• There are no items in your cart

ISO 19867-1:2018

Current
Current

The latest, up-to-date edition.

Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English

Published date

06-04-2018

This document is applicable to cookstoves used primarily for cooking or water heating in domestic, small-scale enterprise, and institutional applications, typically with firepower less than 20 kW and cooking vessel volume less than 150 l, excluding cookstoves used primarily for space heating. For solar cookstoves, the provisions of this document are applicable only for evaluating cooking power, safety, and durability. Solar cookstoves have zero on-site emissions, and their cooking power can be determined according to ASAE S 580.1. This document does not cover electric stoves. Safety evaluation of electric stoves can be found in IEC 60335-2-6[62].

This document specifies laboratory measurement and evaluation methods for

a) particulate and gaseous air pollutant emissions,

b) energy efficiency,

c) safety, and

d) durability of cookstoves.

This document does not include evaluation of off-gassing from manufacturing oils, coatings, adhesives, and other materials (which can be found in ISO 10377 and ISO 14159). This document does not include evaluation of safety for cookstoves designed to burn a liquid and/or gaseous fuel, such as LPG (liquefied petroleum gas), alcohol, plant oil, kerosene, etc. Safety evaluation of gas-fuelled cookstoves can be found in ISO 23550 and ISO 23551 (all parts). This document does not include durability evaluation of rechargeable batteries in fan-assisted cookstoves. This document provides a standard test sequence to establish international comparability in measurement of cookstove emissions and efficiency. Guidelines for reporting results from the laboratory measurement and evaluation methods are described. For cookstoves used in applications covered by additional requirements (e.g., local air quality and safety regulations), additional test conditions and special evaluation methods may apply.

Committee
ISO/TC 285
DevelopmentNote
Supersedes ISO/DIS 19867-1. (06/2018)
DocumentType
Standard
Pages
121
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
BS ISO 19867-1:2018 Identical
NEN-ISO 19867-1:2018 Identical

BS 845-1:1987 Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids Concise procedure
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 12141:2002 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
IEC 60335-2-6:2014 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
ASTM D 3176 : 2015 : REDLINE Standard Practice for Ultimate Analysis of Coal and Coke
ISO 13061-1:2014 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests
ASTM D 3045 : 1992 PRACTICE FOR HEAT AGING OF PLASTICS WITHOUT LOAD
ISO 14780:2017 Solid biofuels — Sample preparation
ISO 2854:1976 Statistical interpretation of data — Techniques of estimation and tests relating to means and variances
ISO 16269-7:2001 Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals
ISO 23210:2009 Stationary source emissions Determination of PM10/PM2,5 mass concentration in flue gas Measurement at low concentrations by use of impactors
ISO 29904:2013 Fire chemistry Generation and measurement of aerosols
ISO 16559:2014 Solid biofuels Terminology, definitions and descriptions
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
ISO 16948:2015 Solid biofuels Determination of total content of carbon, hydrogen and nitrogen
ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 18134-3:2015 Solid biofuels — Determination of moisture content — Oven dry method — Part 3: Moisture in general analysis sample
ISO 14993:2001 Corrosion of metals and alloys Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions
ASTM D 4442 : 2016 : REDLINE Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ISO 2602:1980 Statistical interpretation of test results Estimation of the mean Confidence interval
ISO 25597:2013 Stationary source emissions Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
ISO 12569:2017 Thermal performance of buildings and materials — Determination of specific airflow rate in buildings — Tracer gas dilution method
ISO 18122:2015 Solid biofuels — Determination of ash content
ISO 16000-26:2012 Indoor air — Part 26: Sampling strategy for carbon dioxide (CO2)
ASTM D 5373 : 2016 : REDLINE Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
ISO 16183:2002 Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
ISO 14044:2006 Environmental management Life cycle assessment Requirements and guidelines
ISO 5167-2:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates
ISO 4530:1983 Vitreous and porcelain enamelled manufactured articles — Determination of resistance to heat
ISO 14159:2002 Safety of machinery — Hygiene requirements for the design of machinery
ISO 12039:2001 Stationary source emissions Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas Performance characteristics of automated measuring systems
ISO 18135:2017 Solid Biofuels — Sampling
ISO 11845:1995 Corrosion of metals and alloys General principles for corrosion testing
ISO 29461-1:2013 Air intake filter systems for rotary machinery Test methods Part 1: Static filter elements
ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
ISO 18134-2:2017 Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total moisture — Simplified method
ISO 80000-1:2009 Quantities and units — Part 1: General
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 18125:2017 Solid biofuels — Determination of calorific value
ISO 21608:2012 Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
ASTM D 2794 : 1993 TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT)
ISO 18123:2015 Solid biofuels — Determination of the content of volatile matter
ISO 10377:2013 Consumer product safety — Guidelines for suppliers
ISO 17225-1:2014 Solid biofuels Fuel specifications and classes Part 1: General requirements
ISO 18134-1:2015 Solid biofuels — Determination of moisture content — Oven dry method — Part 1: Total moisture — Reference method
ISO 16911-2:2013 Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 2: Automated measuring systems
ISO 10780:1994 Stationary source emissions — Measurement of velocity and volume flowrate of gas streams in ducts
ASTM E 778 : 2015 : REDLINE Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples
ASTM C 1171 : 2016 : REDLINE Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
ISO 3966:2008 Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes
ISO 10396:2007 Stationary source emissions — Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
ISO 14040:2006 Environmental management Life cycle assessment Principles and framework
ASTM D 6944 : 2015 : REDLINE Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
ASTM D 3359 : 2017 : REDLINE Standard Test Methods for Rating Adhesion by Tape Test
ISO 27891:2015 Aerosol particle number concentration — Calibration of condensation particle counters
ISO 3129:2012 Wood Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens
ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
ISO 4536:1985 Metallic and non-organic coatings on metallic substrates Saline droplets corrosion test (SD test)
ISO 21501-1:2009 Determination of particle size distribution — Single particle light interaction methods — Part 1: Light scattering aerosol spectrometer
ISO 23550:2011 Safety and control devices for gas burners and gas-burning appliances General requirements
ISO 15900:2009 Determination of particle size distribution Differential electrical mobility analysis for aerosol particles
ISO 8186:1989 Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
ISO 3534-1:2006 Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability
ISO 4224:2000 Ambient air — Determination of carbon monoxide — Non-dispersive infrared spectrometric method

View more information
US$251.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.