IEEE 344-2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
10-11-2021
English
11-22-2013
1 Overview
2 Normative references
3 Definitions
4 General discussion of earthquake environment and equipment
response
5 Seismic qualification approach
6 Damping
7 Analysis
8 Testing
9 Combined analysis and testing
10 Experience
11 Documentation
Annex A (informative) - Measurement of zero period acceleration
Annex B (informative) - Frequency content and stationarity
Annex C (informative) - Fragility testing
Annex D (informative) - Test duration and number of cycles
Annex E (informative) - Statistically independent motions
Annex F (informative) - Bibliography
Specifies methods for establishing seismic qualification procedures that will yield quantitative data to demonstrate that the equipment can meet its performance requirements.
Committee |
Nuclear Power Engineering Committee
|
DocumentType |
Standard
|
Pages |
74
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
CSA N289.1 : 2008 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
IEEE 497-2010 | IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations |
IEEE DRAFT 382 : D05 2006 | QUALIFICATION OF SAFETY-RELATED ACTUATORS FOR NUCLEAR POWER GENERATING STATIONS |
ANS 56.5 : 79(R1987) | PWR AND BWR CONTAINMENT SPRAY SYSTEM DESIGN CRITERIA |
IEEE DRAFT 387 : D9A MAR 95 | DRAFT STANDARD CRITERIA FOR DIESEL-GENERATOR UNITS APPLIED AS STANDBY POWER SUPPLIES FOR NUCLEAR POWER GENERATING STATIONS |
CSA N289.4 : 2012 | TESTING PROCEDURES FOR SEISMIC QUALIFICATION OF NUCLEAR POWER PLANT STRUCTURES, SYSTEMS, AND COMPONENTS |
ANS 56.6 : 1986 | VENTILATION SYSTEMS, PRESSURIZED WATER REACTOR CONTAINMENT |
CEI 45-100 : 1ED 2018 | TECHNICAL GUIDE FOR THE SEISMIC QUALIFICATION OF ALTERNATING CURRENT GENERATING SETS DRIVEN BY INTERNAL COMBUSTION ENGINES |
IEEE DRAFT C57.16 : D10 AUG 95 | TERMINOLOGY AND TEST CODE FOR DRY-TYPE AIR-CORE SERIES CONNECTED REACTORS |
IEEE 382-2006 | IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations |
IEEE C37.20.2-2015 | IEEE Standard for Metal-Clad Switchgear |
IEEE 693-2005 | IEEE Recommended Practice for Seismic Design of Substations |
IEEE DRAFT 833 : D3 2004 | PRACTICE FOR THE PROTECTION OF ELECTRIC EQUIPMENT IN NUCLEAR POWER GENERATING STATIONS FROM WATER HAZARDS |
IEEE C37.23-2003 | IEEE Standard for Metal-Enclosed Bus |
IEEE 650-2006 | IEEE Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations |
ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
ANS 59.2 : 1985 | NUCLEAR POWER PLANTS - HVAC SYSTEMS LOCATED OUTSIDE PRIMARY CONTAINMENT, SAFETY CRITERIA FOR, |
ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
ASME QME 1 : 2017 | QUALIFICATION OF ACTIVE MECHANICAL EQUIPMENT USED IN NUCLEAR FACILITIES |
18/30376682 DC : DRAFT APR 2018 | BS IEC/IEEE 63113 - NUCLEAR FACILITIES - INSTRUMENTATION IMPORTANT TO SAFETY - SPENT FUEL POOL INSTRUMENTATION |
IEEE/ANSI N42.4-1971 | American National Standard for High Voltage Connectors for Nuclear Instruments |
ASCE 25 06 : 2008 | EARTHQUAKE ACTUATED AUTOMATIC GAS SHUTOFF DEVICES |
IEEE 334 : 2007 | QUALIFYING CONTINUOUS DUTY CLASS 1E MOTORS FOR NUCLEAR POWER GENERATING STATIONS |
15/30249614 DC : 0 | BS IEC/IEEE 60780-323 ED 1.0 - NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION |
17/30357475 DC : 0 | BS IEC/IEEE 63113 - NUCLEAR FACILITIES - INSTRUMENTATION IMPORTANT TO SAFETY - SPENT FUEL POOL INSTRUMENTATION |
BS IEC/IEEE 60780-323 : 2016 | NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION |
CSA N290.1 : 2013 | REQUIREMENTS FOR THE SHUTDOWN SYSTEMS OF CANDU NUCLEAR POWER PLANTS |
ASCE 25 97 : 1999 | EARTHQUAKE-ACTUATED AUTOMATIC GAS SHUTOFF DEVICES |
IEEE C37.81-1989 | IEEE Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies |
ISA 67.03 : 1982 | STANDARD FOR LIGHT WATER REACTOR COOLANT PRESSURE BOUNDARY LEAK DETECTION |
IEC 63147:2017 | Criteria for accident monitoring instrumentation for nuclear power generating stations |
ASCE 7 02 : 2003 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
IEEE/IEC 60780-323-2016 | IEC/IEEE International Standard - Nuclear facilities -- Electrical equipment important to safety -- Qualification |
IEEE 497-2016 | IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations |
IEEE C37.81-2017 | IEEE Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies |
IEEE/IEC 63147-2017 | IEEE/IEC International Standard - Criteria for accident monitoring instrumentation for nuclear power generating stations |
IEEE 387-2017 | IEEE Standard for Criteria for Diesel Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations |
IEEE 627-2019 | IEEE Standard for Qualification of Equipment Used in Nuclear Facilities |
IEEE 628-2020 | IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations |
IEEE 535-2013 | IEEE Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations |
IEEE 572-2006 | IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations |
IEEE 638-2013 | IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations |
ASCE 7 98 : 2000 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
IEEE C37.105 : 2010 | QUALIFYING CLASS 1E PROTECTIVE RELAYS AND AUXILIARIES FOR NUCLEAR POWER GENERATING STATIONS |
ANS 56.7 : 78(R1987) | VENTILATION SYSTEMS, BOILING WATER REACTOR CONTAINMENT |
N289.1-08 (R2013) | General requirements for seismic design and qualification of CANDU nuclear power plants |
CSA N289.1 : 2008 : INC : UPD 1 : 2014: R201300 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
CSA N289.1 : 2008 : INC : UPD 1 : 2015 : R201300 | GENERAL REQUIREMENTS FOR SEISMIC DESIGN AND QUALIFICATION OF CANDU NUCLEAR POWER PLANTS |
IEEE 7-4.3.2-2016 | IEEE Standard Criteria for Programmable Digital Devices in Safety Systems of Nuclear Power Generating Stations |
BS EN 60780-323:2017 | Nuclear facilities. Electrical equipment important to safety. Qualification |
ANS 56.3 : 77(R1987) | OVERPRESSURE PROTECTION OF LOW-PRESSURE SYSTEMS CONNECTED TO THE REACTOR COOLANT PRESSURE BOUNDARY |
PD IEC/TR 63084:2017 | Nuclear power plants. Instrumentation and control important to safety. Platform qualification for systems important to safety |
N289.4-12 (R2017) | Testing procedures for seismic qualification of nuclear power plant structures, systems, and components |
IEEE 279-1971 | IEEE Standard: Criteria for Protection Systems for Nuclear Power Generating Stations |
IEC/IEEE 60780-323:2016 | Nuclear facilities - Electrical equipment important to safety - Qualification |
IEEE 323-2003 | IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations |
I.S. EN 60780-323:2017 | NUCLEAR FACILITIES - ELECTRICAL EQUIPMENT IMPORTANT TO SAFETY - QUALIFICATION |
IEEE DRAFT 572 : D4 2006 | QUALIFICATION OF CLASS 1E CONNECTION ASSEMBLIES FOR NUCLEAR POWER GENERATING STATIONS |
ISA 67.01.01 : 2002 | TRANSDUCER AND TRANSMITTER INSTALLATION FOR NUCLEAR SAFETY APPLICATIONS |
IEEE DRAFT 693 : D9 2004 | SEISMIC DESIGN OF SUBSTATIONS |
IEEE 628-2011 | IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations |
IEC TR 63084:2017 | Nuclear power plants - Instrumentation and control important to safety - Platform qualification for systems important to safety |
IEEE C37.82-1987 | IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations |
BS IEC 63147:2017 | Criteria for accident monitoring instrumentation for nuclear power generating stations |
EN 60780-323 : 2017 | Nuclear facilities - Electrical equipment important to safety - Qualification |
IEEE 627-2010 | IEEE Standard for Qualification of Equipment Used in Nuclear Facilities |
ANS 51.1 : 83(R1988) | NUCLEAR SAFETY CRITERIA FOR THE DESIGN OF STATIONARY PRESSURIZED WATER REACTOR PLANTS |
IEEE 649-2006 | IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations |
ANSI N13.4 : 71(R1983) | PORTABLE X-OR GAMMA RADIATION SURVEY INSTRUMENTS, SPECIFICATION OF, |
IEEE 420-2013 REDLINE | IEEE Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations |
IEEE C37.98-2013 | IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities |
IEEE 317-2013 REDLINE | IEEE Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations |
ISA 67.01 : 1994 | TRANSDUCER AND TRANSMITTER INSTALLATION FOR NUCLEAR SAFETY APPLICATIONS |
ANS 52.1 : 83(R1988) | NUCLEAR SAFETY CRITERIA FOR THE DESIGN OF STATIONARY BOILING WATER REACTOR PLANTS |
ASCE/SEI 25 16 : 2016 | EARTHQUAKE-ACTUATED AUTOMATIC GAS SHUTOFF DEVICES |
IEEE 1682-2011 | IEEE Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations |
IEEE C37.20.3-2013 REDLINE | IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
IEEE 2420-2019 | IEEE Standard Criteria for Combustion Turbine-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations |
IEEE 1682-2023 | IEEE Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Safety Systems in Nuclear Power Generating Stations |
IEEE 946-2020 | IEEE Recommended Practice for the Design of DC Power Systems for Stationary Applications |
IEEE 382-2019 REDLINE | IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities |
IEEE 572-2019 | IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations and Other Nuclear Facilities |
IEEE 650-2017 | IEEE Standard for Qualification of Class 1E Static Battery Chargers, Inverters, and Uninterruptible Power Supply Systems for Nuclear Power Generating Stations |
IEEE C37.82-2017 | IEEE Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations |
IEEE 382-2006 | IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations |
ASCE 4 98 : 2000 | SEISMIC ANALYSIS OF SAFETY-RELATED NUCLEAR STRUCTURES AND COMMENTARY |
MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
IEEE 323-2003 | IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.