ISO 4759-1 : 2000(R2017)

Current

Current The latest, up-to-date edition.

Preview

TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C

Publisher: International Organization for Standardization

Published: 01-01-2000

Available Formats: PDF - Russian, Hardcopy - Russian, PDF - French, Hardcopy - French, PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Tolerances for metric bolts, screws
   and studs
4 Tolerances for metric nuts
5 Tolerances for tapping screws
Annex A (informative) Tolerances
Annex B (informative) Examples of dimensioned
        and toleranced fasteners
Annex C (informative) Examples of gauges
        and other measuring devices

Abstract - (Show below) - (Hide below)

Describes a selection of tolerances for bolts, screws, studs and nuts with ISO metric threads and with product grades A, B and C and for tapping screws with product grade A.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Revision
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 2
Supersedes	ISO 733 : LATEST ISO 4759-1 : 1978

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN ISO 4759-1 : 2001	Identical
NF EN ISO 4759-1 : 2001	Identical
NBN E 27 073 : 1988	Identical
NBN EN ISO 4759-1 : 2001	Identical
NBN EN 24015 : 1992	Identical
NBN EN 24766 : 1992	Identical
NBN EN 27434 : 1992	Identical
NBN EN 27435 : 1992	Identical
NBN EN 27436 : 1992	Identical
NEN EN ISO 4759-1 : 2001	Identical
NS EN ISO 4759-1 : 1ED 2001	Identical
I.S. EN ISO 4759-1:2000	Identical
PN EN ISO 4759-1 : 2004	Identical
SANS 1700-4-1 : 2ED 2003(R2014)	Identical
SN ISO 4759-1 : 1981	Identical
UNI EN ISO 4759-1 : 2001	Identical
AS 5066-2002 (R2016)	Identical
BIS IS 1367-2 : 2002	Identical
BS EN ISO 4759-1 : 2001	Identical
BS 4929-1(1973) : 1973	Identical
EN ISO 4759-1 : 2000	Identical
DIN EN ISO 4759-1 E : 2001	Identical
DIN EN ISO 4759-1 : 2001	Identical
PN EN ISO 4759-1 : 2004	Identical
BS 4929-1(1973) : 1973	Identical
SAC GB/T 3103.1 : 2002	Identical
NEN ISO 4759-1 : 1996	Identical
BIS IS 1367-2 : 2002	Identical
GOST ISO 4759-1 : 2015	Identical
AS 5066-2002 (R2016)	Identical
SN ISO 4759-1 : 1981	Identical
NS 1885 : 1ED 1981	Identical
AS/NZS 1112:1996	Identical
UNE EN ISO 4759-1 : 2001	Identical
DIN ISO 4759-1 : 1980	Identical
BS EN ISO 4759-1 : 2001	Identical
BS 6322-1(1982) : 1982	Identical
GOST R ISO 4759-1 : 2009	Identical
DIN EN ISO 4759-1 E : 2001	Identical
DIN EN ISO 4759-1 : 2001-04	Identical
SANS 1700-4-1 : 2ED 2003(R2014)	Identical
NBN E 27 073 : 1988	Identical
DS EN ISO 4759-1 : 2001	Identical
UNI ISO 4759-1 : 1981	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN 7964 : 1990	BOLTS AND SCREWS WITH COARSE THREAD AND REDUCED SHANK
DIN EN ISO 14581 E : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
DIN ISO 6149-2 : 1996	PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
IS 1367 : Part 1 : 2014	TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 1: GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS
I.S. EN ISO 7053:2011	HEXAGON WASHER HEAD TAPPING SCREWS
NBR 11207 : 1990
DIN EN ISO 1482 : 2011	SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS (ISO 1482:2011)
ISO 7041 : 2012(R2017)	PREVAILING TORQUE TYPE HEXAGON NUTS (WITH NON-METALLIC INSERT), STYLE 2 - PROPERTY CLASSES 9 AND 12
ASME B18.2.3.9M : 2001	METRIC HEAVY HEX FLANGE SCREWS
BS EN ISO 14582 : 2013	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD
BS EN 14399-8 : 2007	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
DIN EN ISO 1482 E : 2011	SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS (ISO 1482:2011)
DIN EN 14399-10 E : 2009	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
UNI EN ISO 7380-1 : 2012	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
ISO 15480 : 1999(R2014)	HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
ISO 13918 : 2017	WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING
BS ISO 12151-4 : 2007	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS
BS EN ISO 286-1 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS
NBR 11211 : 1990
DIN 787 : 2005	BOLTS AND SCREWS FOR T-SLOTS
UNE EN ISO 7380-2 : 2012	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR (ISO 7380-2:2011)
ASME B18.2.3.4M : 2001	METRIC HEX FLANGE SCREWS
DIN EN ISO 14582 : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
DIN EN ISO 7380-1 : 2011	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS (ISO 7380-1:2011)
DIN ISO 16030 E : 2007	PNEUMATIC FLUID POWER - CONNECTIONS - PORTS AND STUD ENDS
09/30208230 DC : 0	BS ISO 1483 - SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
BS 4219-4(1985) : 1985	SLOTTED SET SCREWS METRIC SERIES - SPECIFICATION FOR SLOTTED SET SCREWS WITH CUP POINT
DIN EN 14218 : 2003	HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD
BS EN ISO 1179-4 : 2008	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
DIN EN ISO 7050 : 2011	CROSS-RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS (ISO 7050:2011)
SAE J 2337-2 : 2017	CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: STUD END REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
DIN ISO 7049 : 1990	CROSS RECESSED PAN HEAD TAPPING SCREWS
DIN EN 14399-10 : 2016	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
09/30199060 DC : 0	BS ISO 11926-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
01/714275 DC : 0	ISO/DIS 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
05/30125061 DC : DRAFT MAR 2005	ISO 9974-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER STUD ENDS WITH ISO 261 THREADS WITH ELASTOMER METAL-TO-METAL SEALING - PART 4: DIMENSIONS, METHODS AND REQUIREMENTS FOR EXTERNAL PORT PLUGS
BS ISO 4162 : 2012	HEXAGON BOLTS WITH FLANGE - SMALL SERIES - PRODUCT GRADE A WITH DRIVING FEATURE OF PRODUCT GRADE B
NBR 11372 : 1990
NBR ISO 14743 : 2009	PNEUMATIC FLUID POWER - PUSH-IN CONNECTORS FOR THERMOPLASTIC TUBES
ISO 12151-2 : 2003(R2015)	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 2: HOSE FITTINGS WITH ISO 8434-1 AND ISO 8434-4 24 DEGREE CONE CONNECTOR ENDS WITH O-RINGS
09/30203245 DC : 0	BS ISO 7380-2 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 2: BUTTON HEAD WITH COLLAR (HEAD SHAPE B)
ISO/DIS 10509 : 60.00 (2012)	HEXAGON FLANGE HEAD TAPPING SCREWS
BS ISO 6149-3 : 1993	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS
05/30135789 DC : DRAFT JUL 2005	EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
SAE J 2337-3 : 2017	CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: PORT PLUG REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
ASME B18.2.9 : 2010	STRAIGHTNESS GAGE AND GAGING FOR BOLTS AND SCREWS
BS 4219-1(1985) : 1985	SLOTTED SET SCREWS METRIC SERIES - SPECIFICATION FOR SLOTTED SET SCREWS WITH FLAT POINT
ONORM EN ISO 8434-1 : 2009	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
BS 4219-2(1985) : 1985	SLOTTED SET SCREWS METRIC SERIES - SPECIFICATION FOR SLOTTED SET SCREWS WITH CONE POINT
BS 4168-7(1982) : 1982	HEXAGON SOCKET SCREWS AND WRENCH KEYS: METRIC SERIES - PART 7: SPECIFICATION FOR HEXAGON SOCKET SHOULDER SCREWS
DIN EN ISO 14582 E : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
08/30184309 DC : DRAFT SEP 2008	BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
BS EN ISO 4766 : 2011	SLOTTED SET SCREWS WITH FLAT POINT
BS ISO 16030 : 2001	PNEUMATIC FLUID POWER - CONNECTIONS - PORTS AND STUD ENDS
SAE J 516 : 2016	HYDRAULIC HOSE FITTINGS
BS EN 14399-7 : 2007	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
NBR ISO 691 : 2009	ASSEMBLY TOOLS FOR SCREWS AND NUTS - WRENCH AND SOCKET OPENINGS - TOLERANCES FOR GENERAL USE
DIN 787 E : 2005	T-HEAD BOLTS
I.S. EN ISO 16228:2018	FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017)
BIS IS 800 : 2007 AMD 1 2012	GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE
DIN EN ISO 7380-1 E : 2011	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS (ISO 7380-1:2011)
ISO 16228 : 2017	FASTENERS - TYPES OF INSPECTION DOCUMENTS
FORD WM 920 : 0	GENERAL SPECIFICATION FOR PORT PLUG
01/714274 DC : 0	ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
BS ISO 6149-2 : 1993	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
09/30208236 DC : 0	BS ISO 4766 - SLOTTED SET SCREWS WITH FLAT POINT
I.S. EN ISO 7380-1:2011	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
DIN EN ISO 7049 E : 2011	CROSS-RECESSED PAN HEAD TAPPING SCREWS (ISO 7049:2011)
DIN EN ISO 1179-4 : 2008	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
15/30332545 DC : 0	BS EN 14399-7 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
DIN EN 14399-8 E : 2008	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
BS ISO 10509 : 2012	HEXAGON FLANGE HEAD TAPPING SCREWS
09/30203242 DC : 0	BS ISO 7380-1 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 1: BUTTON HEAD (HEAD SHAPE A)
11/30219208 DC : 0	BS ISO 888 - BOLTS, SCREWS AND STUDS - NOMINAL LENGTHS, AND THREAD LENGTHS FOR GENERAL PURPOSE BOLTS
NBR 11198 : 1990
ASME B18.2.9 : 2010 : R2017	STRAIGHTNESS GAGE AND GAGING FOR BOLTS AND SCREWS
ISO/DIS 15480 : 40.20 (2018)	HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
BS EN ISO 12474 : 2010	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
16/30337591 DC : DRAFT APR 2016	BS ISO 7043 - PREVAILING TORQUE HEXAGON HIGH NUTS WITH FLANGE (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B
BIS IS 9549-1 : 2014	FASTENERS - BOLTS, SCREWS AND STUDS - PART 1: SPLIT PIN HOLES AND WIRE HOLES
11/30237817 DC : 0	BS ISO 7076-2 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 2: LOW EXPANSION FOAM EQUIPMENT
09/30208217 DC : 0	BS ISO 1207 - SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
16/30290140 DC : 0	BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
DIN ISO 1481 : 1990-08	SLOTTED PAN HEAD TAPPING SCREWS
SAE J 1453/2 : 2015	SPECIFICATION FOR O-RING FACE SEAL CONNECTORS - PART 2: REQUIREMENTS, DIMENSIONS, AND TESTS FOR STEEL UNIONS, BULKHEADS, SWIVELS, BRAZE SLEEVES, BRAZE-ON TUBE ENDS, CAPS, AND CONNECTORS WITH ISO 6149-2 METRIC STUD ENDS AND ISO 6162 4-BOLT FLANGE HEADS
DIN EN 14399-7 E : 2008	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
UNE EN 15048-1 : 2018	NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
BS ISO 7720 : 2012	PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS, STYLE 2 - PROPERTY CLASS 9
DIN EN ISO 1179-4 E : 2008	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
ISO 7720 : 2012(R2017)	PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS, STYLE 2 - PROPERTY CLASS 9
DIN EN ISO 7051 E : 2011	CROSS-RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS (ISO 7051:2011)
DIN EN ISO 1479 : 2011	HEXAGON HEAD TAPPING SCREWS (ISO 1479:2011)
DIN ISO 1483 : 1990	SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS (COMMON HEAD STYLE)
SAE J 1926/2 : 2016	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS
01/714273 DC : 0	ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
BS 4168-3(1994) : 1994	HEXAGON SOCKET SCREWS AND WRENCH KEYS: METRIC SERIES - SPECIFICATION FOR HEXAGON SOCKET SET SCREWS WITH CONE POINT
BS EN 13565-1 : 2003	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
PREN ISO 1481 : DRAFT 2009	SLOTTED PAN HEAD TAPPING SCREWS
04/30124525 DC : DRAFT OCT 2004	ISO/DIS 6149-2 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
BS ISO 9974-4 : 2006	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
16/30337630 DC : DRAFT APR 2016	BS EN ISO 7719 - PREVAILING TORQUE (ALL-METAL) HEXAGON REGULAR NUTS - PRODUCT GRADES A AND B
DIN ISO 16030 : 2007	PNEUMATIC FLUID POWER - CONNECTIONS - PORTS AND STUD ENDS
BS ISO 8434-6 : 2009	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
16/30337584 DC : 0	BS ISO 7041 - PREVAILING TORQUE HEXAGON HIGH NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B
15/30287653 DC : 0	BS ISO 7076-4 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 4: HIGH EXPANSION FOAM EQUIPMENT
UNI EN ISO 4766 : 2012	SLOTTED SET SCREWS WITH FLAT POINT
15/30287650 DC : 0	BS ISO 7076-3 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 3: MEDIUM EXPANSION FOAM EQUIPMENT
15/30280562 DC : 0	BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS
DIN ISO 8992 : 2005-09	FASTENERS; GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS
16/30337618 DC : 0	BS EN ISO 8675 - HEXAGON THIN NUTS (STYLE 0) CHAMFERED, WITH FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 12474 E : 2011	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
BS 6322-3(1982) : 1982	TOLERANCES FOR FASTENERS - OF WASHERS FOR METRIC BOLTS SCREWS AND NUTS WITH THREAD DIAMETERS FROM 1 MM UP TO AND INCLUDING 150 MM PRODUCT GRADES A AND C
BS 4168-2(1994) : 1994	HEXAGON SOCKET SCREWS AND WRENCH KEYS: METRIC SERIES - SPECIFICATION FOR HEXAGON SOCKET SET SCREWS WITH FLAT POINT
16/30337626 DC : 0	BS EN ISO 8673 - HEXAGON REGULAR NUTS (STYLE 1), WITH FINE PITCH THREAD - PRODUCT GRADES A AND B
16/30337587 DC : DRAFT APR 2016	BS EN ISO 7042 - PREVAILING TORQUE (ALL-METAL) HEXAGON HIGH NUTS - PRODUCT GRADES A AND B
16/30337622 DC : DRAFT MAR 2016	BS EN ISO 8674 - HEXAGON HIGH NUTS (STYLE 2), WITH FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 1479 E : 2011	HEXAGON HEAD TAPPING SCREWS (ISO 1479:2011)
DIN EN ISO 7050 E : 2011	CROSS-RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS (ISO 7050:2011)
UNE EN ISO 7380-1 : 2012	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS (ISO 7380-1:2011)
BS 4168-8(1982) : 1982	HEXAGON SOCKET SCREWS AND WRENCH KEYS: METRIC SERIES - SPECIFICATION FOR HEXAGON SOCKET COUNTERSUNK HEAD SCREWS
UNI EN ISO 14581 : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS
ISO 6149-4 : 2017	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
NBR 11900-4 : 2016	TERMINATIONS FOR STEEL WIRE ROPES - PART 4: WEIGHTLESS AND WEIGHED CLAMPS
PREN ISO 4766 : DRAFT 2009	SLOTTED SET SCREWS WITH FLAT POINT
16/30337580 DC : 0	BS EN ISO 7040 - PREVAILING TORQUE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PRODUCT GRADES A AND B
DIN ISO 6149-3 E : 1996	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
11/30237814 DC : 0	BS ISO 7076-1 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 1: FOAM PROPORTIONING EQUIPMENT
07/30166055 DC : 0	BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
BS ISO 12151-6 : 2009	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS
BS 4219-3(1985) : 1985	SLOTTED SET SCREWS METRIC SERIES - SPECIFICATION FOR SLOTTED SET SCREWS WITH LONG DOG POINT
16/30337569 DC : 0	BS EN ISO 4034 - HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C
16/30337573 DC : DRAFT APR 2016	BS EN ISO 4035 - HEXAGON THIN NUTS (STYLE 0), CHAMFERED - PRODUCT GRADES A AND B
DIN EN ISO 1483 E : 2011	SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS (ISO 1483:2011)
BS EN ISO 14581 : 2013	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS
12/30260523 DC : 0	BS EN ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD NDS WITH ELASTOMERIC SEALING (TYPE E) (ISO/DIS 1179-2:2012)
DIN ISO 8992 E : 2005	FASTENERS - GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS
DIN ISO 691 E : 2007	ASSEMBLY TOOLS FOR SCREWS AND NUTS - WRENCH AND SOCKET OPENINGS - TOLERANCES FOR GENERAL USE
PREN 13565-1 : DRAFT 2016	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
05/30127096 DC : DRAFT FEB 2005	ISO 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
00/715332 DC : DRAFT OCT 2000	ISO/CD 12151-6 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS
04/30124527 DC : DRAFT OCT 2004	ISO/DIS 6149-3 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS
BS ISO 6149-4 : 2006	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
DIN ISO 7050 : 1990	CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS (COMMON HEAD STYLE)
02/711588 DC : DRAFT OCT 2002	SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS - PART 2: GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND OPERATED SCREWS
BS EN 16602-70-46 : 2014	SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS
FORD WB 910 : 0	WORLDWIDE FASTENER STANDARD - GENERAL AND DIMENSIONAL REQUIREMENTS OF PAN HEAD BOLTS AND SCREWS, PAN HEAD BOLT & WASHER AND SCREW & WASHER ASSEMBLIES
09/30208248 DC : 0	BS ISO 7053 - HEXAGON WASHER HEAD TAPPING SCREWS
05/30135258 DC : DRAFT JUN 2005	ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS AND ELASTOMERIC SEALING (TYPE E)
09/30199068 DC : 0	BS ISO 11926-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 263 INCH THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS
16/30337594 DC : DRAFT APR 2016	BS ISO 7044 - PREVAILING TORQUE (ALL-METAL) HEXAGON HIGH NUTS WITH FLANGE - PRODUCT GRADES A AND B
BS ISO 7041 : 2012	PREVAILING TORQUE TYPE HEXAGON NUTS (WITH NON-METALLIC INSERT), STYLE 2 - PROPERTY CLASSES 9 AND 12
DIN ISO 6149-3 : 1996	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS
BS ISO 12151-2 : 2003	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 2: HOSE FITTINGS WITH ISO 8434-1 AND ISO 8434-4 24 DEGREE CONE CONNECTOR ENDS WITH O-RINGS
BS 5983-5(1982) : 1982	METRIC SPHERICAL PLAIN BEARINGS - SPECIFICATION FOR DIMENSIONS AND TOLERANCES OF SPHERICAL PLAIN BEARING ROD ENDS DIMENSION SERIES E AND JK
02/707699 DC : DRAFT JUN 2002	ISO/DIS 21670 - HEXAGON WELD NUTS WITH FLANGE
DIN EN ISO 4766 E : 2011	SLOTTED SET SCREWS WITH FLAT POINT (ISO 4766:2011)
09/30208227 DC : 0	BS ISO 1482 - SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
DIN EN ISO 7049 : 2011	CROSS-RECESSED PAN HEAD TAPPING SCREWS (ISO 7049:2011)
DIN EN ISO 1179-3 : 2008	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
NF EN ISO 7380-1 : 2011	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
07/30163197 DC : 0	BS ISO 12151-1 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS
BS ISO 888 : 2012	FASTENERS - BOLTS, SCREWS AND STUDS - NOMINAL LENGTHS AND THREAD LENGTHS
DIN 912 : 1983	HEXAGON SOCKET HEAD CAP SCREWS
BS ISO 10663 : 2012	HEXAGON NUTS WITH FLANGE, STYLE 2 - FINE PITCH THREAD
ONORM EN ISO 7053 : 2011	HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011)
NBR 11199 : 1990
DIN ISO 2380-2 E : 2006	ASSEMBLY TOOLS FOR SCREWS AND NUTS - SCREWDRIVERS FOR SLOTTED-HEAD SCREWS - PART 2: GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS
BS ISO 14743 : 2004	PNEUMATIC FLUID POWER - PUSH-IN CONNECTORS FOR THERMOPLASTIC TUBES
DIN EN ISO 1481 E : 2011	SLOTTED PAN HEAD TAPPING SCREWS (ISO 1481:2011)
PREN ISO 1482 : DRAFT 2009	SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
UNI ISO 12151-6 : 2012	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS
DIN EN ISO 7053 E : 2011	HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011)
DIN ISO 1479 : 1990	HEXAGON HEAD TAPPING SCREWS
16/30341197 DC : 0	BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
00/715331 DC : 0	ISO/CD 8434-6 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
BS ISO 8434-2 : 2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREES FLARED CONNECTORS
ISO 10509 : 2012(R2017)	HEXAGON FLANGE HEAD TAPPING SCREWS
DIN EN 14218 E : 2003	HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD
BIS IS 1363-3 : 2002	HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 3: HEXAGON NUTS (SIZE RANGE M 5 TO M 64)
UNE EN ISO 12474 : 2011	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
ASME B18.2.3.4M : 2001	METRIC HEX FLANGE SCREWS
NF ISO 12151-1 : 2010 AMD 1 2017	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS
09/30208245 DC : 0	BS ISO 7051 - CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
DIN ISO 1482 : 1990	SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS (COMMON HEAD STYLE)
DIN ISO 12151-2 : 2004	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 2: HOSE FITTINGS WITH ISO 8434-1 AND 8434-4 24 DEGREES CONE CONNECTOR ENDS WITH O-RINGS
DIN 939 E : 1995	STUDS - METAL END CA. 1,25 D
16/30342991 DC : 0	BS EN ISO 13918 - WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING
PREN ISO 7050 : DRAFT 2009	CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
15/30332551 DC : 0	BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
05/30135263 DC : DRAFT JUN 2005	ISO 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
NBR 11209 : 1990
ISO 14743 : 2004(R2008)	PNEUMATIC FLUID POWER - PUSH-IN CONNECTORS FOR THERMOPLASTIC TUBES
UNI ISO 8434-6 : 2012	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
09/30208242 DC : 0	BS ISO 7050 - CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
09/30208224 DC : 0	BS ISO 1481 - SLOTTED PAN HEAD TAPPING SCREWS
NBR 11197 : 1990
17/30366640 DC : 0	BS ISO 14743 - PNEUMATIC FLUID POWER - PUSH-IN CONNECTORS FOR THERMOPLASTIC TUBES
UNI ISO 8764-2 : 2008	ASSEMBLY TOOLS FOR SCREWS AND NUTS - SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS - PART 2: GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS
DIN EN ISO 7051 : 2011	CROSS-RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS (ISO 7051:2011)
DIN EN ISO 1481 : 2011	SLOTTED PAN HEAD TAPPING SCREWS (ISO 1481:2011)
09/30208239 DC : 0	BS ISO 7049 - CROSS RECESSED PAN HEAD TAPPING SCREWS
NF EN ISO 12474 : 2010	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
98/714984 DC : DRAFT SEP 1998	ISO/CD 8434-3 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL FITTINGS
NF ISO 12151-6 : 2009	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREES CONE ENDS
DIN EN 14399-8 : 2016	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
BS ISO 8992 : 2005	FASTENERS - GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS
ASME B18.2.3.4M : 2001 : R2011	METRIC HEX FLANGE SCREWS
BS EN ISO 7380-1 : 2011	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
BS ISO 8434-4 : 1995 AMD 11038	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
BS EN ISO 7053 : 2011	HEXAGON WASHER HEAD TAPPING SCREWS
UNI EN ISO 286-1 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS
ASME B18.2.3.9M : 2001	METRIC HEAVY HEX FLANGE SCREWS
NBR 11404 : 1990
BS EN ISO 1179-3 : 2008	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
DIN ISO 7051 : 1990	CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
BS 4168-5(1994) : 1994	HEXAGON SOCKET SCREWS AND WRENCH KEYS: METRIC SERIES - SPECIFICATION FOR HEXAGON SOCKET SET SCREWS WITH CUP POINT
NBR ISO 8434-2 : 2010	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREES FLARED CONNECTORS
BIS IS 1363-1 : 2002	HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64)
BS ISO 4161 : 2012	HEXAGON NUTS WITH FLANGE, STYLE 2 - COARSE THREAD
ISO 5713 : 1990(R2018)	EQUIPMENT FOR WORKING THE SOIL - FIXING BOLTS FOR SOIL WORKING ELEMENTS
ASME B18.2.3.9M : 2001 : R2014	METRIC HEAVY HEX FLANGE SCREWS
UNI ISO 2380-2 : 2008	ASSEMBLY TOOLS FOR SCREWS AND NUTS - SCREWDRIVERS FOR SLOTTED-HEAD SCREWS - PART 2: GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS
UNI EN ISO 1179-4 : 2008	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
ISO 12126 : 2012	PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS WITH FLANGE WITH METRIC FINE PITCH THREAD, STYLE 2 - PRODUCT GRADES A AND B
ASME B18.2.9 : 2010	STRAIGHTNESS GAGE AND GAGING FOR BOLTS AND SCREWS
18/30359968 DC : DRAFT APR 2018	BS EN ISO 15480 - HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
I.S. EN ISO 1179-4:2008	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
I.S. EN 14399-10:2009	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
BS 7635(1993) : 1993 AMD 8439	SPECIFICATION FOR SLOTTED CHEESE HEAD SCREWS: PRODUCT GRADE A
ASME B18.2.3.4M : 2001 : R2006	METRIC HEX FLANGE SCREWS
BS ISO 15072 : 2012	HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES - PRODUCT GRADE A
BS ISO 12151-5 : 2007	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 5: HOSE FITTINGS WITH ISO 8434-2 37 DEGREES FLARED ENDS
I.S. EN ISO 7380-2:2011	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
05/30135261 DC : DRAFT JUN 2005	ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
05/30127446 DC : DRAFT JAN 2005	ISO 13584-511 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 511: MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE - REFERENCE DICTIONARY FOR FASTENERS
UNE EN 14399-3 : 2016	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
NF ISO 8434-6 : 2009	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREES CONE CONNECTORS WITH OR WITHOUT O-RING
DIN ISO 3269 : 1992	FASTENERS - ACCEPTANCE INSPECTION
UNI EN ISO 14582 : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD
UNE EN 14399-1 : 2016	HIGH STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
UNE EN 14399-4 : 2016	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
BIS IS 2269 : 2006	HEXAGON SOCKET HEAD CAP SCREWS
I.S. EN 16602-70-46:2014	SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS
ASME B18.2.3.9M : 2001 : R2006	METRIC HEAVY HEX FLANGE SCREWS
DIN EN ISO 286-1 E : 2010	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS
PREN 14399-8 : DRAFT 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
ISO 2380-2:2004(R2019)	ASSEMBLY TOOLS FOR SCREWS AND NUTS - SCREWDRIVERS FOR SLOTTED-HEAD SCREWS - PART 2: GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS
DIN EN ISO 7053 : 2011	HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011)
DIN ISO 8764-2 : 2006	ASSEMBLY TOOLS FOR SCREWS AND NUTS - SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS - PART 2: GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS
UNI ISO 12151-4 : 2012	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS
DIN ISO 12151-2 E : 2004	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 2: HOSE FITTINGS WITH ISO 8434-1 AND ISO 8434-4 24 DEGREE CONE CONNECTOR ENDS WITH O-RINGS
DIN ISO 2380-2 : 2006-01	ASSEMBLY TOOLS FOR SCREWS AND NUTS - SCREWDRIVERS FOR SLOTTED-HEAD SCREWS - PART 2: GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS
DIN EN ISO 7380-2 E : 2011	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR (ISO 7380-2:2011)
SAE J 1926/3 : 2016	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS
NBR 11373 : 1990
NF EN ISO 7380-2 : 2011	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
ISO 888 : 2012(R2017)	FASTENERS - BOLTS, SCREWS AND STUDS - NOMINAL LENGTHS AND THREAD LENGTHS
UNI ISO 12151-5 : 2012	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 5: HOSE FITTINGS WITH ISO 8434-2 37 DEGREE FLARED ENDS
ISO 7076-3 : 2016	FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 3: MEDIUM EXPANSION FOAM EQUIPMENT
NBR ISO 8434-3 : 2010	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS
ISO 7076-2 : 2012(R2017)	FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 2: LOW EXPANSION FOAM EQUIPMENT
UNE EN ISO 7053 : 2011	HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011)
PREN ISO 1483 : DRAFT 2009	SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
PREN 14399-7 : DRAFT 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
SAE J 2337-1 : 2014	CONNECTIONS FOR FLUID POWER AND HIGH PRESSURE USE - PORTS, STUD ENDS, AND PLUGS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH RECESSED CONICAL SEAT REQUIREMENTS, DIMENSIONS, DESIGN, AND TEST METHODS
ISO 7043 : 2012(R2017)	PREVAILING TORQUE TYPE HEXAGON NUTS WITH FLANGE (WITH NON-METALLIC INSERT), STYLE 2 - PRODUCT GRADES A AND B
I.S. EN ISO 4766:2011	SLOTTED SET SCREWS WITH FLAT POINT
UNE EN ISO 286-1 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010/COR 1:2013)
BS ISO 8434-3 : 2005	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS
ISO 12151-1 : 2010(R2016)	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS
I.S. EN ISO 14581:2013	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
ISO 8434-3 : 2005(R2015)	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS
NF EN ISO 4766 : 2011	SLOTTED SET SCREWS WITH FLAT POINT
ISO 4161 : 2012(R2017)	HEXAGON NUTS WITH FLANGE, STYLE 2 - COARSE THREAD
BS EN ISO 16228 : 2018	FASTENERS - TYPES OF INSPECTION DOCUMENTS
I.S. EN ISO 14582:2013	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
I.S. EN 14399-7:2007	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
ISO 4162 : 2012(R2017)	HEXAGON BOLTS WITH FLANGE - SMALL SERIES - PRODUCT GRADE A WITH DRIVING FEATURE OF PRODUCT GRADE B
ISO 12151-5 : 2007(R2015)	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 5: HOSE FITTINGS WITH ISO 8434-2 37 DEGREE FLARED ENDS
BS EN ISO 7380-2 : 2011	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR (ISO 7380-2:2011)
BS ISO 12151-1 : 2010	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS
I.S. EN ISO 12474:2010	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
I.S. EN 15048-1:2016	NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
I.S. EN 13565-1:2004	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
DIN EN ISO 286-1 : 2010-11	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS
ISO 9974-4 : 2016	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS
I.S. EN ISO 1179-3:2008	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
UNI ISO 8434-3 : 2012	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS
ISO 8434-1 : 2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 7044 : 2012(2017)	PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS WITH FLANGE, STYLE 2 - PRODUCT GRADES A AND B
I.S. EN ISO 6149-4:2017	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
NF EN ISO 7053 : 2011	HEXAGON WASHER HEAD TAPPING SCREWS
ISO 8678 : 1988(R2015)	CUP HEAD SQUARE NECK BOLTS WITH SMALL HEAD & SHORT NECK - PRODUCT GRADE B
UNE EN ISO 14582 : 2015-12	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
EN 14399-8 : 2007	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
UNI EN 14399-8 : 2008	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
ISO 15072:2012(R2017)	HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES - PRODUCT GRADE A
ISO 7076-4 : 2016	FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 4: HIGH EXPANSION FOAM EQUIPMENT
PREN ISO 7051 : DRAFT 2009	CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
ISO 13584-511 : 2006(2018)	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 511: MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE - REFERENCE DICTIONARY FOR FASTENERS
ISO 6305-4 : 1985(R2017)	RAILWAY COMPONENTS - TECHNICAL DELIVERY REQUIREMENTS - PART 4: UNTREATED STEEL NUTS AND BOLTS AND HIGH-STRENGTH NUTS AND BOLTS FOR FISH-PLATES AND FASTENINGS
ISO 16030 : 2001(R2014)	PNEUMATIC FLUID POWER - CONNECTIONS - PORTS AND STUD ENDS
EN 14399-7 : 2007	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
I.S. EN ISO 13918:2018	WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING (ISO 13918:2017)
ISO 286-1 : 2010(R2015)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS
PREN ISO 1207 : DRAFT 2009	SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
PREN 14399-10 : DRAFT 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
SAE J 1231 : 2016	FORMED TUBE ENDS FOR HOSE CONNECTIONS AND HOSE FITTINGS
ISO 15071 : 2011R(2016)	HEXAGON BOLTS WITH FLANGE - SMALL SERIES - PRODUCT GRADE A
UNI EN 14399-10 : 2009	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
UNE EN ISO 6149-4 : 2017	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
DIN EN ISO 1483 : 2011	SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS (ISO 1483:2011)
DIN EN ISO 8434-1 E : 2008	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
UNI EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
BS EN 14399-10 : 2009	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
NBR 11403 : 1990
DIN EN 14399-7 : 2016	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
DIN EN ISO 12474 : 2011	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
UNE EN ISO 4766 : 2012	SLOTTED SET SCREWS WITH FLAT POINT (ISO 4766:2011)
UNI EN ISO 8434-1 : 2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
DIN EN 13565-1 E : 2008	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
ISO 12125 : 2012	PREVAILING TORQUE TYPE HEXAGON NUTS WITH FLANGE (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD, STYLE 2 - PRODUCT GRADES A AND B
UNI EN ISO 7053 : 2012	HEXAGON WASHER HEAD TAPPING SCREWS
UNI EN ISO 7380-2 : 2012	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
PREN ISO 7049 : DRAFT 2009	CROSS RECESSED PAN HEAD TAPPING SCREWS
UNI EN ISO 12474 : 2010	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
UNI EN ISO 1179-3 : 2008	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
UNI EN ISO 7048 : 2011	CROSS-RECESSED CHEESE HEAD SCREWS
NBR ISO 8434-1 : 2010	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS
UNE EN ISO 14581 : 2016	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
UNI ISO 8434-2 : 2012	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS
BIS IS 1364-6 : 2002	HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 6: HEXAGON NUTS, STYLE 2
EN 15048-1 : 2016	NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
NBR 11200 : 1990 ERRATA 1996
NBR 11196 : 1990
BS ISO 8434-1 : 94 AMD 9583	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE COMPRESSION FITTINGS
DIN EN ISO 1179-3 E : 2008	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
ISO 7053 : 2011(R2016)	HEXAGON WASHER HEAD TAPPING SCREWS
BS 4168-4(1994) : 1994	HEXAGON SOCKET SCREWS AND WRENCH KEYS: METRIC SERIES - SPECIFICATION FOR HEXAGON SOCKET SET SCREWS WITH DOG POINT
11/30239640 DC : 0	BS ISO 10509 - HEXAGON FLANGE HEAD TAPPING SCREWS
09/30202626 DC : 0	BS EN ISO 12474 - HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
15/30332548 DC : 0	BS EN 14399-8 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
ISO 8992 : 2005(R2018)	FASTENERS - GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS
DIN ISO 691 : 2007-04	ASSEMBLY TOOLS FOR SCREWS AND NUTS - WRENCH AND SOCKET OPENINGS - TOLERANCES FOR GENERAL USE
DIN EN ISO 14581 : 2014	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
I.S. EN ISO 286-1:2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010)
DIN ISO 8764-2 E : 2006	ASSEMBLY TOOLS FOR SCREWS AND NUTS - SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS - PART 2: GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS
I.S. EN ISO 8434-1:2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
DIN EN ISO 7380-2 : 2011	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR (ISO 7380-2:2011)
DIN EN ISO 4766 : 2011	SLOTTED SET SCREWS WITH FLAT POINT (ISO 4766:2011)
ISO 4762 : 2004(R2018)	HEXAGON SOCKET HEAD CAP SCREWS
EN ISO 8434-1 : 2007 COR 2009	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN ISO 13918 : 2018	WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING (ISO 13918:2017)
UNE EN 12952-5 : 2012	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
DIN EN 13565-1 : 2016	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
ISO 12151-6 : 2009(R2016)	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS
ISO 12151-4 : 2007(R2015)	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS
EN ISO 16228 : 2018	FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017)
ISO 10663:2012(R2017)	HEXAGON NUTS WITH FLANGE, STYLE 2 - FINE PITCH THREAD
ISO 7380 : 2004	HEXAGON SOCKET BUTTON HEAD SCREWS
ISO 8434-6 : 2009(R2015)	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING
DIN EN ISO 8434-1 : 2016	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
EN 13565-1 : 2003 + A1 2007	FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
EN 14399-10 : 2018	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
EN ISO 6149-4 : 2017	CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL HEX AND INTERNAL HEX PORT PLUGS (ISO 6149-4:2017)
I.S. EN 14399-8:2007	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
ISO 4775 : 1984	HEXAGON NUTS FOR HIGH STRENGTH STRUCTURAL BOLTING WITH LARGE WIDTH ACROSS FLATS - PRODUCT GRADE B - PROPERTY CLASSES 8 AND 10
ISO 7379 : 1983(R2015)	HEXAGON SOCKET HEAD SHOULDER SCREWS
ISO 8764-2 : 2004(R2019)	ASSEMBLY TOOLS FOR SCREWS AND NUTS - SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS - PART 2: GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS
ISO 8434-2 : 2007(R2018)	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS
EN ISO 4017 : 2014	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
BS EN ISO 8434-1 : 2007	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
I.S. EN ISO 10642:2004	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004)
EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
I.S. EN ISO 3269:2000	FASTENERS - ACCEPTANCE INSPECTION
DIN EN ISO 4035 : 2016	HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B (ISO 4035:2012)
DIN EN ISO 4035 E : 2013	HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B (ISO 4035:2012)
DIN EN ISO 4032 : 2016	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012)
DIN EN ISO 4032 E : 2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012)
DIN EN ISO 7042 : 2016	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012)
DIN EN ISO 7047 : 2011	RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011)
DIN EN ISO 4028 E : 2004	HEXAGON SOCKET SET SCREWS WITH DOG POINT
DIN EN ISO 7048 : 2011	CROSS-RECESSED CHEESE HEAD SCREWS
UNE EN ISO 4017 : 2015	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
DIN EN ISO 4027 E : 2004	HEXAGON SOCKET SET SCREWS WITH CONE POINT
DIN EN ISO 2342 E : 2004	SLOTTED HEADLESS SCREWS WITH SHANK
DIN EN 13411-5 E : 2009	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
DIN EN ISO 4036 E : 2013	HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012)
DIN EN ISO 4029 E : 2004	HEXAGON SOCKET SET SCREWS WITH CUP POINT
DIN EN ISO 4014 E : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
DIN EN ISO 4018 E : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
DIN EN ISO 4034 E : 2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012)
DIN EN ISO 4016 E : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
DIN EN ISO 4017 E : 2015	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
DIN EN ISO 23429 : 2004	GAUGING OF HEXAGON SOCKETS
DIN EN ISO 7719 E : 2013	PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012)
DIN EN 14399-3 : 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
DIN EN ISO 7719 : 2016	PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012)
DIN EN ISO 4026 E : 2004	HEXAGON SOCKET SET SCREWS WITH FLAT POINT
DIN EN ISO 10512 : 2016	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012)
DIN EN ISO 4762 E : 2004	HEXAGON SOCKET HEAD CAP SCREWS
DIN EN ISO 7040 : 2016	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012)
DIN EN ISO 7046-2 E : 2011	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011)
DIN EN ISO 4033 E : 2013	HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012)
DIN EN ISO 6149-3 E : 2007	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS
DIN EN ISO 7045 : 2011	PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7045:2011)
DIN EN ISO 10642 : 2013	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004 + AMD 1:2012)
DIN EN ISO 7046-1 E : 2011	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 1: STEEL SCREWS OF PROPERTY CLASS 4.8 (ISO 7046-1:2011)
DIN EN ISO 9974-3 : 2000-09	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUDS ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: STUD ENDS WITH METAL-TO-METAL SEALING (TYPE B)
DIN EN ISO 6149-3 : 2007	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS
DIN EN 14399-4 : 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
DIN EN ISO 7046-1 : 2011	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 1: STEEL SCREWS OF PROPERTY CLASS 4.8 (ISO 7046-1:2011)
DIN EN ISO 10511 : 2016	PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012)
DIN EN ISO 1207 : 2011	SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A (ISO 1207:2011)
DIN EN 12952-5 : 2012	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
DIN EN ISO 6149-2 : 2007	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
DIN EN ISO 6149-2 E : 2007	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
DIN EN 14399-1 : 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 10513 : 2016	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012)
DIN EN 24015 : 1991	HEXAGON HEAD BOLTS, REDUCED SHANK (SHANK DIAMETER = PITCH DIAMETER) - PRODUCT GRADE B
DIN EN 15048-1 E : 2016	NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 7046-2 : 2011	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011)
DIN EN ISO 4033 : 2016	HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012)
DIN EN ISO 4028 : 2004-05	HEXAGON SOCKET SET SCREWS WITH DOG POINT
DIN EN ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
DIN EN 27436 : 1992-10	SLOTTED SET SCREWS WITH CUP POINT
DIN EN ISO 7040 E : 2013	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012)
DIN EN ISO 1580 E : 2011	SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011)
DIN EN ISO 21670 E : 2004	FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014)
DIN EN 15048-1 : 2016	NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 14579 E : 2011	HEXALOBULAR SOCKET HEAD CAP SCREWS
DIN EN ISO 23429 E : 2004	GAUGING OF HEXAGON SOCKETS
DIN EN ISO 10511 E : 2013	PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012)
DIN EN ISO 2010 : 2011	SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A (ISO 2010:2011)
DIN EN ISO 14583 : 2011	HEXALOBULAR SOCKET PAN HEAD SCREWS
DIN EN ISO 4029 : 2004-05	HEXAGON SOCKET SET SCREWS WITH CUP POINT
DIN EN ISO 14579 : 2011	HEXALOBULAR SOCKET HEAD CAP SCREWS
DIN EN 27435 : 1992-10	SLOTTED SET SCREWS WITH LONG DOG POINT
DIN EN ISO 10512 E : 2013	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012)
DIN EN ISO 14584 : 2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
DIN EN ISO 8676 E : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN 27434 : 1992-10	SLOTTED SET SCREWS WITH CONE POINT
DIN EN ISO 10642 E : 2013	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004 + AMD 1:2012)
DIN EN ISO 8675 E : 2013	HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
DIN EN ISO 2009 : 2011	SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A (ISO 2009:2011)
DIN EN ISO 4027 : 2007-04	HEXAGON SOCKET SET SCREWS WITH CONE POINT
DIN EN ISO 7048 E : 2011	CROSS-RECESSED CHEESE HEAD SCREWS
DIN EN ISO 8673 E : 2013	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
DIN EN ISO 8765 E : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 14580 E : 2011	HEXALOBULAR SOCKET CHEESE HEAD SCREWS
DIN EN ISO 7045 E : 2011	PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7045:2011)
DIN EN ISO 4762 : 2004-06	HEXAGON SOCKET HEAD CAP SCREWS
DIN EN ISO 8674 E : 2013	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
DIN EN ISO 2342 : 2004-05	SLOTTED HEADLESS SCREWS WITH SHANK
DIN EN ISO 14585 : 2011	HEXALOBULAR SOCKET PAN HEAD TAPPING SCREWS
DIN EN ISO 14583 E : 2011	HEXALOBULAR SOCKET PAN HEAD SCREWS
DIN EN ISO 1580 : 2011	SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011)
DIN EN ISO 7047 E : 2011	RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011)
DIN EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
DIN EN ISO 4026 : 2004-05	HEXAGON SOCKET SET SCREWS WITH FLAT POINT
DIN EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
DIN EN ISO 4034 : 2016	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012)
DIN EN ISO 8674 : 2016	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
DIN EN ISO 1207 E : 2011	SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A (ISO 1207:2011)
DIN EN ISO 4036 : 2013	HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012)
DIN EN ISO 14585 E : 2011	HEXALOBULAR SOCKET PAN HEAD TAPPING SCREWS
DIN EN ISO 8675 : 2016	HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
DIN EN ISO 14586 E : 2011	HEXALOBULAR SOCKET COUNTERSUNK HEAD TAPPING SCREWS
DIN EN ISO 4017 : 2015	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
DIN EN ISO 14587 E : 2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
DIN EN ISO 8765 : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
DIN EN ISO 14580 : 2011	HEXALOBULAR SOCKET CHEESE HEAD SCREWS
DIN EN ISO 8673 : 2016	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
DIN EN ISO 10513 E : 2013	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012)
DIN EN ISO 14586 : 2011	HEXALOBULAR SOCKET COUNTERSUNK HEAD TAPPING SCREWS
DIN EN ISO 14587 : 2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
DIN EN ISO 7042 E : 2013	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012)
DIN EN ISO 14584 E : 2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
UNE EN ISO 7050 : 2011	CROSS-RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS (ISO 7050:2011)
UNE EN ISO 14586 : 2011	HEXALOBULAR SOCKET COUNTERSUNK HEAD TAPPING SCREWS (ISO 14586:2011)
BS EN ISO 4027 : 2003	HEXAGON SOCKET SET SCREWS WITH CONE POINT
UNE EN ISO 1207 : 2011	SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A (ISO 1207:2011)
UNE EN ISO 1481 : 2011	SLOTTED PAN HEAD TAPPING SCREWS (ISO 1481:2011)
BS EN ISO 23429 : 2004	GAUGING OF HEXAGON SOCKETS
DIN EN ISO 21670 : 2014	FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014)
UNE EN ISO 4033 : 2013	HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012)
BS EN ISO 1479 : 2011	HEXAGON HEAD TAPPING SCREWS
BS EN ISO 4762 : 2004	HEXAGON SOCKET HEAD CAP SCREWS
ISO 4029 : 2003(R2018)	HEXAGON SOCKET SET SCREWS WITH CUP POINT
UNE EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B (ISO 4014:2011)
BS EN ISO 7045 : 2011	PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
BS EN ISO 4029 : 2003	HEXAGON SOCKET SET SCREWS WITH CUP POINT
BS EN ISO 15482 : 1999	CROSS RECESSED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
UNE EN ISO 7045 : 2012	PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7045:2011)
UNE EN ISO 7042 : 2013	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012)
BS EN ISO 4034 : 2012	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C
UNE EN ISO 7040 : 2013	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012)
ISO 1481 : 2011(R2016)	SLOTTED PAN HEAD TAPPING SCREWS
ISO 14584 : 2011(R2016)	HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
BS EN 24766 : 1992	SLOTTED SET SCREWS WITH FLAT POINT
UNE EN ISO 14583 : 2011	HEXALOBULAR SOCKET PAN HEAD SCREWS (ISO 14583:2011)
BS EN ISO 7046-1 : 2011	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 1: STEEL OF PROPERTY CLASS 4.8 (ISO 7046-1:2011)
ISO 2010 : 2011(R2016)	SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A
UNE EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C (ISO 4016:2011)
UNE EN ISO 10511 : 2013	PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012)
BS EN ISO 2009 : 2011	SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A
UNE EN ISO 14587 : 2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS (ISO 14587:2011)
BS EN ISO 21670 : 2014	FASTENERS - HEXAGON WELD NUTS WITH FLANGE
BS EN ISO 10642 : 2004	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS
BS EN ISO 2342 : 2003	SLOTTED HEADLESS SCREWS WITH SHANK
BS EN 1661 : 1998	HEXAGON NUTS WITH FLANGE (ISO 4161:1996, MODIFIED)
BS EN 14399-3 : 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
ISO 1483 : 2011(R2016)	SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
ISO 15483 : 1999(R2014)	CROSS RECESSED RAISED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
BS EN ISO 10512 : 2012	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10
UNE EN ISO 14579 : 2011	HEXALOBULAR SOCKET HEAD CAP SCREWS (ISO 14579:2011)
UNE EN ISO 7049 : 2011	CROSS-RECESSED PAN HEAD TAPPING SCREWS (ISO 7049:2011)
BS EN ISO 10511 : 2012	PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT)
BS EN 27436 : 1992	SLOTTED SET SCREWS WITH CUP POINT
BS EN ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
BS EN ISO 3269 : 2001	FASTENERS - ACCEPTANCE INSPECTION
ISO 7045 : 2011(R2011)	PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
UNE EN ISO 4035 : 2013	HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B (ISO 4035:2012)
ISO 7042 : 2012(2017)	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12
UNE EN ISO 7047 : 2012	RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011)
BS EN ISO 8673 : 2012	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ISO 4017 : 2014	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B
ISO 4028 : 2003(R2018)	HEXAGON SOCKET SET SCREWS WITH DOG POINT
BS EN ISO 4028 : 2003	HEXAGON SOCKET SET SCREWS WITH DOG POINT
BS EN ISO 9974-3 : 2000	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: STUD ENDS WITH METAL-TO-METAL SEALING (TYPE B)
DIN EN 14399-4 E : 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
BS EN ISO 7042 : 2012	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12
BS EN ISO 21269 : 2004	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
UNE EN ISO 1580 : 2012	SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011)
UNE EN ISO 1483 : 2011	SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS (ISO 1483:2011)
BS EN 27435 : 1992	SLOTTED SET SCREWS WITH LONG DOG POINT
BS EN ISO 1483 : 2011	SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
UNE EN ISO 7048 : 2011	CROSS-RECESSED CHEESE HEAD SCREWS (ISO 7048:2011)
UNE EN ISO 4034 : 2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012)
BS EN ISO 10513 : 2012	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12
BS EN ISO 6149-3 : 2007	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS
BS EN 1664 : 1998	PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS WITH FLANGE (ISO 7044:1997, MODIFIED)
UNE EN ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C (ISO 4018:2011)
UNE EN ISO 14584 : 2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS (ISO 14584:2011)
BS EN ISO 9974-1 : 2000	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS
UNE EN ISO 10512 : 2013	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012)
BS EN 13280 : 2001	SPECIFICATION FOR GLASS FIBRE REINFORCED CISTERNS OF ONE PIECE AND SECTIONAL CONSTRUCTION, FOR THE STORAGE, ABOVE GROUND, OF COLD WATER
BS EN ISO 7051 : 2011	CROSS-RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
ONORM EN ISO 10642 : 2013	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004+AMD 1:2012)
BS EN ISO 4033 : 2012	HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B
UNE EN ISO 8673 : 2013	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012)
BS EN 15048-1 : 2007	NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
ISO 10642 : 2004(R2008)	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS
UNE EN ISO 7046-1 : 2012	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 1: STEEL OF PROPERTY CLASS 4.8 (ISO 7046-1:2011)
ISO 7049 : 2011(R2016)	CROSS-RECESSED PAN HEAD TAPPING SCREWS
UNE EN ISO 2010 : 2012	SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A (ISO 2010:2011)
BS EN ISO 7047 : 2011	RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011)
BS EN 1665 : 1997	HEXAGON BOLTS WITH FLANGE - HEAVY SERIES
BS EN ISO 4036 : 2012	HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B
BS EN 14399-1 : 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
BS EN ISO 4032 : 2012	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B
BS EN ISO 14585 : 2011	HEXALOBULAR SOCKET PAN HEAD TAPPING SCREWS
BS EN ISO 8434-4 : 2000	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
UNE EN ISO 4032 : 2013	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012)
DIN EN 14399-1 E : 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
BS EN ISO 1482 : 2011	SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
BS EN ISO 7719 : 2012	PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10
BS EN ISO 1481 : 2011	SLOTTED PAN HEAD TAPPING SCREWS
BS EN 14218 : 2003	HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD
ISO 8673 : 2012(R2017)	HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
BS EN ISO 14579 : 2011	HEXALOBULAR SOCKET HEAD CAP SCREWS
BS EN 1662 : 1998	HEXAGON BOLTS WITH FLANGE - SMALL SERIES (ISO/DIS 15071:1996, MODIFIED)
ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
DIN EN ISO 2010 E : 2011	SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A (ISO 2010:2011)
UNE EN ISO 10513 : 2013	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012)
BS EN ISO 9974-2 : 2000	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
ISO 15481 : 1999(R2014)	CROSS RECESSED PAN HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
BS EN 1667 : 1998	PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS WITH FLANGE WITH METRIC FINE PITCH THREAD (ISO 12126:1997, MODIFIED)
BS EN ISO 8675 : 2012	HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
BS EN ISO 6149-2 : 2007	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
ISO 1179-4 : 2007(R2015)	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
BS EN ISO 2010 : 2011	SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A
ISO 21670 : 2014	FASTENERS - HEXAGON WELD NUTS WITH FLANGE
BS EN ISO 4026 : 2003	HEXAGON SOCKET SET SCREWS WITH FLAT POINT
BS EN 1666 : 1998	PREVAILING TORQUE TYPE HEXAGON NUTS WITH FLANGE (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD (ISO 12125:1997, MODIFIED)
BS EN ISO 7040 : 2012	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012)
BS EN 13411-5 : 2003	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
ISO 3269 : 2000(R2010)	FASTENERS - ACCEPTANCE INSPECTION
ISO 15482 : 1999(R 2014)	CROSS RECESSED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
DIN EN 12952-5 E : 2012	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
ISO 4035 : 2012(R2017)	HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B
ISO 14579 : 2011(R2016)	HEXALOBULAR SOCKET HEAD CAP SCREWS
ISO 4033 : 2012(R2017)	HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B
BS EN ISO 15483 : 1999	CROSS RECESSED RAISED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
BS EN ISO 14584 : 2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
BS EN ISO 4035 : 2012	HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B
BS EN 1663 : 1998	PREVAILING TORQUE TYPE HEXAGON NUTS WITH FLANGE (WITH NON-METALLIC INSERT) (ISO 7043:1997, MODIFIED)
ISO 14582 : 2013(R2018)	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD
BS EN ISO 7046-2 : 2011	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011)
BS EN 14219 : 2003	HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES
BS EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
BS EN ISO 7050 : 2011	CROSS-RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
BS EN ISO 14586 : 2011	HEXALOBULAR SOCKET COUNTERSUNK HEAD TAPPING SCREWS
BS EN ISO 1207 : 2011	SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
BS EN ISO 4016 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADE C
BS EN 12952-5 : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
ISO 4034 : 2012(R2017)	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C
ISO 14586 : 2011(R2016)	HEXALOBULAR SOCKET COUNTERSUNK HEAD TAPPING SCREWS
UNE EN ISO 7046-2 : 2012	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011)
UNE EN ISO 8675 : 2013	HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012)
BS EN ISO 7380 : 2004	HEXAGON SOCKET BUTTON HEAD SCREWS
ISO 14587 : 2011(R2016)	HEXALOBULAR SOCKET RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
BS EN ISO 8674 : 2012	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
BS EN 27434 : 1992	SLOTTED SET SCREWS WITH CONE POINT
ISO 12474 : 2010	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
ISO 1179-3 : 2007(R2016)	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
UNE EN ISO 14580 : 2011	HEXALOBULAR SOCKET CHEESE HEAD SCREWS (ISO 14580:2011)
BS EN ISO 7048 : 2011	CROSS RECESSED CHEESE HEAD SCREWS
ISO 691 : 2005(R2014)	ASSEMBLY TOOLS FOR SCREWS AND NUTS - WRENCH AND SOCKET OPENINGS - TOLERANCES FOR GENERAL USE
DIN EN 13411-5 : 2009	TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
ISO 7051 : 2011(R2016)	CROSS-RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
ISO 23429 : 2004(R2018)	GAUGING OF HEXAGON SOCKETS
UNE EN ISO 7051 : 2011	CROSS-RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS (ISO 7051:2011)
ISO 9974-3 : 1996(R2018)	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3 - STUD ENDS WITH METAL-TO-METAL SEALING (TYPE B)
UNE EN ISO 14585 : 2011	HEXALOBULAR SOCKET PAN HEAD TAPPING SCREWS (ISO 14585:2011)
ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ISO 7380-1 : 2011(R2016)	BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
ISO 2342 : 2003(R2018)	SLOTTED HEADLESS SCREWS WITH SHANK
ISO 2009 : 2011(R2016)	SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A
BS EN ISO 15481 : 1999	CROSS RECESSED PAN HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
ISO 7046-1 : 2011(R2016)	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 1: STEEL SCREWS OF PROPERTY CLASS 4.8
DIN EN ISO 2009 E : 2011	SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A (ISO 2009:2011)
BS EN ISO 14587 : 2011	HEXALOBULAR SOCKET RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS
ISO 4014 : 2011	HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
ISO 4766 : 2011(R2016)	SLOTTED SET SCREWS WITH FLAT POINT
ISO 14581 : 2013(R2018)	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS
ISO 1482 : 2011(R2016)	SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
ISO 4032 : 2012(R2017)	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B
ISO 7719 : 2012(R2017)	PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10
ISO 4036 : 2012	HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B
BS EN ISO 7049 : 2011	CROSS-RECESSED PAN HEAD TAPPING SCREWS
ISO 9974-2 : 1996(R2018)	CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 261 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2 - STUD ENDS WITH ELASTOMERIC SEALING (TYPE E)
UNE EN ISO 8765 : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8765:2011)
ISO 21269 : 2004	HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
ISO 10511 : 2012(R2017)	PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT)
ISO 7046-2 : 2011(R2016)	COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS
ISO 7050 : 2011(R2016)	CROSS-RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS
ISO 7380-2 : 2011(R2016)	BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
ISO 1207 : 2011	SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
ISO 14580 : 2011(R2016)	HEXALOBULAR SOCKET CHEESE HEAD SCREWS
BS EN ISO 1580 : 2011	SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011)
BS EN ISO 4017 : 2014	FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
ISO 10513 : 2012(R2017)	PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12
ISO 8674 : 2012(R2017)	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ISO 1580 : 2011(R2016)	SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A
ISO 14583 : 2011(R2016)	HEXALOBULAR SOCKET PAN HEAD SCREWS
BS EN ISO 14583 : 2011	HEXALOBULAR SOCKET PAN HEAD SCREWS
ISO 6149-2 : 2006(R2015)	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 2: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR HEAVY-DUTY (S SERIES) STUD ENDS
ISO 7040 : 2012(R2017)	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10
ISO 8675 : 2012(R2017)	HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
BS EN 14399-4 : 2005	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
ISO 1479 : 2011(R2016)	HEXAGON HEAD TAPPING SCREWS
ISO 4026 : 2003(R2018)	HEXAGON SOCKET SET SCREWS WITH FLAT POINT
UNE EN ISO 1479 : 2011	HEXAGON HEAD TAPPING SCREWS (ISO 1479:2011)
UNE EN ISO 7719 : 2013	PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012)
UNE EN ISO 8676 : 2011	HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8676:2011)
ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
ISO 10512 : 2012(R2017)	PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10
ISO 8765 : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
ISO 7047 : 2011(R2016)	RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
UNE EN ISO 14582 : 2015-12	FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
ISO 6149-3 : 2006(R2015)	CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 3: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR LIGHT-DUTY (L SERIES) STUD ENDS
BS EN ISO 14580 : 2011	HEXALOBULAR SOCKET CHEESE HEAD SCREWS
I.S. EN ISO 15480:1999	HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
ISO 4027 : 2003(R2018)	HEXAGON SOCKET SET SCREWS WITH CONE POINT
BS EN ISO 8765 : 2011	HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
UNE EN ISO 8674 : 2013	HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012)
ISO 7048 : 2011(R2016)	CROSS-RECESSED CHEESE HEAD SCREWS
ISO 8434-4 : 1995	METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
BS EN ISO 4018 : 2011	HEXAGON HEAD SCREWS - PRODUCT GRADE C
ISO 14585 : 2011(R2016)	HEXALOBULAR SOCKET PAN HEAD TAPPING SCREWS
UNE EN ISO 1482 : 2011	SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS (ISO 1482:2011)
DIN EN 14399-3 E : 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
BS EN ISO 15480 : 1999	HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD
UNE EN ISO 2009 : 2012	SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A (ISO 2009:2011)

Standards Referencing This Book - (Show below) - (Hide below)

ISO 8015 : 2011(R2016)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
AS/NZS ISO 13918:2020	Welding - Studs and ceramic ferrules for arc stud welding
ISO 885 : 2000(R2016)	GENERAL PURPOSE BOLTS AND SCREWS - METRIC SERIES - RADII UNDER THE HEAD
ISO 1479 : 2011(R2016)	HEXAGON HEAD TAPPING SCREWS
ISO 4042 : 1999	FASTENERS - ELECTROPLATED COATINGS
ISO 2692 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
ISO 10642 : 2004(R2008)	HEXAGON SOCKET COUNTERSUNK HEAD SCREWS
ISO 1101 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT
ISO 7721 : 1983(R2014)	COUNTERSUNK HEAD SCREWS - HEAD CONFIGURATION AND GAUGING
ISO 10509 : 2012(R2017)	HEXAGON FLANGE HEAD TAPPING SCREWS
ISO 7053 : 2011(R2016)	HEXAGON WASHER HEAD TAPPING SCREWS
ISO 225 : 2010(R2015)	FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - SYMBOLS AND DESCRIPTIONS OF DIMENSIONS
ISO 4032 : 2012(R2017)	HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B
ISO 286-1 : 2010(R2015)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS
ISO 286-2 : 2010(R2015)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
ISO 10664 : 2014	HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS
ISO 965-3 : 1998(R2014)	ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 3: DERIVATIONS FOR CONSTRUCTIONAL SCREW THREADS
ISO 1478 : 1999(R2014)	TAPPING SCREWS THREAD
ISO 4757 : 1983(R2018)	CROSS RECESSES FOR SCREWS

Add To Cart

Product Format

Quantity

add to cart

ISO 4759-1 : 2000(R2017)

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?