, VOLTAGE FLUCTUATIONS AND UNBALANCE FOR THE CONNECTION OF DISTURBING INSTALLATIONS TO LV POWER SYSTEMS
UNE EN 62586-1 : 2014	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
CEI EN 61869-6 : 1ED 2017	INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
BS EN 62282-3-200 : 2016	FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
08/30175793 DC : DRAFT JAN 2008	BS EN 61000-3-14 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-14: ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF DISTURBING INSTALLATIONS TO LV POWER SYSTEMS
09/30214359 DC : 0	BS EN 50533 - RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
BS EN 61800-4 : 2003	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A.C. POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV
IEC TR 61000-3-6 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-6: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF DISTORTING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
VDI/VDE 2185-1 : 2007	RADIO BASED COMMUNICATION IN INDUSTRIAL AUTOMATION
CSA C61000.3.6 : 2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-6: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF DISTORTING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
CSA C22.3 No. 3 : 1998 : INC : UPD 2 : 2002 : R2013	ELECTRICAL COORDINATION
96/210385 DC : 0	CLC/BTTF 68-6 (SEC)8 - MEASUREMENT GUIDE FOR VOLTAGE CHARACTERISTICS
CSA C22.3 No. 3 : 1998 : R2017	ELECTRICAL COORDINATION
ENA ER G5-4-1 : ISSUE 4 AMD 1 2005	PLANNING LEVELS FOR HARMONIC VOLTAGE DISTORTION AND THE CONNECTION OF NON-LINEAR EQUIPMENT TO TRANSMISSION SYSTEMS AND DISTRIBUTION NETWORKS IN THE UNITED KINGDOM
IEC 61800-3 REDLINE : 3ED 2017	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
BS PD IEC TS 62578 : 2015	POWER ELECTRONICS SYSTEMS AND EQUIPMENT - OPERATION CONDITIONS AND CHARACTERISTICS OF ACTIVE INFEED CONVERTER (AIC) APPLICATIONS INCLUDING DESIGN RECOMMENDATIONS FOR THEIR EMISSION VALUES BELOW 150 KHZ
BS EN 62920 : 2017	PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT (IEC 62920:2017)
16/30337838 DC : DRAFT JAN 2016	BS EN 62612 - SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES > 50 V - PERFORMANCE REQUIREMENTS
CSA C22.3 No. 3 : 1998 : INC : UPD 2 : 2002:R2013	ELECTRICAL COORDINATION
12/30256017 DC : 0	BS EN 62586-2 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
DD CLC/TS 50217 : 2005	GUIDE FOR IN SITU MEASUREMENTS - IN SITU MEASUREMENT OF DISTURBANCE EMISSION
16/30336682 DC : 0	BS EN 62717 ED1.0 - LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS
DD IEC PAS 62543 : DRAFT 2008	DC TRANSMISSION USING VOLTAGE SOURCED CONVERTERS
I.S. EN 62920:2017	PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT
BS IEC 1000-3.6 : 1996	ELECTROMAGNETIC COMPATIBILITY (EMC) - LIMITS - ASSESSMENT OF EMISSION LIMITS FOR DISTORTING LOADS IN MV AND HV POWER SYSTEMS - BASIC EMC PUBLICATION
BS PD IEC TR 62001-2 : 2016	HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - GUIDANCE TO THE SPECIFICATION AND DESIGN EVALUATION OF AC FILTERS - PERFORMANCE
UNE EN 61000-4-30 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
10/30181171 DC : 0	BS EN 62586 - POWER QUALITY MONITORING DEVICES IN POWER SUPPLY SYSTEMS
12/30262567 DC : 0	BS EN 61000-4-30 ED 3 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
BS EN 61000-2-12 : 2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-12: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
PREN 50533 : DRAFT 2009	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
06/30156472 DC : DRAFT SEP 2006	BS EN 60146-1-1 - SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
BS PD IEC TR 62001-4 : 2016	HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - GUIDANCE TO THE SPECIFICATION AND DESIGN EVALUATION OF AC FILTERS - PART 4: EQUIPMENT
BS EN 61000-4-30 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS (IEC 61000-4-30:2015)
BS PD IEC TR 61000-3-15 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-15: LIMITS - ASSESSMENT OF LOW FREQUENCY ELECTROMAGNETIC IMMUNITY AND EMISSION REQUIREMENTS FOR DISPERSED GENERATION SYSTEMS IN LV NETWORKS
TS 104 001 : 2.1.1	OPEN SMART GRID PROTOCOL (OSGP); SMART METERING/SMART GRID COMMUNICATION PROTOCOL
BS EN 61800-3 : 2004	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
BS EN 62586-1 : 2017	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
BS EN 50533 : 2011	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
07/30166755 DC : 0	BS EN 61850-7-4 - COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 7-4: BASIC COMMUNICATION STRUCTURE - COMPATIBLE LOGICAL NODE CLASSES AND DATA CLASSES
15/30327724 DC : 0	BS EN 62586-2 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
00/244985 DC : DRAFT OCT 2000	IEC 61000-3-12 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW VOLTAGE SYSTEMS WITH INPUT CURRENT LESS THAN OR EQUAL TO 75 A PER PHASE AND SUBJECT TO RESTRICTED CONNECTION
NF EN 61000-2-12 : 2004	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-12: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
ENA ER G5-4-1 : ISSUE 4 AMD 1 2005	PLANNING LEVELS FOR HARMONIC VOLTAGE DISTORTION AND THE CONNECTION OF NON-LINEAR EQUIPMENT TO TRANSMISSION SYSTEMS AND DISTRIBUTION NETWORKS IN THE UNITED KINGDOM
BS PD IEC TR 61850-90-17 : 2017	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 90-17: USING IEC 61850 TO TRANSMIT POWER QUALITY DATA
I.S. EN 61000-4-1:2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
BS PD IEC TR 61000-4-37 : 2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-37: TESTING AND MEASUREMENT TECHNIQUES - CALIBRATION AND VERIFICATION PROTOCOL FOR HARMONIC EMISSION COMPLIANCE TEST SYSTEMS
BS PD IEC TR 61000-4-38 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-38: TESTING AND MEASUREMENT TECHNIQUES - TEST, VERIFICATION AND CALIBRATION PROTOCOL FOR VOLTAGE FLUCTUATION AND FLICKER COMPLIANCE TEST SYSTEMS
16/30336107 DC : 0	BS EN 61850-7-4 AMD1 - COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 7-4: BASIC COMMUNICATION STRUCTURE - COMPATIBLE LOGICAL NODE CLASSES AND DATA OBJECT CLASSES
BS EN 61000-4-1 : 2007	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
CSA C61000-4-30 : 2010	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
DD IEC PAS 62001 : 2004	GUIDE TO THE SPECIFICATION AND DESIGN EVALUATION OF A.C. FILTERS FOR HVDC SYSTEMS
16/30332623 DC : 0	BS EN 62920 ED 1.0 - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT APPLYING TO PHOTOVOLTAIC POWER GENERATING SYSTEMS
07/30164322 DC : 0	BS EN 61000-3-6 ED.2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-6: ASSESSMENT OF HARMONIC EMISSION LIMITS FOR THE CONNECTION OF DISTORTING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
08/30183041 DC : DRAFT MAY 2008	BS EN 61000-3-12 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW VOLTAGE SYSTEMS WITH INPUT CURRENT $OG 16 A AND <= 75 A PER PHASE
03/108042 DC : DRAFT MAY 2003	IEC 61000-4-1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES
BS EN 61000-3-12 : 2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE
CSA C22.3 No. 3 : 1998:R2007	ELECTRICAL COORDINATION
BS EN 62612:2013+A2:2018	SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES > 50 V - PERFORMANCE REQUIREMENTS
IEC 61557-12 : 1.0	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
97/260470 DC : DRAFT AUG 1997	IEC 61000-4-31 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 31: MEASUREMENTS IN THE FREQUENCY RANGE 2 KHZ TO 9 KHZ - BASIC EMC STANDARD
CSA C61000.3.6 : 2009	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-6: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF DISTORTING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
CSA C22.3 No. 3 : 1998: R2017	ELECTRICAL COORDINATION
CSA C61000.3.6 : 2009 : R2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-6: LIMITS - ASSESSMENT OF EMISSION LIMITS FOR THE CONNECTION OF DISTORTING INSTALLATIONS TO MV, HV AND EHV POWER SYSTEMS
BS IEC 61000-3.4 : 1998
06/30150602 DC : DRAFT MAY 2006	BS IEC - 61000-4-30 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
03/107918 DC : DRAFT MAY 2003	IEC 61000-4-1 ED.2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
06/30159310 DC : 0	IEC 61000-4-30 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
CSA CEI/IEC 61000.2.4 : 2004	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
IEC 61800-3 : 3.0	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS
BS EN 60146-1-1 : 2010	SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
IEEE 1250 : 2011	GUIDE FOR IDENTIFYING AND IMPROVING VOLTAGE QUALITY IN POWER SYSTEMS
15/30327720 DC : 0	BS EN 62586-1 - POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
BS EN 62282-3-2 : 2006	FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
NF EN 60044-8 : 2006	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS
UNE EN 61557-12 : 2010	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
I.S. EN 61000-4-13:2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS
I.S. EN 60044-8:2002	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
IEC 61851-21 : 1.0	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21: ELECTRIC VEHICLE REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN A.C./D.C. SUPPLY
IEC TR 61000-4-37 : 1ED 2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-37: TESTING AND MEASUREMENT TECHNIQUES - CALIBRATION AND VERIFICATION PROTOCOL FOR HARMONIC EMISSION COMPLIANCE TEST SYSTEMS
I.S. EN 62586-2:2017	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
NF EN 62282 3-2 : 2006	FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER PLANTS - PERFORMANCE TEST METHODS
CSA C61000-4-30 : 2010 : R2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
IEEE DRAFT 519.1 : D9A 2004	GUIDE FOR APPLYING HARMONIC LIMITS ON POWER SYSTEMS
I.S. EN 50533:2011	RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS
IEC 61000-3-6 : 1.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - LIMITS - ASSESSMENT OF EMISSION LIMITS FOR DISTORTING LOADS IN MV AND HV POWER SYSTEMS - BASIC EMC PUBLICATION
ITU K.42 : 1998	PREPARATION OF EMISSION AND IMMUNITY REQUIREMENTS FOR TELECOMMUNICATION EQUIPMENT - GENERAL PRINCIPLES
IEC 61000-3-2 : 5.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
IEC 60969 : 2.0	SELF-BALLASTED COMPACT FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES - PERFORMANCE REQUIREMENTS
BS EN 60044-8 : 2002	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
CEI EN 61000-3-12 : 2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE
CEI EN 61000-2-2 : 2003	COMPATIBILITA ELETTROMAGNETICA (EMC) - PARTE 2-2: AMBIENTE - LIVELLI DI COMPATIBILITA PER I DISTURBI CONDOTTI IN BASSA FREQUENZA E LA TRASMISSIONE DEI SEGNALI SULLE RETI PUBBLICHE DI ALIMENTAZIONE A BASSA TENSIONE
I.S. EN 61000-3-12:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011 (EQV))
CEI EN 62717 : 2017	LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS
NF EN 61400-21 : 2009	WIND TURBINES - PART 21: MEASUREMENT AND ASSESSMENT OF POWER QUALITY CHARACTERISTICS OF GRID CONNECTED WIND TURBINES
NF EN 50240 : 2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT STANDARD FOR RESISTANCE WELDING EQUIPMENT
EN IEC 62933-2-1 : 2018	ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION (IEC 62933-2-1:2017)
UNE EN 61000-3-12 : 2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE
UNE EN 62586-2 : 2014	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
BS EN 61000-2-2 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS
SR CLC/TR 50669:2017	INVESTIGATION RESULTS ON ELECTROMAGNETIC INTERFERENCE IN THE FREQUENCY RANGE BELOW 150 KHZ
I.S. EN 61000-2-4:2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
I.S. EN 61000-2-2:2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-2: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS
IEEE C37.235 : 2007	APPLICATION OF ROGOWSKI COILS USED FOR PROTECTIVE RELAYING PURPOSES
I.S. EN 62612:2013	SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES > 50 V - PERFORMANCE REQUIREMENTS
I.S. CLC/TS 50217:2005	GUIDE FOR IN SITU MEASUREMENTS - IN SITU MEASUREMENT OF DISTURBANCE EMISSION
I.S. EN 61850-7-4:2010	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 7-4: BASIC COMMUNICATION STRUCTURE - COMPATIBLE LOGICAL NODE CLASSES AND DATA OBJECT CLASSES
I.S. EN IEC 62933-2-1:2018	ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
IEEE 1459 : 2010	DEFINITIONS FOR THE MEASUREMENT OF ELECTRIC POWER QUANTITIES UNDER SINUSOIDAL, NONSINUSOIDAL, BALANCED, OR UNBALANCED CONDITIONS
I.S. EN 50156-1:2015	ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
I.S. EN 61000-4-30:2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
I.S. EN 62282-3-2:2006	FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
I.S. EN 61869-6:2016	INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
I.S. EN 62586-1:2017	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
I.S. EN 61000-3-2:2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
CEI EN 61400-21 : 2011	WIND TURBINES - PART 21: MEASUREMENT AND ASSESSMENT OF POWER QUALITY CHARACTERISTICS OF GRID CONNECTED WIND TURBINES
BS EN 61000-4-13 : 2002	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS (IEC 61000-4-13:2002)
IEC TS 62578 : 2.0	POWER ELECTRONICS SYSTEMS AND EQUIPMENT - OPERATION CONDITIONS AND CHARACTERISTICS OF ACTIVE INFEED CONVERTER (AIC) APPLICATIONS INCLUDING DESIGN RECOMMENDATIONS FOR THEIR EMISSION VALUES BELOW 150 KHZ
EN 62717 : 2017	LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS (IEC 62717:2014, MODIFIED + A1:2015, MODIFIED)
IEC 62717 : 2015 (CON ED) 1.1	LED MODULES FOR GENERAL LIGHTING - PERFORMANCE REQUIREMENTS
IEC TR 61000-4-1 : 1ED 2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF THE IEC 61000-4 SERIES
BS EN 61000-3-2 : 2014	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
I.S. EN 61557-12:2008	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
IEC TR 61000-4-38 : 1ED 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-38: TESTING AND MEASUREMENT TECHNIQUES - TEST, VERIFICATION AND CALIBRATION PROTOCOL FOR VOLTAGE FLUCTUATION AND FLICKER COMPLIANCE TEST SYSTEMS
CSA C22.3 No. 3:1998	ELECTRICAL COORDINATION
NBR 16150 : 2013	PHOTOVOLTAIC (PV) SYSTEMS - CHARACTERISTICS OF THE UTILITY INTERFACE - CONFORMITY TEST PROCEDURE
IEC TS 61000-3-4 : 1.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - LIMITS - LIMITATION OF EMISSION OF HARMONIC CURRENTS IN LOW-VOLTAGE POWER SUPPLY SYSTEMS FOR EQUIPMENT WITH RATED CURRENT GREATER THAN 16 A
CSA C61000-3-14 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-14: ASSESSMENT OF EMISSION LIMITS FOR HARMONICS, INTERHARMONICS, VOLTAGE FLUCTUATIONS AND UNBALANCE FOR THE CONNECTION OF DISTURBING INSTALLATIONS TO LV POWER SYSTEMS
CLC/TR 50669 : 2017	INVESTIGATION RESULTS ON ELECTROMAGNETIC INTERFERENCE IN THE FREQUENCY RANGE BELOW 150 KHZ
EN 62920 : 2017	PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT (IEC 62920:2017)
IEC TR 62001-3 : 1ED 2016	HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - GUIDANCE TO THE SPECIFICATION AND DESIGN EVALUATION OF AC FILTERS - PART 3: MODELLING
CSA CEI/IEC 61000.4.30 : 2004	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
NF EN 61850-7-4 : 2003	COMMUNICATION NETWORKS AND SYSTEMS IN SUBSTATIONS - PART 7-4: BASIC COMMUNICATION STRUCTURE FOR SUBSTATION AND FEEDER EQUIPMENT - COMPATIBLE LOGICAL NODE CLASSES AND DATA CLASSES
IEC TR 61850-90-17 : 1ED 2017	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 90-17: USING IEC 61850 TO TRANSMIT POWER QUALITY DATA
I.S. EN 61000-2-12:2003	ELECTROMAGNETIC COMPATIBILITY (EMC) - ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
IEC TR 62001-2 : 1.0	HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - GUIDANCE TO THE SPECIFICATION AND DESIGN EVALUATION OF AC FILTERS - PART 2: PERFORMANCE
IEEE 1159 : 2009	RECOMMENDED PRACTICE FOR MONITORING ELECTRIC POWER QUALITY
CEI EN 60146-1-1 : 2013	SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
CEI EN 61557-12 : 2013	ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 12: PERFORMANCE MEASURING AND MONITORING DEVICES (PMD)
IEC 62933-2-1 : 1ED 2017	ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
CEI EN 61800-4 : 2003	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A/C/ POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV
CEI EN 61850-7-4 : 2010	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 7-4: BASIC COMMUNICATION STRUCTURE - COMPATIBLE LOGICAL NODE CLASSES AND DATA OBJECT CLASSES
CSA C61000-4-30 : 2010	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
NF EN 61000-4-30 : 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
I.S. EN 60146-1-1:2010	SEMICONDUCTOR CONVERTERS - GENERAL REQUIREMENTS AND LINE COMMUTATED CONVERTERS - PART 1-1: SPECIFICATION OF BASIC REQUIREMENTS
I.S. EN 61400-21:2008	WIND TURBINES - PART 21: MEASUREMENT AND ASSESSMENT OF POWER QUALITY CHARACTERISTICS OF GRID CONNECTED WIND TURBINES
BS EN 809:1998+A1:2009	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
BS PD IEC/TR 62001-3 : 2016	HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - GUIDANCE TO THE SPECIFICATION AND DESIGN EVALUATION OF AC FILTERS - PART 3: MODELLING
00/244020 DC : DRAFT SEP 2000	IEC 61800-3 ED.2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS PRODUCT STANDARD INCLUDING SPECIFIC TEST METHODS
BS EN 50240 : 2004
BIS IS 16071 : 2013	HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - GUIDEBOOK TO THE SPECIFICATION AND DESIGN EVALUATION OF A.C. FILTERS
CEI EN 62920 : 1ED 2018	PHOTOVOLTAIC POWER GENERATING SYSTEMS - EMC REQUIREMENTS AND TEST METHODS FOR POWER CONVERSION EQUIPMENT
I.S. EN 61800-3:2005	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004 (EQV))
IEEE 519 : 2014	RECOMMENDED PRACTICES AND REQUIREMENTS FOR HARMONIC CONTROL IN ELECTRICAL POWER SYSTEMS
I.S. EN 61800-4:2003	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A.C. POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV
I.S. EN 50240:2006
IEC PAS 62543 : 1.0	DC TRANSMISSION USING VOLTAGE SOURCED CONVERTERS
IEC 62586-1 : 2ED 2017	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
IEC TR 62001-4 : 1ED 2016	HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - GUIDANCE TO THE SPECIFICATION AND DESIGN EVALUATION OF AC FILTERS - PART 4: EQUIPMENT
IEC TS 62749 : 1ED 2015	ASSESSMENT OF POWER QUALITY - CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC NETWORKS
IEC TR 61000-3-15 : 1.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-15: LIMITS - ASSESSMENT OF LOW FREQUENCY ELECTROMAGNETIC IMMUNITY AND EMISSION REQUIREMENTS FOR DISPERSED GENERATION SYSTEMS IN LV NETWORK
IEC 61000-3-2 REDLINE : 5.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
IEC TR 61000-3-14 : 1.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-14: ASSESSMENT OF EMISSION LIMITS FOR HARMONICS, INTERHARMONICS, VOLTAGE FLUCTUATIONS AND UNBALANCE FOR THE CONNECTION OF DISTURBING INSTALLATIONS TO LV POWER SYSTEMS
IEC 61000-4-30 REDLINE : 3ED 2015	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
IEC PAS 62001 : 1.0	GUIDE TO THE SPECIFICATION AND DESIGN EVALUATION OF A.C. FILTERS FOR HVDC SYSTEMS
IEC 62586-2 : 2017 COR 1 2018	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS
EN 62586-2 : 2017	POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 2: FUNCTIONAL TESTS AND UNCERTAINTY REQUIREMENTS (IEC 62586-2:2017)
IEC TR 62001 : 1.0	HIGH-VOLTAGE DIRECT CURRENT (HVDC) SYSTEMS - GUIDEBOOK TO THE SPECIFICATION AND DESIGN EVALUATION OF A.C. FILTERS
IEC 60969 REDLINE : 2ED 2016	SELF-BALLASTED COMPACT FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES - PERFORMANCE REQUIREMENTS
EN 61800-3 : 2004 AMD 1 2012	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011)
EN ISO 14224 : 2016 COR 2016	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016, CORRECTED VERSION 2016-10-01)
IEC 61850-7-4 : 2.0	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 7-4: BASIC COMMUNICATION STRUCTURE - COMPATIBLE LOGICAL NODE CLASSES AND DATA OBJECT CLASSES
DIN EN 809 : 2012	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
DIN EN 809 E : 2012	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
IEC 62282-3-2 : 1.0	FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
IEC 61000-4-1 : 3.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-1: TESTING AND MEASUREMENT TECHNIQUES - OVERVIEW OF IEC 61000-4 SERIES
IEC 62282-3-200 : 2.0	FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
IEC 60044-8 : 1.0	INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS
BS EN 61800-1 : 1998	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
17/30354643 DC : 0	BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION
IEC 62612 : 2015 COR 1 2016	SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES > 50 V - PERFORMANCE REQUIREMENTS
IEC 61000-4-13 : 1.2	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-13: TESTING AND MEASUREMENT TECHNIQUES - HARMONICS AND INTERHARMONICS INCLUDING MAINS SIGNALLING AT A.C. POWER PORT, LOW FREQUENCY IMMUNITY TESTS
IEC 61869-6 : 1ED 2016	INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
BS EN ISO 14224 : 2016	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
IEC 61000-4-30 : 3.0EN+(REDLINE+VERSION)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
UNE EN 62612 : 2014	SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES > 50 V - PERFORMANCE REQUIREMENTS
IEC 61000-3-12 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE
IEC TR 61869-103 : 1.0	INSTRUMENT TRANSFORMERS - THE USE OF INSTRUMENT TRANSFORMERS FOR POWER QUALITY MEASUREMENT
IEC 61000-2-4 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-4: ENVIRONMENT - COMPATIBILITY LEVELS IN INDUSTRIAL PLANTS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES
IEC 61000-2-12 : 1.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-12: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC MEDIUM-VOLTAGE POWER SUPPLY SYSTEMS
IEC 61800-1 : 1.0	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
BS EN 50156-1 : 2015	ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
IEC 61400-21 : 2.0	WIND TURBINES - PART 21: MEASUREMENT AND ASSESSMENT OF POWER QUALITY CHARACTERISTICS OF GRID CONNECTED WIND TURBINES
EN 61850-7-4 : 2010	COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 7-4: BASIC COMMUNICATION STRUCTURE - COMPATIBLE LOGICAL NODE CLASSES AND DATA OBJECT CLASSES
IEC 61800-4 : 1.0	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 4: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR A.C. POWER DRIVE SYSTEMS ABOVE 1000 V A.C. AND NOT EXCEEDING 35 KV
BS EN 809 : 1998	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
ISO 14224 : 2016	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
EN 809 : 1998 COR 2010	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
EN 809:1998+A1:2009	PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS
DIN EN 61800-1 : 1999-08	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 1: GENERAL REQUIREMENTS; RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS
VDE 0160-101 : 1999-08	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE SPEED D.C. POWER DRIVE SYSTEMS

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60038 : 7.0	IEC STANDARD VOLTAGES
IEC 61000-4-30 : 3.0EN+(REDLINE+VERSION)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-30: TESTING AND MEASUREMENT TECHNIQUES - POWER QUALITY MEASUREMENT METHODS
AS IEC 62040.2:2019	Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements
SA TR IEC 61000.2.5:2019	Electromagnetic compatibility (EMC) Environment - Description and classification of electromagnetic environments
IEC 61000-3-12 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE
IEC 61000-2-2 : 2.1	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-2: ENVIRONMENT - COMPATIBILITY LEVELS FOR LOW-FREQUENCY CONDUCTED DISTURBANCES AND SIGNALLING IN PUBLIC LOW-VOLTAGE POWER SUPPLY SYSTEMS
IEC 60050-161 : 1.0T	INTERNATIONAL ELECTRO-TECHNICAL VOCABULARY - ELECTROMAGNETIC COMPATIBILITY
IEC 61010-1 : 3.1:2017	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CISPR 16-1 : 2.1	SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS
IEC 61000-3-2 : 4.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)

Add To Cart

Product Format

Quantity

add to cart

IEC 61000-4-7 : 2.1

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?