• There are no items in your cart

IEC 61076-2-101:2012

Current
Current

The latest, up-to-date edition.

Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French

Published date

04-20-2012

FOREWORD
1 Scope
2 Normative references
3 Technical information
4 Dimensional information
5 Characteristics
6 Test schedule
Annex A (informative) - Diameter of the female connector body
Annex B (informative) - Steel conduit thread, sizes

IEC 61076-2-101:2012 describes M12 circular connectors typically used for industrial process measurement and control. These connectors consist of fixed and free connectors either rewireable or non-rewireable, with screw-locking. The connectors with glass to metal seal are fixed connectors only which consist of fixed glass to metal sealed styles with rewireable male contacts and are intermateable with corresponding free connectors according to this International Standard. Male connectors have round contacts 0,6 mm, 0,76 mm, 0,8 mm and 1,0 mm. The different codings prevent the mating of these coded male or female connectors to any other interfaces and cross-mating between the different codings. This third edition cancels and replaces the second edition published in 2008 and its corrigendum published in 2010. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- The drawings of some styles have been corrected,
- A new style with maximum 17 poles, with A-coding, has been added, as new applications for the industrial process measurement and control require a high number of poles in M12 circular connectors. The existing styles and dimensions which were specified in IEC 61076-2-101 Ed.2 are further applicable for the added interface dimension of the 17 poles versions,
- Removal of the type designation and ordering information, former Tables 6 and 7 have been updated accordingly and
- Inclusion of the technical content of IEC PAS 61076-2-108, which will be withdrawn after publication of this International Standard. The drawings have been updated and correction to the title of Figure 9 was made. Keywords: M12 connectors, Circular connector

Committee
TC 48/SC 48B
DevelopmentNote
Supersedes IEC PAS 61076-2-108. (07/2012) Stability Date: 2020. (11/2017)
DocumentType
Standard
Pages
118
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

ISO 23570-1:2005 Industrial automation systems and integration Distributed installation in industrial applications Part 1: Sensors and actuators
CEI EN 62026-7 : 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
BS ISO/IEC 11801-1:2017 Information technology. Generic cabling for customer premises General requirements
BS EN 60512-29-100:2015 Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g
CEI EN 61869-6 : 1ED 2017 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
13/30294622 DC : 0 BS EN 61935-2-25 ED.1.0 - GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 - PART 2-25: WORK AREA WITH M12 4 POLES CONNECTORS BLANK DETAIL SPECIFICATION
BS EN 62952-3:2017 Power sources for a wireless communication device Generic energy harvesting adapter module
CEI EN 61754-27 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 27: TYPE M12-FO CONNECTOR FAMILY
CEI EN 61375-3-4 : 2014 ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-4: ETHERNET CONSIST NETWORK (ECN)
I.S. EN 61076-2-107:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
I.S. EN 61869-6:2016 INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS
CEI EN 60512-29-100 : 2016 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G
ISO/IEC 24702:2006 Information technology Generic cabling Industrial premises
EN 61375-2-5 : 2015 Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone
EN 61754-27 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 27: TYPE M12-FO CONNECTOR FAMILY (IEC 61754-27:2013)
EN 61869-6:2016 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
EN 60512-29-100 : 2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
BS EN 61869-6:2016 Instrument transformers Additional general requirements for low-power instrument transformers
BS EN 61076-2-107:2010 Connectors for electronic equipment. Product requirements Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
I.S. EN 61754-27:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 27: TYPE M12-FO CONNECTOR FAMILY (IEC 61754-27:2013 (EQV))
BS EN 62026-7:2013 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) CompoNet
DD IEC/PAS 61076-2-109:2010 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 12 × 1 with screw-locking, for data transmissions with frequencies up to 500 MHz
DD IEC/PAS 61076-2-108:2009 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for glass to metal seal style M12 connectors with screw-locking intended to mate with connectors conforming to IEC 61076-2-101
BS EN 61754-27:2013 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type M12-FO connector family
IEC PAS 61076-2-109:2010 Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors M12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz
CEI EN 50173-1 : 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 60512-29-100:2015 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G
ES 202 336-1 : 1.2.1 ENVIRONMENTAL ENGINEERING (EE); MONITORING AND CONTROL INTERFACE FOR INFRASTRUCTURE EQUIPMENT (POWER, COOLING AND BUILDING ENVIRONMENT SYSTEMS USED IN TELECOMMUNICATION NETWORKS) - PART 1: GENERIC INTERFACE
CEI EN 61131-9 : 2014 PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI)
I.S. EN 62026-7:2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET (IEC 62026-7:2010 (MOD))
EN 50173-1:2011 Information technology - Generic cabling systems - Part 1: General requirements
IEC 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
I.S. EN 61918:2013 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
I.S. EN 50173-1:2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
IEC 61375-3-4:2014 Electronic railway equipment - Train communication network (TCN) - Part 3-4: Ethernet Consist Network (ECN)
06/30151382 DC : DRAFT JUN 2006 BS ISO/IEC 24702 - INFORMATION TECHNOLOGY - GENERIC CABLING - INDUSTRIAL PREMISES
15/30332072 DC : 0 BS EN 62952-3 ED. 1.0 - POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: ENERGY HARVESTING SPECIFICATION
CEI EN 61076-2-107 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
IEEE 61158-2017 IEEE Standard for Industrial Hard Real-Time Communication
CEI EN 62952-3 : 1ED 2018 POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: GENERIC ENERGY HARVESTING ADAPTOR MODULE
BS EN 61375-3-4 : 2014 ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-4: ETHERNET CONSIST NETWORK (ECN) (IEC 61375-3-4:2014)
DD IEC/PAS 61076-2-110:2010 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors M 12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s
BS IEC 60512-29-100 : 2015 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G
10/30227785 DC : 0 BS EN 61076-2-109 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 12 X 1 WITH SCREW-LOCKING, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 500 MHZ
BS EN 50173-1:2011 Information technology. Generic cabling systems General requirements
11/30215548 DC : 0 BS EN 61754-27 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 27: TYPE M12-FO CONNECTOR FAMILY
08/30189288 DC : DRAFT SEP 2008 BS EN 61076-2-107 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING
11/30232069 DC : 0 BS EN 60512-29-100 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G
BS EN 61076-2-109:2014 Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz
16/30346304 DC : 0 BS EN 61162-450 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS -DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION
UNI CEN/TS 13149-8 : 2013 PUBLIC TRANSPORT - ROAD VEHICLE SCHEDULING AND CONTROL SYSTEMS - PART 8: PHYSICAL LAYER FOR IP COMMUNICATION
I.S. EN 61162-450:2011 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION (IEC 61162-450:2011/A1:2016)
IEC 62952-3:2017 Power sources for a wireless communication device - Part 3: Generic energy harvesting adapter module
ISO 23570-2:2005 Industrial automation systems and integration - Distributed installation in industrial applications Part 2: Hybrid communication bus
I.S. EN 61076-2-109:2014 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ
IEC 61935-2-25:2015 Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-25: Work area cord with M12 4 poles connectors - Blank detail specification
IEC PAS 62408:2005 Real-time Ethernet Powerlink (EPL)
IEC 61918:2013 Industrial communication networks - Installation of communication networks in industrial premises
IEC 62026-7:2010 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet
BS EN 61375-2-5:2015 Electronic railway equipment. Train communication network (TCN) Ethernet train backbone
ISO/IEC 14763-4:2018 Information technology Implementation and operation of customer premises cabling Part 4: Measurement of end-to-end (E2E)-Links
DD IEC PAS 62026-7 : DRAFT 2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
16/30325949 DC : 0 BS ISO/IEC 11801-3 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 3: INDUSTRIAL PREMISES
12/30235235 DC : 0 BS EN 61375-2-5 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN BACKBONE - PART 2-5: ETHERNET TRAIN BACKBONE
17/30352734 DC : 0 BS EN 60947-5-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES
11/30207770 DC : 0 BS EN 61375-3-4 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN BUS - PART 3-4: ECN - ETHERNET CONSIST NETWORK
16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
I.S. EN 61375-2-5:2015 ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-5: ETHERNET TRAIN BACKBONE
S.R. CEN/TS 13149-8:2013 PUBLIC TRANSPORT - ROAD VEHICLE SCHEDULING AND CONTROL SYSTEMS - PART 8: PHYSICAL LAYER FOR IP COMMUNICATION
I.S. EN 61375-3-4:2014 ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-4: ETHERNET CONSIST NETWORK (ECN)
IEC PAS 62026-7:2009 Low-voltage switchgear and controlgear - Controller-Device Interfaces (CDIs) - Part 7: CompoNet
IEC 61375-2-5:2014 Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone
BS EN 61918:2013 Industrial communication networks. Installation of communication networks in industrial premises
IEC 61076-2-107:2010 Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
IEC 61076-2-109:2014 Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 x 1 screw-locking, for data transmission frequencies up to 500 MHz
IEC 61131-9:2013 Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI)
BS EN 61131-9:2013 Programmable controllers Single-drop digital communication interface for small sensors and actuators (SDCI)
09/30193787 DC : 0 BS EN 62026-7 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET
IEC 61935-1:2015 Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards
BS IEC 61935-2-25:2015 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 Work area with M12 4 poles connectors. Blank detail specification
PD CEN/TS 13149-8:2013 Public transport. Road vehicle scheduling and control systems Physical layer for IP communication
BS EN 61162-450:2011 Maritime navigation and radiocommunication equipment and systems. Digital interfaces Multiple talkers and multiple listeners. Ethernet interconnection
ISO/IEC 11801-3:2017 Information technology Generic cabling for customer premises Part 3: Industrial premises
SAE J 2839 : 2015 HEAVY DUTY HIGH SPEED DATALINK CONNECTOR
I.S. EN 61131-9:2013 PROGRAMMABLE CONTROLLERS - PART 9: SINGLE-DROP DIGITAL COMMUNICATION INTERFACE FOR SMALL SENSORS AND ACTUATORS (SDCI)
I.S. EN 62952-3:2017 POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: GENERIC ENERGY HARVESTING ADAPTOR MODULE
ISO/IEC 11801-1:2017 Information technology — Generic cabling for customer premises — Part 1: General requirements
NF EN 61375-2-5 : 2015 ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 2-5: ETHERNET TRAIN BACKBONE
IEC PAS 61076-2-110:2010 Connectors for electronic equipment - Product requirements - Part 2-110: Circular connectors - Detail specification for circular connectors M12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s
IEC PAS 61076-2-108:2009 Connectors for electronic equipment - Product requirements - Part 2-108: Circular connectors - Detail specification for glass to metal seal style M12 connectors with screw-locking intended to mate with connectors conforming to IEC 61076-2-101
EN 61918:2013/AC:2014 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED)
IEC 61754-27:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 27: Type M12-FO connector family
11/30258071 DC : 0 BS EN 61918 - INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
IEC 61869-6:2016 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
EN 61076-2-109 : 2014 Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz
CEN/TS 13149-8:2013 Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communication
EN 61375-3-4:2014/A11:2017 ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-4: ETHERNET CONSIST NETWORK (ECN)
EN 61076-2-107 : 2010 Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
EN 62952-3:2017 Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module
EN 61131-9 : 2013 Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI)
EN 62026-7:2013 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet
EN 61162-450:2011/A1:2016 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION

IEC 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
IEC 61984:2008 Connectors - Safety requirements and tests
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC 60068-2-60:2015 RLV Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
AS 11801.3:2019 Information technology - Generic cabling for customer premises Industrial premises (ISO/IEC 11801-3:2017, MOD)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60512-1-100:2012 Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
IEC 60423:2007 Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60050-581:2008 International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
IEC 60998-2-1:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units

View more information
US$348.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.