ISO 28781:2010
Current
Current
The latest, up-to-date edition.
Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French, Russian
Published date
08-06-2010
ISO 28781:2010 provides the requirements for subsurface barrier valves and related equipment as they are defined herein for use in the petroleum and natural gas industries. Included are the requirements for design, design validation, manufacturing, functional evaluation, repair, redress, handling and storage. Subsurface barrier valves provide a means of isolating the formation or creating a barrier in the tubular to facilitate the performance of pre- and/or post-production/injection operational activities in the well.
The subsurface barrier valve is not designed as an emergency or fail-safe flow controlling safety device.
ISO 28781:2010 does not cover installation and maintenance, control systems such as computer systems, and control conduits not integral to the barrier valve. Also not included in ISO 28781:2010 are products covered under ISO 17078, ISO 16070, ISO 14310, ISO 10432, ISO 10423 and the following products: downhole chokes, wellhead plugs, sliding sleeves, casing-mounted flow-control valves, injection valves, well-condition-activated valves or drill-stem test tools. ISO 28781:2010 does not cover the connections to the well conduit.
| DevelopmentNote |
Supersedes ISO/DIS 28781. (08/2010) Also numbered as API 19V. (05/2013)
|
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 28781 : 2013 | Identical |
| NBN EN ISO 28781 : 2010 | Identical |
| NEN EN ISO 28781 : 2010 | Identical |
| NS EN ISO 28781 : 1ED 2010 | Identical |
| I.S. EN ISO 28781:2010 | Identical |
| PN EN ISO 28781 : 2010 | Identical |
| SN EN ISO 28781 : 2010 | Identical |
| UNI EN ISO 28781 : 2010 | Identical |
| UNE-EN ISO 28781:2010 | Identical |
| BS EN ISO 28781:2010 | Identical |
| EN ISO 28781:2010 | Identical |
| DIN EN ISO 28781:2010-12 | Identical |
| BS EN ISO 14998:2013 | Petroleum and natural gas industries. Downhole equipment. Completion accessories |
| BS EN 1918-4:1998 | Gas supply systems. Underground gas storage Functional recommendations for storage in rock caverns |
| 11/30238890 DC : 0 | BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
| I.S. EN ISO 14998:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
| BS EN 1918-3:1998 | Gas supply systems. Underground gas storage Functional recommendations for storage in solution-mined salt cavities |
| I.S. EN 1918-1:2016 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 1: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN AQUIFERS |
| I.S. EN 1918-3:2016 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 3: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN SOLUTIONMINED SALT CAVERNS |
| I.S. EN 1918-2:2016 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN OIL AND GAS FIELDS |
| I.S. EN 1918-4:2016 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 4: FUNCTIONAL RECOMMENDATIONS FOR STORAGE IN ROCK CAVERNS |
| 14/30298608 DC : 0 | BS EN 1918-5 - GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 5: FUNCTIONAL REQUIREMENTS FOR SURFACE FACILITIES |
| PREN 1918-2 : DRAFT 2014 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL REQUIREMENTS FOR STORAGE IN OIL AND GAS FIELDS |
| PREN 1918-5 : DRAFT 2014 | GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 5: FUNCTIONAL REQUIREMENTS FOR SURFACE FACILITIES |
| NORSOK D 010 : 2013 | WELL INTEGRITY IN DRILLING AND WELL OPERATIONS |
| BS EN 1918-2:1998 | Gas supply systems. Underground gas storage Functional recommendations for storage in oil and gas fields |
| UNI EN ISO 14998 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
| API 96 : 2013 | DEEPWATER WELL DESIGN AND CONSTRUCTION |
| 14/30298596 DC : 0 | BS EN 1918-2 - GAS INFRASTRUCTURE - UNDERGROUND GAS STORAGE - PART 2: FUNCTIONAL REQUIREMENTS FOR STORAGE IN OIL AND GAS FIELDS |
| ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
| BS EN 1918-1:2016 | Gas infrastructure. Underground gas storage Functional recommendations for storage in aquifers |
| EN 1918-3:2016 | Gas infrastructure - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt caverns |
| EN 1918-2:2016 | Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields |
| EN 1918-4:2016 | Gas infrastructure - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns |
| EN ISO 14998:2013 | Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
| EN 1918-1:2016 | Gas infrastructure - Underground gas storage - Part 1: Functional recommendations for storage in aquifers |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM E 446 : 2015 : REDLINE | Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASTM E 186 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings |
| ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
| ASTM E 309 : 2016 : REDLINE | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
| ISO/TR 10949:2002 | Hydraulic fluid power Component cleanliness Guidelines for achieving and controlling cleanliness of components from manufacture to installation |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| ISO 13628-3:2000 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems |
| ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ISO 13679:2002 | Petroleum and natural gas industries Procedures for testing casing and tubing connections |
| ASTM E 273 : 2015 : REDLINE | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ISO/TS 16431:2002 | Hydraulic fluid power Assembled systems Verification of cleanliness |
| MIL-STD-792 Revision F:2006 | IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| ISO 10417:2004 | Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress |
| ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
| API MPM CH10.4 : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 10.4: DETERMINATION OF WATER AND/OR SEDIMENT IN CRUDE OIL BY THE CENTRIFUGE METHOD (FIELD PROCEDURE) |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ASME PV CODE 2D METRIC : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (METRIC) |
| ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
| ASTM E 426 : 2016 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ASME PV CODE 7 : 2017 | BPVC Section VII-BOILER AND PRESSURE VESSEL CODE - RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS |
| ISO 13665:1997 | Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
| API 5C3 : 1994 | BULLETIN ON FORMULAS AND CALCULATIONS FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES |
| ASTM E 280 : 2015 : REDLINE | Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| SAE AS 4059F : 2013 | AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
| BS 2M 54:1991 | Specification for temperature control in the heat treatment of metals |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| ASME PV CODE 2D CUSTOMARY : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (CUSTOMARY) |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| API 5C5 : 2017 | PROCEDURES FOR TESTING CASING AND TUBING CONNECTIONS |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ISO 18265:2013 | Metallic materials Conversion of hardness values |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
| ISO 10414-1:2008 | Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids |
| ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
US$201.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - Russian
PDF - Russian
PDF 3 Users - Russian
PDF 5 Users - Russian
PDF 9 Users - Russian
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.