IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
IEC 60998-1:2002
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
|
IEC 60228:2004
|
Conductors of insulated cables
|
IEC 60664-4:2005
|
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
|
IEC 60695-1-30:2017
|
Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines
|
IEC 60364-5-51:2005
|
Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
|
IEC 60695-2-11:2014
|
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
|
IEC 60068-2-31:2008
|
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
|
ISO 2081:2008
|
Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel
|
IEC 60695-2-13:2010+AMD1:2014 CSV
|
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
|
ISO 1456:2009
|
Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
|
IEC 60695-2-12:2010+AMD1:2014 CSV
|
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials
|
IEC GUIDE 104:2010
|
The preparation of safety publications and the use of basic safety publications and group safety publications
|
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
|
ISO 2093:1986
|
Electroplated coatings of tin — Specification and test methods
|
IEC 60669-1:2017
|
Switches for household and similar fixed-electrical installations - Part 1: General requirements
|
IEC 60664-5:2007
|
Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
|
ISO 4892-2:2013
|
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
|
IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV
|
Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
|
IEC 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
|
IEC 60664-3:2016
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
|
IEC 60587:2007
|
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
|
IEC 60695-10-2:2014
|
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
|
IEC 61032:1997
|
Protection of persons and equipment by enclosures - Probes for verification
|
IEC 60695-2-10:2013
|
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
|
IEC TR 60664-2-1:2011
|
Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
IEC 60998-2-1:2002
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
|