ISO 472 : 2013

Current

Current The latest, up-to-date edition.

Preview

PLASTICS - VOCABULARY

Publisher: International Organization for Standardization

Published: 01-01-2013

Available Formats: PDF - Russian, Hardcopy - Russian, PDF - English - French, Hardcopy - English - French
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Terms and definitions
Bibliography

Abstract - (Show below) - (Hide below)

Describes terms used in the plastics industry, including terms and definitions appearing in plastics standards (of ISO/TC 61) and general terms and definitions of polymer science used in all aspects of plastics technology.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 61
Supersedes	ISO 472 : 1999 ISO/DIS 472 : 60.00 (2012)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
SN EN ISO 472 : 2013	Identical
UNI EN ISO 472 : 2013	Identical
UNE-EN ISO 472:2015	Identical
NF EN ISO 472 : 2013	Identical
NS EN ISO 472 : 2013	Identical
NBN EN ISO 472 : 2013	Identical
DS EN ISO 472 : 2013	Identical
EN ISO 472 : 2013	Identical
SS-EN ISO 472 :2013	Identical
DIN EN ISO 472 : 2013	Identical
I.S. EN ISO 472:2013	Identical
PN EN ISO 472 : 2013	Identical
NEN EN ISO 472 : 2013	Identical
BS EN ISO 472 : 2013	Identical
ONORM EN ISO 472 : 2013	Identical
BS EN ISO 472 : 2013	Identical
NBN T 40 001 : 1982	Identical
NF ISO 472 : 1996	Identical
DS EN ISO 472 : 2013	Identical
DIN 55958 : 1988	Similar to
NEN ISO 472 : 1999	Identical
BS 1755-2(1974) : 1974	Similar to
PN EN ISO 472 : 2013	Identical
NBN EN 1852-1 : 2009	Identical
SS-EN ISO 472 :2013	Identical
SNV ISO 472 : 1988	Identical
ONORM EN ISO 472 : 2013	Identical
BS ISO 472 : 1988	Identical
BIS IS 2828 : 2001 AMD 1	Identical
NFT 76 001 : 1981	Similar to
UNE-EN ISO 472:2015	Identical
DIN EN ISO 472 : 2013	Identical
I.S. EN ISO 472:2013	Identical
IS 2828 : 2019	Identical
EN ISO 472 : 2013	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

UNE EN ISO 20568-1 : 2017	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017)
ISO 21930 : 2017	SUSTAINABILITY IN BUILDINGS AND CIVIL ENGINEERING WORKS - CORE RULES FOR ENVIRONMENTAL PRODUCT DECLARATIONS OF CONSTRUCTION PRODUCTS AND SERVICES
ASTM D 4092 : 2007	TERMINOLOGY FOR PLASTICS: DYNAMIC MECHANICAL PROPERTIES
07/30148618 DC : 0	BS ISO 22007-1 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES
DIN EN ISO 22007-6 E : 2015	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014)
DIN EN ISO 21003-1 : 2008	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
DIN EN ISO 22007-3 E : 2012	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD (ISO 22007-3:2008)
07/30169818 DC : 0	BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 16245-2 E : 2013	FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
DIN EN 16240 : 2014	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS ISO 17221 : 2014	PLASTICS - DETERMINATION OF IMAGE CLARITY (DEGREE OF SHARPNESS OF REFLECTED OR TRANSMITTED IMAGE)
BS EN 1519-1 : 2000	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
BS ISO 15040 : 1999	COMPOSITES - PREPREGS - DETERMINATION OF GEL TIME
BS EN ISO 16396-2 : 2017	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
DIN EN ISO 22007-3 : 2012	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD (ISO 22007-3:2008)
17/30341503 DC : DRAFT APR 2017	BS ISO 15033 - PLASTICS - DETERMINATION OF CAPROLACTAM AND ITS CYCLIC AND LINEAR OLIGOMERS BY HPLC
DIN EN ISO 10927 E : 2011	PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
DIN EN ISO 11357-6 E : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008)
UNE EN ISO 15494 : 2016	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
BS EN ISO 3451-1 : 1997	PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
UNE EN ISO 16396-1 : 2015	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
17/30363924 DC : 0	BS EN 17176-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL
ISO 18437-6 : 2017	MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 6: TIME-TEMPERATURE SUPERPOSITION
ISO 178 : 2010(R2015)	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
DIN EN ISO 22007-2 E : 2015	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO 22007-2:2015)
SR CEN/TR 16953:2017	MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION
UNI EN ISO 1183-1 : 2013	PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD
CEI EN 60454-1 : 1997	SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS
ONORM EN ISO 11357-6 : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008)
PREN ISO 6721-1 : DRAFT 2011	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
DIN EN 15870 : 2009	ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
BS EN ISO 22007-3 : 2012	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD (ISO 22007-3:2008)
UNE EN ISO 11357-6 : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008)
DIN EN ISO 11357-4 : 2014	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
DIN EN ISO 22007-6 : 2015	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014)
UNI EN ISO 22007-3 : 2012	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD
UNI EN ISO 8062-1 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY
ASTM F 2576 : 2015-09	TERMINOLOGY RELATING TO DECLARABLE SUBSTANCES IN MATERIALS
PREN 1401-1 : DRAFT 2018	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS
UNI EN ISO 11357-3 : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
ISO 17088 : 2012	SPECIFICATIONS FOR COMPOSTABLE PLASTICS
03/105582 DC : DRAFT APR 2003	ISO 11357-4 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY
ISO 23559 : 2007	PLASTICS - FILM AND SHEETING - GUIDANCE ON THE TESTING OF THERMOPLASTIC FILMS
06/30152065 DC : DRAFT JUNE 2006	BS EN ISO 6401 - PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER - GAS CHROMATOGRAPHIC METHOD
13/30212494 DC : 0	BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES
BS EN ISO 25762 : 2012	PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
DD ENV 61112 : 2002	BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
BS ISO 17771 : 2003	PLASTICS - THERMOSET MOULDING COMPOUNDS - DETERMINATION OF THE DEGREE OF FIBRE WETTING IN SMC
09/30206298 DC : 0	BS EN 16011 - PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
03/306100 DC : DRAFT APR 2003	ISO 18437-3 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 3: SINGLE CANTILEVER BEAM METHOD
12/30254691 DC : DRAFT MAR 2012	BS ISO 16525-7 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 7: ENVIRONMENTAL TEST METHODS
13/30276234 DC : 0	BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
06/30134637 DC : DRAFT FEB 2006	ISO 22007-3 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD
BS 2782-3.345A(1993) : 1993 AMD 8637	METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF COMPRESSIVE PROPERTIES
DIN EN ISO 8257-1 E : 2006	PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
BS EN ISO 11357-7 : 2015	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS
DIN EN 13245-3 : 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
NBR ISO 16486-1 : 2013	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL
ISO 17467-1 : 2012	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL
DIN EN ISO 15750-3 E : 2008	PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS
10/30212144 DC : 0	BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
08/30175867 DC : DRAFT JAN 2008	BS EN 61111 - LIVE WORKING - ELECTRICAL INSULATING MATTING
DIN EN ISO 178 E : 2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013)
BS ISO 30021 : 2013	PLASTICS - BURNING BEHAVIOUR - INTERMEDIATE-SCALE FIRE-RESISTANCE TESTING OF FIBRE-REINFORCED POLYMER COMPOSITES
BS PD CEN ISO/TS 80004-6 : 2015	NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION
13/30277400 DC : 0	BS EN 131-6 - LADDERS - PART 6: TELESCOPIC LADDERS
UNE CEN/TS 16011 : 2015	PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
17/30364341 DC : 0	BS EN 1519-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
PREN 1451-1 : DRAFT 2016	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN 1519-1:1999	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
06/30130313 DC : DRAFT MAR 2006	ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS
BS ISO 16365-2 : 2014	PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30248330 DC : 0	BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL
UNI EN 15344 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
BS EN ISO 11358-1 : 2014	PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES
BS EN 61111 : 2010	LIVE WORKING - ELECTRICAL INSULATING MATTING
ISO 21004 : 2006(R2015)	PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY
BS PD ISO/TR 18196 : 2016	NANOTECHNOLOGIES - MEASUREMENT TECHNIQUE MATRIX FOR THE CHARACTERIZATION OF NANO-OBJECTS
CSA Z13329 : 2015	NANOMATERIALS - PREPARATION OF SAFETY DATA SHEETS (SDSS)
BS ISO 6721-10 : 2015	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 10: COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER
BS ISO 16620-1 : 2015	PLASTICS - BIOBASED CONTENT - PART 1: GENERAL PRINCIPLES
BS EN ISO 22007-6 : 2015	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE
18/30363850 DC : DRAFT APR 2018	BS EN ISO 3451-1 - PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
15/30327642 DC : 0	BS EN 13476-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
ASTM D 1972 : 1997 : R2005	Standard Practice for Generic Marking of Plastic Products (Withdrawn 2014)
BS PD CEN/TR 15438 : 2007	PLASTICS PIPING SYSTEMS - GUIDANCE FOR CODING OF PRODUCTS AND THEIR INTENDED USES
BS ISO 24538 : 2008	PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER BY GAS-CHROMATOGRAPHIC ANALYSIS OF DRY POWDER
BS EN ISO 178 : 2010	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
DIN EN ISO 16396-1 : 2015	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
DIN EN ISO 11358-1 E : 2014	PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
BS PD CEN/TS 16011 : 2013	PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
12/30255878 DC : 0	BS ISO 17885 - PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS
BS ISO 21067-1 : 2016	PACKAGING - VOCABULARY - PART 1: GENERAL TERMS
05/30130524 DC : DRAFT MAR 2005	ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL
NBR 14760 : 2001	NON ACTIVE SURGICAL - BODY CONTOURING IMPLANTS - SPECIFIC REQUIREMENTS FOR MAMMARY IMPLANTS
DIN EN ISO 10927 : 2011	PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
11/30242926 DC : DRAFT MAY 2011	BS ISO 12000 - PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS
SAE AMS 2980/1 : 2014	CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS
DIN EN ISO 11357-7 : 2015	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 11357-7:2015)
DIN EN ISO 1452-1 E : 2010	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
11/30246452 DC : 0	BS EN 14758-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-MD) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
ISO 22621-1 : 2007	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURES UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL
08/30191997 DC : 0	BS ISO 1043-1 - PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS
PREN ISO 14910-1 : DRAFT 2010	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
DIN EN ISO 16014-5 : 2012	PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012)
03/105580 DC : DRAFT APR 2003	ISO 20965 - PLASTICS - DETERMINATION OF THE TRANSIENT EXTENSIONAL VISCOSITY OF POLYMER MELTS
BS EN 60903 : 2003	LIVE WORKING - GLOVES OF INSULATING MATERIAL
BS 3396-1(1991) : 1991	WOVEN GLASS FIBRE FABRICS FOR PLASTICS REINFORCEMENT - SPECIFICATION FOR LOOM-STATE FABRICS
DIN EN ISO 22391-1 E : 2010	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
UNI EN ISO 21003-1 : 2009	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
17/30348286 DC : 0	BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
DIN EN ISO 12086-1 : 2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
04/30091874 DC : DRAFT FEB 2004	BS EN ISO 13000-1 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 1: REQUIREMENTS AND DESIGNATION
BS EN 13245-2 : 2008	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
BS ISO 17467-1 : 2012	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL
I.S. EN ISO 20568-1:2017&LC:2017	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017)
PREN 17176-1 : DRAFT 2017	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE GROUND DRAINAGE, SEWERAGE AND IRRIGATION UNDER PRESSURE - ORIENTED UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-O) - PART 1: GENERAL
ISO 4901 : 2011(R2016)	REINFORCED PLASTICS BASED ON UNSATURATED-POLYESTER RESINS - DETERMINATION OF THE RESIDUAL STYRENE MONOMER CONTENT, AS WELL AS THE CONTENT OF OTHER VOLATILE AROMATIC HYDROCARBONS, BY GAS CHROMATOGRAPHY
10/30215996 DC : 0	BS EN 61212-3-1 - INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: ROUND LAMINATED ROLLED TUBES
BS ISO 18437-5 : 2011	MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 5: POISSON RATIO BASED ON COMPARISON BETWEEN MEASUREMENTS AND FINITE ELEMENT ANALYSIS
BS EN ISO 15876-1 : 2017	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 1: GENERAL (ISO 15876 1:2017)
I.S. EN ISO 1452-1:2009	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
BS ISO 19929 : 2017	PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MIXTURE RATIO OF POLY(ETHYLENE GLYCOL) AND ITS DERIVATIVES BY MALDI-TOF-MS
16/30298887 DC : 0	BS ISO 21930 - SUSTAINABILITY IN BUILDINGS AND CIVIL ENGINEERING WORKS - ENVIRONMENTAL DECLARATION OF BUILDING PRODUCTS
DD CEN/TS 14758-2 : 2007	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIER(S) (PP-MD) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
DIN EN 1013 : 2015	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 1329-1:2014	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN ISO 11357-7 E : 2015	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 113577:2015)
09/30194950 DC : 0	BS ISO 11337 - PLASTICS - POLYAMIDES - DETERMINATION OF E-CAPROLACTAM AND W-LAUROLACTAM BY GAS CHROMATOGRAPHY
06/30151164 DC : 0	BS EN ISO 15877-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL
PREN ISO 15494 : DRAFT 2013	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013)
BS EN ISO 1452-1 : 2009	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
DIN EN ISO 15750-3 : 2008	PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS
BS ISO 16525-1 : 2014	ADHESIVES - TEST METHODS FOR ISOTROPIC ELECTRICALLY CONDUCTIVE ADHESIVES - PART 1: GENERAL TEST METHODS
08/30177314 DC : DRAFT JAN 2008	BS ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
DIN EN ISO 25762 E : 2012	PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009)
07/30147100 DC : 0	ISO 18437-4 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 4: DYNAMIC STIFFNESS METHOD
BS EN ISO 1133-2 : 2011	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011)
17/30357747 DC : DRAFT AUG 2017	BS EN ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
BS EN ISO 22007-2 : 2015	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD
ISO 12817 : 2013(R2018)	FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF OPEN-HOLE COMPRESSION STRENGTH
BS ISO 7198 : 1998	CARDIOVASCULAR IMPLANTS - TUBULAR VASCULAR PROSTHESES
CEI EN 61112 : 2010	LIVE WORKING - ELECTRICAL INSULATING BLANKETS
BS EN 16240 : 2013	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS ISO 25762 : 2009	PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
UNI EN 15343 : 2008	PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT
DIN EN ISO 306 : 2014	PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013)
02/121892 DC : DRAFT APR 2002	PREN 14447 - FIBRE REINFORCED PLASTICS - GLASS MAT REINFORCED THERMOPLASTICS (GMT) - DETERMINATION OF FLOWABILITY AND SOLIDIFICATION
00/565107 DC : DRAFT NOV 2000	BS EN 14052 - SPECIFICATION FOR HIGH PERFORMANCE INDUSTRIAL SAFETY HELMETS
07/30171973 DC : 0	BS EN ISO 6721-12 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 12: COMPRESSIVE VIBRATION - NON-RESONANCE METHOD
DIN EN 60454-1 : 1997	SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS
BS ISO 16525-7 : 2014	ADHESIVES - TEST METHODS FOR ISOTROPIC ELECTRICALLY CONDUCTIVE ADHESIVES - PART 7: ENVIRONMENTAL TEST METHODS
I.S. EN ISO 11357-7:2015	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 11357-7:2015)
17/30350548 DC : 0	BS EN ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
I.S. EN 15534-1:2014	COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
DIN EN ISO 3451-1 E : 2008	PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
BS ISO 4427-1 : 2007	PLASTICS PIPING SYSTEMS - POLYETHYLENE (PE) PIPES AND FITTINGS FOR WATER SUPPLY - PART 1: GENERAL
DIN EN ISO 1183-1 E : 2013	PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
BS ISO 30012 : 2016	CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF THE SIZE AND ASPECT RATIO OF CRUSHED OBJECTS
BS ISO 18437-4 : 2008	MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 4: DYNAMIC STIFFNESS METHOD
UNE EN ISO 20568-2 : 2017	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
99/201503 DC : 0	IEC 61479 ED.1 - LIVE WORKING - CONDUCTOR COVERS (LINE HOSES) OR INSULATING MATERIAL FOR ELECTRICAL PURPOSES
DIN EN ISO 20568-1 E : 2017	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017)
16/30336081 DC : 0	BS EN ISO 16664 - GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES
08/30182090 DC : DRAFT MAY 2008	BS EN ISO 11357-1 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 1: GENERAL PRINCIPLES
13/30259881 DC : 0	BS ISO 22007-6 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE
SAE AMS 3970/1 : 2011	CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 1 - GENERAL REQUIREMENTS
UNI EN 15422 : 2008	PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASS-FIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES
15/30302735 DC : 0	BS EN ISO 11469 - PLASTICS - GENERIC IDENTIFICATION AND MARKING OF PLASTICS PRODUCTS
PREN 131-6 : DRAFT 2017	LADDERS - PART 6: TELESCOPIC LADDERS
BS EN 13245-3 : 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
03/305847 DC : DRAFT APR 2003	ISO 18437-2 - MECHANICAL VIBRATION AND SHOCK - CHARACTERISATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 2: RESONANCE METHOD
14/30304003 DC : 0	BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
BS EN 15345 : 2007	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
UNE EN ISO 11357-4 : 2014	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
04/30095069 DC : 0	BS EN 443 - FIREFIGHTERS HELMETS
BS ISO 1268-1 : 2001	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCTION TEST PLATES - PART 1: GENERAL CONDITIONS
08/30170590 DC : DRAFT JULY 2008	BS EN ISO 12543-1 - GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PART 1: DEFINITIONS AND DESCRIPTION OF COMPONENT PARTS
08/30193485 DC : 0	BS ISO 17212 - STRUCTURAL ADHESIVES- GUIDELINES FOR THE SURFACE PREPARATION OF METALS AND PLASTICS PRIOR TO ADHESIVE BONDING
BS EN 15870 : 2009	ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
BS 3558-1(1997) : 1997	GLOSSARY OF RUBBER TERMS - INTERNATIONAL TERMS
17/30333280 DC : 0	BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
14/30295044 DC : 0	BS ISO 19095-3 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 3: TEST METHODS
14/30283167 DC : 0	BS ISO 18263-2 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMENR PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
07/30161754 DC : 0	BS ISO 15270 - PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE
11/30211349 DC : 0	BS ISO 13636 - PLASTICS - FILM AND SHEETING - NON-ORIENTED POLY(ETHYLENE TEREPHTHALATE) (PET) SHEETS
04/30091878 DC : DRAFT FEB 2004	BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS PD ISO/TR 13014 : 2012	NANOTECHNOLOGIES - GUIDANCE ON PHYSICO-CHEMICAL CHARACTERIZATION OF ENGINEERED NANOSCALE MATERIALS FOR TOXICOLOGIC ASSESSMENT
12/30266170 DC : 0	BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
PREN 17098-2 : DRAFT 2017	PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
11/30239977 DC : 0	BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
07/30175034 DC : DRAFT DEC 2007	BS ISO 18352 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT ENERGY LEVEL
BS ISO 4901 : 2011	REINFORCED PLASTICS BASED ON UNSATURATED-POLYESTER RESINS - DETERMINATION OF THE RESIDUAL STYRENE MONOMER CONTENT, AS WELL AS THE CONTENT OF OTHER VOLATILE AROMATIC HYDROCARBONS, BY GAS CHROMATOGRAPHY
DIN EN ISO 25762 : 2012	PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009)
11/30240161 DC : 0	BS ISO 18606 - PACKAGING AND THE ENVIRONMENT - ORGANIC RECYCLING
DIN EN ISO 877-1 : 2016	PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
BS ISO 8516 : 2011	TEXTILE GLASS - TEXTURED YARNS - BASIS FOR A SPECIFICATION
16/30336859 DC : 0	BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
PREN 1519-1 : DRAFT 2017	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYETHYLENE (PE) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN 15701 E : 2017	PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
NF ISO 11357-3 : 2011	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
ISO 18263-2 : 2015	PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMER PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 15870 E : 2009	ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
DIN EN ISO 11357-4 E : 2014	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
BS EN 17098-2 : 2018	PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
BS 7297-2(1990) : 1990	HAEMODIALYSERS AND RELATED EQUIPMENT - SPECIFICATION FOR EXTRACORPOREAL CIRCUITS FOR USE WITH HAEMODIALYSERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
DIN EN ISO 6721-1 E : 2011	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 6721-1:2011)
05/30130982 DC : DRAFT MAR 2005	ISO 15033 - PLASTICS - DETERMINATION OF CAPROLACTAM AND ITS CYCLIC AND LINEAR OLIGOMERS BY HPLC
16/30314675 DC : 0	BS ISO 19469-1 - PLASTIC PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE - SINGLE WALL CORRUGATED PIPING SYSTEMS OF POLYETHYLENE (PE), POLYPROPYLENE (PP) AND UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
NF EN ISO 22391-1 : 2010	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
ONORM EN ISO 1183-1 : 2013	PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
UNE EN 15346 : 2015	PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
BS ISO 16525-6 : 2014	ADHESIVES - TEST METHODS FOR ISOTROPIC ELECTRICALLY CONDUCTIVE ADHESIVES - PART 6: DETERMINATION OF PENDULUM-TYPE SHEAR IMPACT
10/30196247 DC : 0	BS ISO 12418-2 - PLASTICS - POST-CONSUMER POLY(ETHYLENE TEREPHTHALATE) (PET) BOTTLE REYCLATES - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11357-3 E : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011)
BS ISO 12817 : 2013	FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF OPEN-HOLE COMPRESSION STRENGTH
08/30154274 DC : DRAFT MAR 2008	BS ISO 25762 - PLASTICS - GUIDANCE ON THE ASSESSMENT OF FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED COMPOSITES
BS ISO 13636 : 2012	PLASTICS - FILM AND SHEETING - NON-ORIENTED POLY(ETHYLENE TEREPHTHALATE) (PET) SHEETS
BS ISO 16365-1 : 2014	PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
18/30367544 DC : DRAFT APR 2018	BS ISO 21257 - PLASTICS - POLYMER POLYOLS FOR USE IN THE PRODUCTION OF POLYURETHANE - DETERMINATION OF THE RESIDUAL ACRYLONITRILE AND STYRENE MONOMER CONTENT BY GAS CHROMATOGRAPHY
BS EN ISO 8257-1 : 2006	PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
BS EN 16245-2 : 2013	FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
BS EN ISO 22007-1 : 2017	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES (ISO 22007-1:2017)
BS ISO 12000 : 2014	PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS
BS EN ISO 11357-3 : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011)
04/30091867 DC : DRAFT FEB 2004	BS EN ISO 12086-1 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
BS EN 15857 : 2010	NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
16/30330542 DC : 0	BS EN ISO 22007-1 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES
14/30268127 DC : 0	BS EN ISO 11357-7 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS
BS ISO 22007-6 : 2014	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE
DIN EN ISO 11357-3 : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011)
BS EN 1013 : 2012	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 306 E : 2014	PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO 306:2013)
NF EN ISO 1452-1 : 2010	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
DIN EN ISO 22007-2 : 2015	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO 22007-2:2015)
BS EN 16575 : 2014	BIO-BASED PRODUCTS - VOCABULARY
DIN EN 16245-2 : 2013	FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
BS ISO 3598 : 2011	TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION
BS PD CEN/TS 16861 : 2015	PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET)
12/30254697 DC : 0	BS ISO 16525-9 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 9: DETERMINATION OF HIGH-SPEED SIGNAL-TRANSMISSION CHARACTERISTICS
10/30216000 DC : 0	BS EN 61212-3-2 - INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: ROUND LAMINATED MOULDED TUBES
17/30330561 DC : DRAFT MAY 2017	BS ISO 20819 - PLASTICS - WOOD-PLASTIC RECYCLED COMPOSITES (WPRC) - SPECIFICATION
BS ISO 2797 : 2017	TEXTILE GLASS - ROVINGS - BASIS FOR A SPECIFICATION
17/30361211 DC : 0	BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING
12/30258011 DC : 0	BS ISO 11359-1 - PLASTICS - THERMOMECHANICAL ANALYSIS (TMA) - PART 1: GENERAL PRINCIPLES
BS ISO 17422 : 2002	PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
12/30258334 DC : 0	BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
09/30209028 DC : 0	BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
BS PD ISO/TS 80004-6 : 2013	NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION
BS ISO 23559 : 2011	PLASTICS - FILM AND SHEETING - GUIDANCE ON THE TESTING OF THERMOPLASTIC FILMS
SR CEN ISO/TR 22007-5:2014	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 5: RESULTS OF INTERLABORATORY TESTING OF POLY(METHYL METHACRYLATE) SAMPLES (ISO/TR 22007-5:2011)
NBR ISO 15605 : 2015	ADHESIVES - SAMPLING
17/30371286 DC : 0	BS EN 4866 - AEROSPACE SERIES - DEFINITIONS OF IMPERFECTIONS AND DEFECTS IN ORGANIC MATRIX COMPOSITE MATERIALS
BS ISO 11357-4 : 2005	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY
ISO 12013-2 : 2012(R2018)	PAINTS AND VARNISHES - DETERMINATION OF CURING CHARACTERISTICS USING A FREE DAMPED OSCILLATION METHOD - PART 2: GLASS TRANSITION TEMPERATURE
IEC 62899-201 : 1ED 2016	PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
05/30111233 DC : 0	BS EN 13245-2 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
ISO 15034 : 1999(R2014)	COMPOSITES - PREPREGS - DETERMINATION OF RESIN FLOW
DIN EN 16575 : 2014	BIO-BASED PRODUCTS - VOCABULARY
BS EN 15534-1 : 2014	COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
16/30344242 DC : 0	BS EN ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
CEI EN 62011-1 : 2003	INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION BASED UPON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS
DIN EN ISO 877-1 E : 2011	PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
BS ISO 16525-8 : 2014	ADHESIVES - TEST METHODS FOR ISOTROPIC ELECTRICALLY CONDUCTIVE ADHESIVES - PART 8: ELECTROCHEMICAL-MIGRATION TEST METHODS
BS ISO 1172 : 96 AMD 10350	TEXTILE-GLASS-REINFORCED PLASTICS - PREPREGS, MOULDING COMPOUNDS AND LAMINATES - DETERMINATION OF THE TEXTILE-GLASS AND MINERAL-FILLER CONTENT - CALCINATION METHODS
DIN EN 16153 E : 2015	LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
13/30276237 DC : 0	BS EN 15348 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
11/30196210 DC : 0	BS ISO 12815 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH
BS ISO 18437-1 : 2012	MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 1: PRINCIPLES AND GUIDELINES
17/30348289 DC : 0	BS EN 17098-2 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
BS EN ISO 20568-1 : 2017	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017)
DIN EN ISO 11358-1 : 2014	PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
BS ISO 11359-3 : 2002	PLASTICS - THERMOMECHANICAL ANALYSIS (TMA) - PART 3: DETERMINATION OF PENETRATION TEMPERATURE
BS ISO 9163 : 1996 AMD 10351	TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS
ISO 13895 : 1996	ADHESIVES - GUIDELINES FOR THE SURFACE PREPARATION OF PLASTICS
15/30321222 DC : 0	BS EN ISO 20568-1 - PLASTICS - FLUOROPOLYMER DISPERSION AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
UNI EN ISO 1452-1 : 2010	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
BS 7746(1994) : 1994	GENERIC IDENTIFICATION AND MARKING OF PLASTICS PRODUCTS
15/30321226 DC : 0	BS EN ISO 20568-2 - PLASTICS - FLUOROPOLYMER DISPERSION AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 15345 E : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
BS EN 50237 : 2000	GLOVES AND MITTS WITH MECHANICAL PROTECTION FOR ELECTRICAL PURPOSES
DIN EN 13245-2 : 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
ASTM D 5947 : 2012-01	TEST METHODS FOR PHYSICAL DIMENSIONS OF SOLID PLASTICS SPECIMENS
UNE EN ISO 11357-7 : 2016	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 7: DETERMINATION OF CRYSTALLIZATION KINETICS (ISO 11357-7:2015)
08/30185535 DC : DRAFT JULY 2008	BS EN ISO 1452-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 1: GENERAL
DIN EN ISO 16664 E : 2017	GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017)
UNE EN 15348 : 2015	PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
UNI EN 15347 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
07/30155372 DC : 0	BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
BS PD CEN/TR 16953 : 2017	MEDICAL GLOVES FOR SINGLE USE - GUIDANCE FOR SELECTION
09/30183439 DC : 0	BS EN ISO 1133-2 - PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE
BS ISO 21340 : 2017	TEST METHODS FOR FIBROUS ACTIVATED CARBON
BS EN 61112 : 2009	LIVE WORKING - ELECTRICAL INSULATING BLANKETS
DIN EN 16575 E : 2014	BIO-BASED PRODUCTS - VOCABULARY
13/30240167 DC : 0	BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 2561 : 2012	PLASTICS - DETERMINATION OF RESIDUAL STYRENE MONOMER IN POLYSTYRENE (PS) AND IMPACT-RESISTANT POLYSTYRENE (PS-I) BY GAS CHROMATOGRAPHY
14/30273496 DC : 0	BS ISO 21067 - PACKAGING - VOCABULARY
16/30321526 DC : 0	BS ISO 19935-1 - PLASTICS - TEMPERATURE MODULATED DSC - PART 1: GENERAL PRINCIPLES
BS ISO 19212 : 2006	ADHESIVES - DETERMINATION OF TEMPERATURE DEPENDENCE OF SHEAR STRENGTH
ISO 30021 : 2013(R2019)	PLASTICS - BURNING BEHAVIOUR - INTERMEDIATE-SCALE FIRE-RESISTANCE TESTING OF FIBRE-REINFORCED POLYMER COMPOSITES
14/30311109 DC : 0	BS EN 1453-1 - PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
NF ISO 15270 : 2009	PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE
BS EN ISO 22391-1 : 2009	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
ONORM EN ISO 15877-1 : 2011	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL
DIN EN ISO 3451-1 : 2008	PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
BS ISO 11667 : 1997 AMD 10676	FIBRE REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCEMENT-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS
08/30188330 DC : DRAFT AUG 2008	BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
DIN EN ISO 11357-6 : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2008)
DIN EN 13245-2 E : 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
DIN EN 15348 E : 2015	PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
DIN EN ISO 8257-1 : 2006	PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
ISO 24538 : 2008(R2016)	PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER BY GAS-CHROMATOGRAPHIC ANALYSIS OF DRY POWDER
BS EN ISO 15750-3 : 2008	PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS
00/203243 DC : 0	IEC 60743. ED. 2 - LIVE WORKING - TERMINOLOGY FOR TOOLS, EQUIPMENT AND DEVICES
DIN EN ISO 21003-1 E : 2008	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
I.S. EN 16153:2013	LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS IEC 61942 : 1997	LIVE WORKING - GLOVES AND MITTS WITH MECHANICAL PROTECTION
UNE ISO 1268-1 : 2012	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 1: GENERAL CONDITIONS
UNE-EN 15857:2010	NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
UNE EN ISO 11357-2 : 2015	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
18/30344274 DC : DRAFT APR 2018	BS ISO 21475 - PLASTICS - METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION
BS EN ISO 21003-1 : 2008	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
17/30350551 DC : 0	BS EN ISO 10927 - PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
BS 7297-1(1990) : 1990	HAEMODIALYSERS AND RELATED EQUIPMENT - SPECIFICATION FOR HAEMODIALYSERS, HAEMOFILTERS AND HAEMOCONCENTRATORS
12/30254694 DC : DRAFT MAR 2012	BS ISO 16525-8 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 8: ELECTROCHEMICAL-MIGRATION TEST METHODS
01/102261 DC : DRAFT FEB 2001	BS EN ISO 10318 - GEOSYNTHETICS - GEOTEXTILES, GEOTEXTILE-RELATED PRODUCTS, GEOMEMBRANES AND GEOSYNTHETIC CLAY LINERS - TERMS AND THEIR DEFINITIONS
ASTM D 1972 : 1997	PRACTICE FOR GENERIC MARKING OF PLASTIC PRODUCTS
BS ISO 12815 : 2013	FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH
UNI EN ISO 11358-1 : 2014	PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES
BS EN 60464-1 : 1999	VARNISHES USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
08/30194094 DC : 0	BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
DIN EN ISO 12086-2 : 2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
12/30252886 DC : 0	BS ISO 10364 - STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES
BS ISO 16014-2 : 2012	PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 2: UNIVERSAL CALIBRATION METHOD
DIN EN 15701 : 2015	PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
BS EN ISO 4007 : 2012	PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY (ISO 4007:2012)
BS ISO 20819 : 2018	PLASTICS - WOOD-PLASTIC RECYCLED COMPOSITES (WPRC) - SPECIFICATION
08/30175871 DC : DRAFT JAN 2008	BS EN 61112 - LIVE WORKING - ELECTRICAL INSULATING BLANKETS
DIN EN 15857 : 2010	NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
BS EN 15422 : 2008	PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES
16/30332879 DC : 0	BS EN 1451-1 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
98/123516 DC : DRAFT JULY 1998	PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS
ISO 12000 : 2014	PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATTICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS
DIN EN ISO 20568-2 E : 2017	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
ASTM D 1972 : 1997 : R2001	Standard Practice for Generic Marking of Plastic Products
14/30275072 DC : 0	BS ISO 17902 - WRAPPED ELECTROFOAMING JOINTS FOR PE PIPING SYSTEMS WITH SMOOTH OUTER WALL FOR GRAVITY DRAINS AND SEWERS
BS ISO 20965 : 2005	PLASTICS - DETERMINATION OF THE TRANSIENT EXTENSIONAL VISCOSITY OF POLYMER MELTS
UNE EN ISO 16014-5 : 2013	PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012)
04/30122909 DC : DRAFT SEP 2004	ISO 19212 - ADHESIVES - DETERMINATION OF TEMPERATURE DEPENDENCE OF SHEAR STRENGTH
I.S. EN ISO 8257-1:2006	PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
I.S. EN ISO 4007:2012	PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY (ISO 4007:2012)
BS ISO 13106 : 2014	PLASTICS - BLOW-MOULDED POLYPROPYLENE CONTAINERS FOR PACKAGING OF LIQUID FOODSTUFFS
PREN ISO 15874-1 : DRAFT 2010	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL
BS ISO 8605 : 2001	TEXTILE-GLASS-REINFORCED PLASTICS - SHEET MOULDING COMPOUND (SMC) - BASIS FOR SPECIFICATION
SR CEN ISO/TR 27165:2012	THERMOPLASTICS PIPING SYSTEMS - GUIDANCE FOR DEFINITIONS OF WALL CONSTRUCTIONS FOR PIPES (ISO/TR 27165:2012)
BS PD CEN ISO/TR 27165 : 2012	THERMOPLASTICS PIPING SYSTEMS - GUIDANCE FOR DEFINITIONS OF WALL CONSTRUCTIONS FOR PIPES
DIN EN ISO 20568-1 : 2015	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 20568-1:2017)
NF EN 61479 : 2001 AMD 1 2003	LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
00/105249 DC : DRAFT JULY 2000	PREN 13956 - FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS
NF EN 60455-1 : 1999	RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - DEFINITIONS AND GENERAL REQUIREMENTS
ISO/DIS 16014-3 : 40.20 (2018)	PLASTICS - DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 3: LOW-TEMPERATURE METHOD
12/30254682 DC : DRAFT MAR 2012	BS ISO 16525-4 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 4: DETERMINATION OF SHEAR STRENGTH AND ELECTRICAL RESISTANCE USING RIGID-TO-RIGID BONDED ASSEMBLIES
17/30350545 DC : 0	BS EN ISO 11357-3 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
DIN EN 15348 : 2015	PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
DIN EN ISO 12086-1 E : 2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
NBR 16295 : 2014	GLOVES OF INSULATING MATERIAL
12/30256736 DC : 0	BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
BS EN 62011-1 : 2002	INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS
BS ISO 19095-4 : 2015	PLASTICS - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 4: ENVIRONMENTAL CONDITIONS FOR DURABILITY
BS EN 15348 : 2014	PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
BS ISO 18263-2 : 2015	PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMER PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
05/30141301 DC : DRAFT NOV 2005	ISO 20393 - RIGID CELLULAR PLASTICS - DETERMINATION OF LONG-TERM WATER ABSORPTION BY DIFFUSION
NBR 15708-5 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPES - PART 5: STRUCTURAL SHAPES
BS EN ISO 11357-4 : 2014	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY
BS ISO 17885 : 2015	PLASTICS PIPING SYSTEMS - MECHANICAL FITTINGS FOR PRESSURE PIPING SYSTEMS - SPECIFICATIONS
10/30211408 DC : 0	BS ISO 2561 - PLASTICS - DETERMINATION OF RESIDUAL STYRENE MONOMER IN POLYSTYRENE (PS) AND IMPACT-RESISTANT POLYSTYRENE (PS-I) BY GAS CHROMATOGRAPHY
BS ISO 16014-1 : 2012	PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 1: GENERAL PRINCIPLES
BS ISO 16525-2 : 2014	ADHESIVES - TEST METHODS FOR ISOTROPIC ELECTRICALLY CONDUCTIVE ADHESIVES - PART 2: DETERMINATION OF ELECTRICAL CHARACTERISTICS FOR USE IN ELECTRONIC ASSEMBLIES
ISO 20965 : 2005(R2013)	PLASTICS - DETERMINATION OF THE TRANSIENT EXTENSIONAL VISCOSITY OF POLYMER MELTS
14/30295038 DC : 0	BS ISO 19095-1 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 1: GUIDELINES FOR THE APPROACH
BS PD CEN/TS 16010 : 2013	PLASTICS - RECYCLED PLASTICS - SAMPLING PROCEDURES FOR TESTING PLASTICS WASTE AND RECYCLATES
12/30254685 DC : DRAFT MAR 2012	BS ISO 16525-5 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 5: SHEAR FATIGUE TESTING
BS ISO 16525-5 : 2014	ADHESIVES - TEST METHODS FOR ISOTROPIC ELECTRICALLY CONDUCTIVE ADHESIVES - PART 5: DETERMINATION OF SHEAR FATIGUE
17/30355108 DC : 0	BS ISO 6237 - ADHESIVES - WOOD-TO-WOOD ADHESIVE BONDS - DETERMINATION OF SHEAR STRENGTH BY TENSILE LOADING
BS 7281(1990) : 1990	SPECIFICATION FOR POLYETHYLENE PIPES FOR THE SUPPLY OF GASEOUS FUELS
PREN 1329-1 : DRAFT 2013	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
UNI EN ISO 877-1 : 2011	PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
PREN ISO 1874-1 : DRAFT 2008	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION
DIN ISO 16486-1 : 2015	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL (ISO 16486-1:2012 + AMD 1:2014)
10/30192393 DC : 0	BS ISO 4901 - REINFORCED PLASTICS BASED ON UNSATURATED POLYESTER RESINS - DETERMINATION OF RESIDUAL STYRENE MONOMER CONTENT AS WELL AS THE CONTENT OF OTHER VOLATILE AROMATIC HYDROCARBONS, BY GAS CHROMATOGRAPHY
BS ISO 14127 : 2008	CARBON-FIBRE-REINFORCED COMPOSITES - DETERMINATION OF THE RESIN, FIBRE AND VOID CONTENTS
BS ISO 6707-3 : 2017	BUILDINGS AND CIVIL ENGINEERING WORKS - VOCABULARY - PART 3: SUSTAINABILITY TERMS
DIN EN 15422 : 2008	PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES
BS ISO 15166-1 : 1998	ADHESIVES - METHODS OF PREPARING BULK SPECIMENS - TWO-PART SYSTEMS
BS EN ISO 16664 : 2017	GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES
BS ISO 16664 : 2004	GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES
15/30315534 DC : 0	BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN 55657 : 2016	PAINTS AND VARNISHES - TEST METHOD FOR EVALUATION OF ELASTIC ADHESIVES ON COATINGS BY PEEL TEST, PEEL STRENGTH TEST AND TENSILE LAP-SHEAR STRENGTH TEST WITH ADDITIONAL STRESS BY CONDENSATION TEST OR CATAPLASM STORAGE
ISO 13636 : 2012(R2017)	PLASTICS - FILM AND SHEETING - NON-ORIENTED POLY(ETHYLENE TEREPHTHALATE) (PET) SHEETS
09/30179627 DC : 0	BS ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
DIN EN 15345 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
13/30258014 DC : 0	BS EN ISO 11358-1 - PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO/DIS 11358-1:2013)
DIN EN 16240 E : 2014	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 60455-1 : 1998	RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
NF EN ISO 1043-1 : 2012 AMD 1 2016	PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS
UNE EN ISO 11357-3 : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011)
UNE EN 16153 : 2013	LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
11/30240212 DC : 0	BS EN ISO 8330 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY
UNI EN ISO 3451-1 : 2009	PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
BS ISO 12086-1 : 1995 AMD 10638	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
BS ISO 12013-2 : 2012	PAINTS AND VARNISHES - DETERMINATION OF CURING CHARACTERISTICS USING A FREE DAMPED OSCILLATION METHOD - PART 2: GLASS TRANSITION TEMPERATURE
ISO TR 13014 : 2012	NANOTECHNOLOGIES - GUIDANCE ON PHYSICO-CHEMICAL CHARACTERIZATION OF ENGINEERED NANOSCALE MATERIALS FOR TOXICOLOGIC ASSESSMENT
BS EN ISO 15494 : 2015	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM
ISO 19212 : 2006	ADHESIVES - DETERMINATION OF TEMPERATURE DEPENDENCE OF SHEAR STRENGTH
08/30189974 DC : DRAFT DEC 2008	BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES
ISO 16486-1 : 2012	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL
BS EN ISO 877-1 : 2010	PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE (ISO 877-1:2009)
16/30321523 DC : 0	BS ISO 19929 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MIXTURE RATIO OF POLY (ETHYLENE GLYCOL) AND ITS DERIVATIVES BY MALDI-TOF-MS
18/30370150 DC : DRAFT APR 2018	BS ISO 16014-3 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 3: LOW-TEMPERATURE METHOD
DIN EN ISO 11357-2 E : 2014	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
12/30265045 DC : 0	BS ISO 17221 - PLASTICS - DETERMINATION OF IMAGE CLARITY (DEGREE OF SHARPNESS OF REFLECTED OR TRANSMITTED IMAGE)
BS ISO 18249 : 2015	NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION TESTING - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA FOR TESTING OF FIBRE-REINFORCED POLYMERS
06/30148323 DC : 0	ISO 24538 - PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF RESIDUAL VINYL CHLORIDE MONOMER - GAS-CHROMATOGRAPHIC METHOD ON DRY POWDER
BS PD CEN/TR 16149 : 2011	GUIDANCE DOCUMENT FOR DRAFTING CEN/TC 158 STANDARDS
BS PD CEN ISO/TR 22007-5 : 2014	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 5: RESULTS OF INTERLABORATORY TESTING OF POLY(METHYL METHACRYLATE) SAMPLES (ISO/TR 22007-5:2011)
BS EN ISO 16396-1 : 2015	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS
11/30237779 DC : DRAFT MAR 2011	BS ISO 18437-1 - MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 1: PRINCIPLES AND GUIDELINES
BS ISO 2559 : 2011	TEXTILE GLASS - MATS (MADE FROM CHOPPED OR CONTINUOUS STRANDS) - DESIGNATION AND BASIS FOR SPECIFICATIONS
01/121538 DC : DRAFT APRIL 2001	BS EN ISO 899-1 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP
BS ISO 1268-11 : 2005	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 11: INJECTION MOULDING OF BMC AND OTHER LONG-FIBRE MOULDING COMPOUNDS - SMALL PLATES
BS EN ISO 8062-1 : 2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY
08/30191143 DC : 0	BS EN 1555-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
03/102186 DC : DRAFT AUG 2003	EN 14758-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE WITH MINERAL MODIFIERS (PP-M) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
06/30146370 DC : DRAFT SEP 2006	ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL
09/30191924 DC : 0	BS ISO 16014-5 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: LIGHT-SCATTERING METHOD
BS ISO 10724-1 : 1998 AMD 13328	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - GENERAL PRINCIPLES AND MOULDING OF MULTIPURPOSE TEST SPECIMENS
BS ISO 16525-9 : 2014	ADHESIVES - TEST METHODS FOR ISOTROPIC ELECTRICALLY CONDUCTIVE ADHESIVES - PART 9: DETERMINATION OF HIGH-SPEED SIGNAL-TRANSMISSION CHARACTERISTICS
BS ISO 11357-3 : 1999	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION
BS EN 61479 : 2001	LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
17/30360679 DC : DRAFT SEP 2017	BS EN 17152-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND CONVEYANCE AND STORAGE OF NON-POTABLE WATER - BOXES USED FOR INFILTRATION, ATTENUATION AND STORAGE SYSTEMS - PART 1: SPECIFICATIONS FOR STORM WATER BOXES MADE OF PP AND PVC
09/30184235 DC : 0	BS ISO 10210 - PLASTICS - PREPARATION OF TEST AND REFERENCE MATERIALS FOR BIODEGRADATION TESTING
11/30196213 DC : 0	BS ISO 12817 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF OPENHOLE COMPRESSION STRENGTH
07/30151497 DC : 0	ISO 26842 - ADHESIVES - GUIDELINES FOR THE SELECTION OF ADHESIVES FOR INDOOR WOOD PRODUCTS BY DURABILITY TESTING
10/30211421 DC : 0	BS ISO 3598 - TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION
BS PD ISO/TR 13329 : 2012	NANOMATERIALS - PREPARATION OF MATERIAL SAFETY DATA SHEET (MSDS)
07/30161721 DC : 0	BS ISO 11357-6 - PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
I.S. EN ISO 16396-2:2017	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
13/30257555 DC : 0	BS EN ISO 22007-2 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO/DIS 22007-2:2013)
07/30165577 DC : 0	BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN 13245-3 E : 2010	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
BS ISO 15750-3 : 2002	PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS
BS ISO 11357-6 : 2008	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT)
SR CEN/TS 16861:2015	PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET)
08/30161535 DC : 0	BS EN ISO 1874-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION
12/30240423 DC : 0	BS ISO 16396-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS
12/30237820 DC : 0	BS EN ISO 306 - PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST) (ISO/DIS 306:2012)
BS 5350-C12(1994) : 1994	METHODS OF TEST FOR ADHESIVES - 180 DEGREE PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES (T-PEEL TEST)
DIN EN ISO 12086-2 E : 2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ONORM EN ISO 16014-5 : 2012	PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012)
14/30284280 DC : 0	BS ISO 6721-10 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 10: COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER
BS ISO 12418-2 : 2012	PLASTICS - POST-CONSUMER POLY(ETHYLENE TEREPHTHALATE) (PET) BOTTLE RECYCLATES - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 14127 : 2008(R2016)	CARBON-FIBRE-REINFORCED COMPOSITES - DETERMINATION OF THE RESIN, FIBRE AND VOID CONTENTS
UNE EN ISO 877-1 : 2011	PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
BS ISO 1268-10 : 2005	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 10: INJECTION MOULDING OF BMC AND OTHER LONG-FIBRE MOULDING COMPOUNDS - GENERAL PRINCIPLES AND MOULDING OF MULTIPURPOSE TEST SPECIMENS
NF EN 60464-1 : 1999 AMD 1 2006	VARNISHES USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
07/30127284 DC : 0	BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE
14/30318870 DC : 0	BS PD CEN/TS 16861 - PLASTICS - RECYCLED PLASTICS - DETERMINATION OF SELECTED MARKER COMPOUNDS IN FOOD GRADE RECYCLED POLYETHYLENE TEREPHTHALATE (PET)
BS EN ISO 20568-2 : 2017	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 1268-8 : 2004	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 8: COMPRESSION MOULDING OF SMC AND BMC
15/30324130 DC : 0	BS EN ISO 15876-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 1: GENERAL
NF EN ISO 22007-3 : 2012	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD
10/30228348 DC : 0	BS EN ISO 15874-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 1: GENERAL
BS IEC 61112 : 1992	BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
XP T51 224-1 : 1991 XP	PLASTICS - DETERMINATION OF THE THERMAL STABILITY BY OVER DRYING (FLOATING PLATEN CHAMBER) - PART 1: GENERAL
11/30234454 DC : 0	BS EN ISO 6721-1 - PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
BS ISO 11357-7 : 2002
12/30242496 DC : DRAFT MAR 2012	BS ISO 16525-1 - ADHESIVES - TEST METHODS FOR ISOTROPICALLY ELECTRICALLY CONDUCTING ADHESIVES - PART 1: GENERAL TEST METHODS
08/30170168 DC : DRAFT JULY 2008	BS ISO 22391-1 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
NF ISO 8516 : 2011	TEXTILE GLASS - TEXTURED YARNS - BASIS FOR A SPECIFICATION
I.S. EN ISO 1133-2:2011	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011)
DIN EN 15422 E : 2008	PRECAST CONCRETE PRODUCTS - SPECIFICATION OF GLASSFIBRES FOR REINFORCEMENT OF MORTARS AND CONCRETES
BS ISO 1382 : 2012	RUBBER - VOCABULARY
17/30335677 DC : 0	BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
BS ISO 10724-2 : 1998 AMD 13401	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - SMALL PLATES
UNE EN ISO 1133-2 : 2012	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011)
DIN EN ISO 15876-1 E : 2004	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 1: GENERAL
04/30112206 DC : DRAFT APR 2004	BS ISO 22314 - PLASTICS - GLASS-FIBRE-REINFORCED PRODUCTS - DETERMINATION OF FIBRE LENGTH
UNE EN ISO 11358-1 : 2015	PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
PREN 1453-1 : DRAFT 2014	PLASTICS PIPING SYSTEMS WITH STRUCTURED-WALL PIPES FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES AND THE SYSTEM
10/30196253 DC : 0	BS ISO 14910-1 - PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
UNI EN 13245-2 : 2009	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
11/30238648 DC : DRAFT FEB 2011	BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS ISO 11359-1 : 2014	PLASTICS - THERMOMECHANICAL ANALYSIS (TMA) - PART 1: GENERAL PRINCIPLES
BS ISO 16525-4 : 2014	ADHESIVES - TEST METHODS FOR ISOTROPIC ELECTRICALLY CONDUCTIVE ADHESIVES - PART 4: DETERMINATION OF SHEAR STRENGTH AND ELECTRICAL RESISTANCE USING RIGID-TO-RIGID BONDED ASSEMBLIES
UNI EN 15857 : 2010	NON-DESTRUCTIVE TESTING - ACOUSTIC EMISSION - TESTING OF FIBRE-REINFORCED POLYMERS - SPECIFIC METHODOLOGY AND GENERAL EVALUATION CRITERIA
DIN EN ISO 11357-2 : 2014	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
DIN EN 1013 E : 2015	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS 2782-3.323G(1997) : 1997	METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER
DD CEN/TS 15534-1 : 2007	WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
05/30136084 DC : DRAFT JUL 2005	ISO 12575-3 - THERMAL INSULATION - EXTERIOR INSULATING SYSTEMS FOR FOUNDATIONS - PART 3: TEST METHODS
DIN EN 13476-1 : 2015	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
I.S. EN ISO 11357-2:2014	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT (ISO 11357-2:2013)
01/121388 DC : DRAFT MARCH 2001	ISO 307 PLASTICS - POLYAMIDES - DETERMINATION OF VISCOSITY NUMBER
09/30192408 DC : 0	BS ISO 16014-1 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 1: GENERAL PRINCIPLES
05/30132152 DC : DRAFT APR 2005	ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY
BS ISO 11357-2 : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT
PREN 15346 : DRAFT 2013	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
EN 1329-1 : 2014 + A1 2018	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN 13476-1:2007	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
UNE EN 13245-3 : 2011	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
NF EN ISO 1133-2 : 2012	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE
UNI EN ISO 11357-4 : 2014	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY
NF ISO 3598 : 2011	TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION
BS EN ISO 6721-1 : 2011	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
BS 7544(1991) : 1991	METHOD FOR GRAPHICAL PRESENTATION OF THE COMPLEX MODULUS OF DAMPING MATERIALS
I.S. EN ISO 11357-6:2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 6: DETERMINATION OF OXIDATION INDUCTION TIME (ISOTHERMAL OIT) AND OXIDATION INDUCTION TEMPERATURE (DYNAMIC OIT) (ISO 11357-6:2018)
09/30191988 DC : 0	BS ISO 10927 - DETERMINATION OF MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDITOF-MS)
BS ISO 4437-1 : 2014	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
BS 2782-7.733A(1996) : 1996 AMD 9928	METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF VISCOSITY NUMBER OF POLYAMIDES
BS ISO 22314 : 2006	PLASTICS - GLASS-FIBRE-REINFORCED PRODUCTS - DETERMINATION OF FIBRE LENGTH
UNE ISO 4901 : 2014	REINFORCED PLASTICS BASED ON UNSATURATED-POLYESTER RESINS - DETERMINATION OF THE RESIDUAL STYRENE MONOMER CONTENT, AS WELL AS THE CONTENT OF OTHER VOLATILE AROMATIC HYDROCARBONS, BY GAS CHROMATOGRAPHY
UNE EN ISO 22007-6 : 2015	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 6: COMPARATIVE METHOD FOR LOW THERMAL CONDUCTIVITIES USING A TEMPERATURE-MODULATION TECHNIQUE (ISO 22007-6:2014)
UNE ISO 1268-8 : 2012	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 8: COMPRESSION MOULDING OF SMC AND BMC
ISO 4007 : 2012	PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY
IEC TR 62392 : 1.0	SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL (EIM) FOR POLYMER RECYCLING
PREN ISO 22007-2 : DRAFT 2013	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISC) METHOD (ISO/DIS 22007-2:2013)
I.S. EN ISO 10210:2017	PLASTICS - METHODS FOR THE PREPARATION OF SAMPLES FOR BIODEGRADATION TESTING OF PLASTIC MATERIALS (ISO 10210:2012)
SR CEN ISO/TS 80004-6:2015	NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION (ISO/TS 80004-6:2013)
03/302293 DC : DRAFT APR 2003	EN 14649 - PRECAST CONCRETE PRODUCTS - TEST METHOD FOR STRENGTH RETENTION OF GLASS FIBRES IN CEMENT AND CONCRETE (SIC TEST)
BS ISO 15034 : 2000	COMPOSITES - PREPREGS - DETERMINATION OF RESIN FLOW
UNI EN 16240 : 2014	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
ISO 16525-7 : 2014	ADHESIVES - TEST METHODS FOR ISOTROPIC ELECTRICALLY CONDUCTIVE ADHESIVES - PART 7: ENVIRONMENTAL TEST METHODS
06/30136260 DC : DRAFT MAR 2006	ISO 21138-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1 - MATERIAL AND PERFORMANCE SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEMS
04/30091870 DC : DRAFT FEB 2004	BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
05/19970897 DC : 0	BS ISO 4898 - RIGID CELLULAR PLASTICS - THERMAL INSULATION PRODUCTS FOR BUILDINGS - SPECIFICATIONS
UNI EN 1013 : 2015	LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 15494:2015	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
I.S. EN ISO 1043-1:2011	PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011)
UNI EN ISO 15750-3 : 2008	PACKAGING - STEEL DRUMS - PART 3: INSERTED FLANGE-TYPE CLOSURE SYSTEMS
06/30146747 DC : DRAFT FEB 2006	ISO 22007-2 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 2: TRANSIENT PLANE HEAT SOURCE (HOT DISK) METHOD
09/30192411 DC : 0	BS ISO 16014-2 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 2: UNIVERSAL CALIBRATION METHOD
BS ISO 6237 : 2017	ADHESIVES - WOOD-TO-WOOD ADHESIVE BONDS - DETERMINATION OF SHEAR STRENGTH BY TENSILE LOADING
ISO TR 13329 : 2012	NANOMATERIALS - PREPARATION OF MATERIAL SAFETY DATA SHEET (MSDS)
FD T50 063 : 95 FD	PLASTICS - PROCESSING MATERIALS - GUIDE FOR THE ELABORATION OF A TECHNICAL SHEET
DIN EN ISO 1133-2 : 2012	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011)
09/30192414 DC : 0	BS ISO 16014-3 - PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 3: LOW-TEMPERATURE METHOD
UNI EN 1329-1 : 2014	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN ISO 15494 E : 2016	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PERT), CROSSLINKED POLYETHYLENE (PEX), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
DIN EN ISO 1452-1 : 2010	PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL
DIN EN 131-6 : 2015	LADDERS - PART 6: TELESCOPIC LADDERS
BS ISO 2535 : 1997 AMD 10259	PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT 25 DEG C
DIN EN 16153 : 2015	LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 1133-2 E : 2012	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011)
UNI EN 15345 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
DIN EN ISO 16664 : 2016	GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017)
ISO/DIS 21475 : 40.20 (2018)	PLASTICS - METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION
EN ISO 15494 : 2015	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
ASTM D 1972 : 1997	Standard Practice for Generic Marking of Plastic Products
SAE AMS 2950/1 : 2008	PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS
ISO 15494 : 2015	PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM
DIN 7724 : 1993	POLYMERIC MATERIALS; GROUPING OF POLYMERIC MATERIALS BASED ON THEIR MECHANICAL BEHAVIOUR
UNI EN ISO 22391-1 : 2010	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
DIN EN ISO 22391-1 : 2010	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
UNI EN ISO 11357-2 : 2014	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT
DIN EN ISO 16396-2 E : 2017	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
ISO 16525-4 : 2014	ADHESIVES - TEST METHODS FOR ISOTROPIC ELECTRICALLY CONDUCTIVE ADHESIVES - PART 4: DETERMINATION OF SHEAR STRENGTH AND ELECTRICAL RESISTANCE USING RIGID-TO-RIGID BONDED ASSEMBLIES
ISO 10927 : 2011	PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
BS ISO 12086-2 : 2001 AMD 10637	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS
DIN ISO 16486-1 E : 2015	PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL (ISO 16486-1:2012 + AMD 1:2014)
I.S. EN 15701:2016	PLASTICS - THERMOPLASTIC JACKETS FOR INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - REQUIREMENTS AND TEST METHODS
NBR NM-60454-1 : 2007	SPECIFICATIONS FOR PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 1: GENERAL REQUIREMENTS
EN 1451-1 : 2017	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN ISO 1183-1 : 2013	PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
CEI EN 61111 : 2010	LIVE WORKING - ELECTRICAL INSULATING MATTING
ISO 3598 : 2011(R2016)	TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION
I.S. EN 61111:2009	LIVE WORKING - ELECTRICAL INSULATING MATTING
ISO 17212 : 2012(R2017)	STRUCTURAL ADHESIVES - GUIDELINES FOR THE SURFACE PREPARATION OF METALS AND PLASTICS PRIOR TO ADHESIVE BONDING
ISO 3451-1 : 2008	PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
UNE-EN ISO 6721-1:2012	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 6721-1:2011)
ONORM EN ISO 11357-3 : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 3: DETERMINATION OF TEMPERATURE AND ENTHALPY OF MELTING AND CRYSTALLIZATION (ISO 11357-3:2011)
ISO 10210 : 2012(R2017)	PLASTICS - METHODS FOR THE PREPARATION OF SAMPLES FOR BIODEGRADATION TESTING OF PLASTIC MATERIALS
UNI EN ISO 15877-1 : 2011	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 1: GENERAL
ISO 22007-1 : 2017	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES
UNI EN ISO 1133-2 : 2012	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE
ISO 15270 : 2008(R2018)	PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE
ISO 10364 : 2015	STRUCTURAL ADHESIVES - DETERMINATION OF THE POT LIFE (WORKING LIFE) OF MULTI-COMPONENT ADHESIVES
I.S. EN ISO 21003-1:2008	MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL
BS ISO 18437-6 : 2017	MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 6: TIME-TEMPERATURE SUPERPOSITION
ASTM D 6988 : 2013 : REDLINE	Standard Guide for Determination of Thickness of Plastic Film Test Specimens
I.S. EN ISO 877-1:2010	PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
EN 1455-1 : 1999	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 1: REQUIREMENTS FOR PIPES, FITTINGS AND THE SYSTEM
DIN EN ISO 16014-5 E : 2012	PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012)
ISO 16525-6 : 2014	ADHESIVES - TEST METHODS FOR ISOTROPIC ELECTRICALLY CONDUCTIVE ADHESIVES - PART 6: DETERMINATION OF PENDULUM-TYPE SHEAR IMPACT
NBR ISO 21138-1 : 2016	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY (VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: MATERIAL SPECIFICATIONS AND PERFORMANCE CRITERIA FOR PIPES, FITTINGS AND SYSTEM
I.S. EN ISO 178:2010	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010)
I.S. EN 15345:2007	PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
I.S. EN 16575:2014	BIO-BASED PRODUCTS - VOCABULARY
I.S. EN 15348:2014	PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(ETHYLENE TEREPHTHALATE) (PET) RECYCLATES
ISO 20819 : 2018	PLASTICS - WOOD-PLASTIC RECYCLED COMPOSITES (WPRC) - SPECIFICATION
ASTM D 4092 : 2007	Standard Terminology: Plastics: Dynamic Mechanical Properties
I.S. EN ISO 11358-1:2014	PLASTICS - THERMOGRAVIMETRY (TG) OF POLYMERS - PART 1: GENERAL PRINCIPLES (ISO 11358-1:2014)
SR CEN/TS 16011:2013	PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
I.S. EN ISO 25762:2012	PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009)
I.S. EN 16240:2013	LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 13245-2:2008	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 2: PVC-U PROFILES AND PVC-UE PROFILES FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
UNE EN ISO 16396-2 : 2017	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
ISO/DIS 21257 : 40.20 (2018)	PLASTICS - POLYMER POLYOLS FOR USE IN THE PRODUCTION OF POLYURETHANE - DETERMINATION OF THE RESIDUAL ACRYLONITRILE AND STYRENE MONOMER CONTENT BY GAS CHROMATOGRAPHY
EN ISO 4007 : 2012 COR 2012	PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY (ISO 4007:2012)
BS IEC 62899-201 : 2016	PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
UNI EN 15342 : 2008	PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
ONORM EN ISO 10927 : 2011	PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
I.S. EN 131-6:2015	LADDERS - PART 6: TELESCOPIC LADDERS
UNI EN 16575 : 2014	BIO-BASED PRODUCTS - VOCABULARY
BS ISO 18437-2 : 2005	MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 2: RESONANCE METHOD
I.S. EN 1451-1:2017	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
BS EN 1852-1 : 2018	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
I.S. EN ISO 10927:2011	PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
I.S. EN 60903:2003	LIVE WORKING - GLOVES OF INSULATING MATERIAL
UNI EN 15870 : 2009	ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS
BS ISO 18437-3 : 2005	MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 3: CANTILEVER SHEAR BEAM METHOD
PREN 131-2 : DRAFT 2009	LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
I.S. EN ISO 22007-3:2012	PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 3: TEMPERATURE WAVE ANALYSIS METHOD (ISO 22007-3:2008)
I.S. EN ISO 8062-1:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 1: VOCABULARY
BIS IS 13360-2-2 : 2013	PLASTICS - METHODS OF TESTING - PART 2: SAMPLING AND PREPARATION OF TEST SPECIMENS - SECTION 2: COMPRESSION MOULDED TEST SPECIMENS OF THERMOPLASTIC MATERIALS
I.S. EN 17098-1:2018	PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
I.S. EN 61479:2001	LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
BS EN 16153 : 2013	LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
SR CEN/TS 15534-1:2007	WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
UNE EN 16575 : 2015	BIO-BASED PRODUCTS - VOCABULARY
I.S. CLC/TS 61112:2006	BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
ISO 6721-10 : 2015(R2016)	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 10: COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER
ISO 18437-5 : 2011(R2017)	MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 5: POISSON RATIO BASED ON COMPARISON BETWEEN MEASUREMENTS AND FINITE ELEMENT ANALYSIS
EN ISO 3451-1 : 2008	PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS
UNE ISO 1268-10 : 2012	FIBRE-REINFORCED PLASTICS - METHODS OF PRODUCING TEST PLATES - PART 10: INJECTION MOULDING OF BMC AND OTHER LONG-FIBRE MOULDING COMPOUNDS - GENERAL PRINCIPLES AND MOULDING OF MULTIPURPOSE TEST SPECIMENS
I.S. EN ISO 6721-1:2011	PLASTICS - DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES - PART 1: GENERAL PRINCIPLES
I.S. EN ISO 22391-1:2009	PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 1: GENERAL
NFL 17 021 : 98 PR	AEROSPACE SERIES - NON-METALLIC MATERIALS - RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES - CHARACTERISATION BY LIQUID CHROMATOGRAPHY
I.S. EN 62011-1:2002	INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS, DESIGNATIONS AND GENERAL REQUIREMENTS
SR CEN/TR 15353:2007	PLASTICS - RECYCLED PLASTICS - GUIDELINES FOR THE DEVELOPMENT OF STANDARDS FOR RECYCLED PLASTICS
ISO 16620-1 : 2015	PLASTICS - BIOBASED CONTENT - PART 1: GENERAL PRINCIPLES
NF EN ISO 877-1 : 2011	PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE
I.S. EN 17098-2:2018	PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE
ISO 16014-5 : 2012	PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION
ISO 12815 : 2013(2018)	FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH
I.S. EN 16245-2:2013	FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
I.S. EN ISO 16014-5:2012	PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY - PART 5: METHOD USING LIGHT-SCATTERING DETECTION (ISO 16014-5:2012)
BS EN 1451-1 : 2017	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
BS EN ISO 10927 : 2011	PLASTICS - DETERMINATION OF THE MOLECULAR MASS AND MOLECULAR MASS DISTRIBUTION OF POLYMER SPECIES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION TIME-OF-FLIGHT MASS SPECTROMETRY (MALDI-TOF-MS)
ISO 19929 : 2017	PLASTICS - DETERMINATION OF AVERAGE MOLECULAR MASS AND MIXTURE RATIO OF POLY(ETHYLENE GLYCOL) AND ITS DERIVATIVES BY MALDI-TOF-MS