IEEE/ASTM SI_10-2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
10-15-2021
English
04-11-2011
Committee |
Quantities, Units, and Symbols Standards Comm
|
DocumentType |
Standard
|
Pages |
78
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ASTM E 1847 : 1996 : R2013 | Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines (Withdrawn 2022) |
ISO 13837:2008 | Road vehicles Safety glazing materials Method for the determination of solar transmittance |
MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
ACI 211.3R : 2002 | GUIDE FOR SELECTING PROPORTIONS FOR NO-SLUMP CONCRETE |
ASTM E 1163 : 2010 : R2016 | Standard Test Method for Estimating Acute Oral Toxicity in Rats |
FM 1020 : 2007 | AUTOMATIC WATER CONTROL VALVES |
FM 1610 : 2016 | DUCTILE IRON PIPE AND FITTINGS, FLEXIBLE FITTINGS AND COUPLINGS |
ASTM D 7478/D7478M : 2011 | Standard Specification for Heavy Duty Sheathed Wood Crates |
ASTM D 1914 : 1995 : R2014 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
A-A-52417 Revision A:2009 | BATTERY, STORAGE: ALKALINE, NICKEL-CADMIUM |
ASTM D 7471 : 2009 : R2014 | Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
FM 7730 : 2014 | EXPLOSION VENTING DEVICES |
ASTM E 1562 : 2000 : R2013 | Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids |
FM 1637 : 2010 | FLEXIBLE SPRINKLER HOSE WITH THREADED END FITTINGS |
ASTM D 5576 : 2000 : R2006 | Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) |
FM 2510 : 2014 | FLOOD ABATEMENT EQUIPMENT |
FM 2000 : 2018 | AUTOMATIC SPRINKLERS FOR FIRE PROTECTION |
MIL-HDBK-1908 Revision B:1999 | Definitions of Human Factors Terms |
MIL-STD-38784 Revision A:2011 | GENERAL STYLE AND FORMAT REQUIREMENTS FOR TECHNICAL MANUALS |
ISO 12108:2012 | Metallic materials Fatigue testing Fatigue crack growth method |
ASTM F 2146 : 2013 : REDLINE | Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320) |
ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM E 2067 : 2015 : REDLINE | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
ASTM F 1951 : 2014 : REDLINE | Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment |
ASTM D 4603 : 2003 : R2011 : EDT 1 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
CSA NGV1 : 2017 | COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
ISA 77.44.02 : 2001 | FOSSIL FUEL POWER PLANT STEAM TEMPERATURE CONTROL SYSTEM - ONCE-THROUGH TYPE |
ASTM D 5757 : 2011 : R2017 | Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets |
ASTM D 6338 : 2017 : REDLINE | Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
ASTM D 5502 : 2000 : R2010 | Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
IEEE 1541 : 2002 | STANDARD FOR PREFIXES FOR BINARY MULTIPLES |
ASTM F 2384 : 2010 : R2016 | Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) |
NFPA 25 : 2017 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS |
FM 2021,25 : 2010 | AUTOMATIC AND OPEN WATER-SPRAY NOZZLES FOR INSTALLATION IN PERMANENTLY PIPED SYSTEMS |
CSA 4.6 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
ANSI Z83.4-2017/CSA 3.7-2017 | Non-recirculating direct gas-fired heating and forced ventilation appliances for commercial and industrial application |
ANSI Z21.87 : 2007 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
ANSI Z21.86-2016/CSA 2.32-2016 | VENTED GAS-FIRED SPACE HEATING APPLIANCES |
ANSI Z83.25-2017 (R2021)/CSA 3.19-2017 | Direct gas-fired process air heaters |
ANSI Z21.75 : 2016 | CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES |
ASTM C 452 : 2015 : REDLINE | TEST METHOD FOR POTENTIAL EXPANSION OF PORTLAND-CEMENT MORTARS EXPOSED TO SULFATE |
ANSI Z21.86-2016/CSA 2.32-2016 | Vented gas-fired space heating appliances |
NFPA T3.19.18 : 2009 | FLUID POWER - SEALING DEVICES - GROOVE DIMENSIONS FOR RADIAL COMPRESSION TYPE PISTON RINGS |
ASTM D 1990 : 2016 : REDLINE | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
ANSI FC 1 : 2012 | STATIONARY FUEL CELL POWER SYSTEMS |
AASHTO T 98M/T 98 : 2012(R2016) | METHOD OF TEST FOR FINENESS OF PORTLAND CEMENT BY THE TURBIDIMETER |
ASTM D 698 : 2013-05 | TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3])) |
ASTM C 1419 : 2014 : REDLINE | Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus |
ASTM D 4322 : 1996 | Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography |
ANSI/CSA HGV 4.8-2012 (R2018) | Hydrogen gas vehicle fueling station compressor guidelines |
NSF 12 : 2017 | AUTOMATIC ICE MAKING EQUIPMENT |
CSA HPIT 2-2017 | Dispensing systems and components for fueling hydrogen powered industrial trucks |
API MPM CH15 : 2001(R2015) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 15: GUIDELINES FOR THE USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI) IN THE PETROLEUM AND ALLIED INDUSTRIES |
FM 5420 : 2007 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
ASTM E 1367 : 2003 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
CSA LNG 2-2017 | LIQUEFIED NATURAL GAS VEHICLE FUEL CONTAINERS |
ASTM E 1706 : 2005 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM E 1415 : 1991 : R2004 | Standard Guide for Conducting Static Toxicity Tests With <i>Lemna gibba</i><b> G3</b> |
ASTM D 7301 : 2011 : R2015 | Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose |
ASTM F 1058 : 2016 : REDLINE | Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008) |
ASTM D 5594 : 1998 : R2004 | Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
NFPA 25 HANDBOOK : 2011 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS HANDBOOK |
FM 1313 : 2018 | POSITIVE DISPLACEMENT FIRE PUMPS (ROTARY GEAR TYPE) |
ASTM F 2181 : 2014 : REDLINE | Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
ASTM D 6288 : 2017 : REDLINE | Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing |
ANSI Z21.18 : 2007 : INC : ADD B : 2012 : R2017 | GAS APPLIANCE PRESSURE REGULATORS |
ASTM D 5149 : 2002 : R2008 | Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
IEEE 1505.1-2008 | IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505 |
ASTM E 1338 : 2009 : R2015 | Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases |
ASTM C 786/C786M : 2017 : REDLINE | Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods |
ASTM D 6436 : 2014 : REDLINE | Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers |
ASTM D 1739 : 1998 : R2017 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
ASTM E 857 : 2005 : EDT 1 | Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species |
ASTM E 1434 : 2000 | Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 6042 : 2009 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
ASTM E 1193 : 1997 : R2012 | <i xmlns:a="http://library.astm.org" xmlns="">Daphnia magna</i> |
ASTM D 1996 : 1997 : R2003 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) (Withdrawn 2009) |
ASTM E 1022 : 1994 : R2013 | Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks (Withdrawn 2022) |
ASTM D 4969 : 2017 : REDLINE | Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric |
ASTM D 3631 : 1999 : R2007 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
ASTM D 4603 : 2003 | Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
ASTM F 90 : 2014 : REDLINE | Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605) |
ASTM F 1314 : 2018 : REDLINE | Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
ASTM D 3594 : 1993 : R2000 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
IEEE 1584-2002 | IEEE Guide for Performing Arc Flash Hazard Calculations |
ASTM C 1479M : 2016 : REDLINE | Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric) |
ASTM D 5156 : 2002 : R2008 | Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption) |
ASTM E 2122 : 2002 | Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves |
ASTM F 2838 : 2017 : REDLINE | Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation |
ASTM E 1295 : 2001 | Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with <i>Ceriodaphnia dubia</i> |
ASTM D 5168 : 2012 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
ASTM C 1360 : 2017 : REDLINE | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
ASTM D 7776 : 2012 | Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories (Withdrawn 2017) |
ASTM E 1953 : 2014 : REDLINE | Standard Practice for Description of Thermal Analysis and Rheology Apparatus |
ASTM D 3275 : 2008 | Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
ASTM D 6585 : 2017 : REDLINE | Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
ASTM D 3368 : 2017 : REDLINE | Standard Specification for FEP Sheet and Film |
ASTM E 1537 : 2016 : REDLINE | Standard Test Method for Fire Testing of Upholstered Furniture |
ASTM D 8114 : 2017 | Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition |
ASTM C 1533 : 2015 : REDLINE | Standard Guide for General Design Considerations for Hot Cell Equipment |
ASTM E 1688:2010 | Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates |
ASTM D 2260 : 2003 : R2013 | Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems |
ASTM F 799 : 2011 : REDLINE | SPECIFICATION FOR COBALT-28CHROMIUM-6MOLYBDENUM ALLOY FORGINGS FOR SURGICAL IMPLANTS (UNS R31537, R31538, R31539) |
ASTM D 7472 : 2009 | Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
ASTM D 3094 : 2000 : R2010 | Standard Test Method for Seepage Rate of Aerosol Products |
ASTM D 5815 : 1995 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC) |
ASTM E 1367 : 2003 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM E 729 : 1996 : R2002 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
ASTM E 1391 : 2003 : R2014 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates |
ASTM D 1557 : 2012 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
ASTM D 3124 : 1998 : R2011 | Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
ASTM E 2455 : 2006 | Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels |
ASTM C 1525 : 2004 : R2009 | Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching |
ASTM E 1525 : 2002 | Standard Guide for Designing Biological Tests with Sediments |
ASTM E 2230 : 2013 : REDLINE | Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material |
ASTM F 1332 : 1999 | Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F-25 Supplement to IEEE/ASTM SI 10) |
ASTM D 6568 : 2000 : R2006 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
ASTM C 1465 : 2008 : R2013 : EDT 1 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
ASTM C 1366 : 2004 : R2009 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
ASTM D 5527 : 2000 : R2011 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
ASTM D 5527 : 2000 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
ASTM F 620 : 2011 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
ASTM D 3465 : 2014 : REDLINE | Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography |
ASTM F 1332 : 1999 : R2011 | Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10) (Withdrawn 2017) |
ASTM C 1361 : 2010 : R2015 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures |
ASTM D 6011 : 1996 : R2008 | Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer |
ASTM E 1399/E1399M : 1997 : R2013 : EDT 1 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
ASTM C 186 : 2017 : REDLINE | Standard Test Method for Heat of Hydration of Hydraulic Cement |
ASTM E 857 : 2005 | Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species |
ASTM D 7471 : 2009 | Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
ASTM D 5485 : 2016 : REDLINE | Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter |
ASTM D 5594 : 1998 | Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
ASTM E 1415 : 1991 : R1998 | Standard Guide for Conducting Static Toxicity Tests With Lemna gibba G3 |
ASTM F 2779 : 2010 : R2016 | Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface |
ASTM C 1565 : 2017 : REDLINE | Standard Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements |
ASTM D 5477 : 2011 | Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) |
ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
ASTM D 1996 : 1997 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) |
ASTM E 772 : 2015 : REDLINE | Standard Terminology of Solar Energy Conversion |
ASTM D 5527 : 2000 : R2017 : EDT 1 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
ASTM E 1022 : 1994 | Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks |
ASTM C 1465 : 2008 : R2013 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
ASTM F 221 : 1998 : R2003 | Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom |
NFPA 804 : 2015 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
NFPA 12A : 2018 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
MH1 : 2005 | PALLET, SLIP SHEETS, & OTHER BASES FOR UNIT LOADS |
NFPA 1192 : 2018 | RECREATIONAL VEHICLES |
NFPA 17A : 2017 | WET CHEMICAL EXTINGUISHING SYSTEMS |
ASTM E 2231 : 2018 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
NFPA 851 : 2010 | FIRE PROTECTION FOR HYDROELECTRIC GENERATING PLANTS |
NFPA 502 : 2017 | ROAD TUNNELS, BRIDGES, AND OTHER LIMITED ACCESS HIGHWAYS |
NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
NFPA 2001 : 2018 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
CSA 6.25 : 2005 : INC : ADD A : 2007 : R2010 | CYLINDER CONNECTION DEVICES |
CSA 2.33 : 2017 | VENTED GAS FIREPLACE HEATERS |
ASME B89.1.7 : 2009 : R2014 | PERFORMANCE STANDARD FOR STEEL MEASURING TAPES |
ASME RT 1 : 2009 | SAFETY STANDARD FOR STRUCTURAL REQUIREMENTS FOR LIGHT RAIL VEHICLES |
SD 10 : 20031201 | GUIDE FOR IDENTIFICATION AND DEVELOPMENT OF METRIC STANDARDS |
ASME B89.1.7 : 2009 | PERFORMANCE STANDARD FOR STEEL MEASURING TAPES |
A-A-52432 Revision B:2011 | MIRROR ASSEMBLY, REARVIEW: AUTOMOTIVE EXTERIOR MOUNTING |
CSA HGV 4.9 : 2016 | HYDROGEN FUELING STATIONS |
ASTM D 3594 : 1993 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
FM 1950 : 2016 | SEISMIC SWAY BRACES FOR PIPE, TUBING AND CONDUIT |
NSF 21 : 2015 | THERMOPLASTIC REFUSE CONTAINERS |
ASTM E 1706 : 2005 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM D 7472 : 2009 : R2014 | Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
FM 5560 : 2017 | WATER MIST SYSTEMS |
ASTM E 1706 : 2005 : R2010 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates (Withdrawn 2019) |
BS IEC 63004:2015 | Standard for receiver fixture interface |
ASTM D 3222 : 2005 : R2015 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
17/30293100 DC : 0 | BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
ASTM D 3675 : 2017 : REDLINE | TEST METHOD FOR SURFACE FLAMMABILITY OF FLEXIBLE CELLULAR MATERIALS USING A RADIANT HEAT ENERGY SOURCE |
AASHTO M 203M/M 203 : 2012 | SPECIFICATION FOR STEEL STRAND, UNCOATED SEVEN-WIRE FOR CONCRETE REINFORCEMENT |
ASTM C 1465 : 2008 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures |
A-A-59797 Revision A:2009 | HAND WASH STATION, FIELD |
FM 1421 : 2007 | MONITOR ASSEMBLY |
ANSI Z21.77 : 2005 : R2015 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
ASTM D 6867 : 2003 | Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing |
ASTM C 1421 : 2018 : REDLINE | Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature |
ASTM D 6026 : 2013 : REDLINE | Standard Practice for Using Significant Digits in Geotechnical Data |
ASTM E 1415 : 1991 : R2004 : EDT 1 | Standard Guide for Conducting Static Toxicity Tests With <i>Lemna gibba</i> G3 |
ASTM C 909 : 1993 : R2000 | Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes |
ASTM D 5502 : 2000 | Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
CSA 4.4 : 2015 | RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
ASTM D 6275 : 1998 | Standard Practice for Laboratory Testing of Bridge Decks |
ASTM C 861 : 1993 : R2000 | Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes |
ASTM F 560 : 2017 : REDLINE | Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) |
A-A-52193 Revision G:2015 | FOOD CONTAINER, INSULATED, WITH INSERTS |
ACI 126.3R : 1999 | GUIDE TO RECOMMENDED FORMAT FOR CONCRETE IN MATERIALS PROPERTY DATABASE |
FM 1614 : 2017 | FIBER REINFORCED COMPOSITE (FRC) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE |
A-A-55762 Revision A:2011 | RUBBER, SILICONE; STRIP, SHAPE 18 |
ASTM E 1366 : 2011 | Standard Practice for Standardized Aquatic Microcosms: Fresh Water |
MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
CSA 6.23 : 2005 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
ANSI Z83.20 : 2016 | GAS-FIRED TUBULAR AND LOW-INTENSITY INFRARED HEATERS |
ANSI Z83.25 : 2017 | DIRECT GAS-FIRED PROCESS AIR HEATERS |
MIL-STD-967 Base Document:2003 | DEFENSE HANDBOOKS FORMAT AND CONTENT |
NFPA 291 : 2016 | FIRE FLOW TESTING AND MARKING OF HYDRANTS |
ASTM E 1023 : 1984 : R1996 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
FM 4999 : 2007 | SPRAY FIRE SHIELDS |
ASTM D 6330 : 1998 : R2014 | Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
CSA 1.8 : 2016 | GAS FOOD SERVICE EQUIPMENT |
IEEE C57.144 : 2004 | GUIDE FOR METRIC CONVERSION OF TRANSFORMER STANDARDS |
ASTM E 1562 : 2000 | Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids |
NFPA 12 : 2018 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
ANSI Z21.80 : 2011 : INC : ADD A : 2012 : R2016 | LINE PRESSURE REGULATORS |
CSA 6.10 : 2015 | CONNECTORS FOR GAS APPLIANCES |
CSA 4.6 : 2007 : INC : ADD A : 2010 : R2016 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
CSA 4.9 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
ASTM D 4826 : 1988 : R2002 | Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard |
CSA 6.16 : 2015 | CONNECTORS FOR MOVEABLE GAS APPLIANCES |
ANSI Z21.80 : 2011 : INC : ADD A : 2012 | LINE PRESSURE REGULATORS |
ASTM E 1733 : 1995 | Standard Guide for Use of Lighting in Laboratory Testing |
ANSI Z21.13 : 2017 | GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS |
ANSI Z21.15 : 2009 : INC : ADD A : 2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
ASTM F 2384 : 2010 | Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901) |
ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2012 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
ANSI Z21.81 : 2005 : INC : ADD A : 2007 : R2010 | CYLINDER CONNECTION DEVICES |
ASTM D 2238 : 1992 : R1999 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm |
ANSI Z21.97-2017/CSA 2.41-2017 | Outdoor decorative gas appliances |
ASTM C 778 : 2017 : REDLINE | Standard Specification for Standard Sand |
FM 1112 : 2006 | INDICATING VALVES (BUTTERFLY OR BALL TYPE) |
FM 1312 : 2018 | CENTRIFUGAL FIRE PUMPS (VERTICAL-SHAFT, TURBINE TYPE) |
FM 1615 : 2009 | CAST IRON PIPE, FITTINGS AND COUPLINGS |
AASHTO T 137 : 2012(R2016) | METHOD OF TEST FOR AIR CONTENT OF HYDRAULIC CEMENT MORTAR |
NSF 52 : 2017 | SUPPLEMENTAL FLOORING |
ASTM D 6011 : 1996 : R2015 | Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer |
ASTM E 1163 : 2010 | Standard Test Method for Estimating Acute Oral Toxicity in Rats |
FM 2030 : 2009 | RESIDENTIAL AUTOMATIC SPRINKLERS FOR FIRE PROTECTION |
ASTM C 1326 : 2013 : R2018 | Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics |
ASCE/CI 36 15 : 2015 | STANDARD DESIGN AND CONSTRUCTION GUIDELINES FOR MICROTUNNELING |
ISA 77.42.01 : 1999 : R2006 | FOSSIL FUEL POWER PLANT FEEDWATER CONTROL SYSTEM - DRUM TYPE |
CSA 2.22 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
IEC 63004:2015 | Standard for receiver fixture interface |
ANSI Z21.18 : 2007 : INC : ADD B : 2012 | GAS APPLIANCE PRESSURE REGULATORS |
FM 1230 : 2013 | ANTI-WATER HAMMER CHECK VALVES |
ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
FM 5320 : 2013 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
ANSI NGV3.1 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
ASTM F 1251 : 1989 : R1995 | Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices |
ASTM D 420 : 2018 | Standard Guide for Site Characterization for Engineering Design and Construction Purposes |
ASTM E 1366 : 2011 : R2016 | Standard Practice for Standardized Aquatic Microcosms: Fresh Water |
ASTM C 1624 : 2005 : R2015 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
ASTM C 1157/C1157M : 2017 : REDLINE | Standard Performance Specification for Hydraulic Cement |
NSF 14159-3 : 2010 | HYGIENE REQUIREMENTS FOR THE DESIGN OF MECHANICAL BELT CONVEYORS USED IN MEAT AND POULTRY PROCESSING EQUIPMENT |
ASTM E 1391 : 2003 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates |
ASTM C 769 : 2015 : REDLINE | Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus |
ASTM D 7083 : 2016 : REDLINE | Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography |
(INACTIVE RECORD)ASTM D 5336 : 2015-04 | CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS |
ASTM E 1309 : 2000 | Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases |
ASTM D 5149 : 2002 | Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
FM 6320 : 2018 | COMBUSTIBLE GAS DETECTORS |
ASTM C 91 : 2005 | Standard Specification for Masonry Cement |
ASTM E 1594 : 2016 : REDLINE | Standard Guide for Expression of Temperature |
ASTM C 1329 : 2005 | Standard Specification for Mortar Cement |
ASTM F 1586 : 2013 : EDT 1 | Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) |
ASTM D 6414 : 2014 : REDLINE | Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption |
ASTM C 1469 : 2010 : R2015 | Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature |
ASTM D 5149 : 2002 : R2016 | Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
ASTM F 2869 : 2010 : R2016 | Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface |
ASTM F 1108 : 2014 : REDLINE | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
ASTM C 928 : 2005 | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
ASTM D 3594 : 1993 : R2006 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers |
ASTM F 620 : 2011 : R2015 | Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition |
ASTM E 337 : 2015 : REDLINE | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
ASTM D 5575 : 2007 : R2013 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
ASTM F 3273 : 2017 | Standard Specification for Wrought Molybdenum-47.5 Rhenium Alloy for Surgical Implants (UNS R03700) |
ASTM D 6718 : 2002 | Standard Practice for Writing Committee D 13 Standards (Withdrawn 2011) |
ASTM D 5085 : 2002 : R2008 | Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
ASTM E 1611 : 2000 : R2013 | Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids |
ASTM D 3631 : 1999 : R2017 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
ASTM D 3222 : 2005 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
ASTM E 1295 : 2001 : R2006 | Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with <i> Ceriodaphnia dubia</i> |
ASTM D 5574 : 1994 : R1999 : EDT 1 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
ASTM D 3275 : 2008 : R2013 | Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
ASTM D 4441 : 2015 : REDLINE | Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
ASTM D 6867 : 2003 : R2014 | Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing |
ASTM D 7779 : 2011 | Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature |
ASTM C 183/C183M : 2016 : REDLINE | Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
ASTM C 1862 : 2017 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
ASTM D 5017 : 2017 : REDLINE | Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance |
ASTM D 7478/D7478M : 2011 : R2017 | Standard Specification for Heavy Duty Sheathed Wood Crates |
ASTM D 4001 : 2013 : REDLINE | Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering |
ASTM E 1023 : 1984 : R2014 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
ASTM D 2260 : 2003 | Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems |
ASTM C 1615/C1615M : 2017 : REDLINE | Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities |
ASTM D 5574 : 1994 : R2012 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
ASTM F 480 : 2014 : REDLINE | Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
ASTM E 1367 : 2003 : R2008 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM D 6457 : 2008 : R2013 | Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) (Withdrawn 2018) |
ASTM C 1328 : 2005 | Standard Specification for Plastic (Stucco) Cement |
ASTM D 7219 : 2008 : R2014 | Standard Specification for Isotropic and Near-isotropic Nuclear Graphites |
ASTM D 2238 : 1992 : R2004 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm |
ASTM E 1338 : 2009 | Guide for Identification of Metals and Alloys in Computerized Material Property Databases |
ASTM D 6255/D6255M : 2005 : R2011 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
ASTM C 10/C10M : 2014 : REDLINE | Standard Specification for Natural Cement |
ASTM E 1415 : 1991 : R2012 | Standard Guide for Conducting Static Toxicity Tests With <i>Lemna gibba</i> G3 (Withdrawn 2021) |
ASTM D 3159 : 2015 : REDLINE | Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
ASTM F 2989 : 2013 : REDLINE | Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications |
ASTM C 1107 : 2007 | SPECIFICATION FOR PACKAGED DRY, HYDRAULIC-CEMENT GROUT (NONSHRINK) |
ASTM E 1525 : 2002 : R2008 | Standard Guide for Designing Biological Tests with Sediments |
ASTM F 2229 : 2012 : REDLINE | Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) |
ASTM E 2102 : 2017 : REDLINE | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
ASTM E 2122 : 2002 : R2013 | Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves (Withdrawn 2022) |
ASTM C 1469 : 2010 | Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature |
NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
MH1 : 2016 | PALLET, SLIP SHEETS, & OTHER BASES FOR UNIT LOADS |
NFPA 1962 : 2018 | CARE, USE, INSPECTION, SERVICE TESTING, AND REPLACEMENT OF FIRE HOSE, COUPLINGS, NOZZLES, AND FIRE HOSE APPLIANCES |
NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
IEC 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
CSA HPIT 1 : 2015 | COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS |
CSA HPIT 1:15 (R2020) | Compressed hydrogen powered industrial truck on-board fuel storage and handling components |
CSA 2.6 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
NSF 169 : 2016 | SPECIAL PURPOSE FOOD EQUIPMENT AND DEVICES |
NFPA 230 : 2003 | FIRE PROTECTION OF STORAGE |
ANSI Z83.11 : 2016 | GAS FOOD SERVICE EQUIPMENT |
CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
CSA 6.27 : 2016 | CONNECTORS FOR OUTDOOR GAS APPLIANCES AND MANUFACTURED HOMES |
ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
AASHTO M 280 : 2014 | SPECIFICATION FOR METALLIC-COATED (CARBON) STEEL BARBED WIRE |
ANSI/NEMA C29.2B:2013 | American National Standard for Insulators-Wet Process Porcelain and Toughened Glass—Transmission Suspension Type |
NEMA C29.2A : 2013 | WET PROCESS PORCELAIN AND TOUGHENED GLASS - DISTRIBUTION SUSPENSION TYPE |
ASME Y14.5 : 2009 | DIMENSIONING AND TOLERANCING |
ASTM C 909 : 1993 : R2010 | Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes |
NSF 24 : 2015 | PLUMBING SYSTEM COMPONENTS FOR RECREATIONAL VEHICLES |
AASHTO T 106M/T 106 : 1900 | METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR (USING 50-MM OR 2-IN. CUBE SPECIMENS) |
ANSI NGV1 : 2017 | COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES |
FM 5970 : 2015 | HEAVY DUTY MOBILE EQUIPMENT PROTECTION SYSTEMS |
AOP 20 : 2017 | SAFETY, ARMING AND FUNCTIONING SYSTEMS MANUAL OF TESTS |
API MPM CH9.4 : 2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 9.4 - CONTINUOUS DENSITY MEASUREMENT UNDER DYNAMIC (FLOWING) CONDITIONS |
ASTM D 4361 : 2010 : REDLINE | TEST METHOD FOR DETERMINING LOGARITHMIC VISCOSITY NUMBER OF POLY (VINYL CHLORIDE) (PVC) IN FORMULATED COMPOUNDS |
ASTM C 1624 : 2005 : R2010 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
NSF 18:2016 | MANUAL FOOD AND BEVERAGE DISPENSING EQUIPMENT |
ASTM E 1193 : 1997 : R2004 | Standard Guide for Conducting <I>Daphnia magna</I> Life-Cycle Toxicity Tests |
FM 2008 : 2018 | QUICK RESPONSE STORAGE SPRINKLERS FOR FIRE PROTECTION |
A-A-59793 Revision A:2007 | PANS, STAINLESS STEEL, WITH NO-STICK COATED FINISH |
BS IEC 63003:2015 | Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505<sup>TM</sup> |
ASTM E 1023 : 1984 : R2007 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
CSA 6.9 : 2014 | QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES |
BS EN 60469:2013 | Transitions, pulses and related waveforms. Terms, definitions and algorithms |
UFC 1-300-02 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - UNIFIED FACILITIES GUIDE SPECIFICATIONS (UFGS) FORMAT STANDARD |
ASTM D 7399 : 2008 | Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR) (Withdrawn 2017) |
FM 1035 : 2014 | NITROGEN GENERATORS |
ASTM F 2527 : 2016 : REDLINE | Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537) |
A-A-52412 Revision A:2011 | INCLINOMETER, BALL STYLE |
BS IEC 62529:2012 | IEEE standard for signal and test definition |
ASTM D 4322 : 1996 : R2001 : EDT 1 | Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography (Withdrawn 2010) |
ANSI Z21.18 : 2007 : R2012 | GAS APPLIANCE PRESSURE REGULATORS |
ASTM E 1023 : 1984 : R2002 | Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses |
ASTM D 5015 : 2015 : REDLINE | Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
FM 5580 : 2012 | HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS |
ASTM C 158 : 2002 : R2017 | Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture) |
NFPA 410 : 2015 | AIRCRAFT MAINTENANCE |
ASTM E 729 : 1996 : R2007 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
ASTM D 6894 : 2013 : REDLINE | Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine |
ASTM D 5576:2000 | Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectroscopy (FT-IR) |
CSA 6.3 : 2007 | GAS APPLIANCES PRESSURE REGULATORS |
A-A-52465 Revision B:2016 | PRIMER COATING, SYNTHETIC, VOC COMPLIANT (FOR BRAKE DRUMS) |
ASTM C 559 : 2016 : REDLINE | Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles |
I.S. EN 60469:2013 | TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS (IEC 60469:2013 (EQV)) |
ASTM E 857 : 2005 : R2012 | Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species |
SAE AS 5716 : 2012 | STANDARD ELECTRICAL AND LOGICAL INTERFACE FOR AIRBORNE FUZING SYSTEMS |
ASTM E 1434 : 2000 : R2013 | Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases (Withdrawn 2015) |
ASTM F 496 : 2014-04 | SPECIFICATION FOR IN-SERVICE CARE OF INSULATING GLOVES AND SLEEVES |
CSA 6.8 : 2005 : INC : ADD A : 2010 : R2015 | PILOT GAS FILTERS |
ASTM F 2912 : 2017 : REDLINE | Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings |
A-A-52202 Revision C:2012 | OPENER, CAN, HAND, FOR SQUARE AND ROUND FOOD CANS |
ANSI Z21.54 : 2014 | GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES |
ASTM A 1007 : 2015 : REDLINE | Standard Specification for Carbon Steel Wire for Wire Rope |
ASTM D 3124 : 1998 : R2003 | Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
CSA 2.3 : 2016 | GAS-FIRED CENTRAL FURNACES |
ANSI Z21.87 :2007 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
ASTM D 3016 : 1997 : R2018 | Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships |
ANSI Z21.60-2017/CSA 2.26-2017 | Decorative gas appliances for installation in solid-fuel burning fireplaces |
ASTM D 6568 : 2000 : R2011 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
ANSI Z21.50 : 2016 | VENTED DECORATIVE GAS APPLIANCES |
ASTM C 1337 : 2017 : REDLINE | Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures |
ASTM F 1642/F1642M : 2017 : REDLINE | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
ASTM E 2707 : 2015 : REDLINE | Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure |
ASTM D 245 : 2006 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
ANSI Z21.78 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
FM 1056 : 2010 | SIGHT DRAINS FOR AUTOMATIC SPRINKLER SYSTEMS |
FM 6036 : 2013 | FLEXIBLE HOSE ASSEMBLIES FOR FLAMMABLE GASES AND/OR IGNITABLE LIQUIDS |
ASTM F 139 : 2012 | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) |
ANSI Z21.15 : 2009 : INC : ADD B : 2013 : R2014 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
ANSI Z21.88 : 2017 | VENTED GAS FIREPLACE HEATERS |
ANSI Z83.19-2017/CSA 2.35-2017 | GAS-FIRED HIGH-INTENSITY INFRARED HEATERS |
ASTM D 3016 : 1997 : R2010 | Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships |
CSA 6.31 : 2006 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
CSA 6.31 : 2006 : INC : ADD A : 2007 : R2011 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
NFPA 57 : 2002 | LIQUEFIED NATURAL GAS (LNG) VEHICULAR FUEL SYSTEMS CODE |
CSA/ANSI NGV 5.2-2017 | Vehicle fueling appliances (VFA) |
IEC 62265:2005 | Advanced Library Format (ALF) describing Integrated Circuit (IC) technology, cells and blocks |
ASTM D 3124 : 1998 | Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
NSF 14159-2 : 2014 | HYGIENE REQUIREMENTS FOR THE DESIGN OF HAND HELD TOOLS USED IN MEAT AND POULTRY PROCESSING |
ASTM D 5502 : 2000 : R2005 | Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
ANSI Z21.97 : 2017 | OUTDOOR DECORATIVE GAS APPLIANCES |
CSA B108 : 2014 | COMPRESSED NATURAL GAS FUELLING STATIONS INSTALLATION CODE |
NSF 6 : 2016 | DISPENSING FREEZERS |
ASTM D 5168 : 2012 : R2017 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
ANSI Z21.22 : 2015 | RELIEF VALVES FOR HOT WATER SUPPLY SYSTEMS |
ASTM C 1819 : 2015 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts |
ASTM E 1399 : 1997 : R2009 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
NSF 3 : 2017 | COMMERCIAL WAREWASHING EQUIPMENT |
FM 7400 : SEP 2016 | LIQUID AND GAS SAFETY SHUTOFF VALVES |
NSF 36 : 2012 | |
CSA 6.22 : 2011 : ADD 1 : INC : ADD A : 2012 | LINE PRESSURE REGULATORS |
CSA HGV 4.10 : 2012 | STANDARD FOR FITTINGS FOR COMPRESSED HYDROGEN GAS AND HYDROGEN RICH GAS MIXTURES |
ASTM E 1022 : 1994 : R2002 | Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks |
ANSI HGV 3.1 : 2015 | FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES |
CSA 6.22 : 2011 : INC : ADD A : 2012 : R2016 | LINE PRESSURE REGULATORS |
NSF 170 : 2017 | GLOSSARY OF FOOD EQUIPMENT TERMINOLOGY |
ASTM D 6265 : 2017 : REDLINE | Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test |
NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
CSA O141 : 2005 : R2014 | SOFTWOOD LUMBER |
AASHTO T 127 : 2015 | METHOD OF TEST FOR SAMPLING AND AMOUNT OF TESTING OF HYDRAULIC CEMENT |
ANSI Z21.18 : 2007 : INC : ADD A : 2010 | GAS APPLIANCE PRESSURE REGULATORS |
ASTM D 5204 : 2017 : REDLINE | CLASSIFICATION SYSTEM FOR POLYAMIDE-IMIDE (PAI) MOLDING AND EXTRUSION MATERIALS |
ASTM E 2575 : 2008 | Standard Test Method for Determination of Oxygen in Copper and Copper Alloys (Withdrawn 2017) |
ASTM C 1402 : 2017 : REDLINE | Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples |
ANSI Z21.18 : 2007 | GAS APPLIANCE PRESSURE REGULATORS |
ASTM D 5524 : 1994 : R2001 : EDT 1 | Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography (Withdrawn 2009) |
AASHTO T 27 : 2014 | METHOD OF TEST FOR SIEVE ANALYSIS OF FINE AND COARSE AGGREGATES |
FM 4880 : 2017 | EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS |
ASTM D 4473 : 2008 : R2016 | Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior |
ASTM E 1191 : 2003 : REV A : R2008 | Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids |
ASTM D 6042 : 2009 : R2016 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
ASTM D 6568 : 2000 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
ASTM D 4203 : 2017 : REDLINE | Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
ASTM E 1399 : 1997 : R2005 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
ASTM F 1332 : 1999 : R2005 | Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10) |
BS ISO 12108:2012 | Metallic materials. Fatigue testing. Fatigue crack growth method |
ASTM D 7193 : 2017 : REDLINE | Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
ASTM C 1366 : 2004 : R2013 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
ASTM D 5086 : 2001 | Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
ASTM E 1611 : 2000 : R2007 | Standard Guide for Conducting Sediment Toxicity Tests with Polychaetous Annelids |
ASTM D 3631 : 1999 : R2011 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
ASTM E 1733 : 1995 : R2002 : EDT 1 | Standard Guide for Use of Lighting in Laboratory Testing |
ASTM E 2599 : 2018 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
ASTM D 5576 : 2000 : R2013 | Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) |
ASTM D 2116 : 2016 : REDLINE | Standard Specification for FEP Resin Molding and Extrusion Materials |
ASTM D 1914 : 1995 : R1999 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis Atmospheres |
ASTM F 2869 : 2010 | Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface |
ASTM E 1191 : 2003 : REV A | Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids |
FM 1530 : 2016 | FIRE DEPARTMENT CONNECTIONS |
ASTM D 6568 : 2000 : R2018 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
ASTM D 6011 : 1996 : R2003 | Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer |
ASTM C 150/C150M : 2017-04 | SPECIFICATION FOR PORTLAND CEMENT |
ASTM F 1870 : 2016 : REDLINE | Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities |
ASTM F 961 : 2014 : REDLINE | Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) |
ASTM F 2257 : 2014 : REDLINE | Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) |
ASTM D 5026 : 2015 : REDLINE | Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension |
ASTM D 6722 : 2011 : REDLINE | Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis |
ASTM C 1424 : 2015 : REDLINE | TEST METHOD FOR MONOTONIC COMPRESSIVE STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE |
ASTM C 1525 : 2004 | Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching |
ASTM D 3648 : 2014 : REDLINE | Standard Practices for the Measurement of Radioactivity (Withdrawn 2023) |
ASTM E 1191 : 2003 : REV A : R2014 | Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids |
ASTM F 414 : 2015 : REDLINE | Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger |
ASTM C 1475 : 2017 : REDLINE | Standard Guide for Determination of Neptunium-237 in Soil |
ASTM D 6275 : 1998 : R2003 | Standard Practice for Laboratory Testing of Bridge Decks (Withdrawn 2004) |
IEC 63003:2015 | Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505™ |
NSF 2 : 2015 | FOOD EQUIPMENT |
NSF 49 : 2016 | BIOSAFETY CABINETRY: DESIGN, CONSTRUCTION, PERFORMANCE, AND FIELD CERTIFICATION |
CSA 6.25 : 2005 | CYLINDER CONNECTION DEVICES |
CSA 6.20 : 2010 : R2015 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
ASTM C 1620 : 2016-03 | SPECIFICATION FOR AEROSOL POLYURETHANE AND AEROSOL LATEX FOAM SEALANTS |
ASTM E 1602 : 2003 : R2017 | Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
ASTM E 1602 : 2003 | Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
NSF 7 : 2016 | COMMERCIAL REFRIGERATORS AND FREEZERS |
CSA 6.20 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
CSA 9.1 : 2009 : INC : ADD B : 2013 : R2014 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
NASA HDBK 6007 : 2013 | HANDBOOK FOR RECOMMENDED MATERIAL REMOVAL PROCESSES FOR ADVANCED CERAMIC TEST SPECIMENS AND COMPONENTS |
NSF 20 : 2016 | COMMERCIAL BULK MILK DISPENSING EQUIPMENT |
ASTM E 1602 : 2003 : R2010 : EDT 1 | Standard Guide for Construction of Solid Fuel Burning Masonry Heaters |
CSA 9.1 : 2009 : INC : ADD A : 2012 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
ANSI Z83.8 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
ASTM E 2634 : 2017-06 | SPECIFICATION FOR FLAT WALL INSULATING CONCRETE FORM (ICF) SYSTEMS |
CSA 2.37 : 2014 | GAS-FIRED OUTDOOR INFRARED PATIO HEATERS |
CSA 9.1 : 2009 : INC : ADD B : 2013 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
CSA 9.1 : 2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
ASTM F 2885 : 2017 : REDLINE | Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications |
ASTM D 5574 : 1994 : R2005 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
ASTM D 5814 : 2011-01 | PRACTICE FOR DETERMINATION OF CONTAMINATION IN RECYCLED POLY(ETHYLENE TEREPHTHALATE) (PET) FLAKES AND CHIPS USING A PLAQUE TEST |
FM 5551 : 1963 | STRAINERS FOR USE WITH WATER BASED FIRE PROTECTION SYSTEMS |
ASTM D 5524 : 1994 | Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography |
API MPM CH15 : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 15: GUIDELINES FOR THE USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI) IN THE PETROLEUM AND ALLIED INDUSTRIES |
ANSI Z21.69 : 2015 | CONNECTORS FOR MOVEABLE GAS APPLIANCES |
ASTM C 115 : 2010 | Standard Test Method for Fineness of Portland Cement by the Turbidimeter |
FM 1951,52,53 : 2016 | PIPE HANGER COMPONENTS FOR AUTOMATIC SPRINKLER SYSTEMS |
A-A-52201 Revision B:2010 | Pan, Baking and Roasting, Aluminum; Pan Cover and Warmer Adapter; for Range, Field, Gasoline |
AWWA D121 : 2014 | BOLTED ABOVEGROUND THERMOSETTING FIBERGLASS-REINFORCED PLASTIC PANEL-TYPE TANKS FOR WATER STORAGE |
ANSI Z21.18 : 2007 : INC : ADD A : 2010 : R2012 | GAS APPLIANCE PRESSURE REGULATORS |
CSA B109 : 2017 | NATURAL GAS FOR VEHICLES INSTALLATION CODE |
ASTM C 1327 : 2015 : REDLINE | TEST METHOD FOR VICKERS INDENTATION HARDNESS OF ADVANCED CERAMICS |
ASTM E 2431 : 2012 : REDLINE | Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings |
ASTM D 1739 : 1998 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
IEEE 1278.1-2012 | IEEE Standard for Distributed Interactive Simulation--Application Protocols |
NFPA T3.5.14 : 2009 : R2014 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
API 16A CHINESE : 2004 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
FM 4924 : 2013 | PIPE AND DUCT INSULATION |
BS IEC 62265:2005 | Advanced library format (ALF) describing integrated circuit (IC) technology, cells and blocks |
ASTM D 6011 : 1996 | Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer |
ASTM D 7115 : 2010 | Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
ASTM E 1847 : 1996 | Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines |
FM 1043 : 2011 | WATER FLOW DETECTOR TESTERS 1 INCH THROUGH 8 INCH NOMINAL SIZE |
ASTM C 1326 : 2013 | Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics |
ASTM C 1725 : 2017 : REDLINE | Standard Guide for Hot Cell Specialized Support Equipment and Tools |
ASTM F 2886 : 2017 : REDLINE | Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications |
ASTM D 1739 : 1998 : R2004 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
ASTM D 6645 : 2001 | Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry |
FM 1333 : 2018 | DIESEL ENGINE FIRE PUMP DRIVERS |
MIL-DTL-32532 Base Document:2015 | LIFE RAFT, INFLATABLE, 25-PERSON MARK-7 MOD 2, AND 50-PERSON MARK-8 MOD 2 |
A-A-50179 Revision C:2015 | PANS, WITH OR WITHOUT COVERS, FOOD SERVING, RECTANGULAR, SOUP TUREEN AND ROUND INSETS FOR HOT FOOD TABLES AND COLD FOOD COUNTERS |
FM 1344 : 2010 | AIR RELEASE VALVES 1/2 INCH THROUGH 1 INCH NOMINAL SIZE |
NSF 37 : 2017 | AIR CURTAIN FOR ENTRANCEWAYS FOR FOOD AND FOOD SERVICE ESTABLISHEMENTS |
A-A-55057 Revision B:2010 | PANELS, WOOD/WOOD BASED: CONSTRUCTION AND DECORATIVE |
CSA 8.4 : 2014 | GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES |
ANSI Z21.21 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
A-A-52420 Revision A:2013 | Plug, Expansion |
UFC 1-300-01 : V20060228 | UNIFIED FACILITIES CRITERIA - CRITERIA FORMAT STANDARD |
A-A-55760 Revision A:2011 | RUBBER, SILICONE; STRIP, SHAPE 16 |
ASTM E 1847 : 1996 : R2003 | Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines |
MSS SP 86 : 2014 | GUIDELINES FOR METRIC DATA IN STANDARDS FOR VALVES, FLANGES, FITTINGS, AND ACTUATORS |
ASTM E 2573 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
ASTM E 729 : 1996 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
ASTM D 5527 : 2000 : R2007 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
ISA RP42.00.01 : 2001 | NOMENCLATURE FOR INSTRUMENT TUBE FITTINGS |
ASTM D 4727/D4727M : 2017 : REDLINE | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
ASTM D 5086 : 2001 : R2008 | Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
AASHTO M 201 : 2015 | SPECIFICATION FOR MIXING ROOMS, MOIST CABINETS, MOIST ROOMS, AND WATER STORAGE TANKS USED IN THE TESTING OF HYDRAULIC CEMENTS AND CONCRETES |
ANSI Z21.77 : 2005 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
ASTM E 2929 : 2013 | Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction |
ANSI Z83.26 : 2014 | GAS-FIRED OUTDOOR INFRARED PATIO HEATERS |
ANSI Z83.18 : 2017 | RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS |
ANSI Z83.4-2017/CSA 3.7-2017 | NON-RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATION |
SAE J 2600 : 2015 | Compressed Hydrogen Surface Vehicle Fueling Connection Devices<br> |
ASTM D 4474 : 2000 | Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008) |
ASTM D 5594 : 1998 : R2012 | Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR) |
ASTM F 562 : 2013 : REDLINE | Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035) |
ASTM E 1740 : 2015 : REDLINE | Standard Test Method for Determining the Heat Release Rate and Other<brk/> Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
FM 4471 : 2010 | CLASS 1 PANEL ROOFS |
ANSI Z21.94 : 2006 : INC : ADD A : 2007 : R2016 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
ANSI Z21.81 : 2005 | CYLINDER CONNECTION DEVICES |
ANSI Z21.15 : 2009 : INC : ADD B : 2013 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
ANSI Z21.60-2017/CSA 2.26-2017 | DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING FIREPLACES |
SAE TSB 003 : 1999 | RULES FOR SAE USE OF SI (METRIC) UNITS |
ANSI Z21.41 : 2014 | QUICK DISCONNECT DEVICES FOR USE WITH GAS FUEL APPLIANCES |
ANSI Z21.81 : 2005 : INC : ADD A : 2007 : R2015 | CYLINDER CONNECTION DEVICES |
ANSI Z21.15:2009 | MANUALLY OPERATED GAS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE END VALVES |
ANSI Z21.78 : 2010 | COMBINATION GAS CONTROLS FOR GAS APPLIANCES |
ANSI Z21.94 : 2006 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
CSA 6.3 : 2007 : INC : ADD A : 2010 | GAS APPLIANCES PRESSURE REGULATORS |
ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2017 | AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
ASTM D 5156 : 2002 : R2016 | Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption) |
CSA 6.31 : 2006 : INC : ADD A : 2007 : R2016 | AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS |
FM 5138 : 2011 | PROPORTIONING TESTING |
NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
ASTM E 1192 : 1997 : R2014 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
ASTM D 4800 : 1994 : R2005 | Standard Guide for Classifying and Specifying Adhesives |
ASTM E 1590 : 2017 : REDLINE | Standard Test Method for Fire Testing of Mattresses |
NSF 14159-1 : 2014 | HYGIENE REQUIREMENTS FOR THE DESIGN OF MEAT AND POULTRY PROCESSING EQUIPMENT |
ANSI Z83.20-2016/CSA 2.34-2016 | Gas-fired tubular and low-intensity infrared heaters |
ASTM D 6880 : 2005 | Standard Specification for Wood Boxes |
IEEE 1641.1-2013 | IEEE Guide for the Use of IEEE Std 1641, IEEE Standard for Signal and Test Definition |
ISA 77.42.01 : 1999 | FOSSIL FUEL POWER PLANT FEEDWATER CONTROL SYSTEM - DRUM TYPE |
ASTM E 1191 : 2003 | Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids |
NSF 5 : 2016 | WATER HEATERS, HOT WATER SUPPLY BOILERS, AND HEAT RECOVERY EQUIPMENT |
ASTM F 221 : 1998 | Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom |
ASTM E 1782 : 2014 : REDLINE | Standard Test Method for Determining Vapor Pressure by Thermal Analysis |
CSA 12.3 : 2014 | FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES |
FM 1370 : 2018 | CENTRIFUGAL FIRE PUMPS (VERTICAL SHAFT, TURBINE TYPE, BARREL) |
FM 1311 : 2018 | CENTRIFUGAL FIRE PUMPS SPLIT-CASE TYPE (AXIAL OR RADIAL) |
CSA 6.22 : 2011 | LINE PRESSURE REGULATORS |
FM 6020 : 2016 | COMPOSITE INTERMEDIATE BULK CONTAINERS (IBCS) |
ASTM F 1295 : 2016 : REDLINE | Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) |
FM 5600 : 2013 | CLEAN AGENT EXTINGUISHING SYSTEMS |
NFPA 22 : 2018 | WATER TANKS FOR PRIVATE FIRE PROTECTION |
IEEE DRAFT 1671 : D5 2006 | AUTOMATIC TEST MARKUP LANGUAGE (ATML) FOR EXCHANGING AUTOMATIC TEST EQUIPMENT AND TEST INFORMATION VIA XML |
CSA O141 :2005 | SOFTWOOD LUMBER |
ASTM C 1499 : 2015 : REDLINE | TEST METHOD FOR MONOTONIC EQUIBIAXIAL FLEXURAL STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE |
ASTM D 4826 : 1988 : R1997 | Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard |
ASTM D 1914 : 1995 : R2010 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
ASTM F 67 : 2013 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
NSF 29 : 2017 | DETERGENT AND CHEMICAL FEEDERS FOR COMMERCIAL SPRAY-TYPE DISHWASHING MACHINES |
ASTM D 6573/D6573M : 2013 : REDLINE | Standard Specification for General Purpose Wirebound Shipping Boxes |
ASTM D 4800 : 1994 : R1999 | Standard Guide for Classifying and Specifying Adhesives |
ASTM C 1479 : 2016 : REDLINE | Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations |
ASTM E 729 : 1996 : R2014 | Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians |
ASTM E 2404 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
ASTM D 6645 : 2001 : R2010 | Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry |
ASTM E 2688 : 2018 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics |
FM 1055 : 2016 | WATER MOTOR GONGS |
NSF 13 : 2017 | REFUSE PROCESSORS AND PROCESSING SYSTEMS |
ASTM E 1562 : 2000 : R2006 | Standard Guide for Conducting Acute, Chronic, and Life-Cycle Aquatic Toxicity Tests with Polychaetous Annelids |
ASTM C 861 : 1993 : R2014 | Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes |
ASTM C 909 : 1993 : R2005 | Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes |
ASTM D 6255/D6255M:2005 | Standard Specification for Steel or Aluminum Slotted Angle Crates |
ASTM D 5991 : 2017 : REDLINE | Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake |
ASTM D 5527 : 2000 : R2002 : EDT 1 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
ASTM D 6330 : 1998 | Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
ASTM C 158 : 2002 : R2007 | Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture) |
ASTM D 4275 : 2017 : REDLINE | Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography |
ASTM F 3160 : 2016 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
ASTM D 5085 : 2002 : R2013 | Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
ASTM C 1328/C1328M : 2012 : REDLINE | SPECIFICATION FOR PLASTIC (STUCCO) CEMENT |
ASTM C 1674 : 2016 : REDLINE | Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures |
ASTM D 5085 : 2002 | Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
ASTM C 861 : 1993 : R2005 | Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes |
ASTM C 1624 : 2005 | Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing |
ASTM D 6780/D6780M : 2012 : REDLINE | Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR) |
ASTM D 3094 : 2000 : R2005 | Standard Test Method for Seepage Rate of Aerosol Products |
ASTM C 1470 : 2006 : R2013 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
ASTM D 3631 : 1999 : R2004 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
FM 1612 : 2016 | POLYVINYL CHLORIDE (PVC) PIPE AND FITTING FOR UNDERGROUND FIRE PROTECTION SERVICE |
ASTM D 7589 : 2016 : REDLINE | Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine<rangeref></rangeref > |
ASTM D 6780 : 2005 | Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR) |
ASTM E 1733 : 1995 : R2014 | Standard Guide for Use of Lighting in Laboratory Testing |
ASTM C 1863 : 2018 | Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization |
ASTM E 1399/E1399M : 1997 : R2017 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
ASTM F 1813 : 2013 : REDLINE | Standard Specification for Wrought Titanium<span class='unicode'>–</span>12 Molybdenum<span class='unicode'>–</span>6 Zirconium<span class='unicode'>–</span>2 Iron Alloy for Surgical Implant (UNS R58120) |
ASTM C 1291 : 2018 : REDLINE | Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics |
ASTM D 5156 : 2002 | Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption) |
ASTM D 6254/D6254M : 2013 : REDLINE | Standard Specification for Wirebound Pallet-Type Wood Boxes |
ASTM D 5021 : 2000 | Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007) |
ASTM E 1434 : 2000 : R2006 | Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases |
IEC 62529:2012 | Standard for Signal and Test Definition |
GOST 849:2018 | Primary nickel. SpecificationsE |
NSF 4 : 2016 | COMMERCIAL COOKING, RETHERMALIZATION, AND POWERED HOT FOOD HOLDING AND TRANSPORTATION EQUIPMENT |
CSA 6.25 : 2005 : INC : ADD A : 2007 : R2015 | CYLINDER CONNECTION DEVICES |
ASTM E 1192 : 1997 : R2003 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
ASTM E 2988 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics |
FM 5700 : 2018 | EXPLOSION SUPPRESSION SYSTEMS |
FM 2151 : 2015 | HOSE HOUSES AND OUTDOOR HOSE CABINETS |
FM 1034 : 2013 | AIR DRYING UNITS |
ASTM D 4473 : 2008 | Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior |
FM 3990 : 2018 | LESS OR NONFLAMMABLE LIQUID-INSULATED TRANSFORMERS |
17/30361445 DC : DRAFT SEP 2017 | BS ISO 12108 - METALLIC MATERIALS - FATIGUE TESTING - FATIGUE CRACK GROWTH METHOD |
FM 1042 : 2016 | VANE-TYPE WATERFLOW ALARM INDICATORS |
FM 1613 : 2017 | POLYETHYLENE (PE) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE |
ASTM D 6867 : 2003 : R2009 | Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing |
FM 2111,2131 : 2014 | FIRE HOSE ASSEMBLIES AND FIRE HOSE COUPLINGS |
ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
ASTM C 1368 : 2018 : REDLINE | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature |
NSF 25 : 2017 | VENDING MACHINES FOR FOOD BEVERAGES |
ASTM E 1193:1997 | Standard Guide for Conducting Daphnia magna Life-Cycle Toxicity Tests |
IEEE 384-2008 REDLINE | IEEE Standard Criteria for Independence of Class 1E Equipment and Circuits |
IEEE 270-2006 | IEEE Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI) |
API MPM CH15 : 2001 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 15: GUIDELINES FOR THE USE OF THE INTERNATIONAL SYSTEM OF UNITS (SI) IN THE PETROLEUM AND ALLIED INDUSTRIES |
API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
NSF 51 : 2014 | FOOD EQUIPMENT MATERIALS |
ASTM D 1914 : 1995 : R2004 : EDT 1 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
MIL-C-42066 Revision A:2000 | CARRIER, LITTER, WHEELED |
NSF 35 : 2017 | HIGH PRESSURE DECORATIVE LAMINATES FOR SURFACING FOOD SERVICE EQUIPMENT |
IEEE 1293-1998 | IEEE Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Non-Gyroscopic Accelerometers |
ASTM D 346/D346M : 2011 : REDLINE | Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis |
ASTM D 6457 : 2008 | Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) |
ASTM D 3294 : 2015 : REDLINE | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes |
NACE SP 03 95 : 2013 | FUSION-BONDED EPOXY COATING OF STEEL REINFORCING BARS |
ASTM E 2574/E2574M : 2017 : REDLINE | Standard Test Method for Fire Testing of School Bus Seat Assemblies |
ASTM D 4591 : 2017 : REDLINE | Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry |
ASTM D 3307 : 2016 : REDLINE | Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
CSA 6.8 : 2005 | PILOT GAS FILTERS |
FM 2141 : 2015 | HOSE RACKS AND REELS |
FM 1631 : 2006 | ADJUSTABLE AND FIXED SPRINKLER FITTINGS 1/2 INCH THROUGH 1 INCH NOMINAL SIZE |
MIL-STD-962 Revision D:2003 | DEFENSE STANDARDS FORMAT AND CONTENT |
NISO Z39.18 : 1995 | SCIENTIFIC AND TECHNICAL REPORTS - PREPARATION, PRESENTATION, AND PRESERVATION |
BS ISO 13837:2008 | Road vehicles. Safety glazing materials. Method for the determination of solar transmittance |
ASTM D 5575 : 2007 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
FM 2311 : 2008 | VACUUM AND PRESSURE GAUGES FOR FIRE PROTECTION SYSTEMS |
AWS C2.23M/C2.23 : 2003 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
ASTM C 1361 : 2010 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures |
CSA 6.23 : 2005 : R2015 | MANUALLY OPERATED PIEZO-ELECTRIC SPARK GAS IGNITION SYSTEMS AND COMPONENTS |
ANSI Z21.80:2011 | LINE PRESSURE REGULATORS |
CSA 6.3 : 2007 : INC : ADD B : 2012 : R2016 | GAS APPLIANCES PRESSURE REGULATORS |
MIL-STD-961 Revision E:2003 | DEFENSE AND PROGRAM-UNIQUE SPECIFICATIONS FORMAT AND CONTENT |
A-A-55137 Revision A:2017 | SAW, JIG, WOODWORKING |
ASTM D 1739 : 1998 : R2010 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
ASTM E 1611 : 2000 | Standard Guide for Conducting Sediment Toxicity Tests with Marine and Estuarine Polychaetous Annelids |
ANSI Z83.19-2017/CSA 2.35-2017 | Gas-fired high-intensity infrared heaters |
CSA A440 : 2017 | NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS |
FM 1636 : 2003 | FIRE RESISTANT BARRIERS FOR USE WITH CPVC PIPE AND FITTINGS IN LIGHT HAZARD OCCUPANCIES |
ASTM C 1525 : 2004 : R2013 | Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching |
CSA 6.3 : 2007 : INC : ADD A : 2010 : R2012 | GAS APPLIANCES PRESSURE REGULATORS |
CSA 6.3 : 2007 : INC : ADD B : 2012 | GAS APPLIANCES PRESSURE REGULATORS |
ANSI Z21.47 : 2016 | GAS-FIRED CENTRAL FURNACES |
FM 1319 : 2018 | CENTRIFUGAL FIRE PUMPS (HORIZONTAL, END SUCTION TYPE) |
ASTM D 3594 : 1993 : R2013 | Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers (Withdrawn 2019) |
ASTM C 158 : 2002 | Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture) |
ASTM C 1401 : 2014 : REDLINE | Standard Guide for Structural Sealant Glazing |
ASTM D 7301 : 2011 | Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose |
NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
FM 1364 : 2013 | EXPANSION CHAMBERS |
ASTM E 1192 : 1997 : R2008 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
ASTM F 221 : 1998 : R2009 | Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom (Withdrawn 2015) |
FM 1336 : 2011 | FLEXIBLE FIRE PUMP COUPLINGS AND FLEXIBLE CONNECTING SHAFTS FOR FIRE PROTECTION SERVICE |
ASTM C 1275 : 2018 : REDLINE | Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature |
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
IEEE 260.1 : 2004 | LETTER SYMBOLS FOR UNITS OF MEASUREMENT (SI UNITS, CUSTOMARY INCH-POUND UNITS, AND CERTAIN OTHER UNITS) |
IEEE 1076.1.1-2011 | IEEE Standard for VHDL Analog and Mixed-Signal Extensions -- Packages for Multiple Energy Domain Support |
IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
IEEE 1560-2005 | IEEE Standard for Methods of Measurement of Radio Frequency Power Line Interference Filter in the Range of 100 Hz to 10 GHz |
ASTM D 4800 : 1994 : R2011 | Standard Guide for Classifying and Specifying Adhesives |
ASTM D 7293 : 2012 : REDLINE | Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) |
ISA 77.44.01 : 2007 | FOSSIL FUEL POWER PLANT - STEAM TEMPERATURE CONTROLS |
SAE ARP 1270 : 2015 | AIRCRAFT CABIN PRESSURIZATION CRITERIA |
FM 1041 : 2006 | ALARM CHECK VALVES |
ASTM E 1733 : 1995 : R2008 | Standard Guide for Use of Lighting in Laboratory Testing |
ASTM F 2779 : 2010 | Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface |
ASTM D 7115 : 2010 : R2015 | Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
ASTM C 1323 : 2016 : REDLINE | Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature |
NFPA T3.5.14 : 2009 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
NFPA T3.19.18 : 2009 : R2014 | FLUID POWER - SEALING DEVICES - GROOVE DIMENSIONS FOR RADIAL COMPRESSION TYPE PISTON RINGS |
CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
CSA NGV 6.1 : 2016 | COMPRESSED NATURAL GAS (CNG) FUEL STORAGE AND DELIVERY SYSTEMS FOR ROAD VEHICLES |
ANSI Z21.24 : 2015 | CONNECTORS FOR GAS APPLIANCES |
ASTM D 5014 : 1994 : R2000 : EDT 1 | Standard Test Method for Measurement of Formaldehyde in Indoor Air (Passive Sampler Methodology) (Withdrawn 2006) |
ASTM D 6880/D6880M : 2011 : REDLINE | Standard Specification for Wood Boxes |
ASTM D 2238 : 1992 : R2012 : EDT 1 | Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm<sup>−1</sup> (Withdrawn 2021) |
ASTM E 1688 : 2010 : R2016 | Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates |
ASTM C 158 : 2002 : R2012 | Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture) |
ASTM D 245 : 2006 : R2011 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
ASTM D 5086 : 2001 : R2013 | Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
ASTM D 8133 : 2017 | Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry |
ASTM D 1430 : 2017 : REDLINE | Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
ASTM F 2066 : 2018 : REDLINE | Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) |
ASTM D 2260 : 2003 : R2009 | Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems |
ASTM F 1350 : 2015 : REDLINE | Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673) |
ASTM D 1710 : 2015 : REDLINE | Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
ASTM E 1391 : 2003 : R2008 | Standard Guide for Collection, Storage, Characterization, and Manipulation of Sediments for Toxicological Testing and for Selection of Samplers Used to Collect Benthic Invertebrates |
ASTM D 3631 : 1999 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
ASTM D 6330 : 1998 : R2003 | Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
ASTM E 1192 : 1997 | Standard Guide for Conducting Acute Toxicity Tests on Aqueous Ambient Samples and Effluents with Fishes, Macroinvertebrates, and Amphibians |
ASTM D 5502 : 2000 : R2015 | Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
ASTM F 1251 : 1989 : R2003 | Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices (Withdrawn 2012) |
ASTM F 2321 : 2014 : REDLINE | Standard Specification for Flexible and Rigid Insulated Temporary By-Pass Jumpers |
ASTM C 1470 : 2006 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
ASTM C 1834 : 2016 | Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures |
ASTM D 6202 : 2002 | Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine (Withdrawn 2009) |
ASTM E 1822 : 2017 : REDLINE | Standard Test Method for Fire Testing of Stacked Chairs |
ASTM F 621 : 2012 : R2017 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
ASTM E 1309 : 2000 : R2011 | Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases (Withdrawn 2015) |
ASTM D 4438 : 2013 | Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting |
ASTM D 6984 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE IIIF, SPARK-IGNITION ENGINE |
ASTM D 3222 : 2005 : R2010 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
ASTM D 7219 : 2008 | Standard Specification for Isotropic and Near-isotropic Nuclear Graphites |
ASTM D 7779 : 2011 : R2015 | Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature |
ASTM F 67 : 2013 : R2017 | Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) |
ASTM E 1022 : 1994 : R2007 | Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks |
ASTM E 1295 : 2001 : R2013 | Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with <emph type="ital">Ceriodaphnia dubia</emph><emph type="bold"> |
ASTM E 1847 : 1996 : R2008 | Standard Practice for Statistical Analysis of Toxicity Tests Conducted Under ASTM Guidelines |
ASTM D 6251/D6251M : 2011 : REDLINE | Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
GEIA OP 0002 : 2002 | STYLE MANUAL FOR STANDARDS AND OTHER PUBLICATIONS OF TECHAMERICA |
API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
ASTM D 7993 : 2015 | Standard Guide for Analyzing Complex Phthalates |
ASTM E 1309 : 2000 : R2005 | Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases |
ASTM D 4800 : 1994 : R2015 | Standard Guide for Classifying and Specifying Adhesives |
ASTM E 1399 : 1997 : R2000 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
ASTM E 2122 : 2002 : R2007 | Standard Guide for Conducting In-situ Field Bioassays With Caged Bivalves |
ASTM C 1292 : 2016 : REDLINE | Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
ASTM G 3 : 2014 | Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing |
ASTM D 5757:2011 | Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets |
ASTM E 2455 : 2006 : R2013 | Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels (Withdrawn 2022) |
ASTM E 1525 : 2002 : R2014 | Standard Guide for Designing Biological Tests with Sediments |
ASTM D 3684 : 1994 : R2000 | Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method |
ASTM C 1068 : 2015 : REDLINE | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM D 6256/D6256M : 2016 : REDLINE | Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases |
ASTM C 861 : 1993 : R2010 | Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes |
ASTM C 1366 : 2004 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures |
ASTM B 966 : 2010 | Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas (Withdrawn 2015) |
ASTM C 91/C91M : 2012-05 | SPECIFICATION FOR MASONRY CEMENT |
ASTM D 4826 : 1988 : R2007 | Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard (Withdrawn 2010) |
ASTM F 621 : 2012 | Standard Specification for Stainless Steel Forgings for Surgical Implants |
ASTM D 5815 : 1995 : R2001 : EDT 1 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC) (Withdrawn 2009) |
ASTM C 1472 : 2016 : REDLINE | Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width |
ASTM D 6330 : 1998 : R2008 | Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
ASTM D 6474 : 2012 : REDLINE | Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography |
NSF 8 : 2017 | COMMERCIAL POWERED FOOD PREPARATION EQUIPMENT |
CSA 3.8 : 2014 | GAS-FIRED EQUIPMENT FOR DRYING FARM CROPS |
EN ISO 13533:2001/AC:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
NFPA 804 : 2020 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
BS EN ISO 13533:2002 | Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
EN 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
I.S. EN ISO 13533:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
NSF 59 : 2017 | MOBILE FOOD CARTS |
ASME B89.1.13 : 2013 | Micrometers |
ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
ASTM D 4361 : 2010 : REDLINE | TEST METHOD FOR DETERMINING LOGARITHMIC VISCOSITY NUMBER OF POLY (VINYL CHLORIDE) (PVC) IN FORMULATED COMPOUNDS |
ASME A18.1 : 2017 | SAFETY STANDARD FOR PLATFORM LIFTS AND STAIRWAY CHAIRLIFTS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.