IEEE 484-2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
07-20-2020
English
02-12-2003
1 Overview
1.1 Scope
1.2 Purpose
2 References
3 Definitions
4 Safety
4.1 Protective equipment
4.2 Precautions
5 Installation design criteria
5.1 Location
5.2 Mounting
5.3 Seismic
5.4 Ventilation
5.5 Instrumentation and alarms
6 Installation procedures
6.1 Receiving and storage
6.2 Assembly
6.3 Freshening charge, data collection, and testing
6.4 Connection to dc system
7 Records
Annex A (informative) - Example methods for performing
connection resistance measurements
Annex B (informative) - Cell/unit internal ohmic measurements
Annex C (informative) - Bibliography
Describes storage, location, mounting, instrumentation, ventilation, pre-assembly, assembly, and charging of large lead storage batteries. Includes safety practice. Applies to installations at generating stations, including nuclear, and large substations.
Committee |
Energy Storage & Stationary Battery Committee
|
DevelopmentNote |
Supersedes IEEE DRAFT 484. (01/2003)
|
DocumentType |
Standard
|
Pages |
24
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
IEEE 308-2012 REDLINE | IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations |
IEEE 13161 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
IEEE 693-2005 | IEEE Recommended Practice for Seismic Design of Substations |
IEEE 1578-2007 | IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management |
NFPA 804 : 2015 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
NFPA 805 : 2015 | PERFORMANCE-BASED STANDARD FOR FIRE PROTECTION FOR LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
NFPA 851 : 2010 | FIRE PROTECTION FOR HYDROELECTRIC GENERATING PLANTS |
NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
IEEE DRAFT 1147 : D8 2005 | GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
UFC 3-520-05 : Change 1 | UNIFIED FACILITIES CRITERIA - STATIONARY BATTERY AREAS |
UFC 3-520-01 : 2015 | UNIFIED FACILITIES CRITERIA - INTERIOR ELECTRICAL SYSTEMS |
TM 5-811-1 : V19950228 | ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION |
IEEE 1561-2007 | IEEE Guide for Optimizing the Performance and Life of Lead-Acid Batteries in Remote Hybrid Power Systems |
UFC 3-560-01 : Change 1 | UNIFIED FACILITIES CRITERIA (UFC) - OPERATION AND MAINTENANCE: ELECTRICAL SAFETY |
API 554-2 : 2008 | PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN |
IEEE 1660-2008 | IEEE Guide for Application and Management of Stationary Batteries Used in Cycling Service |
C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
IEEE 1661-2007 | IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems |
IEEE 1657-2009 | IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries |
C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
IEEE 387-1995 | IEEE Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations |
IEEE 535-2013 | IEEE Standard for Qualification of Class 1E Vented Lead Acid Storage Batteries for Nuclear Power Generating Stations |
IEEE 946-2004 | IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Systems |
IEEE/ANSI N42.4-1971 | American National Standard for High Voltage Connectors for Nuclear Instruments |
IEEE 1491-2012 REDLINE | IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
IEEE DRAFT 1184 : D21 2006 | GUIDE FOR BATTERIES FOR UNINTERRUPTIBLE POWER SUPPLY SYSTEMS |
IEEE 1818-2017 | IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations |
NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
IEEE 3001.2-2017 | IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems |
CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
IEEE 3007.2 : 2010 | This recommended practice covers the maintenance of industrial and commercial power systems. |
C22.10-10 | Québec Construction Code, Chapter V - Electricity Canadian Electrical Code, Part I (Twenty-first Edition) with Québec Amendments |
IEEE 279-1971 | IEEE Standard: Criteria for Protection Systems for Nuclear Power Generating Stations |
API 554-2 : 2008 : R2016 | PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN |
IEEE 2030.3-2016 | IEEE Standard Test Procedures for Electric Energy Storage Equipment and Systems for Electric Power Systems Applications |
IEEE 1184-2006 | IEEE Guide for Batteries for Uninterruptible Power Supply Systems |
IEEE 979-2012 | IEEE Guide for Substation Fire Protection |
IEEE DRAFT 1562 : D8 2006 | ARRAY AND BATTERY SIZING IN STAND-ALONE PHOTOVOLTAIC SYSTEMS |
IEEE DRAFT 693 : D9 2004 | SEISMIC DESIGN OF SUBSTATIONS |
API 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
IEEE 1147-2005 | IEEE Guide for the Rehabilitation of Hydroelectric Power Plants |
IEEE 1361-2014 | IEEE Guide for Selecting, Charging, Testing, and Evaluating Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems |
ANSI N13.4 : 71(R1983) | PORTABLE X-OR GAMMA RADIATION SURVEY INSTRUMENTS, SPECIFICATION OF, |
IEEE 937-2007 REDLINE | IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems |
IEEE 450-2010 REDLINE | IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications |
IEEE 485-2010 | IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications |
IEEE DRAFT 1188 : D9 2005 | RECOMMENDED PRACTICE FOR MAINTENANCE, TESTING AND REPLACEMENT OF VALVE REGULATED LEAD ACID BATTERIES FOR STATIONARY APPLICATIONS |
API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
NFPA 804 : 2020 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
C22.1-18 | Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations |
IEEE 535-2006 | IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations |
IEEE C57.127-2007 | IEEE Guide for the Detection and Location of Acoustic Emissions from Partial Discharges in Oil-Immersed Power Transformers and Reactors |
IEEE 1491-2005 | IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications |
IEEE 1578-2018 REDLINE | IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management |
IEEE 450-2010 REDLINE | IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications |
IEEE 485-2010 | IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.