ISO 5893:2002
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
07-26-2019
Language(s)
English, French
Published date
06-27-2002
ISO 5893:2002 specifies requirements for tensile-testing systems operating at constant rate of traverse and suitable for testing rubbers, plastics and adhesives, although any one system may only be applicable to a narrower range of materials. It also covers such systems when used for flexural, shear and compression tests.
| DevelopmentNote |
Supersedes ISO/DIS 5893 (07/2002)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF ISO 5893 : 1988 | Identical |
| SANS 5893 : 1ED 2003(R2009) | Identical |
| BS ISO 5893:2002 | Identical |
| NBN EN 12814-6 : 2000 | Identical |
| NBN E 53 101 : 1988 | Identical |
| NBN EN 28033 : 1993 | Identical |
| NEN ISO 5893 : 2002 | Identical |
| PN ISO 5893 : 2015 | Identical |
| UNE-ISO 5893:2012 | Identical |
| NBN EN 26922 : 1993 | Identical |
| NBN EN 1979 : 1999 | Identical |
| NBN EN 12814-2 : 2000 | Identical |
| NBN EN 12814-1 : 2000 COR 2003 | Identical |
| SANS 5893:2003(R2017) | Identical |
| BS 5214-1:1995 | Identical |
| UNE 53417:2001 | Identical |
| SNV ISO 5893 : 1993 | Identical |
| UNI ISO 5893 : 1994 | Identical |
| BS 2000-519(2016) : 2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| BS ISO 5603:2017 | Rubber, vulcanized. Determination of adhesion to wire cord |
| BS ISO 4433-1:1997 | Thermoplastic pipes. Resistance to liquid chemicals. Classification Immersion test method |
| BS ISO 4647:2010 | Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| ISO 34-1:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
| BS ISO 15024:2001 | Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, <i>G</i><sub>ic</sub>, for unidirectionally reinforced materials |
| BS EN 16556:2014 | Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
| DIN EN ISO 20795-2:2013-06 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO 20795-2:2013) |
| DIN EN 16556 E : 2015 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| DIN EN 15870 E : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| 11/30245835 DC : 0 | BS EN 302-1 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| ISO 12817:2013 | Fibre-reinforced plastic composites — Determination of open-hole compression strength |
| BS ISO 5600:2017 | Rubber. Determination of adhesion to rigid materials using conical shaped parts |
| BS ISO 37:2017 | Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties |
| PREN 302-4 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
| BS ISO 18352:2009 | Carbon-fibre-reinforced plastics. Determination of compression-after-impact properties at a specified impact-energy level |
| 09/30193382 DC : 0 | BS ISO 4647 - RUBBER, VULCANIZED - DETERMINATION OF STATIC ADHESION TO TEXTILE CORD - H-PULL TEST |
| 15/30318244 DC : 0 | BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES |
| BS ISO 13586 : 2000 | PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (G[IC] AND K[IC]) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH |
| 04/30091794 DC : DRAFT FEB 2004 | ISO 8033 - RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
| 12/30266398 DC : 0 | BS EN ISO 20795-2 - DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS |
| 15/30317333 DC : 0 | BS EN 205 - ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| 06/30149355 DC : 0 | EN ISO 1798 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK |
| BS EN 14840:2005 | Joint fillers and sealants. Test methods for preformed joint seals |
| BS ISO 814:2017 | Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method |
| NF ISO 4647 : 2010 | RUBBER, VULCANIZED - DETERMINATION OF STATIC ADHESION TO TEXTILE CORD - H-PULL TEST |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| PREN 3793 : 200P1 | AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF STATIC SHEAR STRENGTH |
| PREN 3794 : 200P1 | AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF TORQUE STRENGTH ON THREADED FASTENERS |
| ISO 13262:2010 | Thermoplastics piping systems for non-pressure underground drainage and sewerage Thermoplastics spirally-formed structured-wall pipes Determination of the tensile strength of a seam |
| EN ISO 2411:2017 | Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017) |
| ISO 36:2017 | Rubber, vulcanized or thermoplastic Determination of adhesion to textile fabrics |
| ISO 814:2017 | Rubber, vulcanized or thermoplastic Determination of adhesion to metal Two-plate method |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| DIN EN 13587:2010-10 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| DIN EN ISO 9513 E : 2013 | METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012 + COR 1:2013) |
| IEC 62011-2:2004 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| UNE-EN ISO 6259-1:2015 | Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) |
| BS EN ISO 8033:2017 | Rubber and plastics hoses. Determination of adhesion between components |
| UNE-EN ISO 11339:2010 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| BS EN ISO 604:2003 | Plastics. Determination of compressive properties |
| BS EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of minimum pressing time under referenced conditions |
| BS EN 12743:1999 | Footwear. Test methods for outsoles. Compression energy |
| UNE-EN 205:2016 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
| BS EN 302-3:2017 | Adhesives for load-bearing timber structures. Test methods Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| BS EN 12637-1:2004 | Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products Compatibility with concrete |
| EN 12814-6:2000 | Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test |
| DIN EN 13706-2:2003-02 | REINFORCED PLASTICS COMPOSITES - SPECIFICATIONS FOR PULTRUDED PROFILES - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
| EN 12744 : 1999 | FOOTWEAR - TEST METHODS FOR INSOLES - DELAMINATION RESISTANCE |
| EN 62011-2:2004 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test |
| EN 12637-1:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete |
| EN ISO 9513:2012/AC:2013 | Metallic materials - Calibration of extensometer systems used in uniaxial testing - Technical Corrigendum 1 (ISO 9513:2012/Cor 1:2013) |
| EN 12814-1:1999/AC:2003 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: BEND TEST |
| EN 13587:2016 | Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method |
| EN 12743:1999/AC:2001 | FOOTWEAR - TEST METHODS FOR OUTSOLES - COMPRESSION ENERGY |
| ONORM EN 302-6 : 2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| ONORM EN 302-4 : 2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
| ONORM EN 302-1 : 2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| PREN 302-6 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| BS 2782-11.1110C(1999) : 1999 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES - DETERMINATION OF THE TENSILE STRENGTH OF A SEAM |
| 11/30245841 DC : 0 | BS EN 302-3 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
| ISO 4433-1:1997 | Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method |
| 14/30285784 DC : 0 | BS EN 16730 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
| UNE-ISO 4664-1:2011 | Rubber, vulcanised or thermoplastic. Determination of dynamic properties. Parte 1: General guidance |
| 16/30340787 DC : 0 | BS ISO 13586 - PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (GIC AND KIC) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH |
| UNE-ISO 37:2013 | Rubber, vulcanised or thermoplastic. Determination of tensile stress-strain properties |
| 07/30162647 DC : 0 | BS ISO 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
| ISO 20867:2018 | Footwear — Test methods for insoles — Heel pin holding strength |
| EN IEC 61730-2:2018/AC:2018-06 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016) |
| PREN 15416-5 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| ISO 18352:2009 | Carbon-fibre-reinforced plastics Determination of compression-after-impact properties at a specified impact-energy level |
| 09/30196780 DC : DRAFT JAN 2009 | BS ISO 12493 - RUBBER, VULCANIZED - DETERMINATION OF STRESS IN TENSION ON HEATING |
| ISO 15114:2014 | Fibre-reinforced plastic composites Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach |
| BS EN ISO 2411:2017 | Rubber- or plastics-coated fabrics. Determination of coating adhesion |
| DIN EN 16556:2015-01 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| PREN 302-1 : DRAFT 2011 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| 17/30342172 DC : 0 | BS ISO 20975-2 - CARBON-FIBRE-REINFORCED PLASTICS - METHODS FOR MEASUREMENT OF THROUGH-THICKNESS LAMINATE PROPERTIES - PART 2: CONSIDERING SIZE EFFECTS BY FLEXURAL TEST |
| 07/30175034 DC : DRAFT DEC 2007 | BS ISO 18352 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT ENERGY LEVEL |
| NF ISO 36 : 2017 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO TEXTILE FABRICS |
| BS 5173-103.1(1986) : 1986 | METHODS OF TEST FOR RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - PHYSICAL TESTS - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
| 14/30304385 DC : 0 | BS ISO 34-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 2: SMALL (DELFT) TEST PIECES |
| BS ISO 6914:2013 | Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension |
| 09/30193376 DC : 0 | BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES |
| 15/30317687 DC : 0 | BS EN ISO 8033 - RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
| 11/30245844 DC : 0 | BS EN 302-4 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
| BS ISO 19210:2017 | Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
| BS 903-A3.3.2(1997) : 1997 | PHYSICAL TESTING OF RUBBER - DETERMINATION OF TEAR STRENGTH - SMALL (DELFT) TEST PIECES |
| 10/30167702 DC : 0 | BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION |
| BIS IS 3400-1 : 2012 | METHODS OF TEST FOR VULCANIZED RUBBER - PART 1: DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES |
| BS 903-A21.21.1(1997) : 1997 | PHYSICAL TESTING OF RUBBER - DETERMINATION OF RUBBER TO METAL BOND STRENGTH - ADHESION TO RIGID SUBSTRATES - 90 DEGREE PEEL METHOD |
| PREN 15416-4 : DRAFT 2015 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| 09/30198121 DC : 0 | BS ISO 13262 - THERMOPLASTICS PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - THERMOPLASTICS SPIRALLY-FORMED STRUCTURES-WALL PIPES - DETERMINATION OF THE TENSILE STRENGTH OF A SEAM |
| BS ISO 4664:1998 | Rubber. Guide to the determination of dynamic properties |
| ISO 6916-2:2001 | Flexible cellular polymeric materials Sponge and expanded cellular rubber products Specification Part 2: Mouldings and extrusions |
| UNE-EN ISO 20795-2:2013 | Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013) |
| I.S. EN ISO 13262:2017 | THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES - DETERMINATION OF THE TENSILE STRENGTH OF A SEAM (ISO 13262:2010) |
| UNI EN 15870 : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| ISO 19213:2017 | Implants for surgery — Test methods of material for use as a cortical bone model |
| 15/30319712 DC : 0 | BS EN 1279-4 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
| I.S. EN ISO 2411:2017 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF COATING ADHESION (ISO 2411:2017) |
| ISO 12493:2017 | Rubber, vulcanized — Determination of stress in tension upon heating |
| IEC 61730-2:2016 | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| ISO 15108:1998 | Adhesives Determination of strength of bonded joints using a bending-shear method |
| DIN EN ISO 4074:2016-05 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| DIN EN 15416-5:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| DIN EN 302-1:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| DIN EN ISO 9513:2013-05 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
| DIN EN 15416-4:2015-06 (Draft) | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| BS EN 1979:1999 | Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam |
| UNE-EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
| BS EN 12745:1999 | Footwear. Test methods for insoles. Pin holding strength |
| BS EN ISO 14125 : 1998 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| BS EN ISO 14129:1998 | Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method |
| ISO 15310:1999 | Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method |
| BS EN 12814-6:2000 | Testing of welded joints of thermoplastics semi-finished products Low temperature tensile test |
| DIN EN ISO 6259-1:2002-02 | THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD |
| I.S. EN 205:2016 | ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| DIN EN 13587:2017-02 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| I.S. EN ISO 11339:2010 | ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| DIN EN ISO 11339:2010-06 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| I.S. EN 302-4:2013 | ADHESIVE FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
| I.S. EN 302-1:2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| I.S. EN ISO 4074:2015 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| I.S. EN 13587:2016 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| I.S. EN ISO 9513:2012 | METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012) |
| I.S. EN 302-3:2017 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
| I.S. EN 15416-4:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME FOR ONE COMPONENT POLYURETHANE ADHESIVES |
| I.S. EN ISO 6259-1:2015 | THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD (ISO 6259-1:2015) |
| I.S. EN ISO 604:2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| I.S. EN 302-6:2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| I.S. EN 12814-2:2000 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 2: TENSILE TEST |
| DIN 53504:2009-10 | TESTING OF RUBBER - DETERMINATION OF TENSILE STRENGTH AT BREAK, TENSILE STRESS AT YIELD, ELONGATION AT BREAK AND STRESS VALUES IN A TENSILE TEST |
| I.S. EN ISO 8033:2017 | RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS (ISO 8033:2016) |
| EN 12814-2:2000 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 2: TENSILE TEST |
| I.S. EN 15416-5:2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF CONVENTIONAL PRESSING TIME |
| BS 903-A12(1999) : 1999 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO TEXTILE FABRIC |
| BS 903-A12:1995 | Physical testing of rubber Method for determination of the adhesion strength to textile fabric |
| DIN EN 15416-4:2017-05 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| DIN EN 15416-5:2017-05 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| BS 903-A3:1995 | Physical testing of rubber Method for determination of tear strength (trouser, angle and crescent test pieces) |
| BS 903-A4:1990 | Physical testing of rubber Determination of compression stress-strain properties |
| BS 903-A61(2000) : 2000 AMD 13431 | RUBBER - DETERMINATION OF FRICTIONAL PROPERTIES |
| NBR 15708-5 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPES - PART 5: STRUCTURAL SHAPES |
| DIN 18035-7:2014-10 | SPORTS GROUNDS - PART 7: SYNTHETIC TURF AREAS |
| 02/122388 DC : DRAFT JUN 2002 | ISO/DIS 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
| ISO 19210:2017 | Adhesives — Wood adhesives for non-structural applications — Determination of tensile shear strength of lap joints |
| I.S. EN ISO 20795-2:2013 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO 20795-2:2013) |
| ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
| EN ISO 13262:2017 | Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010) |
| 14/30304382 DC : 0 | BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES |
| DIN ISO 18352:2017-11 | CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT-ENERGY LEVEL (ISO 18352:2009) |
| BS ISO 6605:2017 | Hydraulic fluid power. Test methods for hoses and hose assemblies |
| UNE-ISO 34-2:2011 | Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces |
| 03/112850 DC : DRAFT SEP 2003 | ISO 4664 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - GENERAL CONSIDERATIONS |
| BS 2782-11.1161A(1998) : 1998 | METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - THERMOPLASTICS PIPES - RESISTANCE TO LIQUID CHEMICALS - CLASSIFICATION - IMMERSION TEST METHOD |
| 16/30315352 DC : 0 | BS ISO 19210 - ADHESIVES - THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| BS EN ISO 20795-2:2013 | Dentistry. Base polymers Orthodontic base polymers |
| PREN 1279-4 : DRAFT 2015 | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
| BS 2000-519(2010) : 2010 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| DIN ISO 1827:2010-07 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS |
| PREN 12814-4 : DRAFT 2016 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
| 02/122445 DC : DRAFT JUN 2002 | ISO/DIS 6914 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION |
| 09/30193379 DC : DRAFT FEB 2009 | BS ISO 813 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO A RIGID SUBSTRATE - 90 DEGREES PEEL METHOD |
| BS ISO 7743:2017 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
| ISO 34-2:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces |
| 03/105598 DC : DRAFT MAY 2003 | BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT |
| BS ISO 15310 : 1999 AMD 15944 | REINFORCED PLASTICS - DETERMINATION OF THE IN-PLANE SHEAR MODULUS BY THE PLATE TWIST METHOD |
| 16/30341216 DC : 0 | BS EN 12814-4 - TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
| BS ISO 6916-1:1995 | Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. Specification Sheeting |
| CEI EN 62011-2 : 2005 | INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| ISO 5603:2017 | Rubber, vulcanized — Determination of adhesion to wire cord |
| BS ISO 15113:2005 | Rubber. Determination of frictional properties |
| BS ISO 18899:2013 | Rubber. Guide to the calibration of test equipment |
| DIN ISO 34-1:2016-09 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES (ISO 34-1:2015) |
| BS 2000-519(2003) : 2003 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-519: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
| BS EN 14257:2006 | Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT \'91) |
| UNE-EN ISO 2411:2018 | Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017) |
| I.S. EN 15870:2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| ASTM D 5938 : 1996 | Standard Test Method for Determination of Tensile Properties (Withdrawn 1998) |
| I.S. EN 12814-4:2002 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
| ISO 17454:2006 | Plastics piping systems Multilayer pipes Test method for the adhesion of the different layers using a pulling rig |
| ISO 4578:1997 | Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method |
| BS ISO 813:2016 | Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method |
| UNI ISO 7743 : 2012 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
| ISO 20866:2018 | Footwear — Test methods for insoles — Delamination resistance |
| EN 12814-4:2018 | Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test |
| DIN EN 14257 E : 2006 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| I.S. EN 12068:1999 | CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS |
| EN ISO 14125:1998/A1:2011 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| ISO 15113:2005 | Rubber — Determination of frictional properties |
| DIN EN 14188-3:2006-04 | Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
| NF EN 12814-2 : 2000 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 2: TENSILE TEST |
| DIN EN 302-4:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
| DIN EN 302-6:2013-06 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| BS EN 302-1:2013 | Adhesives for load-bearing timber structures. Test methods Determination of longitudinal tensile shear strength |
| ISO 14125:1998 | Fibre-reinforced plastic composites Determination of flexural properties |
| BS EN 13706-2:2002 | Reinforced plastics composites. Specifications for pultruded profiles Method of test and general requirements |
| BS EN ISO 9513:2012 | Metallic materials. Calibration of extensometer systems used in uniaxial testing |
| BS EN 12814-1:2000 | Testing of welded joints of thermoplastics semi-finished products Bend test |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
| EN 638 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES |
| EN 1979:1999 | Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam |
| UNI EN ISO 14125 : 2011 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| UNI EN 302-6 : 2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| UNI EN 302-4 : 2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
| I.S. EN ISO 14125:1998 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| I.S. EN ISO 14126:2000 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
| BS 2782-3.335A(1993) : AMD 8638 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF FLEXURAL PROPERTIES |
| UNI EN ISO 604 : 2008 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| UNI EN ISO 9513 : 2013 | METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING |
| UNI EN 302-1 : 2013 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
| ISO 1827:2016 | Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods |
| BS ISO 34-2:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Small (Delft) test pieces |
| 96/125176 DC : DRAFT SEP 96 | ISO/CD 15024 DETERMINATION OF THE MODE 1 DELAMINATION RESISTANCE (CRITICAL STRAIN ENERGY RELEASE RATE OR FRACTURE TOUGHNESS G[LC]) OF UNIDIRECTIONAL FIBRE-REINFORCED POLYMER LAMINATES USING THE DOUBLE CANTILEVER BEAM (DCB) SPECIMEN |
| UNI EN ISO 20795-2 : 2013 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS |
| DIN EN 15416-5 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| 13/30259197 DC : 0 | BS EN 16556 - ADHESIVES - DETERMINATION OF THE OPEN ASSEMBLY TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
| BS 2782-11.1110B(1995) : 1995 | METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTING AND VALVES - PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES |
| DIN ISO 18352 E : 2017 | CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT-ENERGY LEVEL (ISO 18352:2009) |
| ISO 12815:2013 | Fibre-reinforced plastic composites — Determination of plain-pin bearing strength |
| ISO 6916-1:1995 | Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| BS EN 15870:2009 | Adhesives. Determination of tensile strength of butt joints |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| BS ISO 15114:2014 | Fibre-reinforced plastic composites. Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach |
| BS ISO 12493:2017 | Rubber, vulcanized. Determination of stress in tension upon heating |
| 00/121284 DC : DRAFT MAR 2000 | PREN 13864 - SURFACES FOR SPORTS AREAS - DETERMINATION OF TENSILE STRENGTH OF SYNTHETIC YARNS |
| BS ISO 12815:2013 | Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength |
| DIN ISO 11752 E : 2004 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - MOULDED AND EXTRUDED SPONGE OR EXPANDED CELLULAR RUBBER PRODUCTS - COMPRESSIBILITY TEST ON FINISHED PARTS |
| DIN EN 14840 E : 2005 | JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
| 15/30296777 DC : 0 | BS EN 15416-4 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| BS ISO 34-1:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Trouser, angle and crescent test pieces |
| ISO 4647:2010 | Rubber, vulcanized Determination of static adhesion to textile cord H-pull test |
| 15/30328396 DC : 0 | BS EN 302-3 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
| 12/30215688 DC : 0 | BS ISO 15114 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF THE MODE 2 FRACTURE RESISTANCE FOR UNIDIRECTIONALLY REINFORCED MATERIALS USING THE CALIBRATED END-LOADED SPLIT (C-ELS) TEST AND AN EFFECTIVE CRACK LENGTH APPROACH |
| 11/30245847 DC : 0 | BS EN 302-6 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| BS ISO 9026:2007 | Raw rubber or unvulcanized compounds. Determination of green strength |
| 15/30296762 DC : 0 | BS EN 15416-5 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
| 04/30110689 DC : DRAFT MARCH 2004 | BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSIILE STRESS-STRAIN PROPERTIES |
| DIN ISO 7743:2016-08 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES (ISO 7743:2011) |
| ISO 13586:2000 | Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach |
| BS ISO 19213:2017 | Implants for surgery. Test methods of material for use as a cortical bone model |
| PREN ISO 20795-2 : DRAFT 2012 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO/FDIS 20795-2:2012) |
| I.S. EN 16556:2014 | DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NONSTRUCTURAL APPLICATIONS |
| UNE-ISO 34-1:2011 | Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces |
| ISO 4664:1998 | Rubber Guide to the determination of dynamic properties |
| ISO 15107:1998 | Adhesives Determination of cleavage strength of bonded joints |
| BS EN ISO 13262:2017 | Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| ISO 15024:2001 | Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials |
| DIN EN ISO 14125:2011-05 | Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor 1:2001 + Amd 1:2011) |
| DIN EN ISO 14130:1998-02 | FIBRE REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD |
| DIN EN 302-3:2015-09 (Draft) | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
| DIN EN ISO 604 E : 2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| DIN EN 13864:2004-09 | Surfaces for sports areas - Determination of tensile strength of synthetic yarns |
| BS EN ISO 14126:1999 | Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction |
| BS EN ISO 11339:2010 | Adhesives. T-peel test for flexible-to-flexible bonded assemblies |
| DIN EN ISO 604:2003-12 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| BS EN 638:1995 | Plastics piping and ducting systems. Thermoplastics pipes. Determination of tensile properties |
| BS EN 12814-2:2000 | Testing of welded joints of thermoplastics semi-finished products Tensile test |
| UNE-EN ISO 4074:2016 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
| ISO 14129:1997 | Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method |
| BS EN 14188-3 : 2005 | JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
| UNE-EN 302-1:2013 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| ISO 6259-1:2015 | Thermoplastics pipes Determination of tensile properties Part 1: General test method |
| ISO 14130:1997 | Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
| UNE-EN 302-4:2013 | Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
| BS EN ISO 6259-1:2015 | Thermoplastics pipes. Determination of tensile properties General test method |
| ISO 20795-2:2013 | Dentistry Base polymers Part 2: Orthodontic base polymers |
| BS EN 13587:2016 | Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method |
| UNE-EN ISO 14125:1999 | FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998) |
| BS EN 13864:2004 | Surfaces for sports areas. Determination of tensile strength of synthetic yarns |
| ISO 14126:1999 | Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
| UNE-EN ISO 9513:2013 | Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012, Corrected version 2015-06) |
| ISO 4074:2015 | Natural rubber latex male condoms Requirements and test methods |
| BS EN 302-6:2013 | Adhesives for load-bearing timber structures. Test methods Determination of the minimum pressing time under referenced conditions |
| UNE-ISO 7743:2016 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
| UNE-EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| UNE-EN 302-6:2013 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| EN 14188-3 : 2006 | JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
| EN ISO 15310:2005 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999) |
| EN 14840 : 2005 | JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
| EN 13864:2004 | Surfaces for sports areas - Determination of tensile strength of synthetic yarns |
| EN ISO 14130 : 1997 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD |
| UNI EN ISO 11339 : 2010 | ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO- FLEXIBLE BONDED ASSEMBLIES |
| EN ISO 14126:1999/AC:2002 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
| EN 15416-5:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
| EN 13706-2:2002 | Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements |
| EN 302-4:2013 | Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
| EN ISO 11339:2010 | Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
| EN 15870:2009 | Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified) |
| EN ISO 604 : 2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002) |
| EN 16556:2014 | Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
| EN ISO 6259-1:2015 | Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) |
| EN 205:2016 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
| EN ISO 14129 : 1997 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE +/- 45 DEGREES TENSION TEST METHOD (ISO 14129:1997) |
| EN 302-6:2013 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
| EN ISO 20795-2:2013 | Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013) |
| EN 302-3:2017 | Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| EN ISO 4074:2015 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
| EN 302-1:2013 | Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
| EN 14257:2006 | Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91) |
| EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| UNI ISO 813 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO A RIGID SUBSTRATE - 90 DEGREES PEEL METHOD |
| BS 2782-3.321(1994) : 1994 AMD 8633 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - GENERAL PRINCIPLES |
| DIN EN 15870:2009-08 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| BS ISO 1827:2016 | Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods |
| BS PAS 27(1999) : 1999 | UNPLASTICIZED POLY(VINYL CHLORIDE) ALLOY (PVC-A) PIPES AND BENDS FOR WATER UNDER PRESSURE |
| 16/30334053 DC : 0 | BS EN ISO 2411 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF COATING ADHESION |
| I.S. EN 62011-2:2004 | INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES, - PART 2: METHODS OF TEST |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| 16/30335302 DC : 0 | BS ISO 1827 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS |
| BS EN 62011-2:2004 | Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes Methods of test |
| DIN ISO 11752:2004-11 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - MOULDED AND EXTRUDED SPONGE OR EXPANDED CELLULAR RUBBER PRODUCTS - COMPRESSIBILITY TEST ON FINISHED PARTS |
| 15/30302738 DC : 0 | BS ISO 19213 - IMPLANTS FOR SURGERY - TEST METHODS OF MATERIAL FOR USE AS A CORTICAL BONE MODEL |
| BS ISO 12817:2013 | Fibre-reinforced plastic composites. Determination of open-hole compression strength |
| 11/30196210 DC : 0 | BS ISO 12815 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH |
| 12/30251858 DC : 0 | BS ISO 4074 - NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS |
| 13/30274532 DC : 0 | BS EN ISO 6259-1 - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD |
| 12/30261822 DC : 0 | BS ISO 6914 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION |
| BIS IS 13360-5-8 : 2013 | PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 8: DETERMINATION OF COMPRESSIVE PROPERTIES |
| BS ISO 11752:2000 | Flexible cellular polymeric materials. Moulded and extruded sponge or expanded cellular rubber products. Compressibility test on finished parts |
| DIN EN 15416-4 E : 2017 | ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
| 16/30312462 DC : 0 | BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
| ISO 5600:2017 | Rubber — Determination of adhesion to rigid materials using conical shaped parts |
| BS 903-A62:1993 | Physical testing of rubber Method for determination of green strength of raw rubber of unvulcanized compounds |
| BS ISO 36:2017 | Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics |
| ISO 7743:2017 | Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
| PREN 3795 : 200P1 | AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF FREEDOM FROM EXCESSIVE CURE RATE |
| ONORM EN 14257 : 2006 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| ISO 4635:2011 | Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification |
| ASTM D 5943 : 1996 | Test Method for Determination of Flexural Properties (Withdrawn 1998) |
| UNI ISO 6914 : 2014 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION |
| ISO 6914:2013 | Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension |
| I.S. EN IEC 61730-2:2018 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| ISO 11752:2000 | Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| ISO 4585:1989 | Textile glass reinforced plastics Determination of apparent interlaminar shear properties by short-beam test |
| NF EN 12814-4 : 2002 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
| PREN 205 : DRAFT 2015 | ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
| PREN 302-3 : DRAFT 2015 | ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
| BS EN 12814-4:2001 | Testing of welded joints of thermoplastics semi-finished products Peel test |
| ISO 9026:2007 | Raw rubber or unvulcanized compounds Determination of green strength |
| I.S. EN 14257:2006 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| I.S. EN 14840:2005 | JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
| IEC 61730-2 REDLINE : 2ED 2016 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING |
| BS EN 12744:1999 | Footwear. Test methods for insoles. Delamination resistance |
| UNE-EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
| BS EN ISO 14130:1998 | Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method |
| ISO 11339:2010 | Adhesives T-peel test for flexible-to-flexible bonded assemblies |
| BS EN 15416-4:2017 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of open assembly time under referenced conditions |
| BS EN 12637-3:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products Effect of injection products on elastomers |
| BS EN 302-4:2013 | Adhesives for load-bearing timber structures. Test methods Determination of the effects of wood shrinkage on the shear strength |
| BS EN ISO 15310:2005 | Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method |
| BS EN 12814-7:2002 | Testing of welded joints of thermoplastics semi-finished products Tensile test with waisted test specimens |
| BS EN 205:2003 | Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
| BS EN ISO 4074:2015 | Natural rubber latex male condoms. Requirements and test methods |
| EN 12637-3:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers |
| DIN EN 14840:2005-12 | Joint fillers and sealants - Test methods for preformed joint seals |
| DIN EN 12637-3:2004-03 | Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers; German version EN 12637-3:2003 |
| DIN EN 14257:2006-09 | ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
| EN 12745 : 1999 | FOOTWEAR - TEST METHODS FOR INSOLES - HEEL PIN HOLDING STRENGTH |
| EN 12814-7:2002 | Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens |
| EN 12068:1998 | Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
| DIN EN 12814-7:2003-01 | TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 7: TENSILE TEST WITH WAISTED TEST SPECIMENS |
| DIN EN 12637-1:2004-11 | Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete |
| IEC 61730-2:2016 RLV | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| BS 2782-3.345A(1993) : 1993 AMD 8637 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF COMPRESSIVE PROPERTIES |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.