ISO 286-1 : 2010(R2015)

Current

Current The latest, up-to-date edition.

Preview

GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS

Publisher: International Organization for Standardization

Published: 01-01-2010

Available Formats: PDF - Russian, Hardcopy - Russian, PDF - English, Hardcopy - English, PDF - Russian - English - French, Hardcopy - Russian - English - French
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 ISO code system for tolerances on linear sizes
5 ISO fit system
Annex A (informative) - Further information about the
ISO system of limits and fits and former practice
Annex B (informative) - Examples of the use of ISO 286-1
to determine fits and tolerance classes
Annex C (informative) - Relationship to the GPS matrix model
Bibliography

Abstract - (Show below) - (Hide below)

Specifies the ISO code system for tolerances to be used for linear sizes of features of the following types: a) cylinder; b) two parallel opposite surfaces.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Revision
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 213
Supersedes	NS 1556.1 : 1963 ISO 1829 : 1975 NS 1550 : 1963 NS 1558 : 1966 ISO 286-1 : 1988 NS 1559 : 1968 NS 1560 : 1968 ISO/DIS 286-1 : 60.00 (2010) NS 1552 : 1963 NS 1556.2 : 1963 NS 1555.1 : 1963 NS 1557 : 1966 NS 1555.3 : 1963 NFE 02 104 : 1965 NS 1556.3 : 1963 NS 1555.2 : 1963 NFE 02 100 : 1970 NFE 02 111 : 1965 NS 1551 : 1964 ISO R 286 : 1962

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NEN EN ISO 286-1 : 2010 C1 2013	Identical
ONORM EN ISO 286-1 : 2014	Identical
PN EN ISO 286-1 : 2011 AC 2016	Identical
NEN-EN-ISO 286-1 : 2010	Identical
I.S. EN ISO 286-1:2010	Identical
DIN EN ISO 286-1 : 2010	Identical
PN-EN ISO 286-1 : 2011	Identical
BS EN ISO 286-1 : 2010	Identical
DS EN ISO 286-1 : 2013 COR 2013	Identical
DIN EN ISO 286-1 E : 2010	Identical
UNE EN ISO 286-1 : 2011	Identical
EN ISO 286-1 : 2010 COR 2013	Identical
BIS IS 919-1 : 2014	Identical
NF EN ISO 286-1 : 2010	Identical
NS EN ISO 286-1 : 2010 AC 2013	Identical
SN EN ISO 286-1 : 2010 CORR 2013	Identical
UNI EN ISO 286-1 : 2010	Identical
DS/EN ISO 286-1 : 2013	Identical
NBN EN ISO 286-1 : 2010 COR 2013	Identical
SS-EN ISO 286-1 : 2010	Identical
SN EN ISO 286-1 : 2010	Identical
JIS B 0401-1:2016	Identical
BIS IS 919-1 : 2014	Identical
PN EN 20286-1 : 1996	Identical
NS EN ISO 286-1 : 2010 AC 2013	Identical
BS 4500-1.1(1990) : AMD 7630	Identical
UNE EN ISO 286-1 : 2011	Identical
NF EN ISO 286-1 : 2010	Identical
SN EN ISO 286-1 : 2010 CORR 2013	Identical
BS EN 20286-1 : 1993	Identical
DS/EN ISO 286-1 : 2013	Identical
NEN-EN-ISO 286-1 : 2010	Identical
PN EN ISO 286-1 : 2011 AC 2016	Identical
NEN EN ISO 286-1 : 2010 C1 2013	Identical
UNI EN ISO 286-1 : 2010	Identical
JIS B 0401-1:2016	Identical
PN-EN ISO 286-1 : 2011	Identical
SN EN ISO 286-1 : 2010	Identical
BS EN ISO 286-1 : 2010	Identical
NBN EN ISO 286-1 : 2010 COR 2013	Identical
DIN EN ISO 286-1 : 2010-11	Identical
SS-EN ISO 286-1 : 2010	Identical
ONORM EN ISO 286-1 : 2014	Identical
DS EN ISO 286-1 : 2013 COR 2013	Identical
SANS 286-1 : 1ED 1988(R2007)	Identical
DIN ISO 286-1 : 1990-11	Identical
DIN EN ISO 286-1 E : 2010	Identical
NEN ISO 286-1 : 1989 C1 1994	Identical
I.S. EN ISO 286-1:2010	Identical
ABMA 7 : 1995	Corresponds
NS ISO 286-1 : 1988	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN ISO 8015 : 1986-06	TECHNICAL DRAWINGS - FUNDAMENTAL TOLERANCING PRINCIPLE
DIN 1850-5 E : 1998	PLAIN BEARINGS - PART 5: THERMOSET PLASTIC BUSHES
DIN ISO 8062 : 1998	CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES
05/30070377 DC : DRAFT OCT 2005	ISO 10441 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLEXIBLE COUPLINGS FOR MECHANICAL POWER TRANSMISSION - SPECIAL PURPOSE APPLICATIONS
BS ISO 12301 : 2007	PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS
I.S. EN ISO 8434-1:2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS EN 62074-1 : 2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
DIN ISO 3601-2 : 2010	FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSIONS FOR GENERAL APPLICATIONS
DIN SPEC 91184 E : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
UNE EN 10088-5 : 2010	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
DIN EN ISO 1938-1 : 2016	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015)
DIN EN 10088-5 E : 2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
DIN ISO 29262 : 2013	PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN END EFFECTOR AND HANDLING SYSTEM (ISO 29262:2011)
BS ISO 4639-2 : 1995	RUBBER TUBING AND HOSES FOR FUEL CIRCUITS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
DIN ISO 29262 E : 2013	PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN END EFFECTOR AND HANDLING SYSTEM (ISO 29262:2011)
DIN ISO 8489-5 E : 1997	TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 5: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE OF 5 DEGREES 57 MINUTES
DIN ISO 8062 E : 1998	CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES
08/30184280 DC : DRAFT SEP 2008	BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
BS EN 62134-1 : 2009	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
BS QC 480000(1995) : 1995	CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION
09/30199223 DC : DRAFT JAN 2009	BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
BS ISO 17296-3 : 2014	ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS
15/30325929 DC : 0	BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
16/30341970 DC : 0	BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
10/30234318 DC : DRAFT DEC 2010	BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN
99/702254 DC : DRAFT JAN 1999	ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE
PREN 13236 : DRAFT 2017	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
09/30197465 DC : 0	BS ISO 6489-5 - AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS
14/30279051 DC : 0	BS EN ISO 15848-1 - INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES
CEI EN 62496-1 : 2010	OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
BS ISO 8131 : 1992	HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES - TOLERANCES
03/301350 DC : DRAFT JAN 2003	ISO 5744 - PLIERS AND NIPPERS - METHODS OF TEST
ISO 1174-2 : 1996(R2014)	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 2: DRIVING SQUARES FOR POWER SOCKET TOOLS
15/30296029 DC : 0	BS ISO 4955 - HEAT-RESISTANT STEELS
15/30321721 DC : DRAFT MAY 2015	BS ISO 6621-1 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY
BS ISO 16589-4 : 2011	ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES
DIN EN ISO 8062-3 E : 2008	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
BS EN ISO 1938-2 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
08/30163745 DC : DRAFT SEP 2008	BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN
NBR ISO 13942 : 2014	BONDED ABRASIVE PRODUCTS - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES
10/30165662 DC : 0	BS ISO 13706 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIRCOOLED HEAT EXCHANGERS
BS EN 60876-1 : 2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
14/30304194 DC : 0	BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTICFILTERS - GENERIC SPECIFICATION
BS ISO 14368-2 : 2003	MINERAL AND SAPPHIRE WATCH-GLASSES - ASSEMBLY TO THE CASE BY ADHESIVE OR USING A GASKET
ISO 3764 : 2016	TIMEKEEPING INSTRUMENTS - MOVEMENTS - TYPES, DIMENSIONS AND NOMENCLATURE
I.S. EN 61202-1:2017	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
16/30353588 DC : 0	BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 60740-1 : 2005	LAMINATIONS FOR TRANSFORMERS AND INDUCTORS - PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS
16/30335541 DC : 0	BS ISO 3548-2 - PLAIN BEARINGS - THIN-WALLED HALF BEARINGS WITH OR WITHOUT FLANGE - PART 2: MEASUREMENT OF WALL THICKNESS AND FLANGE THICKNESS
UNE-EN 15566:2017	RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
01/712196 DC : DRAFT SEP 2001	ISO 5145 - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING
DD ISO/TS 23768-1 : 2011	ROLLING BEARINGS - PART 1: REFERENCE DICTIONARY FOR ROLLING BEARINGS
05/30135789 DC : DRAFT JUL 2005	EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
04/300984 DC : DRAFT JAN 2004	BS ISO 4955 - HEAT-RESISTING STEELS
ISO 16589-4 : 2011(R2016)	ROTARY SHAFT LIP-TYPE SEALS INCORPORATING THERMOPLASTIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES
06/30145636 DC : DRAFT JULY 2006	ISO 3547-5 - PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER
BS 2547-6(1978) : 1978	SPECIFICATION FOR BASIC DIMENSIONS OF CONES AND TUBES FOR WINDING TEXTILE YARNS - TRANSFER CONES. HALF ANGLE OF THE CONE 4o 20
BIS IS 800 : 2007 AMD 1 2012	GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE
BS EN 61274-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
BS ISO 5692-2 : 2002	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS ON TOWED VEHICLES - PART 2: COUPLING RING 40 WITH SOCKET
BS 4500-4(1985) : 1985	ISO LIMITS AND FITS - SPECIFICATION FOR SYSTEM OF CONE (TAPER) FITS FOR CONES FROM C=1:3 TO 1:500, LENGTHS FROM 6 MM TO 630 MM AND DIAMETERS UP TO 500 MM
BS ISO 7789 : 2007	HYDRAULIC FLUID POWER - TWO-, THREE- AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES
BS ISO 20054 : 2016	PLAIN BEARINGS - BEARINGS CONTAINING DISPERSED SOLID LUBRICANTS
02/706400 DC : DRAFT MAY 2002	BS ISO 4156-1 - STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 1: GENERALITIES
BS ISO 1132-1 : 2000	ROLLING BEARINGS - TOLERANCES - PART 1: TERMS AND DEFINITIONS
BS 4480-3(1979) : 1979	PLAIN BEARINGS: METRIC SERIES - DIMENSIONS AND TOLERANCES OF SOLID COPPER ALLOY BUSHES
BS EN 6072 : 2010	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING
DIN EN ISO 1938-1 E : 2016	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 19381:2015)
BS ISO 29262 : 2011	PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN END EFFECTOR AND HANDLING SYSTEM
BS EN ISO 148-1 : 2016	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016)
09/30203522 DC : 0	BS ISO 1174-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
04/104967 DC : DRAFT APR 2004	ISO/DIS 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
BS 6404-8.10(1995) : 1995	MAGNETIC MATERIALS - INDIVIDUAL MATERIALS - SPECIFICATION FOR MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS
DIN EN ISO 1938-2 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
DIN EN ISO 14638 : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
BS ISO 16143-2 : 2014	STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: CORROSION-RESISTANT SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS
UNI CEN ISO/TS 8062-2 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
BS ISO/TR 10064-4 : 1998	CODE OF INSPECTION PRACTICE - PART 4: RECOMMENDATIONS RELATIVE TO SURFACE TEXTURE AND TOOTH CONTACT PATTERN CHECKING
14/30257552 DC : 0	BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES
DIN EN ISO 17450-2 E : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
ISO TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
NBR ISO 5692-2 : 2018	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS ON TOWED VEHICLES - PART 2: COUPLING RING 40 WITH SOCKET
BIS IS/IEC 60320-1 : 2001	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
BS EN 61314-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
BS EN 20898-6 : 1992	MECHANICAL PROPERTIES OF FASTENERS - NUTS WITH SPECIFIED PROOF LOAD VALUES. FINE PITCH THREAD
08/30191292 DC : DRAFT OCT 2008	BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
I.S. EN 15566:2016	RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
DIN ISO 22917 E : 2017	PRECISION SUPERABRASIVES - LIMIT DEVIATIONS AND RUNOUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE (ISO 22917:2016)
DIN CEN ISO/TS 8062-2 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
DIN ISO 3547-5 : 2015	PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER (ISO 3547-5:2007)
16/30290140 DC : 0	BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
ASME B5.1M : 1985	T-SLOTS, THEIR BOLTS, NUTS, AND TONGUES
BS EN 10088-5 : 2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
ISO 3765:1998(R2016)	TIMEKEEPING INSTRUMENTS - WRISTWATCHES - DIMENSIONS OF BRACELET-TO-CASE FASTENING ELEMENTS
12/30250149 DC : 0	BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS
BS ISO 8015 : 1985	TECHNICAL DRAWINGS - FUNDAMENTAL TOLERANCING PRINCIPLE
I.S. EN ISO 1938-2:2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
05/30138267 DC : DRAFT AUG 2005	EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
15/30321493 DC : 0	BS ISO 129-1 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
13/30286407 DC : 0	BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
BS ISO 11922-2 : 1997	THERMOPLASTICS PIPES FOR THE TRANSPORT OF FLUIDS - DIMENSIONS AND TOLERANCES - INCH-BASED SERIES
ISO 7789 : 2007(R2016)	HYDRAULIC FLUID POWER - TWO-, THREE- AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES
13/30263803 DC : 0	BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING
03/109881 DC : DRAFT JULY 2003	ISO 15242-2 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND CYLINDRICAL OUTSIDE SURFACE
BS ISO 3548-2 : 2009	PLAIN BEARINGS - THIN-WALLED HALF BEARINGS WITH OR WITHOUT FLANGE - PART 2: MEASUREMENT OF WALL THICKNESS AND FLANGE THICKNESS
BS EN ISO 14405-1 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2016)
VDI/VDE/DGQ 2618-4-4 : 2009	INSPECTION OF MEASURING AND TEST EQUIPMENT - TEST INSTRUCTION FOR REFERENCE GAUGES WITH PLANE-PARALLEL OR SPHERICAL MEASURING FACES AND FOR SPHERICAL-END GAUGES AND INTERNAL CALLIPERS
11/30237803 DC : 0	BS ISO 7790 - HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS
DIN EN ISO 14405-1 E : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2016)
14/30280974 DC : 0	BS EN ISO 4759-3 - TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F
11/30196431 DC : 0	BS ISO 13074 - ANALOGUE QUARTZ CLOCKS - FITTING DIMENSIONS OF MOVEMENTS TO HANDS
ISO TS 17450-2 : 2002	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES
ISO 10552 : 2014	TIMEKEEPING INSTRUMENTS - CROWNS AND SEALED TUBES - DESIGNS AND DIMENSIONS
08/30180235 DC : DRAFT MAR 2008	BS ISO 5408 - SCREW THREADS - VOCABULARY
BS EN 61020-1 : 2009	ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS ISO 19259 : 2015	PLAIN BEARINGS - BEARINGS WITH EMBEDDED SOLID LUBRICANTS
ISO 29262 : 2011(R2016)	PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN END EFFECTOR AND HANDLING SYSTEM
BS ISO 8434-6 : 2009	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
05/30107533 DC : DRAFT JUL 2005	ISO 10303-224 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224: APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES
BS EN 13236 : 2010	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
UNE ISO 6489-5 : 2016	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS
UNI EN 10088-5 : 2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
DIN ISO 7465 E : 2003	PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
14/30304019 DC : 0	BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
BS EN 60852-4 : 1997	OUTLINE DIMENSIONS OF TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - PART 4: TRANSFORMERS AND INDUCTORS USING YUI-2 LAMINATIONS
07/30164787 DC : 0	EN 62134-1 - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
BS 4687(1984) : 1984	SPECIFICATION FOR EXTENDED PITCH PRECISION ROLLER CHAINS AND CHAINWHEELS
DIN ISO 3408-1 E : 2011	BALL SCREWS - PART 1: VOCABULARY AND DESIGNATION
96/704404 DC : 0	ISO/DIS 9121 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - INTERNAL MICROMETERS WITH TWO-POINT CONTACT - DESIGN AND METROLOGICAL REQUIREMENTS
99/710247 DC : DRAFT JUN 1999	PREN 2003-2 - AEROSPACE SERIES - STEELS - TEST METHODS - PART 2: IZOD IMPACT TEST
BS ISO 6621-1 : 2007	INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY
BS EN 61243-1 : 2005	LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
10/30234330 DC : DRAFT DEC 2010	BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
BS PD CEN ISO/TS 8062-2 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
BS 4500-1.2(1990) : AMD 7631	ISO LIMITS AND FITS - GENERAL, TOLERANCES AND DEVIATIONS - TABLES OF COMMONLY USED TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
BS EN ISO 17450-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES
ISO 16287 : 2005(R2014)	PLAIN BEARINGS - THERMOPLASTIC BUSHES - DIMENSIONS AND TOLERANCES
BS ISO 14368-1 : 2000	MINERAL AND SAPPHIRE WATCH-GLASSES - PART 1: DIMENSIONS AND TOLERANCES
DIN EN ISO 148-1 : 2015	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016)
NBR 15934 : 2015 AMD 1 2017	COMPRESSION-IGNITION INTERNAL COMBUSTION ENGINES ALUMINUM LOW-ALLOY PISTONS
CEI EN 62074-1 : 2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
BS EN 60603-1 : 2000	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1 - GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATION, WITH ASSESSED QUALITY
06/30145675 DC : DRAFT SEP 2006	ISO 12301 - PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS
UNE EN 61020-1 : 2011	ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
11/30231340 DC : 0	BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE
BS ISO 3408-1 : 2006	BALL SCREWS - PART 1: VOCABULARY AND DESIGNATION
PREN 10088-3 : DRAFT 2011	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
10/30218225 DC : 0	BS EN 60874-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
DD ISO/TS 3669-2 : 2007	VACUUM TECHNOLOGY - BAKABLE FLANGES - PART 2: DIMENSIONS OF KNIFE-EDGE FLANGES
NBR ISO 1174-2 : 2011	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 2: DRIVING SQUARES FOR POWER SOCKET TOOLS
FORD WM 910 : 0	PERFORMANCE REQUIREMENTS FOR BODY PLUGS
BS EN ISO 1938-1 : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE
DIN EN 50347 : 2003	GENERAL PURPOSE THREE-PHASE INDUCTION MOTORS HAVING STANDARD DIMENSIONS AND OUTPUTS - FRAME NUMBERS 56 TO 315 AND FLANGE NUMBERS 65 TO 740
BS ISO 14856 : 2001	TIMEKEEPING INSTRUMENTS - WRISTWATCH CASES - FIXING DIMENSIONS OF NON-SPRING-BAR TYPES
07/30164411 DC : 0	EN 61314-1 - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
06/30044269 DC : DRAFT MAR 2006	BS 8887-1 - DESIGN OUTPUT FOR MANUFACTURE, ASSEMBLY, DISASSEMBLY AND END-OF-LIFE PROCESSING (MADE) - PREPARATION, CONTENT AND STRUCTURE - PART 1: GENERAL CONCEPTS AND REQUIREMENTS
04/30077768 DC : DRAFT FEB 2004	ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
UNE ISO 6489-2 : 2010	VEHICULOS AGRICOLAS - UNIONES MECANICAS EN VEHICULOS REMOLCADOS - PARTE 2: ANILLO DE ENGANCHE DE 40 MM CON CASQUILLO
BS EN 62496-1 : 2009	OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
BS 1916-3(2009) : 2009	LIMITS AND FITS FOR ENGINEERING - PART 3: GUIDE TO TOLERANCES, LIMITS AND FITS FOR LARGE DIAMETERS
BS EN 61169-1 : 2013	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
14/30297431 DC : 0	BS EN 60875-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
04/30126747 DC : DRAFT DEC 2004	IEC 60874-1 ED.5 - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
DIN EN ISO 8062-3 : 2008	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
13/30292791 DC : 0	BS EN ISO 14405-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES
08/30173839 DC : 0	BS ISO 3548-2 - PLAIN BEARINGS - THIN-WALLED HALF BEARINGS WITH OR WITHOUT FLANGE - PART 2: MEASUREMENT OF WALL THICKNESS AND FLANGE THICKNESS
VDI 3405 Blatt 2 : 2013	Additive manufacturing processes, rapid manufacturing- Beam melting of metallic parts- Qualification, quality assurance and post processing
14/30299349 DC : 0	BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES
DIN EN ISO 17450-2 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
DIN EN ISO 148-1 E : 2017	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016)
IEC 63032 : 1ED 2018	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC TUNEABLE BANDPASS FILTERS - GENERIC SPECIFICATION
BS ISO 16873 : 2011	HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES
12/30258651 DC : 0	BS ISO 492 - ROLLING BEARINGS - RADIAL BEARINGS - DIMENSIONAL AND GEOMETRICAL TOLERANCES
ISO 22917 : 2016	PRECISION SUPERABRASIVES - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE
API 611 REDLINE : 2008	GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
BS EN 61073-1 : 2009	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
10/30218213 DC : 0	BS EN 61274-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
BS EN ISO 14638 : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL
BS ISO 8135 : 1999	HYDRAULIC FLUID POWER - SINGLE ROD CYLINDERS, 16 MPA (160 BAR) MEDIUM AND 25 MPA (250 BAR) SERIES - TOLERANCES
CEI EN 61274-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
BS 5681(1979) : 1979	SPECIFICATION FOR TAPER PINS UNHARDENED METRIC SERIES
07/30162389 DC : 0	BS EN 62496-1 - OPTICAL CIRCUIT BOARDS - PART 1: GENERAL STANDARD
UNI EN ISO 286-2 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
CEI EN 62099 : 2002	FIBRE OPTIC WAVELENGTH SWITCHES - GENERIC SPECIFICATION
BS ISO 7790 : 2013	HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS
EN 61202-1 : 2017	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION (IEC 61202-1:2016)
BS 6101-3(1992) : 1992	MACHINE TOOL BALL SCREWS - GLOSSARY OF TERMS
08/30191273 DC : DRAFT OCT 2008	BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION
BS ISO 4156-1 : 2005	STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 1: GENERALITIES
DIN EN ISO 14638 E : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
BS ISO 6263 : 2013	HYDRAULIC FLUID POWER - COMPENSATED FLOW-CONTROL VALVES - MOUNTING SURFACES
BS ISO 3764 : 2016	TIMEKEEPING INSTRUMENTS - MOVEMENTS - TYPES, DIMENSIONS AND NOMENCLATURE
13/30288572 DC : 0	BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES
I.S. EN 60869-1:2013	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION (IEC 60869-1:2012 (EQV))
BIS IS 1757-1 : 2014	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD
08/30169101 DC : 0	BS EN 61978-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
BS ISO 3601-2 : 2016	FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSION FOR GENERAL APPLICATIONS
UNE EN ISO 148-1 : 2017	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016)
ISO 12301 : 2007(R2013)	PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS
13/30271610 DC : 0	BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS
03/116547 DC : DRAFT NOV 2003	EN ISO 15848-1 - INDUSTRIAL VALVES - FUGITIVE EMISSIONS - MEASUREMENT TEST AND QUALIFICATION PROCEDURES - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TEST OF VALVE ASSEMBLIES
08/30161340 DC : DRAFT FEB 2008	BS EN 60404-8-10 - MAGNETIC MATERIALS - PART 8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SECTION 10: SPECIFICATIONS FOR MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS
14/30294680 DC : 0	BS ISO 19259 - PLAIN BEARINGS - BEARINGS WITH EMBEDDED SOLID LUBRICANT
BS 6186-1:ADD1(1993) : 1993	SPECIFICATION FOR STRAIGHT CYLINDRICAL INVOLUTE SPLINES: METRIC MODULE, SIDE FIT - INSPECTION
92/76647 DC : DRAFT MAY 1992	PREN 2004-4 - AEROSPACE SERIES - TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS - PART 4: STRESS CORROSION TEST BY ALTERNATE IMMERSION FOR HIGH STRENGTH ALUMINIUM ALLOY WROUGHT PRODUCTS
NF EN ISO 286-2 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
BIS IS 6353 : 2014	END MILLS WITH PARALLEL SHANK - SPECIFICATION
17/30315891 DC : 0	BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS
06/30146724 DC : 0	EN 10277-1 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
BS ISO 10552 : 2014	TIMEKEEPING INSTRUMENTS - CROWNS AND SEALED TUBES - DESIGNS AND DIMENSIONS
BS EN 61978-1 : 2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
CEI EN 60876-1 : 2015	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
16/30323124 DC : 0	BS ISO 20054 - PLAIN BEARINGS - BEARINGS CONTAINING DISPERSED SOLID LUBRICANTS
BS 5983-5(1982) : 1982	METRIC SPHERICAL PLAIN BEARINGS - SPECIFICATION FOR DIMENSIONS AND TOLERANCES OF SPHERICAL PLAIN BEARING ROD ENDS DIMENSION SERIES E AND JK
01/715452 DC : DRAFT NOV 2001	PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
10/30200334 DC : 0	BS ISO 129-1 - TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
I.S. EN 6072:2010	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING
BS ISO 13942 : 2000	BONDED ABRASIVE PRODUCTS - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES
12/30259951 DC : 0	BS EN 62074-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
BS PD ISO/TR 17209 : 2013	HYDRAULIC FLUID POWER - TWO-, THREE-AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH ISO 725 (UN AND UNF) THREADS
DIN EN ISO 1179-2 E : 2014	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013)
CEI EN 61202-1 : 2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
17/30359229 DC : DRAFT SEP 2017	BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
11/30254168 DC : 0	BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN ISO 22917 : 2005	PRECISION SUPERABRASIVES - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE (ISO 22917:2016)
DD ISO/TS 17450-2 : 2002	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES
DIN EN ISO 1179-2 : 2014	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013)
12/30242874 DC : 0	BS ISO 1206:2001/AMD 1 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DIMENSION SERIES 48, 49 AND 69 - BOUNDARY DIMENSIONS AND TOLERANCES
DIN 69051-3 : 1989-05	MACHINE TOOLS - BALL SCREWS - ACCEPTANCE CONDITIONS AND ACCEPTANCE TESTS
BS ISO 16287 : 2005	PLAIN BEARINGS - THERMOPLASTIC BUSHES - DIMENSIONS AND TOLERANCES
I.S. EN 60874-1:2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV))
UNI EN ISO 8062-3 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
BS ISO 14368-3 : 2003	MINERAL AND SAPPHIRE WATCH-GLASSES - PART 3: QUALITATIVE CRITERIA AND TEST METHODS
NF ISO 8015 : 2006	TECHNICAL DRAWINGS - FUNDAMENTAL TOLERANCING PRINCIPLE
I.S. EN ISO 14405-1:2016	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO/DIS 14405-1:2013)
00/715331 DC : 0	ISO/CD 8434-6 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
10/30234327 DC : DRAFT DEC 2010	BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS
12/30262686 DC : 0	BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
DIN ISO 8489-4 E : 1997	TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 4: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE 4 DEGREES 20 MINUTES FOR WINDING FOR DYEING PURPOSES
NBR ISO 148-1 : 2013	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD
10/30234324 DC : DRAFT DEC 2010	BS EN 12561-4 - RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS
ISO 19259 : 2015	PLAIN BEARINGS - BEARINGS WITH EMBEDDED SOLID LUBRICANTS
04/30125936 DC : DRAFT NOV 2004	ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS
13/30241415 DC : 0	BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
DIN EN 10088-5 : 2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
17/30332783 DC : 0	BS ISO 5145 - GAS CYLINDERS - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING
BS EN 60320-3 : 2014	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES
06/30154588 DC : DRAFT AUG 2006	ISO 6621-1 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY
BS ISO 6264 : 1998	HYDRAULIC FLUID POWER - PRESSURE-RELIEF VALVES - MOUNTING SURFACES
BS EN 62496-4 : 2011	OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE
12/30249003 DC : 0	BS ISO 3764 - TIMEKEEPING INSTRUMENTS - MOVEMENTS - TYPES, DIMENSIONS AND NOMENCLATURE
09/30198179 DC : 0	BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES
ISO 4639-3 : 1995	RUBBER TUBING AND HOSES FOR FUEL CIRCUITS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION - PART 3: OXIDIZED FUELS
BS ISO 10303-47 : 1997	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - INTEGRATED GENERIC RESOURCE: SHAPE VARIATION TOLERANCES
BS EN ISO 1179-2 : 2013	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
09/30192800 DC : 0	BS ISO 29262 - PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN GRIPPERS AND HANDLING SYSTEM
BS EN 60869-1 : 2013	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE POWER CONTROL - PART 1: GENERIC SPECIFICATION
ISO 6621-1 : 2018	INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY
DIN 406-10 E : 1992	ENGINEERING DRAWING PRACTICE - DIMENSIONING - CONCEPTS AND GENERAL PRINCIPLES
DIN 28006-1 : 2009	TOLERANCES AND LIMIT DEVIATIONS FOR AGITATOR VESSELS - PART 1: AGITATOR VESSELS OF METALLIC MATERIALS
DIN ISO 3547-5 E : 2015	PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER (ISO 3547-5:2007)
BS ISO 1174-1 : 2011	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
03/317167 DC : DRAFT OCT 2003	ISO 16287 - PLAIN BEARINGS - THERMOPLASTIC BUSHES - DIMENSIONS AND TOLERANCES
BS EN ISO 17296-3 : 2016	ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014)
BS 4215-4(1990) : 1990	RESISTANCE SPOT WELDING ELECTRODES, ELECTRODE HOLDERS AND ANCILLARY EQUIPMENT - SPECIFICATION FOR TAPER PLUG GAUGES AND TAPER RING GAUGES
16/30338711 DC : 0	BS IEC 60404-8-6 ED 3.0 - MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS
10/30234803 DC : 0	BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
07/30168153 DC : 0	BS EN 60875-1 - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
UNI ISO 8434-6 : 2012	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
10/30218221 DC : 0	BS EN 61314-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
BS EN 3238 : 2010	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
15/30314221 DC : 0	BS ISO 22917 - SUPERABRASIVES - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE
13/30288636 DC : 0	BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
IEC 60852-3 : 1.0	OUTLINE DIMENSIONS OF TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - TRANSFORMERS AND INDUCTORS USING YUI-1 LAMINATIONS
14/30304198 DC : 0	BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
BS 8887-1(2006) : 2006	DESIGN FOR MANUFACTURE, ASSEMBLY, DISASSEMBLY AND END-OF-LIFE PROCESSING (MADE) - PART 1: GENERAL CONCEPTS, PROCESS AND REQUIREMENTS
BS 341-3(2002) : 2002	TRANSPORTABLE GAS CONTAINER VALVES - VALVE OUTLET CONNECTIONS
I.S. EN 61314-1:2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION (IEC 61314-1:2011 (EQV))
05/30127444 DC : DRAFT JAN 2005	ISO 10303-238 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 238: APPLICATION PROTOCOL - APPLICATION INTERPRETED MODEL FOR COMPUTERIZED NUMERIC CONTROLLERS
BS EN ISO 8062-3 : 2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
I.S. EN ISO 14638:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
DIN EN 20898-6 : 1992	MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
BS EN 50033 : 1991	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLAMPS FOR MINES SUSCEPTIBLE TO FIREDAMP
08/30184283 DC : DRAFT SEP 2008	BS EN 12561-4 - RAILWAY APPLICATIONS - TANK WAGONS - PART 4: TOP DEVICES FOR TOP EMPTYING AND FILLING OF LIQUID PRODUCTS
03/106013 DC : DRAFT MAR 2003	ISO 22917 - SUPERABRASIVES - LIMIT DEVIATIONS AND RUN OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE
NBR ISO 3467 : 2010	MACHINE TAPER PIN REAMERS WITH MORSE TAPER SHANKS
08/30184289 DC : DRAFT SEP 2008	BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
12/30274628 DC : 0	BS EN 60320-3 - APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES
13/30274174 DC : 0	BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES
BS EN 61977 : 2015	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION
BS ISO TR 10064-3 : 1996	CODE OF INSPECTION PRACTICE - PART 3: RECOMMENDATIONS RELATIVE TO GEAR BLANKS, SHAFT CENTRE DISTANCE AND PARALLELISM OF AXES
07/30172547 DC : 0	BS EN 62074-1 - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
07/30168042 DC : 0	BS ISO 26622-1 - MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS
10/30234321 DC : DRAFT DEC 2010	BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
ASME B5.1M : 1985 : R2014	T-SLOTS, THEIR BOLTS, NUTS, AND TONGUES
BS ISO 492 : 2014	ROLLING BEARINGS - RADIAL BEARINGS - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
03/313750 DC : DRAFT AUG 2003	BS ISO 148-1 - METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD
DIN EN ISO 286-2 E : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
ISO 4639-2 : 1995	RUBBER TUBING AND HOSES FOR FUEL CIRCUITS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION - PART 2: OXYGENATED FUELS
08/30189270 DC : 0	BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
BS EN ISO 286-2 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
08/30180281 DC : DRAFT JUNE 2008	BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
08/30184286 DC : DRAFT SEP 2008	BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: TOP DEVICES FOR BOTTOM EMPTYING AND TOP FILLING OF LIQUID PRODUCTS
00/706500 DC : DRAFT MAR 2000	ISO/DIS 5692-2 - AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS ON TOWED VEHICLES - PART 2: COUPLING RING 40 WITH SOCKET
CEI EN 61073-1 : 2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
ASME B32.100 : 2016	PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS
BS ISO 5408 : 2009	SCREW THREADS - VOCABULARY
BS ISO 5145 : 2017	GAS CYLINDERS - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING
I.S. EN ISO 17450-2:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
08/30174605 DC : DRAFT SEP 2008	BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
BS QC010000(1993) : AMD 10432	HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. CONNECTORS FOR FREQUENCIES BELOW 3 MHz FOR USE WITH PRINTED BOARDS - GENERIC SPECIFICATION: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY
UNE-EN ISO 17450-2:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
91/78933 DC : DRAFT AUG 1991	ISO/DIS 1938-3 - INSPECTION OF PLAIN WORKPIECES - PART 3: GUIDELINES FOR INSPECTION USING WORKSHOP MEASURING INSTRUMENTS
04/30125584 DC : DRAFT NOV 2004	IEC 61274-1 ED 2 - ADAPTORS FOR OPTICAL FIBRES AND CABLES - PART 2: GENERIC SPECIFICATION
BS ISO 199 : 2014	ROLLING BEARINGS - THRUST BEARINGS - GEOMETRICAL PRODUCT SPECIFICATION (GPS) AND TOLERANCE VALUES
BS ISO 4401 : 2005	HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
BS 1836-1(1982) : 1982	FLYER BOBBINS - SPECIFICATION FOR DIMENSIONS OF PLASTICS FLYER BOBBINS FOR SPEED FRAMES
BS ISO 3245 : 2015	ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH DRAWN CUP AND WITHOUT INNER RING - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
API 611 : 2008 : R2014	GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
BS ISO 6489-2 : 2002	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - SPECIFICATIONS FOR CLEVIS COUPLING 40
I.S. EN 60404-8-6:2017	MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS
08/30174656 DC : DRAFT SEP 2008	BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
08/30184522 DC : DRAFT JUNE 2008	BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS
BS ISO 6195 : 2013	FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER-ROD WIPER-RING HOUSINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
BS EN 60404-8-6 : 2017	MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS (IEC 60404-8-6:2016)
API 611:2008	GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
12/30235512 DC : 0	BS ISO 5145 - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING
09/30206090 DC : 0	BS EN 62496-4 - OPTICAL CIRCUIT BOARDS - INTERFACE STANDARDS - PART 4: GENERAL AND GUIDANCE
BS EN 61269-1 : 1997	FIBRE OPTIC TERMINUS SETS - PART 1: GENERIC SPECIFICATION
I.S. EN ISO 148-1:2016	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016)
CEI EN 61314-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
BS ISO 4156-3 : 2005	STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION
04/30112654 DC : 0	IEC 60740-1 ED.1 - LAMINATIONS FOR TRANSFORMERS AND INDUCTORS - PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS
BS EN 62099 : 2001	FIBRE OPTIC WAVELENGTH SWITCHES - GENERIC SPECIFICATION
BS 2000-49(2015) : 2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
07/30167285 DC : 0	BS EN 60869-1 - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION
BS EN 175500 : 1997	HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - SECTIONAL SPECIFICATION - CABLE OUTLET ACCESSORIES FOR CONNECTORS, INCLUDING QUALIFICATION APPROVAL AND CAPABILITY APPROVAL
93/710118 DC : 0	PREN 3238 - AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS EXCEPT ALUMINIUM AND ALUMINIUM ALLOYS - SHEAR TEST FOR WIRES AND RIVETS
08/30184169 DC : DRAFT JUNE 2008	BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
NBR 16080 : 2013	INTERNAL COMBUSTION ENGINES - CYLINDER LINERS ASSEMBLED IN THE BLOCK WITH OR WITHOUT CONTACT WITH THE COOLANT (WET AND DRY TYPE RESPECTIVELY)
07/30171301 DC : 0	BS EN 3238 - AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
ISO 6489-5 : 2011(R2016)	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS
BS EN 62077 : 2016	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
BS EN 60874-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
BS 228(1984) : 1984	SPECIFICATION FOR SHORT PITCH TRANSMISSION PRECISION ROLLER CHAINS AND CHAINWHEELS
PREN 2003-2 : 200P1	AEROSPACE SERIES - STEELS - TEST METHODS - PART 2: IZOD IMPACT TEST
DIN ISO 8489-3 E : 1997	TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 3: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE OF 4 DEGREES 20 MINUTES
UNI ISO 1174-1 : 2012	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
ABMA ISO 10285 : 2009	ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES
DIN 406-12 E : 1992	ENGINEERING DRAWING PRACTICE - DIMENSIONING - TOLERANCING OF LINEAR AND ANGULAR DIMENSIONS
ISO 13942 : 2000(R2014)	BONDED ABRASIVE PRODUCTS - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES
ABMA ISO 10285 : 2009 : R2015	ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES
BIS IS 6352 : 2014	SLOT DRILLS WITH PARALLEL SHANK - SPECIFICATION
ISO 20054 : 2016	PLAIN BEARINGS - BEARINGS CONTAINING DISPERSED SOLID LUBRICANTS
CEI EN 62496-4 : 2012	OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE
DIN EN ISO 14405-2 E : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
DIN ISO 10285 : 2009	ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES
DIN SPEC 91184 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
DIN 406-10 : 1992-12	TECHNICAL DRAWINGS; DIMENSIONING; DEFINITIONS, GENERAL PRINCIPLES
NFPA T3.5.50 : 2009	HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS
DIN ISO 3408-1 : 2011	BALL SCREWS - PART 1: VOCABULARY AND DESIGNATION
ASME B5.1M : 1985 : R2004	T-SLOTS, THEIR BOLTS, NUTS, AND TONGUES
I.S. EN 61797-1:1998	TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - MAIN DIMENSIONS OF COIL FORMERS - PART 1: COIL FORMERS FOR LAMINATED CORES
ISO 6489-2 : 2002(R2015)	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 2: SPECIFICATIONS FOR CLEVIS COUPLING 40
ISO 13074 : 2012(R2018)	ANALOGUE QUARTZ CLOCKS - FITTING DIMENSIONS OF MOVEMENTS TO HANDS
17/30346164 DC : 0	BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
UNE ISO 3408-1 : 2011	BALL SCREWS - PART 1: VOCABULARY AND DESIGNATION
NF EN 61202-1 : 2009	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
IEEE C37.100.1 : 2007	COMMON REQUIREMENTS FOR HIGH VOLTAGE POWER SWITCHGEAR RATED ABOVE 1000 V
BS ISO 4639-3 : 1995	RUBBER TUBING AND HOSES FOR FUEL CIRCUITS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION
PREN 3238 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
PREN 6072 : 200P2	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING
I.S. EN 62074-1:2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
IEEE DRAFT C37.100.1 : D9 2007	COMMON REQUIREMENTS FOR HIGH VOLTAGE POWER SWITCHGEAR RATED ABOVE 1000 V
NBR ISO 6621-1 : 2009	INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY
ISO 3466 : 2016	MACHINE TAPER PIN REAMERS WITH PARALLEL SHANKS
ASME B5.1M : 1985 : R2009	T-SLOTS, THEIR BOLTS, NUTS, AND TONGUES
API 546 : 2008	BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
SAE J 1946 : 2007(S2016)	COMPANION FLANGES, TYPE A (EXTERNAL PILOT) AND TYPE S (INTERNAL PILOT)
CEI EN 61076-1 : 2007	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
I.S. EN 3238:2010	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
API 541 : 2014	FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
API 611:2008	GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
DD ISO/TS 13399-50 : 2007	CUTTING TOOL DATA REPRESENTATION AND EXCHANGE - PART 50: REFERENCE DICTIONARY FOR REFERENCE SYSTEMS AND COMMON CONCEPTS
BS ISO 1206 : 2001	ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DIMENSION SERIES 48, 49 AND 69 -BOUNDARY DIMENSIONS AND TOLERANCES
ISO 4156-1 : 2005(R2015)	STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 1: GENERALITIES
BS EN 61243-3 : 2014	LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
I.S. EN 61269-1:1999	FIBRE OPTIC TERMINUS SETS - PART 1: GENERIC SPECIFICATION
IEC 61243-1 : 2.1	LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
NBR 9518 : 1997	EQUIPAMENTOS ELETRICOS PARA ATMOSFERAS EXPLOSIVAS - REQUISITOS GERAIS
I.S. EN 62134-1:2009	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
EN 62077 : 2016	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION (IEC 62077:2015)
I.S. EN ISO 1938-1:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015)
I.S. EN 60876-1:2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
I.S. 231:1979	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
I.S. EN 50033:1992	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP
NBR 15545 : 2007	SAFETY REQUIREMENTS FOR SUPERABRASIVES
SR CEN ISO/TS 8062-2:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
NF EN 62077 : 2011	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
UNI EN ISO 14405-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
I.S. EN 60875-1:2015	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
BS EN ISO 14405-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
I.S. EN 60740-1:2005	LAMINATIONS FOR TRANSFORMERS AND INDUCTORS - PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS
I.S. EN 61977:2015	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION
I.S. EN 62077:2016	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
I.S. CWA 14949:2004	FUNSTEP AP-APPLICATION INTERPRETED MODEL, INCLUDING VALIDATION GUIDELINES
UNE EN ISO 286-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010/COR 1:2013)
I.S. EN ISO 14405-2:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
BS 2000-49(2000) : 2000	METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
CEI EN 62134-1 : 2011	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
UNE ISO 5692-2 : 2010	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS ON TOWED VEHICLES - PART 2: COUPLING RING 40 WITH SOCKET
I.S. EN 61274-1:2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV))
I.S. EN 60320-3:2014	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES
I.S. EN 50109-2-4:1997	HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR CENTRE CONTACTS OF RF CONNECTORS, SERIES SMZ
ISO 5252 : 1991(R2018)	STEEL TUBES - TOLERANCE SYSTEMS
DIN ISO 10285 E : 2009	ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES
DIN EN ISO 8434-1 : 2016	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 8434-1 : 2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 2795 : 2014	PLAIN BEARINGS - SINTERED BUSHES - DIMENSIONS AND TOLERANCES
I.S. EN 61978-1:2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
ISO 1174-1 : 2011(R2016)	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
I.S. EN 62496-4:2011	OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE
PREN 10272 : DRAFT 2013	STAINLESS STEEL BARS FOR PRESSURE PURPOSES
ISO 10285 : 2007(R2018)	ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES
NBR ISO 3466 : 2010	MACHINE TAPER PIN REAMERS WITH PARALLEL SHANKS
CEI EN 50033 : 1998	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLAMPS FOR MINES SUSCEPTIBLE TO FIREDAMP
ISO 14649-10 : 2004(R2019)	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PHYSICAL DEVICE CONTROL - DATA MODEL FOR COMPUTERIZED NUMERICAL CONTROLLERS - PART 10: GENERAL PROCESS DATA
UNI EN 3238 : 2011	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
ISO 3245 : 2015	ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH DRAWN CUP AND WITHOUT INNER RING - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
ISO 6195 : 2013	FLUID POWER SYSTEMS AND COMPONENTS - CYLINDER-ROD WIPER-RING HOUSINGS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
ISO 3548-2 : 2009	PLAIN BEARINGS - THIN-WALLED HALF BEARINGS WITH OR WITHOUT FLANGE - PART 2: MEASUREMENT OF WALL THICKNESS AND FLANGE THICKNESS
UNE-EN ISO 14405-1:2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2010)
ISO TS 23768-1 : 2011	ROLLING BEARINGS - PARTS LIBRARY - PART 1: REFERENCE DICTIONARY FOR ROLLING BEARINGS
BS 4480-9(1995) : 1995	PLAIN BEARINGS - METRIC SERIES - CHECKING THE OUTSIDE DIAMETER OF WRAPPED BUSHES
NBR ISO 3465 : 2010	HAND TAPER PIN REAMERS
NFPA T3.5.50 : 2009 : R2014	HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS
NFPA T3.5.50 : 2009	HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS
BS ISO 6489-5 : 2011	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS
ISO 12307-1 : 1994	PLAIN BEARINGS WRAPPED BUSHES - CHECKING THE OUTSIDE DIAMETER
ISO 199 : 2014	ROLLING BEARINGS - THRUST BEARINGS - GEOMETRICAL PRODUCT SPECIFICATION (GPS) AND TOLERANCE VALUES
DIN EN ISO 286-2 : 2010-11	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
I.S. EN 61076-1:2006&A1:2019	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
ISO 5408 : 2009(R2014)	SCREW THREADS - VOCABULARY
ISO 129-1 : 2018	TECHNICAL PRODUCT DOCUMENTATION (TPD) - PRESENTATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
DIN EN 13236 : 2016	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
XP ISO/TS 23768-1 : 2012 XP	ROLLING BEARINGS - PARTS LIBRARY - PART 1: REFERENCE DICTIONARY FOR ROLLING BEARINGS
DIN EN ISO 8434-1 E : 2008	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN ISO 14405-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
UNI ISO 7465 : 2010	PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
DIN EN ISO 14405-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
BS 2000-49(2007) : 2007	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
BS EN 61076-1 : 2006	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
UNI EN ISO 1179-2 : 2013	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
NF EN ISO 14405-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
NF EN 10088-5 : 2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
NF ISO 5408 : 2009	SCREW THREADS - VOCABULARY
UNI ISO 129-1 : 2011	TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
OVE/ONORM EN 62077 : 2011	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
I.S. EN 61243-3:2014	LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
DIN EN 13236 E : 2016	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
UNI EN ISO 8434-1 : 2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
PREN 15566 : DRAFT 2013	RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
BS EN 60875-1 : 2015	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
NF ISO 1174-1 : 2011	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
BS ISO 22917 : 2016	PRECISION SUPERABRASIVES - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE
NBR NM-281-1 : 2003	METALLIC MATERIALS - PART 1: CHARPY IMPACT TEST ON METALLIC MATERIALS - TEST METHOD
UNE EN ISO 17296-3 : 2017	ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014)
CEI EN 60874-1 : 2012	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
ISO 14405-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
ABMA ISO 199 : 2014	ROLLING BEARINGS - THRUST BEARINGS - GEOMETRICAL PRODUCT SPECIFICATION (GPS) AND TOLERANCE VALUES
IEC 60404-8-10 : 2.0	MAGNETIC MATERIALS - PART 8-10: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS
CEI EN 60603-1 : 2001	CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION; GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY
(INACTIVE RECORD)ABMA ISO 10285 : 2009	ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES
UNI EN ISO 17450-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES
PREN ISO 2692 : DRAFT 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012)
UNE EN ISO 1179-2 : 2014	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013)
NBR ISO 1174-1 : 2012	ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS
NF EN 62134-1 : 2010	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
I.S. EN 10088-5:2009	STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
UNE-EN ISO 14405-2:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
ISO 3547-5 : 2007(R2017)	PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER
I.S. EN 13236:2010	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
ISO 1206 : 2018	ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
ISO 492 : 2014	ROLLING BEARINGS - RADIAL BEARINGS - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
ISO 10303-214 : 2010	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 214: APPLICATION PROTOCOL: CORE DATA FOR AUTOMOTIVE MECHANICAL DESIGN PROCESSES
NBR 16176 : 2013	AIR COOLED CYLINDER LINERS (FINNED) FOR INTERNAL COMBUSTION ENGINES ASSEMBLED IN THE BLOCK
BS ISO 5781 : 2000	HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
DIN ISO 3601-2 E : 2010	FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSIONS FOR GENERAL APPLICATIONS
BS QC 880000-1(1995) : 1995 AMD 9689	HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - FIBRE OPTIC FAN-OUTS - GENERIC SPECIFICATION
BS ISO 10285 : 2007	ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES
BS EN 61202-1 : 2017	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
ISO 4401 : 2005(R2017)	HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
BS ISO 13074 : 2012	ANALOGUE QUARTZ CLOCKS - FITTING DIMENSIONS OF MOVEMENTS TO HANDS
BS ISO 3547-5 : 2007	PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER
BS 5983-3(1982) : 1982	METRIC SPHERICAL PLAIN BEARINGS - SPECIFICATION FOR DIMENSIONS OF SPHERICAL PLAIN RADIAL BEARINGS JOINT TYPE DIMENSION SERIAL EW BEARINGS WITH EXTENDED INNER RING
NBR 15905 : 2017	SPARK-IGNITION INTERNAL COMBUSTION ENGINES - MONOLITHIC PISTONS WITH LIGHTWEIGHT ALUMINUM ALLOY
02/614072 DC : DRAFT NOV 2002	EN ISO 9409-1 - MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES
NF EN 3238 : 2011	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS
NF ISO 6489-5 : 2011	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS
ISO 14368-2 : 2003(R2015)	MINERAL AND SAPPHIRE WATCH-GLASSES - PART 2: ASSEMBLY TO THE CASE BY ADHESIVE OR USING A GASKET
I.S. EN ISO 8062-3:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
ISO 4156-3 : 2005(R2015)	STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION
UNE EN 60320-3 : 2015	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES
DIN EN ISO 14405-1 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2016)
ISO 10303-238 : 2007(R2012)	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 238: APPLICATION PROTOCOL: APPLICATION INTERPRETED MODEL FOR COMPUTERIZED NUMERICAL CONTROLLERS
I.S. EN ISO 17296-3:2016	ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014)
DIN ISO 6284 E : 1997	CONSTRUCTION DRAWINGS - INDICATION OF LIMIT DEVIATIONS
I.S. EN ISO 286-2:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010)
DIN ISO 8489-2 E : 1997	TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 2: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH HALF ANGLE OF 3 DEGREES 30 MINUTES
DIN EN ISO 1938-2 E : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
ISO TS 3669-2 : 2007	VACUUM TECHNOLOGY - BAKABLE FLANGES - PART 2: DIMENSIONS OF KNIFE-EDGE FLANGES
ISO 6263 : 2013(R2018)	HYDRAULIC FLUID POWER - COMPENSATED FLOW-CONTROL VALVES - MOUNTING SURFACES
ISO 14368-1 : 2000(R2016)	MINERAL AND SAPPHIRE WATCH-GLASSES - PART 1: DIMENSIONS AND TOLERANCES
ISO 286-2 : 2010(R2015)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
ISO TR 10064-3 : 1996(R2012)	CODE OF INSPECTION PRACTICE - PART 3: RECOMMENDATIONS RELATIVE TO GEAR BLANKS, SHAFT CENTRE DISTANCE AND PARALLELISM OF AXES
I.S. EN 61243-1:2005	LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
ISO 16143-2 : 2014	STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: CORROSION-RESISTANT SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS
EN 13236 : 2010 + A1 2015	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
EN ISO 8434-1 : 2007 COR 2009	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 10303-219 : 2007	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 219: APPLICATION PROTOCOL: DIMENSIONAL INSPECTION INFORMATION EXCHANGE
ISO 14368-3 : 2003(R2014)	MINERAL AND SAPPHIRE WATCH-GLASSES - PART 3: QUALITATIVE CRITERIA AND TEST METHODS
ISO 8434-6 : 2009(R2015)	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
ISO/TR 17209 : 2013	HYDRAULIC FLUID POWER - TWO-, THREE- AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH ISO 725 (UN AND UNF) THREADS
I.S. EN ISO 1179-2:2013	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013)
I.S. EN 62496-1:2009	OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
IEC 60807-1 : 2.0	RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 1: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS
ISO 3601-2 : 2016	FLUID POWER SYSTEMS - O-RINGS - PART 2: HOUSING DIMENSION FOR GENERAL APPLICATIONS
ISO 10303-224 : 2006	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224 - APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES
ISO 5145 : 2017	GAS CYLINDERS - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING
ISO TR 10064-4 : 1998(R2012)	CODE OF INSPECTION PRACTICE - PART 4: RECOMMENDATIONS RELATIVE TO SURFACE TEXTURE AND TOOTH CONTACT PATTERN CHECKING
ISO 7790 : 2013(R2018)	HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS
ISO 8062 : 1994-04	CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES
I.S. EN 61020-1:2009	ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 62134-1 : 2.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION
ISO 683-15 : 1992(2018)	HEAT TREATED STEELS, ALLOY STEELS AND FREE CUTTING STEELS - VALVES STEELS FOR INTERNAL COMBUSTION ENGINES
I.S. EN 61169-1:2013	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
ISO 16873 : 2011(R2017)	HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES
I.S. EN 175500:1998	CABLE OUTLET ACCESSORIES FOR CONNECTORS, INCLUDING QUALIFICATION APPROVAL AND CAPABILITY APPROVAL (SECTIONAL SPECIFICATION)
IEC 62077 : 3.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION
IEC 61202-1 : 4.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION
I.S. CWA 14249:2003	REVISED FUNSTEP APPLICATION REFERENCE MODEL
ISO 5781 : 2016	HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES
ISO 14856 : 2001(R2017)	TIMEKEEPING INSTRUMENTS - WRISTWATCH-CASES - FIXING DIMENSIONS OF NON-SPRING-BAR TYPES
BS EN ISO 8434-1 : 2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 10303-223 : 2008	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 223: APPLICATION PROTOCOL: EXCHANGE OF DESIGN AND MANUFACTURING PRODUCT INFORMATION FOR CAST PARTS
ISO 3408-1 : 2006(R2015)	BALL SCREWS - PART 1: VOCABULARY AND DESIGNATION
EN 1426 : 2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
ISO 14679 : 1997	ADHESIVES - MEASUREMENT OF ADHESION CHARACTERISTICS BY A THREE-POINT BENDING METHOD
ISO 7465 : 2007(R2014)	PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
CEN ISO/TS 8062-2 : 2013 COR 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
EN 61169-1 : 2013 COR 2016	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
DIN EN ISO 15848-1 : 2015	INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES (ISO 15848-1:2015 + AMD.1:2017)
CSA C22.2 No. 60320-1 : 2011(2016)	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
DIN EN 1966 : 2009	STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
DIN EN 1426 : 2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
DIN EN 1966 E : 2009	STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
CSA C22.2 No. 60320	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
DIN EN 12890 : 2002-05	FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
DIN EN 10088-3 : 2014	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
CSA C22.2 No. 60320-1 : 2011 : R2016	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
DIN EN 12561-4 : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS
DIN EN 10277-1 : 2008-06	BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
DIN EN ISO 2692 E : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
DIN EN 12561-5 : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS
DIN EN ISO 9409-1 : 2004	MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES
DIN EN ISO 4759-1 E : 2001	TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C
DIN EN 12561-6 : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
DIN EN 12561-2 : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN
DIN EN ISO 9409-1 E : 1997	MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERACES - PART 1: PLATES
DIN EN 12561-3 : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
DIN EN 12561-5 E : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS
DIN EN ISO 9409-2 E : 2003	MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 2: SHAFTS
DIN EN 10272 : 2016	STAINLESS STEEL BARS FOR PRESSURE PURPOSES
DIN EN 12890 E : 2000	FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
DIN EN ISO 2692 : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
DIN EN 12561-4 E : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS
DIN EN 10088-3 E : 2014	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN ISO 293 E : 2005	PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS
DIN EN 12561-3 E : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
DIN EN 12561-2 E : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN
DIN EN 12561-6 E : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
DIN EN 1426 E : 2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
DIN EN ISO 293 : 2005	PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS
DIN EN ISO 15848-1 E : 2017	INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES (ISO 15848-1:2015 + AMD.1:2017)
BS EN ISO 9409-1 : 2004	MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES
UNE EN 12561-4 : 2012	RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS
BS EN 12561-5 : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS
UNE-EN 10272:2016	STAINLESS STEEL BARS FOR PRESSURE PURPOSES
IEC 62496-4 : 1.0	OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE
BS EN ISO 4759-1 : 2001	TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C
IEC 61073-1 : 4.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
ISO 1179-2 : 2013(R2019)	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
BS PD ISO/TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
BS EN ISO 9409-2 : 2003	MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 2: SHAFTS
BS EN 12561-3 : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
UNE EN ISO 4759-3 : 2017	TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F (ISO 4759-3:2016)
ISO 5692-2 : 2002(R2015)	AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS ON TOWED VEHICLES - PART 2: COUPLING RING 40 WITH SOCKET
UNE-EN 1426:2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
IEC 61169-1 : 2.0	RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
BS EN ISO 14660-2 : 2000	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 2: EXTRACTED MEDIAN LINE OF A CYLINDER AND A CONE, EXTRACTED MEDIAN SURFACE, LOCAL SIZE OF AN EXTRACTED FEATURE
ISO 148-1 : 2016	METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD
BS EN ISO 15245-1 : 2001	GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION
ISO 15848-1 : 2015	INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES
UNE-EN ISO 2692:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
ISO 8062-3 : 2007(R2016)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
UNE EN 12561-5 : 2012	RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS
IEC 60320-3 : 1ED 2014	APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES
BS EN ISO 4759-3 : 2000	TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F (ISO 4759-3:2016)
BS EN 10272 : 2007	STAINLESS STEEL BARS FOR PRESSURE PURPOSES
BS EN ISO 2692 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
BS EN 12561-6 : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
ISO 1938-2 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES
ISO TS 8062-2 : 2013(R2016)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
BS EN 20286-2 : 1993	ISO SYSTEM OF LIMITS AND FITS - ISO SYSTEM OF LIMITS AND FITS - TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
BS EN 10277-1 : 2008	BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
IEC 60876-1 : 5.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION
DIN EN 10277-1 E : 2008	BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL
IEC 60869-1 : 4.0	FIBRE OPTIC INTERCONECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION
IEC 61797-1 : 1.0	TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - MAIN DIMENSIONS OF COIL FORMERS - PART 1: COIL FORMERS FOR LAMINATED CORES
ISO 2692 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
ISO 128-1 : 2003(R2015)	TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 1: INTRODUCTION AND INDEX
BS EN 12561-2 : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN
BS EN ISO 15848-1 : 2015	INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES (ISO 15848-1:2015)
IEC 60874-1 : 6.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION
UNE EN 12561-2 : 2012	RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN
IEC 61314-1 : 4.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION
ISO 17450-2 : 2012(R2017)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES
IEC 60852-4 : 1.0	OUTLINE DIMENSIONS OF TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - TRANSFORMERS AND INDUCTORS USING YUI-2 LAMINATIONS
BS EN ISO 6284 : 1999	CONSTRUCTION DRAWINGS - INDICATION OF LIMIT DEVIATIONS
UNE EN 12561-3 : 2012	RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
IEC 61020-1 : 2.0	ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN 10088-3 : 2014	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
ISO 293 : 2004(R2016)	PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS
IEC 60875-1 : 6.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION
ISO 1938-1 : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE
ISO 6284 : 1996(R2018)	CONSTRUCTION DRAWINGS - INDICATION OF LIMIT DEVIATIONS
IEC 60404-8-6 : 3.0	MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS
BS EN 28167 : 1992	SPECIFICATION FOR PROJECTIONS FOR RESISTANCE WELDING
ISO 9409-2 : 2002	MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 2: SHAFTS
IEC 61274-1 : 3.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION
ISO 14660-2 : 1999	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 2: EXTRACTED MEDIAN LINE OF A CYLINDER AND A CONE, EXTRACTED MEDIAN SURFACE, LOCAL SIZE OF AN EXTRACTED FEATURE
ISO 14638 : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL
IEC 61243-3 : 3.0	LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
IEC 62496-1 : 1.0	OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
IEC 62099 : 1.0	FIBRE OPTIC WAVELENGTH SWITCHES - GENERIC SPECIFICATION
ISO 15245-1 : 2001(R2019)	GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION
BS EN ISO 14660-1 : 2000	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS
IEC 62074-1 : 2.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION
BS EN ISO 293 : 2005	PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS
BS EN 12561-4 : 2011	RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS
ISO 1132-1 : 2000(R2017)	ROLLING BEARINGS - TOLERANCES - PART 1: TERMS AND DEFINITIONS
ISO 9409-1 : 2004	MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES
BS EN 1426 : 2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
BS EN 25822 : 1992	SPOT WELDING EQUIPMENT - TAPER PLUG GAUGES AND TAPER RING GAUGES
BS EN 1966 : 2009	STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD
ISO 17296-3 : 2014	ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS
ISO 14660-1 : 1999	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS
IEC 60740-1 : 1.0	LAMINATIONS FOR TRANSFORMERS AND INDUCTORS - PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS
ISO 4759-1 : 2000(R2017)	TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C
IEC 61076-1 : 2.0	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION
ISO 4759-3 : 2016	TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F
UNE EN ISO 15848-1 : 2015	INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES (ISO 15848-1:2015/AMD 1:2017)
UNE EN 61243-3 : 2015	LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
UNE-EN 10088-3:2015	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNE EN 12561-6 : 2012	RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
IEC 61978-1 : 3.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION
ISO 14405-1 : 2016	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES
IEC 61977 : 3.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION
EN 61977 : 2015	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION (IEC 61977:2015)
UL 60320-1 : 2	APPLIANCES COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS

Standards Referencing This Book - (Show below) - (Hide below)

ISO TR 14638 : 1995	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - MASTERPLAN
ISO TS 17450-2 : 2002	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES
ISO 2692 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
ISO 4759-1 : 2000(R2017)	TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C
ISO/DIS 17450-1 : 60.00 (2011)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
ISO 1101 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT
ISO 1 : 2016	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STANDARD REFERENCE TEMPERATURE FOR THE SPECIFICATION OF GEOMETRICAL AND DIMENSIONAL PROPERTIES
ISO/DIS 14405-1 : 60.00 (2016)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES
ISO 14253-1 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS
ISO 1302 : 2002(R2012)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION
ISO 3534-2 : 2006(R2014)	STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS
ISO 14660-2 : 1999	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 2: EXTRACTED MEDIAN LINE OF A CYLINDER AND A CONE, EXTRACTED MEDIAN SURFACE, LOCAL SIZE OF AN EXTRACTED FEATURE
ISO 286-2 : 2010(R2015)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
ISO 14660-1 : 1999	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS
ISO R 1938 : 1971	ISO SYSTEM OF LIMITS AND FITS - PART 2: INSPECTION OF PLAIN WORKPIECES
ISO 3534-1 : 2006(R2010)	STATISTICS - VOCABULARY AND SYMBOLS - PART 1: GENERAL STATISTICAL TERMS AND TERMS USED IN PROBABILITY
ISO 2768-1 : 1989	GENERAL TOLERANCES - PART 1: TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS

Add To Cart

Product Format

Quantity

add to cart

ISO 286-1 : 2010(R2015)

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?