• There are no items in your cart

ISO 16369:2007

Current
Current

The latest, up-to-date edition.

Elevating work platforms Mast-climbing work platforms
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

10-11-2007

ISO 16369:2007 specifies particular safety requirements for mast-climbing work platforms (MCWP) which are temporarily installed and are manually or power-operated, and which are designed to be used by one or more persons from which to carry out work.

ISO 16369:2007 is also applicable to permanently installed MCWPs.

ISO 16369:2007 is applicable to work platforms which are elevated by a drive system and guided by and moved along their supporting masts, where the masts may or may not require lateral restraint from separate supporting structures.

ISO 16369:2007 is applicable to any combination of the following alternatives: one or more masts; mast tied or untied; mast of fixed or variable length; masts vertical or inclined between 0o and 30o to the vertical; masts which are standing or hanging; movable or static base (chassis or base frame); manual or power-operated elevation; towed or self-powered ground travel on site, excluding road traffic regulation requirements; driven using electric, pneumatic, hydraulic motors or internal combustion engines.

ISO 16369:2007 identifies the hazards arising during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards and for the use of safe working practices.

ISO 16369:2007 does not specify the requirements for dealing with the hazards involved in the manoeuvring, erection or dismantling, fixing or removing of any materials or equipment which are not part of the MCWP, nor does it deal with the handling of specific hazardous materials.

ISO 16369:2007 does not specify the requirements for delivering persons and materials to fixed landing levels. Such equipment is referred to as lifts or hoists and is dealt with by other International Standards.

ISO 16369:2007 does not apply to mobile elevating work platforms (MEWPs), suspended access equipment or lifting tables.

DevelopmentNote
Supersedes ISO/DIS 16369. (10/2007)
DocumentType
Standard
Pages
68
PublisherName
International Organization for Standardization
Status
Current
Supersedes

PD ISO/TR 12603:2010 Building construction machinery and equipment. Classification
ISO/TR 12603:2010 Building construction machinery and equipment Classification
B354.9-17 Design, calculations, safety requirements, and test methods for mast climbing work platforms (MCWPs)
ISO 16368:2010 Mobile elevating work platforms Design, calculations, safety requirements and test methods
BS ISO 16368:2003 Mobile elevating work platforms. Design calculations, safety requirements and test methods
CAN/CSA-B354.6:17 Mobile elevating work platforms — Design, calculations, safety requirements, and test methods (Adopted ISO 16368:2010, second edition , 2010-05-15, with Canadian deviations)

EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 4302:2016 Cranes Wind load assessment
EN 1570:1998+A2:2009 Safety requirements for lifting tables
ISO 6336-2:2006 Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting)
ISO 13852:1996 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
ISO 6336-3:2006 Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength
ISO 8686-1:2012 Cranes — Design principles for loads and load combinations — Part 1: General
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
ISO 6336-5:2016 Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials
ISO 16368:2010 Mobile elevating work platforms Design, calculations, safety requirements and test methods
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
ISO 6336-1:2006 Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
ISO 13854:2017 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN 1808:2015 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
ISO 4301-1:2016 Cranes — Classification — Part 1: General
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS

View more information
US$225.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.