IEC TR 61931:1998
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
08-19-1998
Provides terminology for the various fibre optic elements, devices and systems.
Committee |
TC 86
|
DevelopmentNote |
Stability date: 2019. (09/2017)
|
DocumentType |
Technical Report
|
Pages |
169
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Standards | Relationship |
SANS 61931:2004(R2021) | Identical |
SANS 61931 : 1ED 2004 | Identical |
BIS IS 16283 : 2014 | Identical |
NEN IEC 61931 : 1998 | Identical |
I.S. EN 61756-1:2006 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR FIBRE MANAGEMENT SYSTEMS - PART 1: GENERAL AND GUIDANCE |
I.S. EN 62343-2:2014 | DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION |
CEI EN 61290-10-4 : 2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-4: MULTICHANNEL PARAMETERS - INTERPOLATED SOURCE SUBTRACTION METHOD USING AN OPTICAL SPECTRUM ANALYZER |
14/30295711 DC : 0 | BS EN IEC 61757-3-1 ED. 1.0 - FIBRE OPTIC SENSORS - PART 3-1: TEMPERATURE MEASUREMENT - DISTRIBUTED SENSING |
CEI EN 61291-1 : 2013 | OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
I.S. EN 61290-3-2:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
IEC 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system |
BS EN 62150-1:2005 | Fibre optic active components and devices. Test and measurement procedures General and guidance |
CEI EN 62074-1 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
08/30175854 DC : DRAFT JAN 2008 | IEC 61746-2 ED1 - CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
BS EN 61755-1:2006 | Fibre optic connector optical interfaces Optical interfaces for single mode non-dispersion shifted fibres. General and guidance |
BS EN 61757-1:2012 | Fibre optic sensors Generic specification |
CEI EN 61753-121-2 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
05/30130532 DC : DRAFT MAR 2005 | CENELEC TR 50460 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - SYSTEM GUIDELINES FOR ANALOGUE OPTICAL TRANSMISSION SYSTEMS |
PD CLC/TR 50460:2005 | Cable networks for television signals, sound signals and interactive services. System guidelines for analogue optical transmission systems |
CEI EN 62522 : 2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
BS EN 61758-1:2008 | Fibre optic interconnecting devices and passive components. Interface standard for closures General and guidance |
I.S. EN 60875-1:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION |
IEC 62807-1:2017 | Hybrid telecommunication cables - Part 1: Generic specification |
I.S. EN 62007-2:2009 | SEMICONDUCTOR OPTOELECTRONIC DEVICES FOR FIBRE OPTIC SYSTEM APPLICATIONS - PART 2: MEASURING METHODS |
I.S. EN 61290-5-2:2004 | OPTICAL AMPLIFIERS - TEST METHODS - PART 5-2: REFLECTANCE PARAMETERS - ELECTRICAL SPECTRUM ANALYSER METHOD |
08/30178192 DC : DRAFT FEB 2008 | BS EN 61753-121-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - TERMINATED CABLE ASSEMBLIES - PART 121-2: PERFORMANCE STANDARD FOR SIMPLEX AND DUPLEX CORDS WITH SINGLE MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
BS EN 61274-1:2012 | Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors Generic specification |
CEI CLC/TR 50460 : 2005 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - SYSTEM GUIDELINES FOR ANALOGUE OPTICAL TRANSMISSION SYSTEMS |
03/300452 DC : DRAFT JAN 2003 | IEC 62150-2 ED.1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS |
BS EN 61290-2-1:1998 | Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Optical spectrum analyzer |
I.S. EN 61757-2-2:2017 | FIBRE OPTIC SENSORS - PART 2-2: TEMPERATURE MEASUREMENT - DISTRIBUTED SENSING |
CEI EN 61746-1 : 2012 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES |
I.S. CLC/TR 50460:2005 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - SYSTEM GUIDELINES FOR ANALOGUE OPTICAL TRANSMISSION SYSTEMS |
09/30203828 DC : 0 | BS EN 62614 - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION |
BS EN 60793-2-60:2008 | Optical fibres Product specifications. Sectional specification for category C single-mode intraconnection fibres |
IEC 62683-1:2017 | Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data |
I.S. EN 62074-1:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
ISO 20780:2018 | Space systems — Fiber optic components — Design and verification requirements |
I.S. EN 62683-1:2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE - PART 1: CATALOGUE DATA |
I.S. EN 61280-4-2:2014 | FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT |
IEC 61280-2-3:2009 | Fibre optic communication subsystem tets procedures - Part 2-3: Digital systems - Jitter and wander measurements |
I.S. EN IEC 61291-1:2018 | OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
I.S. EN 61290-3:2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3: NOISE FIGURE PARAMETERS |
EN 62683-1:2017 | Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data |
I.S. EN 61280-2-1:2010 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 2-1: DIGITAL SYSTEMS - RECEIVER SENSITIVITY AND OVERLOAD MEASUREMENT |
IEC TS 62129-3:2014 | Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs |
CEI EN 61757-1-1 : 1ED 2017 | FIBRE OPTIC SENSORS - PART 1-1: STRAIN MEASUREMENT - STRAIN SENSORS BASED ON FIBRE BRAGG GRATINGS |
IEC 62343-5-2:2018 | Dynamic modules - Part 5-2: Test methods - 1 x N fixed-grid WSS - Dynamic crosstalk measurement |
CEI EN 62614 : 2012 | FIBRE OPTICS - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION |
S.R. CLC/TR 50083-10-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10-1: GUIDELINES FOR THE IMPLEMENTATION OF RETURN PATHS IN CABLE NETWORKS |
IEC 62496-4:2011 | Optical circuit boards - Part 4: Interface standards - General and guidance |
EN 61756-1 : 2006 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR FIBRE MANAGEMENT SYSTEMS - PART 1: GENERAL AND GUIDANCE |
EN 61290-5-3:2002 | Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser |
EN 61290-5-2:2004 | Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method |
EN 62496-1:2009 | Optical circuit boards - Part 1: General |
EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
EN 61280-4-2:2014 | Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
EN 61758-1:2008 | Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance |
EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
EN 61314-1:2012 | Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
EN 62134-1:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
EN 61291-2:2016 | Optical amplifiers - Part 2: Single channel applications - Performance specification template |
EN 61280-4-1:2009 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT |
EN 60793-1-1:2017 | Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance |
EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
EN 62007-2:2009 | Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods |
EN 61753-121-2:2017 | Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment |
EN 61280-2-1:2010 | Fibre optic communication subsystem test procedures - Part 2-1: Digital systems - Receiver sensitivity and overload measurement |
EN 60874-1:2012 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
EN 61290-1:2015 | Optical amplifiers - Test methods - Part 1: Power and gain parameters |
EN 62683:2015 | Low-voltage switchgear and controlgear - Product data and properties for information exchange |
EN 60793-2-60:2008 | Optical fibres - Part 2-60: Product specifications - Sectional specification for category C single-mode intraconnection fibres |
EN 60027-2:2007 | Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics |
EN 61290-7-1:2007 | Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method |
EN 62129-2 : 2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
OVE/ONORM EN 60027-2 : 2007 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS |
10/30207290 DC : 0 | BS EN 62129-2 - CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
BS EN 50152-3-2:2016 | Railway applications. Fixed installations. Particular requirements for a.c. switchgear Measurement, control and protection devices for specific use in a.c. traction systems. Current transformers |
09/30210593 DC : DRAFT SEP 2009 | BS EN 62150-2 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS |
12/30272496 DC | BS EN 61755-1. Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Optical interfaces for single mode non-dispersion shifted fibres. General and guidance |
BS EN 61290-2-2:1998 | Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Electrical spectrum analyzer |
BS EN 61290-3-2:2008 | Optical amplifiers. Test methods Noise figure parameters. Electrical spectrum analyzer method |
13/30285534 DC : 0 | BS EN 61290-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1: OPTICAL POWER AND GAIN PARAMETERS |
10/30212969 DC : 0 | BS EN 62343 - DYNAMIC MODULES - GENERAL AND GUIDANCE |
07/30170301 DC : DRAFT AUG 2007 | BS EN 62007-2 - SEMICONDUCTOR OPTOELECTRONIC DEVICES FOR FIBRE OPTIC SYSTEM APPLICATIONS - PART 2: MEASURING METHODS |
15/30300738 DC : DRAFT MAY 2015 | BS EN 60027-2 ED 4.0 - LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS |
PD IEC TR 61282-1:2000 | Fibre optic communication system design guides Single-mode digital and analogue systems |
17/30361860 DC : DRAFT JUL 2017 | BS EN 62148-21 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 21: DESIGN GUIDE OF ELECTRICAL INTERFACE OF PIC PACKAGES USING SILICON FINE-PITCH BALL GRID ARRAY (S-FBGA) AND SILICON FINE-PITCH LAND GRID ARRAY (S-FLGA) |
17/30335815 DC : 0 | BS EN 61281-1 ED 2.0 - FIBRE OPTIC COMMUNICATION SUBSYSTEMS PART 1: GENERIC SPECIFICATION |
10/30235439 DC : 0 | BS EN 61755-1-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 1-1: OPTICAL INTERFACES FOR 50.0 UM MULTIMODE FIBRE - GENERAL AND GUIDANCE |
03/311628 DC : DRAFT AUG 2003 | IEC 62150-1 ED.1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
BS EN 61291-1:2012 | Optical amplifiers Generic specification |
06/30156187 DC : DRAFT SEP 2006 | BS EN 61753-121-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - TERMINATED CABLE ASSEMBLIES PART - PART 121-2: PERFORMANCE STANDARD FOR SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE OPTIC CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
15/30318620 DC : 0 | BS EN 61291-2 ED 4.0 - OPTICAL AMPLIFIERS - PART 2: SINGLE CHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE |
CEI EN 62150-1 : 2005 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
BS EN 61290-5-2:2004 | Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Electrical spectrum analyser method |
EN 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
IEC 62005-9-2:2007 | Reliability of fibre optic interconnecting devices and passive optical components - Part 9-2: Reliability qualification for single fibre optic connector sets - Single mode |
PD IEC/TR 61292-1:2009 | Optical amplifiers Parameters of amplifier components |
BS EN 61290-5-3:2002 | Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Reflectance tolerance using an electrical spectrum analyser |
08/30175850 DC : DRAFT JAN 2008 | BS IEC 61746-1 - CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES |
09/30211145 DC : 0 | BS EN 60794-1-2 - OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES |
BS EN 61280-2-1:2010 | Fibre optic communication subsystem test procedures Digital systems. Receiver sensitivity and overload measurement |
CEI EN 62343-2 : 2015 | DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION |
07/30168153 DC : 0 | BS EN 60875-1 - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION |
CEI EN 61754-1 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
IEC 61757:2018 | Fibre optic sensors - Generic specification |
UNE-EN 60793-1-1:2017 | Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance |
BS EN 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services Bandwidth expansion for broadcast signal over FTTH system |
BS EN 61290-7-1:2007 | Optical amplifiers. Test methods Out-of-band insertion losses. Filtered optical power meter method |
BS EN 61753-121-2:2017 | Fibre optic interconnecting devices and passive components. Performance standard Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C. Controlled environment |
BS EN 187105:2002 | Single mode optical cable (duct/direct buried installation) |
NF EN 187105 : 2002 | SINGLE-MODE OPTICAL FIBRE CABLE (DUCT/DIRECT BURIED INSTALLATION) |
NF EN 60794-3-11 : 2011 | OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT, DIRECTLY BURIED, AND LASHED AERIAL SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
11/30240648 DC : 0 | BS EN 60794-1-20 - OPTICAL FIBRE CABLES - PART 1-20: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL AND DEFINITIONS |
BS EN 60027-2:2007 | Letter symbols to be used in electrical technology Telecommunications and electronics |
06/30153342 DC : DRAFT JULY 2006 | BS IEC 61746 - CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1 - OTDR FOR SINGLE-MODE FIBRES |
10/30218221 DC : 0 | BS EN 61314-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
BS EN 61290-1-2:2005 | Optical amplifiers. Test methods Power and gain parameters - Electrical spectrum analyzer method |
BS EN 61746:2005 | Calibration of optical time-domain reflectometers (OTDR) |
BS EN 61757-2-2:2017 | Fibre optic sensors Temperature measurement. Distributed sensing |
98/261559 DC : DRAFT MAY 1998 | IEC 61290-3 EDITION 1 - BASIC SPECIFICATION FOR OPTICAL FIBRE AMPLIFIER TEST METHODS - PART 3-1: TEST METHODS FOR NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER TEST METHOD |
EN IEC 62343-5-2:2018 | Dynamic modules - Part 5-2: Test methods - 1xN fixed-grid WSS - Dynamic crosstalk measurement |
CEI EN 61073-1 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
BS EN 61291-2:2016 | Optical amplifiers Single channel applications. Performance specification template |
CEI EN 61314-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
CEI EN 62007-2 : 2010 | SEMICONDUCTOR OPTOELECTRONIC DEVICES FOR FIBRE OPTIC SYSTEM APPLICATIONS - PART 2: MEASURING METHODS |
BS EN 61978-1:2014 | Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators Generic specification |
CEI EN 61290-1-2 : 2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
IEC TR 61930:1998 | Fibre optic graphical symbology |
CSA ISO/IEC 14763-1 : 2002 | INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 1: ADMINISTRATION |
I.S. EN 61314-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION (IEC 61314-1:2011 (EQV)) |
CEI EN 60794-3-11 : 2012 | OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT, DIRECTLY BURIED AND LASHED AERIAL SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
I.S. EN 62129-2:2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
BIS IS 14976 : 2012 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
I.S. EN 62134-1:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
I.S. EN 60027-2:2007 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS |
I.S. EN 60794-3-11:2010 | OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT, DIRECTLY BURIED AND LASHED AERIAL SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
I.S. EN IEC 62343-5-2:2018 | DYNAMIC MODULES - PART 5-2: TEST METHODS - 1XN FIXED-GRID WSS - DYNAMIC CROSSTALK MEASUREMENT |
I.S. EN 60728-6:2011 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT |
IEC TS 62538:2008 | Categorization of optical devices |
I.S. EN 62496-4:2011 | OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE |
I.S. EN 62683:2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE |
I.S. EN 61280-2-3:2009 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 2-3: DIGITAL SYSTEMS - JITTER AND WANDER MEASUREMENTS |
I.S. EN 61746-1:2011 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES |
I.S. EN 60794-1-20:2014 | OPTICAL FIBRE CABLES - PART 1-20: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL AND DEFINITIONS |
BS EN 60875-1:2015 | Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices Generic specification |
NF EN 62129-2 : 2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
I.S. EN 61291-2:2016 | OPTICAL AMPLIFIERS - PART 2: SINGLE CHANNEL APPLICATIONS - PERFORMANCE SPECIFICATION TEMPLATE |
IEC TS 62627-09:2016 | Fibre optic interconnecting devices and passive components - Vocabulary for passive optical devices |
IEC 60794-1-1 REDLINE : 4ED 2015 | OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
IEC TR 60728-6-1:2006 | Cable networks for television signals, sound signals and interactive services - Part 6-1: System guidelines for analogue optical transmission systems |
IEC 61280-4-1:2009 | Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement |
17/30345069 DC : 0 | BS EN 60793-2-10 - OPTICAL FIBRES - PART 2-10: PRODUCT SPECIFICATIONS - SECTIONAL SPECIFICATION FOR CATEGORY A1 MULTIMODE FIBRES |
CEI EN 61753-121-3 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLEMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
I.S. EN 61290-7-1:2007 | OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD |
BS EN 62074-1:2014 | Fibre optic interconnecting devices and passive components. Fibre optic WDM devices Generic specification |
BS EN 61280-4-2:2014 | Fibre-optic communication subsystem test procedures Installed cable plant. Single-mode attenuation and optical return loss measurement |
EN 61290-1-3:2015 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
NF EN 62496-1 : 2009 | OPTICAL CIRCUIT BOARDS - PART 1: GENERAL |
12/30259955 DC : 0 | BS EN 61754-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
I.S. EN 60728-13-1:2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13-1: BANDWIDTH EXPANSION FOR BROADCAST SIGNAL OVER FTTH SYSTEM |
NF EN 62149-5 : 2011 | FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
11/30241337 DC : DRAFT JAN 2011 | BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION |
BS EN 61280-2-3:2009 | Fibre optic communication subsystem test procedures Digital systems. Jitter and wander measurements |
PD IEC/TS 62129-3:2014 | Calibration of wavelength/optical frequency measurement instruments Optical frequency meters using optical frequency combs |
BS EN 60794-2:2017 | Optical fibre cables Indoor cables. Sectional specification |
I.S. EN 61290-1-2:2006 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
UNE-EN 60794-1-20:2014 | Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions |
BS EN 60794-1-20:2014 | Optical fibre cables Generic specification. Basic optical cable test procedures. General and definitions |
I.S. EN 62614:2010 | FIBRE OPTICS - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION |
07/30164411 DC : 0 | EN 61314-1 - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
BS EN 62496-1:2009 | Optical circuit boards General |
14/30297431 DC : 0 | BS EN 60875-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION |
04/30126747 DC : DRAFT DEC 2004 | IEC 60874-1 ED.5 - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
07/30161447 DC : 0 | BS EN 61753-121-3 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - TERMINATED CABLE ASSEMBLIES - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE MODE FIBRE OPTIC CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
CEI EN 61280-4-1 : 2011 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT |
BS EN IEC 61281-1:2018 | Fibre optic communication subsystems Generic specification |
BS EN 62149-5:2011 | Fibre optic active components and devices. Performance standards ATM-PON transceivers with LD driver and CDR ICs |
08/30169101 DC : 0 | BS EN 61978-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION |
I.S. EN 61753-121-3:2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
I.S. EN 60874-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV)) |
04/30125171 DC : DRAFT NOV 2004 | IEC 61758-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE |
DD IEC/PAS 61290-3-1:2002 | Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer |
15/30294923 DC : 0 | BS EN 61291-5-2 ED2.0 - OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS |
11/30243242 DC : 0 | BS EN 62005-9-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - RELIABILITY - PART 9-2: RELIABILITY QUALIFICATION FOR SINGLE FIBRE OPTIC CONNECTOR SETS - SINGLE MODE |
07/30163800 DC : 0 | BS EN 61290-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 3: NOISE FIGURE PARAMETERS |
18/30342107 DC : DRAFT APR 2018 | BS EN 61315 - CALIBRATION OF FIBRE-OPTIC POWER METERS |
BIS IS/IEC 60793-1-1 : 2008 | OPTICAL FIBRES - PART 1: MEASUREMENT METHODS AND TEST PROCEDURES - SECTION 1: GENERAL AND GUIDANCE |
I.S. EN 61315:2006 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
CEI EN 60728-13 : 2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
BS EN 61290-6-1:1998 | Optical fibre amplifiers. Basic specification Test methods for pump leakage parameters. Optical demultiplexer |
CEI EN 50411-2 : 2010 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
BS EN 60793-1-1:2017 | Optical fibres Measurement methods and test procedures. General and guidance |
09/30206090 DC : 0 | BS EN 62496-4 - OPTICAL CIRCUIT BOARDS - INTERFACE STANDARDS - PART 4: GENERAL AND GUIDANCE |
04/30110918 DC : DRAFT MAR 2004 | IEC 61290-1-2 ED 2.0 - OPTICAL AMPLIFIER TEST METHODS - PART 1-2: OPTICAL POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD |
IEC PAS 62074-1:2007 | Fibre optic WDM devices - Part 1: Generic specification |
14/30311375 DC : 0 | BS EN 61753-121-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
IEC 61290-4-4:2018 | Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control |
IEC PAS 62614:2009 | Fibre optics - Launch condition requirements for measuring multimode attenuation |
EN 60728-13-1:2017 | Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system |
CEI EN 61280-2-1 : 2011 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 2-1: DIGITAL SYSTEMS - RECEIVER SENSITIVITY AND OVERLOAD MEASUREMENT |
I.S. EN IEC 61281-1:2018 | FIBRE OPTIC COMMUNICATION SUBSYSTEMS - PART 1: GENERIC SPECIFICATION |
CEI EN 62150-2 : 2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS |
I.S. EN 60794-1-1:2016 | OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL |
I.S. EN 61290-3-1:2003 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3-1: NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD |
I.S. EN 61978-1:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION |
I.S. EN 61290-1-3:2015 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD |
I.S. EN 60794-2:2017 | OPTICAL FIBRE CABLES - PART 2: INDOOR CABLES - SECTIONAL SPECIFICATION |
IEC 61757-1-1:2016 | Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings |
EN 61757-2-2:2017 | Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing |
NF EN 62134-1 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
IEC 62522:2014 | Calibration of tuneable laser sources |
IEC PAS 61290-3-1:2002 | Optical fibre amplifiers - Basic specification - Part 3-1: Test methods for noise figure parameters - Optical spectrum analyzer |
EN 62343:2017 | Dynamic modules - General and guidance |
EN 61755-1:2006/corrigendum:2006 | FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 1: OPTICAL INTERFACES FOR SINGLE MODE NON-DISPERSION SHIFTED FIBRES - GENERAL AND GUIDANCE |
IEC 60793-1-1:2017 | Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance |
IEC 61290-10-4:2007 | Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer |
IEC 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
IEC 61754-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |
IEC 60027-2:2005 | Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics |
IEC 61755-1:2005 | Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance |
IEC 61978-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification |
EN 62149-5:2011 | Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs |
IEC 60794-1-1:2015 RLV | Optical fibre cables - Part 1-1: Generic specification - General |
OVE/ONORM EN 61315 : 2006 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
BS EN 62129-2:2011 | Calibration of wavelength/optical frequency measurement instruments Michelson interferometer single wavelength meters |
10/30240050 DC : DRAFT DEC 2010 | BS EN 61280-4-2 - FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLEMODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT |
BS EN 62343:2013 | Dynamic modules. General and guidance |
BS EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology |
CEI EN 61290-6-1 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - TEST METHODS FOR PUMP LEAKAGE PARAMETERS - OPTICAL DEMULTIPLEXER |
11/30244353 DC : 0 | BS EN 61753-123-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 123-2: SIMPLEX AND DUPLEX REFERENCE CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS |
BS EN 61280-4-1:2009 | Fibre optic communication subsystem test procedures Installed cable plant. Multimode attenuation measurement |
03/308367 DC : DRAFT JUNE 2003 | IEC 61756-1 ED 1.0 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR FIBRE MANAGEMENT SYSTEMS - PART 1: GENERAL AND GUIDANCE |
CEI EN 61746-2 : 2012 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
04/30110909 DC : DRAFT MAR 2004 | IEC 61291-1 ED 2.0 - OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
EN IEC 61281-1:2018 | Fibre optic communication subsystems - Part 1: Generic specification |
BS EN 62150-2:2011 | Fibre optic active components and devices. Test and measurement procedures ATM-PON transceivers |
BS EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems. Product specifications General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
DD IEC PAS 62074-1 : DRAFT NOV 2007 | FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
BS EN 61314-1:2012 | Fibre optic interconnecting devices and passive components. Fibre optic fan-outs Generic specification |
PD CLC/TR 50083-10-1:2014 | Cable networks for television signals, sound signals and interactive services Guidelines for the implementation of return paths in cable networks |
PD IEC/TS 62627-09:2016 | Fibre optic interconnecting devices and passive components. Vocabulary for passive optical devices Terminology of passive optical devices |
BS EN 61746-2:2011 | Calibration of optical time-domain reflectometers (OTDR) OTDR for multimode fibres |
BS EN 61290-1:2015 | Optical amplifiers. Test methods Power and gain parameters |
ISO/IEC 14763-1:1999 | Information technology Implementation and operation of customer premises cabling Part 1: Administration |
CEI EN 61756-1 : 2007 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR FIBRE MANAGEMENT SYSTEMS - PART 1: GENERAL AND GUIDANCE |
07/30170352 DC : DRAFT AUG 2007 | BS EN 50411-2 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES AND MICRODUCT CONNECTORS |
BS EN 61756-1:2006 | Fibre optic interconnecting devices and passive components. Interface standard for fibre management systems General and guidance |
DIN VDE 0888-6 : 1999 | OPTICAL FIBRE CABLES FOR COMMUNICATION SYSTEMS - PART 6: INDOOR CABLES WITH SEVERAL FIBRES |
BS EN 60794-3-11:2010 | Optical fibre cables Outdoor cables. Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables |
12/30259951 DC : 0 | BS EN 62074-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
BIS IS 16282 : 2014 | FIBRE OPTIC GRAPHICAL SYMBOLOGY |
BS EN 62522:2014 | Calibration of tuneable laser sources |
CEI EN 60793-1-1 : 2010 | OPTICAL FIBRES - PART 1-1: MEASUREMENT METHODS AND TEST PROCEDURES - GENERAL AND GUIDANCE |
BS EN 61290-10-4:2007 | Optical amplifiers. Test methods Multichannel parameters. Interpolated source subtraction method using an optical spectrum analyzer |
11/30249050 DC : 0 | BS EN 61291-1 - OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION |
DIN VDE 0888-5 : 1999 | OPTICAL FIBRE CABLES FOR COMMUNICATION SYSTEMS - PART 5: OUTDOOR FAN OUT CABLES |
03/309903 DC : DRAFT JUNE 2003 | IEC 61315 ED.2.0 - CALIBRATION OF FIBRE-OPTIC POWER METERS |
CLC/TR 50083-10-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 10-1: Guidelines for the implementation of return paths in cable networks |
BS EN 62496-4:2011 | Optical circuit boards Interface standards. General and guidance |
CEI EN 61290-2-2 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PART 2-2: TEST METHODS FOR OPTICAL POWER PARAMETERS - ELECTRICAL SPECTRUM ANALYZER |
BS EN 61290-3-1:2003 | Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer method |
I.S. EN 62343:2017 | DYNAMIC MODULES - GENERAL AND GUIDANCE |
NF EN 61753-121-3 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
BS EN 62007-2:2009 | Semiconductor optoelectronic devices for fibre optic system applications Measuring methods |
NF EN 60027-2 : 2007 | LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS |
CSA ISO/IEC 14763-1 : 2002 : R2010 | INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 1: ADMINISTRATION |
I.S. EN 61280-4-1:2009 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT |
CLC/TR 50460:2005 | Cable networks for television signals, sound signals and interactive services - System guidelines for analogue optical transmission systems |
EN IEC 61291-1:2018 | Optical amplifiers - Part 1: Generic specification |
CEI EN 61315 : 2007 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
I.S. EN 60728-14:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY |
I.S. EN 60793-2-60:2008 | OPTICAL FIBRES - PART 2-60: PRODUCT SPECIFICATIONS - SECTIONAL SPECIFICATION FOR CATEGORY C SINGLE-MODE INTRACONNECTION FIBRES |
CEI EN 61290-7-1 : 2008 | OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD |
BS EN 62683:2015 | Low-voltage switchgear and controlgear. Product data and properties for information exchange |
IEC 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
CEI EN 60874-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
CEI EN 61755-1 : 2006 | FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 1: OPTICAL INTERFACES FOR SINGLE MODE NON-DISPERSION SHIFTED FIBRES - GENERAL AND GUIDANCE |
IEC TR 61292-1:1998 | Fibre optics - Parameters of amplifier components |
I.S. EN 61753-121-2:2017 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 121-2: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
I.S. EN 50411-2:2008 | FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2: GENERAL AND GUIDANCE FOR OPTICAL FIBRE CABLE JOINT CLOSURES, PROTECTED MICRODUCT CLOSURES, AND MICRODUCT CONNECTORS |
IEC 62134-1:2009 | Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification |
I.S. EN 61746-2:2011 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
EN 61746-1:2011/AC:2014 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES (IEC 61746-1:2009) |
EN 61280-2-3:2009/corrigendum:2010 | FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 2-3: DIGITAL SYSTEMS - JITTER AND WANDER MEASUREMENTS |
EN 61746-2:2011/AC:2014 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
IEC 62150-2:2010 | Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers |
IEC 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
IEC 62614:2010 | Fibre optics - Launch condition requirements for measuring multimode attenuation |
IEC 62007-2:2009 | Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods |
IEC 61280-2-1:2010 | Fibre optic communication subsystem test procedures - Part 2-1: Digital systems - Receiver sensitivity and overload measurement |
IEC 61756-1:2006 | Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance |
IEC 61291-2:2016 | Optical amplifiers - Part 2: Single channel applications - Performance specification template |
IEC 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
IEC 60793-2-60:2008 | Optical fibres - Part 2-60: Product specifications - Sectional specification for category C single-mode intraconnection fibres |
IEC 61290-5-2:2003 | Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method |
IEC 61746-1:2009 | Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single mode fibres |
13/30292412 DC : 0 | BS EN 62683 - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE |
IEC 60874-1:2011 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
IEC 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
IEC 61314-1:2011 | Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
IEC 62149-5:2009 | Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs |
IEC 60875-1:2015 | Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
IEC 60728-6:2011 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
IEC 61746:2005 | Calibration of optical time-domain reflectometers (OTDR) |
IEC 61290-1-3:2015 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
IEC 61274-1:2011 | Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification |
IEC 62496-1:2008 | Optical circuit boards - Part 1: General |
IEC 60793-1-1 : 2017 | OPTICAL FIBRES - PART 1-1: MEASUREMENT METHODS AND TEST PROCEDURES - GENERAL AND GUIDANCE |
IEC 61315:2005 | Calibration of fibre-optic power meters |
IEC 62074-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification |
IEC 61280-4-2:2014 | Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
IEC 62150-1:2005 | Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance |
IEC 62129-2:2011 | Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters |
IEC 61290-3:2008 | Optical amplifiers - Test methods - Part 3: Noise figure parameters |
IEC 61758-1:2008 | Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance |
IEC 61757-1:2012 | Fibre optic sensors - Part 1: Generic specification |
IEC 61290-1-2:2005 | Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
IEC 61290-7-1:2007 | Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method |
BS EN 62134-1:2009 | Fibre optic interconnecting devices and passive components. Fibre optic closures Generic specification |
BS EN 61746-1:2011 | Calibration of optical time-domain reflectometers (OTDR) OTDR for single-mode fibres |
BS EN 62683-1:2017 | Low-voltage switchgear and controlgear. Product data and properties for information exchange Catalogue data |
BS EN 61315:2006 | Calibration of fibre-optic power meters |
I.S. EN 61757-1-1:2017 | FIBRE OPTIC SENSORS - PART 1-1: STRAIN MEASUREMENT - STRAIN SENSORS BASED ON FIBRE BRAGG GRATINGS |
I.S. EN 60728-13:2010 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
10/30217980 DC : 0 | BS EN 61753-122-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 122-2: SIMPLEX AND DUPLEX CORDS WITH MULTIMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
BS EN 61290-1-3:2015 | Optical amplifiers. Test methods Power and gain parameters. Optical power meter method |
BS EN 60728-6:2011 | Cable networks for television signals, sound signals and interactive services Optical equipment |
BS EN 60728-13:2010 | Cable networks for television signals, sound signals and interactive services Optical systems for broadcast signal transmissions |
08/30178196 DC : DRAFT FEB 2008 | BS EN 61753-121-3 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - TERMINATED CABLE ASSEMBLIES - PART 121-3: PERFORMANCE STANDARD FOR SIMPLEX AND DUPLEX CORDS WITH SINGLE MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
10/30218225 DC : 0 | BS EN 60874-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
11/30247511 DC : 0 | BS EN 61753-124-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PART 124-2: SIMPLEX AND DUPLEX REFERENCE CORDS WITH MULTIMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT |
BS EN 62614:2010 | Fibre optics. Launch condition requirements for measuring multimode attenuation |
14/30296100 DC : 0 | BS EN 61290-1-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: OPTICAL POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD |
BS EN 62343-2:2014 | Dynamic modules Reliability qualification |
BS EN 61073-1:2009 | Fibre optic interconnecting devices and Passive components. Mechanical splices and fusion splice protectors for optical fibres and cables Generic specification |
10/30218213 DC : 0 | BS EN 61274-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION |
I.S. EN 62149-5:2011 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
09/30197559 DC : 0 | BS EN 60794-3-11 ED.2 - OPTICAL FIBRE CABLES - PART 3-11: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR DUCT AND DIRECTLY BURIED SINGLE-MODE OPTICAL FIBRE TELECOMMUNICATION CABLES |
BS EN 61754-1:2013 | Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces General and guidance |
13/30288119 DC : 0 | BS EN 61757-2-1 - FIBRE OPTIC SENSORS - STRAIN MEASUREMENT - PART 2-1: FIBRE BRAGG GRATINGS |
16/30334639 DC : 0 | BS EN 60793-1-1 ED 4.0 - OPTICAL FIBRES - PART 1-1: MEASUREMENT METHODS AND TEST PROCEDURES - GENERAL AND GUIDANCE |
08/30185648 DC : 0 | BS EN 60728-13 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS |
15/30332693 DC : 0 | BS EN 60794-2 - OPTICAL FIBRE CABLES - PART 2: INDOOR OPTICAL FIBRE CABLES - SECTIONAL SPECIFICATIONS |
BS EN 61753-121-3:2010 | Fibre optic interconnecting devices and passive components. Performance standard Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U. Uncontrolled environment |
07/30172547 DC : 0 | BS EN 62074-1 - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
DIN VDE 0888-4 : 1999 | OPTICAL FIBRE CABLES FOR COMMUNICATION SYSTEMS - PART 4: INDOOR CABLES WITH ONE FIBRE |
13/30280815 DC : 0 | BS EN 62343-2 - DYNAMIC MODULES - PART 2: RELIABILITY QUALIFICATION |
I.S. EN 62150-2:2011 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 2: ATM-PON TRANSCEIVERS |
04/30125584 DC : DRAFT NOV 2004 | IEC 61274-1 ED 2 - ADAPTORS FOR OPTICAL FIBRES AND CABLES - PART 2: GENERIC SPECIFICATION |
I.S. EN 62522:2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
UNE-EN 62683:2016 | Low-voltage switchgear and controlgear - Product data and properties for information exchange |
BS EN 61290-3:2008 | Optical amplifiers. Test methods Noise figure parameters |
I.S. EN 187105:2002 | SINGLE MODE OPTICAL CABLE (DUCT/DIRECT BURIED INSTALLATION) |
DD IEC/TS 62538:2009 | Categorization of optical devices |
BS EN 60874-1:2012 | Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables Generic specification |
IEC TR 61282-1:2000 | Fibre optic communication system design guides - Part 1: Single-mode digital and analogue systems |
CEI EN 61290-3 : 2010 | OPTICAL AMPLIFIERS - TEST METHODS - PART 3: NOISE FIGURE PARAMETERS |
I.S. EN 61291-1:2012 | OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION (IEC 61291-1:2012 (EQV)) |
CEI EN 62496-4 : 2012 | OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE |
IEC 61753-121-2:2017 | Fibre optic interconnecting devices and passive components - Performance standard - Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C - Controlled environment |
CEI EN 62149-5 : 2012 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS |
I.S. EN 61758-1:2008 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE |
I.S. EN 62150-1:2005 | FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE |
CEI EN 62134-1 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
I.S. EN 61274-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV)) |
BS EN 60794-1-1:2016 | Optical fibre cables Generic specification. General |
I.S. EN 61290-1:2015 | OPTICAL AMPLIFIERS - TEST METHODS - PART 1: POWER AND GAINPARAMETERS |
IEC 60793-1-1:2017 RLV | Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance |
CEI EN 61290-2-3 : 1999 | OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PARTS 2-3: TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL POWER METER |
IEC 61281-1:2017 | Fibre optic communication subsystems - Part 1: Generic specification |
I.S. EN 61754-1:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
I.S. EN 62496-1:2009 | OPTICAL CIRCUIT BOARDS - PART 1: GENERAL |
I.S. EN 60793-1-1:2017 | OPTICAL FIBRES - PART 1-1: MEASUREMENT METHODS AND TEST PROCEDURES - GENERAL AND GUIDANCE |
I.S. EN 61290-10-4:2007 | OPTICAL AMPLIFIERS - TEST METHODS - PART 10-4: MULTICHANNEL PARAMETERS - INTERPOLATED SOURCE SUBTRACTION METHOD USING AN OPTICAL SPECTRUM ANALYZER |
I.S. EN 61746:2005 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) |
IEC 61073-1:2009 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
IEC 60794-1-1:2015 | Optical fibre cables - Part 1-1: Generic specification - General |
IEC 61290-1:2014 | Optical amplifiers - Test methods - Part 1: Power and gain parameters |
IEC 61746-2:2010 | Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres |
IEC 60794-3-11:2010 | Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables |
IEC 61753-121-3:2010 | Fibre optic interconnecting devices and passive components - Performance standard - Part 121-3: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U - Uncontrolled environment |
IEC 61290-5-3:2002 | Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer |
EN 61753-121-3 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 121-3: SIMPLEX AND DUPLEX CORDS WITH SINGLE-MODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT |
EN 60794-1-20:2014 | Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions |
EN 61978-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification |
EN 60875-1:2015 | Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
EN 61290-3-1:2003 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method |
EN 61757-1 : 2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012) |
EN 62150-2:2011 | Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers |
EN 62074-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification |
EN 50411-2:2008 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2: General and guidance for optical fibre cable joint closures, protected microduct closures, and microduct connectors |
EN 61290-1-2:2005 | Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
EN 60794-3-11:2010 | Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables |
EN 61746:2005 | Calibration of optical time-domain reflectometers (OTDR) |
EN 61290-3-2:2008 | Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method |
EN 187105:2002 | Single mode optical cable (duct/direct buried installation) |
EN 62343-2:2014 | Dynamic modules - Part 2: Reliability qualification |
EN 61291-1:2012 | Optical amplifiers - Part 1: Generic specification |
EN 60728-6:2011 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
EN 62150-1:2005 | Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance |
EN 61290-3:2008 | Optical amplifiers - Test methods - Part 3: Noise figure parameters |
EN 61274-1:2012 | Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification |
EN 62496-4:2011 | Optical circuit boards - Part 4: Interface standards - General and guidance |
EN 62522:2014 | Calibration of tuneable laser sources |
EN 61315:2006 | Calibration of fibre-optic power meters |
EN 61290-10-4:2007 | Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer |
EN 61754-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |
EN 61073-1:2009 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
EN 62614 : 2010 | FIBRE OPTICS - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION |
IEC 60050-731:1991 | International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.