ISO 3743-1 : 2010(R2015)

Current

Current The latest, up-to-date edition.

Preview

ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM

Publisher: International Organization for Standardization

Published: 01-01-2010

Available Formats: PDF - French, Hardcopy - French, PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test room and size of noise source under test
5 Instrumentation and measurement equipment
6 Definition, location, installation, and operation of
   noise source under test
7 Measurement procedure
8 Determination of sound power levels and sound energy levels
9 Measurement uncertainty
10 Information to be recorded
11 Test report
Annex A (normative) - Sound power level and sound energy
        level under reference meteorological conditions
Annex B (normative) - Calculation of A-weighted sound
        power levels and A-weighted sound energy levels from
        octave band levels
Annex C (informative) - Guidelines on the development of
        information on measurement uncertainty
Bibliography

Abstract - (Show below) - (Hide below)

Defines methods for determining the sound power level or sound energy level of a noise source by comparing measured sound pressure levels emitted by this source (machinery or equipment) mounted in a hard-walled test room, the characteristics of which are specified, with those from a calibrated reference sound source.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 43
Supersedes	ISO 3743-1 : 1994 ISO/DIS 3743-1 : 60.00 (2010)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DIN EN ISO 3743-1 E : 2011	Identical
DS EN ISO 3743-1 : 2010	Identical
GOST R ISO 3743-1 : 2013	Identical
NF EN ISO 3743-1 : 2012	Identical
NBN EN ISO 3743-1 : 2010	Identical
NEN EN ISO 3743-1 : 2010	Identical
NS EN ISO 3743-1 : 2010	Identical
PN EN ISO 3743-1 : 2011	Identical
SANS 3743-1 : 2ED 2012	Identical
SN EN ISO 3743-1 : 2011	Identical
AS 5333.1:2019	Identical
SS-EN ISO 3743-1:2010	Identical
DS/ISO 3743-1 : 2010	Identical
UNE EN ISO 3743-1 : 2011	Identical
BS EN ISO 3743-1 : 2009	Identical
EN ISO 3743-1 : 2010	Identical
DIN EN ISO 3743-1 : 2011	Identical
UNE EN ISO 3743-1 : 2011	Identical
SANS 3743-1 : 2ED 2012	Identical
GOST R ISO 3743-1 : 2013	Identical
SS-EN ISO 3743-1:2010	Identical
AS 5333.1:2019	Identical
DIN EN ISO 3743-1 E : 2011	Identical
PN EN ISO 3743-1 : 2011	Identical
DS EN ISO 3743-1 : 2010	Identical
DS/ISO 3743-1 : 2010	Identical
BS ISO 3743-1 : 1994 AMD 8937	Identical
DIN EN ISO 3743-1 : 2011	Identical
BS EN ISO 3743-1 : 2009	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN 15572 E : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
UNI EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
DIN EN ISO 3382-3 : 2012	ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES (ISO 3382-3:2012)
DIN EN ISO 11202 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS (ISO 11202:2010)
18/30369931 DC : 0	BS EN ISO 9902-6 - TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY
14/30275192 DC : 0	BS EN ISO 6926 - ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS
BS EN 16564 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
BS EN 60349-1 : 2010	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
CEI EN 60349-4 : 2014	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
08/30193440 DC : 0	BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE
DIN EN 1807-2 E : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
PREN 13487 : DRAFT 2017	HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
12/30265270 DC : 0	BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
DIN EN ISO 11202 E : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
UNI EN ISO 3382-3 : 2012	ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES
UNI EN 691-1 : 2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
11/30237566 DC : 0	BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
BS EN 691-1 : 2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
CSA C22.2 No. 60601.2.50 : 2010 : R2018	MEDICAL ELECTRICAL EQUIPMENT - PART 2-50: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT PHOTOTHERAPY EQUIPMENT
I.S. EN 60335-2-75:2004	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES
BS EN 13141-11 : 2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
98/715898 DC : DRAFT OCT 1998	ISO/CD 8579-1 - ACCEPTANCE CODE FOR GEAR UNITS - PART 1: TEST CODE FOR AIRBORNE SOUND
17/30309708 DC : 0	BS EN ISO 3740 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
DIN EN ISO 20361 E : 2016	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
ISO 11204 : 2010(R2015)	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
BS ISO 15664 : 2001	ACOUSTICS - NOISE CONTROL DESIGN PROCEDURES FOR OPEN PLANT
13/30289577 DC : 0	IEC 62777 - QUALITY EVALUATION METHOD FOR THE SOUND FIELD OF DIRECTIONAL LOUDSPEAKER ARRAY SYSTEM
DIN EN 1807-1 E : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
UNE-EN 1870-13:2008	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
BS EN ISO 20361 : 2015	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
CSA C22.2 No. 80601-2-35 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS OR MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
ANSI S12-5 : 2006	ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS
BS EN 1870-19 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
09/30206358 DC : DRAFT SEP 2009	BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 1870-18:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
BS EN 16430-1 : 2014	FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
DIN EN 691-1 : 2013	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
11/30232437 DC : 0	BS EN 1870-6:2002+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
12/30255711 DC : 0	BS EN 16430-1 - FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
12/30272422 DC : 0	BS EN 14462 - SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
BS EN 12102 : 2013	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
DIN EN 1870-19 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
12/30240135 DC : 0	BS ISO 11200 - ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
BS EN ISO 3382-3 : 2012	ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES (ISO 3382-3:2012)
DIN EN ISO 3744 : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
08/30195355 DC : 0	BS EN 60335-2-79 FPRAC - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS
DIN EN ISO 3746 E : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
11/30237560 DC : 0	BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
09/30182105 DC : 0	BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
DIN EN ISO 18217 : 2015	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
03/308040 DC : DRAFT MAY 2003	IEC 60704-2-2 ED. 2.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-2: PARTICULAR REQUIREMENTS FOR FAN HEATERS
UNI EN 1870-19 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
04/30122794 DC : DRAFT SEP 2004	EN 15036-1 - HEATING BOILERS - TEST REGULATIONS FOR AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 1: AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS AT PLACE OF INSTALLATION
I.S. EN 60335-2-79:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS (IEC 60335-2-79:2012 (MOD))
16/30318924 DC : 0	BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES')
BS EN 1829-1 : 2010	HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
DIN EN 691-1 E : 2013	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
BS ISO 9611 : 1996	ACOUSTICS - CHARACTERIZATION OF SOURCES OF STRUCTURE-BORNE SOUND WITH RESPECT TO SOUND RADIATION FROM CONNECTED STRUCTURES - MEASUREMENT OF VELOCITY AT THE CONTACT POINTS OF MACHINERY WHEN RESILIENTLY MOUNTED
BS EN ISO 18217 : 2015	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S)
PREN 848-3 : DRAFT 2010	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
CSA C22.2 No. 60601.2.50 : 2010 : INC : COR 1 : 2011	MEDICAL ELECTRICAL EQUIPMENT - PART 2-50: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT PHOTOTHERAPY EQUIPMENT
DIN EN 15572 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
BS ISO 8579-1 : 2002	ACCEPTANCE CODE FOR GEAR UNITS - PART 1: TEST CODE FOR AIRBORNE SOUND
15/30298375 DC : 0	BS EN 60335-2-79 ED 3.0/A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS
10/30232428 DC : DRAFT DEC 2010	BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
BS EN 60349-4 : 2013	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
14/30302844 DC : 0	BS EN 60335-2-72 ED 3.0/AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE FOR COMMERCIAL USE
04/30106849 DC : DRAFT MAY 2004	EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
13/30267124 DC : 0	BS EN 13141-11 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: POSITIVE PRESSURE VENTILATION SYSTEMS
CSA C22.2 No. 80601-2-35 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS OR MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
DIN EN ISO 11201 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
DIN EN 12012-1 : 2015	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
AAMI ISO 80601-2-35 : 2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS OR MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
DIN EN ISO 11204 E : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
DIN EN 16564 E : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
03/308041 DC : DRAFT MAY 2003	IEC 60704-2-5 ED. 2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-5: PARTICULAR REQUIREMENTS FOR ELECTRIC THERMAL STORAGE ROOM HEATERS
12/30260496 DC : 0	BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
14/30298367 DC : 0	BS EN 60335-2-67 ED 4.0/A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES; FOR COMMERCIAL USE
14/30276846 DC : 0	BS EN ISO 18217 - SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED CHAIN(S)
I.S. EN 12042:2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 11203 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
12/30263881 DC : 0	BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
10/30216251 DC : 0	BS EN 60335-2-68 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES FOR COMMERCIAL USE
14/30303313 DC : 0	PD 5304 - GUIDANCE ON SAFE USE OF MACHINERY
13/30267113 DC : 0	BS EN 13141-6 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
BS EN 1870-18 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
ANSI S12.53/2 : 1999	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
DIN EN 1870-19 E : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
11/30251965 DC : 0	BS EN 453 - FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
12/30253907 DC : DRAFT JULY 2012	BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS
ANSI S12.50 : 2002	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
DIN EN 15571 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
09/30198762 DC : 0	BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
BS ISO 27327-2 : 2014	FANS - AIR CURTAIN UNITS - PART 2: LABORATORY METHODS OF TESTING FOR SOUND POWER
DIN EN 13141-11 E : 2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
12/30253910 DC : DRAFT JULY 2012	BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES
DIN EN ISO 3382-3 E : 2012	ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES (ISO 3382-3:2012)
12/30257842 DC : 0	BS ISO 27327-2 - FANS - AIR CURTAIN UNITS - PART 2: LABORATORY METHODS OF TESTING FOR SOUND POWER
PREN 1870-3 : DRAFT 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
10/30233212 DC : 0	BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
DIN EN ISO 3745 E : 2017	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017)
BS EN 60335-2-68 : 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES, FOR COMMERCIAL USE
BS EN 62777 : 2016	QUALITY EVALUATION METHOD FOR THE SOUND FIELD OF DIRECTIONAL LOUDSPEAKER ARRAY SYSTEM
15/30300474 DC : DRAFT FEB 2015	BS ISO 19085-5 - WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS
10/30216260 DC : 0	BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE
11/30231784 DC : 0	BS EN 1870-13:2007+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
BS ISO 3743-2 : 1994 AMD 9426	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - METHODS FOR SPECIAL REVERBERATION TEST ROOMS
10/30216264 DC : 0	BS EN 60335-2-79 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS
BS EN 1807-2 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
16/30345760 DC : 0	BS EN 12102-2 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 2: HEAT PUMP WATER HEATERS
UNE-EN ISO 20361:2015	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
10/30232425 DC : DRAFT DEC 2010	BS EN 1870-15 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
10/30232422 DC : DRAFT DEC 2010	BS EN 1870-9 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
10/30232431 DC : DRAFT DEC 2010	BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
DIN EN ISO 11201 E : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
11/30237557 DC : 0	BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
16/30341470 DC : 0	BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS)
12/30232434 DC : 0	BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 16583 E : 2015	HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
DIN EN 1807-2 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
08/30182278 DC : 0	BS EN 1547:2001/A1 - INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
DIN EN 16564 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
BS EN 60349-2 : 2010	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
13/30279964 DC : 0	BS EN ISO 3743-2:1994/AMD 1 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
UNE EN 1870-18 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
UNE EN 15571 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
I.S. EN 60704-1:2010	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010 (EQV))
IEC 60335-2-79 : 4.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS
07/30164508 DC : 0	IEC 60601-2-21 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-21: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT RADIANT WARMERS
UNI EN 1829-1 : 2010	HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
14/30298371 DC : 0	BS EN 60335-2-68 ED 4.0 /A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES; FOR COMMERCIAL USE
BS PD ISO/TR 22100-1 : 2015	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS
14/30297793 DC : 0	BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES
BS EN 60335-2-79 : 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS
UNE EN 691-1 : 2013	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
12/30271386 DC : 0	BS EN 12102 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
12/30262897 DC : DRAFT JUNE 2012	BS EN 1674 - FOOD PROCESSING MACHINERY - DOUGH SHELTERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 11203 E : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
11/30237569 DC : 0	BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
SMPTE EG 16 : 2014	MEASUREMENT METHODS FOR FILM AND DIGITAL MOTION-PICTURE CAMERA ACOUSTICAL NOISE - FIELD METHOD
16/30331355 DC : 0	BS EN ISO 19085-8 - WOODWORKING MACHINES - SAFETY - PART 8: WIDE BELT CALIBRATING AND SANDING MACHINES
DIN EN ISO 3745 : 2012	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012 + AMD 1:2017)
NBR IEC 80601-2-35 : 2013 ERRATA 4 2018	MEDICAL ELECTRICAL EQUIPMENT - PART 2:35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS OR MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
11/30206274 DC : 0	BS EN 60349-4 - ELECTRIC TRACTION ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
11/30247562 DC : 0	BS EN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 16430-1 E : 2015	FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
DIN EN 15571 E : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
10/30216256 DC : 0	BS EN 60335-2-69 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
14/30293310 DC : 0	BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
17/30356590 DC : DRAFT AUG 2017	BS ISO 10494 - TURBINES AND TURBINE SETS - MEASUREMENT OF EMITTED AIRBORNE NOISE - ENGINEERING/SURVEY METHOD
DIN EN 1870-18 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
04/30126355 DC : DRAFT DEC 2004	ISO 20361 - LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY
BS EN 60601-2-21 : 2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-21: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT RADIANT WARMERS (IEC 60601-2-21:2009)
04/30110326 DC : DRAFT APR 2004	EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
BS EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
DIN EN 16430-1 : 2015	FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
11/30237563 DC : 0	BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
PREN 1870-11 : DRAFT 2011	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
16/30335973 DC : 0	BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE)
UNI EN ISO 10821 : 2010	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
DIN EN 16583 : 2015	HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
UNI ISO 13347-1 : 2009	INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW
BS EN 60335-2-67 : 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE
BS 848-2.2(2004) : 2004	INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 2: REVERBERANT ROOM METHOD
UNE EN 12102 : 2014	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
I.S. EN 60335-2-69:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH FOR COMMERCIAL USE (IEC 60335-2-69:2012 (MOD))
BS 848-2.5(2003) : 2003	ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
CSA Z107.58 : 2015	NOISE EMISSION DECLARATIONS FOR MACHINERY
DIN ISO 15665 : 2011	ACOUSTICS - ACOUSTIC INSULATION FOR PIPES, VALVES AND FLANGES
BS EN 60704-2-2 : 2010	HOUSEHOLD AND SIMILAR APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-2: PARTICULAR REQUIREMENTS FOR FAN HEATERS
BS EN 62121 : 2001	METHODS OF MEASUREMENT FOR MINIDISC RECORDERS/PLAYERS
12/30261708 DC : DRAFT MAR 2012	BS EN 60335-2-99 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
DIN ISO 15665 E : 2011	ACOUSTICS - ACOUSTIC INSULATION FOR PIPES, VALVES AND FLANGES
BS EN 60704-2-11 : 1999	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PARTICULAR REQUIREMENTS - PART 2-11: ELECTRICALLY OPERATED FOOD PREPARATION APPLIANCES
UNE EN 16564 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
ISO 27327-2 : 2014	FANS - AIR CURTAIN UNITS - PART 2: LABORATORY METHODS OF TESTING FOR SOUND POWER
11/30244804 DC : 0	BS EN 940:2009/A1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
BS ISO 15665 : 2003	ACOUSTICS - ACOUSTIC INSULATION FOR PIPES, VALVES AND FLANGES
DIN EN ISO 3740 E : 2001	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
DIN EN 1829-1 : 2010	HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
07/30094858 DC : 0	BS ISO 3747 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
DIN EN ISO 20361 : 2016	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
16/30318928 DC : 0	BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES
09/30197984 DC : 0	BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
NBR IEC 60034-9 : 2011	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
BS EN 60335-2-72 : 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE
07/30151731 DC : 0	BS IEC 80601-2-35 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF BLANKETS, PADS AND MATTRESSES, INTENDED FOR HEATING IN MEDICAL USE
10/30216247 DC : 0	BS EN 60335-2-67 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE
NF EN 80601-2-35 : 2010 AMD 1 2017	MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS AND MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
15/30265239 DC : 0	BS EN 60335-2-69 AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
05/30133333 DC : DRAFT MAY 2005	EN 860 - SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
DIN EN 1829-1 E : 2010	HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
BS ISO 13347-2 : 2004	INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 2: REVERBERANT ROOM METHOD
18/30369856 DC : 0	BS EN ISO 20361 - LIQUID PUMPS AND PUMPS UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY
PREN 13053 : DRAFT 2017	VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
PREN 14462 : DRAFT 2012	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
07/30161919 DC : 0	EN 940 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
BS EN 15572 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
04/301783 DC : DRAFT JAN 2004	EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
PREN ISO 11200 : DRAFT 2012	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012)
09/30178334 DC : DRAFT FEB 2009	BS EN 1870-8:2001/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
BS EN 12012-1 : 2007	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
IEC 60335-2-69 REDLINE : 5.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
UNE EN ISO 18217 : 2016	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
05/30133339 DC : DRAFT MAY 2005	EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
ANSI S12-5 : 2006	ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS
CSA C22.2 No. 60335-2-67 : 2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE
04/30117319 DC : 0	BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE
DIN EN 12102 E : 2013	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
UNI EN 1870-18 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
05/30133297 DC : DRAFT MAY 2005	EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
04/301784 DC : DRAFT JAN 2004	EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
UNE EN 16430-1 : 2015	FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
BS EN 60704-1 : 2010	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS
UNE EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
AAMI IEC 60601-2-50 : 2009	MEDICAL ELECTRICAL EQUIPMENT - PART 2-50: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT PHOTOTHERAPY EQUIPMENT
CEI EN 60335-2-69 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
BS 848-2.1(2004) : 2004	INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW
CEI EN 60335-2-67 : 2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE
UNI EN 12012-4 : 2008	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
BS EN 60034-9 : 2005	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
09/30178331 DC : DRAFT FEB 2009	BS EN 1870-7:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
08/30195341 DC : 0	BS EN 60335-2-67 FPRAB - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT AND FLOOR CLEANING MACHINES, FOR INDUSTRIAL AND COMMERCIAL USE
02/705139 DC : DRAFT APR 2002	PREN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
08/30175655 DC : DRAFT APR 2008	BS EN 1265 AMD 1 - SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
09/30182101 DC : 0	BS EN 60349-1 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
UNE EN 1807-2 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
ANSI S12-5 : 2006 : R2011	ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS
ANSI S12.53/2 : 1999	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
DIN EN 13141-11 : 2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
I.S. EN 60349-4:2013	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER (IEC 60349-4:2012 (EQV))
DIN EN 1807-1 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
DIN EN 12012-4 E : 2010	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
DIN EN ISO 3746 : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
I.S. EN 60335-2-67:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE (IEC 60335-2-67:2012 (MOD))
BS EN 16583 : 2015	HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
ISO 10494 : 1993	TURBINES AND TURBINE SETS - MEASUREMENT OF EMITTED AIRBORNE NOISE - ENGINEERING/SURVEY METHOD
DIN EN 1870-18 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS
NBR ISO 9902-1 : 2005	TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS
DIN EN 12102 : 2013	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
DD IEC PAS 60704-2-15 : 2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-15: PARTICULAR REQUIREMENTS FOR HOUSEHOLD FOOD WASTE DISPOSERS
CEI EN 60349-2 : 2012	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
DIN EN ISO 18217 E : 2015	SAFETY OF WOODWORKING MACHINES - EDGEBANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
NF EN 60034-9 : 2005 AMD 1 2007	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
PREN 1870-6 : DRAFT 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
EEMUA 140 : 2014	NOISE PROCEDURE SPECIFICATION
I.S. EN 13141-11:2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
BS EN 12042 : 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
IEC 60335-2-68 : 4.1	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES, FOR COMMERCIAL USE
UNE-EN 1870-6:2003	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN 1807-1:2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS
I.S. EN 62777:2016	QUALITY EVALUATION METHOD FOR THE SOUND FIELD OF DIRECTIONAL LOUDSPEAKER ARRAY SYSTEM
I.S. EN ISO 3740:2000	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
I.S. EN 12102:2013	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
I.S. EN ISO 18217:2015	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015)
I.S. EN 1807-2:2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
BS EN 60335-2-69 : 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH FOR COMMERCIAL USE
PREN 1870-12 : DRAFT 2011	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
ISO TR 22100-1 : 2015	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS
I.S. EN 60335-2-72:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE (IEC 60335-2-72:2012 (MOD))
ANSI S12.50 : 2002	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
DIN EN ISO 11204 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
SR CEN ISO/TR 22100-1:2017	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
UNI EN 1807-2 : 2013	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES
I.S. EN 15572:2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
ANSI S12.57 : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
BS ISO 13347-1 : 2004	INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW
BS EN 60268-5 : 2003	SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
I.S. EN 16564:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
I.S. EN 15571:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
BS EN 60335-2-75 : 2004	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-75: PARTICULAR REQUIREMENTS FOR COMMERCIAL DISPENSING APPLIANCES AND VENDING MACHINES
I.S. EN 1829-1:2010	HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
I.S. EN 60034-9:2005	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
BS EN 60704-2-13 : 2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-13: PARTICULAR REQUIREMENTS FOR RANGE HOODS AND OTHER COOKING FUME EXTRACTORS
I.S. EN 60704-2-13:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-13: PARTICULAR REQUIREMENTS FOR RANGE HOODS AND OTHER COOKING FUME EXTRACTORS
CEI EN 60335-2-68 : 2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES FOR COMMERCIAL USE
PREN 453 : DRAFT 2011	FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 19085-1:2017	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
I.S. EN 1870-19:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS
ISO 3740 : 2000(R2013)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
PREN 12102-2 : DRAFT 2016	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 2: HEAT PUMP WATER HEATERS
ISO 13347-2 : 2004(R2015)	INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 2: REVERBERANT ROOM METHOD
ISO 3743-2 : 2018	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
CSA C22.2 No. 80601-2-35 : 2012(R2016)	MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS OR MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
CEI EN 60349-1 : 2012	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
PREN 13141-6 : DRAFT 2012	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
UNE EN 13141-11 : 2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
ISO 19085-1 : 2017	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
ISO 13261-1 : 1998(R2015)	SOUND POWER RATING OF AIR-CONDITIONING AND AIR-SOURCE HEAT PUMP EQUIPMENT - PART 1: NON-DUCTED OUTDOOR EQUIPMENT
UNE EN 1829-1 : 2010	HIGH PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 1: MACHINES
EN 12042 : 2014 COR 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 60268-5:2003	SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
I.S. EN 16583:2015	HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
ANSI/ASA S12.54/ISO 3744 : 2011(R2016)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
I.S. EN 691-1:2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 12042 : 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
UNI EN 12042 : 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1870-6 : 2017	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
BS EN ISO 19085-1 : 2017	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
UNE-EN ISO 19085-1:2018	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
ANSI/ASA S12.53 PART 2 : 1999(R2015)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
ANSI S12.51 : 2012	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
ANSI S12.53/2 : 1999 : R2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
ANSI S12.54 : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
ANSI/ASA S12.57 : 2011(R2016)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
ANSI S12.50 : 2002 : R2012	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
ANSI S12.55 : 2012	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS
ANSI S12.54 : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
ANSI/ASA S12.50/ISO 3740 : 2002(R2017)	Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards - Nationally Adopted International Standards
ANSI S12.51 : 2012	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
ANSI S12.50 : 2002 : R2007	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
ANSI S12.51 : 2012 : R2017	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
ANSI/ASA S12.56/ISO 3746 : 2011(R2016)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
ANSI S12.56 : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
I.S. EN 16430-1:2014	FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
17/30339487 DC : 0	BS EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
DIN EN 12012-1 E : 2010	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
BS PD CEN ISO/TR 22100-1 : 2017	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
ANSI S12.56 : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
17/30361327 DC : 0	BS EN 13487 - HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
PREN 1870-10 : DRAFT 2011	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
CSA C22.2 No. 80601-2-35 : 2012 : INC : COR 1 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEATING DEVICES USING BLANKETS, PADS OR MATTRESSES AND INTENDED FOR HEATING IN MEDICAL USE
IEC PAS 60704-2-15 : 1.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-15: PARTICULAR REQUIREMENTS FOR HOUSEHOLD FOOD WASTE DISPOSERS
BS EN 60704-2-3 : 2002	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-3: PARTICULAR REQUIREMENTS FOR DISHWASHERS
UNE-EN 1870-14:2008	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
CSA C22.2 No. 60601.2.50 : 2010	MEDICAL ELECTRICAL EQUIPMENT - PART 2-50: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT PHOTOTHERAPY EQUIPMENT
UNI EN 12102 : 2014	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
CSA C22.2 No. 60601.2.50 : 2010FR	MEDICAL ELECTRICAL EQUIPMENT - PART 2-50: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT PHOTOTHERAPY EQUIPMENT
CEI EN 60335-2-72 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE FOR COMMERCIAL USE
PREN 12042 : DRAFT 2011	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
UNE EN 16583 : 2016	HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
PREN 12102 : DRAFT 2012	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
PREN 60335-2-72 : DRAFT 2008	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE
EN ISO 19085-1 : 2017 COR 2018	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
EN 12301 : 2000 + A1 2008	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
I.S. EN 61096:1993	METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS
BS EN 15571 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
10/30094845 DC : 0	BS ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC TEST ROOMS AND HEMI-ANECHOIC TEST ROOMS
01/202453 DC : DRAFT APRIL 2001	IEC 60034-9 ED.4 - ROTATING ELECTRICAL MACHINERY - PART 9: NOISE LIMITS
08/30178810 DC : DRAFT MAY 2008	BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
CEN ISO/TR 22100-1 : 2017	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 1: HOW ISO 12100 RELATES TO TYPE-B AND TYPE-C STANDARDS (ISO/TR 22100-1:2015)
I.S. EN 60349-2:2010	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
I.S. EN ISO 3382-3:2012	ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES (ISO 3382-3:2012)
I.S. EN 60349-1:2010	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
14/30293313 DC : 0	BS EN ISO 19085-2 - WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES
DIN EN ISO 3744 E : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
UNE EN 60349-4 : 2013	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
15/30302620 DC : 0	BS EN ISO 19085-4 - WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES
I.S. EN 12012-4:2006	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
CEI EN 60704-2-13 : 2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-13: PARTICULAR REQUIREMENTS FOR RANGE HOODS AND OTHER COOKING FUME EXTRACTORS
ISO 13347-1 : 2004	INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVELS UNDER STANDARDIZED LABORATORY CONDITIONS - PART 1: GENERAL OVERVIEW
ISO 10843 : 1997(R2018)	ACOUSTICS - METHODS FOR THE DESCRIPTION AND PHYSICAL MEASUREMENT OF SINGLE IMPULSES OR SERIES OF IMPULSES
EN 12012-1 : 2007 + A1 2008	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
UNI EN 12012-1 : 2008	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
EN ISO 3740 : 2000	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
BS EN ISO 3740 : 2001	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
DIN EN 1870-4 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
I.S. EN ISO 20361:2015	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO/FDIS 20361:2015)
I.S. EN 12012-1:2007	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
IEC 60335-2-72 : 4.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE
BS EN 12301 : 2000	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
IEC 60335-2-67 : 4.1	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE
ISO 15665 : 2003(R2013)	ACOUSTICS - ACOUSTIC INSULATION FOR PIPES, VALVES AND FLANGES
I.S. EN 12301:2000	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
I.S. EN 60335-2-68:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES, FOR COMMERCIAL USE (IEC 60335-2-68:2012 (MOD))
IEC 60335-2-69 : 5.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
IEC 60704-2-3 : 3.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-3: PARTICULAR REQUIREMENTS FOR DISHWASHERS
ISO TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
EN ISO 3746 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
IEC 60704-2-13 : 3.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-13: PARTICULAR REQUIREMENTS FOR RANGE HOODS AND OTHER COOKING FUME EXTRACTORS
I.S. EN 1870-6:2017	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD
ISO 8579-1 : 2002(R2019)	ACCEPTANCE CODE FOR GEAR UNITS - PART 1: TEST CODE FOR AIRBORNE SOUND
DIN EN 1673 : 2010	FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 11691 : 2010	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
I.S. EN ISO 3743-2:2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TESTS ROOMS
UNE-EN 60601-2-21:2010	Medical electrical equipment -- Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
UNE-EN ISO 11201:2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
EN ISO 11200 : 2014	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
I.S. EN ISO 11200:2014	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012)
ONORM EN 12301 : 2009	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DIN EN ISO 9902-6 E : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 1870-11 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 1807 E : 1999	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 12750 : 2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
DIN EN 1870-17 : 2015	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 1870-4 E : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 13112 E : 2011	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
DIN EN 13113 E : 2011	TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
DIN EN 1218-3 E : 2009	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
DIN EN ISO 11546-1 E : 2010	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
DIN EN 1870-15 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
DIN EN ISO 1680 E : 2014	ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013)
DIN EN 12545 : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
DIN EN 1265 E : 2009	SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
DIN EN ISO 6926 : 2016	ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS (ISO 6926:2016)
DIN EN 1870-9 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 13113 : 2011	TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
DIN EN 1870-7 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
DIN EN 12215 : 2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 1870-3 E : 2015	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
DIN EN 15036-1 E : 2006	HEATING BOILERS - TEST REGULATIONS FOR AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 1: AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS
DIN EN 1807 : 2010	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
DIN EN 13114 : 2010	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
DIN EN 13114 E : 2010	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
DIN EN 1870-14 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
DIN EN 1674 : 2015	FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 11546-2 E : 2010	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
DIN EN 12984 : 2011	FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13112 : 2011	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
DIN EN 1870-5 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 12301 : 2015	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DIN EN 12354-5 : 2009	BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
DIN EN 1870-1 E : 1999	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 1870-10 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 1218-2 E : 2009	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
DIN EN 12981 : 2010	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 1218-1 E : 2010	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE-END TENONING MACHINES WITH SLIDING TABLE
DIN EN 1870-13 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
DIN EN 1265 : 2009	SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
DIN EN 1870-8 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
DIN EN 1218-1 : 2010	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
DIN EN 13141-8 : 2014	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM
DIN EN 13141-7 : 2011	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
DIN EN ISO 9902-4 E : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 453 E : 2015	FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1218-3 : 2009	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
DIN EN 1870-7 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
DIN EN 13355 : 2010	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN ISO 12001 E : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE
DIN EN 13141-6 E : 2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
DIN EN 1870-12 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
DIN EN ISO 10821 E : 2013	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009)
DIN EN 15036-1 : 2006	HEATING BOILERS - TEST REGULATIONS FOR AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 1: AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS
DIN EN 1870-16 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
DIN EN ISO 9902-1 E : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 13141-6 : 2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
DIN EN 12012-3 : 2010	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
DIN EN 1218-5 E : 2010	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
DIN EN ISO 11200 : 2014	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
DIN EN 12301 E : 2010	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DIN EN 1870-9 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
DIN EN 1870-3 : 2015	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
DIN EN 1218-2 : 2009	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
DIN EN 12012-4 : 2010	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
DIN EN 13141-7 E : 2011	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
DIN EN 1870-5 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
DIN EN 454 E : 2015	FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 12545 E : 2010	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
DIN EN ISO 3743-2 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
DIN EN ISO 10821 : 2013	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009)
DIN EN 1870-14 E : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
DIN EN 1218-5 : 2010	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
DIN EN 1870-11 E : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN 453 : 2015	FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 861 E : 2012	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
DIN EN ISO 5136 E : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
DIN EN ISO 4871 E : 2009	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
DIN EN ISO 11546-1 : 2010	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
DIN EN 940 : 2012	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
DIN EN 12984 E : 2011	FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 5136 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
DIN EN 861 : 2012	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
DIN EN ISO 6926 E : 2016	ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS (ISO 6926:2016)
DIN EN 12750 E : 2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
DIN EN ISO 12001 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE
DIN EN 1870-13 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
DIN EN 859 : 2012	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
DIN EN ISO 11689 : 1997	ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE EMISSION-DATA FOR MACHINERY AND EQUIPMENT
DIN EN 1870-17 E : 2015	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
DIN EN ISO 11691 E : 2010	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
DIN EN 1870-1 : 2009	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 12215 E : 2010	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN ISO 11546-2 : 2010	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
DIN EN 848-3 : 2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
DIN EN 860 : 2012	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
DIN EN ISO 4871 : 2009	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
DIN EN 1870-12 E : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
DIN EN 940 E : 2012	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
DIN EN ISO 1680 : 2014	ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013)
DIN EN 848-1 : 2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
DIN EN 12012-3 E : 2010	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
DIN EN 859 E : 2012	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
DIN EN 1870-16 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
DIN EN 12981 E : 2010	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 454 : 2015	FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1870-15 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
DIN EN 848-2 : 2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
DIN EN ISO 3747 : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
DIN EN ISO 3741 : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
DIN EN 14462 : 2015	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
DIN EN 1673 E : 2010	FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 1870-8 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
DIN EN 14462 E : 2015	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
DIN EN 12354-5 E : 2009	BUILDING ACOUSTICS - ESTIMATION OF ACOUSTIC PERFORMANCE OF BUILDING FROM THE PERFORMANCE OF ELEMENTS - PART 5: SOUNDS LEVELS DUE TO THE SERVICE EQUIPMENT
DIN EN 860 E : 2012	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
DIN EN ISO 3741 E : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
DIN EN ISO 3747 E : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
DIN EN 1870-10 E : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
BS EN 1870-2 : 1999	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
I.S. EN 861:2007	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
BS EN ISO 3741 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION ROOMS
UNE-EN ISO 11200:2014	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
UNE-EN 1870-4:2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
BS EN ISO 11691 : 1997	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
UNE-EN 1870-7:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
BS EN 12984 : 2005	FOOD PROCESSING MACHINERY - PORTABLE AND/OR HAND-GUIDED MACHINES AND APPLIANCES WITH MECHANICALLY DRIVEN CUTTING TOOLS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 859 : 2007	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
ISO 3746 : 2010(R2015)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
BS EN 1870-16 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
UNE-EN 13141-8 : 2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM
UNE-EN 1674:2015	FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 12012-2 : 2001	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
BS EN ISO 11202 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
ISO 11690-1 : 1996(R2011)	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - PART 1: NOISE CONTROL STRATEGIES
BS EN 12012-4 : 2006	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
BS EN 1870-8 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
BS EN 1218-1 : 1999	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE
BS PD ISO/TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
UNE EN 13141-7 : 2011	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
BS EN 848-3 : 2012	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
BS EN ISO 1680 : 2013	ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES
UNE EN ISO 3747 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT (ISO 3747:2010)
BS EN ISO 11689 : 1997	ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT
BS EN 15036-1 : 2006	HEATING BOILERS - TEST REGULATIONS FOR AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 1: AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS
BS EN 12639 : 2000	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY
BS EN ISO 10821 : 2005	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
BS EN 1870-12 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES
BS EN 453 : 2014	FOOD PROCESSING MACHINERY - DOUGH MIXERS - SAFETY AND HYGIENE REQUIREMENTS
UNE-EN 60335-2-79:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-79: PARTICULAR REQUIREMENTS FOR HIGH PRESSURE CLEANERS AND STEAM CLEANERS
BS EN ISO 5136 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
ISO 10821 : 2005(R2015)	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
BS EN ISO 11821 : 1997	ACOUSTICS - MEASUREMENTS OF THE IN SITU SOUND ATTENUATION OF A REMOVABLE SCREEN
ISO 11546-1 : 1995(R2015)	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
BS EN 848-1 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
UNE-EN 60349-2:2011	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
ISO 6926 : 2016	ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES FOR THE DETERMINATION OF SOUND POWER LEVELS
BS EN 1218-2 : 2004	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS
UNE EN ISO 11203 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
DIN EN 848-3 E : 2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
BS EN 861 : 2007	SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
ISO 3745 : 2012(R2017)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS
UNE EN ISO 5136 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
UNE-EN 60335-2-67:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE
BS EN 12215 : 2004	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
BS EN 12981 : 2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN ISO 11200 E : 1996	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
ISO 4871 : 1996(R2013)	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
IEC 60349-2 : 3.0	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
ISO 5136 : 2003(R2018)	ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD
BS EN 13355 : 2004	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS EN 1870-7 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING
BS EN 940 : 2009	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
UNE-EN 1870-10:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
UNE-EN 60335-2-72:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE
BS EN ISO 11546-1 : 1996	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
ISO 11689 : 1996(R2017)	ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT
BS EN ISO 3744 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
UNE-EN 60335-2-69:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH FOR COMMERCIAL USE
ISO 11203 : 1995(R2011)	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
DIN EN 848-1 E : 2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
BS EN 1870-15 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
BS EN 1870-9 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
BS EN ISO 11201 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
BS EN 14462 : 2015	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
BS EN 454 : 2014	FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 11690-2 : 1997	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACE MACHINERY - PART 2: NOISE CONTROL MEASURES
BS EN 1870-17 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
BS EN ISO 3743-2 : 1997	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TESTS ROOMS
BS EN 1870-10 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES
BS EN 1673 : 2000	FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
BS EN ISO 3745 : 2012	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS
I.S. EN 859:2007	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES
BS EN ISO 9614-3 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
BS EN 13141-7 : 2010	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
I.S. EN 860:2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS EN ISO 9902-4 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY
ISO 11201 : 2010(R2015)	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
BS EN 13141-6 : 2014	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
BS EN 1870-14 : 2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES
BS EN 1870-1 : 2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
DIN EN 848-2 E : 2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
BS EN 1218-3 : 2001	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS
ISO 9614-3:2002(R2018)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
DIN EN ISO 9902-6 : 2014	TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001 + AMD 1:2009 + AMD 2:2014)
BS EN ISO 6926 : 2016	ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS
ISO 11691 : 1995(2010)	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
ISO 3744:2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
BS EN 1674 : 2015	FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
ISO 11202 : 2010(R2015)	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
ONORM EN ISO 20361 : 2015	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
BS EN 1218-4 : 2004	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S)
BS EN ISO 11690-1 : 1997	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACE CONTAINING MACHINERY - PART 1: NOISE CONTROL STRATEGIES
BS EN 13112 : 2002	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
BS EN ISO 11546-2 : 2009	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
BS EN ISO 11203 : 2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
UNI EN ISO 11200 : 2014	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
ISO 9902-1 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS
EN ISO 20361 : 2015 COR 2015	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
ISO 11200 : 2014	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
DIN EN ISO 9902-4 : 2014	TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014)
UNE EN ISO 3743-2 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
BS EN 1746 : 1999	SAFETY OF MACHINERY - GUIDANCE FOR THE DRAFTING OF THE NOISE CLAUSES OF SAFETY STANDARDS
UNE-EN 1870-15:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING
ISO 12001 : 1996(R2017)	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE
UNE EN ISO 3743-2 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
UNE EN 13114 : 2002	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
BS EN 1807 : 1999	SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES
BS EN ISO 9902-1 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS
ISO 1680 : 2013(R2018)	ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES
BS EN 1870-3 : 2014	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES
UNE-EN 454:2015	FOOD PROCESSING MACHINERY - PLANETARY MIXERS - SAFETY AND HYGIENE REQUIREMENTS
ISO 20361 : 2015	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY
IEC 60268-5 : 3.1	SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS
DIN EN 1674 E : 2015	FOOD PROCESSING MACHINERY - DOUGH SHEETERS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 1265 : 1999	SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
ISO 9902-4 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY
BS EN ISO 9902-6 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY
UNE EN ISO 3744 : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
IEC 60704-1 : 3.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 1: GENERAL REQUIREMENTS
UNE-EN 12750:2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
BS EN 12545 : 2000	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
BS EN 1218-5 : 2004	SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN
UNE EN ISO 9614-3 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
BS EN 12750 : 2013	SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
UNE EN ISO 12001 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE
BS EN 1870-11 : 2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS)
UNE EN ISO 11546-2 : 2010	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
BS EN 1870-4 : 2012	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING
UNI EN 12301 : 2008	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
ISO 3382-3 : 2012(R2017)	ACOUSTICS - MEASUREMENT OF ROOM ACOUSTIC PARAMETERS - PART 3: OPEN PLAN OFFICES
ISO 18217 : 2015	SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S)
UNE-EN 860:2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
BS EN ISO 3746 : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
BS EN 1870-13 : 2007	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES
IEC 62121 : 1.0	METHODS OF MEASUREMENT FOR MINIDISC RECORDERS/PLAYERS
UNE EN 13112 : 2002	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
DIN EN ISO 3743-2 E : 2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TESTS ROOMS
IEC 60034-9 : 4.1	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
ISO 9902-6 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY
BS EN 13114 : 2002	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
UNE-EN 13141-6:2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
UNE EN ISO 3746 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE (ISO 3746:2010)
BS EN ISO 3747 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
UNE-EN 1870-9:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING
IEC 60349-4 : 1ED 2012	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
BS EN ISO 11204 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
BS EN ISO 11200 : 2014	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS
BS EN 13113 : 2002	TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
UNE-EN 1870-16:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING
IEC 60349-1 : 2.0	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
ISO 11546-2 : 1995(R2015)	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
UNE-EN 60349-1:2011	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
UNE EN 940 : 2010	SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES
BS EN ISO 4871 : 2009	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
BS EN ISO 12001 : 2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE
UNE-EN ISO 3741:2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
IEC 62777 : 1ED 2016	QUALITY EVALUATION METHOD FOR THE SOUND FIELD OF DIRECTIONAL LOUDSPEAKER ARRAY SYSTEMS
UNE EN 859 : 2008	SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES
BS EN 1870-5 : 2002	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAW BENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES
BS EN 13141-8 : 2014	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM
UNE-EN 60335-2-68:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES, FOR COMMERCIAL USE
BS EN 860 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES
UNE EN 13113 : 2002	TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
UNE EN ISO 4871 : 2010	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
DIN EN 13355 E : 2010	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN ISO 9902-1 : 2014	TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014)
UNE-EN 1870-8:2013	SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING
ISO 3747:2010(R2015)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
BS EN 848-2 : 2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
IEC 60704-2-11 : 1.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-11: PARTICULAR REQUIREMENTS FOR ELECTRICALLY-OPERATED FOOD PREPARATION APPLIANCES
ISO 3741 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
UNE EN ISO 6926 : 2016	ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS (ISO 6926:2016)
UNE-EN 60704-2-13:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-13: PARTICULAR REQUIREMENTS FOR RANGE HOODS AND OTHER COOKING FUME EXTRACTORS
UNE-EN 848-1:2008	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES
UNE-EN 848-3:2013	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES
EN ISO 11203 : 2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
UL 60335-2-67 : 1ED 2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE
UL 60335-2-72 : 1ED 2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE
I.S. EN 848-2:2007	SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES
UNI EN ISO 11203 : 2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
ONORM EN ISO 11200 : 2014	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
I.S. EN ISO 11203:2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
I.S. EN ISO 6926:2016	ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS (ISO 6926:2016)
ONORM EN 12042 : JUN 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
EN 1673 : 2000 + A1 2009	FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
EN 16564 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
DIN EN 12042 E : 2014	FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
EN ISO 11690-1 : 1996	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - NOISE CONTROL STRATEGIES
EN ISO 6926 : 2016	ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES USED FOR THE DETERMINATION OF SOUND POWER LEVELS (ISO 6926:2016)
EN 15571 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
EN ISO 11691 : 2009	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
I.S. EN 1673:2000	FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 11691:2009	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD

Standards Referencing This Book - (Show below) - (Hide below)

ISO 7574-2:1985(R2012)	ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - PART 2: METHODS FOR STATED VALUES FOR INDIVIDUAL MACHINES
AS 5339:2019	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment
ISO 4871 : 1996(R2013)	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
ISO 12001 : 1996(R2017)	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE
AS 5337:2019	Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
AS 5102.1:2019	Performance of household electrical appliances - Swimming pool pump-units Measurement of energy consumption and performance
ISO 3744:2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
ISO 3743-2 : 1994	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS
ISO 7574-4:1985(R2012)	ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - PART 4: METHODS FOR STATED VALUES FOR BATCHES OF MACHINES
ISO TR 25417 : 2007(R2013)	ACOUSTICS - DEFINITIONS OF BASIC QUANTITIES AND TERMS
ISO 9614-1 : 1993(R2018)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 1: MEASUREMENT AT DISCRETE POINTS
IEC 60942 : 3.0	ELECTROACOUSTICS - SOUND CALIBRATORS
ISO 9296 : 2017	ACOUSTICS - DECLARED NOISE EMISSION VALUES OF INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT
AS 5336:2019	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms
ISO 3747:2010(R2015)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
AS 5335:2019	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
ISO 3740 : 2000(R2013)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
ISO 9613-1 : 1993(R2015)	ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 1: CALCULATION OF THE ABSORPTION OF SOUND BY THE ATMOSPHERE
ISO 9614-2 : 1996(R2018)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING
ISO 7574-1:1985(R2012)	ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - PART 1: GENERAL CONSIDERATIONS AND DEFINITIONS
2006/42/EC : 2006 AMD 4 2014	DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 MAY 2006 ON MACHINERY, AND AMENDING DIRECTIVE 95/16/EC (RECAST) (TEXT WITH EEA RELEVANCE)
ISO 80000-8 : 2007(R2012)	QUANTITIES AND UNITS - PART 8: ACOUSTICS
ISO 3746 : 2010(R2015)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
ISO 6926 : 2016	ACOUSTICS - REQUIREMENTS FOR THE PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES FOR THE DETERMINATION OF SOUND POWER LEVELS
ISO 9614-3:2002(R2018)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
IEC 61672-1 : 2010	ELECTROACOUSTICS - SOUND LEVEL METERS - PART 1: SPECIFICATIONS
ISO 7574-3:1985(R2012)	ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - PART 3: SIMPLE (TRANSITION) METHOD FOR STATED VALUES FOR BATCHES OF MACHINES
ISO 3741 : 2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
ISO 3745 : 2012(R2017)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS
AS 5333.2:2019	Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms
IEC 61260 : 1.0	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE BAND FILTERS
AS 5332:2019	Determination of sound power levels of noise sources - Guidelines for the use of basic standards
ISO/IEC GUIDE 98-3 : 2008	UNCERTAINTY OF MEASUREMENT - PART 3: GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT (GUM:1995)

Add To Cart

Product Format

Quantity

add to cart

ISO 3743-1 : 2010(R2015)

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?