ISO 1817:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Rubber, vulcanized or thermoplastic Determination of the effect of liquids
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
06-01-2022
Language(s)
English, French
Published date
02-11-2015
ISO 1817:2015 describes methods of evaluating the resistance of vulcanized and thermoplastic rubbers to the action of liquids by measurement of properties of the rubbers before and after immersion in test liquids. The liquids concerned include current service liquids, such as petroleum derivatives, organic solvents and chemical reagents, as well as reference test liquids.
| DevelopmentNote |
Supersedes ISO/DIS 1817. (02/2015)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF ISO 1817 : 2015 | Identical |
| UNI ISO 1817 : 2014 | Identical |
| BS ISO 1817:2015 | Identical |
| DIN ISO 1817:2016-11 | Identical |
| NEN ISO 1817 : 2015 | Identical |
| IS 3400 : Part 6:2018 | Identical |
| UNE-ISO 1817:2006 | Identical |
| UNI ISO 1817 : 2015 | Identical |
| SS-ISO 1817:2016 | Identical |
| NFT 46 013 : 1985 | Similar to |
| BS 903-A16(1999) : 1999 | Identical |
| UNE 53540:1994 | Identical |
| GOST R ISO 1817 : 2009 | Identical |
| UNE-ISO 1817:2018 | Identical |
| NBN E 48 113 : 1988 | Identical |
| BIS IS 3400-6 : 2012 | Identical |
| I.S. ISO 1817:1986 | Identical |
| NBN T 31 010 : 1988 | Identical |
| SANS 11817 : 2ED 2011 | Identical |
| DIN 53521:1987-11 | Corresponds |
| BS 903-A16:1987 | Identical |
| NBN ISO 1817 : 2003 | Identical |
| UNI 8313 : 1993 | Similar to |
| DIN EN 16473:2015-03 | Firefighters helmets - Helmets for technical rescue |
| I.S. EN 60811-404:2012 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: MISCELLANEOUS TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS (IEC 60811-404:2012 (EQV)) |
| CEI EN 60068-2-74 : 2000 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST XC: FLUID CONTAMINATION |
| BS EN ISO 13590:2003 | Small craft. Personal watercraft. Construction and system installation requirements |
| 08/30195225 DC : 0 | BS EN 60684-3-283 ED.1 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 283: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, FOR BUS-BAR INSULATION |
| I.S. EN 2848:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 80 IRHD |
| CEI 18-49 : 2013 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 350: GENERAL CONSTRUCTION AND TEST METHODS OF POWER, CONTROL AND INSTRUMENTATION CABLES FOR SHIPBOARD AND OFFSHORE APPLICATIONS |
| 05/30106456 DC : DRAFT AUG 2005 | IEC 62282-6 - FUEL CELL TECHNOLOGIES - PART 6-1: MICRO FUEL CELL POWER SYSTEMS - SAFETY |
| 05/30135987 DC : 0 | EN 161 - AUTOMATIC SHUT-OFF VALVES FOR GAS BURNERS AND GAS APPLIANCES |
| 15/30313602 DC : 0 | BS ISO 25649-7 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
| BS ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification |
| SAE J 2006 : 2013 | MARINE EXHAUST HOSE |
| ISO 13591:1997 | Small craft Portable fuel systems for outboard motors |
| API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
| BS EN ISO 1825:2017 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification |
| SAE MS 1010 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE T TURBINE OILS - SPECIFICATION |
| I.S. EN 2846:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 60 IRHD |
| BS EN 343 : 2003 | PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
| BS EN 60684-3-233:2006 | Flexible insulating sleeving Specifications for individual types of sleeving - Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| BS ISO 4141-2:2006 | Road vehicles. Multi-core connecting cables Test methods and requirements for high performance sheathed cables |
| BS ISO 13591:1997 | Small craft. Portable fuel systems for outboard motors |
| BS EN 60903:2003 | Live working. Gloves of insulating material |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| 03/316256 DC : DRAFT OCT 2003 | EN ISO 8469 - SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES |
| UNE-EN ISO 6185-4:2012 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| I.S. EN 13765:2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| 93/712290 DC : DRAFT AUG 93 | EN 2379 AEROSPACE SERIES. FLUIDS FOR ASSESSMENT OF NON-METALLIC MATERIALS |
| NF EN 60684 3 229 : 2003 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 229: HEAT-SHRINKABLE SEMI-FLEXIBLE, POLYVINYLIDENE FLUORIDE SLEEVING, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| 99/123581 DC : DRAFT OCT 1999 | ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS |
| 02/705544 DC : DRAFT APR 2002 | BS EN ISO 10297 - TRANSPORTABLE GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| BS EN 2842:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 70 IRHD |
| 11/30252278 DC : 0 | BS EN 855 - PLASTIC HOSES AND HOSE ASSEMBLIES - THERMOPLASTICS TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| DIN ISO 175:1989-04 | PLASTICS - DETERMINATION OF THE EFFECTS OF LIQUID CHEMICALS, INCLUDING WATER |
| 11/30238916 DC : 0 | BS ISO 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| BS EN 2845:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 50 IRHD |
| 12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| BS 2G 230:1991 | Specification for general requirements for aircraft electrical cables (second series) |
| 15/30295398 DC : 0 | BS EN 12081 - RAILWAY APPLICATIONS - AXLEBOXES - LUBRICATING GREASES |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| BS EN 28028:1993 | Rubber and/or plastics hose assemblies for airless paint spraying. Specification |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| BS EN 4641-100:2015 | Aerospace series. Cables, optical 125 μm diameter cladding Tight structure 62,5/125 μm core GI fibre 1,8 mm outside diameter. Product standard |
| 14/30290411 DC : 0 | BS EN 13765:2010/A1 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| 07/30175157 DC : DRAFT DEC 2007 | BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER BASED FLUIDS - SPECIFICATION |
| BS ISO 22902-7:2006 | Road vehicles. Automotive multimedia interface Physical specification |
| 16/30346516 DC : 0 | BS EN 4708-106 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 106: LIMITED FIRE HAZARD SLEEVING - TEMPERATURE RANGE -30 DEGREES C TO 105 DEGREES C - PRODUCT STANDARD |
| BS ISO 24453:2008 | Rubber. Acquisition and presentation of comparable single-point data |
| I.S. EN 12078:1999 | ZERO GOVERNORS FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| BS EN 16678:2015 | Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| 05/19991670 DC : 0 | EN 3826 - AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 70 IRHD |
| 01/122577 DC : DRAFT JUNE 2001 | BS EN 1765 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES |
| 15/30301522 DC : 0 | BS ISO 13775-2 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 2: PETROLEUM-BASED-FUEL APPLICATIONS |
| NF EN 14225-2 : 2005 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| CSA E79.18 : 1995 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ENCAPSULATION "M" |
| BS EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| I.S. EN 50569:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS |
| BS EN 60684-3-343 to 345:2002 | Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated |
| VDE 0212-2 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| 11/30242387 DC : 0 | BS EN 2836 - HEAT RESISTANT POLYCHLOROPRENE RUBBER (CR) - HARDNESS GRADE 50 - CHARACTERISTICS |
| 15/30320874 DC : 0 | BS EN 2566 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 70 IRHD |
| 14/30293500 DC : 0 | BS EN 14225-3 - DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT SYSTEMS AND COMPONENTS - REQUIREMENTS AND TEST METHODS |
| ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification |
| UNE-EN 13765:2010 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
| DEFSTAN 59-97/2(1983) : LATEST | HEAT SHRINKABLE INSULATION SLEEVING FOR USE IN ELECTRICAL AND MECHANICAL APPLICATIONS |
| UNI EN 3698 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 70 IRHD |
| 08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| 96/201078 DC : DRAFT FEB 1996 | IEC 60684-3-217 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 217: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, FLAME RETARDED, SHRINK RATIO 3:1 |
| NF EN 50416 : 2005 AMD 1 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES |
| DIN ISO 13226:2015-12 | Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011) |
| NF ISO 4141-1 : 2000 | ROAD VEHICLES - MULTICORE CONNECTING CABLES - PART 1: TEST METHODS AND REQUIREMENTS FOR BASIC PERFORMANCE SHEATHED CABLES |
| BS EN 61112:2009 | Live working. Electrical insulating blankets |
| BS AU 180-5:1983 | Brake linings Method for determining resistance to water, saline solution, oil and brake fluid of brake lining material |
| ISO 2928:2003 | Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification |
| 13/30290552 DC : 0 | BS EN 4691-1 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| 09/30194969 DC : 0 | BS ISO 11237 - RUBBER HOSES AND HOSE ASSEMBLIES - COMPACT WIRE-BRAID REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| ISO 4639-2:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels |
| 16/30340979 DC : 0 | BS EN 2567 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 80 IRHD |
| BS EN 3827:2014 | Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 80 IRHD |
| 12/30243465 DC : 0 | BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| BS EN 2837:2012 | Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 60 IRHD |
| BS EN 2836:2012 | Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 50 IRHD |
| 90/76926 DC : 0 | PREN 3101 - DRAFT EUROPEAN STANDARD - AEROSPACE SERIES - TEST METHODS FOR SEALANTS - DETERMINATION OF RESISTANCE TO THERMAL RUPTURE |
| BS ISO 4081:2016 | Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification |
| BS EN 2847:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 70 IRHD |
| 00/560662 DC : DRAFT JAN 2000 | PREN 13832 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS |
| BS EN 16473:2014 | Firefighters helmets. Helmets for technical rescue |
| 13/30276381 DC : 0 | BS ISO 3601-5 - FLUID POWER SYSTEMS - O-RINGS - PART 5: SPECIFICATION OF ELASTOMERIC MATERIALS FOR INDUSTRIAL APPLICATIONS |
| BS ISO 8066-2:2001 | Rubber and plastics hoses and hose assemblies for automotive air conditioning. Specification Refrigerant 134a |
| DIN EN 13832-2:2006-11 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| 03/311277 DC : DRAFT JAN 2004 | ISO 3862-2 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
| CSA 6.32:2012 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| DIN 65074:1999-03 | AEROSPACE - ADHESIVE FILMS AND PRIMERS FOR STRUCTURAL ASSEMBLIES - TECHNICAL SPECIFICATION |
| 15/30317657 DC : 0 | BS EN ISO 2398 - RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
| 13/30266235 DC : 0 | BS ISO 17325-1 - SHIPS AND MARINE TECHNOLOGY - MARINE ENVIRONMENT PROTECTION - OIL BOOMS - PART 1: DESIGN REQUIREMENTS |
| 15/30315879 DC : 0 | BS ISO 12619-2:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| BS EN ISO 18752:2016 | Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification |
| 11/30242407 DC : 0 | BS EN 2849 - FUEL AND SYNTHETIC OIL RESISTANT ACRYLONITRILE-BUTADIENERUBBER (NBR) - HARDNESS GRADE - CHARACTERISTICS |
| 11/30249223 DC : 0 | BS EN 50570 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| BS ISO 12046:2012 | Synchronous belt drives. Automotive belts. Determination of physical properties |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| BS EN 2843:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 80 IRHD |
| 15/30320914 DC : 0 | BS EN 4708-104 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 104: SEMI-RIGID POLYVINYLIDENE FLUORIDE - TEMPERATURE RANGE -55 DEGREES C AND 175 DEGREES C |
| DIN EN 16820 E : 2017 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
| 05/30129301 DC : DRAFT FEB 2005 | ISO/DIS 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-REINFORCED CONSTANT-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| I.S. EN 4641-100:2015 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 100: TIGHT STRUCTURE 62,5/125 [MU]M CORE GI FIBRE 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| BS EN 2839:2013 | Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 80 IRHD |
| 12/30247145 DC : 0 | BS ISO 7840 - SMALL CRAFT - FIRE-RESISTANT FUEL HOSES |
| BS 6066:1981 | Specification for thermoplastics hoses for compressed air |
| BS EN 60684-3-211:2007 | Flexible insulating sleeving Specifications for individual types of sleeving - Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 |
| BS ISO 24454:2008 | Rubber. Acquisition and presentation of comparable multi-point data |
| DIN EN ISO 3821:2016-10 (Draft) | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| BS EN 60684-3.246 : 2007 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 246: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED |
| 99/104927 DC : DRAFT JUN 1999 | PREN 13618 - WATER SUPPLY, FLEXIBLE HOSES (METALLIC AND ELASTOMERIC MATERIALS) - SPECIFICATION AND TEST METHODS |
| BS ISO 1436:2017 | Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification |
| PREN 13483 : DRAFT 2011 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| ANSI LC 4:2012 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| BS ISO 9631:2018 | Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material |
| PREN 2379 : 200P1 | AEROSPACE SERIES - FLUIDS FOR ASSESSMENT OF NON-METALLIC MATERIALS |
| 07/30175126 DC : DRAFT DEC 2007 | BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| ISO 3949:2009 | Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification |
| BS ISO 13628-10 : 2005 AMD 16775 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| BS EN 60684-3-229:2003 | Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| CSA ISO/IEC 10373-1 : 2007 : INC : AMD 1 : 2014 : R2017 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| CEI EN 60335-2-108 : 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-108: PARTICULAR REQUIREMENTS FOR ELECTROLYSERS |
| PREN 3102 : 200P1 | AEROSPACE SERIES - SEALANTS - TEST METHODS - DETERMINATION OF LOW-TEMPERATURE FLEXIBILITY |
| CSA C22.2 No. 60079.0 : 2015 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| I.S. EN 2844:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 90 IRHD |
| UNI EN 15649-7 : 2010 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
| UNI 7140 : 2013 | GAS APPLIANCES FOR DOMESTIC USE - NON-METALLIC FLEXIBLE HOSES FOR GAS APPLIANCES FOR DOMESTIC USE AND SIMILAR |
| BS EN 60684-3-165:2004 | Flexible insulating sleeving. Specifications for individual types of sleeving Extruded Polyolefin, flame retarded, limited fire hazard sleeving |
| 03/312144 DC : DRAFT JULY 2003 | ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
| BS ISO 18752 : 2014 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| UNI EN ISO 23936-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| PREN 2837 : 200P1 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 60 IRHD |
| PREN 2846 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 60 IRHD |
| UNE-ISO 6722-1:2013 | Road vehicles. 60 V and 600 V single-core cables. Part 1: Dimensions, test methods and requirements for copper conductor cables |
| CSA ISO/IEC 10373-1:2007 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| PREN 2567 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 80 IRHD |
| DIN EN 13832-3:2006-11 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| PREN 14225-2 : DRAFT 2014 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| PREN 2796 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - LOW COMPRESSION SET - HARDNESS 60 IRHD |
| PREN 2568 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 90 IRHD |
| PREN 2795 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - LOW COMPRESSION SET - HARDNESS 50 IRHD |
| BS EN 60684-3-216 : 2005 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 216: HEAT-SHRINKABLE, FLAME-RETARDED, LIMITED-FIRE HAZARD SLEEVING |
| PREN 4708-101 : DRAFT 2015 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 101: POLYOLEFIN SLEEVING - OPERATING TEMPERATURES -55 DEGREES C TO 135 DEGREES C - PRODUCT STANDARD |
| PREN 2836 : 200P1 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 50 IRHD |
| PREN 2843 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 80 IRHD |
| PREN 2847 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 70 IRHD |
| PREN 3747 : 200P1 | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| ISO 7076-3:2016 | Fire protection Foam fire extinguishing systems Part 3: Medium expansion foam equipment |
| PREN 3826 : DRAFT 2006 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 70 IRHD |
| PREN 3909 : 200P3 | AEROSPACE SERIES - TEST FLUIDS FOR ELECTRICAL AND OPTICAL COMPONENTS AND SUB-ASSEMBLIES |
| PREN 2845 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 50 IRHD |
| PREN 3698 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 70 IRHD |
| PREN 2841 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 60 IRHD |
| PREN 4708-104 : DRAFT 2016 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 104: SEMI-RIGID POLYVINYLIDENE FLUORIDE (PDVF) - OPERATING TEMPERATURE -55 DEGREES C TO 175 DEGREES C - PRODUCT STANDARD |
| PREN 2840 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 50 IRHD |
| BS ISO 13226:2011 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| PREN 4054 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - SEALS IN FLUOROCARBON RUBBER AND ARMATURE IN ALUMINIUM ALLOY - TECHNICAL SPECIFICATION |
| PREN 3475-411 : 200P2 | AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 411: RESISTANCE TO FLUIDS |
| BS EN 50570:2013 | Household and similar electrical appliances. Safety. Particular requirements for commercial electric tumble dryers |
| API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
| I.S. EN 334:2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| PREN 855 : DRAFT 2011 | PLASTICS HOSES AND HOSE ASSEMBLIES - THERMOPLASTICS TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| I.S. EN 343:2003 | PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
| ISO 20057:2017 | Rubber household gloves — General requirements and test methods |
| CEI EN 50569 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS |
| ISO 4639-1:1987 | Rubber tubing and hoses for fuel circuits for internal combustion engines Specification Part 1: Conventional liquid fuels |
| CEI EN 60684-3-228 : 2005 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 228: HEAT-SHRINKABLE, SEMI-RIGID POLYVINYLIDENE FLUORIDE SLEEVING, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| I.S. EN 3733-001:2009 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| NF EN ISO 6185-2 : 2002 | INFLATABLE BOATS - PART 2: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 4,5 KW TO 15 KW INCLUSIVE |
| I.S. EN 50570:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| ISO 1823:2015 | Rubber hose and hose assemblies for oil suction and discharge service Specification |
| I.S. EN 60684-3-217:2000 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 217: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, FLAME RETARDED SHRINK RATIO 3:1 |
| I.S. EN 16603-35-10:2014 | SPACE ENGINEERING - COMPATIBILITY TESTING FOR LIQUID PROPULSION COMPONENTS, SUBSYSTEMS AND SYSTEMS |
| I.S. EN ISO 14903:2017 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS (ISO 14903:2017) |
| BS EN 60335-2-75 : 2004 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| ISO 14469-3:2006 | Road vehicles Compressed natural gas (CNG) refuelling connector Part 3: 25 MPa (250 bar) connector |
| BS EN 60335-2-7 : 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES |
| DIN EN ISO 3949:2016-08 (Draft) | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| ISO/IEC 10373-1:2006 | Identification cards Test methods Part 1: General characteristics |
| UNE-EN 15649-7:2010 | Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices |
| I.S. EN 62282-6-100:2010 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010 (EQV)) |
| I.S. EN 4708-104:2017 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 104: SEMI-RIGID POLYVINYLIDENE FLUORIDE (PDVF) - OPERATING TEMPERATURE -55 DEGREES C TO 175 DEGREES C - PRODUCT STANDARD |
| NF ISO 13226 : 2011 | RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
| ISO/IEC 80079-38:2016 | Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines |
| ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification |
| UNE-EN 16678:2016 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| BS EN 60684-3-212:2006 | Flexible insulating sleeving Specifications for individual types of sleeving - Heat-shrinkable polyolefin sleevings |
| UNE-IEC 60092-360:2015 | Electrical installations in ships - Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables |
| SAE MS 1001 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION |
| EN 14225-2:2017 | Diving suits - Part 2: Dry suits - Requirements and test methods |
| I.S. EN ISO 14469:2017-10 | ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) REFUELLING CONNECTOR (ISO 14469:2017) |
| UNE-EN ISO 6185-3:2015 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| BS EN ISO 21487 : 2012 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS |
| BS EN 14225-2:2017 | Diving suits Dry suits. Requirements and test methods |
| 16/30334287 DC : 0 | BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
| I.S. EN 60684-3-248:2007 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 248: GENERAL PURPOSE, HEAT-SHRINKABLE, DUAL WALL POLYOLEFIN SLEEVING, FLAME RETARDED, SHRINK RATIOS 2:1, 3:1, 4:1 |
| 17/30354654 DC : 0 | BS EN 343 - PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
| EN 13765:2010+A1:2015 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
| 17/30359554 DC : 0 | BS EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS |
| NF ISO 3808 : 2003 | ROAD VEHICLES - UNSCREENED HIGH-VOLTAGE IGNITION CABLES - GENERAL SPECIFICATIONS, TEST METHODS AND REQUIREMENTS |
| DIN EN ISO 6185-3:2014-12 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| UNI EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| BS EN 50569:2013 | Household and similar electrical appliances. Safety. Particular requirements for commercial electric spin extractors |
| UNI EN 343 : 2008 | PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
| DIN EN 334:2016-05 (Draft) | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| DIN EN ISO/IEC 80079-38:2012-08 (Draft) | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
| I.S. EN 60684-3-216:2005 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 216: HEAT-SHRINKABLE, FLAME-RETARDED, LIMITED-FIRE HAZARD SLEEVING |
| I.S. EN ISO 3821:2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN 60684-3-212:2006 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 212: HEAT-SHRINKABLE POLYOLEFIN SLEEVINGS |
| I.S. EN ISO 9539:2010 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010) |
| UNE-EN 16436-1:2014 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| ISO 14469-1:2004 | Road vehicles Compressed natural gas (CNG) refuelling connector Part 1: 20 MPa (200 bar) connector |
| NFPA 1953 : 2016 | PROTECTIVE ENSEMBLES FOR CONTAMINATED WATER DIVING |
| ISO/IEC 10373:1993 | Identification cards Test methods |
| I.S. EN 14382:2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| UNE-EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| DIN EN 14241-1:2013-11 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| DIN EN ISO 11114-2:2013-07 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013); German version EN ISO 11114-2:2013 |
| DIN EN 13483:2013-09 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| DIN EN 26:2015-08 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| DIN EN ISO 11403-3 E : 2002 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014) |
| DIN EN 14382 E : 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 297:1994 | Gas-fired central heating boilers. Type B<sub>11</sub> and B<sub>11BS</sub> boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW |
| BS EN 3909:2016 | Aerospace series. Test fluids and test methods for electrical and optical components and sub-assemblies |
| BS EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements |
| BS EN 849:1997 | Transportable gas cylinders. Cylinder valves. Specification and type testing |
| UNE-EN ISO 175:2011 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| BS EN 3747:2007 | Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification |
| BS EN 12806:2003 | Automotive liquefied petroleum gas components. Other than containers |
| BS EN 1765:2004 | Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
| BS EN 559:2003 | Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
| BS EN 681-2:2000 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers |
| BS EN ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam. Specification |
| BS EN 877 : 1999 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| UNE-EN 60335-2-7:2010 | Household and similar electrical appliances - Safety -- Part 2-7: Particular requirements for washing machines |
| UNE-EN ISO 10088:2017 | Small craft - Permanently installed fuel systems (ISO 10088:2013) |
| BS EN 13913:2003 | Railway applications. Rubber suspension components. Elastomer-based mechanical parts |
| BS EN 14241-1:2013 | Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods Seals in flue liners |
| UNE-ISO 4141-1:2016 | Road vehicles. Multi-core connecting cables. Part 1: Test methods and requirements for basic performance sheathed cables |
| BS EN 14382 : 2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| UNE-EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| BS EN ISO 6807:2003 | Rubber hoses and hose assemblies for rotary drilling and vibration applications. Specifications |
| BS EN 857:2015 | Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification |
| BS EN ISO 5774:2016 | Plastics hoses. Textile-reinforced types for compressed-air applications. Specification |
| BS EN 681-1:1996 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
| BS EN 13597:2003 | Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs |
| BS EN ISO 11403-3:2014 | Plastics. Acquisition and presentation of comparable multipoint data Environmental influences on properties |
| I.S. EN 854:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| DIN EN 1361:1997-08 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| DIN EN ISO 6808:2000-11 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
| I.S. EN 4054:2005 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - SEALS IN FLUOROCARBON RUBBER AND ARMATURE IN ALUMINIUM ALLOY - TECHNICAL SPECIFICATION |
| I.S. EN 3909:2016 | AEROSPACE SERIES - TEST FLUIDS AND TEST METHODS FOR ELECTRIC COMPONENTS AND SUB-ASSEMBLIES |
| I.S. EN 89:2015 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| DIN EN 13787:2002-04 | ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 877:2000 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN ISO 20344:2011 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
| EN 61479:2001/A1:2002 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| EN 61112:2009 | Live working - Electrical insulating blankets |
| EN 60811-404:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
| EN 60684-3-229:2003 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| EN 61111 : 2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| DIN EN 14879-4:2008-01 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 12078:1998 | Zero governors for gas burners and gas burning appliances |
| EN ISO 11114-2:2013 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) |
| EN 60684-3-272:1998 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 272: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1, thin wall |
| EN 12081:2017 | Railway applications - Axleboxes - Lubricating greases |
| EN 60684-3-228:2004 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| EN 60684-3-211:2007 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 |
| EN 12806:2003 | Automotive liquefied petroleum gas components - Other than containers |
| UNI EN 877 : 2007 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 1123-1:1999/A1:2004 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL |
| EN 60684-3-218:1998 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 218: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:1 |
| EN 60684-3-271:2011 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1 |
| DIN EN ISO 175:2011-03 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| EN 62329-3-101 : 2010 | HEAT-SHRINKABLE MOULDED SHAPES - PART 3: SPECIFICATION REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 101: HEAT-SHRINKABLE MOULDED SHAPES, POLYOLEFIN, SEMI-RIGID, LIMITED FIRE HAZARD, MATERIAL REQUIREMENTS AND SYSTEM PERFORMANCE |
| EN 60335-2-108 : 2008 | Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers |
| DIN EN 559:2003-08 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| DIN EN 15502-2-1:2017-09 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW (includes Amendment 1:2016) |
| EN 877:1999/A1:2006/AC:2008 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| UNI EN ISO 11114-2 : 2013 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 2: NON-METALLIC MATERIALS |
| EN 50014:1997/A2:1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| EN 50570:2013/A1:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| DIN EN 853:2016-09 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| DEFSTAN 60-1(PT3)/2(1996) : 1996 | CABLES, FIBRE OPTIC - PART 3: CABLES, FIBRE OPTIC, (EXTERNAL) FOR TACTICAL FIELD DEPLOYMENT (LAND SYSTEMS) |
| NBR 15880 : 2010 | DUCTILE IRON FITTINGS AND ACCESSORIES FOR PIPES OF PVC 6,3 AND POLIETILENE PE - REQUIREMENTS |
| DEFSTAN 61-12(PT26)/3(2001) : 2001 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 26: WIRES AND CABLES ELECTRICAL, DUAL EXTRUDED INSULATION TYPE OLEFIN/VINYLIDEN-FLUORIDE AND SCREENED AND JACKETED - SECTIONAL SPECIFICATION |
| DEFSTAN 60-1(PT0)/1(1992) : 1992 | CABLES, FIBRE OPTIC - GENERAL REQUIREMENTS AND TEST METHODS FOR QUALIFICATION APPROVAL AND CAPABILITY APPROVAL |
| NBR 15803 : 2010 ERRATA 2010 | PRESSURIZED BURIED SYSTEMS FOR WATER DISTRIBUTION AND SEWER - REQUIREMENTS FOR MECHANICAL JOINT COMPRESSION FITTINGS, BRANCH SADDLES AND TAPPING TEE FOR POLYETHYLENE (PE) PIPES FOR NOMINAL OUTSIDE DIAMETERS BETWEEN 20 MM AND 160 MM, WITH MAXIMUM OPERATION PRESSURE UP TO 1.6 MPA |
| DEFSTAN 61-12(PT0)/3(2011) : 2011 | WIRES, CORDS AND CABLES ELECTRICAL METRIC UNITS - PART 0: GENERAL REQUIREMENTS AND TEST METHODS GENERIC SPECIFICATION |
| DEFSTAN 59-97/3(1990) : AMD 1 | HEAT SHRINKABLE INSULATION MATERIALS - GENERAL REQUIREMENTS, TESTS AND TEST METHODS FOR CAPABILITY APPROVAL |
| DEFSTAN 61-12(PT0)/2(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 0: GENERAL REQUIREMENTS AND TEST METHODS - GENERAL SPECIFICATION |
| DEFSTAN 59-71(PT1)/2(1993) : 1993 | CRIMPED ELECTRICAL CONNECTORS FOR COPPER CONDUCTORS - PART 1: GENERAL REQUIREMENTS |
| DEFSTAN 60-1(PT0)/2(2000) : 2000 | CABLES, FIBRE OPTIC - PART 0: GENERAL REQUIREMENTS AND TEST METHODS |
| DEFSTAN 61-12(PT33)/5(2005) : 2005 | WIRES, CORDS AND CABLES ELECTRICAL - PART 33: AIRFRAME WIRES AND CABLES IN THE TEMPERATURE CATEGORIES OF 135 DEGREES C, 200 DEGREES C AND 260 DEGREES C |
| DEFSTAN 61-12(PT33)/4(2001) : 2001 AMD 4 2004 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 33: AIRFRAME WIRES AND CABLES IN THE TEMPERATURE CATEGORIES OF 135 DEGREES C, 150 DEGREES C, 200 DEGREES C AND 260 DEGREES C - SECTIONAL SPECIFICATION |
| DEFSTAN 59-71/1(1988) : 1988 AMD 1 1990 | CRIMPED ELECTRICAL CONNECTIONS FOR COPPER CONDUCTORS - GENERIC SPECIFICATION |
| NBR 15750 : 2009 | PVC-O (ORIENTED UNPLASTICISED POLYVINYL CHLORIDE) PIPING SYSTEMS FOR THE CONVEYANCE OF WATER OR SEWAGE UNDER PRESSURE - REQUIREMENTS AND TEST METHODS |
| DEFSTAN 59-15(PT1)/3(1990) : 1990 CORR | ELASTOMERIC INSULATING MATERIALS AND POLYTETRAFLUOROETHYLENE (PTFE) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST METHODS FOR QUALIFICATION APPROVAL |
| ASME BPE : 2016 | BIOPROCESSING EQUIPMENT |
| I.S. EN 60335-2-7:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES |
| BS EN 60068-2-74:2000 | Environmental testing. Test methods Test Xc: Fluid contamination |
| BS EN ISO 14469:2017 | Road vehicles. Compressed natural gas (CNG) refuelling connector |
| BS ISO 4639-2:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxygenated fuels |
| 12/30276397 DC : 0 | BS ISO/IEC 18745-1 - TEST METHODS FOR MACHINE READABLE TRAVEL DOCUMENTS (MRTD) - PART 1: PHYSICAL TEST METHODS FOR PASSPORT BOOKS (DURABILITY) |
| 06/30159832 DC : 0 | BS ISO 10088 - SMALL CRAFT - PERMANENTLY INSTALLED FUEL SYSTEMS |
| DIN EN 15649-7:2010-04 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
| 08/30175867 DC : DRAFT JAN 2008 | BS EN 61111 - LIVE WORKING - ELECTRICAL INSULATING MATTING |
| 07/30170472 DC : DRAFT AUG 2007 | BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| BS EN 61854:1998 | Overhead lines. Requirements and tests for spacers |
| CEI EN 60684-3-248 : 2008 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 248: GENERAL PURPOSE, HEAT-SHRINKABLE, DUAL WALL POLYOLEFIN SLEEVING, FLAME RETARDED, SHRINK RATIOS 2:1, 3:1, 4:1 |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| BS ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures |
| UNE-EN 16643:2017 | Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification |
| I.S. EN 2838:2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 70 IRHD |
| 11/30249083 DC : 0 | BS EN 60335-2-58:2005/FP - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES |
| ISO 1436-1:2001 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| 05/30110749 DC : DRAFT SEP 2005 | ISO/IEC 10373-1 - IDENTIFICATION CARDS - PART 1: GENERAL CHARACTERISTICS |
| ISO 4925:2005 | Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems |
| 07/30161895 DC : 0 | BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 16084:2011 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| 13/30283194 DC : 0 | BS EN 4708-101 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 101: POLYOLEFIN SLEEVING |
| 10/30218935 DC : 0 | BS EN 15502-2-1 - GAS-FIRED HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B[2], B[3] AND B[5] APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| PREN 857 : DRAFT 2011 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| I.S. EN 483:2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| BS EN 2848:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 80 IRHD |
| 99/716445 DC : DRAFT NOV 99 | AUTOMOTIVE LPG FILLING SYSTEM - PART 1: DIMENSIONS AND TEST REQUIREMENTS FOR THE CONNECTOR |
| 11/30242392 DC : 0 | BS EN 2840 - MINERAL OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 50 - CHARACTERISTICS |
| BS ISO 3601-5:2015 | Fluid power systems. O-rings Specification of elastomeric materials for industrial applications |
| ISO 5772:2015 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification |
| 18/30347942 DC : DRAFT APR 2018 | BS ISO 20766-9 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 9: PRESSURE RELIEVE DEVICE (PRD) |
| 03/311096 DC : DRAFT DEC 2003 | ISO 4079-2 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
| 11/30219041 DC : DRAFT APR 2011 | BS ISO 14903 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| 08/30195213 DC : 0 | BS EN 60684-3-280 ED.1 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 280: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, ANTI-TRACKING |
| BS 3G 198-3:1994 | Sleeves for aircraft electric cables and equipment wires Specification for heat-shrinkable sleeving for binding, insulation and identification |
| BS EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods |
| 15/30304603 DC : 0 | BS EN 50066 - MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| PREN 681-1 : DRAFT 2016 | ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| BS EN 60335-2-108:2008 | Household and similar electrical appliances. Safety Particular requirements for electrolysers |
| 16/30338439 DC : 0 | BS EN ISO 14903 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| BS EN 3825:2014 | Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 60 IRHD |
| 98/716719 DC : DRAFT NOV 1998 | ROAD VEHICLES - FUSES - PART 3: FUSE-LINKS WITH TABS (BLADE TYPE) |
| 07/30156264 DC : 0 | BS ISO 8820-1 - ROAD VEHICLES - FUSE-LINKS - PART 1: DEFINITIONS AND GENERAL TEST REQUIREMENTS |
| 17/30347933 DC : 0 | BS ISO 20766-4 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEM COMPONENTS - PART 4: LEVEL INDICATOR |
| BS ISO 3384-2:2012 | Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression Testing with temperature cycling |
| 16/30342317 DC : 0 | BS EN 4708-102 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 102: VERY FLEXIBLE POLYMER - TEMPERATURE RANGE -75 DEGREES C TO 150 DEGREES C - PRODUCT STANDARD |
| SAE MS 1002 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE C (GEARS) SPECIFICATION |
| BS EN 60811-404:2012 | Electric and optical fibre cables. Test methods for non-metallic materials Miscellaneous tests. Mineral oil immersion tests for sheaths |
| 11/30242400 DC : 0 | BS EN 2845 - FUEL AND SYNTHETIC OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 50 - CHARACTERISTICS |
| BS ISO 5772:2015 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
| 06/30146125 DC : 0 | EN 12115 - RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| 16/30335320 DC : 0 | BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| I.S. EN 16084:2011 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| ISO 1825:2017 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification |
| 16/30348774 DC : 0 | BS EN 60068-2-74 ED 1.0/A1 - ENVIRONMENTAL TESTING - PART 2: TESTS - TEST XC: FLUID CONTAMINATION |
| 03/111126 DC : DRAFT JULY 2003 | PREN 60335-2-75 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| 03/301511 DC : DRAFT JAN 2003 | ISO 4141-1 - ROAD VEHICLES - MULTICORE CONNECTING CABLES - PART 1: TEST METHODS AND REQUIREMENTS FOR BASIC PERFORMANCE SHEATHED CABLES |
| I.S. EN 2837:2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 60 IRHD |
| NF EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| 11/30231429 DC : 0 | BS ISO 3384-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 2: WITH TEMPERATURE CYCLING |
| BS ISO 6722-1:2011 | Road vehicles. 60 V and 600 V single-core cables Dimensions, test methods and requirements for copper conductor cables |
| 16/30340981 DC : 0 | BS EN 2795 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 50 IRHD |
| 08/30175871 DC : DRAFT JAN 2008 | BS EN 61112 - LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| UNE-ISO 3384-1:2017 | Rubber, vulcanize or thermoplastic. Determination of stress relaxation in compression. Part 1: Testing at constant temperature |
| 14/30266729 DC : 0 | BS ISO 17324 - RUBBER HOSES FOR AUTOMOTIVE TURBOCHARGERS - SPECIFICATION |
| 01/122581 DC : DRAFT JUNE 2001 | BS PREN 1361 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| BS ISO 2398 : 1995 AMD 9704 | RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
| 12/30247148 DC : 0 | BS ISO 8469 - SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES |
| BS 3456-202.7(1991) : 1991 | SPECIFICATION FOR SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS - WASHING MACHINES |
| XP PREN 3747 : 1995 XP | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| 04/30095730 DC : DRAFT APR 2004 | EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 3: FOOTWEAR HIGHLY PROTECTIVE AGAINST CHEMICALS |
| 09/30198650 DC : DRAFT JAN 2009 | BS EN 62329-3-102 - HEAT SHRINKABLE MOULDED SHAPES - PART 3: SPECIFICATION REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 102: HEAT-SHRINKABLE ELASTOMERIC MOULDED SHAPES, SEMI-RIGID, MATERIAL REQUIREMENTS AND SYSTEM PERFORMANCE |
| 11/30252281 DC : 0 | BS EN 856 - HOSE AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| 16/30335329 DC : 0 | BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| 12/30258801 DC : 0 | BS EN 60335-2-5 ED 6 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-5: PARTICULAR REQUIREMENTS FOR DISHWASHERS |
| BS EN 4708-101:2017 | Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification Polyolefin sleeving. Operating temperatures -55 °C to 135 °C. Product standard |
| 14/30301115 DC : 0 | BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
| 05/30111735 DC : DRAFT APR 2005 | ISO 4141-2 - ROAD VEHICLES - MULTI-CORE CABLES - PART 2: TEST METHODS AND REQUIREMENTS FOR HIGH PERFORMANCE SHEATHED CABLES |
| CSA 8.5 : 2012 | GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
| DIN EN ISO 10088:2013-12 | Small craft - Permanently installed fuel systems (ISO 10088:2013) |
| UNI EN ISO 9539 : 2014 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
| 09/30200146 DC : 0 | BS EN ISO 20344 - PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR |
| 15/30332964 DC : 0 | BS EN 4708-301 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 301: ADHESIVE LINED POLYOLEFIN SLEEVINGS. TEMPERATURE RANGE -55 DEGREES C TO 105 DEGRESS C - PRODUCT STANDARD |
| 10/30167702 DC : 0 | BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION |
| 11/30242389 DC : 0 | BS EN 2837 - HEAT RESISTANT POLYCHLOROPRENE RUBBER (CR) - HARDNESS GRADE 60 - CHARACTERISTICS |
| BS ISO 17194:2007 | Structural adhesives. A standard database of properties |
| BS EN 61479:2001 | Live working. Flexible conductor covers (line hoses) of insulating material |
| 05/30102442 DC : DRAFT JAN 2005 | ISO 6722 - ROAD VEHICLES - 60 V AND 600 V SINGLE CORE CABLES - DIMENSIONS, TEST METHODS AND REQUIREMENTS |
| BS EN 15268:2008 | Petrol filling stations. Safety requirements for the construction of submersible pump assemblies |
| 03/311275 DC : DRAFT DEC 2003 | ISO 1436-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
| 15/30293925 DC : 0 | BS EN ISO 6134 - RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION |
| 11/30250546 DC : 0 | BS EN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| PREN 343 : DRAFT 2017 | PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
| PREN 549 : DRAFT 2017 | RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
| DD ENV 61111:2002 | Matting of insulating material for electrical purposes |
| BS 3G 198-2:1997 | Sleeves for aircraft electric cables and equipment wires Specification for slip-on sleeves for identification purposes |
| CSA 6.32 : 2012 : INC : ADD A : 2012 : R2016 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| ISO 3808:2002 | Road vehicles Unscreened high-voltage ignition cables General specifications, test methods and requirements |
| CEI EN 60684-3-212 : 2006 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 212: HEAT-SHRINKABLE POLYOLEFIN SLEEVINGS |
| CEI EN 62329-3-101 : 2012 | HEAT-SHRINKABLE MOULDED SHAPES - PART 3: SPECIFICATION REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 101: HEAT-SHRINKABLE MOULDED SHAPES, POLYOLEFIN, SEMI-RIGID, LIMITED FIRE HAZARD, MATERIAL REQUIREMENTS AND SYSTEM PERFORMANCE |
| BS EN 60811-2-1:1998 | Insulating and sheathing materials of electric cables. Common test methods. Methods specific to elastomeric compounds Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests |
| CEI EN 61300-2-34 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-34: TESTS - RESISTANCE TO SOLVENTS AND CONTAMINATING FLUIDS OF INTERCONNECTING COMPONENTS AND CLOSURES |
| BS EN 2846:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 60 IRHD |
| PREN 2566 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - HARDNESS 70 IRHD |
| CSA ISO/IEC 10373-1 : 2007 : R2012 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| 04/30117386 DC : DRAFT JUL 2004 | EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| ANSI Z21-101 : 2012 | GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
| 05/19992193 DC : 0 | BS EN 3825 - AEROSPACE SERIES - FLOUROSILICONE RUBBER(FVMQ) - HARDNESS 60 IRHD |
| PREN 14241-1 : DRAFT 2011 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| BS EN 4708-104:2017 | Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification Semi-rigid polyvinylidene fluoride (PDVF). Operating temperature - 55 °C to 175 °C. Product Standard |
| 02/710901 DC : DRAFT SEP 2002 | BS EN ISO 7840 - SMALL CRAFT - FIRE-RESISTANT FUEL HOSES |
| CSA ISO/IEC 10373-1 : 2007 : INC : AMD 1 : 2014 : R201200 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| ISO 12619-2:2014 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS IEC 61111:1992 | Matting of insulating material for electrical purposes |
| BS EN 50465:2015 | European product standard for combined heating power systems using gas fuel |
| I.S. EN ISO 6185-4:2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
| SAE J 2600 : 2015 | Compressed Hydrogen Surface Vehicle Fueling Connection Devices<br> |
| CSA 8.5 : 2012 : R2017 | GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
| BS ISO 16380 : 2014 | ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR |
| BS ISO 4079:2017 | Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification |
| ISO 4081:2016 | Rubber hoses and tubing for cooling systems for internal-combustion engines Specification |
| ISO 6185-1:2001 | Inflatable boats Part 1: Boats with a maximum motor power rating of 4,5 kW |
| NF EN 61854 : 2001 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| PREN 4708-301 : DRAFT 2016 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 301: ADHESIVE LINED POLYOLEFIN SLEEVINGS - OPERATING TEMPERATURE -55 DEGREES C TO 105 DEGREES C - PRODUCT STANDARD |
| NF EN 60684 3 343 TO 345 : 2003 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 343 TO 345: EXPANDABLE BRAIDED ETHYLENE CHLOROTRIFLUOROETHYLENE (E-CTFE) TEXTILE SLEEVING, UNCOATED |
| PREN 4532 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 MICROMETER/280 MICROMETER FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION |
| NF EN 60335-2-7 : 2010 AMD 1 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES |
| BS EN 3475-411:2014 | Aerospace series. Cables, electrical, aircraft use. Test methods Resistance to fluids |
| ISO 6916-2:2001 | Flexible cellular polymeric materials Sponge and expanded cellular rubber products Specification Part 2: Mouldings and extrusions |
| PREN ISO 6185-3 : DRAFT 2013 | INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER (ISO/DIS 6185-3:2013) |
| UNE-ISO 13226:2017 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers. |
| ANSI LC 4 : 2012 : INC : ADD A : 2013 : R2017 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| EN ISO 11403-3:2014 | Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014) |
| DIN EN 16084:2011-07 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| CGA 8.3 : 2015 | THERMOPLASTIC HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS |
| ISO 4079:2017 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types for oil-based or water-based fluids Specification |
| ISO 4141-2:2006 | Road vehicles Multi-core connecting cables Part 2: Test methods and requirements for high performance sheathed cables |
| CEI EN 61111 : 2010 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| PREN 4641-102 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| IEC 60335-2-7:2008 RLV | Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines |
| ONORM EN 334 : JUN 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| PREN 4691-1 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| I.S. EN 60684-3-218:1999 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 218: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, NOT FLAME RETARDED SHRINK RATIO 3:1 |
| UNE-EN 60811-404:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
| BS ISO 3384-1 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATIONIN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
| BS EN ISO 9539 : 2010 | GAS WELDING EQUIPMENT- MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN 3697:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 60 IRHD |
| IEC PAS 62282-6-1:2006 | Fuel cell technologies - Part 6-1: Micro fuel cell power systems - Safety |
| BS EN ISO/IEC 80079-38 : 2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016) |
| ISO 17325-2:2014 | Ships and marine technology Marine environment protection Oil booms Part 2: Strength and performance requirements |
| I.S. EN ISO 13590:2004 | SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
| ISO 23551-1:2012 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| I.S. EN ISO 10088:2017 | SMALL CRAFT - PERMANENTLY INSTALLED FUEL SYSTEMS (ISO 10088:2013) |
| BS EN 15502-2-1 : 2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| CEI EN 50066 : 1997 | MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| CEI EN 61854 : 2000 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017) |
| UNE-EN ISO 8469:2014 | Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) |
| I.S. EN 62329-3-101:2010 | HEAT-SHRINKABLE MOULDED SHAPES - PART 3: SPECIFICATION REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 101: HEAT-SHRINKABLE MOULDED SHAPES, POLYOLEFIN, SEMI-RIGID, LIMITED FIRE HAZARD, MATERIAL REQUIREMENTS AND SYSTEM PERFORMANCE |
| UNI EN 15268 : 2009 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES |
| I.S. EN 16436-1:2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| ISO 15372:2000 | Ships and marine technology — Inflatable rescue boats — Coated fabrics for inflatable chambers |
| I.S. EN 60335-2-108:2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-108: PARTICULAR REQUIREMENTS FOR ELECTROLYSERS |
| I.S. EN 60684-3-246:2007 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 246: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED |
| I.S. EN 60335-2-5:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-5: PARTICULAR REQUIREMENTS FOR DISHWASHERS |
| I.S. EN 50066:1993 | MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES SAFETY REQUIREMENTS FOR RADIO TRANSMITTING EQUIPMENT |
| ISO 4633:2015 | Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
| BS ISO 12619-2 : 2014 | ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| I.S. EN 2847:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 70 IRHD |
| BS EN 50416 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES |
| DIN EN 1762:2016-09 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| UNE 27700:2013 | Systems and equipments to improve the stability and floatability reserve of vessels and floating structrures by inflatable means, in case of water ingress or excessive listing. Requirements and test methods for the flotation modules. |
| I.S. EN 2839:2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 80 IRHD |
| ISO 9940:2015 | Aerospace series Fluid, hydraulic, phosphate ester-base, fire resistant Technical specification |
| ISO 25649-7:2017 | Floating leisure articles for use on and in the water Part 7: Additional specific safety requirements and test methods for Class E devices |
| ISO 8028:2017 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification |
| CEI EN 50570 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| SAE MS 1004 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE H (HYDRAULIC FLUIDS) - SPECIFICATION |
| ISO 6119:2006 | Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) |
| EN ISO/IEC 10373 : 1995 | IDENTIFICATION CARDS - TEST METHODS |
| ISO 6448:1985 | Rubber seals Joint rings used for petroleum product supply pipes and fittings Specification for material |
| ISO 23550:2011 | Safety and control devices for gas burners and gas-burning appliances General requirements |
| I.S. EN ISO 23936-2:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011) |
| ISO 24454:2008 | Rubber Acquisition and presentation of comparable multi-point data |
| BS EN ISO 6185-4:2011 | Inflatable boats Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| EN ISO 21487:2012/A2:2015 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012/AMD 2:2015) |
| IEC 60335-2-75:2012+AMD1:2015 CSV | Household and similar electrical appliances - Safety - Part 2-75:Particular requirements for commercial dispensing appliances and vending machines |
| UNE-EN 50569:2014 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors |
| I.S. EN ISO 12736:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| EN ISO 1825:2017 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017) |
| NF EN 62329-3-102 : 2010 | HEAT SHRINKABLE MOULDED SHAPES - PART 3: SPECIFICATION REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 102: HEAT-SHRINKABLE ELASTOMERIC MOULDED SHAPES, SEMI-RIGID, MATERIAL REQUIREMENTS AND SYSTEM PERFORMANCE |
| EN ISO 8469:2013 | Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) |
| NF EN 60684 3-165 : 2004 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 165: EXTRUDED POLYOLEFIN, FLAME RETARDED, LIMITED FIRE HAZARD SLEEVING |
| EN 50465 : 2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| EN 16436-1:2014+A1:2015 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| EN 13832-2:2006 | Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
| BS EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification |
| EN 14225-3:2017 | Diving suits - Part 3: Actively heated or cooled suit systems and components - Requirements and test methods |
| EN 3475-411:2014 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids |
| IEC 60068-2-74:1999 | Environmental testing - Part 2: Tests - Test Xc: Fluid contamination |
| NF EN 12115 : 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| ISO 4079-1:2001 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| I.S. EN 50465:2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| IEC PAS 62282-6-150:2011 | Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN Devision 4.3) compounds in indirect PEM fuel cells |
| ISO 4930:2006 | Road vehicles Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.) |
| ISO 10088:2013 | Small craft — Permanently installed fuel systems |
| I.S. EN 15268:2008 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES |
| ISO 1823-2:1997 | Rubber hoses and hose assemblies Part 2: Ship/dockside discharge Specification |
| ISO 4632-1:1982 | Rubber, vulcanized Classification Part 1: Description of the classification system |
| DIN EN 877:2010-01 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008) |
| I.S. EN 856:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| NFPA 1952 : 2015 | SURFACE WATER OPERATIONS PROTECTIVE CLOTHING AND EQUIPMENT |
| DIN EN 14879-4 E : 2008 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 4: LININGS ON METALLIC COMPONENTS |
| DIN EN 2259:1995-11 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 50 IRHD |
| DIN EN 2429:1995-11 | AEROSPACE SERIES - ETHYLEN-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 60 IRHD |
| DIN EN 2260:1995-11 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 60 IRHD |
| DIN EN 89:2015-08 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| DIN EN 3050:1998-07 | AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - TECHNICAL SPECIFICATION |
| DIN EN 2431:1995-11 | AEROSPACE SERIES - ETHYLEN-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 80 IRHD |
| DIN EN 2261:1995-11 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 70 IRHD |
| DIN EN ISO 22435:2013-03 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING (ISO 22435:2007 + AMD.1:2012) |
| DIN EN 12081:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - LUBRICATING GREASES |
| IEC 60335-2-7:2008+AMD1:2011+AMD2:2016 CSV | Household and similar electrical appliances - Safety - Part 2-7:Particular requirements for washing machines |
| BS EN 12081:2017 | Railway applications - Axleboxes - Lubricating greases |
| UNE-EN 13799:2012 | LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
| UNE-EN 1765:2017 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| ISO 8092-2:2005 | Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements |
| BS EN 26:1998 | Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners |
| BS EN 334 : 2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| BS EN ISO 20344:2011 | Personal protective equipment. Test methods for footwear |
| 04/30124785 DC : 0 | EN 15069 - SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| UNE-EN ISO 20344:2012 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| EN 61854:1998 | Overhead lines - Requirements and tests for spacers |
| ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam — Specification |
| IEC 60684-3-217:1998 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 217: Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 3:1 |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| UNE-EN ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) |
| BIS IS/IEC 60079-0 : 2011 | EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| DIN EN 681-1:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber |
| I.S. EN 12081:2017 | RAILWAY APPLICATIONS - AXLEBOXES - LUBRICATING GREASES |
| I.S. EN 13483:2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| I.S. EN ISO 20344:2011 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011) |
| DIN EN 88:1996-08 | PRESSURE GOVERNORS FOR GAS APPLIANCES FOR INLET PRESSURES UP TO 200 MBAR |
| DIN EN 1361:2004-10 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| I.S. EN ISO 1401:2016 | RUBBER HOSES FOR AGRICULTURAL SPRAYING (ISO 1401:2016) |
| I.S. EN 13799:2012 | LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS |
| I.S. EN 443:2008 | HELMETS FOR FIRE FIGHTING IN BUILDINGS AND OTHER STRUCTURES |
| EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN ISO 5774:2016 | PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016) |
| DIN EN ISO 7840:2013-12 | SMALL CRAFT - FIRE-RESISTANT FUEL HOSES (ISO 7840:2013) |
| I.S. EN ISO 2398:2016 | RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016) |
| I.S. EN ISO 6807:2004 | RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION |
| I.S. EN 26:2015 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| I.S. EN 12115:2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| DIN EN ISO 2398:2010-04 | RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016) |
| DIN EN 13463-1:2009-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| I.S. EN ISO 14113:2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| DIN EN ISO 3821:2010-07 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN ISO 6134:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017) |
| I.S. EN ISO 8092-2:2006 | ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 2: DEFINITIONS, TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS |
| I.S. EN 14241-1:2013 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| I.S. EN ISO 11403-3:2014 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014) |
| I.S. EN 1360:2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| I.S. EN ISO 11114-2:2013 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 2: NON-METALLIC MATERIALS (ISO 11114-2:2013) |
| I.S. EN 14125:2013 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| I.S. EN 13787:2002 | ELASTOMERS FOR GAS PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| DIN EN 13597:2008-04 | Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| I.S. EN 1765:2016 | RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES |
| I.S. EN 3747:2007 | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| I.S. EN ISO 175:2010 | PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS |
| DIN EN 681-3:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber |
| I.S. EN 853:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| DIN EN 858-1:2002-05 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
| I.S. EN ISO 6808:2014 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
| I.S. EN 857:2015 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| I.S. EN 1375:2002 | IDENTIFICATION CARD SYSTEM - INTERSECTOR INTEGRATED CIRCUIT(S) CARD ADDITIONAL FORMATS - ID-000 CARD SIZE AND PHYSICAL CHARACTERISTICS |
| DIN EN 681-2:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers |
| I.S. EN ISO 6806:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
| VDE 0625-10 : 1994 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| VDE 0341-3-233 : 2006 COR 1 2008 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 233: HEAT-SHRINKABLE, FLUOROELASTOMER SLEEVING, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| ONORM EN 13483 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| NF EN 13799 : 2012 | EQUIPEMENTS ET ACCESSOIRES GPL - JAUGES DE NIVEAU POUR LES RESERVOIRS DE GAZ DE PETROLE LIQUEFIE (GPL) |
| BS 2782-8.830A(1999) : 1999 AMD 13097 | METHODS OF TESTING PLASTICS - OTHER PROPERTIES - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS |
| BS 4749:1991 | Specification for textile reinforced rubber hydraulic hoses and hose assemblies |
| DIN EN 50066 : 1994 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES; MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| I.S. EN 12806:2003 | AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS |
| BS 4832:1987 | Specification for compatibility between elastomeric materials and hydraulic fluids |
| BS 4586:1992 | Specification for spiral wire reinforced rubber covered hydraulic hoses and hose assemblies |
| DIN EN 60684-3-211 : 2008 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 211: HEAT-SHRINKABLE SLEEVING, SEMI-RIGID POLYOLEFIN, SHRINK RATIO 2:1 |
| BS 3832:1991 | Specification for wire reinforced rubber hoses and hose assemblies for hydraulic installations |
| BS 3G 100-2.3.12:1991 | Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions Fluid contamination |
| BS 903-A42:1992 | Physical testing of rubber Method for determination of stress relaxation in compression at ambient and at elevated temperatures |
| ISO 14903:2017 | Refrigerating systems and heat pumps — Qualification of tightness of components and joints |
| DIN EN ISO 9539 E : 2014 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010 + AMD.1:2013) |
| BS 3G 198-4:1996 | Sleeves for aircraft electric cables and equipment wires Specification for fluoropolymer heat shrinkable sleeving for binding and insulation |
| 12/30234431 DC : 0 | BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS |
| BS EN ISO/IEC 10373:1995 | Identification cards. Test methods |
| DIN EN 16678 E : 2016 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUTOFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
| 17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| BS ISO 9940:2015 | Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification |
| 08/30176841 DC : DRAFT JAN 2008 | BS EN 62329-102 - HEAT SHRINKABLE MOULDED SHAPES - PART 3: SPECIFICATION REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 102 - HEAT-SHRINKABLE ELASTOMERIC MOULDED SHAPES, SEMI-RIGID, MATERIAL REQUIREMENTS AND SYSTEM PERFORMANCE |
| NF ISO 4091 : 2004 | ROAD VEHICLES - CONNECTORS FOR THE ELECTRICAL CONNECTION OF TOWING AND TOWED VEHICLES - DEFINITIONS, TESTS AND REQUIREMENTS |
| 13/30290592 DC : 0 | BS EN 6111 - AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD |
| I.S. EN ISO 25649-1:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017) |
| NF EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH AN HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| 10/30196577 DC : 0 | BS ISO 6722-1 - ROAD VEHICLES - 60 V AND 600 V SINGLE-CORE CABLES - PART 1: DIMENSIONS, TEST METHODS AND REQUIREMENTS FOR COPPER CONDUCTOR CABLES |
| PREN 854 : DRAFT 2011 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| CEI EN 50571 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES |
| 15/30291917 DC : 0 | BS ISO 14469 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) REFUELLING CONNECTOR - PART: 20 MPA (200 BAR) CONNECTOR |
| 11/30231856 DC : 0 | BS EN 14125 - THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| BS EN 60684-3-205:2011 | Flexible insulating sleeving Specifications for individual types of sleeving. Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1 |
| DIN EN 16820:2015-03 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
| 15/30317645 DC : 0 | BS EN ISO 6806 - RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION |
| I.S. EN 849:1997 | TRANSPORTABLE GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| 11/30232951 DC : 0 | BS EN ISO 21487 - SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS |
| BS ISO 4141-1:2005 | Road vehicles. Multi-core connecting cables Test methods and requirements for basic performance sheathed cables |
| EN ISO 14469:2017 | Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO 14469:2017) |
| PREN 60335-2-7 : DRAFT 2002 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES |
| BS 6G 205-1:1995 | Secondary batteries for aircraft Specification for lead-acid batteries |
| CEI EN 61112 : 2010 | LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| 15/30313584 DC : 0 | BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| 18/30347939 DC : DRAFT APR 2018 | BS ISO 20766-6 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 6: PRESSURE RELIEF VALVES (PRV) |
| BS ISO 6605:2017 | Hydraulic fluid power. Test methods for hoses and hose assemblies |
| 10/30219184 DC : 0 | BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| 08/30176971 DC : DRAFT JAN 2008 | BS IEC 60684-3-205 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 205 - HEAT-SHRINKABLE CHLORINATED POLYOLEFIN SLEEVING, FLAME RETARDED, NOMINAL SHRINK RATION 1, 7:1 AND 2:1 |
| BS EN ISO 8469:2013 | Small craft. Non-fire-resistant fuel hoses |
| BS EN 2840:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 50 IRHD |
| 12/30265285 DC : 0 | BS EN 16473 - FIREFIGHTERS HELMETS - HELMETS FOR TECHNICAL RESCUE |
| BS EN 2838:2013 | Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 70 IRHD |
| 11/30248966 DC : 0 | BS EN 50416: 2005/FPRAB - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES |
| 11/30242402 DC : 0 | BS EN 2847 - FUEL AND SYNTHETIC OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 70 - CHARACTERISTICS |
| DIN EN 61854 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| I.S. EN 4641-102:2009 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M OUTSIDE DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| ISO 11759:1999 | Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification |
| 04/30112025 DC : DRAFT APR 2004 | ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
| NF EN 62329-3-101 : 2010 | HEAT SHRINKABLE MOULDED SHAPES - PART 3: SPECIFICATION REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 101: HEAT-SHRINKABLE MOULDED SHAPES, POLYOLEFIN, SEMI-RIGID, LIMITED FIRE HAZARD, MATERIAL REQUIREMENTS AND SYSTEM PERFORMANCE |
| 08/30187544 DC : DRAFT OCT 2008 | BS EN 13765 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| DIN EN 1360:2013-09 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 11/30242396 DC : 0 | BS EN 2844 - MINERAL OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 90 - CHARACTERISTICS |
| BS EN 4641-102:2009 | Aerospace series. Cables, optical 125 μm outside diameter cladding Semi-loose 62,5/125 μm GI fibre nominal 1,8 mm outside diameter. Product standard |
| 14/30293497 DC : 0 | BS EN 14225-2 - DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| BS EN 60335-2-58 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES |
| 14/30302298 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| 10/30196881 DC : 0 | BS ISO 6072 - RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS |
| UNI EN 2849 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 90 IRHD |
| 15/30317651 DC : 0 | BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
| BS EN 3826:2014 | Aerospace series. Fluorosilicone rubber (FVMQ). Hardness 70 IRHD |
| DIN EN 344-1:1997-06 | SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE - PART 1: REQUIREMENTS AND TEST METHODS |
| 11/30242401 DC : 0 | BS EN 2846 - FUEL AND SYNTHETIC OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 60 - CHARACTERISTICS |
| PREN 856 : DRAFT 2011 | RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| PREN 13832-2 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS |
| 03/311322 DC : DRAFT JAN 2004 | ISO 11237-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED COMPACT TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
| CEI EN 60684-3-271 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 271: HEAT-SHRINKABLE ELASTOMER SLEEVINGS, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| ISO 8066-1:1997 | Rubber and plastics hoses and hose assemblies for automotive air conditioning Specification Part 1: Refrigerant 12 |
| 05/19991671 DC : 0 | BS EN 3826 - AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 70 IRHD |
| 14/30293931 DC : 0 | BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS |
| BS ISO 20057:2017 | Rubber household gloves. General requirements and test methods |
| BS EN 60684-3-248:2007 | Flexible insulating sleeving. Specifications for individual types of sleeving General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 |
| 05/30127815 DC : DRAFT JAN 2005 | IEC 60684-3-211 ED.3 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING |
| BS ISO 1436-2:2005 | Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types. Specification Water-based fluid applications |
| BS EN 15649-1 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| 16/30334966 DC : 0 | BS EN ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION |
| 16/30341347 DC : 0 | BS EN 2798 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 80 IRHD |
| DIN 72581-3:2001-03 | ROAD VEHICLES - FUSES FOR LOW VOLTAGE INSTALLATIONS - PART 3: BLADE TYPE FUSE LINKS, TYPES C, E AND F |
| BS EN 50571:2013 | Household and similar electrical appliances. Safety. Particular requirements for commercial electric washing machines |
| ISO 4639-3:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels |
| BS EN 13832-3:2006 | Footwear protecting against chemicals Requirements for footwear highly resistant to chemicals under laboratory conditions |
| 16/30350944 DC : 0 | BS EN 4840-101 - AEROSPACE SERIES - HEAT SHRINKABLE MOULDED SHAPES - PART 101: POLYOLEFIN, SEMI-RIGID, LIMITED FIRE HAZARD, TEMPERATURE RANGE -30 TO 105 DEGREES C |
| 17/30341515 DC : 0 | BS ISO 12925-1 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY C (GEARS) - PART 1: SPECIFICATIONS FOR LUBRICANTS FOR ENCLOSED GEAR SYSTEMS |
| BS 3G 230:2000 | Specification for general requirements for aircraft electrical cables (second series) |
| 17/30354707 DC : 0 | BS ISO 19642-2 - ROAD VEHICLES - AUTOMOTIVE CABLES - PART 2: TEST METHODS |
| BS ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels |
| DIN EN 15268 E : 2008 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES |
| 11/30242405 DC : 0 | BS EN 2848 - FUEL AND SYNTHETIC OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 80 - CHARACTERISTICS |
| I.S. EN 50571:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES |
| CEI EN 60684-3-211 : 2007 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 211: HEAT-SHRINKABLE SLEEVING, SEMI-RIGID POLYOLEFIN, SHRINK RATIO 2:1 |
| 08/30177037 DC : DRAFT JAN 2008 | IEC 62329-3-101 - HEAT SHRINKABLE MOULDED SHAPES - PART 3: SPECIFICATION REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 101: HEAT SHRINKABLE MOULDED SHAPES, POLYOLEFIN, SEMI-RIGID, LIMITED FIRE HAZARD, MATERIAL REQUIREMENTS AND SYSTEM PERFORMANCE |
| UNI EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| BS EN 16603-35-10:2014 | Space engineering. Compatibility testing for liquid propulsion components, subsystems and systems |
| 03/106442 DC : DRAFT APR 2003 | ISO 4925 - ROAD VEHICLES - SPECIFICATION FOR NON-PETROLEUM BASE FLUIDS FOR HYDRAULIC SYSTEMS |
| 07/30175122 DC : DRAFT DEC 2007 | BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| UNI EN 2843 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 80 IRHD |
| BS EN 344-1:1993 | Safety, protective and occupational footwear for professional use Requirements and test methods |
| BS EN 2835:2012 | Aerospace series. Chloroprene rubber (CR). Heat resistance. Hardness 40 IRHD |
| UNE-ISO 4141-2:2017 | Road vehicles. Multi-core connecting cables. Part 2: Test methods and requirements for high performance sheathed cables |
| 17/30346258 DC : 0 | BS ISO 8820-6 - ROAD VEHICLES - FUSE-LINKS - PART 6: SINGLE-BOLT FUSE-LINKS |
| 15/30320877 DC : 0 | BS EN 2796 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 60 IRHD |
| 14/30293928 DC : 0 | BS ISO 13775-1 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 1: NON-FUEL APPLICATIONS |
| CLC/TS 61111:2006 | Matting of insulating material for electrical purposes |
| 09/30193685 DC : 0 | BS ISO 4081 - RUBBER HOSES AND TUBING FOR COOLING SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
| BS ISO 6072:2011 | Rubber. Compatibility between hydraulic fluids and standard elastomeric materials |
| BS ISO 6916-1:1995 | Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. Specification Sheeting |
| 17/30363520 DC : 0 | BS EN 4708-105 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 105: SEMI-FLEXIBLE POLYVINYLIDENE FLUORIDE (PVDF) - TEMPERATURE RANGE -55 DEGREE C AND 150 DEGREE C - PRODUCT STANDARD |
| EN ISO 14903:2017 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017) |
| BS ISO 6722:2006 | Road vehicles. 60 V and 600 V single-core cables. Dimensions, test methods and requirements |
| 11/30252284 DC : 0 | BS EN 857 - HOSE AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| 16/30346436 DC : 0 | BS EN 4708-103 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 103: FLUOROELASTOMER SLEEVES - TEMPERATURE RANGE -55 TO 200 DEGREES C |
| ISO/TR 7620:2005 | Rubber materials — Chemical resistance |
| DIN EN 16436-1 E : 2016 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| BS EN 2841:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 60 IRHD |
| 17/30355087 DC : 0 | BS ISO 13226 - RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
| 08/30195217 DC : 0 | BS EN 60684-3-281 ED.1 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 281: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, SEMI CONDUCTIVE |
| 91/83289 DC : DRAFT DEC 1991 | PREN 3624 - AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
| BS EN 4532:2009 | Aerospace series. Cables, optical, single core 200 ?m/280 ?m fibre, 2,5 mm outer jacket. Technical specification |
| 04/30122412 DC : DRAFT SEP 2004 | ISO 17194 - STRUCTURAL ADHESIVES - STANDARD DATABASE OF PROPERTIES |
| 07/30161675 DC : 0 | BS ISO 24454 - PHYSICAL TESTING OF RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE MULTI-POINT DATA |
| BS EN ISO 3949:2014 | Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification |
| 02/121978 DC : DRAFT APR 2002 | ISO/DIS 23711 - ELASTOMERIC SEALS - REQUIREMENTS FOR MATERIALS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - THERMOPLASTIC ELASTOMERS |
| BS EN 60684-3-217:1998 | Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 3:1 |
| BS EN 50014:1998 | Electrical apparatus for potentially explosive atmospheres. General requirements |
| 04/30095733 DC : DRAFT APR 2004 | EN 13832-4 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 4: FOOTWEAR PROTECTIVE AGAINST MICRO-ORGANISMS |
| ANSI Z21-101 : 2012 : R2017 | GAS HOSE CONNECTORS FOR PORTABLE AND MOVEABLE GAS APPLIANCES |
| PREN 853 : DRAFT 2011 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| PREN 3733-001 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| PREN 2797 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 70 IRHD |
| PREN 6059-303 : 200P3 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
| UNI EN 2835 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 40 IRHD |
| UNE-EN 15649-1:2010 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| ISO 22902-7:2006 | Road vehicles Automotive multimedia interface Part 7: Physical specification |
| ISO 4091:2003 | Road vehicles Connectors for the electrical connection of towing and towed vehicles Definitions, tests and requirements |
| PREN 3624 : 200P1 | AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
| CGA 8.1 : 2015 | ELASTOMERIC COMPOSITE HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS |
| PREN 50570 : DRAFT 2011 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS |
| BS ISO 4639-3:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxidized fuels |
| 18/30363978 DC : 0 | BS EN 1762 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| NF ISO 6072 : 2012 | RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS |
| ISO 13226:2011 | Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| I.S. CLC/TS 61111:2006 | MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| BS ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification |
| I.S. EN 4691-1:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| CSA E60079.0 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS |
| BS EN 13832-2:2006 | Footwear protecting against chemicals Requirements for footwear resistant to chemicals under laboratory conditions |
| I.S. EN 2842:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 70 IRHD |
| I.S. EN 60684-3-271:2011 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 271: HEAT-SHRINKABLE ELASTOMER SLEEVINGS, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| I.S. EN ISO 6185-3:2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| XP M88 561 : 2005 XP | SECONDARY CONTAINMENTS OF THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, LIQUID FUELS FOR MOVABLE HEATING APPLIANCE AND DIESEL FUELS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE (PE) OR METALLIC SECONDARY CONTAINMENTS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 61854:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| NFL 10-201 : 1998 | AEROSPACE SERIES - LUBRICATING DRY FLUOROCARBONATED COATING WITH BINDING MATERIAL AND FILLERS, OF A MINIMUM THICKNESS OF 5 MM ON METALLIC SUBSTRATE - QUALITY OF COATED PARTS |
| PREN 26 : DRAFT 2012 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining Wire-reinforced hydraulic types for coal mining Specification |
| UNI EN 2848 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 80 IRHD |
| I.S. EN 50416:2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES |
| UNE-EN 16084:2011 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints |
| ISO 14469:2017 | Road vehicles Compressed natural gas (CNG) refuelling connector |
| EN 4691-1:2017 | Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification |
| I.S. EN 279:1992 | HOMOGENOUS RUBBER MATERIALS FOR DYNAMIC SEALS IN DOMESTIC APPLIANCES USING COMBUSTIBLE GASES UP TO 200 MBAR |
| CEI EN 60684-3-246 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 246: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED |
| ISO/IEC 18745-1:2014 | Information technology Test methods for machine readable travel documents (MRTD) and associated devices Part 1: Physical test methods for passport books (durability) |
| I.S. EN 16473:2014 | FIREFIGHTERS HELMETS - HELMETS FOR TECHNICAL RESCUE |
| CEI EN 60684-3-165 : 2005 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 165: EXTRUDED POLYOLEFIN, FLAME RETARDED, LIMITED FIRE HAZARD SLEEVING |
| I.S. EN ISO 25649-7:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES (ISO 25469-7:2017) |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| I.S. EN 16643:2016 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED LUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR IQUID AND GASEOUS CHEMICALS - SPECIFICATION |
| BS EN 2795:2018 | Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 50 IRHD |
| UNI ISO 3384-1 : 2013 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
| SAE MS 1003-2 : 2004 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013) |
| UNI EN 2841 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 60 IRHD |
| ISO 15170-2:2001 | Road vehicles — Four-pole electrical connectors with pins and twist lock — Part 2: Tests and requirements |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| BS EN ISO 6185-1:2001 | Inflatable boats Boats with a maximum motor power rating of 4,5 kW |
| IEC 60335-2-7 : 7.2 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES |
| SAE MS 1005 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION |
| CEI EN 62329-3-102 : 2012 | HEAT-SHRINKABLE MOULDED SHAPES - PART 3: SPECIFICATION REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 102: HEAT-SHRINKABLE ELASTOMERIC MOULDED SHAPES, SEMI-RIGID, MATERIAL REQUIREMENTS AND SYSTEM PERFORMANCE |
| PREN 50569 : DRAFT 2011 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS |
| ISO 8066-2:2001 | Rubber and plastics hoses and hose assemblies for automotive air conditioning Specification Part 2: Refrigerant 134a |
| ISO 1823-1:1997 | Rubber hoses and hose assemblies Part 1: On-shore oil suction and discharge Specification |
| ONORM EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 4: Performance test procedures |
| EN ISO/IEC 80079-38:2016 | Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) |
| UNI EN ISO 3949 : 2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| EN ISO 6185-2:2001 | Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) |
| IEC 60984:2014 | Live working - Electrical insulating sleeves |
| ISO 13775-1:2015 | Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applications |
| IEC 60335-2-58 REDLINE : 4ED 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES |
| ISO 6447:1983 | Rubber seals Joint rings used for gas supply pipes and fittings Specification for material |
| ISO 16010:2005 | Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
| ISO 8469:2013 | Small craft Non-fire-resistant fuel hoses |
| ISO 12925-1:2018 | Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems |
| I.S. EN 60684-3-211:2007 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 211: HEAT-SHRINKABLE SLEEVING, SEMI-RIGID POLYOLEFIN, SHRINK RATIO 2:1 |
| IEC 60903:2014 | Live working - Electrical insulating gloves |
| I.S. EN ISO 6185-1:2002 | INFLATABLE BOATS - PART 1: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 4,5 KW |
| ISO 9631:2018 | Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material |
| IEC 60335-2-58:2017 | Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines |
| I.S. EN ISO 15584:2017 | SMALL CRAFT - INBOARD PETROL ENGINES - ENGINE-MOUNTED FUEL AND ELECTRICAL COMPONENTS (ISO 15584:2001) |
| ISO 17194:2007 | Structural adhesives A standard database of properties |
| DIN EN 2432:1995-11 | AEROSPACE SERIES - ETHYLEN-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 90 IRHD |
| DIN EN 2428:1995-11 | AEROSPACE SERIES - ETHYLEN-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 50 IRHD |
| DIN EN 2430:1995-11 | AEROSPACE SERIES - ETHYLEN-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 70 IRHD |
| DIN EN ISO 6808:2014-10 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
| DIN EN ISO 6807:2004-08 | Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003) |
| DIN EN 681-1:2016-07 (Draft) | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016 |
| DIN EN ISO 14113:2014-02 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| DIN EN 682:2006-10 | Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
| DIN EN ISO 11403-3:2014-09 | Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014) |
| DIN EN ISO 20344 E : 2013 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011) |
| DIN EN 12115:2011-04 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
| DIN EN 14382:2016-05 (Draft) | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| IEC 60684-3-216:2001+AMD1:2005+AMD2:2013 CSV | Flexible insulating sleeving - Part 3: Specifications for individualtypes of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving |
| BS EN 4054:2004 | Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubber and armature in aluminium alloy. Technical specification |
| BS EN 853:2015 | Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification |
| BS EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
| UNE-EN ISO 6808:2015 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
| ISO 1401:2016 | Rubber hoses for agricultural spraying |
| 12/30260914 DC : 0 | BS EN 4718 - AEROSPACE SERIES - POLYETHERKETONE WITH 55% CONTINUOUS GLASS FIBRE BY VOLUME (PEEK-GF55) |
| UNE-EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners — Specification |
| IEC 62329-3-102:2010 | Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance |
| ISO 9539:2010 | Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes |
| IEC 60684-3-228:2004 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| UNE-EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| ONORM EN 14382 : AUG 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| DIN EN 856:2016-09 | RUBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| IEC 60335-2-58:2017 RLV | Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines |
| OVE/ONORM EN 50465 : 2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| EN 2846 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 60 IRHD |
| EN 4708-101:2017 | Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 101: Polyolefin sleeving - Operating temperatures -55 °C to 135 °C - Product standard |
| UNI EN 13799 : 2012 | LPG EQUIPMENT AND ACCESSORIES - CONTENTS GAUGES FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSELS |
| EN 50465:2015 | Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW |
| UNI EN ISO 14113 : 2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) |
| UNI EN 13463-1 : 2009 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| UNI EN ISO 20344 : 2012 | PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR |
| EN ISO 6808:2014 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
| EN 60811-2-1 : 98 AMD 1 2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 2-1: METHODS SPECIFIC TO ELASTOMERIC COMPOUNDS - OZONE RESISTANCE, HOT SET AND MINERAL OIL IMMERSION TESTS |
| EN 483:1999/A4:2007 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| UNI EN 15069 : 2009 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| UNI EN 14241-1 : 2013 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| UNI EN 14125 : 2013 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| UNI EN 14382 : 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| UNI EN ISO 175 : 2010 | PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS |
| UNI EN 1360 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
| UNI EN ISO 6808 : 2014 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION |
| UNI EN 443 : 2008 | HELMETS FOR FIRE FIGHTING IN BUILDINGS AND OTHER STRUCTURES |
| UNI EN 13483 : 2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| UNI EN ISO 22435 : 2013 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING |
| CEI EN 60684-3-205 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 205: HEAT-SHRINKABLE CHLORINATED POLYOLEFIN SLEEVING, FLAME RETARDED, NOMINAL SHRINK RATIO 1,7:1 AND 2:1 |
| SAE J 517 : 2017 | HYDRAULIC HOSE |
| DIN EN ISO 21487 E : 2016 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012 + AMD 1:2014 + AMD 2:2015) |
| I.S. EN 3826:2014 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 70 IRHD |
| DIN EN ISO/IEC 80079-38 E : 2017 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
| UNI ISO 3384 : 2009 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
| I.S. EN 2795:2018 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 50 IRHD |
| DIN EN ISO-IEC 10373 : 1995 | IDENTIFICATION CARDS; TEST METHODS |
| 15/30333177 DC : 0 | BS EN 3475-411 - AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 411: RESISTANCE TO FLUIDS |
| BS EN 3733-001:2009 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Technical specification |
| 05/30128222 DC : DRAFT JAN 2005 | ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
| BS ISO 16301:2017 | Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks. Specification |
| BS EN 60684-3-218:1998 | Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:1 |
| I.S. EN 60335-2-75:2004 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| I.S. EN 13463-1:2009 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| 11/30242411 DC : 0 | BS EN 3697 - AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 60 IRHD |
| BS EN ISO 12736:2014 | Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| 16/30340982 DC : 0 | BS EN 2796 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 60 IRHD |
| 11/30242391 DC : 0 | BS EN 2839 - HEAT RESISTANT POLYCHLOROPRENE RUBBER (CR) - HARDNESS GRADE 80 - CHARACTERISTICS |
| BS EN 16820:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining |
| 15/30320878 DC : 0 | BS EN 2797 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 70 IRHD |
| BS EN 61111 : 2010 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| 06/30117784 DC : DRAFT JAN 2006 | ISO 12046 - SYNCHRONOUS BELT DRIVES - AUTOMOTIVE BELTS - DETERMINATION OF PHYSICAL PROPERTIES |
| BS EN 3698:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 70 IRHD |
| 15/30327073 DC : 0 | BS ISO 15500-2 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| 11/30249219 DC : 0 | BS EN 50569 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS |
| ISO 19378:2003 | Lubricants, industrial oils and related products (class L) Machine-tool lubricants Categories and specifications |
| NF EN ISO 6185-1 : 2002 | INFLATABLE BOATS - PART 1: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 4,5 KW |
| API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
| I.S. EN 1361:2004 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| DIN EN 50014 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| 15/30320879 DC : 0 | BS EN 2798 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 80 IRHD |
| 10/30195690 DC : 0 | BS EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| UNI EN ISO 8469 : 2013 | SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES |
| BS ISO 4930:2006 | Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150°C max.) |
| BS ISO 17325-2:2014 | Ships and marine technology. Marine environment protection. Oil booms Strength and performance requirements |
| BS ISO 27126:2014 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification |
| BS ISO 4925:2005 | Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems |
| 04/30095069 DC : 0 | BS EN 443 - FIREFIGHTERS HELMETS |
| ISO 6916-1:1995 | Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting |
| 11/30242395 DC : 0 | BS EN 2843 - MINERAL OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 80 - CHARACTERISTICS |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| 17/30347930 DC : 0 | BS ISO 20766-3 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 3: 80% STOP VALVE |
| 08/30176974 DC : DRAFT JAN 2008 | BS IEC 62329-3-101 - HEAT SHRINKABLE MOULDED SHAPES - PART 3: SPECIFICATION REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 101 - HEAT-SHRINKABLE MOULDED SHAPES, POLYOLEFIN, SEMI-RIGID, LIMITED FIRE HAZARD, MATERIAL REQUIREMENTS AND SYSTEM PERFORMANCE |
| PD ISO/TR 7620:2005 | Rubber materials. Chemical resistance |
| DD IEC/PAS 62282-6-150:2011 | Fuel cell technologies Micro fuel cell power systems. Safety. Water reactive (UN Division 4.3) compounds in indirect PEM fuel cells |
| 06/30152283 DC : 0 | BS IEC 60684-3-205 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 205: HEAT-SHRINKABLE POLYCHLOROPRENE SLEEVING, FLAME RETARDED, SHRINK RATIO 1,7:1 |
| BS ISO 14469-3:2006 | Road vehicles. Compressed natural gas (CNG) refuelling connector 25 MPa (250 bar) connector |
| 13/30236754 DC : 0 | BS ISO 16380 - ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR |
| PREN 14125 : DRAFT 2011 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| ISO 3821:2008 | Gas welding equipment Rubber hoses for welding, cutting and allied processes |
| DIN EN ISO 21487:2016-05 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012 + AMD 1:2014 + AMD 2:2015) |
| BS EN ISO 10088:2017 | Small craft. Permanently installed fuel systems |
| CEI EN 60684-3-233 : 2006 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 233: HEAT-SHRINKABLE FLUOROELASTOMER SLEEVING, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| 12/30238564 DC : 0 | BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR HYDRAULIC JACKS AND FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOLS - SPECIFICATION |
| 06/30126966 DC : DRAFT MAR 2006 | ISO 8820-6 - ROAD VEHICLES - FUSE-LINKS - PART 6: SINGLE-BOLT FUSE-LINKS |
| BS ISO 3862:2009 | Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification |
| BS EN 60684-3-272:1998 | Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1, thin wall |
| 08/30166803 DC : DRAFT FEB 2008 | BS EN ISO 9539 - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| NF ISO 3384-1 : 2012 AMD 1 2013 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
| DIN EN 3826:2015-12 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 70 IRHD |
| 07/30150928 DC : 0 | BS ISO 5771 - RUBBER HOSE AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
| BS MA 102:1986 | Specification for fire resistant fuel hoses for small craft |
| BS G 246:1991 | Specification for cable ties for installation under controlled tension on aircraft electric cable harnesses |
| BS ISO 15372:2000 | Ships and marine technology. Inflatable rescue boats. Coated fabrics for inflatable chambers |
| 11/30250273 DC : 0 | BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| BS 7329:1990 | Specification for materials for equipment used in gas welding, cutting and allied processes |
| 16/30311803 DC : 0 | BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR MANUALLY OPERATED HYDRAULIC JACKS - SPECIFICATION |
| 13/30227963 DC : 0 | BS ISO 1823 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE - SPECIFICATION |
| BS 5G 178-1:1993 | Crimped joints for aircraft electrical cables and wires. Specification for design requirements (including tests) for components and tools |
| 13/30290460 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| UNI EN 2840 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 50 IRHD |
| I.S. EN ISO 8469:2013 | SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES (ISO 8469:2013) |
| I.S. EN 15502-2-1:2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| BS 5G 205-1:1990 | Secondary batteries for aircraft Specification for lead-acid batteries |
| 12/30264535 DC : 0 | BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| UNE-EN ISO 18752:2017 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
| BS AU 174-2:1985 | Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles Specification for non-petroleum base brake fluid |
| 16/30302789 DC : DRAFT APR 2016 | BS ISO 19718 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE- REINFORCED, FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOL APPLICATIONS - SPECIFICATION |
| ISO 6722-1:2011 | Road vehicles — 60 V and 600 V single-core cables — Part 1: Dimensions, test methods and requirements for copper conductor cables |
| DIN EN 15649-1:2014-06 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| PREN 13832-3 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR PROLONGED CONTACT WITH CHEMICALS |
| BS ISO 4079-2:2005 | Rubber hoses and hose assemblies. Textile-reinforced hydraulic types. Specification Water-based fluid applications |
| 12/30254956 DC : 0 | BS EN 26 - GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| 09/30185951 DC : 0 | BS EN 15889 - FIREFIGHTING HOSES - TEST METHODS |
| 08/30190043 DC : DRAFT SEP 2008 | BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
| UNI EN 2845 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 50 IRHD |
| 05/30127024 DC : DRAFT SEP 2005 | ISO 4930 - ROAD VEHICLES - ELASTOMERIC SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 150 DEGREE C MAX.) |
| BS EN 15649-7:2009 | Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class E devices |
| SAE J 2576 : 2002 | BLADE FUSES - 42 V SYSTEM |
| 96/201187 DC : DRAFT FEB 1996 | IEC 60684-3-216 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 216: HEAT-SHRINKABLE, FLAME RETARDED, LIMITED FIRE HAZARD SLEEVING |
| 05/30127034 DC : DRAFT SEP 2005 | ISO 6119 - ROAD VEHICLES - ELASTOMERIC SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGREE C MAX.) |
| 08/30183539 DC : DRAFT JUNE 2008 | BS ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION |
| 02/205017 DC : DRAFT MAY 2002 | EN 60335-2-7 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES |
| BS EN 2849:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Fuel and synthetic oil resistant. Hardness 90 IRHD |
| 15/30320883 DC : 0 | BS EN 2799 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 90 IRHD |
| 16/30335326 DC : 0 | BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| BS ISO 1823:2015 | Rubber hose and hose assemblies for oil suction and discharge service. Specification |
| 04/30095727 DC : DRAFT APR 2004 | EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 2: PROTECTION AGAINST CHEMICALS SPRAYING |
| ANSI Z21.21 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| BS ISO 15500-2:2012 | Road vehicles. Compressed natural gas (CNG) fuel system components Performance and general test methods |
| 13/30284248 DC : 0 | BS EN 16643 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED FLUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR LIQUID AND GASEOUS CHEMICALS - SPECIFICATION |
| CEI EN 60684-3-229 : 2003 | FLEXIBLE INSULATING SLEEVING - PART 3 : SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 229: HEAT SHRINKABLE SEMI-FLEXIBLE, POLYVINYLIDENE FLUORIDE SLEEVING, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| 01/704739 DC : DRAFT FEB 2001 | PREN 14125 - UNDERGROUND PIPEWORK FOR PETROL FILLING STATIONS |
| BS ISO 19013-2:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels |
| BS EN 60684-3-213:1999 | Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1 - Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1 |
| DD ENV 343:1998 | Protective clothing. Protection against foul weather |
| NF EN ISO 9539 : 2010 AMD 1 2014 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
| 07/30172345 DC : 0 | BS EN 15724 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - SECONDARY CONTAINMENTS USED WITH TANKS COMPLYING WITH EN 13341 - REQUIREMENTS AND TEST METHODS |
| DIN EN 15268:2008-11 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP |
| 11/30242385 DC : 0 | BS EN 2835 - HEAT RESISTANT POLYCHLOROPRENE RUBBER (CR) - HARDNESS GRADE 40 - CHARACTERISTICS |
| 03/300201 DC : DRAFT FEB 2003 | IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| BS EN 61300-2-34:2009 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Tests. Resistance to solvents and contaminating fluids of interconnecting components and closures |
| 04/301209 DC : DRAFT JAN 2004 | EN ISO 21487 - SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS |
| 03/112184 DC : DRAFT AUG 2003 | EN 50416 - SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES |
| 16/30317675 DC : 0 | BS EN ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| DD ENV 1375-1:1994 | Identification card systems. Intersector integrated circuit(s) card additional formats ID-000 card size and physical characteristics |
| BS EN 62329-3-101:2010 | Heat-shrinkable moulded shapes Specification requirements for shape dimensions, material requirements and compatibility performance. Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance |
| 15/30320875 DC : 0 | BS EN 2567 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 80 IRHD |
| 09/30204183 DC : 0 | BS EN 88-1 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 500 MBAR |
| ISO 4079-2:2005 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| 08/30176914 DC : DRAFT JAN 2008 | BS EN 60684-3-271 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 271: HEAT-SHRINKABLE ELASTOMER SLEEVINGS, FLAME RETARTED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| I.S. EN 3102:2013 | AEROSPACE SERIES - SEALANTS - TEST METHODS - DETERMINATION OF LOW-TEMPERATURE FLEXIBILITY |
| DEFSTAN 60-1(PT6)/1(1996) : 1996 | CABLES, FIBRE OPTIC - PART 6: CABLES, FIBRE OPTIC, INTERNAL (LAND SYSTEMS) |
| PREN 2799 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) LOW COMPRESSIONS SET - HARDNESS 90 IRHD |
| 03/321545 DC : DRAFT DEC 2003 | IEC 60684-3-248 ED.1 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 248: GENERAL PURPOSE, HEAT-SHRINKABLE, DUAL WALL POLYOLEFIN SLEEVING, FLAME RETARDED, SHRINK RATIOS: 2:1, 3:1, 4:1 |
| NF EN 60684 3 340 TO 342 : 2003 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 340 TO 342: EXPANDABLE BRAIDED POLYETHYLENE TEREPHTHALATE TEXTILE SLEEVING |
| NF EN 16084 : 2011 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| ISO 16301:2017 | Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks — Specification |
| NF EN 60684 3 211 : 2009 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 211: HEAT-SHRINKABLE SLEEVING, SEMI-RIGID POLYOLEFIN, SHRINK RATIO 2:1 |
| 07/30161910 DC : 0 | BS EN 15649-7 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
| BS ISO 13775-1:2015 | Thermoplastic tubing and hoses for automotive use Non-fuel applications |
| 07/30161925 DC : 0 | BS EN 62329-3-100 - HEAT SHRINKABLE SHAPES - PART 3: SPECIFICATIONS REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 100-107: HEAT-SHRINKABLE MOULDED SHAPE MATERIAL TYPES - TYPE A THROUGH TYPE H |
| BS ISO 19003:2006 | Rubber and rubber products. Guidance on the application of statistics to physical testing |
| 01/106321 DC : DRAFT AUG 2001 | PREN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| UNE-EN ISO 9539:2011 | Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010) |
| PREN 6111 : 200P1 | AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) - HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD |
| PREN 4708-105 : 200P1 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 105: SEMI-FLEXIBLE POLYVINYLIDENE FLUORIDE (PVDF) - OPERATING TEMPERATURE -55 DEGREES C TO 150 DEGREES C - PRODUCT STANDARD |
| 01/704470 DC : 0 | PREN 4532 - AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE, 200/280 MICRO M FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION |
| 03/300797 DC : DRAFT JAN 2003 | EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION |
| ISO 6185-3:2014 | Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| UNI EN 2836 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 50 IRHD |
| SAE MS 1000 : 2013 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
| IEC 62893-2:2017 | Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 2: Test methods |
| I.S. EN 2840:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 50 IRHD |
| UNI EN 16084 : 2011 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| ANSI LC 4 : 2012 : INC : ADD A : 2013 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| PREN 3207 : 1996 | AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
| 16/30341348 DC : 0 | BS EN 2799 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 90 IRHD |
| SAE MS 1006 : 2018 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE F LUBRICANT FOR SPINDLE BEARINGS, AND ASSOCIATED CLUTCHES - SPECIFICATION |
| ISO 13775-2:2016 | Thermoplastic tubing and hoses for automotive use Part 2: Petroleum-based-fuel applications |
| DIN EN 549:1995-04 | RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
| PREN 3827 : DRAFT 2006 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 80 IRHD |
| DIN EN 15502-2-1:2013-01 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| UNE-EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| NF EN 60684 3-217 : 1998 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 217: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, FLAME RETARDED, SHRINK RATIO 3:1 |
| PREN 4641-100 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 100: TIGHT STRUCTURE 62,5/125 [MU]M CORE GI FIBRE 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| EN 60068-2-74:1999 | Environmental testing - Part 2: Tests - Test Xc: Fluid contamination |
| PREN 2844 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 90 IRHD |
| BS EN ISO 3821:2010 | Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
| UNI EN 2837 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 60 IRHD |
| UNI EN 15649-1 : 2014 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| EN 4708-104:2017 | Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 104: Semi-rigid polyvinylidene fluoride (PDVF) - Operating temperature - 55 °C to 175 °C - Product Standard |
| SAE MS 1003 : 2018 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION |
| 17/30328799 DC : 0 | BS EN 549 - RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
| I.S. EN 4708-101:2017 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 101: POLYOLEFIN SLEEVING - OPERATING TEMPERATURES -55 DEGREES C TO 135 DEGREES C - PRODUCT STANDARD |
| I.S. EN ISO 7840:2013 | SMALL CRAFT - FIRE RESISTANT FUEL HOSES (ISO 7840:2013) |
| EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| 16/30318653 DC : 0 | BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| I.S. EN ISO 18752:2016 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 18752:2014) |
| ISO 11237-2:2006 | Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Water-based fluid applications |
| I.S. EN 61111:2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
| I.S. EN 13832-3:2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| BS ISO 23297:2017 | Thermoplastic hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification |
| I.S. EN ISO/IEC 80079-38:2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012) |
| ISO 15500-2:2016 | Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and general test methods |
| DEFSTAN 91-43/2(1993) : 1993 | LUBRICATING OIL, ENGINE: GRADE 50 NATO CODE NO. 0-182 JOINT SERVICE DESIGNATION: OMD-330 |
| DIN EN ISO 6185-4:2011-10 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| BS ISO/IEC 18745-1:2014 | Information technology. Test methods for machine readable travel documents (MRTD) and associated devices Physical test methods for passport books (durability) |
| ISO 6111:1982 | Rubber footwear Lined or unlined rubber industrial boots with chemical resistance |
| BS EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification |
| BS ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification |
| CEI EN 60811-404 : 2014 | ELECTRIC AND OPTICAL FIBRE CABLES - TEST METHODS FOR NON-METALLIC MATERIALS - PART 404: MISCELLANEOUS TESTS - MINERAL OIL IMMERSION TESTS FOR SHEATHS |
| I.S. EN 4532:2009 | AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 [MU]M/280 [MU]M FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION |
| UNI EN ISO 7840 : 2013 | SMALL CRAFT - FIRE-RESISTANT FUEL HOSES |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS EN ISO 6185-2:2001 | Inflatable boats Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive |
| EN ISO 25649-7:2017 | Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017) |
| BS EN 6059-303:2017 | Aerospace series. Electrical cables, installation. Protection sleeves. Test methods Resistance to fluids |
| BS EN ISO 6185-3:2014 | Inflatable boats Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| ISO 3384-2:2012 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 2: Testing with temperature cycling |
| IEC 60335-2-5:2012+AMD1:2018 CSV | Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers |
| UNE-EN ISO 7840:2014 | Small craft - Fire-resistant fuel hoses (ISO 7840:2013) |
| ONORM EN ISO 3949 : 2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| EN ISO 13590:2003/AC:2004 | SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
| ISO 3862-2:2005 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| ISO 19013-2:2016 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels |
| I.S. EN 61479:2001 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| ISO 27126:2014 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals Specification |
| DIN EN 13765:2015-05 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| UNI EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER |
| ISO 3601-5:2015 | Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| PREN 1762 : DRAFT 2018 | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| EN 2795:2018 | Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD |
| ISO 21487:2012 | Small craft — Permanently installed petrol and diesel fuel tanks |
| ISO 14469-2:2007 | Road vehicles Compressed natural gas (CNG) refuelling connector Part 2: 20 MPa (200 bar) connector, size 2 |
| ISO 1436:2017 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
| I.S. EN 61112:2009 | LIVE WORKING - ELECTRICAL INSULATING BLANKETS |
| EN ISO 3949:2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| ISO 23711:2003 | Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers |
| I.S. EN 1762:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| I.S. EN 14225-2:2017 | DIVING SUITS - PART 2: DRY SUITS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 60903:2003 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| ISO 23297:2017 | Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification |
| I.S. EN ISO 10373:1995 | IDENTIFICATION CARDS - TEST METHODS |
| I.S. EN ISO 1825:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION (ISO 1825:2017) |
| I.S. EN 60684-3-229:2003 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 229: HEAT-SHRINKABLE SEMI-FLEXIBLE, POLYVINYLIDENE FLUORIDE SLEEVING, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| ISO 17324:2014 | Rubber hoses for automotive turbochargers — Specification |
| I.S. EN 60335-2-58:2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES |
| I.S. EN 60684-3-228:2004 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 228: HEAT-SHRINKABLE, SEMI-RIGID POLYVINYLIDENE FLUORIDE SLEEVING, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| I.S. EN 60684-3-213:1999 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 213: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, NOT FLAME RETARDED, SHRINK RATIO 2:1 |
| UNI EN ISO 11403-3 : 2014 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES |
| I.S. EN 60684-3-340 TO 342:2003 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 340 TO 342: EXPANDABLE BRAIDED POLYETHYLENE TEREPHTHALATE TEXTILE SLEEVING |
| BS EN 13765 : 2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| EN 60684-3-212:2006/corrigendum:2006 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings |
| IEC 61854:1998 | Overhead lines - Requirements and tests for spacers |
| DIN EN ISO 6806:2015-08 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR USE IN OIL BURNERS - SPECIFICATION (ISO 6806:2017) |
| DIN EN 13831:2007-12 | Closed expansion vessels with built in diaphragm for installation in water |
| DIN EN 15069 E : 2010 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| DIN EN ISO 175 E : 2011 | PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS |
| DIN EN 13799:2012-06 | LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
| BS EN ISO 2398:2016 | Rubber hoses, textile-reinforced, for compressed air. Specification |
| ISO 13340:2001 | Transportable gas cylinders Cylinders valves for non-refillable cylinders Specification and prototype testing |
| IEC 60684-3-205:2011 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1 |
| IEC 60684-3-271:2011 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1 |
| BS EN 3050:1998 | O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification |
| IEC 61479:2001+AMD1:2002 CSV | Live working - Flexible conductor covers (line hoses) of insulating material |
| 11/30242263 DC : 0 | BS EN 4691-001 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - TECHNICAL SPECIFICATION |
| BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
| IEC 61300-2-34:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures |
| IEC 61112:2009 | Live working - Electrical insulating blankets |
| BS EN 1375:2002 | Identification card system. Intersector integrated circuit(s) card additional formats. ID-000 card size and physical characteristics |
| UNE-EN ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
| IEC 60684-3-165:2004 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving |
| BS EN 1361:2004 | Rubber hoses and hose assemblies for aviation fuel handling. Specification |
| BS EN 344 : 93 AMD 2 REPRINT | REQUIREMENTS AND TEST METHODS FOR SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE |
| DIN EN ISO 20344:2013-02 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
| ISO 2398:2016 | Rubber hoses, textile-reinforced, for compressed air Specification |
| ISO 11403-3:2014 | Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties |
| ISO 3862-1:2001 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| UNE-EN ISO 1401:2017 | Rubber hoses for agricultural spraying (ISO 1401:2016) |
| UNE-EN ISO 3821:2011 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
| BS EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
| BS EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
| BS EN ISO 13340:2001 | Transportable gas cylinders. Cylinder valves for non-refillable cylinders. Specification and prototype testing |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| BS EN ISO 22435 : 2007 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING |
| BS EN 681-3:2000 | Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber |
| BS EN 29539:1992 | Specification for materials for equipment used in gas welding, cutting and allied processes |
| UNE-EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| BS EN 13799:2012 | LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
| IEC 60684-3-272:1998 | Flexible insulating sleeving - Part 3: Specifications for indiviual types of sleeving - Sheet 272: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1, thin wall |
| IEC 60684-3-212:2005 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings |
| BS EN ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners. Specification |
| UNE-EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| BS EN ISO 11114-2:2013 | Gas cylinders. Compatibility of cylinder and valve materials with gas contents Non-metallic materials |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| IEC 60684-3-229:2003 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| ISO 3384:2005 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression at ambient and at elevated temperatures |
| IEC 62282-6-100:2010+AMD1:2012 CSV | Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety |
| UNE-EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| ISO 6808:2014 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification |
| BS EN 483 : 2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| DIN EN 15069:2010-07 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| IEC 60684-3-248:2007 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| IEC 62329-3-101:2010 | Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance |
| IEC 60684-3-246:2007 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, non-flame retarded |
| BS EN 12078:1998 | Zero governors for gas burners and gas burning appliances |
| IEC 60684-3-213:1998 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 213: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1 |
| BS EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
| BS EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| 05/30134569 DC : DRAFT JUN 2005 | IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| UNE-EN 50571:2014 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines |
| IEC 60811-2-1:1998+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests |
| BS EN 12067-1:1999 | Gas/air ratio controls for gas burners and gas burning appliances Pneumatic types |
| BS EN 13831:2007 | Closed expansion vessels with built-in diaphragm for installation in water |
| BS EN 682:2002 | Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids |
| ISO 12736:2014 | Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| UNE-EN ISO 11403-3:2014 | Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014) |
| UNE-EN ISO 5774:2016 | Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
| UNE-EN 89:2016 | Gas-fired storage water heaters for the production of domestic hot water |
| BS EN ISO 1401:2016 | Rubber hoses for agricultural spraying |
| UNE-EN 26:2016 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| BS EN ISO 8092-2:2005 | Road vehicles. Connections for on-board electrical wiring harnesses Definitions, test methods and general performance requirements |
| ISO 6807:2003 | Rubber hoses and hose assemblies for rotary drilling and vibration applications Specification |
| 12/30260913 DC : 0 | BS EN 4717 - AEROSPACE SERIES - POLYETHERKETONE WITH 55% CONTINUOUS CARBON FIBRE BY VOLUME (PEEK-CF55) |
| BS EN 13787:2001 | Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar |
| BS EN 3207:1998 | Rubber compounds. Technical specification |
| UNE-EN 13463-1:2011 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| UNE-EN 50570:2014 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers |
| IEC 60811-404:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
| UNE-EN ISO 11114-2:2013 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) |
| BS EN 1123-1:1999 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Requirements, testing, quality control |
| UNE-EN ISO 2398:2017 | Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) |
| ISO 22435:2007 | Gas cylinders — Cylinder valves with integrated pressure regulators — Specification and type testing |
| BS EN 4691-1:2017 | Aerospace series. Tie rod with integrated bolts Technical specification |
| EN 61300-2-34:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures |
| EN 855 : 1996 | PLASTICS HOSES AND HOSE ASSEMBLIES - THERMOPLASTICS TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
| EN 377:1993/A1:1996 | LUBRICANTS FOR APPLICATIONS IN APPLIANCES AND ASSOCIATED CONTROLS USING COMBUSTIBLE GASES EXCEPT THOSE DESIGNED FOR USE IN INDUSTRIAL PROCESSES |
| EN 13799:2012 | LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels |
| EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| EN 681-1:1996/A3:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
| EN 3698:2013 | Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 70 IRHD |
| EN 2261 : 1995 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 70 IRHD |
| EN 297:1994/A2:1996/AC:2006 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE B[11] AND B[11BS] BOILERS FITTED WITH ATMOSPHERIC BURNERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| EN 2260 : 1995 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 60 IRHD |
| EN 853:2015 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| EN ISO 10088:2017 | Small craft - Permanently installed fuel systems (ISO 10088:2013) |
| EN 858-1:2002/A1:2004 | SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| EN ISO 18752:2016 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
| EN ISO 3821:2010 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
| EN 16678:2015 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| EN ISO 22435:2007/A1:2012 | GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING (ISO 22435:2007/AMD 1:2012) |
| EN ISO 9539:2010/A1:2013 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010/AMD 1:2013) |
| EN 2429 : 1995 | AEROSPACE SERIES - ETHYLENE-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 60 IRHD |
| EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
| EN 14241-1:2013 | Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
| EN 2845 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 50 IRHD |
| EN 88:1991/A1:1996 | PRESSURE GOVERNORS FOR GAS APPLIANCES FOR INLET PRESSURE UP TO 200 MBAR |
| EN ISO 6807 : 2003 | RUBBER HOSES AND HOSE ASSEMBLIES FOR ROTARY DRILLING AND VIBRATION APPLICATIONS - SPECIFICATION |
| EN 2428 : 1995 | AEROSPACE SERIES - ETHYLENE-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 50 IRHD |
| EN ISO 2398:2016 | Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) |
| EN 16603-35-10:2014 | Space engineering - Compatibility testing for liquid propulsion components, subsystems and systems |
| EN 15268:2008 | Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
| EN 2259 : 1995 | AEROSPACE SERIES - SILICONE RUBBER (VMQ) - HARDNESS 50 IRHD |
| EN 849:1996/A2:2001 | TRANSPORTABLE GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| EN 1761:1999 | Rubber hoses and hose assemblies for fuel truck delivery - Specification |
| EN 2432 : 1995 | AEROSPACE SERIES - ETHYLENE-PROPYLENE RUBBER (EPM/EPDM) - HARDNESS 90 IRHD |
| EN 3825:2014 | Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 60 IRHD |
| EN 1375:2002 | Identification card system - Intersector integrated circuit(s) card additional formats - ID-000 card size and physical characteristics |
| EN 16820:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining |
| EN 16643:2016 | Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification |
| EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011) |
| EN 29539 : 1992 | SPECIFICATION FOR MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES |
| EN 681-3:2000/A2:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 3: CELLULAR MATERIALS OF VULCANIZED RUBBER |
| ONORM EN 877 : 2008 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 2262 : 1995 | Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD |
| EN 559 : 2003 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| EN 3733-001 : 2009 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| EN 2841 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 60 IRHD |
| EN 28028 : 1993 | RUBBER AND/OR PLASTICS HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION |
| EN 14382:2005+A1:2009/AC:2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| EN 16473:2014 | Firefighters helmets - Helmets for technical rescue |
| EN 344:1992/A1:1997 | REQUIREMENTS AND TEST METHODS FOR SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE |
| ENV 343 : 1998 | PROTECTIVE CLOTHING - PROTECTION AGAINST FOUL WEATHER |
| EN 2839 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 80 IRHD |
| EN 1361 : 2004 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| EN 15649-1:2009+A2:2013 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| EN 2844 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 90 IRHD |
| EN 2431 : 1995 | Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD |
| EN 3826:2014 | Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 70 IRHD |
| EN 6059-303:2017 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids |
| EN 15649-7:2009 | Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices |
| EN ISO 13340:2001 | Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001) |
| EN 4532 : 2009 | Aerospace series - Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket - Technical specification |
| EN 3102:2013 | Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility |
| EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| EN ISO 8092-2:2005 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005) |
| EN 2104 : 1996 | Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD |
| EN 15502-2-1:2012+A1:2016 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
| EN 1765:2016 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| EN 2838 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 70 IRHD |
| EN 682:2002/A1:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
| EN 16084:2011 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints |
| EN ISO 15584:2017 | Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001) |
| EN 26:2015 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| EN 4641-102:2009 | Aerospace series - Cables, optical 125 μm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard |
| EN 4708-301:2018 | Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 301: Adhesive lined polyolefin sleevings - Operating temperature - 55 °C to 105 °C - Product Standard |
| EN 4641-100:2015 | Aerospace series - Cables, optical 125 μm diameter cladding - Part 100: Tight structure 62,5/125 µm core GI fibre 1,8 mm outside diameter - Product standard |
| EN 857:2015 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| EN ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
| EN ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) |
| EN 13913:2003 | Railway applications - Rubber suspension components - Elastomer-based mechanical parts |
| EN 2843 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 80 IRHD |
| EN 2837 : 2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 60 IRHD |
| EN 13787:2001 | Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar |
| EN 2430 : 1995 | AEROSPACE SERIES - ETHYLENE-PROPYLENE RUBBER (EPM/EPDM) -HARDNESS 70 IRHD |
| EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
| EN 2847 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 70 IRHD |
| EN 13597:2003 | Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| EN 2836 : 2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 50 IRHD |
| EN 3827:2014 | Aerospace series - Fluorosilicone rubber (FVMQ) - Hardness 80 IRHD |
| EN 2849 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 90 IRHD |
| EN 2848 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 80 IRHD |
| EN ISO 1401:2016 | Rubber hoses for agricultural spraying (ISO 1401:2016) |
| EN 3207 : 1998 | AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
| EN 3697:2013 | Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Low temperature resistant - Hardness 60 IRHD |
| EN 2835 : 2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 40 IRHD |
| EN ISO 12736:2014 | Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
| EN 856:2015 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| EN 443:2008 | Helmets for fire fighting in buildings and other structures |
| EN 279 : 1991 | HOMOGENOUS RUBBER MATERIALS FOR DYNAMIC SEALS IN DOMESTIC APPLIANCES USING COMBUSTIBLE GASES UP TO 200 MBAR |
| EN 3747:2007 | Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification |
| EN 13831:2007 | Closed expansion vessels with built in diaphragm for installation in water |
| EN 2840:2013 | Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 50 IRHD |
| EN 681-2:2000/A2:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS |
| EN ISO 175:2010 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| EN 4054:2004 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification |
| EN 3909:2016 | Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies |
| EN 2842 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 70 IRHD |
| EN 3050:1998 | Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification |
| EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
| EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| EN ISO 5774:2016 | Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
| EN 1825-1:2004/AC:2006 | GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
| EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| DIN EN 16436-1:2016-04 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| 15/30315105 DC : 0 | BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER |
| 03/300798 DC : DRAFT JAN 2003 | EN 13483 - HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEM - SPECIFICATION |
| BS EN 3102:2013 | Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility |
| ISO 15584:2001 | Small craft Inboard petrol engines Engine-mounted fuel and electrical components |
| 04/30111048 DC : 0 | EN 88-2 - PRESSURE GOVERNORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 2 - PRESSURE GOVERNORS FOR INLET PRESSURES BETWEEN 0.5 BAR AND 5 BAR |
| IEC 60335-2-108:2008 | Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers |
| 11/30252272 DC : 0 | BS EN 853 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| ISO 4141-1:2005 | Road vehicles Multi-core connecting cables Part 1: Test methods and requirements for basic performance sheathed cables |
| I.S. EN 559:2003 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| BS ISO 17324:2014 | Rubber hoses for automotive turbochargers. Specification |
| DIN ISO 4925:1980-04 | ROAD VEHICLES - NON-PETROLEUM BASE BRAKE FLUID |
| 12/30258831 DC | BS EN 60335-2-75. Household and similar electrical appliances. Safety. Part 2-75. Particular requirements for Commercial dispensing appliances and vending machines |
| DIN EN ISO 9539:2014-04 | GAS WELDING EQUIPMENT - MATERIALS FOR EQUIPMENT USED IN GAS WELDING, CUTTING AND ALLIED PROCESSES (ISO 9539:2010 + AMD.1:2013) |
| DIN ISO 3384-1 E : 2015 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE (ISO 3384-1:2011 + AMD.1:2013) |
| CSA/ANSI LC 6:08 (R2018) | Natural gas operated diaphragm pumps |
| ISO 19003:2006 | Rubber and rubber products — Guidance on the application of statistics to physical testing |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| I.S. EN 3698:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 70 IRHD |
| BS EN 60684-3-228:2004 | Flexible insulating sleeving Specification requirements for individual types of sleeving - Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| 16/30340980 DC : 0 | BS EN 2568 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 90 IRHD |
| BS EN 3697:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 60 IRHD |
| 12/30261644 DC : 0 | BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE |
| I.S. EN 2841:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 60 IRHD |
| BS EN 62282-6-100 : 2010 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY |
| BS EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers |
| 11/30242390 DC : 0 | BS EN 2838 - HEAT RESISTANT POLYCHLOROPRENE RUBBER (CR) - HARDNESS GRADE 70 - CHARACTERISTICS |
| 08/30183047 DC : DRAFT MAY 2008 | BS ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| BS ISO 3808:2002 | Road vehicles. Unscreened high-voltage ignition cables. General specifications, test methods and requirements |
| 12/30197523 DC : 0 | BS ISO 12619-2 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/METHANE BLENDS FUEL COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| BS EN ISO 15584:2017 | Small craft. Inboard petrol engines. Engine-mounted fuel and electrical components |
| UNI EN 2846 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 60 IRHD |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ISO 6185-2:2001 | Inflatable boats Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive |
| 11/30242394 DC : 0 | BS EN 2842 - MINERAL OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 70 - CHARACTERISTICS |
| I.S. EN 2835:2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 40 IRHD |
| BS ISO 14903:2012 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| 96/201186 DC : DRAFT FEB 1996 | IEC 60684-3-214 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, NOT FLAME RETARDED, SHRINK RATIO 3:1 |
| ONORM EN 12115 : OCT 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| ISO 7840:2013 | Small craft Fire-resistant fuel hoses |
| I.S. EN 13832-2:2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| BS ISO 17325-1:2014 | Ships and marine technology. Marine environment protection. Oil booms Design requirements |
| DIN EN ISO 3949 E : 2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| BS EN ISO 25649-7:2017 | Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class E devices |
| PREN 1360 : DRAFT 2011 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 13/30275849 DC : 0 | BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| ISO 6722:2006 | Road vehicles 60 V and 600 V single-core cables Dimensions, test methods and requirements |
| I.S. EN 3825:2014 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 60 IRHD |
| 15/30317642 DC : 0 | BS EN ISO 8028 - RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION |
| BS EN 62329-3-102:2010 | Heat-shrinkable moulded shapes Specification requirements for shape dimensions, material requirements and compatibility performance. Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance |
| BS EN 60684-3-271:2004 | Flexible insulating sleeving Specifications for individual types of sleeving - Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| BS EN 2844:2013 | Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 90 IRHD |
| 17/30327510 DC : 0 | BS ISO 20766-2 - ROAD VEHICLES - LIQUEFIED PETROLEUM GAS (LPG) FUEL SYSTEMS COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| 12/30247139 DC : 0 | BS EN ISO 10088 - SMALL CRAFT - PERMANENTLY INSTALLED FUEL SYSTEMS |
| 11/30250270 DC : 0 | BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| I.S. EN 6059-303:2017 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
| 16/30340977 DC : 0 | BS EN 2566 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 70 IRHD |
| UNE-EN 50416:2005 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric conveyor dishwashing machines |
| 11/30252275 DC : 0 | BS EN 854 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| I.S. EN 3827:2014 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 80 IRHD |
| 13/30229200 DC : 0 | BS EN ISO 6185-3 - INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER |
| PREN 14225-3 : DRAFT 2014 | DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT SYSTEMS AND COMPONENTS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 14903:2017 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| DIN ISO 3384-1:2015-12 | Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013) |
| 11/30242412 DC : 0 | BS EN 3698 - AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 70 IRHD |
| UNI EN 2844 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 90 IRHD |
| 10/30211082 DC : 0 | BS ISO 15500-2 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| NF EN 61479 : 2001 AMD 1 2003 | LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL |
| 15/30317636 DC : 0 | BS EN ISO 1401 - RUBBER HOSES FOR AGRICULTURAL SPRAYING |
| UNI EN 2842 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 70 IRHD |
| NF EN 60684 3-218 : 1998 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 218: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, NOT FLAME RETARDED, SHRINK RATIO 3:1 |
| 15/30320876 DC : 0 | BS EN 2568 - AEROSPACE SERIES - FLUOROCARBON RUBBER (FPM) - HARDNESS 90 IRHD |
| 15/30317648 DC : 0 | BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
| 15/30317663 DC : 0 | BS ISO 11759 - RUBBER HOSES AND HOSE ASSEMBLIES FOR DISPENSING LIQUEFIED PETROLEUM GASES (LPGS) - SPECIFICATION |
| 07/30160767 DC : 0 | BS EN 13463-1 - NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| 14/30314166 DC : 0 | BS EN 6109 - AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION |
| I.S. EN 3475-411:2014 | AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 411: RESISTANCE TO FLUIDS |
| CSA 6.32 : 2012 : INC : ADD A : 2013 | PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS |
| I.S. EN 2836:2012 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 50 IRHD |
| ISO 11237:2017 | Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
| 11/30242393 DC : 0 | BS EN 2841 - MINERAL OIL RESISTANT ACRYLONITRILE-BUTADIENE RUBBER (NBR) - HARDNESS GRADE 60 - CHARACTERISTICS |
| BS EN 50066:1993 | Specification for mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles |
| BS ISO 13363:2004 | Rubber and plastics hoses for marine-engine wet-exhaust systems. Specification |
| NF EN 60684 3-212 : 2006 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 212: HEAT-SHRINKABLE POLYOLEFIN SLEEVINGS |
| BS ISO 13775-2:2016 | Thermoplastic tubing and hoses for automotive use Petroleum-based-fuel applications |
| 05/30135286 DC : 0 | EN 15268 - PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND PERFORMANCE OF SUBMERSIBLE PUMP ASSEMBLIES |
| 16/30312462 DC : 0 | BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
| DIN EN 16473 E : 2015 | FIREFIGHTERS HELMETS - HELMETS FOR TECHNICAL RESCUE |
| 14/30318390 DC : 0 | BS EN 60335-2-7 ED 7.0 /A2 - OUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES |
| BS ISO/IEC 10373-1 : 2006 | IDENTIFICATION CARDS - TEST METHODS - PART 1: GENERAL CHARACTERISTICS |
| 07/30161672 DC : 0 | BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA |
| 07/30131694 DC : 0 | BS ISO 6194-4 - ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES |
| 98/711362 DC : DRAFT 98 | ISO/DIS 5092-2 - ROAD VEHICLES - CONNECTIONS FOR ON ON-BOARD ELECTRICAL WIRING HARNESSES - PART 2: DEFINITIONS, TEST METHODS AND GENERAL PERFORMANCE REQUIREMENTS |
| BS ISO 11237-1:2005 | Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Oil-based fluid applications |
| BS ISO 3384:2005 | Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures |
| 08/30195221 DC : 0 | BS EN 60684-3-282 ED.1 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 282: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, STRESS CONTROL |
| BS ISO 19378:2003 | Lubricants, industrial oils and related products (class L). Machine-tool lubricants. Categories and specifications |
| BIS IS/ISO 6722 : 2006 | ROAD VEHICLES - 60 V AND 600 V SINGLE-CORE CABLES - DIMENSIONS, TEST METHODS AND REQUIREMENTS |
| BS ISO 2929:2014 | Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification |
| UNI EN 2838 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 70 IRHD |
| BS ISO 11237-2:2006 | Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Water-based fluid applications |
| PREN 3825 : DRAFT 2006 | AEROSPACE SERIES - FLUOROSILICONE RUBBER (FVMQ) - HARDNESS 60 IRHD |
| BS EN 60684-3-340 to 342:2003 | Specification for flexible insulating sleeving. Specification requirements for individual types of sleeving Expandable braided polyethylene terephthalate textile sleeving |
| I.S. EN 60684-3-205:2011 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 205: HEAT-SHRINKABLE CHLORINATED POLYOLEFIN SLEEVING, FLAME RETARDED, NOMINAL SHRINK RATIO 1,7:1 AND 2:1 |
| I.S. EN 2845:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 50 IRHD |
| CEI EN 60335-2-5 : 2016 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-5: PARTICULAR REQUIREMENTS FOR DISHWASHERS |
| 05/30131633 DC : DRAFT APR 2005 | ISO 22435 - GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATOR - SPECIFICATION AND TYPE TESTING |
| I.S. EN 16820:2017 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
| DIN 66065:1990-08 | PRESSURE COOKERS - REQUIREMENTS, TEST METHODS |
| PREN 4840-101 : DRAFT 2017 | AEROSPACE SERIES - HEAT SHRINKABLE MOULDED SHAPES - PART 101: POLYOLEFIN, SEMI-RIGID, LIMITED FIRE HAZARD - TEMPERATURE RANGE -30 DEGREES C TO 105 DEGREES C - PRODUCT STANDARD |
| DIN EN 16678:2016-02 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| PREN 2798 : 200P1 | AEROSPACE SERIES - FLUOROCARBON RUBBER (FKM) - LOW COMPRESSIONS SET - HARDNESS 80 IRHD |
| UNI EN 2847 : 2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 70 IRHD |
| EN 13832-3:2006 | Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
| I.S. EN 2843:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 80 IRHD |
| PREN 2838 : 200P1 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESSTANSE - HARDNESS 70 IRHD |
| SAE MS 1009 : 2012 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE P PNEUMATIC TOOL OILS - SPECIFICATION |
| PREN 6109 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION |
| ISO 3862:2017 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids Specification |
| EN 50569:2013/A1:2018 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS |
| PREN 2835 : 200P1 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 40 IRHD |
| PREN 2849 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 90 IRHD |
| PREN 2839 : 200P1 | AEROSPACE SERIES - CHLOPRENE RUBBER (CR) - HEAT RESSTANSE - HARDNESS 80 IRHD |
| PREN 2848 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 80 IRHD |
| UNI EN 3102 : 2013 | AEROSPACE SERIES - SEALANTS - TEST METHODS - DETERMINATION OF LOW-TEMPERATURE FLEXIBILITY |
| BS EN ISO 7840:2013 | Small craft. Fire-resistant fuel hoses |
| ISO 3384-1:2011 | Rubber, vulcanized or thermoplastic Determination of stress relaxation in compression Part 1: Testing at constant temperature |
| PREN 2842 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - MINERAL OIL RESISTANT - HARDNESS 70 IRHD |
| PREN 3697 : 200P1 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - LOW TEMPERATURE RESISTANT - HARDNESS 60 IRHD |
| ISO 4635:2011 | Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification |
| PREN 50066 : DRAFT 2015 | MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES |
| UNE 204006:2017 | Use of insulated gloves for maneuvers on high voltage electrical installations. |
| NF EN 60684 3-216 : 2005 AMD 2 2014 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 216: HEAT-SHRINKABLE, FLAME-RETARDED, LIMITED-FIRE HAZARD SLEEVING |
| CSA E60335.2.7 : 2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-7: PARTICULAR REQUIREMENTS FOR WASHING MACHINES |
| I.S. EN 15649-7:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
| I.S. EN 61300-2-34:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-34: TESTS - RESISTANCE TO SOLVENTS AND CONTAMINATING FLUIDS OF INTERCONNECTING COMPONENTS AND CLOSURES |
| BS EN 60335-2-5:2015 | Household and similar electrical appliances. Safety Particular requirements for dishwashers |
| I.S. EN ISO 8028:2018 | RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION (ISO 8028:2017) |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| I.S. EN ISO 3949:2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| SAE USCAR 23 : 2002 | ROAD VEHICLES - 60 V AND 600 V SINGLE CORE (ISO/METRIC) CABLES - DIMENSIONS, TEST METHODS AND REQUIREMENTS |
| I.S. EN 15649-1:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| ISO 2929:2014 | Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification |
| UNI EN 334 : 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels |
| ISO 12046:2012 | Synchronous belt drives — Automotive belts — Determination of physical properties |
| ISO 17325-1:2014 | Ships and marine technology Marine environment protection Oil booms Part 1: Design requirements |
| EN ISO 7840:2013 | Small craft - Fire-resistant fuel hoses (ISO 7840:2013) |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| ISO 13363:2016 | Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification |
| I.S. EN 16678:2015 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
| EN ISO 6185-1:2001 | Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) |
| ISO 11237-1:2004 | Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications |
| UNI EN 2839 : 2013 | AEROSPACE SERIES - CHLOROPRENE RUBBER (CR) - HEAT RESISTANCE - HARDNESS 80 IRHD |
| BS EN 16436-1 : 2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| UNE-EN 16820:2018 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining |
| CSA 6.5 : 2015 | AUTOMATIC VALVES FOR GAS APPLIANCES |
| UNE-EN ISO 15584:2017 | Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO 15584:2001) |
| DIN EN ISO 8469:2013-12 | SMALL CRAFT - NON-FIRE-RESISTANT FUEL HOSES (ISO 8469:2013) |
| NF EN ISO 13590 : 2004 | SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
| I.S. EN 60684-3-343 TO 345:2002 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEETS 343 TO 345: EXPANDABLE BRAIDED ETHYLENE CHLOROTRIFLUOROETHYLENE (E-CTFE) TEXTILE SLEEVING, UNCOATED |
| I.S. EN 2849:2013 | AEROSPACE SERIES - ACRYLONITRILE-BUTADIENE RUBBER (NBR) - FUEL AND SYNTHETIC OIL RESISTANT - HARDNESS 90 IRHD |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| NF EN 60684 3-233 : 2006 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 233: HEAT-SHRINKABLE, FLUOROELASTOMER SLEEVING, FLAME-RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| EN ISO 6185-3:2014 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| NFT 60 628 : 2006 | PETROLEUM PRODUCTS AND LUBRICANTS - EVALUATION OF THE ACTION OF GREASES ON ELASTOMERS |
| EN ISO 6185-4:2011 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| ISO 24453:2008 | Rubber Acquisition and presentation of comparable single-point data |
| EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN ISO 25649-1:2017 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) |
| ONORM EN ISO 11403-3 : 2015 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014) |
| EN 343:2003+A1:2007/AC:2009 | PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
| UNE-EN ISO 21487:2013 | Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012) |
| ISO 7076-4:2016 | Fire protection Foam fire extinguishing systems Part 4: High expansion foam equipment |
| I.S. EN 14225-3:2017 | DIVING SUITS - PART 3: ACTIVELY HEATED OR COOLED SUIT SYSTEMS AND COMPONENTS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 6185-2:2002 | INFLATABLE BOATS - PART 2: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 4,5 KW TO 15 KW INCLUSIVE |
| ISO 1436-2:2005 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| I.S. EN 62329-3-102:2010 | HEAT-SHRINKABLE MOULDED SHAPES - PART 3: SPECIFICATION REQUIREMENTS FOR SHAPE DIMENSIONS, MATERIAL REQUIREMENTS AND COMPATIBILITY PERFORMANCE - SHEET 102: HEAT-SHRINKABLE ELASTOMERIC MOULDED SHAPES, SEMI-RIGID, MATERIAL REQUIREMENTS AND SYSTEM PERFORMANCE |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| EN 60335-2-5:2015 | Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers |
| ISO 16380:2014 | Road vehicles — Blended fuels refuelling connector |
| I.S. EN ISO 21487:2012 | SMALL CRAFT - PERMANENTLY INSTALLED PETROL AND DIESEL FUEL TANKS (ISO 21487:2012) |
| I.S. EN 60684-3-233:2006 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 233: HEAT-SHRINKABLE FLUOROELASTOMER SLEEVING, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| EN 62282-6-100:2010/A1:2012 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010/A1:2012) |
| EN 60684-3-340 to 342:2003 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving |
| EN 60684-3-216:2005/A2:2014 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 216: HEAT-SHRINKABLE, FLAME-RETARDED, LIMITED-FIRE HAZARD SLEEVING (IEC 60684-3-216:2001 + CORRIGENDUM 2003 + A1:2005) |
| EN 50571:2013/A1:2018 | Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines |
| DIN EN 14125:2013-09 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| IEC 60684-3-233:2006 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| ISO 20344:2011 | Personal protective equipment Test methods for footwear |
| UNE-EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| ISO 18752:2014 | Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification |
| ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
| BS EN 443:2008 | Helmets for fire fighting in buildings and other structures |
| BS EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification |
| BS EN 1825-1:2004 | Grease separators Principles of design, performance and testing, marking and quality control |
| IEC 60684-3-218:1998 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 218: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:1 |
| BS EN ISO 175:2010 | Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals |
| BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
| BS EN 854:2015 | Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification |
| ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
| ISO 5774:2016 | Plastics hoses — Textile-reinforced types for compressed-air applications — Specification |
| IEC 61111:2009 | Live working - Electrical insulating matting |
| IEC 60684-3-211:2007 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 |
| BS EN ISO 14113:2013 | Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| BS EN ISO 6808:2014 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification |
| BS EN 858-1:2002 | Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control |
| BS EN 1761:1999 | Rubber hoses and hose assemblies for fuel truck delivery. Specification |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 12067-1 : 98 AMD 1 2003 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES |
| EN 60684-3-217:1998 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 217: Heat-shrinkable polyolefin sleeving, flame retarded shrink ratio 3:1 |
| DIN EN 443:2008-06 | Helmets for fire fighting in buildings and other structures |
| UNI EN 12115 : 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 857:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| EN 50066:1992 | Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles |
| DIN EN 1762:2004-07 | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| DIN EN 854:2016-09 | RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED HYDRAULIC TYPE - SPECIFICATION |
| EN 60684-3-248:2007 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 |
| EN 62329-3-102:2010 | Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance |
| DIN EN ISO 13590:2004-11 | SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS |
| EN 60684-3-233:2006/corrigendum:2006 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 233: HEAT-SHRINKABLE FLUOROELASTOMER SLEEVING, FLAME RETARDED, FLUID RESISTANT, SHRINK RATIO 2:1 |
| DIN ISO 3384:2008-07 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATION IN COMPRESSION AT AMBIENT AND AT ELEVATED TEMPERATURES |
| EN 50416 : 2005 AMD 1 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES |
| EN 60684-3-246:2007 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded |
| DIN EN 12067-1:1998-12 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES |
| EN 60684-3-165:2004 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving |
| DIN EN 849:1999-06 | TRANSPORTABLE GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| DIN EN ISO 11403-3:2002-02 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014) |
| DIN EN 343:2010-05 | PROTECTIVE CLOTHING - PROTECTION AGAINST RAIN |
| EN 60684-3-343 to 345:2002 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated |
| DIN EN 483:2000-06 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| DIN EN 1825-1:2004-12 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| EN 60903 : 2003 COR 2005 | LIVE WORKING - GLOVES OF INSULATING MATERIAL |
| EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| DIN EN 13913:2003-08 | RAILWAY APPLICATIONS - RUBBER SUSPENSION COMPONENTS - ELASTOMER-BASED MECHANICAL PARTS |
| DIN EN 12067-1 : 1998 AMD 1 2003 | GAS/AIR RATIO CONTROLS FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 1: PNEUMATIC TYPES |
| EN 60335-2-75:2004/A12:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| EN 60335-2-58:2005/A12:2016 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES (IEC 60335-2-58:2002, MODIFIED) |
| EN 60684-3-213:1999 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 213: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 2:1 |
| EN 60684-3-205:2011 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1 |
| DIN EN ISO 6185-2:2002-06 | INFLATABLE BOATS - PART 2: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 4,5 KW TO 15 KW INCLUSIVE |
| ONORM EN ISO 12736 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| OVE/ONORM EN 60335-2-75 : 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES |
| PREN 6095 : 200P1 | AEROSPACE SERIES - ROTARY FASTENERS - STRUCTURAL AND NON-STRUCTURAL APPLICATIONS - TECHNICAL SPECIFICATION |
| ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| AS/NZS 1335:2020 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
| ISO 13226:2011 | Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| ASTM D 5964 : 2016 : REDLINE | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
| AS/NZS IEC 60092.360:2020 | Electrical installations in ships Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables |
| AS/NZS IEC 61111:2020 | Live working - Electrical insulating mats |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO/TR 9272:2005 | Rubber and rubber products Determination of precision for test method standards |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.