• There are no items in your cart

ISO 10576-1:2003

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

08-05-2022

Language(s)

English, French

Published date

03-10-2003

ISO 10576-1:2002 sets out guidelines for drafting requirements that may be formulated as limiting values for a quantifiable characteristic and for checking conformity to such requirements when the test or measurement result is subject to uncertainty.

It is applicable whenever the uncertainty may be quantified according to the principles laid down in the Guide to the expression of uncertainty in measurement. The term uncertainty is thus a descriptor for all elements of variation in the measurement result, including uncertainty due to sampling.

It is outside the scope of ISO 10576-1:2002 to give rules for how to act when an inconclusive result of a conformity test has been obtained.

DevelopmentNote
Supersedes ISO/DIS 10576-1 (03/2003) Also numbered as BIS IS 16179-1. (02/2015)
DocumentType
Standard
Pages
15
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy

BS ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
OIML G 1-106 : 2012 EVALUATION OF MEASUREMENT DATA - THE ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT
BS ISO 3951-2:2013 Sampling procedures for inspection by variables General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
CEI UNI EN ISO/IEC 17067 : 2013 CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES
BS ISO 3951-1:2013 Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
UNE-EN ISO 14644-9:2014 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
BS EN ISO/IEC 17067:2013 Conformity assessment. Fundamentals of product certification and guidelines for product certification schemes
BS 6002-2:2007 Sampling procedures for inspection by variables General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
12/30247200 DC : 0 BS ISO 3951-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL
ISO 5667-20:2008 Water quality Sampling Part 20: Guidance on the use of sampling data for decision making Compliance with thresholds and classification systems
ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
I.S. EN ISO/IEC 17067:2013 CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES (ISO/IEC 17067:2013 (EQV))
ISO/IEC Guide 98-1:2009 Uncertainty of measurement — Part 1: Introduction to the expression of uncertainty in measurement
SAE AS 9138 : 2018 AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS
ASTM C 1128 : 2018 : REDLINE Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
CEN/TR 15592:2007 Health services - Quality management systems - Guide for the use of EN ISO 9004:2000 in health services for performance improvement
BS ISO 26367-2:2017 Guidelines for assessing the adverse environmental impact of fire effluents Methodology for compiling data on environmentally significant emissions from fires
ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
12/30259670 DC : 0 BS ISO/IEC GUIDE 98-4.2 - UNCERTAINTY OF MEASUREMENT - PART 4: ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT
12/30236911 DC : 0 BS EN ISO/IEC 17067 - CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES
ISO 26367-2:2017 Guidelines for assessing the adverse environmental impact of fire effluents — Part 2: Methodology for compiling data on environmentally significant emissions from fires
UNI ISO/TR 18532 : 2010 Guide to the application of statistical methods for quality and standardization in the industrial sector
BS 6002-1:2007 Sampling procedures for inspection by variables Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS EN ISO 14644-9:2012 Cleanrooms and associated controlled environments Classification of surface cleanliness by particle concentration
08/30190157 DC : DRAFT SEP 2008 BS EN ISO 14644-9 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE PARTICLE CLEANLINESS
PD CEN/TR 15592:2007 Health services. Quality management systems. Guide for the use of EN ISO 9004:2000 in health services for performance improvement
S.R. CEN/TR 15592:2007 HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9004:2000 IN HEALTH SERVICES FOR PERFORMANCE IMPROVEMENT
PREN 9138 : 200P1 AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS
UNE-EN ISO/IEC 17067:2014 Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes (ISO/IEC 17067:2013)
I.S. EN ISO 14644-9:2012 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE CLEANLINESS BY PARTICLE CONCENTRATION (ISO 14644-9:2012)
UNI/TS 11326-2 : 2015 ACOUSTICS - EVALUATION OF THE UNCERTAINTY OF MEASUREMENTS AND CALCULATIONS IN ACOUSTICS - PART 2: COMPLIANCE WITH SPECIFICATIONS
UNI ISO 3951-2 : 2014 SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS
ISO/IEC Guide 98-4:2012 Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment
DIN EN ISO 14644-9:2012-12 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
OIML G 1-104 : 2009 EVALUATION OF MEASUREMENT DATA - AN INTRODUCTION TO THE "GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT" AND RELATED DOCUMENTS
BS ISO 5667-20:2008 Water quality. Sampling Guidance on the use of sampling data for decision making. Compliance with thresholds and classification systems
ISO/IEC TR 17028:2017 Conformity assessment Guidelines and examples of a certification scheme for services
04/30119227 DC : DRAFT SEP 2004 BS ISO 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS
15/30330450 DC : 0 BS EN 9138 - AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS
ISO 3951-2:2013 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
UNI EN ISO 14644-9 : 2012 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 9: CLASSIFICATION OF SURFACE CLEANLINESS BY PARTICLE CONCENTRATION
IWA 1:2005 Quality management systems Guidelines for process improvements in health service organizations
ISO 14644-9:2012 Cleanrooms and associated controlled environments Part 9: Classification of surface cleanliness by particle concentration
UNE-ISO 3951-2:2012 Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
EN ISO/IEC 17067:2013 Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes (ISO/IEC 17067:2013)
12/30245656 DC : 0 ISO/DIS 3951-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS
UNI ISO 3951-1 : 2014 SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL
PD ISO/IEC TR 17028:2017 Conformity assessment. Guidelines and examples of a certification scheme for services
UNI CEI EN ISO/IEC 17067 : 2013 CONFORMITY ASSESSMENT - FUNDAMENTALS OF PRODUCT CERTIFICATION AND GUIDELINES FOR PRODUCT CERTIFICATION SCHEMES
ISO 3951-1:2013 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO/TS 14253-2:1999 Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 2854:1976 Statistical interpretation of data — Techniques of estimation and tests relating to means and variances
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 2602:1980 Statistical interpretation of test results Estimation of the mean Confidence interval
ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO 3534-1:2006 Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.