ISO 1999:2013
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Russian, English
09-23-2013
ISO 1999:2013 specifies a method for calculating the expected noise-induced permanent threshold shift in the hearing threshold levels of adult populations due to various levels and durations of noise exposure; it provides the basis for calculating hearing disability according to various formulae when the hearing threshold levels at commonly measured audiometric frequencies, or combinations of such frequencies, exceed a certain value.
The measure of exposure to noise for a population at risk is the noise exposure level normalized to a nominal 8 h working day, LEX,8h, for a given number of years of exposure. ISO 1999:2013 applies to noise at frequencies less than approximately 10 kHz which is steady, intermittent, fluctuating, irregular. Use of ISO 1999:2013 for sound pressures exceeding 200 Pa (140 dB relative to 20 Pa) is recognized as extrapolation.
DevelopmentNote |
Supersedes ISO/DIS 1999. (09/2013)
|
DocumentType |
Standard
|
Pages |
24
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS ISO 1999:2013 | Identical |
NEN ISO 1999 : 2016 | Identical |
ANSI/ASA S3.44 PART 1 : 2016 | Identical |
PN-ISO 1999:2022-12 | Identical |
IS 7194 : 2018 | Identical |
UNI ISO 1999 : 2015 | Identical |
PN ISO 1999 : 2000 | Identical |
NFS 31 013 : 1985 | Similar to |
SNV ISO 1999 : 1990 | Identical |
NBN ISO 1999 : 1992 | Identical |
UNE 74023:1992 | Similar to |
DIN EN ISO 9612 E : 2009 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
CSA C22.2 No. 601.2.33 : 0 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSIS |
ANSI S3.28 : 86 DRAFT | EVALUATION OF THE POTENTIAL EFFECT ON HUMAN HEARING OF SOUNDS WITH PEAK-A-WEIGHTED SOUND PRESSURE LEVELS ABOVE 120 DECIBELS AND PEAK-C-WEIGHTED SOUND PRESSURE LEVELS BELOW 140 DECIBELS, |
BS EN 16603-10-11:2014 | Space engineering. Human factors engineering |
PD ISO/TS 16976-7:2013 | Respiratory protective devices. Human factors Hearing and speech |
I.S. EN 415-9:2009 | SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3 |
UNI EN ISO 28802 : 2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE |
NFPA 130 : 2017 | FIXED GUIDEWAY TRANSIT AND PASSENGER RAIL SYSTEMS |
BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
EN 45510-5-2 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES |
DIN ISO 230-5:2006-03 | Test code for machine tools - Part 5: Determination of the noise emission (ISO 230-5:2000) |
EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
DGUV INFORMATION 209-023 : 2013 | |
EN 300 176-2 : 2.2.1 | DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); TEST SPECIFICATION; PART 2: AUDIO AND SPEECH |
BS 8233:1987 | Code of practice for sound insulation and noise reduction for buildings |
DIN EN ISO 28802:2012-06 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
BS 6086:1981 | Method of measurement of noise inside motor vehicles |
15/30297064 DC : DRAFT MAY 2015 | BS ISO 7029 - ACOUSTICS - STATISTICAL DISTRIBUTION OF HEARING THRESHOLDS RELATED TO AGE AND GENDER |
BS EN 415-9:2009 | Safety of packaging machines Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
STANAG 2899 : 2001 | PROTECTION OF HEARING |
I.S. EN 16603-10-11:2014 | SPACE ENGINEERING - HUMAN FACTORS ENGINEERING |
UNI EN 415-9 : 2010 | SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3 |
I.S. EN ISO 9612:2009 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
EN ISO 11690-1 : 1996 | ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - NOISE CONTROL STRATEGIES |
I.S. EN ISO 7029:2017 | ACOUSTICS - STATISTICAL DISTRIBUTION OF HEARING THRESHOLDS RELATED TO AGE AND GENDER (ISO 7029:2017) |
BS 7445-1:2003 | Description and measurement of environmental noise Guide to quantities and procedures |
BS 6739:2009 | Code of practice for instrumentation in process control systems: installation design and practice |
DIN EN ISO 17776:2003-09 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - GUIDELINES ON TOOLS AND TECHNIQUES FOR HAZARD IDENTIFICATION AND RISK ASSESSMENT |
VDI 3766:2012-09 | Ultrasound - Workplace - Measurement, assessment, judgement and reduction |
DIN EN 415-9:2010-02 | Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
BS ISO 15664:2001 | Acoustics. Noise control design procedures for open plant |
BS EN ISO 9612:2009 | Acoustics. Determination of occupational noise exposure. Engineering method |
BS EN 60215:1996 | Safety requirements for radio transmitting equipment |
BS EN 61252 : 1997 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
CEI UNI EN 45510-5-2 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES |
BS EN ISO 24504:2016 | Ergonomics. Accessible design. Sound pressure levels of spoken announcements for products and public address systems |
07/30137110 DC : 0 | ISO 9612 - ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
08/30136724 DC : DRAFT MAY 2008 | BS 6739 - CODE OF PRACTICE FOR INSTRUMENTATION IN PROCESS CONTROL SYSTEMS - INSTALLATION DESIGN AND PRACTICE |
NFS 31 084 : 2002 | ACOUSTICS - METHOD FOR MEASURING NOISE EXPOSURE LEVELS IN WORK ENVIRONMENTS |
I.S. EN ISO 28802:2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE (ISO 28802:2012) |
BS 7445-1:1991 | Description and measurement of environmental noise Guide to quantities and procedures |
CSA ISO 1996-3 : 2005 | ACOUSTICS - DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL NOISE - PART 3: APPLICATION TO NOISE LIMITS |
DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
ISO 9612:2009 | Acoustics Determination of occupational noise exposure Engineering method |
ISO 28802:2012 | Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
EEMUA 141 : 2014 | GUIDE TO THE USE OF EEMUA 140 NOISE PROCEDURE SPECIFICATION |
CSA ISO 1996-1 : 2005 | ACOUSTICS - DESCRIPTION, MEASUREMENT AND ASSESSMENT OF ENVIRONMENTAL NOISE - PART 1: BASIC QUANTITIES AND ASSESSMENT PROCEDURES |
UNI EN 13861 : 2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
EN 45510-5-2:1998 | Guide for procurement of power station equipment - Part 5-2: Gas turbines |
09/30191965 DC : 0 | BS ISO 28802 - ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENT OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE |
ISO/TS 16976-7:2013 | Respiratory protective devices Human factors Part 7: Hearing and speech |
DIN ISO 5128:1984-11 | ACOUSTICS - MEASUREMENT OF NOISE INSIDE MOTOR VEHICLES |
12/30234183 DC : 0 | BS ISO 24504 - ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF SPOKEN ANNOUNCEMENTS FOR PRODUCTS AND PUBLIC ADDRESS SYSTEMS |
BS EN ISO 28802:2012 | Ergonomics of the physical environment. Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
I.S. EN ISO 24504:2016 | ERGONOMICS - ACCESSIBLE DESIGN - SOUND PRESSURE LEVELS OF SPOKEN ANNOUNCEMENTS FOR PRODUCTS AND PUBLIC ADDRESS SYSTEMS (ISO 24504:2014) |
UNI ISO 230-5 : 2010 | TEST CODE FOR MACHINE TOOLS - PART 5: DETERMINATION OF THE NOISE EMISSION |
UNI TR 11326 : 2009 | Acoustics - Evaluation of the uncertainty of measurements and calculations in acoustics - Parte 1: General concepts |
SAE J 1166 : 2014 | SOUND MEASUREMENT-OFF-ROAD SELF-PROPELLED WORK MACHINES OPERATOR-WORK CYCLE |
BS 3863:1979 | Guide for gas turbines procurement |
ISO 1996-1:2016 | Acoustics Description, measurement and assessment of environmental noise Part 1: Basic quantities and assessment procedures |
IEC 60215:2016 | Safety requirements for radio transmitting equipment - General requirements and terminology |
ISO 7029:2017 | Acoustics — Statistical distribution of hearing thresholds related to age and gender |
IEC 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
BS EN ISO 7029:2017 | Acoustics. Statistical distribution of hearing thresholds related to age and gender |
BS EN 45510-5-2:1998 | Guide for the procurement of power station equipment Gas turbines |
BS EN ISO 11690-1:1997 | Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control strategies |
00/565497 DC : DRAFT DEC 2000 | BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE |
ISO 24504:2014 | Ergonomics Accessible design Sound pressure levels of spoken announcements for products and public address systems |
IEC 61252:1993+AMD1:2000+AMD2:2017 CSV | Electroacoustics - Specifications for personal sound exposure meters |
UNE-EN ISO 7029:2017 | Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO 7029:2017) |
EN 61252:1995/A2:2017 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS (IEC 61252:1993/A2:2017) |
EN ISO 7029:2017 | Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO 7029:2017) |
EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
EN ISO 28802:2012 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
EN ISO 9612:2009 | Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009) |
EN ISO 24504:2016 | Ergonomics - Accessible design - Sound pressure levels of spoken announcements for products and public address systems (ISO 24504:2014) |
EN 16603-10-11:2014 | Space engineering - Human factors engineering |
EN 415-9:2009 | Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
CSA Z94.2 : 2014 | HEARING PROTECTION DEVICES - PERFORMANCE, SELECTION, CARE, AND USE |
DIN EN ISO 9612:2009-09 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
UNI EN ISO 9612 : 2011 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
UNE-EN 415-9:2010 | Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
13/30275203 DC : 0 | BS ISO 1996-1 - ACOUSTICS - DESCRIPTION, MEASUREMENT AND ASSESSMENT OF ENVIRONMENTAL NOISE - PART 1: BASIC QUANTITIES AND ASSESSMENT PROCEDURES |
NF EN 45510 5-2 : 1998 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: TURBINES - GAS TURBINES |
UNI 9432 : 2011 | Acoustics - Determination ooccupational noise exposure |
UNI EN 16603-10-11 : 2014 | SPACE ENGINEERING - HUMAN FACTORS ENGINEERING |
I.S. EN 61252:1996 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
I.S. EN 60519-1:2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
ISO 11690-1:1996 | Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies |
PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
ISO 5128:1980 | Acoustics — Measurement of noise inside motor vehicles |
BS 6402(1994) : 1994 AMD 9323 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
BS 3192(1990) : 1990 AMD 9197 | SPECIFICATION FOR SAFETY REQUIREMENTS FOR RADIO TRANSMITTING EQUIPMENT |
BS 3192(1996) : 1996 | SAFETY REQUIREMENTS FOR RADIO TRANSMITTING EQUIPMENT |
ISO 11466:1995 | Soil quality — Extraction of trace elements soluble in aqua regia |
ISO/TR 25417:2007 | Acoustics Definitions of basic quantities and terms |
ISO 389-1:1998 | Acoustics Reference zero for the calibration of audiometric equipment Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones |
ISO 8253-1:2010 | Acoustics Audiometric test methods Part 1: Pure-tone air and bone conduction audiometry |
ISO 9612:2009 | Acoustics Determination of occupational noise exposure Engineering method |
ISO 389-2:1994 | Acoustics Reference zero for the calibration of audiometric equipment Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
ISO 7029:2017 | Acoustics — Statistical distribution of hearing thresholds related to age and gender |
AS ISO 7029:2019 | Acoustics - Statistical distribution of hearing thresholds related to age and gender |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.