ISO 3601-2:2016
Current
Current
The latest, up-to-date edition.
Fluid power systems — O-rings — Part 2: Housing dimensions for general applications
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
07-19-2016
ISO 3601-2:2016 specifies the housing (gland) dimensions for class A O-rings for general industrial applications conforming to ISO 3601-1, as well as housing dimensions for class B O-rings used on selected metric-dimensioned hardware, e.g. fluid power cylinder bores and piston rods. These O-rings are for use in general hydraulic and pneumatic applications without and with anti-extrusion rings (back-up rings). The dimensions of the O-rings (d1 and d2), size codes (SC) and tolerances conform to ISO 3601-1.
Housing dimensions for the O-rings intended for aerospace applications that are specified in ISO 3601-1 are addressed in Annex A.
| Committee |
ISO/TC 131/SC 7
|
| DevelopmentNote |
Supersedes ISO/DIS 3601-2. (07/2016)
|
| DocumentType |
Standard
|
| Pages |
47
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN ISO 3601-2 : 2016 | Identical |
| BS ISO 3601-2:2016 | Identical |
| NF ISO 3601-2 : 2016 | Identical |
| SS-ISO 3601-2 : 2017 | Identical |
| DIN ISO 3601-2:2010-08 | Identical |
| SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
| 14/30304019 DC : 0 | BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES |
| CSA C22.2 No. 60079.0 : 2015 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| SAE J 2593 : 2015 | INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
| NBR IEC 60079-0 : 2013 ERRATA 2 2016 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| NF ISO 16873 : 2012 | HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BIS IS/IEC 60079-0 : 2011 | EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| 14/30304022 DC : 0 | BS ISO 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVITIES |
| 98/706002 DC : DRAFT APR 1998 | ISO/CD 3601-5 - FLUID SYSTEMS - SEALING DEVICES - O-RINGS - PART 5: ANTI-EXTRUSIONS DEVICES (BACK-UP RINGS) |
| 10/30215350 DC : 0 | BS ISO 16873 - HYDRAULIC FLUID POWER - PRESSURE SWITCHES - MOUNTING SURFACES |
| BS ISO 6263:2013 | Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces |
| BS ISO 7368:2016 | Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities |
| ISO 5597:2010 | Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| SAE AS 6235 : 2015 | FACE SEAL GLAND DESIGN, STATIC, O-RING AND OTHER SEALS FOR AEROSPACE HYDRAULIC AND PNEUMATIC APPLICATIONS |
| ISO 5781:2016 | Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces |
| ISO 6263:2013 | Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces |
| BS ISO 3601-4:2008 | Fluid power systems. O-rings Anti-extrusion rings (back-up rings) |
| BS ISO 5597:2010 | Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
| SAE ARP 1833 : 2015 | SEALING TECHNIQUES FOR MISSILE APPLICATIONS |
| ISO 7368:2016 | Hydraulic fluid power — Two-port slip-in cartridge valves — Cavities |
| IEC 60079-0:2017 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 16873:2011 | Hydraulic fluid power — Pressure switches — Mounting surfaces |
| IEC 60079-0:2017 RLV | Explosive atmospheres - Part 0: Equipment - General requirements |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| BS ISO 5781:2000 | Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| BS ISO 16873:2011 | Hydraulic fluid power. Pressure switches. Mounting surfaces |
| DIN ISO 3601-4:2010-08 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings) (ISO 3601-4:2008) |
| UNE 60715-1:2013 | Flexible hoses for connection of gas receiving installations to gas-fired appliances. Metal hose assemblies with safety gas connection valves and thread. Part 1: Elastomeric packed metallic stripwound flexible hose assemblies. |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| IEC 60079-0 REDLINE : 7.0 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| SAE MAP 3440 : 2012 | O-RING GROOVE DESIGN FOR PACKING PREFORMED, ELASTOMERIC O-RING SEALS, STATIC, RADIAL SQUEEZE, METRIC |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| EN 3748:2001 | AEROSPACE SERIES - O-RING GROOVES - DIMENSIONS |
| ISO 8785:1998 | Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| ISO 3601-4:2008 | Fluid power systems — O-rings — Part 4: Anti-extrusion rings (back-up rings) |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| ISO 13715:2017 | Technical product documentation Edges of undefined shape Indication and dimensioning |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
US$225.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.