IEEE C37.41-2008 REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
09-12-2016
03-13-2009
1. Overview
2. Normative references
3. Definitions
4. Normal (usual) and special (unusual) service
conditions
5. Classifications, ratings, and characteristics
6. Required design (type) tests
7. Common test requirements for all design tests
8. Dielectric tests
9. Interrupting tests
10. Radio-influence tests
11. Temperature-rise tests
12. Time-current tests
13. Manual-operation, thermal-cycle, and bolt-torque
tests
14. Liquid-tightness tests for current-limiting fuses and
FEPs
15. Static-relief pressure tests for expulsion fuses that use
expendable caps
16. Lightning surge impulse withstand test for fuse links
17. Withstand tests for fuses intended for motor circuit
applications
18. Tests for expulsion fuses having cutout fuse supports
utilizing polymeric insulators
Annex A (normative) - Test requirements for additional
devices
Annex B (informative) - Recommended methods for determining
the value of a sinusoidal current wave and a
power-frequency recovery voltage
Annex C (informative) - Recommended method of determining
the equivalent steady-state rms current for plotting
time-current curves
Annex D (informative) - Simplified fault-current calculation -
interrupting duty and rated short-time withstand
current
Annex E (informative) - Transient recovery voltage (TRV)
parameters
Annex F (normative) - Criteria for determining I[t] testing
validity for current-limiting fuses
Annex G (informative) - Bibliography
Defines test requirements for high-voltage (above 1000 V) fuses and accessories for use on ac electrical distribution systems.
| Committee |
Switchgear
|
| DevelopmentNote |
Supersedes IEEE DRAFT C37.41. (04/2001) Supersedes IEEE C37.41E. (01/2011)
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-5844-0
|
| Pages |
123
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| IEEE C37.73-1998 | IEEE Standard Requirements for Pad-Mounted Fused Switchgear |
| IEEE DRAFT C37.48 : D5 NOV 96 | GUIDE FOR APPLICATION, OPERATION AND MAINTENANCE OF HIGH-VOLTAGE FUSES, DISTRIBUTION ENCLOSED SINGLE-POLE AIR SWITCHES, FUSE DISCONNECTING SWITCHES, AND ACCESSORIES |
| IEEE C37.40-2003 | IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| IEEE DRAFT C37.48.1 : D13 2000 | DRAFT GUIDE FOR THE OPERATION, CLASSIFICATION, APPLICATION AND COORDINATION OF CURRENT-LIMITING FUSES WITH RATED VOLTAGES 1-38 KV |
| IEEE C37.20.2-2015 | IEEE Standard for Metal-Clad Switchgear |
| NFPA 70B : 2016 | RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
| IEEE C57.12.20-2011 REDLINE | IEEE Standard for Overhead-Type Distribution Transformers 500 kVA and Smaller: High Voltage, 34 500 V and Below; Low Voltage, 7970/13 800Y V and Below |
| IEEE C37.48.1-2002 | IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV |
| IEEE C37.42-2009 | SWITCHGEAR DISTRIBUTION CUTOUTS AND FUSE LINKS SPECIFICATIONS |
| 08/30184557 DC : DRAFT JUNE 2008 | BS EN 62271-111 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 111: PAD-MOUNTED, DRY VAULT, AND SUBMERSIBLE AUTOMATIC CIRCUIT RECLOSERS AND FAULT INTERRUPTERS FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV |
| IEEE C37.48-2005 | IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| IEEE C37.302-2015 | IEEE Guide for Fault Current Limiter (FCL) Testing of FCLs Rated above 1000 V AC |
| IEEE DRAFT C37.108 : D6 98 | DRAFT GUIDE FOR THE PROTECTION OF NETWORK TRANSFORMERS |
| CSA C310 : 2009 : R2014 | DISTRIBUTION CLASS POLYMERIC CUTOUTS |
| IEC 62271-111:2012 | High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
| NEMA SG 2 : 1993 | HIGH VOLTAGE FUSES |
| UFC 3-550-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION |
| 18/30356222 DC : DRAFT MAR 2018 | BS EN 60282-4 - ADDITIONAL TESTING REQUIREMENTS FOR HIGH-VOLTAGE EXPULSION FUSES UTILIZING POLYMERIC INSULATORS |
| ANSI C37.44 : 1981 | AMERICAN NATIONAL STANDARD SPECIFICATIONS FOR DISTRIBUTION OIL CUTOUTS AND FUSE LINKS |
| IEEE C57.12.39-2017 | IEEE Standard for Requirements for Distribution Transformer Tank Pressure Coordination |
| IEEE DRAFT C37.20.4 : 2001 | DRAFT STANDARD FOR INDOOR AC SWITCHES RATED ABOVE 1KV THROUGH 38KV FOR USE IN METAL-ENCLOSED SWITCHGEAR |
| IEEE C37.47-2011 | IEEE Standard Specifications for High-Voltage (>1000 V) Distribution Class Current-Limiting Type Fuses and Fuse Disconnecting Switches |
| IEEE C37.46-2010 | IEEE Standard Specifications for High-Voltage (>1000 V) Expulsion and Current-Limiting Power Class Fuses and Fuse Disconnecting Switches |
| CSA C310 : 2009 | DISTRIBUTION CLASS POLYMERIC CUTOUTS |
| IEC 60282-2:2008 | High-voltage fuses - Part 2: Expulsion fuses |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| PD IEC/TR 62655:2013 | Tutorial and application guide for high-voltage fuses |
| IEEE/IEC C37.60-2012 | IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
| IEEE DRAFT 551 : D5 2005 | CALCULATING AC SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| IEEE C37.74-2014 REDLINE | IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV |
| IEEE 495 : 2007 | TESTING FAULTED CIRCUIT INDICATORS |
| IEEE C57.12.20-2011 | TRANSFORMERS - STANDARD FOR OVERHEAD TYPE DISTRIBUTION TRANSFORMERS, 500 KVA AND SMALLER: HIGH VOLTAGE, 34500 VOLTS AND BELOW: LOW VOLTAGE, 7970/13800Y VOLTS AND BELOW |
| IEEE C37.42-2009 | IEEE Standard Specifications for High-Voltage (> 1000 V) Expulsion-Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links, and Accessories Used with These Devices |
| IEEE C37.43-2008 | IEEE Standard Specifications for High-Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors |
| CSA C310 : 2009 : INC : UPD 2 : 2012 | DISTRIBUTION CLASS POLYMERIC CUTOUTS |
| IEEE C37.46-2010 | FOR HIGH VOLTAGE EXPULSION AND CURRENT-LIMITING TYPE POWER CLASS FUSES AND FUSE DISCONNECTING SWITCHES |
| IEC TR 62655:2013 | Tutorial and application guide for high-voltage fuses |
| IEEE 1247 : 2005 | INTERRUPTER SWITCHES FOR ALTERNATING CURRENT, RATED ABOVE 1000 V |
| IEEE 18-2012 | IEEE Standard for Shunt Power Capacitors |
| IEEE 551 : 2006 | CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| IEEE DRAFT C57.12.20 : D10C 2004 | OVERHEAD TYPE DISTRIBUTION TRANSFORMERS, 500 KVA AND SMALLER: HIGH VOLTAGE, 34 500 VOLTS AND BELOW; LOW VOLTAGE, 7970/13 800Y VOLTS AND BELOW |
| IEEE C37.48.1-2011 REDLINE | IEEE Guide for the Application, Operation, and Coordination of High-Voltage (>1000 V) Current-Limiting Fuses |
| IEEE C37.100.1-2007 | IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
| IEEE 4-1995 | IEEE Standard Techniques for High-Voltage Testing |
| IEEE C37.42-2009 | IEEE Standard Specifications for High-Voltage (> 1000 V) Expulsion-Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links, and Accessories Used with These Devices |
| IEC 60282-1:2009+AMD1:2014 CSV | High-voltage fuses - Part 1: Current-limiting fuses |
| IEC 60549:2013 | High-voltage fuses for the external protection of shunt capacitors |
| IEEE C37.48-2005 | IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| IEEE C37.43-2008 | IEEE Standard Specifications for High-Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| IEEE C37.20.3-2013 REDLINE | IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
| IEEE 1247 : 2005 | INTERRUPTER SWITCHES FOR ALTERNATING CURRENT, RATED ABOVE 1000 V |
| IEEE C37.40-2003 | IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| IEEE C63.2-2009 | American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications |
| NEMA CC1 : 2009(R2015) | ELECTRIC POWER CONNECTORS FOR SUBSTATIONS |
| IEEE C37.20.3-2001 | IEEE Standard for Metal-Enclosed Interrupter Switchgear |
| IEEE C37.45-2007 | IEEE Standard Specifications for High Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 through 8.3 kV |
| IEEE 18-2012 | IEEE Standard for Shunt Power Capacitors |
| IEEE C37.48.1-2002 | IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV |
| IEC 60282-2:2008 | High-voltage fuses - Part 2: Expulsion fuses |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.