ISO 5459 : 2011(R2018)

Current

Current The latest, up-to-date edition.

Preview

GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS

Publisher: International Organization for Standardization

Published: 01-01-2011

Available Formats: PDF - Russian, Hardcopy - Russian, PDF - English, Hardcopy - English, PDF - French, Hardcopy - French
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Role of datums
6 General concepts
7 Graphical language
Annex A (normative) - Association for datums
Annex B (informative) - Invariance classes
Annex C (informative) - Examples
Annex D (informative) - Former practices
Annex E (informative) - Examples of a datum system or a
common datum established with contacting features
Annex F (normative) - Relations and dimensions of graphical
symbols
Annex G (informative) - Relationship to the GPS matrix model
Bibliography

Abstract - (Show below) - (Hide below)

Describes terminology, rules and methodology for the indication and understanding of datums and datum systems in technical product documentation.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Revision
Status	Current
Publisher	International Organization for Standardization
ProductNote	THIS STANDARD ALSO REFERS TO ISO 1101:2004/Amd 1
Pages
ISBN
Committee	TC 213
Supersedes	ISO 5459 : 1981

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN ISO 5459 : 2011	Identical
NF EN ISO 5459 : 2011	Identical
NBN EN ISO 5459 : 2011	Identical
NEN EN ISO 5459 : 2011	Identical
NS EN ISO 5459 : 2011	Identical
PN EN ISO 5459 : 2011	Identical
SN EN ISO 5459 : 2011	Identical
UNI EN ISO 5459 : 2011	Identical
UNE EN ISO 5459 : 2012	Identical
EN ISO 5459 : 2011	Identical
DIN EN ISO 5459 : 2013	Identical
DS EN ISO 5459 : 2011	Identical
NEN ISO 5459 : 1984	Identical
BS 308-3(1972) : 1972	Similar to
BS ISO 5459 : 1981	Identical
DIN EN ISO 5459 : 2016	Identical
DIN EN ISO 5459 E : 2013	Identical
SANS 10111-2-2 : 1993 AMD 1 2009	Identical
BS EN ISO 5459 : 2011	Identical
NS EN ISO 5459 : 2011	Identical
UNE 1128 : 1995	Identical
NS 1428 : 1ED 1982	Identical
DS ISO 5459 : 1982	Identical
DIN EN ISO 5459 : 2013	Identical
NBN EN ISO 5459 : 2011	Identical
DIN ISO 5459 : 1982-01	Identical
BS 308-3(1990) : 1990	Similar to
BIS IS 10721 : 1983(R1999)	Identical
SN EN ISO 5459 : 2011	Identical
PN EN ISO 5459 : 2011	Identical
UNE EN ISO 5459 : 2012	Identical
SN ISO 5459 : 1991	Identical
UNI ISO 5459 : 1986	Identical
NEN EN ISO 5459 : 2011	Identical
I.S. EN ISO 5459:2011	Identical
NF EN ISO 5459 : 2011	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN ISO 10579 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
DIN ISO 8062 : 1998	CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES
DIN 5480-15 E : 2006	INVOLUTE SPLINES BASED ON REFERENCE DIAMETERS - PART 15: INSPECTION
DIN EN ISO 10135 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
DIN SPEC 91184 E : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
17/30348149 DC : 0	BS ISO 3096 - ROLLING BEARINGS - NEEDLE ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
DIN ISO 8062 E : 1998	CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES
16/30341970 DC : 0	BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
BS 308-2.3(1996) : 1996	TECHNICAL DRAWINGS - DIMENSIONING AND TOLERANCING OF PROFILES
12/30259955 DC : 0	BS EN 61754-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE
ONORM EN ISO 14978 : 2008	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
17/30348146 DC : 0	BS ISO 7063 - ROLLING BEARINGS - NEEDLE ROLLER BEARING TRACK ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
BS IEC 60191-1 : 2007	MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
99/702254 DC : DRAFT JAN 1999	ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE
DIN EN ISO 10135 E : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
BS CECC22000(1993) : 1993	HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION: RADIO FREQUENCY COAXIAL CONNECTORS (PART 1, 2 AND 3)
ISO 10303-519 : 2000(R2018)	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 519 - APPLICATION INTERPRETED CONSTRUCT: GEOMETRIC TOLERANCES
BS ISO 10110-6 : 2015	OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES
13/30284676 DC : 0	BS EN ISO 1660 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING
EN ISO 17450-4 : 2018	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING GPS DEVIATIONS (ISO 17450-4:2017)
CEI EN 60191-1 : 2008	MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
DIN EN ISO 8062-3 E : 2008	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
BS EN ISO 10135 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
BS PD ISO/TS 17863 : 2013	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - GEOMETRICAL TOLERANCING OF MOVEABLE ASSEMBLIES
DIN ISO 2768-2 : 1991-04	GENERAL TOLERANCES - GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCES INDICATIONS
DIN ISO 128-22 : 1999	TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 22: BASIC CONVENTIONS AND APPLICATIONS FOR LEADER LINES AND REFERENCE LINES
EN IEC 60191-1 : 2018	MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES (IEC 60191-1:2018)
BS ISO 2692 : 1988	TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL PRINCIPLE
DIN EN ISO 10579 E : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
12/30268851 DC : 0	BS EN 9300-120 - AEROSPACE SERIES - LOTAR - LONG TERM ARCHIVING AND RETRIEVAL OF DIGITAL TECHNICAL PRODUCT DOCUMENTATION SUCH AS 3D, CAD AND PDM DATA - PART 120: CAD 3D EXPLICIT GEOMETRY WITH PRODUCT AND MANUFACTURING INFORMATION
DIN EN ISO 1660 : 2017-09	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017)
DIN ISO 16792 E : 2008	TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
DIN EN ISO 5458 : 2016	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
ISO TR 16570 : 2004	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - LINEAR AND ANGULAR DIMENSIONING AND TOLERANCING: +/- LIMIT SPECIFICATIONS - STEP DIMENSIONS, DISTANCES, ANGULAR SIZES AND RADII
DIN EN ISO 14638 : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
UNI CEN ISO/TS 8062-2 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
BS ISO 10110-19 : 2015	OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: GENERAL DESCRIPTION OF SURFACES AND COMPONENTS
BS EN ISO 10579 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS
12/30230676 DC : 0	BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
DIN CEN ISO/TS 8062-2 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
ISO 10303-238 : 2007(R2012)	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 238: APPLICATION PROTOCOL: APPLICATION INTERPRETED MODEL FOR COMPUTERIZED NUMERICAL CONTROLLERS
I.S. EN ISO 10579:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
DIN ISO 10110-19 E : 2016	OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: GENERAL DESCRIPTION OF SURFACES AND COMPONENTS (ISO 10110-19:2015)
BS EN ISO 8015 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
DIN ISO 2768-1 : 1991-06	GENERAL TOLERANCES - TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
05/30107533 DC : DRAFT JUL 2005	ISO 10303-224 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224: APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES
13/30272252 DC : 0	BS ISO 10110-6 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES
DIN ISO 7465 E : 2003	PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
BS ISO 128-22 : 1999	TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 22: BASIC CONVENTIONS AND APPLICATIONS FOR LEADER LINES AND REFERENCE LINES
BS ISO 8062-4 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 4: GENERAL TOLERANCES FOR CASTINGS USING PROFILE TOLERANCING IN A GENERAL DATUM SYSTEM
DIN EN ISO 8015 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
BS ISO 1099 : 2017	METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE-CONTROLLED METHOD
BS PD CEN ISO/TS 8062-2 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
BS EN ISO 17450-3 : 2016	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES (ISO 17450-3:2016)
DIN ISO 16792 : 2008	TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
DIN ISO 10110-6 E : 2016	OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES (ISO 10110-6:2015)
DIN ISO 1101 : 1985	TECHNICAL DRAWINGS, GEOMETRICAL TOLERANCING, TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUNOUT - GENERALITIES, DEFINITIONS, SYMBOLS ON DRAWINGS
BS ISO 8788 : 2000	AEROSPACE - NUTS, METRIC - TOLERANCES OF FORM AND POSITION
09/30200834 DC : 0	BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
DIN EN ISO 8062-3 : 2008	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
CEI EN 61754-1 : 2014	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE
15/30295117 DC : 0	BS EN ISO 5458 - GEOMENTRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL AND PATTERN TOLERANCING
17/30341082 DC : 0	BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
BS 6615(1985) : 1985	SPECIFICATION FOR DIMENSIONAL TOLERANCE FOR METAL AND METAL ALLOY CASTINGS
BS ISO 10579 : 2010	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS
BS EN ISO 5459 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
BS EN ISO 14638 : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL
DIN 406-11 E : 1992	ENGINEERING DRAWING PRACTICE - DIMENSIONING - PRINCIPLES OF APPLICATION
DIN EN ISO 14638 E : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
BS EN 61169-1 : 2013	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
BS 308-3(1990) : 1990	ENGINEERING DRAWING PRACTICE - RECOMMENDATIONS FOR GEOMETRICAL TOLERANCING
DIN ISO 5458 : 1988	TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
UNI EN ISO 8015 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
BS EN 61754-1 : 2013	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE
BS 308-3.6(1995) : 1995	TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS
UNE EN ISO 17450-3 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES (ISO 17450-3:2016)
BS 308-1(1984) : 1984	ENGINEERING DRAWING PRACTICE - RECOMMENDATIONS FOR GENERAL PRINCIPLES
DIN EN ISO 5459 E : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS (ISO 5459:2011)
BS ISO 23788 : 2012	METALLIC MATERIALS - VERIFICATION OF THE ALIGNMENT OF FATIGUE TESTING MACHINES
UNI EN ISO 8062-3 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
DIN ISO 10110-19 : 2016	OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: GENERAL DESCRIPTION OF SURFACES AND COMPONENTS (ISO 10110-19:2015)
DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
I.S. EN ISO 5459:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
BS ISO 10135 : 1994	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
12/30262686 DC : 0	BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
DIN ISO 10110-6 : 2016	OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES (ISO 10110-6:2015)
ISO 10110-19 : 2015	OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: GENERAL DESCRIPTION OF SURFACES AND COMPONENTS
04/30125936 DC : DRAFT NOV 2004	ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS
13/30290462 DC : 0	BS EN 60191-1 - MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
BS ISO 10303-47 : 1997	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - INTEGRATED GENERIC RESOURCE: SHAPE VARIATION TOLERANCES
DIN 406-10 E : 1992	ENGINEERING DRAWING PRACTICE - DIMENSIONING - CONCEPTS AND GENERAL PRINCIPLES
10/30234803 DC : 0	BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
14/30262683 DC : 0	BS ISO 8062-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 4: GENERAL TOLERANCES FOR CASTINGS USING PROFILE TOLERANCING IN A GENERAL DATUM SYSTEM
DIN EN ISO 8015 E : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES (ISO 8015:2011)
DIN 5480-15 : 2009-01	INVOLUTE SPLINES BASED ON REFERENCE DIAMETERS - PART 15: INSPECTION
05/30127444 DC : DRAFT JAN 2005	ISO 10303-238 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 238: APPLICATION PROTOCOL - APPLICATION INTERPRETED MODEL FOR COMPUTERIZED NUMERIC CONTROLLERS
BS EN ISO 8062-3 : 2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
BS ISO 1101 : 1983	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT
I.S. EN ISO 14638:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
BS 6615(1996) : 1996	SPECIFICATION FOR DIMENSIONAL TOLERANCES FOR METAL AND METAL ALLOY CASTINGS
BS ISO TR 10064-3 : 1996	CODE OF INSPECTION PRACTICE - PART 3: RECOMMENDATIONS RELATIVE TO GEAR BLANKS, SHAFT CENTRE DISTANCE AND PARALLELISM OF AXES
13/30253349 DC : 0	BS ISO 10110-19 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: OPTICAL FREEFORM SURFACES
BS ISO 492 : 2014	ROLLING BEARINGS - RADIAL BEARINGS - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
UNI EN ISO 10135 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
BIS IS 2102-2 : 1993(R2014)	GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
08/30184522 DC : DRAFT JUNE 2008	BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS
BS ISO 16792 : 2006	TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
BS ISO 4156-3 : 2005	STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION
DIN EN ISO 1660 E : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017)
DIN 406-12 E : 1992	ENGINEERING DRAWING PRACTICE - DIMENSIONING - TOLERANCING OF LINEAR AND ANGULAR DIMENSIONS
EN ISO 5458 : 1998	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING (ISO 5458:1998)
ISO 23788 : 2012(R2018)	METALLIC MATERIALS - VERIFICATION OF THE ALIGNMENT OF FATIGUE TESTING MACHINES
DIN SPEC 91184 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
DIN 406-10 : 1992-12	TECHNICAL DRAWINGS; DIMENSIONING; DEFINITIONS, GENERAL PRINCIPLES
I.S. EN ISO 17450-4:2018	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING GPS DEVIATIONS (ISO 17450-4:2017)
17/30346164 DC : 0	BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
UNI ISO 10579 : 1995	TECHNICAL DRAWINGS - DIMENSIONS AND TOLERANCING - NON-RIGID-PARTS
BS EN ISO 5458 : 1999	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
I.S. EN ISO 10135:2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
I.S. EN ISO 5458:1999	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
UNE-EN ISO 10579:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
I.S. EN IEC 60191-1:2018	MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
NF ISO 4156-3 : 2006	STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION
SR CEN ISO/TS 8062-2:2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
NF ISO 128-1 : 2003	TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 1: INTRODUCTION AND INDEX
BS EN ISO 14405-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
I.S. EN 60191-1:2007	MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
I.S. EN ISO 14405-2:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
UNI EN ISO 14405-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
PREN 1559-1 : DRAFT 2009	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
UNE EN ISO 8015 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES (ISO 8015:2011)
ISO 1099 : 2017	METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE-CONTROLLED METHOD
ISO 10110-6 : 2015	OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES
ISO 16792 : 2015	TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
BS EN ISO 14978 : 2006	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
I.S. EN ISO 8015:2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
EN ISO 14978 : 2006 COR 2008	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
I.S. EN ISO 14978:2006	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
ISO 10303-224 : 2006	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224 - APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES
ISO 10303-214 : 2010	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 214: APPLICATION PROTOCOL: CORE DATA FOR AUTOMOTIVE MECHANICAL DESIGN PROCESSES
UNI ISO 7465 : 2010	PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
DIN EN ISO 14405-2 : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
I.S. EN ISO 17450-3:2016	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS PART 3: TOLERANCED FEATURES (ISO 17450-3:2016)
DIN EN ISO 5459 : 2016	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS (ISO 5459:2011)
DIN EN ISO 14405-2 E : 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
EN ISO 14405-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
BS 308-2(1985) : 1985	ENGINEERING DRAWING PRACTICE - RECOMMENDATIONS FOR DIMENSIONING AND TOLERANCING OF SIZE
IEC 60191-1 : 3.0	MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
NBR ISO 2768-2 : 2001	GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
ISO 14405-2 : 2011	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
PREN ISO 2692 : DRAFT 2012	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012)
UNI EN ISO 10579 : 2013	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS
UNE-EN ISO 14405-2:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
ISO 492 : 2014	ROLLING BEARINGS - RADIAL BEARINGS - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
ISO 14978 : 2006(R2015)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
14/30272936 DC : 0	BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES
ISO 17450-4 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING GPS DEVIATIONS
DIN ISO 2692 : 1990	TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL PRINCIPLE
I.S. EN ISO 8062-3:2007	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
ISO 8062-4 : 2017-07	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 4: GENERAL TOLERANCES FOR CASTINGS USING PROFILE TOLERANCING IN A GENERAL DATUM SYSTEM
ISO 4156-3 : 2005(R2015)	STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION
DIN EN ISO 14978 E : 2006	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
ISO 1206 : 2018	ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
ISO TR 10064-3 : 1996(R2012)	CODE OF INSPECTION PRACTICE - PART 3: RECOMMENDATIONS RELATIVE TO GEAR BLANKS, SHAFT CENTRE DISTANCE AND PARALLELISM OF AXES
ISO TS 17863 : 2013(R2016)	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - GEOMETRICAL TOLERANCING OF MOVEABLE ASSEMBLIES
ISO TR 5460 : 1985	TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - TOLERANCING OF FORM, ORIENTATION, LOCATION AND RUN OUT - VERIFICATION PRINCIPLES AND METHODS - GUIDELINES
ISO 10303-219 : 2007	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 219: APPLICATION PROTOCOL: DIMENSIONAL INSPECTION INFORMATION EXCHANGE
ISO 8788 : 2000(R2013)	AEROSPACE - NUTS, METRIC - TOLERANCES OF FORM AND POSITION
ISO 5458 : 1998	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PATTERN AND COMBINED GEOMETRICAL SPECIFICATION
UNI EN ISO 14978 : 2006	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
I.S. EN 61754-1:2013	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE
I.S. EN 61169-1:2013	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
ISO TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
ISO 10303-223 : 2008	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 223: APPLICATION PROTOCOL: EXCHANGE OF DESIGN AND MANUFACTURING PRODUCT INFORMATION FOR CAST PARTS
ISO 7465 : 2007(R2014)	PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
CEN ISO/TS 8062-2 : 2013 COR 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
EN 61169-1 : 2013 COR 2016	RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
DIN EN 1559-1 E : 2011	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
DIN EN ISO 10360-6 : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
DIN EN 1559-1 : 2011-05	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
DIN EN ISO 1101 E : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017)
DIN EN ISO 10360-6 E : 2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
DIN EN ISO 2692 E : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
DIN EN ISO 2692 : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
DIN EN ISO 14978 : 2006	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
UNE EN 1559-1 : 2011	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
ISO 10579 : 2010(R2015)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS
ISO 1101 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT
BS PD ISO/TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
BS EN ISO 7083 : 1995	TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS
ISO 17450-3 : 2016	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES
BS EN ISO 1101 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017)
BS EN 22768-2 : 1993	GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
ISO 10135 : 2007(R2016)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
IEC 61754-1 : 2.0	FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE
IEC 61169-1 : 2.0	RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
UNE-EN ISO 2692:2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
ISO 8062-3 : 2007(R2016)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
BS EN ISO 2692 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
BS EN 1559-1 : 2011	FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
ISO TS 8062-2 : 2013(R2016)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
ISO 1660 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING
ISO 128-1 : 2003(R2015)	TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 1: INTRODUCTION AND INDEX
ISO 2692 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
BS EN ISO 10360-6 : 2001	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
ISO 2768-2 : 1989(R2017)	GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
ISO 14638 : 2015	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL
ISO 8015 : 2011(R2016)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
BS EN ISO 14660-1 : 2000	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS
BS EN ISO 1660 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017)
ISO 14660-1 : 1999	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS
ISO 7083 : 1983-06	TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS
ISO 10360-6 : 2001(R2017)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
EN ISO 14978 : 2006 COR 2008	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT

Standards Referencing This Book - (Show below) - (Hide below)

ISO TR 14638 : 1995	GEOMETRICAL PRODUCT SPECIFICATION (GPS) - MASTERPLAN
ISO 8015 : 2011(R2016)	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
ISO 1101 : 2004	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT
ISO 2692 : 2014	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
ISO 128-24 : 2014	TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 24: LINES ON MECHANICAL ENGINEERING DRAWINGS
ISO 3098-5 : 1997(R2013)	TECHNICAL PRODUCT DOCUMENTATION - LETTERING - PART 5: CAD LETTERING OF THE LATIN ALPHABET, NUMERALS AND MARKS
ISO 7083 : 1983	TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS
ISO 14253-1 : 2017	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS
ISO 81714-1 : 2010(R2015)	DESIGN OF GRAPHICAL SYMBOLS FOR USE IN THE TECHNICAL DOCUMENTATION OF PRODUCTS - PART 1: BASIC RULES
ISO 2768-2 : 1989	GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
ISO 3098-0 : 1997	TECHNICAL PRODUCT DOCUMENTATION - LETTERING - PART 0: GENERAL REQUIREMENTS
ISO 14660-1 : 1999	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS
ISO 2768-1 : 1989	GENERAL TOLERANCES - PART 1: TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS

Add To Cart

Product Format

Quantity

add to cart

ISO 5459 : 2011(R2018)

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?