BS 7403-12:2000
|
Full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting, and contaminant retention capacity
|
MIL-DTL-8815-31 Base Document:2009
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3,000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F
|
05/30098238 DC : 0
|
ISO 21081-2 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 2: FILTER BLOCKAGE TECHNIQUE
|
BS ISO 14085-3:2015
|
Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity
|
13/30271038 DC : 0
|
BS ISO 14085-4 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 4: VERIFICATION OF COLLAPSE/BURST PRESSURE RATING
|
BS ISO 19438:2003
|
Diesel fuel and petrol filters for internal combustion engines. Filtration efficiency using particle counting and contaminant retention capacity
|
EI 1570 : 2012
|
HANDBOOK ON ELECTRONIC SENSORS FOR THE DETECTION OF PARTICULATE MATTER AND/OR FREE WATER DURING AIRCRAFT REFUELLING
|
ISO 21018-3:2008
|
Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 3: Use of the filter blockage technique
|
SAE J 1985 : 2013
|
FUEL FILTERS - INITIAL SINGLE-PASS EFFICIENCY TEST METHOD
|
ISO 16889:2008
|
Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element
|
ISO 21018-1:2008
|
Hydraulic fluid power Monitoring the level of particulate contamination of the fluid Part 1: General principles
|
ISO 16232-9:2007
|
Road vehicles Cleanliness of components of fluid circuits Part 9: Particle sizing and counting by automatic light extinction particle counter
|
ISO/TS 13353:2002
|
Diesel fuel and petrol filters for internal combustion engines Initial efficiency by particule counting
|
BS ISO 14085-4:2015
|
Aerospace series. Hydraulic filter elements. Test methods Verification of collapse/burst pressure rating
|
MIL-DTL-8815-32 Base Document:2010
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, H-60 AIRCRAFT
|
14/30273508 DC : 0
|
BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE
|
BS ISO 16889 : 2008
|
HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT
|
ISO 14085-3:2015
|
Aerospace series Hydraulic filter elements Test methods Part 3: Filtration efficiency and retention capacity
|
BS ISO 21018-1:2008
|
Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid General principles
|
BS ISO 16232-9:2007
|
Road vehicles. Cleanliness of components of fluid circuits Particle sizing and counting by automatic light extinction particle counter
|
SAE ARP 1827C : 2014
|
MEASURING AIRCRAFT GAS TURBINE ENGINE FINE FUEL FILTER ELEMENT PERFORMANCE
|
ISO 4548-12:2017
|
Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity
|
ISO/TR 16144:2002
|
Hydraulic fluid power Calibration of liquid automatic particle counters Procedures used to certify the standard reference material SRM 2806
|
BS ISO 18413:2015
|
Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting
|
NF ISO 16232-9 : 2011
|
ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 9: PARTICLE SIZING AND COUNTING BY AUTOMATIC LIGHT EXTINCTION PARTICLE COUNTER
|
ISO 21018-4:2016
|
Hydraulic fluid power Monitoring the level of particulate contamination in the fluid Part 4: Use of the light extinction technique
|
04/30098167 DC : DRAFT APR 2004
|
ISO 16232-9 - ROAD VEHICLES - FLUID CIRCUITS - CLEANLINESS OF COMPONENTS - PART 9: PARTICLE SIZING AND COUNTING BY AUTOMATIC LIGHT EXTINCTION PARTICLE COUNTER
|
13/30271035 DC : 0
|
BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY
|
BS ISO 21018-3:2008
|
Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid Use of the filter blockage technique
|
05/30098235 DC : 0
|
ISO 21081-1 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES
|
DD ISO/TR 16144:2002
|
Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806
|
17/30360001 DC : 0
|
BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE
|
SAE ARP 5454 : 2014
|
MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF FINE LUBE FILTER ELEMENTS UTILIZED IN AEROSPACE POWER AND PROPULSION LUBRICATION SYSTEMS
|
16/30316730 DC : 0
|
BS ISO 4548-12 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 12: FILTRATION EFFICIENCY USING PARTICLE COUNTING, AND CONTAMINANT RETENTION CAPACITY
|
ISO 19438:2003
|
Diesel fuel and petrol filters for internal combustion engines — Filtration efficiency using particle counting and contaminant retention capacity
|
SAE J 2312 : 2013
|
AUTOMATIC TRANSMISSION INTAKE FILTER TEST PROCEDURE
|
BS ISO/TR 16386:1999
|
Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards
|
PD ISO/TR 16386:2014
|
Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards
|
BS ISO 4548-12:2017
|
Methods of test for full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention capacity
|
98/717481 DC : DRAFT DEC 1998
|
ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT
|
06/30128772 DC : DRAFT OCT 2006
|
ISO 16889 - HYDRAULIC FLUID POWER FILTERS - MULTI-PASS METHOD FOR FILTRATION PERFORMANCE OF A FILTER ELEMENT
|
MIL-DTL-8815-33 Base Document:2011
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3500 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, AVIATION GROUND POWER UNIT (AGPU)
|
ISO/TR 16386:2014
|
Impact of changes in ISO fluid power particle counting Contamination control and filter test standards
|
ISO 18413:2015
|
Hydraulic fluid power Cleanliness of components Inspection document and principles related to contaminant extraction and analysis, and data reporting
|
BS ISO 21018-4:2016
|
Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid Use of the light extinction technique
|
ISO 14085-4:2015
|
Aerospace series Hydraulic filter elements Test methods Part 4: Verification of collapse/burst pressure rating
|