• There are no items in your cart

ISO 14405-1:2016

Current
Current

The latest, up-to-date edition.

Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English

Published date

08-04-2016

ISO 14405-1:2016 establishes the default specification operator (see ISO 17450‑2) for linear size and defines a number of special specification operators for linear size for features of size, e.g. "cylinder", "sphere", "torus,"[1], "circle", "two parallel opposite planes", or "two parallel opposite straight lines".

It also defines the specification modifiers and the drawing indications for these linear sizes.

It covers the following linear sizes:

a) local size:

- two-point size;

- spherical size;

- section size;

- portion size;

b) global size:

- direct global linear size:

- least-squares size;

- maximum inscribed size;

- minimum circumscribed size;

- minimax size;

- indirect global linear size;

c) calculated size:

- circumference diameter;

- area diameter;

- volume diameter;

d) rank-order size:

- maximum size;

- minimum size;

- average size;

- median size;

- mid-range size;

- range of sizes;

- standard deviation of sizes.

ISO 14405-1:2016 defines tolerances of linear sizes for the following:

- a + and/or − limit deviation (e.g. 0/−0,019);

- an upper limit of size (ULS) and/or lower limit of size (LLS) (e.g. 15,2 max., 12 min., or 30,2/30,181);

- an ISO tolerance class code in accordance with ISO 286‑1 (e.g. 10 h6);

with or without modifiers.

ISO 14405-1:2016 provides a set of tools to express several types of size characteristic. It does not present any information on the relationship between a function or a use and a size characteristic.

[1] A torus is a feature of size when its directrix diameter is fixed.

DevelopmentNote
Supersedes ISO/DIS 14405-1. (08/2016)
DocumentType
Standard
Pages
54
PublisherName
International Organization for Standardization
Status
Current
Supersedes

ISO 1206:2018 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ISO 199:2014 Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values
I.S. EN ISO 1938-2:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
13/30263803 DC : 0 BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING
BS EN ISO 3040:2016 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
16/30334592 DC : 0 BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION
DIN EN ISO 17450-2:2013-04 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
13/30281595 DC : 0 BS ISO 464 - ROLLING BEARINGS - RADIAL BEARINGS WITH LOCATING SNAP RING - DIMENSIONS AND GEOMETRICAL TOLERANCES (GPS)
DIN EN ISO 14405-3 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016)
12/30262686 DC : 0 BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
BS ISO 12297-2:2018 Rolling bearings. Cylindrical rollers Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
16/30339565 DC : 0 BS ISO 12297-2 - ROLLING BEARINGS - CYLINDRICAL ROLLERS - PART 2: CERAMIC ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
UNE-EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
UNE-EN ISO 17450-2:2015 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
DIN EN ISO 14405-2:2012-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
UNE-EN ISO 286-2:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
I.S. EN ISO 14405-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
ISO 3245:2015 Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
UNI EN ISO 17450-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES
UNE-EN ISO 14405-2:2015 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
BS EN ISO 2692:2014 Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS 8888:2011 Technical product documentation and specification
EN ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
I.S. EN ISO 17296-3:2016 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014)
17/30348146 DC : 0 BS ISO 7063 - ROLLING BEARINGS - NEEDLE ROLLER BEARING TRACK ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
13/30275718 DC : 0 BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION
PD ISO/TS 17863:2013 Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
15/30321493 DC : 0 BS ISO 129-1 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
DIN EN ISO 8015:2011-09 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
DIN EN ISO 14638 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
BS EN ISO 17450-2:2012 Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities
11/30234091 DC : DRAFT JULY 2011 BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION
EN ISO 2692:2014 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
ONORM EN ISO 286-1 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010 + COR 1:2013)
UNE-EN ISO 286-1:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)
BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes
ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
UNE-EN ISO 2692:2015 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
I.S. EN ISO 2692:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
17/30348149 DC : 0 BS ISO 3096 - ROLLING BEARINGS - NEEDLE ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
BS EN ISO 1938-2:2017 Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges
BS ISO 464:2015 Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
BS EN ISO 18391:2016 Geometrical product specifications (GPS). Population specification
BS EN ISO 17296-3:2016 Additive manufacturing. General principles Main characteristics and corresponding test methods
I.S. EN ISO 17450-2:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
12/30264410 DC : 0 BS ISO 199 - ROLLING BEARINGS - THRUST BEARINGS - TOLERANCES
UNE-EN ISO 8015:2012 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
ABMA ISO 199 : 2014 ROLLING BEARINGS - THRUST BEARINGS - GEOMETRICAL PRODUCT SPECIFICATION (GPS) AND TOLERANCE VALUES
ISO/TS 17863:2013 Geometrical product specification (GPS) Tolerancing of moveable assemblies
DIN EN ISO 2692:2015-12 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
ISO 464:2015 Rolling bearings Radial bearings with locating snap ring Dimensions, geometrical product specifications (GPS) and tolerance values
EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
DIN EN ISO 14405-3:2013-08 (Draft) GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016)
BS EN ISO 286-1:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits
DIN EN ISO 14638:2015-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
14/30257552 DC : 0 BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES
BS EN ISO 8015:2011 Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
BS EN ISO 14405-3:2017 Geometrical product specifications (GPS). Dimensional tolerancing Angular sizes
BS EN ISO 14638:2015 Geometrical product specifications (GPS). Matrix model
15/30284673 DC : 0 BS EN ISO 17450-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING FORM, ORIENTATION LOCATION AND RUN-OUT DEVIATION
BS ISO 492:2014 Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
BS ISO 16792:2006 Technical product documentation. Digital product definition data practices
ISO 16792:2015 Technical product documentation Digital product definition data practices
17/30346164 DC : 0 BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
I.S. EN ISO 1938-1:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015)
UNI EN ISO 14405-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
I.S. EN ISO 3040:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - CONES (ISO 3040:2016)
DIN EN ISO 286-2:2010-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
ISO 14405-2:2011 Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes
PREN ISO 2692 : DRAFT 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012)
ISO 18391:2016 Geometrical product specifications (GPS) Population specification
ISO 2692:2014 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 17450-2:2012 Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
ISO 3040:2016 Geometrical product specifications (GPS) Dimensioning and tolerancing Cones
ISO 1938-1:2015 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
ISO 14638:2015 Geometrical product specifications (GPS) Matrix model
ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
ISO 14405-3:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
ISO 17296-3:2014 Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods
EN ISO 8015:2011 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
EN ISO 17296-3:2016 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)
EN ISO 17450-2:2012 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
EN ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
EN ISO 18391:2016 Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
DIN EN ISO 1938-2 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
DIN EN ISO 1938-1:2016-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
16/30341970 DC : 0 BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
BS ISO 17296-3 : 2014 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS
DIN EN ISO 1938-2:2017-05 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
BIS IS 919-1 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCE, DEVIATION AND FITS
ISO 12297-2:2018 Rolling bearings — Cylindrical rollers — Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
11/30231340 DC : 0 BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE
13/30272933 DC : 0 BS EN ISO 14405-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES
BS EN ISO 1938-1:2015 Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size
14/30299349 DC : 0 BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES
12/30258651 DC : 0 BS ISO 492 - ROLLING BEARINGS - RADIAL BEARINGS - DIMENSIONAL AND GEOMETRICAL TOLERANCES
I.S. EN ISO 14638:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
13/30271610 DC : 0 BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS
UNI EN ISO 8015 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
13/30240527 DC : 0 BS ISO 129-2 - TECHNICAL PRODUCT DOCUMENTATION - INDICATION OF DIMENSIONS AND TOLERANCES - PART 2: DIMENSIONING OF MECHANICAL ENGINEERING DRAWINGS
BS ISO 199:2014 Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values
BS ISO 3245:2015 Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
I.S. EN ISO 14405-3:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO/DIS 14405-3:2013)
I.S. EN ISO 8015:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
I.S. EN ISO 18391:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - POPULATION SPECIFICATION (ISO 18391:2016)
NF EN ISO 14405-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
UNE-EN ISO 17296-3:2017 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)
ISO 1938-2:2017 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges
DIN EN ISO 14405-3:2017-07 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016)
BS 8888:2013 Technical product documentation and specification

ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
ISO 14638:2015 Geometrical product specifications (GPS) Matrix model
ISO/TS 17863:2013 Geometrical product specification (GPS) Tolerancing of moveable assemblies
ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
ISO 17450-1:2011 Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification
ISO 81714-1:2010 Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules
ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
ISO 3098-2:2000 Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks
ISO 17450-3:2016 Geometrical product specifications (GPS) General concepts Part 3: Toleranced features
ISO 17450-2:2012 Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
ISO 10579:2010 Geometrical product specifications (GPS) Dimensioning and tolerancing Non-rigid parts

View more information
US$225.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.