ISO 3302-1:2014
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
07-11-2014
ISO 3302-1:2014 specifies classes of dimensional tolerances and their values for moulded, extruded, and calendared solid rubber products. The relevant test methods necessary for the establishment of compliance with ISO 3302-1:2014 are also specified.
The tolerances are primarily intended for use with vulcanized rubber but can also be suitable for products made of thermoplastic rubbers.
ISO 3302-1:2014 does not apply to precision toroidal sealing rings or to calendared composite products such as rubber-coated fabrics or products where a rubber coating is applied by the process of topping or skim coating.
Committee |
ISO/TC 45/SC 4
|
DevelopmentNote |
Supersedes ISO 3302 (04/2001) Supersedes ISO/DIS 3302-1. (07/2014)
|
DocumentType |
Standard
|
Pages |
10
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
DIN ISO 3302-1:2018-06 | Identical |
IS 16752 : 2018 | Identical |
SS-ISO 3302-1:2016 | Identical |
NF ISO 3302-1 : 2014 | Identical |
BS ISO 3302-1:2014 | Identical |
NEN ISO 3302-1 : 2014 | Identical |
SANS 3302-1:2003(R2022) | Identical |
UNE-ISO 3302-1:2023 | Identical |
SAC GB/T 3672.1 : 2002 | Identical |
DIN ISO 3302-1:2016-10 (Draft) | Identical |
SANS 3302-1 : 1ED 2003(R2016) | Identical |
UNE 53508-1:2011 | Identical |
DIN 53534:2000-04 | Corresponds |
99/123581 DC : DRAFT OCT 1999 | ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS |
ISO 11040-5:2012 | Prefilled syringes — Part 5: Plunger stoppers for injectables |
BS ISO 11040-5:2012 | Prefilled syringes Plunger stoppers for injectables |
BS F 152:2006 | Properties of silicone rubber sheet, mouldings and extrusions (general purpose). Specification |
BS ISO 11040-3:2012 | Prefilled syringes Seals for dental local anaesthetic cartridges |
DIN ISO 11040-5:2013-12 | PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012) |
03/105599 DC : DRAFT MAY 2003 | BS ISO 23529 - RUBBER - GENERAL CONDITIONS AND PROCEDURES FOR PHYSICAL TEST METHODS |
UNE-EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
10/30216993 DC : 0 | BS EN 295-4 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
05/30130019 DC : DRAFT JULY 2005 | BS F 154 - PROPERTIES OF FLUOROSILICONE RUBBER SHEET, MOULDINGS AND EXTRUSIONS - SPECIFICATION |
BS EN 14840:2005 | Joint fillers and sealants. Test methods for preformed joint seals |
09/30193399 DC : DRAFT MAY 2009 | BS ISO 23529 - RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS |
BS ISO 9631:2018 | Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material |
BS F 156:2006 | Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification |
I.S. EN 16397-2:2014 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
DIN ISO 23529:2012-10 | RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS (ISO 23529:2010) |
UNE-EN 16397-2:2015 | Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels |
BS EN 681-2:2000 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers |
ONORM EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
DEFSTAN 02-337(PT1)/2(2014) : 2014 | REQUIREMENTS FOR ELASTOMERIC TOROIDAL SEALING RINGS ('O'-RINGS) - PART 1: GENERAL AND SURFACE FINISH STANDARDS RELATIVE TO MANUFACTURER |
NF EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
DEFSTAN 93-55/3(2009) : 2009 | BUTYL RUBBER, TYPE NBC |
BS ISO 5892:2013 | Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification |
ISO 17613-1:2006 | Manually operated pumps for drinking water Selection and acceptance Part 1: Southeast Asia |
DIN EN ISO 8362-5 E : 2016 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
PREN 681-1 : DRAFT 2016 | ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
DIN EN 16397-2 E : 2015 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
BS EN 16397-2:2014 | Flexible couplings Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
10/30167702 DC : 0 | BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION |
ISO 11040-3:2012 | Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges |
ISO 9631:2018 | Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material |
BS EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings |
I.S. EN ISO 8536-2:2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
DIN EN 681-4:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements |
DIN EN 681-3:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber |
I.S. EN 295-4:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
DIN EN 681-2:2006-11 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers |
03/118042 DC : DRAFT NOV 2003 | EN 14840 - JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
BS F 157:2006 | Properties of high tear strength silicone rubber sheet, mouldings and extrusions. Specification |
03/308003 DC : DRAFT JUNE 2003 | ISO 22762-3 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 3: APPLICATIONS FOR BUILDINGS - SPECIFICATIONS |
12/30235141 DC : 0 | BS ISO 5892 - RUBBER BUILDING GASKETS - MATERIALS FOR PREFORMED SOLID VULCANIZED STRUCTURAL GASKETS - SPECIFICATION |
15/30317651 DC : 0 | BS ISO 11424 - RUBBER HOSES AND TUBING FOR AIR AND VACUUM SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
DIN EN ISO 8362-2:2016-02 | Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015) |
14/30293931 DC : 0 | BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS |
DIN ISO 8362-5:2011-06 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
DIN 3489:2001-11 | Couplings for compressed air - Claw coupling, 42 mm internal width, without securing nut - Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring |
BS ISO 17613-1:2006 | Manually operated pumps for drinking water. Selection and acceptance Southeast Asia |
BS EN ISO 8362-5:2016 | Injection containers and accessories Freeze drying closures for injection vials |
DIN 7865-1 E : 2015 | ELASTOMERIC-WATERSTOPS FOR SEALING JOINTS IN CONCRETE - PART 1: SHAPES AND DIMENSIONS |
BS ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification |
ISO 9553:1997 | Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors |
BS ISO 22762-3:2005 | Elastomeric seismic-protection isolators Applications for buildings. Specifications |
PREN 295-4 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
UNI EN 16397-2 : 2014 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
ISO 4633:2015 | Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
ISO 16010:2005 | Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
DIN EN 14188-3:2006-04 | Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
DIN EN 295-4:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
DIN EN 682:2006-10 | Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
BS EN 681-4:2000 | Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements |
UNI EN ISO 8536-2 : 2010 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 2: CLOSURES FOR INFUSION BOTTLES |
UNI EN 295-4 : 2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
UNI 11401 : 2011 | GUIDELINE FOR THERMAL BREAK PROFILES |
DIN EN 16397-2:2015-01 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
DIN ISO 15759:2006-05 | Medical infusion equipment - Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process (ISO 15759:2005) |
BS F 153:2006 | Properties of oil resistant silicone rubber sheet, mouldings and extrusions. Specification |
BS ISO 23529:2016 | Rubber. General procedures for preparing and conditioning test pieces for physical test methods |
12/30258206 DC : 0 | BS EN 16397-2 - FLEXIBLE COUPLINGS - PART 2: MATERIALS AND DIMENSIONS FOR METAL BANDED FLEXIBLE COUPLINGS |
14/30304354 DC : 0 | BS EN ISO 8362-5 - INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
BS F 154:2006 | Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification |
16/30320762 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
BS EN ISO 8362-2:2015 | Injection containers and accessories Closures for injection vials |
BS ISO 13926-2:2017 | Pen systems Plunger stoppers for pen-injectors for medical use |
DIN EN 14840 E : 2005 | JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
16/30334927 DC : 0 | BS ISO 23529 - RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS |
DIN EN ISO 8362-5:2016-07 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
04/30112025 DC : DRAFT APR 2004 | ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
NF ISO 8362-5 : 2008 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS |
DIN ISO 11040-5 E : 2013 | PREFILLED SYRINGES - PART 5: PLUNGER STOPPERS FOR INJECTABLES (ISO 11040-5:2012) |
BS ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels |
I.S. EN ISO 8362-5:2016 | INJECTION CONTAINERS AND ACCESSORIES - PART 5: FREEZE DRYING CLOSURES FOR INJECTION VIALS (ISO 8362-5:2016) |
16/30318653 DC : 0 | BS EN 681-1 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
18/30368675 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
ISO 19013-2:2016 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 2: Gasoline fuels |
ISO 23711:2003 | Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers |
ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification |
ISO 13926-2:2017 | Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use |
I.S. EN ISO 8362-2:2015 | INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION VIALS (ISO 8362-2:2015) |
DIN EN ISO 8536-2:2010-08 | Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010) |
DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
ISO 8536-2:2010 | Infusion equipment for medical use — Part 2: Closures for infusion bottles |
BS EN 681-3:2000 | Elastomeric seals. Materials requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber |
UNI EN 1097-2 : 2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
BS EN 14188-3 : 2005 | JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
ISO 8362-5:2016 | Injection containers and accessories Part 5: Freeze drying closures for injection vials |
ISO 8362-2:2015 | Injection containers and accessories — Part 2: Closures for injection vials |
BS EN ISO 8536-2:2010 | Infusion equipment for medical use Closures for infusion bottles |
BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
BS EN 682:2002 | Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids |
EN 681-4:2000/A2:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 4: CAST POLYURETHANE SEALING ELEMENTS |
EN 14188-3 : 2006 | JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
EN ISO 8536-2:2010 | Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010) |
EN 14840 : 2005 | JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
EN ISO 8362-5:2016 | Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) |
EN 681-3:2000/A2:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 3: CELLULAR MATERIALS OF VULCANIZED RUBBER |
EN 16397-2:2014 | Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
EN 682:2002/A1:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS |
EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
EN 681-2:2000/A2:2005 | ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS |
EN ISO 8362-2:2015 | Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2015) |
03/308002 DC : DRAFT JUNE 2003 | ISO 22762-2 - ELASTOMERIC SEISMIC-PROTECTION ISOLATORS - PART 2: APPLICATIONS FOR BRIDGES - SPECIFICATIONS |
03/118041 DC : DRAFT NOV 2003 | EN 14188-3 - JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATION FOR PREFORMED JOINT SEALS |
BS ISO 19013-2:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels |
14/30301958 DC : 0 | BS EN ISO 8362-2 - INJECTION CONTAINERS AND ACCESSORIES - PART 2: CLOSURES FOR INJECTION |
ISO 4635:2011 | Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification |
BS ISO 22762-2:2005 | Elastomeric seismic-protection isolators Applications for bridges. Specifications |
I.S. EN 14840:2005 | JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
ISO 5892:2013 | Rubber building gaskets Materials for preformed solid vulcanized structural gaskets Specification |
ISO 15759:2005 | Medical infusion equipment — Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process |
EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
UNE-EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
DIN 7865-1:2015-02 | ELASTOMERIC-WATERSTOPS FOR SEALING JOINTS IN CONCRETE - PART 1: SHAPES AND DIMENSIONS |
DIN EN 14840:2005-12 | Joint fillers and sealants - Test methods for preformed joint seals |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.