• There are no items in your cart

ISO 13631:2002

Current
Current

The latest, up-to-date edition.

Petroleum and natural gas industries Packaged reciprocating gas compressors
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

08-22-2002

ISO 13631:2002 gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of packaged skid-mounted, reciprocating, separable or integral compressors with lubricated cylinders and their prime movers, for use in the petroleum and natural gas industries for the compression of hydrocarbon gas.

It is also applicable to all necessary auxiliary equipment, such as water and gas coolers, silencers, emission control equipment, filters, separators, control panel, piping, etc., required to install an operable unit in compliance with the purchase specifications and with the intent of minimizing field construction and field-purchased equipment.

ISO 13631:2002 is not applicable to the following:

  • reciprocating compressors for petroleum and natural gas industries covered by ISO 13707;
  • column-mounted compressors;
  • non-lubricated compressors;
  • compressors having trunk-type (automotive-type) pistons that also serve as crossheads;
  • utility or instrument air compressors with a discharge gauge pressure of 0,9 MPa (9 bar) or less;
  • compressors driven by diesel engine, gas turbine and steam turbine prime movers.

DevelopmentNote
Supersedes ISO/DIS 13631 (08/2002) Supersedes API 11P. (08/2007)
DocumentType
Standard
Pages
80
ProductNote
THIS STANDARD ALSO REFERS TO IEC 60364-5
PublisherName
International Organization for Standardization
Status
Current
Supersedes

BS ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Safety
API 618 : 2007 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
BS EN 62282-3-100:2012 Fuel cell technologies Stationary fuel cell power systems. Safety
BS EN 62282-3-1:2007 Fuel cell technologies Stationary fuel cell power systems. Safety
API 618 : 2007 : R2016 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
NF ISO 16110-1 : 2009 HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
05/30060689 DC : DRAFT JUN 2005 IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY
IEC 62282-3-1:2007 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
I.S. EN 12583:2014 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
EN 62282-3-1 : 2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
I.S. EN 62282-3-1:2007 FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
I.S. EN ISO 14224:2016 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
DIN EN 12583:2000-11 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
16/30354071 DC : 0 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
CEI EN 62282-3-100 : 2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
DIN EN 12583:2014-07 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
OVE/ONORM EN 62282-3-100 : 2013 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012)
UNI EN 12583 : 2014 GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
12/30258747 DC : DRAFT MAR 2012 BS EN 12583 - GAS INFRASTRUCTURE - COMPRESSOR STATIONS - FUNCTIONAL REQUIREMENTS
UNE-EN 62282-3-1:2011 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
I.S. EN 62282-3-100:2012 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
13/30276640 DC : 0 BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY
BS EN 12583:2014 Gas Infrastructure. Compressor stations. Functional requirements
UNE-EN 12583:2014 Gas Infrastructure - Compressor stations - Functional requirements
UNE-ISO 16110-1:2015 Hydrogen generators using fuel processing technologies -- Part 1: Safety
IEC 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
10/30238615 DC : DRAFT NOV 2010 BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
EN 12583:2014 Gas Infrastructure - Compressor stations - Functional requirements

ISO 13707:2000 Petroleum and natural gas industries Reciprocating compressors
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
ISO 14691:2008 Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — General-purpose applications
ISO 15649:2001 Petroleum and natural gas industries — Piping
ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
ISO 68-2:1998 ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads
API 1B : 1995 SPECIFICATION FOR OIL FIELD V-BELT
API 661 : 2015 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS
ISO 4126-1:2013 Safety devices for protection against excessive pressure Part 1: Safety valves
ASTM A 395/A395M : 1999 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
EN 10213-2 : 1995 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 2: STEEL GRADES FOR USE AT ROOM TEMPERATURE AND ELEVATED TEMPERATURES
NEMA 250 : 2014 ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM)
ASME B31.3:2016 PROCESS PIPING
EN ISO 10441:2007 Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - Special-purpose applications (ISO 10441:2007)
EN ISO 8504-2:2001 Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000)
ISO/TS 16528:2002 Boilers and pressure vessels Registration of Codes and Standards to promote international recognition
ISO 281:2007 Rolling bearings Dynamic load ratings and rating life
NACE MR 01 75 : 2003 METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
API 670 : 2014 MACHINERY PROTECTION SYSTEMS
ISO 5864:1993 ISO inch screw threads Allowances and tolerances
ISO 1813:2014 Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60848:2013 GRAFCET specification language for sequential function charts
EN 10213-1 : 1995 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL
EN 10213-3 : 1995 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 3: STEEL GRADES FOR USE AT LOW TEMPERATURES
EN 1563:2011 Founding - Spheroidal graphite cast irons
API 526 : 2017 FLANGED STEEL PRESSURE-RELIEF VALVES
ISO 9934-2:2015 Non-destructive testing Magnetic particle testing Part 2: Detection media
ASTM E 125 : 1963 : R2003 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
ISO 13706:2011 Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
ISO 185:2005 Grey cast irons Classification
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
EN ISO 14691:2008 Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - General-purpose applications (ISO 14691:2008)
ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning
ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
EN 10213-4 : 1995 TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES
ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
ISO 4986:2010 Steel castings Magnetic particle inspection
ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 3: Hand- and power-tool cleaning
ISO 263:1973 ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in
EN 1561:2011 Founding - Grey cast irons

View more information
US$225.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.