ISO 22007-1:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
03-01-2024
Language(s)
English, French
Published date
10-13-2017
ISO 22007-1:2017 describes the background to methods for the determination of the thermal conductivity and thermal diffusivity of polymeric materials. Different techniques are available for these measurements and some may be better suited than others for a particular type, state and form of material. ISO 22007-1:2017 provides a broad overview of these techniques. Standards specific to these techniques, as referenced in this document, are used to carry out the actual test method.
| Committee |
ISO/TC 61/SC 5
|
| DevelopmentNote |
Supersedes ISO/DIS 22007-1. (10/2017)
|
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| I.S. EN ISO 22007-1:2012 | Identical |
| DIN EN ISO 22007-1:2016-08 (Draft) | Identical |
| UNI EN ISO 22007-1:2018 | Identical |
| UNI EN ISO 22007-1 : 2012 | Identical |
| BS EN ISO 22007-1:2012 | Identical |
| DIN EN ISO 22007-1:2018-03 | Identical |
| EN ISO 22007-1:2017 | Identical |
| ONORM EN ISO 22007-1 : 2018 | Identical |
| NEN ISO 22007-1 : 2009 | Identical |
| NF EN ISO 22007-1 : 2017 | Identical |
| UNE-EN ISO 22007-1:2012 | Identical |
| SN EN ISO 22007-1 : 2018 | Identical |
| PN EN ISO 22007-1 : 2018 | Identical |
| I.S. EN ISO 22007-1:2017 | Identical |
| NEN EN ISO 22007-1 : 2017 | Identical |
| UNE-EN ISO 22007-1:2018 | Identical |
| DS EN ISO 22007-1 : 2017 | Identical |
| NBN EN ISO 22007-1 : 2012 | Identical |
| BS EN ISO 22007-1:2017 | Identical |
| NS EN ISO 22007-1 : 2017 | Identical |
| DIN EN ISO 22007-6 E : 2015 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
| 12/30242502 DC : DRAFT MAR 2012 | BS ISO 16525-3 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 3: DETERMINATION OF HEAT TRANSFER PROPERTIES |
| ISO 16525-3:2014 | Adhesives Test methods for isotropic electrically conductive adhesives Part 3: Determination of heat-transfer properties |
| I.S. EN ISO 22007-2:2015 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO 22007-2:2015) |
| I.S. EN 62333-3:2010 | NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET |
| UNE-EN ISO 22007-4:2017 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017) |
| EN 62333-3:2010 | Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet |
| ONORM EN ISO 22007-2 : 2015 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO 22007-2:2015) |
| BS EN 62333-3:2010 | Noise suppression sheet for digital devices and equipment Characterization of parameters of noise suppression sheet |
| BS EN ISO 22007-4:2017 | Plastics. Determination of thermal conductivity and thermal diffusivity Laser flash method |
| 13/30257555 DC : 0 | BS EN ISO 22007-2 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO/DIS 22007-2:2013) |
| PREN ISO 22007-2 : DRAFT 2013 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO/DIS 22007-2:2013) |
| I.S. EN ISO 22007-4:2017 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017) |
| I.S. EN ISO 22007-3:2012 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD (ISO 22007-3:2008) |
| DIN EN ISO 22007-6:2015-05 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
| DIN EN ISO 22007-4:2016-10 (Draft) | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017) |
| BS EN ISO 22007-6:2015 | Plastics. Determination of thermal conductivity and thermal diffusivity Comparative method for low thermal conductivities using a temperature-modulation technique |
| BS EN ISO 22007-2:2015 | Plastics. Determination of thermal conductivity and thermal diffusivity Transient plane heat source (hot disc) method |
| DIN EN ISO 22007-2:2015-12 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015) |
| BS ISO 22007-6 : 2014 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE |
| 16/30337302 DC : 0 | BS EN ISO 22007-4 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD |
| PD CEN ISO/TR 22007-5:2014 | Plastics. Determination of thermal conductivity and thermal diffusivity Results of interlaboratory testing of poly(methyl methacrylate) samples |
| CEI EN 62333-3 : 2011 | NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET |
| UNE-EN ISO 22007-6:2015 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014) |
| EN ISO 22007-4:2017 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017) |
| DIN EN ISO 22007-3:2012-04 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008) |
| 13/30259881 DC : 0 | BS ISO 22007-6 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE |
| I.S. EN ISO 22007-6:2015 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014) |
| ISO/TR 22007-5:2011 | Plastics Determination of thermal conductivity and thermal diffusivity Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples |
| ISO 22007-6:2014 | Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique |
| ISO 22007-3:2008 | Plastics Determination of thermal conductivity and thermal diffusivity Part 3: Temperature wave analysis method |
| IEC 62333-3:2010 | Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet |
| ISO 22007-2:2015 | Plastics Determination of thermal conductivity and thermal diffusivity Part 2: Transient plane heat source (hot disc) method |
| EN ISO 22007-3:2012 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008) |
| EN ISO 22007-6:2015 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014) |
| EN ISO 22007-2:2015 (edition 2) | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015) |
| BS EN ISO 22007-3:2012 | Plastics. Determination of thermal conductivity and thermal diffusivity Temperature wave analysis method |
| UNI EN ISO 22007-3 : 2012 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD |
| BS ISO 16525-3:2014 | Adhesives. Test methods for isotropic electrically conductive adhesives Determination of heat-transfer properties |
| 06/30132356 DC : DRAFT FEB 2006 | ISO 22007-4 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD |
| UNE-EN ISO 22007-2:2016 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015) |
| NF EN ISO 22007-3 : 2012 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD |
| S.R. CEN ISO/TR 22007-5:2014 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 5: RESULTS OF INTERLABORATORY TESTING OF POLY(METHYL METHACRYLATE) SAMPLES (ISO/TR 22007-5:2011) |
| ISO 22007-4:2017 | Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method |
| CEN ISO/TR 22007-5:2014 | Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011) |
| DIN EN ISO 22007-4:2012-04 | PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017) |
| ASTM D 5930 : 2017 : REDLINE | Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique |
| ASTM C 518 : 2017 : REDLINE | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ISO 8894-2:2007 | Refractory materials Determination of thermal conductivity Part 2: Hot-wire method (parallel) |
| ASTM E 1461 : 2013 : REDLINE | Standard Test Method for Thermal Diffusivity by the Flash Method |
| ISO 8894-1:2010 | Refractory materials Determination of thermal conductivity Part 1: Hot-wire methods (cross-array and resistance thermometer) |
| ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
| ISO 8301:1991 | Thermal insulation Determination of steady-state thermal resistance and related properties Heat flow meter apparatus |
| ISO 472:2013 | Plastics Vocabulary |
| ISO 22007-2:2015 | Plastics Determination of thermal conductivity and thermal diffusivity Part 2: Transient plane heat source (hot disc) method |
| ASTM C 1113 : 1999 | Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique) |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.