ISO 105-A02:1993
Current
Current
The latest, up-to-date edition.
Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
08-26-1993
Describes the grey scale for determining changes in colour of textiles in colour fastness tests, and its use. A precise colorimetric specification of the scale is given as a permanent record against which newly prepared working standards and standards that may have changed can be compared. The essential scale (5 steps) consists of pairs of non-glossy grey colour chips (or swatches of grey cloth). In addition, an augmented scale includes four half-steps and, thus, 9 steps.
| DevelopmentNote |
Also numbered as CGSB 4.2-46 (05/2001) Corrigendum 1 applies to French version only. (02/2002)
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| GOST R ISO 105-A02 : 1999 | Identical |
| NF EN 20105 A02 : 1994 | Identical |
| NEN ISO 105-A02 : 1994 | Identical |
| NS ISO 105.A02 : 2ED 1994 | Identical |
| I.S. EN 20105-A02:1995 | Identical |
| SANS 105-A02 : 1ED 1993(R2012) | Identical |
| SAC GB 250 : 1995 | Identical |
| SN EN 20105-A02 : 1994 | Identical |
| AS 2001.4.A02-2005 | Identical |
| SN ISO 105-A02:1984 | Identical |
| NF ISO 105-A02 : 1988 | Identical |
| BIS IS/ISO 105-A02 : 1993 | Identical |
| UNE-EN 20105-A02:1998 | Identical |
| BS EN 20105-A02:1995 | Identical |
| EN 20105-A02 : 1994 | Identical |
| DIN EN 20105-A02:1994-10 | Identical |
| UNE 40132:1984 | Identical |
| DIN EN 15836-2:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| ISO 17076:2006 | Leather Physical and mechanical tests Determination of abrasion resistance of automotive leather |
| DIN EN ISO 19712-2:2013-04 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| SAE J 1639 : 1995(S2017) | CLASSIFICATION SYSTEM FOR AUTOMOTIVE POLYAMIDE (PA) PLASTICS |
| DIN EN 13245-3:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| 05/30129295 DC : DRAFT FEB 2005 | EN ISO 105-E05 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING - ACID |
| BS ISO 105-F04:2001 | Textiles. Tests for colour fastness Specification for polyester adjacent fabric |
| 11/30213807 DC : 0 | BS ISO 14486 - LAMINATE FLOOR COVERINGS - LAMINATE FLOOR COVERING - SPECIFICATION |
| DIN EN ISO 26082-2 E : 2012 | LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 2: TUMBLING METHOD (ISO 26082-2:2012) |
| 15/30322585 DC : 0 | BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 14906:2012-08 | Leather - Leather for automotive - Test methods and testing parameters |
| PREN 17142 : DRAFT 2017 | MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 877:1997 | |
| BS ISO 11378-1:2000 | Textile floor coverings. Laboratory soiling tests Kappasoil test |
| PREN 438-2 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| PD CEN/TS 16641:2014 | Textile floor coverings. Guidelines for acceptable colour deviations |
| ISO 14486:2012 | Laminate floor coverings — Specification |
| 05/30132721 DC : DRAFT MAY 2005 | ISO 20712-2 - WATER SAFETY SIGNS AND BEACH SAFETY FLAGS - PART 2: SPECIFICATIONS FOR BEACH SAFETY FLAGS - COLOUR, SHAPE, MEANING AND PERFORMANCE |
| 06/30156314 DC : 0 | BS EN 13120 - INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| 03/319410 DC : DRAFT NOV 2003 | BS EN 14836 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - METHOD OF TEST - ARTIFICIAL WEATHERING |
| BIS IS/ISO 105-E05 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING: ACID |
| BS ISO 11377:1998 | Textile floor coverings. Floor soiling. Test site set-up and soiling evaluation |
| I.S. EN ISO 105-B10:2011 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011) |
| ISO 11640:2012 | Leather Tests for colour fastness Colour fastness to cycles of to-and-fro rubbing |
| DIN EN 15619 E : 2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| NF EN ISO 105 E07 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER |
| NF ISO 105-F05 : 2016 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART F05: SPECIFICATION FOR ACRYLIC ADJACENT FABRIC |
| BS 2782-5 Method 552A:1981 | Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light |
| 16/30315125 DC : 0 | BS EN ISO 15487 - TEXTILES - METHOD FOR ASSESSING APPEARANCE OF APPAREL AND OTHER TEXTILE END PRODUCTS AFTER DOMESTIC WASHING AND DRYING |
| DIN EN ISO 30023:2012-10 | Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2010) |
| DIN EN ISO 19712-2 E : 2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007) |
| DIN EN ISO 105-A11:2013-01 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASTNESS GRADES BY DIGITAL IMAGING TECHNIQUES (ISO 105-A11:2012) |
| 07/30160984 DC : 0 | BS EN ISO 11643 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS OF SMALL SAMPLES TO SOLVENTS |
| BIS IS 12673-2 : 2014 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 2: DETERMINATION OF SPECIMEN BREAKDOWN |
| UNE-EN ISO 19712-2:2013 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| I.S. EN ISO 17701:2016 | FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - COLOUR MIGRATION (ISO 17701:2016) |
| BS EN 16732:2015 | Slide fasteners (zips). Specification |
| ISO 3865:2005 | Rubber, vulcanized or thermoplastic Methods of test for staining in contact with organic material |
| 05/30133330 DC : DRAFT MAY 2005 | ISO 4665 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO WEATHERING |
| BS ISO 14486:2012 | Laminate floor coverings. Specification |
| 08/30179495 DC : DRAFT MAR 2008 | BS EN ISO 105-F09 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART F09: SPECIFICATION FOR COTTON RUBBING CLOTH |
| 12/30262104 DC : 0 | BS EN ISO 17228 - LEATHER - TESTS FOR COLOUR FASTNESS - CHANGE IN COLOUR WITH ACCELERATED AGEING |
| BS EN ISO 30013:2011 | Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties |
| 10/30196552 DC : 0 | BS EN ISO 15027-2 - IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY |
| BS ISO 11758 : 1995 AMD 9708 | RUBBER AND PLASTICS HOSES - EXPOSURE TO A XENON ARC LAMP - DETERMINATION OF CHANGES IN COLOUR AND APPEARANCE |
| 10/30235106 DC : 0 | BS EN ISO 11640 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING |
| BS EN 20105-A01:1993 | Textiles. Tests for colour fastness General principles of testing |
| 09/30196489 DC : 0 | BS ISO 105-A11 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASNESS GRADES BY DIGITAL IMAGING TECHNIQUES |
| DIN EN 16732 E : 2016 | SLIDE FASTENERS (ZIPS) - SPECIFICATION |
| 10/30229900 DC : 0 | BS EN ISO 17076-1 - LEATHER - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER METHOD |
| BS PAS 66(2009) : 2009 | OFFICIAL IDENTIFICATION EARTAGS FOR SHEEP AND GOATS - SPECIFICATION |
| BS EN ISO 26082-2:2012 | Leather. Physical and mechanical test methods for the determination of soiling Tumbling method |
| 13/30291069 DC : 0 | BS EN 12608-1 - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES |
| 08/30179483 DC : DRAFT MAR 2008 | BS EN ISO 105-F02 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART F02: SPECIFICATION FOR COTTON AND VISCOSE ADJACENT FABRICS |
| UNI EN 15836-2 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| 12/30212156 DC : 0 | BS EN 13138-3:2007 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
| BS ISO 105-F03:2001 | Textiles. Tests for colour fastness Specification for polyamide adjacent fabric |
| BS ISO 9405 : 2015 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE |
| 04/30126842 DC : DRAFT DEC 2004 | EN ISO 105-B07 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART B07: COLOUR FASTNESS TO LIGHT OF TEXTILES WETTED WITH PERSPIRATION |
| 07/30155372 DC : 0 | BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| UNE 56875:2014 | Kitchen furniture. Specifications, requirements, and test methods. |
| BS ISO 5912 : 2003 AMD 15519 | CAMPING TENTS |
| 09/30176542 DC : 0 | BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
| ISO 4665:2016 | Rubber, vulcanized or thermoplastic — Resistance to weathering |
| DIN EN 16732:2016-05 | SLIDE FASTENERS (ZIPS) - SPECIFICATION |
| ISO 20701:2017 | Leather — Tests for colour fastness — Colour fastness to saliva |
| 15/30321242 DC : 0 | BS EN ISO 12870 - OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS |
| BIS IS/ISO 105-E06 : 2006 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E06: COLOUR FASTNESS TO SPOTTING: ALKALI |
| I.S. EN ISO 3175-1:2018 | TEXTILES - PROFESSIONAL CARE, DRYCLEANING AND WETCLEANING OF FABRICS AND GARMENTS - PART 1: ASSESSMENT OF PERFORMANCE AFTER CLEANING AND FINISHING (ISO 3175-1:2017) |
| BS EN 15619:2014 | Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures |
| I.S. EN 15836-2:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| CGSB 4.2-24 : 2002(R2013) | TEXTILE TEST METHODS - COLOURFASTNESS AND DIMENSIONAL CHANGE IN COMMERCIAL LAUNDERING |
| UNI EN ISO 105-G02 : 1999 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO BURNT-GAS FUMES |
| ISO 105-F06:2000 | Textiles Tests for colour fastness Part F06: Specification for silk adjacent fabric |
| UNE-EN ISO 30013:2012 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| CGSB 4.2-18.3 : 1997(R2010) | TEXTILE TEST METHODS - TEXTILES - TESTS FOR COLOURFASTNESS - PART B02: COLOURFASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST |
| EN 14565:2004 | Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification |
| ISO 7617-2:2003 | Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics |
| UNE-EN 16732:2016 | Slide fasteners (zips) - Specification |
| ISO 2321:2017 | Rubber threads — Methods of test |
| NF EN ISO 3175-1 : 2010 | TEXTILES - PROFESSIONAL CARE, DRYCLEANING AND WETCLEANING OF FABRICS AND GARMENTS - PART 1: ASSESSMENT OF PERFORMANCE AFTER CLEANING AND FINISHING |
| BIS IS/ISO 105-A01 : 1994 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING |
| BIS IS/ISO 105-E13 : 1994 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E13: COLOUR FASTNESS TO ACID-FELTING: SEVERE |
| UNI ISO 2135 : 2011 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT |
| NF EN ISO 105 C08 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW-TEMPERATURE BLEACH ACTIVATOR |
| I.S. EN 15619:2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| UNE-EN 16436-1:2014 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| EN ISO 20701:2018 | Leather - Tests for colour fastness - Colour fastness to saliva (ISO 20701:2017) |
| EN ISO 105-C09:2003/A1:2007 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C09: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING - OXIDATIVE BLEACH RESPONSE USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR |
| EN 1269:2015 | Textile floor coverings - Assessment of impregnations in needled floor coverings by means of a soiling test |
| I.S. EN ISO 17700:2005 | FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING |
| BS EN ISO 12947-4 : 1999 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE |
| I.S. EN ISO 787-15:1996 | GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 15: COMPARISON OF RESISTANCE TO LIGHT OF COLOURED PIGMENTS OF SIMILAR TYPES |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| EN ISO 11378-2:2001/A1:2017 | Textile floor coverings - Laboratory soiling tests - Part 2: Drum test - Amendment 1 (ISO 11378-2:2001/Amd 1:2017) |
| BS EN 13120 : 2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN ISO 105-B06 E : 2004 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B06: COLOUR FASTNESS AND AGEING TO ARTIFICIAL LIGHT AT HIGH TEMPERATURES: XENON ARC FADING LAMP TEST |
| DIN EN 13567:2007-09 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13138-1:2015-02 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
| DIN EN 15330-2:2015-09 (Draft) | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES |
| DIN EN ISO 105-C08 E : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW-TEMPERATURE BLEACH ACTIVATOR |
| DIN EN 13561:2015-08 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 13138-3:2015-02 | Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn |
| DIN EN ISO 5470-1:2015-04 (Draft) | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| DIN EN 13558:2003-12 | SPECIFICATIONS FOR IMPACT MODIFIED EXTRUDED ACRYLIC SHEETS FOR SHOWER TRAYS FOR DOMESTIC PURPOSES |
| DIN EN ISO 19954 E : 2003 | FOOTWEAR - TEST METHODS FOR WHOLE SHOE - WASHABILITY IN A DOMESTIC WASHING MACHINE |
| DIN EN ISO 12947-3:2007-04 | Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998 + Cor. 1:2002) (includes Corrigendum AC:2006) |
| DIN EN ISO 105-C09 E : 2007 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C09: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING - OXIDATIVE BLEACH RESPONSE USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR |
| UNE-EN ISO 105-E03:2010 | Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010) |
| UNE-EN 12200-1:2017 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| BS EN ISO 105-E08:1997 | Textiles. Tests for colour fastness Colour fastness to hot water |
| BS EN 13559:2003 | Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes |
| BS EN ISO 105-N02:1995 | Textiles. Tests for colour fastness Colour fastness to bleaching: Peroxide |
| BS EN ISO 105-S01:1996 | Textiles. Tests for colour fastness Colour fastness to vulcanization. Hot air |
| UNE-EN ISO 105-G01:2017 | Textiles - Tests for colour fastness - Part G01: Colour fastness to nitrogen oxides (ISO 105-G01:2016) |
| BS EN ISO 105-X13:1997 | Textiles. Tests for colour fastness Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting |
| UNE-EN 13138-1:2015 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
| BS EN ISO 105-G03:1997 | Textiles. Tests for colour fastness Colour fastness to ozone in the atmosphere |
| BS EN ISO 105-B06:2004 | Textiles. Tests for colour fastness Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test |
| BS EN ISO 105-E02:2013 | Textiles. Tests for colour fastness Colour fastness to sea water |
| BS EN ISO 5674:2009 | Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria |
| UNE-EN ISO 30023:2012 | Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2010) |
| BS EN ISO 105-C10:2007 | Textiles. Tests for colour fastness Colour fastness to washing with soap or soap and soda |
| ISO 105-E01:2013 | Textiles — Tests for colour fastness — Part E01: Colour fastness to water |
| ISO 12947-3:1998 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 3: Determination of mass loss |
| BS EN 15330-2:2017 | Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for needle-punched surfaces for tennis and multi-sport surfaces |
| BS EN ISO 105-D02:1996 | Textiles. Tests for colour fastness Colour fastness to rubbing: Organic solvents |
| UNE-EN ISO 105-B01:2014 | Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight (ISO 105-B01:2014) |
| ISO 12402-7:2006 | Personal flotation devices Part 7: Materials and components Safety requirements and test methods |
| BS EN ISO 105-C06:2010 | Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering |
| BS EN ISO 11758:1997 | Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance |
| BS EN 20105-C04:1993 | Textiles. Tests for colour fastness Colour fastness to washing: Test 4 |
| BS EN ISO 105-P01:1995 | Textiles. Tests for colour fastness Colour fastness to dry heat (excluding pressing) |
| UNE-EN ISO 105-E04:2013 | Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013) |
| ISO 105-N01:1993 | Textiles Tests for colour fastness Part N01: Colour fastness to bleaching: Hypochlorite |
| BS EN ISO 105-X05:1997 | Textiles. Tests for colour fastness Colour fastness to organic solvents |
| BS EN ISO 105-E04:2013 | Textiles. Tests for colour fastness Colour fastness to perspiration |
| DIN EN 15200:2007-08 | SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS |
| BS EN ISO 5774:2016 | Plastics hoses. Textile-reinforced types for compressed-air applications. Specification |
| BS EN 14465:2003 | Textiles. Upholstery fabrics. Specification and methods of test |
| BS EN ISO 105-X04:1997 | Textiles. Tests for colour fastness Colour fastness to mercerizing |
| UNE-EN ISO 105-D02:2016 | Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents (ISO 105-D02:2016) |
| ISO 105-D01:2010 | Textiles Tests for colour fastness Part D01: Colour fastness to drycleaning using perchloroethylene solvent |
| BS EN ISO 105-S03:1996 | Textiles. Tests for colour fastness Colour fastness to vulcanization. Open steam |
| ISO 26082:2007 | Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather |
| BS EN ISO 105-B04:1997 | Textiles. Tests for colour fastness Colour fastness to artificial weathering. Xenon arc fading lamp test |
| BS EN ISO 105-E14:1997 | Textiles. Tests for colour fastness Colour fastness to acid-felting. Mild |
| BS EN 20105-C01:1993 | Textiles. Tests for colour fastness Colour fastness to washing: Test 1 |
| BS EN ISO 105-B08 : 1999 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7 |
| I.S. EN 1269:2015 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST |
| I.S. EN 15330-1:2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| EN 12877-2:1999 | Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding |
| CEN/TS 16641:2014 | Textile floor coverings - Guidelines for acceptable colour deviations |
| I.S. EN ISO 105-D02:2016 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART D02: COLOUR FASTNESS TO RUBBING: ORGANIC SOLVENTS (ISO 105-D02:2016) |
| DIN EN ISO 105-C08:2010-08 | Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator (ISO 105-C08:2010) |
| DIN EN 14120:2007-09 | PROTECTIVE CLOTHING - WRIST, PALM, KNEE AND ELBOW PROTECTORS FOR USERS OF ROLLER SPORTS EQUIPMENT - REQUIREMENTS AND TEST METHODS |
| EN 13558:2003 | Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes |
| DIN EN ISO 105-C09:2007-10 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C09: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING - OXIDATIVE BLEACH RESPONSE USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR |
| EN ISO 5674:2009 | Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) |
| EN 13561:2015/AC:2016 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN ISO 105-C06:2010-08 | Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010) |
| EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| EN ISO 16871:2003 | Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003) |
| DIN EN ISO 105-E16:2007-09 | Textiles - Tests for colour fastness - Part E16: Colour fastness to water spotting on upholstery fabrics (ISO 105-E16:2006) |
| UNI EN 13138-3 : 2015 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
| EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| EN 13546:2002+A1:2007 | Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods |
| UNI EN ISO 30023 : 2012 | TEXTILES - QUALIFICATION SYMBOLS FOR LABELLING WORKWEAR TO BE INDUSTRIALLY LAUNDERED |
| DIN EN 15115:2007-03 | Textile floor coverings - Determination of sensitivity to spilled water |
| EN 14906:2012 | Leather - Leather for automotive - Test methods and testing parameters |
| DIN EN ISO 105-E09:2010-08 | Textiles - Tests for colour fastness - Part E09: Colour fastness to potting (ISO 105-E09:2010) |
| DIN EN ISO 105-P02:2005-03 | Textiles - Tests for colour fastness - Part P02: Colour fastness to pleating: Steam pleating (ISO 105-P02:2002) |
| DIN EN ISO 105-E06:2006-10 | Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali |
| EN ISO 17700:2005 | Footwear - Test methods for uppers, linings and insocks - Colour fastness to rubbing (ISO 17700:2004) |
| EN 13516:2001/AC:2003 | FOOTWEAR - TEST METHODS FOR UPPERS, LINING AND INSOCKS - COLOUR FASTNESS TO RUBBING |
| DIN EN ISO 5470-1:2017-04 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| EN 1056 : 1996 | METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING |
| EN 13245-3:2010 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| EN 13567:2002+A1:2007 | Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods |
| ONORM EN 13200-4 : 2006 | SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS |
| I.S. EN 13200-4:2006 | SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS |
| BS EN ISO 11640:2012 | Leather. Tests for colour fastness. Colour fastness to cycles of to-and-fro rubbing |
| 09/30194987 DC : 0 | BS EN ISO 105-E07 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING BY WATER |
| 12/30276397 DC : 0 | BS ISO/IEC 18745-1 - TEST METHODS FOR MACHINE READABLE TRAVEL DOCUMENTS (MRTD) - PART 1: PHYSICAL TEST METHODS FOR PASSPORT BOOKS (DURABILITY) |
| I.S. EN ISO 105-EO8:1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E08: COLOUR FASTNESS TO HOT WATER |
| 05/30137367 DC : DRAFT JUL 2005 | ISO 2321 - RUBBER THREADS - METHOD OF TEST |
| 11/30241848 DC : 0 | BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| ISO 3934:2002 | Rubber, vulcanized and thermoplastic Preformed gaskets used in buildings Classification, specifications and test methods |
| 14/30292311 DC : 0 | BS EN ISO 105-G01 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART G01: COLOUR FASTNESS TO NITROGEN OXIDES |
| 10/30229904 DC : 0 | BS EN ISO 26082-1 - LEATHER - PHYSICAL AND MECHANICAL TESTS METHOD FOR DETERMINATION OF SOILING - PART 1: RUBBING (MARTINDALE) METHOD |
| UNE-EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| 07/30161895 DC : 0 | BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| 09/30194996 DC : 0 | BS EN ISO 105-E03 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER) |
| I.S. EN 14327:2004 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF ABRASION RESISTANCE OF AUTOMOTIVE LEATHER |
| DIN EN ISO 105-B02 E : 2014 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST (ISO 105-B02:2014) |
| BS 7825-3.5:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Optical and weathering properties |
| BS ISO 4665:2016 | Rubber, vulcanized or thermoplastic. Resistance to weathering |
| BS EN ISO 105-A11:2012 | Textiles. Tests for colour fastness Determination of colour fastness grades by digital imaging techniques |
| 14/30302452 DC : 0 | BS EN 13561 - EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| BS EN 14906:2012 | Leather. Leather for automotive. Test methods and testing parameters |
| 12/30254411 DC : 0 | BS EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
| BS EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods |
| BS 2782-5.550B(1996) : 1996 AMD 9494 | |
| DIN EN 12608-1 E : 2016 | UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES |
| BS ISO 105-G04:2016 | Textiles. Tests for colour fastness Colour fastness to nitrogen oxides in the atmosphere at high humidities |
| 15/30326242 DC : 0 | BS EN 15330-2 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES |
| BS EN ISO 17701:2016 | Footwear. Test methods for uppers, lining and insocks. Colour migration |
| 12/30256977 DC : 0 | BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| DIN EN 124-6:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| BS EN 12608-1:2016 | Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods Non-coated PVC-U profiles with light coloured surfaces |
| 08/30193639 DC : 0 | BS EN ISO 105-C06 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING |
| BS EN ISO 105-B07:2009 | Textiles. Tests for colour fastness Colour fastness to light of textiles wetted with artificial perspiration |
| 14/30283961 DC : 0 | BS ISO 18168 - TEXTILE FLOOR COVERINGS - COLOUR FASTNESS TO SHAMPOOING |
| BS EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| BS ISO 2135:2017 | Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
| 08/30179029 DC : DRAFT MAR 2008 | BS EN ISO 3758 - TEXTILES - CARE LABELLING CODE USING SYMBOLS |
| 17/30361211 DC : 0 | BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| 03/103003 DC : DRAFT FEB 2003 | ISO 105-C12 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART C12: COLOUR FASTNESS TO INDUSTRIAL LAUNDERING |
| 09/30196481 DC : 0 | BS ISO 105-B02 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST |
| UNI EN ISO 26082 : 2008 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF SOILING WITH RUBBING FOR AUTOMOTIVE LEATHER |
| BS ISO 19712-2 : 2007 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| NF ISO 105-F06 : 2016 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART F06: SPECIFICATION FOR SILK ADJACENT FABRIC |
| BS EN ISO 20471 : 2013 | HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013) |
| 14/30256340 DC : 0 | BS EN ISO 12947-2 - TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 2: DETERMINATION OF SPECIMEN BREAKDOWN |
| ISO 105-F01:2001 | Textiles — Tests for colour fastness — Part F01: Specification for wool adjacent fabric |
| 06/30147348 DC : DRAFT MAR 2006 | ISO 19712-3 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| 06/30160006 DC : 0 | BS EN ISO 11644 - LEATHER - TEST FOR ADHESION OF FINISH |
| I.S. EN ISO 105-G02:1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART G02: COLOUR FASTNESS TO BURNT-GAS FUMES |
| DIN EN 13245-3 E : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| BS ISO 7617-1:2001 | Plastics-coated fabrics for upholstery Specification for PVC-coated knitted fabrics |
| 16/30324261 DC : 0 | BS EN ISO 20701 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO SALIVA |
| 08/30181781 DC : DRAFT JULY 2008 | BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| I.S. EN 16732:2015 | SLIDE FASTENERS (ZIPS) - SPECIFICATION |
| 08/30181778 DC : DRAFT JULY 2008 | BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| IS 14452 : 2014 | TEXTILES - CARE LABELLING CODE USING SYMBOLS |
| ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| DIN EN ISO 9405 E : 2017 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE (ISO 9405:2015) |
| UNI CEN/TS 16641 : 2014 | TEXTILE FLOOR COVERINGS - GUIDELINES FOR ACCEPTABLE COLOUR DEVIATIONS |
| I.S. EN ISO 12870:2014 | OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS (ISO 12870:2016) |
| UNE-EN ISO 105-B10:2012 | Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011) |
| ISO 26082-1:2012 | Leather Physical and mechanical test methods for the determination of soiling Part 1: Rubbing (Martindale) method |
| I.S. EN 16436-1:2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| ISO 105-F09:2009 | Textiles Tests for colour fastness Part F09: Specification for cotton rubbing cloth |
| BIS IS 12673-3 : 2014 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 3: DETERMINATION OF MASS LOSS |
| BIS IS/ISO 105-E01 : 2010 | TEXTILES - TESTS FOR COLOUR FATNESS - PART E01: COLOUR FASTNESS TO WATER |
| UNE-EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| UNE-EN ISO 105-A11:2013 | Textiles - Tests for colour fastness - Part A11: Determination of colour fasness grades by digital imaging techniques (ISO 105-A11:2012) |
| ISO 18168:2015 | Textile floor coverings Colour fastness to shampooing |
| DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| PREN 15330-1 : DRAFT 2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| UNE-EN ISO 3175-1:2010 | Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2010) |
| PREN 513 : DRAFT 2017 | PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| UNI EN ISO 11640 : 2013 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING |
| NFP 28 004 : 95 XP | CURTAIN-WALLING - PERFORMANCE REQUIREMENTS OF THE FINISHED WORK |
| UNI EN ISO 19712-3 : 2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| EN ISO 30023:2012 | Textiles - Qualification symbols for labelling workwear to be industrially laundered (ISO 30023:2010) |
| EN ISO 105-G02:1997/AC:2009 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART G02: COLOUR FASTNESS TO BURNT-GAS FUMES |
| UNI EN ISO 12870 : 2015 | OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS |
| EN ISO 105-A01:2010 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
| NF EN ISO 5912 : 2011 | CAMPING TENTS |
| EN ISO 105-E01:2013 | Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013) |
| DIN EN 13200-4:2006-12 | Spectator facilities - Part 4: Seats - Product characteristics |
| DIN EN ISO 105-P02 E : 2005 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART P02: COLOUR FASTNESS TO PLEATING: STEAM PLEATING |
| DIN EN ISO 105-B02:2014-11 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST (ISO 105-B02:2014) |
| DIN EN ISO 105-B01:2014-12 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B01: COLOUR FASTNESS TO LIGHT: DAYLIGHT (ISO 105-B01:2014) |
| DIN EN ISO 105-B06:2004-07 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B06: COLOUR FASTNESS AND AGEING TO ARTIFICIAL LIGHT AT HIGH TEMPERATURES: XENON ARC FADING LAMP TEST |
| DIN EN ISO 5674:2009-06 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE-OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA |
| DIN EN 15115 E : 2007 | TEXTILE FLOOR COVERINGS - DETERMINATION OF SENSITIVITY TO SPILLED WATER |
| DIN EN ISO 105-D01 E : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART D01: COLOUR FASTNESS TO DRY CLEANING USING PERCHLOROETHYLENE SOLVENT |
| DIN EN 14565:2004-09 | RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION |
| DIN EN ISO 11378-2:2003-02 | TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST (ISO 11378-2:2001 + AMD 1:2017) |
| ISO 105-X04:1994 | Textiles Tests for colour fastness Part X04: Colour fastness to mercerizing |
| BS EN ISO 12402-7 : 2007 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN ISO 105-E10:1997 | Textiles. Tests for colour fastness Colour fastness to decatizing |
| ISO 105-P01:1993 | Textiles Tests for colour fastness Part P01: Colour fastness to dry heat (excluding pressing) |
| ISO 105-Z01:1993 | Textiles Tests for colour fastness Part Z01: Colour fastness to metals in the dye-bath: Chromium salts |
| BS EN 471 : 2003 | HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
| UNE-EN ISO 17228:2015 | Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO 17228:2015) |
| BS EN ISO 105-C08:2010 | Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator |
| BS EN 20105-C05:1993 | Textiles. Tests for colour fastness Colour fastness to washing: Test 5 |
| UNE-EN ISO 12947-2:2017 | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016) |
| BS EN ISO 105-B02:2014 | Textiles. Tests for colour fastness Colour fastness to artificial light: Xenon arc fading lamp test |
| BS EN 13138-1:2008 | Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be worn |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| ISO 105-N03:1993 | Textiles Tests for colour fastness Part N03: Colour fastness to bleaching: Sodium chlorite (mild) |
| UNE-EN ISO 105-E01:2013 | Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013) |
| BS EN ISO 5912:2011 | Camping tents |
| BS EN ISO 105-A01:2010 | Textiles. Tests for colour fastness General principles of testing |
| BS EN 13567 : 2002 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS |
| ISO 105-Z02:1993 | Textiles Tests for colour fastness Part Z02: Colour fastness to metals in the dye-bath: Iron and copper |
| UNE-EN ISO 11641:2013 | Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012) |
| DIN EN 15187 E : 2006 | FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE |
| I.S. EN 13138-1:2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
| I.S. EN 13138-2:2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
| I.S. EN ISO 105-C08:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW-TEMPERATURE BLEACH ACTIVATOR |
| I.S. EN 14877:2013 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION |
| I.S. EN 263:2008 | SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES |
| I.S. EN ISO 5470-1:2016 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| I.S. EN ISO 105-C06:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING |
| I.S. EN ISO 15027-1:2012 | IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY (ISO 15027-1:2012) |
| I.S. EN 13245-1:2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| I.S. EN ISO 11643:2009 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS OF SMALL SAMPLES TO SOLVENTS |
| I.S. EN ISO 105-E02:2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER (ISO 105-E02:2013) |
| I.S. EN 15330-2:2017 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES |
| I.S. EN ISO 5774:2016 | PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016) |
| I.S. EN ISO 105-B01:2014 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B01: COLOUR FASTNESS TO LIGHT: DAYLIGHT (ISO 105-B01:2014) |
| I.S. EN 607:2004 | EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING |
| I.S. EN ISO 105-E01:2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER (ISO 105-E01:2013) |
| I.S. EN 13546:2002 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, FOOT AND GENITAL PROTECTORS FOR FIELD HOCKEY GOAL KEEPERS, AND SHIN PROTECTORS FOR FIELD PLAYERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 15027-2:2012 | IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY (ISO 15027-2:2012) |
| I.S. EN ISO 11641:2012 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO PERSPIRATION (ISO 11641:2012) |
| I.S. EN ISO 12947-2:2016 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 2: DETERMINATION OF SPECIMEN BREAKDOWN (ISO 12947-2:2016) |
| I.S. EN ISO 14113:2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| I.S. EN ISO 105-A01:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING |
| I.S. EN ISO 105-E09:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING |
| I.S. EN ISO 105-E12:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING |
| I.S. EN 12200-1:2016 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN 13138-3:2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
| I.S. EN ISO 3758:2012 | TEXTILES - CARE LABELLING CODE USING SYMBOLS (ISO 3758:2012) |
| I.S. EN ISO 11642:2012 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER (ISO 11642:2012) |
| I.S. EN 13567:2002 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14120:2003 | PROTECTIVE CLOTHING - WRIST, PALM, KNEE AND ELBOW PROTECTORS FOR USERS OF ROLLER SPORTS EQUIPMENT - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 5674:2009 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE-OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA |
| I.S. EN ISO 11644:2009 | LEATHER - TEST FOR ADHESION OF FINISH |
| I.S. EN ISO 105-E04:2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION (ISO 105-E04:2013) |
| DIN EN ISO 26082:2008-03 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF SOILING WITH RUBBING FOR AUTOMOTIVE LEATHER |
| I.S. EN ISO 105-B02:2014 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST (ISO 105-B02:2014) |
| I.S. EN 13120:2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| UNI EN ISO 12402-7 : 2011 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 105-E07:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER |
| I.S. EN 13561:2015 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| I.S. EN ISO 105-G01:2016 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART G01: COLOUR FASTNESS TO NITROGEN OXIDES (ISO 105-G01:2016) |
| DIN EN ISO 105-E04:2013-08 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION (ISO 105-E04:2013) |
| DIN EN 1269:2016-02 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST |
| I.S. EN ISO 105-E06:2006 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E06: COLOUR FASTNESS TO SPOTTING: ALKALI |
| I.S. EN ISO 105-E05:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING: ACID |
| BS 2782-5:Method 552A:1999 | Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources |
| BS 903-A33:1985 | Physical testing of rubber Methods of test for staining in contact with organic materials |
| BS 903-A33(1998) : 1998 | PHYSICAL TESTING OF RUBBER - RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL |
| ONORM EN ISO 11644 : 2009 | LEATHER - TEST FOR ADHESION OF FINISH |
| CEI EN 62329-2 : 2007 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| DIN EN 15836-1:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| PREN 15330-2 : DRAFT 2015 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTISPORT SURFACES |
| UNI EN ISO 17076-1 : 2012 | LEATHER - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER METHOD |
| BS ISO 105-F07:2001 | Textiles. Tests for colour fastness Specification for secondary acetate adjacent fabric |
| I.S. EN ISO 20471:2013 | HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013, CORRECTED VERSION 2013-06-01) |
| NF EN ISO 105 A01 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING |
| BS ISO 105-A08:2001 | Textiles. Tests for colour fastness Vocabulary used in colour measurement |
| I.S. EN ISO 25649-1:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017) |
| 04/30113782 DC : DRAFT MAY 2004 | ISO 3865 - RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL |
| I.S. EN ISO 16871:2003 | PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING |
| BIS IS/ISO 105-E12 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING |
| 10/30175254 DC : 0 | BS ISO 5912 - CAMPING TENTS |
| PREN 13138-3 : DRAFT 2012 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 3: SAFETY REQUIREMENTS AND TEST METHODS FOR SWIM SEATS TO BE WORN |
| DIN EN 16436-1:2016-04 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| 13/30262917 DC : 0 | BS EN 15330-1 - SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| 15/30313584 DC : 0 | BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| BS ISO 27668-1:2017 | Gel ink ball pens and refills General use |
| BS ISO 20712-2:2007 | Water safety signs and beach safety flags Specifications for beach safety flags. Colour, shape, meaning and performance |
| DIN ISO 5912 E : 2004 | CAMPING TENTS |
| BS ISO 27668-2:2009 | Gel ink ball pens and refills Documentary use (DOC) |
| 13/30262920 DC : 0 | BS EN 14877 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATIONS |
| 05/30132908 DC : DRAFT APR 2005 | EN 15200 - SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS |
| ISO 7617-1:2001 | Plastics-coated fabrics for upholstery Part 1: Specification for PVC-coated knitted fabrics |
| BS ISO 2321:2017 | Rubber threads. Methods of test |
| BIS IS/ISO 105-E16 : 2006 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E16: COLOUR FASTNESS TO WATER SPOTTING ON UPHOLSTERY FABRICS |
| ESPECIFICACION UNE 0059:2017 | Fiberglass reinforced polyester poles for overhead power distribution lines and telephony lines |
| UNE-EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| 08/30176905 DC : DRAFT JAN 2008 | BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| BS EN ISO 9405:2017 | Textile floor coverings. Assessment of changes in appearance |
| DIN EN ISO 105-B07 E : 2009 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B07: COLOUR FASTNESS TO LIGHT OF TEXTILES WETTED WITH ARTIFICIAL PERSPIRATION |
| 17/30332159 DC : 0 | BS ISO 20739 - MARTIAL ARTS - WUSHU TAIJI CLOTHING - REQUIREMENTS AND TEST METHOD |
| 08/30194094 DC : 0 | BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| 15/30315522 DC : 0 | BS ISO 4586-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| 06/30158081 DC : 0 | BS EN ISO 105-E04 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION |
| BIS IS/ISO 105-F03 : 2001 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART F03: SPECIFICATION FOR POLYAMIDE ADJACENT FABRIC |
| 09/30202125 DC : 0 | BS ISO 105-E02 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER |
| DIN EN ISO 105-B01 E : 2014 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B01: COLOUR FASTNESS TO LIGHT: DAYLIGHT (ISO 105-B01:2014) |
| 09/30195823 DC : 0 | BS ISO 2135 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT- FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT |
| 09/30194984 DC : 0 | BS EN ISO 105-E01 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER |
| DIN EN ISO 30013:2012-03 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| BS EN 15649-1 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| ISO 105-B03:2017 | Textiles — Tests for colour fastness — Part B03: Colour fastness to weathering: Outdoor exposure |
| UNE-EN ISO 17701:2016 | Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016) |
| 02/123737 DC : DRAFT OCT 2002 | EN 1307 - TEXTILE FLOOR COVERINGS - CLASSIFICATION OF PILE CARPETS |
| DIN EN 124-6 E : 2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| 02/121747 DC : DRAFT APR 2002 | PREN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| 06/30137509 DC : DRAFT MAR 2006 | ISO 19712-2 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| ISO 12040:1997 | Graphic technology Prints and printing inks Assessment of light fastness using filtered xenon arc light |
| UNE-EN ISO 9405:2017 | Textile floor coverings - Assessment of changes in appearance (ISO 9405:2015) |
| 05/30128631 DC : DRAFT FEB 2005 | EN ISO 105-E06 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E06 - COLOUR FASTNESS TO SPOTTING - ALKALI |
| 09/30194990 DC : 0 | BS EN ISO 105-E09 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING |
| BS ISO 30023 : 2010 | TEXTILES - QUALIFICATION SYMBOLS FOR LABELLING WORKWEAR TO BE INDUSTRIALLY LAUNDERED |
| 06/30156625 DC : DRAFT OCT 2006 | BS EN ISO 105-B10 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON - ARC RADIATION |
| 05/30128222 DC : DRAFT JAN 2005 | ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
| DIN EN 16436-1 E : 2016 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| BS EN 60684-2:2011 | Flexible insulating sleeving Methods of test |
| BS EN 20105-C06:1993 | Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering |
| UNE-EN 12608-1:2016 | Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces |
| BS EN ISO 26082-1:2012 | Leather. Physical and mechanical test methods for the determination of soiling Rubbing (Martindale) method |
| UNE-EN 15649-1:2010 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| ISO 14145-2:1998 | Roller ball pens and refills Part 2: Documentary use (DOC) |
| I.S. EN ISO 26082-2:2012 | LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 2: TUMBLING METHOD (ISO 26082-2:2012) |
| I.S. EN ISO 30013:2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011) |
| UNI EN ISO 26082-2 : 2012 | LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 2: TUMBLING METHOD |
| I.S. EN ISO 9405:2017 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE (ISO 9405:2015) |
| ISO 105-F05:2001 | Textiles — Tests for colour fastness — Part F05: Specification for acrylic adjacent fabric |
| CGSB 4.2-29.1 : M89(R1997) | TEXTILE TEST METHODS - COLOURFASTNESS TO DRY CLEANING SOLVENT |
| EN ISO 3175-1:2018 | Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2017) |
| I.S. EN ISO 105-B03:2017 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B03: COLOUR FASTNESS TO WEATHERING: OUTDOOR EXPOSURE (ISO 105-B03:2017) |
| I.S. EN 124-6:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| BIS IS/ISO 105-F04 : 2001 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART F04: SPECIFICATION FOR POLYESTER ADJACENT FABRIC |
| DIN EN ISO 12870:2015-07 (Draft) | OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS (ISO 12870:2012) |
| BS EN ISO 12870:2014 | Ophthalmic optics. Spectacle frames. Requirements and test methods |
| ISO/IEC 18745-1:2014 | Information technology Test methods for machine readable travel documents (MRTD) and associated devices Part 1: Physical test methods for passport books (durability) |
| I.S. EN 13245-3:2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| I.S. EN 15836-1:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| 17/30359853 DC : 0 | BS EN 17142 - MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| SAE J 2642 : 2017 | RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS |
| ISO 105-G04:2016 | Textiles Tests for colour fastness Part G04: Colour fastness to nitrogen oxides in the atmosphere at high humidities |
| PREN 1471 : DRAFT 2014 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE |
| ASTM D 6322 : 2015 : REDLINE | Standard Guide to International Test Methods Associated with Textile Care Procedures |
| UNI EN 13245-3 : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| SAE J 322 : 2014 | NONMETALLIC TRIM MATERIALS - TEST METHOD FOR DETERMINING THE STAINING RESISTANCE TO HYDROGEN SULFIDE GAS |
| EN ISO 11640:2012 | Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012) |
| UNI ISO 3865 : 2010 | RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL |
| UNI EN 14906 : 2012 | LEATHER - LEATHER FOR AUTOMOTIVE - TEST METHODS AND TESTING PARAMETERS |
| DIN EN ISO 20471:2013-09 | HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013, CORRECTED VERSION 2013-06-01 + AMD 1:2016) |
| DIN EN ISO 17700:2005-12 | FOOTWEAR - TEST METHODS FOR UPPERS, LININGS AND INSOCKS - COLOUR FASTNESS TO RUBBING |
| UNE-EN ISO 11640:2013 | Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012) |
| ISO 105-F07:2001 | Textiles — Tests for colour fastness — Part F07: Specification for secondary acetate adjacent fabric |
| ISO 105-F04:2001 | Textiles — Tests for colour fastness — Part F04: Specification for polyester adjacent fabric |
| ISO 27668-1:2017 | Gel ink ball pens and refills — Part 1: General use |
| BS EN 1269 : 1997 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF IMPREGNATIONS IN NEEDLED FLOOR COVERINGS BY MEANS OF A SOILING TEST |
| ISO 3175-1:2017 | Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 1: Assessment of performance after cleaning and finishing |
| ISO 11643:2009 | Leather Tests for colour fastness Colour fastness of small samples to solvents |
| ISO 105-F03:2001 | Textiles — Tests for colour fastness — Part F03: Specification for polyamide adjacent fabric |
| DIN EN 13120:2014-09 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 471:2008-03 | HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
| DIN EN ISO 14113:2014-02 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| DIN EN 14565 E : 2004 | RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION |
| DIN EN ISO 105-E05 E : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING: ACID |
| DIN EN ISO 105-E12 E : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING |
| DIN EN ISO 105-E06 E : 2006 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E06: COLOUR FASTNESS TO SPOTTING: ALKALI (ISO 105-E06:2006) |
| DIN EN ISO 3758:2013-12 | Textiles - Care labelling code using symbols (ISO 3758:2012) |
| DIN EN 14877 E : 2013 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION |
| EN 13138-3:2014 | Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn |
| BS EN 20105-N01:1995 | Textiles. Tests for colour fastness Colour fastness to bleaching: hypochlorite |
| UNE-EN ISO 15027-1:2013 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
| UNE-EN ISO 105-E02:2013 | Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013) |
| BS EN 12877-4:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by two-roll milling |
| ISO 105-S03:1993 | Textiles Tests for colour fastness Part S03: Colour fastness to vulcanization: Open steam |
| UNE-EN ISO 105-E07:2010 | Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010) |
| IEC 62329-2:2006 | Heat-shrinkable moulded shapes - Part 2: Methods of test |
| BS EN ISO 105-N04:1995 | Textiles. Tests for colour fastness Colour fastness to bleaching: Sodium chlorite (severe) |
| ISO 105-B07:2009 | Textiles Tests for colour fastness Part B07: Colour fastness to light of textiles wetted with artificial perspiration |
| ISO 105-N05:1993 | Textiles Tests for colour fastness Part N05: Colour fastness to stoving |
| BS EN ISO 105-X06:1997 | Textiles. Tests for colour fastness Colour fastness to soda boiling |
| BS EN ISO 3758:2012 | Textiles. Care labelling code using symbols |
| BS EN ISO 105-N05:1995 | Textiles. Tests for colour fastness Colour fastness to stoving |
| ISO 105-E04:2013 | Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration |
| UNE-EN ISO 105-E12:2010 | Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010) |
| BS EN ISO 105-C12:2006 | Textiles. Tests for colour fastness Colour fastness to industrial laundering |
| BS EN 12608:2003 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods |
| BS EN 1471:1997 | Textile floor coverings. Assessment of changes in appearance |
| ISO 105-C12:2004 | Textiles - Tests for colour fastness — Part C12: Colour fastness to industrial laundering |
| ISO 15702:1998 | Leather — Tests for colour fastness — Colour fastness to machine washing |
| BS EN ISO 105-E05:2010 | Textiles. Tests for colour fastness Colour fastness to spotting. Acid |
| ISO 105-E07:2010 | Textiles Tests for colour fastness Part E07: Colour fastness to spotting: Water |
| ISO 877:1994 | Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
| ISO 5912:2011 | Camping tents |
| BS EN ISO 105-E13:1997 | Textiles. Tests for colour fastness Colour fastness to acid-felting. Severe |
| BS EN ISO 105-D01:2010 | Textiles. Tests for colour fastness Colour fastness to dry cleaning using perchloroethylene solvent |
| DIN EN 14877:2013-12 | Synthetic surfaces for outdoor sports areas - Specification |
| UNE-EN 13138-2:2015 | Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held |
| ISO 105-B05:1993 | Textiles Tests for colour fastness Part B05: Detection and assessment of photochromism |
| I.S. EN ISO 12402-7:2006 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| EN 12608-1 : 2016 | UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES |
| EN ISO 105-B06 : 2004 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B06: COLOUR FASTNESS AND AGEING TO ARTIFICIAL LIGHT AT HIGH TEMPERATURES: XENON ARC FADING LAMP TEST |
| EN ISO 12402-7:2006/A1:2011 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| EN ISO 12947-3:1998/AC:2006 | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss (ISO 12947-3:1998/Cor.1:2002) |
| EN 20105-C05 : 1992 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WASHING - TEST 5 |
| EN ISO 105-E10 : 1996 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E10: COLOUR FASTNESS TO DECATIZING |
| EN ISO 26082:2007 | Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather (ISO 26082:2007) |
| EN 20105-C03 : 1992 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WASHING - TEST 3 |
| EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| UNI EN 15187 : 2007 | FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE |
| UNI EN ISO 105-D01 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART D01: COLOUR FASTNESS TO DRY CLEANING USING PERCHLOROETHYLENE SOLVENT |
| UNI EN 15330-1 : 2013 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| UNI EN ISO 15027-1 : 2012 | IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY |
| UNI EN ISO 105-E01 : 2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER |
| UNI EN ISO 105-E05 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING: ACID |
| UNI EN 471 : 2008 | HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
| UNI EN ISO 105-E02 : 2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER |
| UNI EN ISO 105-B02 : 2014 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST |
| UNI EN 13245-1 : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| UNI EN ISO 11644 : 2009 | LEATHER - TEST FOR ADHESION OF FINISH |
| UNI EN ISO 11642 : 2013 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER |
| BS 5790-1:1996 | Coated fabrics for upholstery Specification for PVC-coated knitted fabrics |
| UNI EN ISO 5674 : 2009 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE- OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA |
| UNI EN ISO 14113 : 2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) |
| EN ISO 19954:2003 | Footwear - Test methods for whole shoe - Washability in a domestic washing machine (ISO 19954:2003) |
| UNI EN ISO 105-C08 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW-TEMPERATURE BLEACH ACTIVATOR |
| UNI EN ISO 105-B08 : 2009 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7 |
| UNI EN ISO 105-B01 : 2014 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B01: COLOUR FASTNESS TO LIGHT: DAYLIGHT |
| UNI EN 13120 : 2014 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| UNI EN ISO 105-E03 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER) |
| UNI EN ISO 15027-2 : 2012 | IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY |
| UNI EN ISO 11641 : 2013 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO PERSPIRATION |
| UNI EN ISO 12947-3 : 2000 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - DETERMINATION OF MASS LOSS |
| UNI EN 263 : 2008 | SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES |
| UNI EN ISO 105-C06 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING |
| UNI EN ISO 105-E12 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING |
| UNI EN 14877 : 2013 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATION |
| UNI EN ISO 12947-4 : 2000 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - ASSESSMENT OF APPEARANCE CHANGE |
| UNI EN ISO 105-A01 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A01: GENERAL PRINCIPLES OF TESTING |
| UNI EN ISO 11643 : 2009 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS OF SMALL SAMPLES TO SOLVENTS |
| EN ISO 17228:2015 | LEATHER - TESTS FOR COLOUR FASTNESS - CHANGE IN COLOUR WITH ACCELERATED AGEING (ISO 17228:2015) |
| EN 607:2004 | Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| UNI EN 15619 : 2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| UNI EN ISO 105-E07 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER |
| UNI EN ISO 105-E04 : 2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION |
| UNI EN ISO 3758 : 2012 | TEXTILES - CARE LABELLING CODE USING SYMBOLS |
| UNI EN ISO 105-E09 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING |
| UNI EN 15200 : 2007 | SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS |
| UNE-EN ISO 12870:2014 | Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2012) |
| BS EN ISO 19712-2:2013 | Plastics. Decorative solid surfacing materials Determination of properties. Sheet goods |
| BS 903-A54:1989 | Physical testing of rubber Methods for exposure to artificial light, for use in determining resistance to weathering |
| BIS IS/ISO 105-E07 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER |
| BIS IS/ISO 105-E02 : 1994 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER |
| ISO 20712-2:2007 | Water safety signs and beach safety flags Part 2: Specifications for beach safety flags Colour, shape, meaning and performance |
| 14/30303794 DC : 0 | BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS ISO 17228:2005 | Leather. Tests for colour fastness. Change in colour with accelerated ageing |
| 15/30317619 DC : 0 | BS EN ISO 5470-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER |
| I.S. EN ISO 26082:2007 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF SOILING WITH RUBBING FOR AUTOMOTIVE LEATHER |
| BS ISO 105-F09:2009 | Textiles. Tests for colour fastness Specification for cotton rubbing cloth |
| BS ISO 105-F06:2000 | Textiles. Tests for colour fastness Specification for silk adjacent fabric |
| BS ISO 105-F02:2009 | Textiles. Tests for colour fastness Specification for cotton and viscose adjacent fabrics |
| I.S. EN ISO 105-BO4:1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ARTIFICIAL WEATHERING: XENON ARC FADING LAMP TEST |
| I.S. EN ISO 17076-1:2012 | LEATHER - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER METHOD (ISO 17076-1:2012) |
| UNI EN 15836-1 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| UNI EN ISO 30013 : 2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
| BS EN 20105-B02:1993 | Textiles. Tests for colour fastness Colour fastness artificial light (xenon arc fading lamp test) |
| NF EN ISO 105 E03 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER) |
| NF EN ISO 105 E05 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E05: COLOUR FASTNESS TO SPOTTING: ACID |
| UNI EN ISO 105-B10 : 2012 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| 10/30235110 DC : 0 | BS EN ISO 11641 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO PERSPIRATION |
| BS EN 15836-1:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| DIN EN ISO 9405:2016-10 (Draft) | TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE (ISO 9405:2015) |
| I.S. EN 60684-2:2011 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
| BS ISO 105-F10 : 1989 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART F10: SPECIFICATION FOR ADJACENT FABRIC: MULTIFIBRE |
| BS EN ISO 30023:2012 | Textiles. Qualification symbols for labelling workwear to be industrially laundered |
| 12/30254414 DC : 0 | BS EN 13138-2 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
| BS ISO 105-B06 : 1998 AMD 15161 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B06: COLOUR FASTNESS AND AGEING TO ARTIFICIAL LIGHT AT HIGH TEMPERATURES - XENON ARC FADING LAMP TEST |
| I.S. EN ISO 105-C10:2007 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C10: COLOUR FASTNESS TO WASHING WITH SOAP OR SOAP AND SODA |
| BS ISO 19712-3 : 2007 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| 10/30196548 DC : 0 | BS EN ISO 15027-1 - IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY |
| BS EN 13245-3:2010 | Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles |
| PREN 14877 : DRAFT 2013 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - SPECIFICATIONS |
| BS ISO 105-C09 : 2001 AMD 15184 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING. OXIDATIVE BLEACH RESPONSE USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR |
| BS EN ISO 17076-1:2012 | Leather. Determination of abrasion resistance Taber method |
| DIN EN ISO 17228:2015-06 | LEATHER - TESTS FOR COLOUR FASTNESS - CHANGE IN COLOUR WITH ACCELERATED AGEING (ISO 17228:2015) |
| NF EN ISO 105 B01 : 2014 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B01: COLOUR FASTNESS TO LIGHT: DAYLIGHT |
| 13/30272871 DC : 0 | BS ISO 9405 - TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE |
| 07/30137506 DC : 0 | BS ISO 19712-1 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 1: CLASSIFICATION AND SPECIFICATIONS |
| ISO 14145-1:2017 | Roller ball pens and refills — Part 1: General use |
| BS EN 62329-2:2006 | Heat shrinkable moulded shapes Methods of test |
| DIN EN 15649-1:2014-06 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| 09/30196680 DC : 0 | BS ISO 30023 - TEXTILES - CARE LABELLING CODE USING SYMBOLS FOR WORKWEAR TO BE INDUSTRIALLY LAUNDERED |
| BS EN 13329 : 2016 | LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| BS ISO 12040:1997 | Graphic technology. Prints and printing inks. Assessment of light fastness using filtered xenon arc light |
| 16/30296872 DC : 0 | BS ISO 10256-5 - PROTECTIVE EQUIPMENT FOR USE IN ICE HOCKEY - PART 5: NECK LACERATION PROTECTORS FOR ICE HOCKEY PLAYERS |
| 05/30136339 DC : DRAFT JUL 2005 | EN ISO 105-E16 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART E16: COLOUR FASTNESS TO WATER SPOTTING ON UPHOLSTERY FABRICS |
| 16/30333706 DC : 0 | BS ISO 2135 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT |
| BS PAS 44(2014) : 2014 | OFFICIAL IDENTIFICATION EARTAGS FOR CATTLE - SPECIFICATION |
| DIN EN ISO 20701:2016-10 (Draft) | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO SALIVA (ISO/DIS 20701:2016) |
| 08/30176450 DC : DRAFT JAN 2008 | BS EN ISO 27668-1 - GEL INK BALL PENS AND REFILLS - PART 1: GENERAL USE |
| BS ISO 18168:2015 | Textile floor coverings. Colour fastness to shampooing |
| BS EN ISO 17228:2015 | Leather. Tests for colour fastness. Change in colour with accelerated ageing |
| 14/30292296 DC : 0 | BS ISO 105-G04 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART G04: COLOUR FASTNESS TO NITRIC OXIDE IN THE ATMOSPHERE AT HIGH HUMIDITIES |
| 07/30158827 DC : 0 | BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| DIN EN ISO 105-B10:2012-01 | Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011) |
| 10/30235114 DC : 0 | BS EN ISO 11642 - LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WATER |
| 05/30131435 DC : DRAFT MAR 2005 | EN ISO 105-C10 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART C10: COLOUR FASTNESS TO WASHING WITH SOAP OR SOAP AND SODA |
| DD CEN/TS 15256:2005 | Protective clothing. Hand, arm, leg, genital and neck protectors for use in ice hockey. Protectors for players other than goalkeepers. Requirements and test methods |
| UNE-EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
| 02/123818 DC : DRAFT OCT 2002 | BS EN 14565 - RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION |
| UNI EN ISO 105-B07 : 2009 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B07: COLOUR FASTNESS TO LIGHT OF TEXTILES WETTED WITH ARTIFICIAL PERSPIRATION |
| 06/30154487 DC : 0 | EN 263 - SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES |
| BIS IS/ISO 105-E09 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING |
| BIS IS/ISO 105-F01 : 2001 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART F01: SPECIFICATION FOR WOOL ADJACENT FABRIC |
| BS ISO 3865:2005 | Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material |
| UNI EN 15649-1 : 2014 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 26082-1:2012 | LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 1: RUBBING (MARTINDALE) METHOD (ISO 26082-1:2012) |
| PREN ISO 15027-1 : DRAFT 2010 | IMMERSION SUITS - PART 1: CONSTANT WEAR SUITS, REQUIREMENTS INCLUDING SAFETY |
| EN 16436-1:2014+A1:2015 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| I.S. EN ISO 105-A08:2002 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A08: VOCABULARY USED IN COLOUR MEASUREMENT |
| I.S. EN ISO 19712-3:2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
| I.S. EN 438-2:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| NF EN ISO 105 B10 : 2011 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| ISO 2135:2017 | Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
| I.S. EN ISO 105-A11:2012 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASTNESS GRADES BY DIGITAL IMAGING TECHNIQUES |
| ISO 21924-1:2017 | Protective equipment for martial arts — Part 1: General requirements and test methods |
| BS ISO/IEC 18745-1:2014 | Information technology. Test methods for machine readable travel documents (MRTD) and associated devices Physical test methods for passport books (durability) |
| CGSB 4.2-31 : 2004(R2013) | TEXTILE TEST METHODS - TEXTILES - TESTS FOR COLOURFASTNESS - PART X11: COLOURFASTNESS TO HOT PRESSING |
| ISO 12757-2:1998 | Ball point pens and refills Part 2: Documentary use (DOC) |
| EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| I.S. EN ISO 17228:2015 | LEATHER - TESTS FOR COLOUR FASTNESS - CHANGE IN COLOUR WITH ACCELERATED AGEING (ISO 17228:2015) |
| ISO 105-F10:1989 | Textiles Tests for colour fastness Part F10: Specification for adjacent fabric: Multifibre |
| I.S. EN ISO 11640:2012 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING (ISO 11640:2012) |
| I.S. EN ISO 105-B07:2009 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B07: COLOUR FASTNESS TO LIGHT OF TEXTILES WETTED WITH ARTIFICIAL PERSPIRATION |
| ISO 17076-1:2012 | Leather Determination of abrasion resistance Part 1: Taber method |
| DIN EN ISO 105-E16 E : 2007 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E16: COLOUR FASTNESS TO WATER SPOTTING ON UPHOLSTERY FABRICS |
| DIN EN ISO 15027-2:2013-03 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
| DIN EN ISO 105-E02 E : 2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER (ISO 105-E02:2013) |
| DIN EN ISO 105-C10 E : 2007 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C10: COLOUR FASTNESS TO WASHING WITH SOAP OR SOAP AND SODA |
| DIN EN 607:2005-02 | Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| DIN EN 13546:2007-09 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, FOOT AND GENITAL PROTECTORS FOR FIELD HOCKEY GOAL KEEPERS, AND SHIN PROTECTORS FOR FIELD PLAYERS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 15027-1:2013-03 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
| DIN EN ISO 105-E03 E : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER) |
| DIN EN ISO 105-E01 E : 2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER (ISO 105-E01:2013) |
| DIN EN ISO 105-E07 E : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E07: COLOUR FASTNESS TO SPOTTING: WATER |
| BS EN 20105-C03:1993 | Textiles. Tests for colour fastness Colour fastness to washing: Test 3 |
| BS EN ISO 105-E07:2010 | Textiles. Tests for colour fastness Colour fastness to spotting. Water |
| UNE-EN ISO 105-C08:2010 | Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator (ISO 105-C08:2010) |
| BS EN ISO 105-C09:2003 | Textiles. Tests for colour fastness Colour fastness to domestic and commercial laundering. Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
| BS EN ISO 105-E06:2006 | Textiles. Tests for colour fastness Colour fastness to spotting. Alkali |
| ISO 105-S02:1993 | Textiles Tests for colour fastness Part S02: Colour fastness to vulcanization: Sulfur monochloride |
| ISO 15700:1998 | Leather — Tests for colour fastness — Colour fastness to water spotting |
| BS EN ISO 105-X02:1996 | Textiles. Tests for colour fastness Colour fastness to carbonizing: Sulfuric acid |
| BS EN 14120 : 2003 | PROTECTIVE CLOTHING - WRIST, PALM, KNEE AND ELBOW PROTECTORS FOR USERS OF ROLLER SPORTS EQUIPMENT - REQUIREMENTS AND TEST METHODS |
| ISO 105-C03:1989 | Textiles Tests for colour fastness Part C03: Colour fastness to washing: Test 3 |
| BS EN 607:2004 | Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing |
| BS EN ISO 105-C07:2001 | Textiles. Tests for colour fastness Colour fastness to wet scrubbing of pigment dyed or pigment printed textiles |
| ISO 19954:2003 | Footwear Test methods for whole shoe Washability in a domestic washing machine |
| ISO 105-Z06:1998 | Textiles Tests for colour fastness Part Z06: Evaluation of dye and pigment migration |
| ISO 105-C08:2010 | Textiles Tests for colour fastness Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator |
| ISO 105-C09:2001 | Textiles — Tests for colour fastness — Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
| EN ISO 5912:2011 | Camping tents (ISO 5912:2011) |
| BS EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics. Determination of abrasion resistance Taber abrader |
| BS EN ISO 105-E12:2010 | Textiles. Tests for colour fastness Colour fastness to milling. Alkaline milling |
| ISO 105-E06:2006 | Textiles Tests for colour fastness Part E06: Colour fastness to spotting: Alkali |
| DIN EN ISO 105-E04:2013-08 | Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013) |
| ISO 105-A11:2012 | Textiles — Tests for colour fastness — Part A11: Determination of colour fastness grades by digital imaging techniques |
| ISO 17701:2016 | Footwear Test methods for uppers, lining and insocks Colour migration |
| BS EN 13558:2003 | Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes |
| BS EN 13138-2:2014 | Buoyant aids for swimming instruction Safety requirements and test methods for buoyant aids to be held |
| BS EN 263:2008 | Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
| UNE-EN 13138-3:2015 | Buoyant aids for swimming instruction - Part 3: Safety requirements and test methods for swim seats to be worn |
| BS EN ISO 105-S02:1996 | Textiles. Tests for colour fastness Colour fastness to vulcanization: Sulfur monochloride |
| BS EN 13277-1:2000 | Protective equipment for martial arts General requirements and test methods |
| BS EN ISO 105-B01:2014 | Textiles. Tests for colour fastness Colour fastness to light: Daylight |
| ISO 787-15:1986 | General methods of test for pigments and extenders Part 15: Comparison of resistance to light of coloured pigments of similar types |
| DIN EN 13245-1 E : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| DIN EN 15334 E : 2007 | SANITARY APPLIANCES - METHACRYLIC DISPERSIONS OF HIGH FILLER CONTENT |
| ISO 105-B10:2011 | Textiles — Tests for colour fastness — Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation |
| BS EN 12200-1:2016 | Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system |
| DIN EN 15200 E : 2007 | SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS |
| BS EN 14565:2004 | Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification |
| BS EN ISO 105-P02:2004 | Textiles. Tests for colour fastness Colour fastness to pleating. Steam pleating |
| UNE-EN ISO 20471:2013 | High visibility clothing - Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01) |
| BS EN 12877-2:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by injection moulding |
| DIN EN 13245-1:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| UNE-EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| ISO 105-N04:1993 | Textiles Tests for colour fastness Part N04: Colour fastness to bleaching: Sodium chlorite (severe) |
| BS EN ISO 105-G01:2016 | Textiles. Tests for colour fastness Colour fastness to nitrogen oxides |
| ISO 105-E08:1994 | Textiles Tests for colour fastness Part E08: Colour fastness to hot water |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| ISO 17228:2015 | Leather Tests for colour fastness Change in colour with accelerated ageing |
| UNE-EN ISO 5912:2012 | Camping tents (ISO 5912:2011) |
| BS EN 15200:2007 | Sanitary appliances. Multifunction shower cabinets |
| ISO 105-E10:1994 | Textiles Tests for colour fastness Part E10: Colour fastness to decatizing |
| BS EN ISO 105-E16:2007 | Textiles. Tests for colour fastness Colour fastness to water spotting on upholstery fabrics |
| ISO 5470-1:2016 | Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader |
| ISO 105-A08:2001 | Textiles — Tests for colour fastness — Part A08: Vocabulary used in colour measurement |
| UNE-EN ISO 105-A01:2010 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
| ISO 105-B01:2014 | Textiles Tests for colour fastness Part B01: Colour fastness to light: Daylight |
| ISO 105-E02:2013 | Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water |
| ISO 30023:2010 | Textiles Qualification symbols for labelling workwear to be industrially laundered |
| ISO 15027-2:2012 | Immersion suits Part 2: Abandonment suits, requirements including safety |
| ISO 3758:2012 | Textiles — Care labelling code using symbols |
| IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| ISO 16871:2003 | Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering |
| BS EN ISO 15703:1999 | Leather. Tests for colour fastness. Colour fastness to mild washing |
| ISO 11642:2012 | Leather — Tests for colour fastness — Colour fastness to water |
| ISO 105-X13:1994 | Textiles Tests for colour fastness Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting |
| ISO 105-X05:1994 | Textiles Tests for colour fastness Part X05: Colour fastness to organic solvents |
| ISO 105-S01:1993 | Textiles Tests for colour fastness Part S01: Colour fastness to vulcanization: Hot air |
| ISO 105-X14:1994 | Textiles Tests for colour fastness Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate |
| ISO 17700:2004 | Footwear Test methods for uppers, linings and insocks Colour fastness to rubbing |
| ISO 5674:2004 | Tractors and machinery for agriculture and forestry Guards for power take-off (PTO) drive-shafts Strength and wear tests and acceptance criteria |
| DIN EN ISO 105-E01:2013-06 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E01: COLOUR FASTNESS TO WATER (ISO 105-E01:2013) |
| BS EN ISO 105-E03:2010 | Textiles. Tests for colour fastness Colour fastness to chlorinated water (swimming-pool water) |
| BS EN ISO 105-N03:1995 | Textiles. Tests for colour fastness Colour fastness to bleaching: Sodium chlorite (mild) |
| BS EN ISO 19954:2003 | Footwear. Test methods for whole shoe. Washability in a domestic washing machine |
| BS EN 13245-1:2010 | Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Designation of PVC-U profiles |
| ISO 9405:2015 | Textile floor coverings — Assessment of changes in appearance |
| ISO 105-E16:2006 | Textiles Tests for colour fastness Part E16: Colour fastness to water spotting on upholstery fabrics |
| ISO 105-E03:2010 | Textiles Tests for colour fastness Part E03: Colour fastness to chlorinated water (swimming-pool water) |
| ISO 20471:2013 | High visibility clothing — Test methods and requirements |
| BS EN 13561:2015 | External blinds and awnings. Performance requirements including safety |
| ISO 105-P02:2002 | Textiles — Tests for colour fastness — Part P02: Colour fastness to pleating: Steam pleating |
| ISO 105-X11:1994 | Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressing |
| ISO 105-C10:2006 | Textiles Tests for colour fastness Part C10: Colour fastness to washing with soap or soap and soda |
| BS EN ISO 11644:2009 | Leather. Test for adhesion of finish |
| ISO 105-X06:1994 | Textiles Tests for colour fastness Part X06: Colour fastness to soda boiling |
| BS EN 12877-3:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by oven test |
| ISO 105-N02:1993 | Textiles Tests for colour fastness Part N02: Colour fastness to bleaching: Peroxide |
| UNE-EN ISO 105-E09:2010 | Textiles - Tests for colour fastness - Part E09: Colour fastness to potting (ISO 105-E09:2010) |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
| ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
| ISO 15027-1:2012 | Immersion suits Part 1: Constant wear suits, requirements including safety |
| ISO 105-C07:1999 | Textiles Tests for colour fastness Part C07: Colour fastness to wet scrubbing of pigment printed textiles |
| ISO 105-E12:2010 | Textiles Tests for colour fastness Part E12: Colour fastness to milling: Alkaline milling |
| ISO 19712-3:2007 | Plastics Decorative solid surfacing materials Part 3: Determination of properties Solid surface shapes |
| BS EN ISO 17700:2005 | Footwear. Test methods for uppers, linings and insocks. Colour fastness to rubbing |
| BS EN 14327:2003 | Leather. Physical and mechanical tests. Determination of abrasion resistance of automotive leather |
| UNE-EN ISO 105-C06:2010 | Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010) |
| BS EN ISO 15027-1:2012 | Immersion suits Constant wear suits, requirements including safety |
| BS EN 15330-1:2013 | Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use |
| ISO 19712-2:2007 | Plastics Decorative solid surfacing materials Part 2: Determination of properties Sheet goods |
| UNI EN ISO 5912 : 2011 | CAMPING TENTS |
| BS EN ISO 11641:2012 | Leather. Tests for colour fastness. Colour fastness to perspiration |
| BS EN ISO 105-X14:1997 | Textiles. Tests for colour fastness Colour fastness to acid chlorination of wool. Sodium dichloroisocyanurate |
| ISO 105-E09:2010 | Textiles Tests for colour fastness Part E09: Colour fastness to potting |
| UNE-EN 13329:2016 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| DIN EN ISO 105-E02:2013-06 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E02: COLOUR FASTNESS TO SEA WATER (ISO 105-E02:2013) |
| BS EN ISO 105-X07:1997 | Textiles. Tests for colour fastness Colour fastness to cross-dyeing. Wool |
| DIN EN ISO 105-D01:2010-10 | Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning using perchloroethylene solvent (ISO 105-D01:2010) |
| BS EN ISO 12947-2:2016 | Textiles. Determination of the abrasion resistance of fabrics by the Martindale method Determination of specimen breakdown |
| BS EN 20105-C02:1993 | Textiles. Tests for colour fastness Colour fastness to washing: Test 2 |
| ISO 105-B04:1994 | Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test |
| ISO 11641:2012 | Leather — Tests for colour fastness — Colour fastness to perspiration |
| BS EN ISO 15700:1999 | Leather. Tests for colour fastness. Colour fastness to water spotting |
| UNE-EN ISO 5774:2016 | Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
| ISO 105-E05:2010 | Textiles — Tests for colour fastness — Part E05: Colour fastness to spotting: Acid |
| BS EN ISO 105-X09:1996 | Textiles. Tests for colour fastness Colour fastness to formaldehyde |
| UNE-EN ISO 11642:2013 | Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2012) |
| BS EN ISO 105-Z01:1996 | Textiles. Tests for colour fastness Colour fastness to metals in the dye-bath: chromium salts |
| ISO 105-C02:1989 | Textiles Tests for colour fastness Part C02: Colour fastness to washing: Test 2 |
| UNE-EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| BS EN ISO 11642:2012 | Leather. Tests for colour fastness. Colour fastness to water |
| ISO 105-G03:1993 | Textiles Tests for colour fastness Part G03: Colour fastness to ozone in the atmosphere |
| ISO 105-C05:1989 | Textiles — Tests for colour fastness — Part C05: Colour fastness to washing: Test 5 |
| DIN EN 15334:2007-05 | Sanitary appliances - Methacrylic dispersions of high filler content |
| ISO 105-C04:1989 | Textiles Tests for colour fastness Part C04: Colour fastness to washing: Test 4 |
| I.S. EN ISO 105-D01:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART D01: COLOUR FASTNESS TO DRYCLEANING USING PERCHLOROETHYLENE SOLVENT |
| DIN EN ISO 20471:2017-03 | HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013, CORRECTED VERSION 2013-06-01 + AMD 1:2016) |
| DIN EN ISO 105-E07:2010-08 | Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010) |
| EN ISO 105-N03 : 1995 | TEXTILES - TESTS FOR COLOUR - FASTNESS - PART N03: COLOUR FASTNESS TO BLEACHING - SODIUM CHLORITE (MILD) (ISO 105-N03:1993) |
| EN 15334:2007 | Sanitary appliances - Methacrylic dispersions of high filler content |
| EN 15330-1:2013 | Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1: Specification for synthetic turf surfaces for football, hockey, rugby union training, tennis and multi-sports use |
| EN 20105-N01 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO BLEACHING: HYPOCHLORITE (ISO 105-N01:1993) |
| EN 20105-C06 : 1992 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING |
| EN 15200:2007/AC:2009 | SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS |
| EN 14327 : 2003 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF ABRASION RESISTANCE OF AUTOMOTIVE LEATHER |
| EN ISO 105-B01:2014 | Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight (ISO 105-B01:2014) |
| EN ISO 105-E09:2010 | Textiles - Tests for colour fastness - Part E09: Colour fastness to potting (ISO 105-E09:2010) |
| EN ISO 105-S02 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ANIZATION: SULFUR MONOCHLORIDE |
| EN ISO 105-X02 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CARBONIZING: SULPHURIC ACID |
| EN 15330-2:2017 | Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces |
| EN ISO 105-E13 : 1996 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ACID-FELTING: SEVERE |
| EN ISO 105-P02 : 2004 | Textiles - Tests for colour fastness - Part P02: Colour fastness to pleating: Steam pleating (ISO 105-P02:2002) |
| EN ISO 105-Z01 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO METALS IN THE DYE-BATH: CHROMIUM SALTS (ISO 105-Z01:1993) |
| EN 14120:2003+A1:2007 | Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods |
| EN ISO 26082-2:2012 | Leather - Physical and mechanical test methods for the determination of soiling - Part 2: Tumbling method (ISO 26082-2:2012) |
| EN 20105-C01 : 1992 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WASHING - TEST 1 |
| EN ISO 105-X09 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO FORMALDEHYDE |
| EN ISO 12947-4:1998/AC:2006 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE |
| EN 15115:2006 | Textile floor coverings - Determination of sensitivity to spilled water |
| EN ISO 105-Z06 : 2000 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z06: EVALUATION OF DYE AND PIGMENT MIGRATION |
| EN 14877:2013 | Synthetic surfaces for outdoor sports areas - Specification |
| EN ISO 19712-2:2013 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| EN ISO 877 : 1996 | |
| EN ISO 105-X01 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CARBONIZING - ALUMINIUM CHLORIDE (ISO 105-X01:1993) |
| EN ISO 105-X08 : 1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DEGUMMING |
| EN ISO 105-E08 : 1996 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E08: COLOUR FASTNESS TO HOT WATER |
| EN ISO 105-B05 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - DETECTION AND ASSESSMENT OF PHOTOCHROMISM |
| EN ISO 15700:1999 | Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998) |
| EN ISO 9405:2017 | Textile floor coverings - Assessment of changes in appearance (ISO 9405:2015) |
| EN ISO 11642:2012 | Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2012) |
| EN ISO 11644:2009 | Leather - Test for adhesion of finish (ISO 11644:2009) |
| EN ISO 15027-1:2012 | Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012) |
| EN ISO 105-X14 : 1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART X14: COLOUR FASTNESS TO ACID CHLORINATION OF WOOL: SODIUM DICHLOROISOCYANURATE |
| EN ISO 105-G01:2016 | Textiles - Tests for colour fastness - Part G01: Colour fastness to nitrogen oxides (ISO 105-G01:2016) |
| EN ISO 105-D02:2016 | Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents (ISO 105-D02:2016) |
| EN ISO 12947-2:2016 | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016) |
| EN ISO 787-15:1995 | GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 15: COMPARISON OF RESISTANCE TO LIGHT OF COLOURED PIGMENTS OF SIMILAR TYPES |
| EN ISO 20471:2013/A1:2016 | HIGH VISIBILITY CLOTHING - TEST METHODS AND REQUIREMENTS (ISO 20471:2013/AMD 1:2016) |
| EN 1471:1996/A1:2003 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE |
| EN ISO 105-A11:2012 | Textiles - Tests for colour fastness - Part A11: Determination of colour fastness grades by digital imaging techniques (ISO 105-A11:2012) |
| EN 15619:2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| EN ISO 105-N05 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO STOVING (ISO 105-N05:1993) |
| EN ISO 105-E06:2006/AC:2007 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E06: COLOUR FASTNESS TO SPOTTING: ALKALI |
| EN ISO 105-X13 : 1997 | Textiles - Tests for colour fastness - Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting (ISO 105-X13:1994) |
| EN 15649-1:2009+A2:2013 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| EN ISO 30013:2011 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| EN ISO 105-B04:1997 | Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO 105-B04:1994) |
| EN ISO 105-C07 : 2001 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C07: COLOUR FASTNESS TO WET SCRUBBING OF PIGMENT PRINTED TEXTILES |
| EN ISO 19712-3:2013 | Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
| EN ISO 11641:2012 | Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012) |
| EN 14465:2003/A1:2006 | TEXTILES - UPHOLSTERY FABRICS - SPECIFICATION AND METHODS OF TEST |
| EN ISO 105-P01 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DRY HEAT (EXCLUDING PRESSING) |
| EN ISO 105-B07:2009 | Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial perspiration (ISO 105-B07:2009) |
| EN ISO 15027-2:2012 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
| EN ISO 105-C06:2010 | Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010) |
| EN 15187:2006 | FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE |
| EN ISO 105-D01:2010 | Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning using perchloroethylene solvent (ISO 105-D01:2010) |
| EN ISO 105-N04 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO BLEACHING - SODIUM CHLORITE (SEVERE) |
| EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| EN ISO 11643:2009 | Leather - Tests for colour fastness - Colour fastness of small samples to solvents (ISO 11643:2009) |
| EN ISO 15703:1999 | Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998) |
| EN ISO 105-X05 : 1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ORGANIC SOLVENTS |
| EN 20105-B02 : 1992 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ARTIFICIAL LIGHT (XENON ARC FADING LAMP TEST) |
| EN 16732:2015 | Slide fasteners (zips) - Specification |
| EN ISO 105-E16:2007 | Textiles - Tests for colour fastness - Part E16: Colour fastness to water spotting on upholstery fabrics (ISO 105-E16:2006) |
| EN ISO 11758:1997/AC:1998 | RUBBER AND PLASTICS HOSES - EXPOSURE TO A XENON ARC LAMP - DETERMINATION OF CHANGES IN COLOUR AND APPEARANCE |
| EN ISO 105-G03 : 1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO OZONE IN THE ATMOSPHERE |
| EN ISO 105-E07:2010 | Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010) |
| EN 20105-C04 : 1992 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WASHING - TEST 4 |
| EN ISO 105-X11:1996 | Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing (ISO-X11:1994) |
| EN ISO 105-S01 : 1995 | Textiles - Tests for colour fastness - Part S01: Colour fastness to vulcanization: Hot air (ISO 105-S01/1993) |
| EN ISO 15702:1999 | Leather - Tests for colour fastness - Colour fastness to machine washing (ISO 15702:1998) |
| EN 471:2003+A1:2007 | High-visibility warning clothing for professional use - Test methods and requirements |
| EN ISO 3758:2012 | Textiles - Care labelling code using symbols (ISO 3758:2012) |
| EN ISO 105-X06 : 1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO SODA BOILING |
| EN 263:2008 | Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
| EN ISO 105-E02:2013 | Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013) |
| EN ISO 105-C08:2010 | Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator (ISO 105-C08:2010) |
| EN ISO 105-S03 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO VULCANIZATION : OPEN STEAM (ISO 105-S03:1993) |
| EN ISO 105-X07 : 1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CROSS-DYEING: WOOL |
| EN ISO 105-E12:2010 | Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010) |
| EN ISO 105-N02 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART N02: COLOUR FASTNESS TO BLEACHING - PEROXIDE (ISO 105-N02:1993) |
| EN ISO 105-E03:2010 | Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010) |
| EN 20105-A01 : 1992 | TEXTILES - TESTS FOR COLOUR FASTNESS - GENERAL PRINCIPLES OF TESTING |
| EN ISO 105-B08:1999/A1:2009 | Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 - Amendment 1 (ISO 105-B08:1995/Amd 1:2009) |
| EN ISO 105-E14 : 1996 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO ACID-FELTING: MILD |
| EN ISO 105-E05:2010 | Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting: Acid (ISO 105-E05:2010) |
| EN ISO 105-C12:2006/AC:2007 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C12: COLOUR FASTNESS TO INDUSTRIAL LAUNDERING |
| EN ISO 105-A08:2002 | Textiles - Tests for colour fastness - Part A08: Vocabulary used in colour measurement (ISO 105-A08:2001) |
| EN ISO 105-X04 : 1997 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO MERCERIZING |
| EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| EN ISO 105-E04:2013 | Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013) |
| EN ISO 105-Z02 : 1995 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO METALS IN THE DYE-BATH: IRON AND COPPER |
| EN ISO 105-B10:2011 | Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011) |
| EN ISO 5774:2016 | Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
| EN 20105-C02 : 1992 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO WASHING - TEST 2 |
| EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| EN ISO 105-C10:2007 | Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda (ISO 105-C10:2006) |
| BIS IS/ISO 105-E04 : 2008 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E04: COLOUR FASTNESS TO PERSPIRATION |
| UNI EN ISO 26082-1 : 2012 | LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 1: RUBBING (MARTINDALE) METHOD |
| ONORM EN ISO 12402-7 : 2015 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS (ISO 12402-7:2006 + AMD 1:2011) |
| 09/30199086 DC : DRAFT JAN 2009 | BS EN ISO 105-C08 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART C08: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR |
| BS EN ISO 19712-3:2013 | Plastics. Decorative solid surfacing materials Determination of properties. Solid surface shapes |
| 16/30315531 DC : 0 | BS ISO 4582 - PLASTICS - DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN PROPERTIES AFTER EXPOSURE TO DAYLIGHT UNDER GLASS, NATURAL WEATHERING OR LABORATORY LIGHT SOURCES |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| UNE-EN ISO 17076-1:2012 | Leather - Determination of abrasion resistance - Part 1: Taber method (ISO 17076-1:2012) |
| 12/30261644 DC : 0 | BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE |
| DIN EN ISO 105-B10 E : 2012 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011) |
| DIN EN ISO 26082-2:2012-10 | LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 2: TUMBLING METHOD (ISO 26082-2:2012) |
| I.S. EN ISO 11758:1998 | RUBBER AND PLASTICS HOSES - EXPOSURE TO A XENON ARC LAMP - DETERMINATION OF CHANGES IN COLOUR AND APPEARANCE |
| BS EN ISO 105-B10:2011 | Textiles. Tests for colour fastness Artificial weathering. Exposure to filtered xenon-arc radiation |
| DIN EN ISO 105-A08 E : 2003 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A08: VOCABULARY USED IN COLOUR MEASUREMENT |
| CEI EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| DIN EN 15619:2014-07 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
| BS EN 15836-2:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| I.S. EN ISO 30023:2012 | TEXTILES - QUALIFICATION SYMBOLS FOR LABELLING WORKWEAR TO BE INDUSTRIALLY LAUNDERED (ISO 30023:2010) |
| BIS IS 12673-4 : 2014 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE |
| 08/30190352 DC : DRAFT SEP 2008 | BS EN ISO 105-D01 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART D01: COLOUR FASTNESS TO DRY CLEANING USING PERCHLOROETHYLENE SOLVENT |
| NF EN ISO 105 D01 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART D01: COLOUR FASTNESS TO DRY CLEANING USING PERCHLOROETHYLENE SOLVENT |
| BS 903-A55:1989 | Physical testing of rubber Methods for assessment of changes in properties after exposure to natural weathering or artificial light, for use in determining resistance to weathering |
| UNE-EN ISO 26082-1:2012 | Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method (ISO 26082-1:2012) |
| NF EN ISO 105 C06 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING |
| NF EN ISO 105 E09 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING |
| UNI EN ISO 19712-2 : 2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| UNE-ISO 4582:2014 | Plastics. Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources |
| BS ISO 105-F05:2001 | Textiles. Tests for colour fastness Specification for acrylic adjacent fabric |
| BS ISO 4582:2017 | Plastics. Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| 08/30189974 DC : DRAFT DEC 2008 | BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| BIS IS/ISO 105-F02 : 2009 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART F02: SPECIFICATION FOR COTTON AND VISCOSE ADJACENT FABRICS |
| ISO 11377:1997 | Textile floor coverings Floor soiling Test site set-up and soiling evaluation |
| 10/30200375 DC : 0 | BS EN ISO 20471 - HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
| BS ISO 105-C08 : 2001 AMD 14165 | TEXTILES - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING USING A NON-PHOSPHATE REFERENCE DETERGENT INCORPORATING A LOW TEMPERATURE BLEACH ACTIVATOR |
| BS 903-A53:1989 | Physical testing of rubber Methods for exposure to natural weathering, for use in determining resistance to weathering |
| 14/30302995 DC : 0 | BS EN 16776 - RESILIENT FLOOR COVERINGS - HOMOGENEOUS AND HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION |
| PREN ISO 15027-2 : DRAFT 2010 | IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY |
| UNE-EN 13245-3:2011 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| PREN 13138-2 : DRAFT 2012 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
| I.S. EN 14906:2012 | LEATHER - LEATHER FOR AUTOMOTIVE - TEST METHODS AND TESTING PARAMETERS |
| 06/30148736 DC : 0 | EN 13138-1 - BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
| 08/30176454 DC : DRAFT JAN 2008 | BS EN ISO 27668-2 - GEL INK BALL PENS AND REFILLS - PART 2: DOCUMENTARY USE (DOC) |
| ISO 27668-2:2009 | Gel ink ball pens and refills Part 2: Documentary use (DOC) |
| DIN EN ISO 30023 E : 2012 | TEXTILES - QUALIFICATION SYMBOLS FOR LABELLING WORKWEAR TO BE INDUSTRIALLY LAUNDERED (ISO 30023:2010) |
| UNI EN ISO 105-A11 : 2013 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A11: DETERMINATION OF COLOUR FASTNESS GRADES BY DIGITAL IMAGING TECHNIQUES |
| DIN EN ISO 19712-3:2013-09 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
| I.S. EN 62329-2:2006 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| DIN ISO 20712-2:2008-08 | WATER SAFETY SIGNS AND BEACH SAFETY FLAGS - PART 2: SPECIFICATIONS FOR BEACH SAFETY FLAGS - COLOUR, SHAPE, MEANING AND PERFORMANCE |
| I.S. CEN TS 15256:2005 | PROTECTIVE CLOTHING - HAND, ARM, LEG, GENITAL AND NECK PROTECTORS FOR USE IN ICE HOCKEY - PROTECTORS FOR PLAYERS OTHER THAN GOALKEEPERS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14906:2012 | Leather - Leather for automotive - Test methods and testing parameters |
| ISO 11378-1:2000 | Textile floor coverings Laboratory soiling tests Part 1: Kappasoil test |
| ISO 4586-2:2015 | High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties |
| I.S. EN 12608-1:2016 | UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES |
| EN ISO 12870:2018 | Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2016) |
| ONORM EN ISO 105-G02 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART G02: COLOUR FASTNESS TO BURNT-GAS FUMES |
| I.S. EN 13329:2016 | LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| UNE-EN ISO 19712-3:2013 | Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
| PREN 13561 : DRAFT 2014 | EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| BS EN ISO 105-G02:1997 | Textiles. Tests for colour fastness Colour fastness to burnt-gas fumes |
| I.S. EN 15649-1:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| ISO 12757-1:2017 | Ball point pens and refills — Part 1: General use |
| DIN EN ISO 11640:2013-02 | LEATHER - TESTS FOR COLOUR FASTNESS - COLOUR FASTNESS TO CYCLES OF TO-AND-FRO RUBBING (ISO 11640:2012) |
| BIS IS/ISO 105-E03 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER) |
| EN ISO 26082-1:2012 | Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method (ISO 26082-1:2012) |
| NF EN ISO 105 E12 : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E12: COLOUR FASTNESS TO MILLING: ALKALINE MILLING |
| I.S. EN ISO 19712-2:2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007) |
| BS EN 16436-1 : 2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| S.R. CEN/TS 16641:2014 | TEXTILE FLOOR COVERINGS - GUIDELINES FOR ACCEPTABLE COLOUR DEVIATIONS |
| DIN EN ISO 26082-1:2012-07 | LEATHER - PHYSICAL AND MECHANICAL TEST METHODS FOR THE DETERMINATION OF SOILING - PART 1: RUBBING (MARTINDALE) METHOD (ISO 26082-1:2012) |
| EN ISO 105-B03:2017 | Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:2017) |
| ISO 105-F02:2009 | Textiles Tests for colour fastness Part F02: Specification for cotton and viscose adjacent fabrics |
| EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) |
| EN ISO 17076-1:2012 | Leather - Determination of abrasion resistance - Part 1: Taber method (ISO 17076-1:2012) |
| BS EN 13120:2009+A1:2014 | Internal blinds. Performance requirements including safety |
| DIN EN ISO 12402-7:2015-08 (Draft) | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 105-C12 E : 2006 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C12: COLOUR FASTNESS TO INDUSTRIAL LAUNDERING |
| DIN EN ISO 12947-4:2007-04 | Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change (ISO 12947-4:1998 + Cor. 1:2002) (includes Corrigendum AC:2006) |
| DIN EN 15330-1:2013-12 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| DIN EN 14327 E : 2004 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF ABRASION RESISTANCE OF AUTOMOTIVE LEATHER |
| DIN EN ISO 105-B08 E : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7 |
| DIN EN 12200-1:2016-10 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN ISO 105-C06 E : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING |
| DIN EN 13138-2:2015-02 | Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held |
| DIN EN 13559:2003-12 | SPECIFICATIONS FOR IMPACT MODIFIED COEXTRUDED ABS/ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES |
| DIN EN ISO 105-E09 E : 2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING |
| UNE-EN ISO 105-B08:2001 | TEXTILES. TESTS FOR COLOUR FASTNESS. PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7. (ISO 105-B08:1995) |
| ISO 30013:2011 | Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties |
| UNE-EN 13245-1:2011 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| BS EN ISO 105-B05:1996 | Textiles. Tests for colour fastness Detection and assessment of photochromism |
| ISO 105-C01:1989 | Textiles Tests for colour fastness Part C01: Colour fastness to washing: Test 1 |
| UNE-EN ISO 105-D01:2010 | Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning using perchloroethylene solvent (ISO 105-D01:2010) |
| BS EN ISO 105-Z02:1996 | Textiles. Tests for colour fastness Colour fastness to metals in the dye-bath. Iron and copper |
| BS EN 12877-1:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics General introduction |
| BS EN 13199-3:2000 | Packaging. Small load carrier systems Bond Stackable System (BSS) |
| BS EN ISO 105-X01:1996 | Textiles. Tests for colour fastness Colour fastness to carbonizing: Aluminium chloride |
| BS EN ISO 26082:2007 | Leather. Physical and mechanical tests. Determination of soiling with rubbing for automotive leather |
| ISO 105-A01:2010 | Textiles Tests for colour fastness Part A01: General principles of testing |
| BS EN ISO 11378-2 : 2001 | TEXTILE FLOOR COVERINGS - LABORATORY SOILING TESTS - PART 2: DRUM TEST |
| UNE-EN ISO 5470-1:2017 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| BS EN 13200-4:2006 | Spectator facilities Seats. Product characteristics |
| BS EN ISO 11643:2009 | Leather. Tests for colour fastness. Colour fastness of small samples to solvents |
| ISO 105-B08:1995 | Textiles — Tests for colour fastness — Part B08: Quality control of blue wool reference materials 1 to 7 |
| BS EN ISO 12947-3 : 1999 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 3: DETERMINATION OF MASS LOSS |
| ISO 105-B06:1998 | Textiles Tests for colour fastness Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test |
| BS EN 13516:2002 | Footwear. Test methods for uppers, lining and insocks. Colour fastness to rubbing |
| ISO 105-G01:2016 | Textiles Tests for colour fastness Part G01: Colour fastness to nitrogen oxides |
| BS EN ISO 105-X11:1996 | Textiles. Tests for colour fastness Colour fastness to hot pressing |
| ISO 105-X08:1994 | Textiles Tests for colour fastness Part X08: Colour fastness to degumming |
| I.S. EN ISO 5912:2011 | CAMPING TENTS (ISO 5912:2011) |
| BS EN ISO 105-X08:1997 | Textiles. Tests for colour fastness Colours fastness to degumming |
| ISO 105-C06:2010 | Textiles Tests for colour fastness Part C06: Colour fastness to domestic and commercial laundering |
| ISO 11644:2009 | Leather — Test for adhesion of finish |
| BS EN ISO 105-E09:2010 | Textiles. Tests for colour fastness Colour fastness to potting |
| BS EN ISO 15702:2000 | Leather. Tests for colour fastness. Colour fastness to machine washing |
| ISO 11378-2:2001 | Textile floor coverings — Laboratory soiling tests — Part 2: Drum test |
| BS EN 15334:2007 | Sanitary appliances. Methacrylic dispersions of high filler content |
| BS EN ISO 16871:2003 | Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering |
| ISO 5774:2016 | Plastics hoses — Textile-reinforced types for compressed-air applications — Specification |
| BS EN 15115:2006 | Textile floor coverings. Determination of sensitivity to spilled water |
| BS EN ISO 105-E01:2013 | Textiles. Tests for colour fastness Colour fastness to water |
| UNE-EN ISO 15027-2:2013 | Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012) |
| BS EN ISO 14113:2013 | Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| ISO 105-X09:1993 | Textiles Tests for colour fastness Part X09: Colour fastness to formaldehyde |
| ISO 12947-4:1998 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 4: Assessment of appearance change |
| ISO 105-D02:2016 | Textiles Tests for colour fastness Part D02: Colour fastness to rubbing: Organic solvents |
| BS EN 13546 : 2002 | PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, FOOT AND GENITAL PROTECTORS FOR FIELD HOCKEY GOAL KEEPERS AND SHIN PROTECTORS FOR FIELD PLAYERS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 15027-2:2012 | Immersion suits Abandonment suits, requirements including safety |
| BS EN 15187:2006 | Furniture. Assessment of the effect of light exposure |
| BS EN 13138-3:2014 | Buoyant aids for swimming instruction Safety requirements and test methods for swim seats to be worn |
| BS EN 14877:2013 | Synthetic surfaces for outdoor sports areas. Specification |
| ISO 15703:1998 | Leather — Tests for colour fastness — Colour fastness to mild washing |
| ISO 26082-2:2012 | Leather — Physical and mechanical test methods for the determination of soiling — Part 2: Tumbling method |
| EN 12200-1:2016 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| DIN EN ISO 5912:2013-08 | CAMPING TENTS (ISO 5912:2011) |
| EN 13559:2003 | Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes |
| EN 13138-1:2014 | Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn |
| DIN EN ISO 105-C12:2006-04 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C12: COLOUR FASTNESS TO INDUSTRIAL LAUNDERING |
| UNI EN 13138-2 : 2015 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 2: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE HELD |
| I.S. EN ISO 105-E03:2010 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER) |
| EN 13138-2:2014 | Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held |
| DIN EN 471:2003-12 | HIGH-VISIBILITY WARNING CLOTHING FOR PROFESSIONAL USE - TEST METHODS AND REQUIREMENTS |
| DIN EN ISO 9405:2017-09 | TEXTILE FLOOR COVERINGS - ASSESSMENT OF CHANGES IN APPEARANCE (ISO 9405:2015) |
| DIN EN ISO 105-E05:2010-12 | Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting: Acid (ISO 105-E05:2010) |
| DIN EN ISO 11642:2013-02 | Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2012) |
| EN 62329-2:2006 | Heat shrinkable moulded shapes - Part 2: Methods of test |
| DIN EN 15187:2006-12 | Furniture - Assessment of the effect of light exposure |
| DIN ISO 5912:2004-05 | CAMPING TENTS |
| EN 12608:2003 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods |
| EN 13200-4:2006 | Spectator facilities - Part 4: Seats - Product characteristics |
| DIN EN ISO 105-E03:2010-08 | Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010) |
| CEN/TS 15256:2005 | Protective clothing - Hand, arm, leg, genital and neck protectors for use in ice hockey - Protectors for players other than goalkeepers - Requirements and test methods |
| EN ISO 17701:2016 | Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016) |
| DIN EN 263:2008-06 | Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
| DIN EN ISO 105-A01:2010-05 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
| I.S. EN ISO 12947-4:1999 | TEXTILES - DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD - PART 4: ASSESSMENT OF APPEARANCE CHANGE |
| DIN EN ISO 11643:2009-10 | Leather - Tests for colour fastness - Colour fastness of small samples to solvents (ISO 11643:2009) |
| DIN EN ISO 105-B07:2009-10 | Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial perspiration (ISO 105-B07:2009) |
| DIN EN ISO 105-E12:2010-08 | Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010) |
| DIN EN ISO 11641:2013-02 | Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012) |
| DIN EN ISO 105-B08:2010-02 | Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 (ISO 105-B08:1995 + Amd 1:2009) (includes Amendment A1:2009) |
| DIN EN 12608-1:2016-08 | UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES |
| DIN EN ISO 19954:2003-12 | FOOTWEAR - TEST METHODS FOR WHOLE SHOE - WASHABILITY IN A DOMESTIC WASHING MACHINE |
| DIN EN ISO 17076-1:2012-06 | LEATHER - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER METHOD (ISO 17076-1:2012) |
| DIN EN ISO 105-C10:2007-06 | Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda (ISO 105-C10:2006) |
| DIN EN 14327:2004-03 | LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF ABRASION RESISTANCE OF AUTOMOTIVE LEATHER |
| DIN EN 15330-2:2017-09 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 2: SPECIFICATION FOR NEEDLE-PUNCHED SURFACES FOR TENNIS AND MULTI-SPORT SURFACES |
| UNI EN 13138-1 : 2014 | BUOYANT AIDS FOR SWIMMING INSTRUCTION - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR BUOYANT AIDS TO BE WORN |
| EN 13245-1:2010 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| DIN EN ISO 11644:2009-09 | Leather - Test for adhesion of finish (ISO 11644:2009) |
| DIN EN ISO 105-A08:2003-01 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A08: VOCABULARY USED IN COLOUR MEASUREMENT |
| BS 7619:2010 | Extruded cellular unplasticized white PVC (PVC-UE) profiles. Specification |
| I.S. EN ISO 105-C12:2006 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART C12: COLOUR FASTNESS TO INDUSTRIAL LAUNDERING |
US$49.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.