ISO 5149-2:2014
Current
Current
The latest, up-to-date edition.
Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
04-08-2014
ISO 5149-2:2014 is applicable to the design, construction, and installation of refrigerating systems, including piping, components, materials, and ancillary equipment directly associated with such systems, which are not covered in ISO 5149‑1, ISO 5149‑3, or ISO 5149‑4. It also specifies requirements for testing, commissioning, marking, and documentation. Requirements for secondary heat-transfer circuits are excluded except for any safety devices associated with the refrigerating system.
ISO 5149-2:2014 is applicable to new refrigerating systems, extensions or modifications of already existing systems, and for used systems, being transferred to and operated on another site.
ISO 5149-2:2014 applies to: a) refrigerating systems, stationary or mobile, of all sizes including heat pumps; b) secondary cooling or heating systems; c) the location of the refrigerating systems; and d)replaced parts and added components after the adoption of this part of ISO 5149, if they are not identical in function and in capacity.
ISO 5149-2:2014 does not cover "motor vehicle air conditioners". It does not apply to goods in storage, with respect to spoilage or contamination, but it also applies in the case of the conversion of a system for another refrigerant.
| DevelopmentNote |
Supersedes ISO/DIS 5149-2. Together with ISO 5149-1, ISO 5149-3, and ISO 5149-4, supersedes ISO 5149. (04/2014) NEW CHILD AMD 1 2020 IS ADDED
|
| DocumentType |
Standard
|
| Pages |
61
|
| ProductNote |
THIS STANDARD ALSO REFERS TO IEC 60721 NEW CHILD AMD 1 2020 IS ADDED
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 5149-2:2014 | Identical |
| IS 16678 : Part 2 : 2018 | Identical |
| NEN ISO 5149-2 : 2014 | Identical |
| I.S. EN 16902:2016 | COMMERCIAL BEVERAGE COOLERS - CLASSIFICATION, REQUIREMENTS AND TEST CONDITIONS |
| 15/30325845 DC : 0 | BS EN 16901 - ICE-CREAM FREEZERS - CLASSIFICATION, REQUIREMENTS AND TEST CONDITIONS |
| ISO 5149-1:2014 | Refrigerating systems and heat pumps — Safety and environmental requirements — Part 1: Definitions, classification and selection criteria |
| 15/30317315 DC : 0 | BS EN 16838 - REFRIGERATED DISPLAY SCOOPING CABINETS FOR GELATO - CLASSIFICATION, REQUIREMENTS AND TEST CONDITIONS |
| I.S. EN 16838:2016 | REFRIGERATED DISPLAY SCOOPING CABINETS FOR GELATO - CLASSIFICATION, REQUIREMENTS AND TEST CONDITIONS |
| IEC 60335-2-40:2018 | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| ISO 5149-3:2014 | Refrigerating systems and heat pumps — Safety and environmental requirements — Part 3: Installation site |
| UNE-EN 16901:2018 | Ice-cream freezers - Classification, requirements and test conditions |
| BS EN 16838:2016 | Refrigerated display scooping cabinets for gelato. Classification, requirements and test conditions |
| IEC 60335-2-40:2018 RLV | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| BS EN 16901:2016 | Ice-cream freezers. Classification, requirements and test conditions |
| BS ISO 5149-1 : 2014 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA |
| 16/30338439 DC : 0 | BS EN ISO 14903 - REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS |
| BS ISO 13612-1:2014 | Heating and cooling systems in buildings. Method for calculation of the system performance and system design for heat pump systems Design and dimensioning |
| I.S. EN 16901:2016 | ICE-CREAM FREEZERS - CLASSIFICATION, REQUIREMENTS AND TEST CONDITIONS |
| EN 16838:2016 | Refrigerated display scooping cabinets for gelato - Classification, requirements and test conditions |
| IEC 60335-2-40 REDLINE : 6.0 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| I.S. EN ISO 23953-2:2015 | REFRIGERATED DISPLAY CABINETS - PART 2: CLASSIFICATION, REQUIREMENTS AND TEST CONDITIONS (ISO 23953-2:2015) |
| DIN EN ISO 23953-2:2016-03 | REFRIGERATED DISPLAY CABINETS - PART 2: CLASSIFICATION, REQUIREMENTS AND TEST CONDITIONS (ISO 23953-2:2015) |
| ISO 14903:2017 | Refrigerating systems and heat pumps — Qualification of tightness of components and joints |
| UNE-EN 16838:2017 | Refrigerated display scooping cabinets for gelato - Classification, requirements and test conditions |
| EN ISO 14903:2017 | Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO 14903:2017) |
| PREN 50597 : DRAFT 2017 | ENERGY CONSUMPTION OF VENDING MACHINES |
| 17/30359728 DC : 0 | BS EN 50597 - ENERGY CONSUMPTION OF VENDING MACHINES |
| BS ISO 5149-3:2014 | Refrigerating systems and heat pumps. Safety and environmental requirements Installation site |
| ISO 5149-4:2014 | Refrigerating systems and heat pumps — Safety and environmental requirements — Part 4: Operation, maintenance, repair and recovery |
| BS EN 16902:2016 | Commercial beverage coolers. Classification, requirements and test conditions |
| UNE-EN ISO 23953-2:2016 | Refrigerated display cabinets - Part 2: Classification, requirements and test conditions (ISO 23953-2:2015) |
| ISO 23953-2:2015 | Refrigerated display cabinets — Part 2: Classification, requirements and test conditions |
| BS EN ISO 23953-2:2015 | Refrigerated display cabinets Classification, requirements and test conditions |
| EN ISO 23953-2:2015 | Refrigerated display cabinets - Part 2: Classification, requirements and test conditions (ISO 23953-2:2015) |
| EN 16901:2016 | Ice-cream freezers - Classification, requirements and test conditions |
| BS EN ISO 14903:2017 | Refrigerating systems and heat pumps. Qualification of tightness of components and joints |
| 15/30325848 DC : 0 | BS EN 16902 - COMMERCIAL BEVERAGE COOLERS - CLASSIFICATION, REQUIREMENTS AND TEST CONDITIONS |
| I.S. EN ISO 14903:2017 | REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS (ISO 14903:2017) |
| ISO 13612-1:2014 | Heating and cooling systems in buildings Method for calculation of the system performance and system design for heat pump systems Part 1: Design and dimensioning |
| EN 16902:2016 | Commercial beverage coolers - Classification, requirements and test conditions |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers |
| ISO 4126-1:2013 | Safety devices for protection against excessive pressure — Part 1: Safety valves |
| ISO 14903:2017 | Refrigerating systems and heat pumps — Qualification of tightness of components and joints |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 1092-3:2003/AC:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
| IEC 60335-2-40:2013+AMD1:2016 CSV | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditionersand dehumidifiers |
| IEC 60730-2-6:2015 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| ISO 5149-4:2014 | Refrigerating systems and heat pumps — Safety and environmental requirements — Part 4: Operation, maintenance, repair and recovery |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 5149-1:2014 | Refrigerating systems and heat pumps — Safety and environmental requirements — Part 1: Definitions, classification and selection criteria |
| IEC 60335-2-34:2012+AMD1:2015+AMD2:2016 CSV | Household and similar electrical appliances - Safety - Part 2-34:Particular requirements for motor-compressors |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| EN 14276-2:2007+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
| EN 13136:2013 | Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| ISO 5149-3:2014 | Refrigerating systems and heat pumps — Safety and environmental requirements — Part 3: Installation site |
| EN 13313:2010 | Refrigerating systems and heat pumps - Competence of personnel |
| ISO 13971:2012 | Refrigeration systems and heat pumps — Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes — Requirements and classification |
| ISO 817:2014 | Refrigerants Designation and safety classification |
| ASHRAE 15 : 2013 | SAFETY STANDARD FOR REFRIGERATION SYSTEMS |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| IEC 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| IEC 60335-2-89:2010+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor |
US$225.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.