ISO 6508-1 : 2016

Current

Current The latest, up-to-date edition.

Add to Watchlist What is StandardsWatch?

This Standard has been added successfully to your Watchlist.
Please visit My Watchlist to see all standards that you are watching.

You need to be logged in to add this standard to your Watchlist.
Please log in now or create an account to add.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You have already added this standard to your Watchlist.
Visit My Watchlist to view the full list.

Preview

METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 1: TEST METHOD

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): French, English

Published date: 08-15-2016

Publisher: International Organization for Standardization

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Principle
4 Symbols, abbreviated terms and designations
5 Testing machine
6 Test piece
7 Procedure
8 Uncertainty of the results
9 Test report
10 Conversions to other hardness scales or tensile
   strength values
Annex A (normative) - Special HR30TSm and HR15TSm
        test for thin products
Annex B (normative) - Minimum thickness of the test piece
        in relation to the Rockwell hardness
Annex C (normative) - Corrections to be added to Rockwell
        hardness values obtained on convex cylindrical surfaces
Annex D (normative) - Corrections to be added to Rockwell
        hardness C scale values obtained on spherical test
        surfaces of various diameters
Annex E (normative) - Daily verification procedure
Annex F (normative) - Inspection of diamond indenters
Annex G (informative) - Uncertainty of the measured hardness
        values
Annex H (informative) - CCM - Working group on hardness
Annex I (informative) - Rockwell hardness measurement
        Traceability
Bibliography

Abstract - (Show below) - (Hide below)

This part of ISO 6508 specifies the method for Rockwell regular and Rockwell superficial hardness tests for scales A, B, C, D, E, F, G, H, K, 15N, 30N, 45N, 15T, 30T, and 45T for metallic materials and is applicable to stationary and portable hardness testing machines.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Organization for Standardization
Development Note	Supersedes ISO 6508 and ISO 1024 (04/2001) Supersedes ISO/DIS 6508-1. (08/2016)
Pages
ISBN
Committee	TC 164
Supersedes	ISO 1024 : 1989 ISO 6508-1 : 2015 ISO/DIS 6508-1 : 60.00 (2016) ISO 6508 : 1986

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN ISO 6508-1 : 2016	Identical
NF EN ISO 6508-1 : 2016	Identical
NBN EN ISO 6508-1 : 2016	Identical
NEN EN ISO 6508-1 : 2016	Identical
NS EN ISO 6508-1 : 2016	Identical
I.S. EN ISO 6508-1:2016	Identical
PN EN ISO 6508-1 : 2016	Identical
SN EN ISO 6508-1 : 2016	Identical
UNI EN ISO 6508-1 : 2006	Identical
SS-EN ISO 6508-1:2016	Identical
UNI EN ISO 6508-1:2016	Identical
ABNT NBR ISO 6508-1:2019	Identical
UNE-EN ISO 6508-1:2017	Identical
BS EN ISO 6508-1 : 2015	Identical
EN ISO 6508-1 : 2016	Identical
DIN EN ISO 6508-1:2016-12	Identical
DIN EN ISO 6508-1 E : 2015	Identical
UNI EN ISO 6508-1:2016	Identical
BS EN ISO 6508-1 : 2015	Identical
DS EN ISO 6508-1 : 2016	Identical
UNE-EN ISO 6508-1:2017	Identical
DIN EN ISO 6508-1 E : 2015	Identical
DIN EN ISO 6508-1:2015-06	Identical
BIS IS 1586-1 : 2012	Identical
PN EN ISO 6508-1 : 2016	Identical
ABNT NBR ISO 6508-1:2019	Identical
SS-EN ISO 6508-1:2016	Identical
I.S. EN ISO 6508-1:2016	Identical
DIN EN ISO 6508-1:2016-12	Identical
NBR NM-ISO 6508-1 : 2008	Identical
SANS 6508-1 : 2ED 2009	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

(INACTIVE RECORD) DIN ISO 10071-2:2006-03	TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 2: BALL-LOCK PUNCHES FOR HEAVY DUTY
(INACTIVE RECORD) DIN EN 657:2005-06	THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION
DIN EN ISO 19715 E : 2017	DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017)
(INACTIVE RECORD) DIN EN 15638:2009-07	ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS
UNI ISO 9657 : 2011	PLIERS AND NIPPERS FOR ELECTRONICS - GENERAL TECHNICAL REQUIREMENTS
DIN EN 16630:2015-06	PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
UNI EN ISO 16635-2 : 2014	DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS
BS EN ISO 16635-2 : 2014	DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS
(INACTIVE RECORD) DIN ISO 10071-1:2010-11	TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 1: BALL-LOCK PUNCHES FOR LIGHT DUTY
10/30165716 DC : 0	BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
BS EN 3389 : 2009	AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
NBR 15893-2 : 2010	ORTHOPEDIC IMPLANTS - METALLIC MATERIALS - PART 2: WROUGHT NITROGEN STRENGTHENED 21CHROMIUM-10NICKEL-3MANGANESE-2.5MOLYBDENUM STAINLESS STEEL ALLOY BAR (UNS S31675)
09/30214463 DC : 0	BS EN 2582 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C TECHNICAL SPECIFICATION
07/30161097 DC : 0	EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS
(INACTIVE RECORD)ABMA 10A : 2001	METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES
09/30214454 DC : 0	BS EN 2576 - AEROSPACE SERIES BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C TECHNICAL SPECIFICATION
DIN EN ISO 15156-3 : 2015	PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015)
BS EN 4700-001 : 2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
BS EN 16451 : 2015	RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
DIN EN ISO 26443:2016-09	FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008)
API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015	SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
06/30143291 DC : DRAFT MAY 2006	ISO 5182 - WELDING - MATERIALS FOR RESISTANCE WELDING ELECTRODES AND ANCILLARY EQUIPMENT
05/30136295 DC : DRAFT JUL 2005	ISO 4875-2 - METAL-CUTTING BAND SAW BLADES - PART 2: CHARACTERISTICS AND DIMENSIONS
04/30105010 DC : DRAFT JUL 2004	ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD
BS ISO 8642 : 2008	AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - TEST METHODS
NF EN ISO 9809-3 : 2011	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
UNI CEN/TS 16700 : 2014	PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE
S.R. CEN/TS 16700:2014	PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE
BS EN 1627 : 2011	PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - REQUIREMENTS AND CLASSIFICATION
API SPEC 19OH : 2018	OPENHOLE ISOLATION EQUIPMENT
08/30160607 DC : DRAFT MAY 2008	BS ISO 26910-1 - SPRINGS - SHOT PEENING - PART 1: GENERAL PROCEDURES
14/30278521 DC : 0	BS EN ISO 18556 - DENTISTRY - INTRAORAL SPATULAS
12/30245297 DC : 0	BS EN ISO 16635-2 - DENTISTRY - RUBBER DAM TECHNIQUE - PART 2: RUBBER DAM CLAMP FORCEPS
DIN EN 1627 E : 2011	PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - REQUIREMENTS AND CLASSIFICATION
DIN EN ISO 16635-1 E : 2014	DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013)
17/30352150 DC : 0	BS ISO 6787 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - ADJUSTABLE WRENCHES
07/30172770 DC : 0	BS ISO 10428 - PETROLEUM AND NATURAL GAS INDUSTRIES DOWNHOLE EQUIPMENT - DOWNHOLE EQUIPMENT - SUCKER RODS, COUPLINGS AND ANCILLARY EQUIPMENT
BS ISO 17541 : 2014	PLASTICS - QUANTITATIVE EVALUATION OF SCRATCH-INDUCED DAMAGE AND SCRATCH VISIBILITY
API SPEC 11D1 : 2015	PACKERS AND BRIDGE PLUGS
UNE EN ISO 12670 : 2016	THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011)
ISO 898-3 : 2018	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES
DIN EN 10083-3 : 2009-01	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
BS EN ISO 9809-1 : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
10/30196141 DC : 0	BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS
BS ISO 9448-9 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 9: FORM B, BALL CAGE BUSHES, PLAIN, TYPE 2
NF EN ISO 9809-2 : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
BS ISO 12670 : 2011 COR 2015	THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS
16/30302544 DC : 0	BS EN ISO 9873 - DENTISTRY - INTRA-ORAL MIRRORS
10/30196823 DC : 0	BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS
DIN EN 16281 E : 2013	CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN ISO 12690 : 2010	METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
DIN EN ISO 16635-1:2014-09	DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013)
BS EN 3388 : 2009	AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
BS EN 16281 : 2013	CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
NBR 15893-1 : 2010	ORTHOPEDIC IMPLANTS - METALLIC MATERIALS - PART 1: WROUGHT NITROGEN STRENGTHENED 11MANGANESE-17CHROMIUM-3-MOLYBDENUM LOW-NICKEL STAINLESS STEEL ALLOY BAR AND WIRE (UNS S29225)
BS EN 4700-004 : 2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
BS EN 12697-31 : 2007	BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
ISO 10071-1 : 2008(R2018)	TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 1: BALL-LOCK PUNCHES FOR LIGHT DUTY
DIN EN ISO 18556 E : 2016	DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016)
11/30230618 DC : 0	BS ISO 683-2 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 2: ALLOY STEELS FOR QUENCHING AND TEMPERING
BS EN 4700-006 : 2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
BS ISO 9448-4 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 4: FORM C, GLIDING BUSHES, HEADED, TYPE 1
I.S. EN ISO 9809-1:2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
ISO 17918 : 2015	CORROSION OF METALS AND ALLOYS - EVALUATION OF SELECTIVE CORROSION OF CU ALLOYS AND GREY CAST IRON FOR POWER PLANT COMPONENTS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT
DIN EN ISO 22068 E : 2014	SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012)
ISO 5743 : 2004(R2013)	PLIERS AND NIPPERS - GENERAL TECHNICAL REQUIREMENTS
DIN EN 10088-4 E : 2010	STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
BS ISO 9656 : 2004	PLIERS AND NIPPERS FOR ELECTRONICS - TEST METHODS
02/704957 DC : DRAFT NOV 2002	ISO 683-14 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 14: HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS
12/30257301 DC : 0	BS EN ISO 20957-1 - STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
ISO 11749 : 2014	BELT DRIVE - V-RIBBED BELTS FOR THE AUTOMOTIVE INDUSTRY - FATIGUE TEST
11/30196123 DC : DRAFT MAY 2011	BS ISO 11119-2 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS WITH LOAD-SHARING METAL LINERS
BS ISO 289-1 : 2015	RUBBER, UNVULCANIZED - DETERMINATIONS USING A SHEARING-DISC VISCOMETER - PART 1: DETERMINATION OF MOONEY VISCOSITY
ISO 404 : 2013(R2018)	STEEL AND STEEL PRODUCTS - GENERAL TECHNICAL DELIVERY REQUIREMENTS
DIN EN ISO 22068:2014-06	SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012)
BS EN ISO 16635-1 : 2014	DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH
DIN EN 15638 E : 2009	ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS
PREN 10263-1 : DRAFT 2014	STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN ISO 10071-2 E : 2006	TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 2: BALL-LOCK PUNCHES FOR HEAVY DUTY
I.S. EN ISO 5182:2016	RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016)
API SPEC 5CRA : 2010	SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
09/30196832 DC : 0	BS ISO 12690 - THERMAL SPRAYING - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
03/302675 DC : DRAFT FEB 2003	EN 14616 - THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
BS EN ISO 22068 : 2014	SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS
13/30276463 DC : 0	BS ISO 289-1 - RUBBER, UNVULCANIZED - DETERMINATIONS USING A SHEARING-DISC VISCOMETER - PART 1: DETERMINATION OF MOONEY VISCOSITY
BS ISO 17918 : 2015	CORROSION OF METALS AND ALLOYS - EVALUATION OF SELECTIVE CORROSION OF CU ALLOYS AND GREY CAST IRON FOR POWER PLANT COMPONENTS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT
15/30285035 DC : 0	BS EN ISO 14917 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION
BS EN ISO 17078-4 : 2010	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
BS ISO 9154 : 2016	AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF HEAT-RESISTANT NICKEL-BASED ALLOY, STRENGTH CLASS 1550 MPA - PROCUREMENT SPECIFICATION
ISO 7241 : 2014	HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS OF QUICK-ACTION COUPLINGS
04/30074924 DC : DRAFT JUNE 2004	EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION AND REFERENCE BLOCKS (SCALES A, B, C, D, E, F, G, H, K, N, T)
NBR NM-300-1 : 2007	SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES
DIN EN ISO 3266:2016-05	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015)
UNI EN ISO 9809-3 : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
13/30274822 DC : 0	BS ISO 11119-4 - GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH LOAD-SHARING WELDED METALLIC LINERS
VDI/VDE 2616-1 : 2012	HARDNESS TESTING OF METALLIC MATERIALS
15/30303331 DC : 0	BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD
ISO 11949 : 2016	COLD-REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE
UNE EN ISO 5182 : 2017	RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016)
17/30357660 DC : DRAFT AUG 2017	BS ISO 4960 - STEEL STRIP, COLD-REDUCED WITH A MASS FRACTION OF CARBON OVER 0,25%
API 11D3 :2008	PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
(INACTIVE RECORD) DIN ISO 4498:2005-11	SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS
DIN EN 1627:2011-09	PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - REQUIREMENTS AND CLASSIFICATION
BS ISO 9448-5 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 5: FORM D, BALL CAGE BUSHES, HEADED, TYPE 1
DIN EN ISO 12670:2015-12	THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011)
ISO 13533 : 2001(R2017)	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT
BS ISO 9448-6 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 6: FORM E, GLIDING BUSHES, FLANGED, TYPE 1
08/30146353 DC : DRAFT MAR 2008	BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
(INACTIVE RECORD) DIN EN 12697-31:2007-06	BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
BS ISO 16468 : 2015	INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) - GENERAL TECHNICAL REQUIREMENTS
16/30320762 DC : 0	BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
(INACTIVE RECORD)API 16A : 2017 : INC : ERR 3 : 2018	SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
DIN EN 10088-4:2010-01	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
13/30264734 DC : 0	BS ISO 17918 - EVALUATION OF SELECTIVE CORROSION OF ALLOYS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT
(INACTIVE RECORD) API 11D3 : 2008	PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
BS ISO 6787 : 2001	ASSEMBLY TOOLS FOR SCREWS AND NUTS - ADJUSTABLE WRENCHES
DIN EN ISO 12690 E : 2011	METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
API 14A : 2015	SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
BS ISO 9182-3 : 2013	TOOLS FOR PRESSING - GUIDE PILLARS - PART 3: TYPE B, END-LOCKING PILLARS
DIN EN ISO 15156-3 E : 2015	PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 151563:2015)
DIN EN 10205:1992-01	COLD REDUCED TIN-MILL PRODUCTS - BLACKPLATE
03/114555 DC : DRAFT SEP 2003	EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560
BS ISO 5287 : 2003	BELT DRIVES - NARROW V-BELTS FOR THE AUTOMOTIVE INDUSTRY - FATIGUE TEST
ISO 9448-10 : 2013(R2019)	TOOLS FOR PRESSING - GUIDE BUSHES - PART 10: FORM E, GLIDING BUSHES, FLANGED, TYPE 2
API 19G1 CHINESE : 2010	SIDE-POCKET MANDRELS
BS EN 16630 : 2015	PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
BS ISO 9448-7 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 7: FORM F, BALL CAGE BUSHES, FLANGED, TYPE 1
05/30128683 DC : DRAFT FEB 2005	ISO 5857 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1250 MPA - PROCUREMENT SPECIFICATION
API 16A : 2017	SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
API 64 : 2017-08	DIVERTER EQUIPMENT SYSTEMS
BS EN ISO 20957-1 : 2013	STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
(INACTIVE RECORD) DIN EN ISO 898-2:2012-08	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
DIN EN 16451:2015-09	RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
13/30260404 DC : 0	BS ISO 1711-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 2: MACHINE-OPERATED SOCKETS (IMPACT)
ONORM EN ISO 15630-3 : 2011	STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
I.S. EN ISO 14917:2017	THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017)
BS EN ISO 19490 : 2017	DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017)
06/30148182 DC : DRAFT MAY 2006	ISO 7866 - GAS CYLINDERS REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING
UNI EN ISO 12690 : 2011	METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
13/30290101 DC : 0	BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
17/30312468 DC : 0	BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS
17/30337413 DC : 0	BS EN ISO 4957 - TOOL STEELS
BS EN ISO 26443 : 2016	FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008)
BS EN 15638 : 2009	ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS
(INACTIVE RECORD) DIN 5401:2002-08	ROLLING BEARINGS - BALLS FOR ROLLING BEARINGS AND GENERAL INDUSTRIAL USE
16/30327498 DC : 0	BS ISO 1711-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 1: HAND-OPERATED WRENCHES AND SOCKETS
API 16A CHINESE : 2004	SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
17/30352980 DC : 0	BS EN ISO 14918 - THERMAL SPRAYING - QUALIFICATION TESTING OF THERMAL SPRAYERS
DIN EN ISO 12679:2015-12	THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011)
NACE/ASTM G 193 : 2012-05	TERMINOLOGY AND ACRONYMS RELATING TO CORROSION
DIN EN ISO 7866 E : 2013	GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012)
BS EN ISO 5182 : 2009	RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT
15/30323937 DC : 0	BS EN 3302 - AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION
06/30148173 DC : DRAFT SEP 2006	ISO 9809-1 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
BS ISO 7241 : 2014	HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS OF QUICK-ACTION COUPLINGS
17/30370705 DC : 0	BS EN 3685 - AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION
BS ISO 11749 : 2014	BELT DRIVE - V-RIBBED BELTS FOR THE AUTOMOTIVE INDUSTRY - FATIGUE TEST
BS EN 4700-002 : 2016	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
08/30182454 DC : DRAFT JULY 2008	BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
UNI EN 4700-005 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
DIN EN ISO 18556:2016-09	DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016)
DIN EN ISO 12670 E : 2015	THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011)
PREN 14399-9 : DRAFT 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
(INACTIVE RECORD)DIN EN ISO 14917:2017-08	THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017)
UNI ISO 9656 : 2011	PLIERS AND NIPPERS FOR ELECTRONICS - TEST METHODS
14/30295082 DC : 0	BS ISO 683-3 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 3: CASE HARDENING STEELS
11/30238890 DC : 0	BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES
BS ISO 22068 : 2012	SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS
DIN EN ISO 9873 : 2016	DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
BS ISO 10071-2 : 2005	TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 2: BALL-LOCK PUNCHES FOR HEAVY DUTY
BS EN ISO 19715 : 2017	DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE
I.S. EN ISO 898-2:2012	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
BS ISO 9448-10 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 10: FORM E, GLIDING BUSHES, FLANGED, TYPE 2
BS EN ISO 14998 : 2013	PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES
API 5DP CHINESE : 2009	SPECIFICATION FOR DRILL PIPE
BS ISO 7689 : 2008	AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT SPECIFICATION
17/30303088 DC : 0	BS EN ISO 7492 - DENTISTRY - DENTAL EXPLORER
16/30327501 DC : 0	BS ISO 1711-2 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 2: MACHINE-OPERATED SOCKETS (IMPACT)
API SPEC 11B CHINESE : 2010	SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES
07/30144587 DC : 0	BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25%
17/30361675 DC : 0	BS EN 3299 - AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER-PLATED - TECHNICAL SPECIFICATION
I.S. EN 4700-003:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
PREN 10088-3 : DRAFT 2011	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNE EN ISO 17937 : 2016	DENTISTRY - OSTEOTOME (ISO 17937:2015)
DIN ISO 4498 E : 2005	SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS
NBR 15893-3 : 2010	ORTHOPEDIC IMPLANTS - METALLIC MATERIALS - PART 3: WROUGHT NITROGEN STRENGTHENED 23MANGANESE-21CHROMIUM-1MOLYBDENUM LOW-NICKEL STAINLESS STEEL ALLOY BAR AND WIRE (UNS S29108)
DIN EN 16630 E : 2015	PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
DIN ISO 7331:2011-10	SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS (ISO 7331:2011)
10/30196135 DC : 0	BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
UNI EN ISO 22068 : 2014	SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS
13/30252560 DC : 0	BS ISO 7241-1 - HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 1: DIMENSIONS AND REQUIREMENTS
S.R. CWA 17094-3:2016	POLICE FIREARMS TECHNOLOGY - PART 3: POLICE SHOTGUN AMMUNITION FEATURES - RECOMMENDATIONS
I.S. EN 10083-1:2006	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
14/30301841 DC : 0	BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
UNI EN 4700-004 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
BS ISO 18869 : 2017	HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS
15/30269176 DC : 0	BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS
11/30254171 DC : 0	BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 16602-70-46:2014	SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS
BS ISO 4498 : 2005	SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS
I.S. EN ISO 9809-3:2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
08/30168345 DC : DRAFT JULY 2008	BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
ISO 683-14 : 2004	HEAT TREATED STEELS, ALLOY STEELS AND FREE CUTTING STEELS - STEELS FOR HOT FORMED AND HEAT TREATED SPRINGS
10/30216835 DC : 2010	BS ISO 7331 - SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS
15/30248084 DC : 0	BS ISO 11949 - COLD-REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE
07/30107797 DC : 0	BS EN 14399-9 - HIGH STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - BOLT AND NUT ASSEMBLIES WITH DIRECT TENSION INDICATORS
NF EN ISO 9809-1 : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
UNI EN ISO 9809-1 : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
UNI EN 4700-006 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
DIN EN 657 E : 2005	THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION
PREN 4111 : 200P2	AEROSPACE SERIES - WRENCHES, SPLINED, SOCKETS FOR PIPE FITTINGS - TECHNICAL SPECIFICATION
BS EN ISO 18556 : 2016	DENTISTRY - INTRAORAL SPATULAS
BS EN ISO 17945 : 2015	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
13/30280533 DC : 0	BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25%
07/30162947 DC : 0	BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
03/306713 DC : DRAFT APR 2003	EN 657 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION
DIN ISO 12844 E : 2006	RAW OPTICAL GLASS - GRINDABILITY WITH DIAMOND PELLETS - TEST METHOD AND CLASSIFICATION
BS EN 4700-007 : 2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
VDI/VDE 2616-2 : 2014	HARDNESS TESTING OF PLASTICS AND ELASTOMERS
03/311760 DC : DRAFT JULY 2003	ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
12/30246399 DC : 0	BS ISO 11749 - BELT DRIVE - V-RIBBED BELTS FOR THE AUTOMOTIVE INDUSTRY - FATIGUE TEST
BS ISO 9657 : 2004	PLIERS AND NIPPERS FOR ELECTRONICS - GENERAL TECHNICAL REQUIREMENTS
I.S. EN 4700-002:2016	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
ISO 10384 : 2012	HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION
BS ISO 9448-11 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 11: FORM F, BALL CAGE BUSHES, FLANGED, TYPE 2
NACE MR 0175 ISO 15156-1 : 2015	PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 1: GENERAL PRINCIPLES FOR SELECTION OF CRACKING-RESISTANT MATERIALS - PART 2: CRACKING-RESISTANT CARBON AND LOWALLOY STEELS, AND THE USE OF CAST IRONS - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS
12/30245294 DC : 0	BS ISO 16635-1 - DENTISTRY - DENTAL DAM TECHNIQUE - PART 1: HOLE PUNCH
BS EN ISO 9809-3 : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS (ISO 9809-3:2010)
VDI 3405 Blatt 2 : 2013	Additive manufacturing processes, rapid manufacturing- Beam melting of metallic parts- Qualification, quality assurance and post processing
BS ISO 5857 : 2008	AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1250 MPA - PROCUREMENT SPECIFICATION
BS ISO 10071-1 : 2008	TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 1: BALL-LOCK PUNCHES FOR LIGHT DUTY
BS ISO 16635-1 : 2013	DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH
BS EN 16602-70-46 : 2014	SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS
BS EN ISO 14917 : 2017	THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017)
13/30247437 DC : 0	BS EN ISO 683-17 - HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013)
BS ISO 9448-2 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 2: FORM A, GLIDING BUSHES, PLAIN, TYPE 1
15/30323936 DC : 0	BS EN 3833 - AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
13/30255310 DC : 0	BS EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
17/30315891 DC : 0	BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS
16/30297742 DC : DRAFT JUNE 2016	BS EN ISO 19490 - DENTISTRY - SINUS MEMBRANE ELEVATOR
10/30197302 DC : 0	BS ISO 22068 - SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS
DIN 6773:2001-04	HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS
04/30074927 DC : DRAFT JUN 2004	EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T)
(INACTIVE RECORD) DIN ISO 15787:2010-01	TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS
DIN EN ISO 17945:2015-08	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
DIN EN 16451 E : 2015	RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
ISO/DIS 18137-1 : 40.98 (2014)	LEAF SPRINGS - PART 1: TECHNICAL REQUIREMENTS AND TEST METHODS
API 5CRA CHINESE : 2011	SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
BS PD CEN/TS 16700 : 2014	PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE
13/30286138 DC : 0	BS EN 16654 - CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 9809-2:2010-10	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
UNE EN ISO 12679 : 2016	THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011)
11/30254168 DC : 0	BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN ISO 9809-2 E : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
17/30323194 DC : 0	BS EN ISO 20569 - DENTISTRY - TREPHINE BURS
BS EN 4700-003 : 2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
BS EN ISO 15156-3 : 2015	PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015)
DIN ISO 10071-1 E : 2010	TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 1: BALL-LOCK PUNCHES FOR LIGHT DUTY
DIN EN 16281:2013-04	CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
13/30248090 DC : 0	BS ISO 11951 - COLD-REDUCED BLACKPLATE IN COIL FORM FOR THE PRODUCTION OF TINPLATE OR ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL
BS ISO 9182-2 : 2013	TOOLS FOR PRESSING - GUIDE PILLARS - PART 2: TYPE A, STRAIGHT PILLARS
DIN EN ISO 17945 E : 2015	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
DIN ISO 7331 E : 2011	SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS (ISO 7331:2011)
UNI EN ISO 15630-3 : 2010	STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
05/30133728 DC : DRAFT MAY 2005	EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
API 5DP : 2010(R2015)	SPECIFICATION FOR DRILL PIPE
11/30210148 DC : 0	BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES
BS ISO 9448-8 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 8: FORM G, GLIDING BUSHES, STEPPED, TYPE 1
S.R. CWA 17094-1:2016	POLICE FIREARMS TECHNOLOGY - PART 1: POLICE PISTOL AND RIFLE AMMUNITION FEATURES - RECOMMENDATIONS
DIN EN ISO 9809-3:2010-10	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
BS ISO 9182-5 : 2013	TOOLS FOR PRESSING - GUIDE PILLARS - PART 5: TYPE D, END-LOCKING PILLARS WITH FLANGE
PREN 1426 : DRAFT 2013	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
DIN EN ISO 17937:2016-01	DENTISTRY - OSTEOTOME (ISO 17937:2015)
UNI EN ISO 16635-1 : 2014	DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH
PREN 10088-2 : DRAFT 2011	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
ISO 9154 : 2016	AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF HEAT-RESISTANT NICKEL-BASED ALLOY, STRENGTH CLASS 1550 MPA - PROCUREMENT SPECIFICATION
BS ISO 26910-1 : 2009	SPRINGS - SHOT PEENING - PART 1: GENERAL PROCEDURES
API 5CRA : 2010 : INC : ERR 1 : 2011	SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
DIN EN ISO 26443 E : 2016	FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008)
(INACTIVE RECORD) API 16A : 2017	SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
UNE EN ISO 19490 : 2018	DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017)
13/30264474 DC : 0	BS ISO 17541 - PLASTICS - QUANTITATIVE EVALUATION OF SCRATCH-INDUCED DAMAGE AND SCRATCH VISIBILITY
17/30323197 DC : 0	BS EN ISO 20570 - DENTISTRY - ORAL SURGICAL SCALPEL HANDLE
BS ISO 26443 : 2008	FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS
12/30258463 DC : 0	BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
BS EN ISO 12670 : 2015	THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS
BS ISO 9182-4 : 2013	TOOLS FOR PRESSING - GUIDE PILLARS - PART 4: TYPE C, PILLARS WITH TAPER LEAD AND BUSH
BS EN 4700-005 : 2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
ISO 5287 : 2003(R2015)	BELT DRIVES - NARROW V-BELTS FOR THE AUTOMOTIVE INDUSTRY - FATIGUE TEST
BS EN ISO 9809-2 : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
15/30314608 DC : 0	BS EN ISO 7153-1 - SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS
16/30302541 DC : 0	BS EN ISO 19715 - DENTISTRY - FILLING INSTRUMENTS WITH CONTRA SET
BS ISO 4254-13 : 2012	AGRICULTURAL MACHINERY - SAFETY - PART 13: LARGE ROTARY MOWERS
BS ISO 16143-1 : 2014	STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: CORROSION-RESISTANT FLAT PRODUCTS
DIN ISO 15787 E : 2010	TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS
UNE EN 16281 : 2013	CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
06/30151815 DC : 0	BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS
UNE EN ISO 22068 : 2014	SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012)
BS ISO 12679 : 2011	THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
UNE-EN 71-1:2015	SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
10/30165712 DC : 0	BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD
BS ISO 6336-5 : 2016	CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS
15/30332554 DC : 0	BS EN 14399-9 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
17/30344532 DC : 0	BS ISO 6502-3 - RUBBER - MEASUREMENT OF VULCANIZATION CHARACTERISTICS USING CUREMETERS - PART 3: ROTORLESS CUREMETER
08/30182457 DC : DRAFT JULY 2008	BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
BS EN ISO 17937 : 2015	DENTISTRY - OSTEOTOME
14/30294825 DC : 0	BS EN 10263-1 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN ISO 898-2 E : 2012	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
DIN EN ISO 3266 E : 2016	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015)
DIN EN 71-1 E : 2015	SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
I.S. EN 3389:2009	AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREE C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
BS ISO 9448-3 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 3: FORM B, BALL CAGE BUSHES, PLAIN, TYPE 1
DIN EN ISO 17937 E : 2016	DENTISTRY - OSTEOTOME (ISO 17937:2015)
BS ISO 9809-4 : 2014	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA
11/30253929 DC : 0	BS EN 4820 - AEROSPACE SERIES - COPPER AND COPPER ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION
05/30136401 DC : DRAFT JULY 2005	ISO 8642 - AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - TEST METHODS
17/30352970 DC : 0	BS EN ISO 15630-3 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
11/30230615 DC : 0	BS ISO 683-1 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING
DIN EN ISO 12679 E : 2015	THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011)
17/30359115 DC : 0	BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD
BS ISO 12891-2 : 2014	RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS
12/30246071 DC : 0	BS ISO 15787 - TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS
13/30252136 DC : 0	BS ISO 16468 - INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) - GENERAL TECHNICAL REQUIREMENTS
PREN 3302 : 200P2	AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION
BS ISO 404 : 2013	STEEL AND STEEL PRODUCTS - GENERAL TECHNICAL DELIVERY REQUIREMENTS
DIN EN ISO 7866:2013-01	GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012)
15/30312459 DC : 0	BS EN ISO 5182 - RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT
15/30304304 DC : 0	BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
15/30297745 DC : 0	BS EN ISO 9173-1 - DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS
12/30258615 DC : 0	BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION
BS ISO 20957-1 : 2005	STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
14/30275471 DC : 0	BS ISO 18137-1 - LEAF SPRINGS - PART 1: TECHNICAL REQUIREMENTS AND TEST METHODS
17/30361645 DC : DRAFT SEP 2017	BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
BS ISO 11119-4 : 2016	GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS UP TO 150 L WITH LOAD-SHARING WELDED METALLIC LINERS
BS EN ISO 7866 : 2012	GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING
ISO 16468 : 2015	INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) GENERAL TECHNICAL REQUIREMENTS
06/30148179 DC : DRAFT SEP 2006	ISO 9809-3 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
12/30251283 DC : 0	BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA
DD CEN/TS 1071-8 : 2004	ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 8: ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION
ABMA ISO 14190 : 1997	AEROSPACE - AIRFRAME ROLLING BEARINGS: BALL AND SPHERICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION
BS EN ISO 15630-3 : 2010	STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
DIN EN 893 E : 2011	MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS
BS ISO 11515 : 2013	GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
17/30330552 DC : 0	BS ISO 4954 - STEELS FOR COLD HEADING AND COLD EXTRUDING
17/30335249 DC : 0	BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES
BS ISO 5182 : 2008	RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT
BS ISO 6932 : 2014	COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25%
11/30230612 DC : 0	BS ISO 683-11 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS
13/30242622 DC : 0	BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS
API 14L : 2007 : R2012	SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
API 6DSS : 2017-08	SPECIFICATION FOR SUBSEA PIPELINE VALVES
04/30107683 DC : DRAFT DEC 2004	BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS
04/30103964 DC : DRAFT MAY 2004	BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES
BS EN ISO 9873 : 2017	DENTISTRY - INTRA-ORAL MIRRORS
I.S. EN ISO 19490:2017	DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017)
DIN EN ISO 14917 : 2015	THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017)
BS ISO 18137 : 2015	LEAF SPRINGS - TECHNICAL SPECIFICATIONS
BS ISO 14661 : 2000	THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS
02/106220 DC : 0	BS EN 14566 - MECHANICAL FASTENERS FOR PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
05/30136491 DC : DRAFT JUL 2005	EN 15311 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS
API 11D1 REDLINE : 2009	PACKERS AND BRIDGE PLUGS
UNE EN ISO 18556 : 2016	DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016)
05/30132585 DC : DRAFT APR 2005	EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
BS EN ISO 3266 : 2010	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010+A1:2015)
06/30159843 DC : 0	BS ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION - RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
05/30128668 DC : DRAFT FEB 2005	ISO 7689 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT
API 11D3 : 2008 : R2015	PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
PREN 2576 : 200P2	AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
BS A363(2000) : 2000	BOLTS, WITH MJ THREADS, MADE OF HEAT-RESISTANT NICKEL-BASED ALLOY, STRENGTH CLASS 1550 MPA - PROCUREMENT SPECIFICATION
03/313799 DC : DRAFT AUG 2003	ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
API 19G2 : 2010	FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
UNE EN 16630 : 2015	PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
UNE EN ISO 9873 : 2017	DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
BS EN 71-1 : 2014	SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
ABMA 10A : 2001	METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES
ISO 9448-5 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 5: FORM D, BALL CAGE BUSHES, HEADED, TYPE 1
API 20A : 2017	CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
05/30132603 DC : DRAFT APR 2005	EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
05/30126202 DC : 0	EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
NBR 15628-3 : 2013	IMPLANTS FOR SURGERY - METALLIC COMPONENTS - PART 3: SPECIFICATIONS FOR COBALT 28-CHROMIUM 6-MOLYBDENUM ALLOY FORGINGS
BS ISO 5743 : 2004	PLIERS AND NIPPERS - GENERAL TECHNICAL REQUIREMENTS
BS EN ISO 898-2 : 2012	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
ABMA 10A : 2001 : R2015	METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES
12/30250146 DC : 0	BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS
PREN 12697-31 : DRAFT 2014	BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
ISO 11119-3 : 2013(R2018)	GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH NON-LOAD-SHARING METALLIC OR NON-METALLIC LINERS
BS 2000-49(2015) : 2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
BS EN ISO 17078-3 : 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
BS ISO 13628-10 : 2005 AMD 16775	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE
06/30148176 DC : DRAFT SEP 2006	ISO 9809-2 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
ABMA 10A : 2001 : R2008	METAL BALLS FOR UNGROUND BEARINGS AND OTHER USES
08/30190263 DC : DRAFT SEP 2008	BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
BS EN 3685 : 2008	AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION
05/30132598 DC : DRAFT APR 2005	EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS
03/314809 DC : DRAFT SEP 2003	EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
BS 2A295(2000) : 2000	NUTS, SELF-LOCKING, WITH MAXIMUM OPERATING TEMPERATURE LESS THAN OR EQUAL TO 425 DEGREE C - TEST METHODS
BS EN 10263-1 : 2017	STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN ISO 9809-1:2010-10	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
BS EN 10083-3 : 2006-08	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
API 19G4 : 2011	PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
API SPEC 16F : 2017	SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT
BS EN ISO 12156-1 : 2016	DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD
DIN EN 10083-3 E : 2007	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
API 11B : 2010	SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES
UNE EN 14399-1 : 2016	HIGH STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
PREN 3302 : 200P2	AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION
I.S. EN ISO 17945:2015	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
SBAC TS 220 : 1	TECHNICAL SPECIFICATION FOR UNION NUTS, SELF-LOCKING (UNIFIED THREADS) - HIGH TEMPERATURE NICKEL ALLOY INCONEL 718 CLASSIFICATION R[M] >= 1270 MPA (185000 LBF/IN[2]) @ T[A]/+705 DEGREES C
BIS IS 1586-3 : 2012	METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (SCALES, A, B, C, D, E, F, G, H, K, N, T)
ISO 9448-11 : 2013(R2019)	TOOLS FOR PRESSING - GUIDE BUSHES - PART 11: FORM F, BALL CAGE BUSHES, FLANGED, TYPE 2
UNI EN ISO 9809-2 : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
API SPEC 16C : 2015	CHOKE AND KILL EQUIPMENT
DIN EN ISO 12690:2011-04	Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010)
DIN EN ISO 15630-3 E : 2011	STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
NF EN ISO 11961 : 2010	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
IS 1367 : Part 3 : 2017	TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS
ISO 898-3 : 1ED 2018	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES
DIN EN ISO 9809-3 E : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
BS EN 10088-4 : 2009	STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
ISO 6787 : 2018	ASSEMBLY TOOLS FOR SCREWS AND NUTS - ADJUSTABLE WRENCHES
DIN EN ISO 19490 E : 2017	DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017)
I.S. EN ISO 12670:2015	THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011)
PREN 71-1 : DRAFT 2014	SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
ASTM A 1058M : 2009	TEST METHODS FOR MECHANICAL TESTING OF STEEL PRODUCTS - METRIC
ISO 15787 : 2016	TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS
ISO 14661 : 2000	THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS
NF EN 3685 : 2008	AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION
API SPEC 14L : 2007	SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
PREN 4111 : 200P2	AEROSPACE SERIES - WRENCHES, SPLINED, SOCKETS FOR PIPE FITTINGS - TECHNICAL SPECIFICATION
PREN 4359 : 200P1	AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS - TECHNICAL SPECIFICATION
I.S. EN 16281:2013	CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 19715:2017	DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017)
PREN 2576 : 200P2	AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C - TECHNICAL SPECIFICATION
(INACTIVE RECORD) API 14L : 2007	SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
API SPEC 19AC : 2016	SPECIFICATION FOR COMPLETION ACCESSORIES
PREN 4700-002 : 200P3	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
API 17J REDLINE : 2008	SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
I.S. EN ISO 17937:2015	DENTISTRY - OSTEOTOME (ISO 17937:2015)
API 14A RUSSIAN : 2001	SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
(INACTIVE RECORD) API 5CRA : 2010	SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
API 19G3 : 2011	RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
ISO 10432 : 2004(R2014)	PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
ISO 17541 : 2014	PLASTICS - QUANTITATIVE EVALUATION OF SCRATCH-INDUCED DAMAGE AND SCRATCH VISIBILITY
API SPEC 17K : 2017	SPECIFICATION FOR BONDED FLEXIBLE PIPE
BS EN ISO 12679 : 2015	THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
UNE-EN ISO 12156-1:2016	DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016)
DIN EN 14399-9 : 2016	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
API 11D1 CHINESE : 2009	PACKERS AND BRIDGE PLUGS
EN ISO 12156-1 : 2016	DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016)
ANSI/NACE MR 01 03/ISO 17495-1:2016	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
NBR 16464 : 2016	PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS
BS EN ISO 11961 : 2008	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
I.S. EN ISO 12679:2015	THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011)
ISO 683-1 : 2016	HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 1: NON-ALLOY STEELS FOR QUENCHING AND TEMPERING
API SPEC 17J : 2014	SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ISO 9448-9 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 9: FORM B, BALL CAGE BUSHES, PLAIN, TYPE 2
ISO 10303-214 : 2010	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 214: APPLICATION PROTOCOL: CORE DATA FOR AUTOMOTIVE MECHANICAL DESIGN PROCESSES
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018	SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
I.S. EN 16451:2015	RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
ISO 8124-1 : 2018	SAFETY OF TOYS - PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES
I.S. EN 1627:2011	PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - REQUIREMENTS AND CLASSIFICATION
UNE 16559 : 2000	PIPE CUTTING TOOLS - PLASTIC AND COPPER PIPE AUTOMATIC CUTTERS - SPECIFICATIONS AND TESTS
I.S. EN ISO 22068:2014	SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012)
I.S. EN ISO 26443:2016	FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION OF CERAMIC COATINGS (ISO 26443:2008)
ISO 9448-8 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 8: FORM G, GLIDING BUSHES, STEPPED, TYPE 1
BS EN ISO 7492 : 2018	DENTISTRY - DENTAL EXPLORER (ISO 7492:2018)
NF EN ISO 12690 : 2011	METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
UNI EN 15638 : 2009	ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS
ISO 15630-3 : 2010(R2014)	STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
I.S. EN 15638:2009	ICE SKATES - SAFETY REQUIREMENTS AND TEST METHODS
UNI EN 1627 : 2011	PEDESTRIAN DOORSETS, WINDOWS, CURTAIN WALLING, GRILLES AND SHUTTERS - BURGLAR RESISTANCE - REQUIREMENTS AND CLASSIFICATION
DIN EN ISO 19490 : 2016	DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017)
I.S. EN 4700-001:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
I.S. EN ISO 16635-1:2014	DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013)
I.S. EN ISO 20957-1:2013	STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS (ISO 20957-1:2013)
UNI EN 71-1 : 2015	SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
I.S. EN 893:2010	MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 3833:2005	AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION
ISO 15461 : 2018	STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS
I.S. EN 62271-202:2014	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
UNI EN 16281 : 2013	CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 14998:2013	PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013)
ISO 12753-2 : 1999	COMPASSES - PART 2: REQUIREMENTS, DESIGNATION AND MARKING
I.S. EN ISO 9809-2:2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
ISO 5718 : 2013	HARVESTING EQUIPMENT - BLADES FOR AGRICULTURAL ROTARY MOWERS - REQUIREMENTS
I.S. EN 16630:2015	PERMANENTLY INSTALLED OUTDOOR FITNESS EQUIPMENT - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 15156-3:2015&LC:2015	PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015)
EN 71-1 : 2014	SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
BS ISO 4960 : 2007	COLD-REDUCED CARBON STEEL STRIP WITH A MASS FRACTION OF CARBON OVER 0,25%
I.S. EN ISO 3266:2010	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010)
ISO 11119-1 : 2012(R2018)	GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 1: HOOP WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L
ISO 4875-2 : 2006(R2017)	METAL-CUTTING BAND SAW BLADES - PART 2: CHARACTERISTICS AND DIMENSIONS
PREN ISO 683-17 : DRAFT 2013	HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO/DIS 683-17:2013)
I.S. EN ISO 9873:2017	DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
EN ISO 11961 : 2008 COR 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
BS ISO 1711-2 : 2016	ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 2: MACHINE-OPERATED SOCKETS (IMPACT)
ISO 9873 : 2017	DENTISTRY - INTRA-ORAL MIRRORS
ISO 11951 : 2016	COLD-REDUCED TINMILL PRODUCTS - BLACKPLATE
I.S. EN ISO 17078-4:2010	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
I.S. EN ISO 18556:2016	DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016)
ONORM EN 3685 : 2008	AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA/650 DEGREES C - TECHNICAL SPECIFICATION
ISO 22034-1 : 2007(R2017)	STEEL WIRE AND WIRE PRODUCTS - PART 1: GENERAL TEST METHODS
UNE EN ISO 16635-2 : 2015	DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014)
ISO 18869 : 2017	HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS
EN ISO 7492 : 2018	DENTISTRY - DENTAL EXPLORER (ISO 7492:2018)
ISO 7689 : 2008(R2013)	AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT SPECIFICATION
I.S. EN 4700-004:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE
ISO 7481 : 2000(R2016)	AEROSPACE - NUTS, SELF-LOCKING, WITH MAXIMUM OPERATING TEMPERATURE LESS THAN OR EQUAL TO 425 DEGREES C - TEST METHODS
DIN EN ISO 9873 E : 2000	DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
DIN EN ISO 15630-3:2011-02	STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
ISO 13584-511 : 2006(2018)	INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 511: MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE - REFERENCE DICTIONARY FOR FASTENERS
BS ISO 1711-1 : 2016	ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 1: HAND-OPERATED WRENCHES AND SOCKETS
I.S. EN ISO 7866:2012	GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012)
UNE EN ISO 16635-1 : 2014	DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013)
I.S. EN 12697-31:2007	BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
UNE EN ISO 898-2 : 2013	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
UNE EN ISO 14917 : 2017	THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017)
ISO 18137 : 2015	LEAF SPRINGS - TECHNICAL SPECIFICATIONS
DIN EN ISO 19715 : 2016	DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017)
PREN 12797 : DRAFT 2017	BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
UNE ISO 289-1 : 2018	RUBBER, UNVULCANIZED - DETERMINATIONS USING A SHEARING-DISC VISCOSIMETER - PART 1: DETERMINATION OF MOONEY VISCOSITY
EN 3833 : 2004	AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION
ISO 11119-2 : 2012(R2018)	GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS AND TUBES - DESIGN, CONSTRUCTION AND TESTING - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES UP TO 450 L WITH LOAD-SHARING METAL LINERS
ISO 16143-1 : 2014	STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: CORROSION-RESISTANT FLAT PRODUCTS
I.S. EN ISO 16635-2:2014	DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014)
17/30359541 DC : 0	BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
ISO 8642 : 2008(R2016)	AEROSPACE - SELF LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - TEST METHODS
BS 2000-49(2007) : 2007	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
UNI EN 14399-9 : 2009	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
I.S. EN 4700-007:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
NF EN ISO 15630-3 : 2010	STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEELS
PREN 4700-002 : 200P3	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
BS EN 14399-9 : 2009	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
DIN EN 14399-9 E : 2009	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
ISO 9656 : 2004(R2013)	PLIERS AND NIPPERS FOR ELECTRONICS - TEST METHODS
UNI EN 10088-4 : 2009	STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
DIN EN 12697-31 E : 2007	BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
ISO 16936-2 : 2005(R2017)	GLASS IN BUILDING - FORCED-ENTRY SECURITY GLAZING - PART 2: TEST AND CLASSIFICATION BY REPETITIVE IMPACT OF A HAMMER AND AXE AT ROOM TEMPERATURE
18/30368675 DC : 0	BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
14/30310358 DC : 0	BS EN 12697-31 - BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
UNE EN 10205 : 2017	COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
ISO 11119-4 : 2016	GAS CYLINDERS - REFILLABLE COMPOSITE GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS UP TO 150 L WITH LOAD-SHARING WELDED METALLIC LINERS
ASTM E 18 : 2017-08	TEST METHODS FOR ROCKWELL HARDNESS OF METALLIC MATERIALS
NF EN ISO 17078-3 : 2010	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
UNI EN 4700-001 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
NF ISO 7331 : 2011	SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS
UNE EN 10088-4 : 2010	STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
UNE EN ISO 7866 : 2013	GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012/COR 1:2014)
NF EN 3389 : 2009	AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
NF EN ISO 3266 : 2010 AMD 1 2016	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES
UNI EN ISO 20957-1 : 2013	STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN ISO 11961:2008	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ASTM A 1058 : 2014 : REDLINE	Standard Test Methods for Mechanical Testing of Steel Products—Metric
I.S. EN 3685:2008	AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/650 DEGREE C - TECHNICAL SPECIFICATION
UNI EN ISO 7866 : 2012	GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING
NF EN 3388 : 2009	AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
UNI EN 4700-007 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK
UNI EN ISO 17078-3 : 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
I.S. EN 4700-006:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
ISO 5857 : 2008(R2014)	AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1250 MPA - PROCUREMENT SPECIFICATION
ISO 4254-13 : 2012	AGRICULTURAL MACHINERY - SAFETY - PART 13: LARGE ROTARY MOWERS
BS ISO 5718 : 2013	HARVESTING EQUIPMENT - BLADES FOR AGRICULTURAL ROTARY MOWERS - REQUIREMENTS
EN 12697-31 : 2007	BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR
EN ISO 9873 : 2017	DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017)
I.S. EN ISO 12156-1:2016	DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016)
EN 10083-3 : 2006 COR 2008	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
DIN EN ISO 16635-2 E : 2014	DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014)
BIS IS 3660-7 : 2013	METHODS OF TEST FOR NATURAL RUBBER - PART 7: DETERMINATION OF MOONEY VISCOSITY
14/30248087 DC : 0	BS ISO 11950 - COLD-REDUCED ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL
15/30278527 DC : 0	BS EN ISO 18559 - DENTISTRY - EXTRAORAL SPATULAS FOR MIXING DENTAL CEMENTS
14/30261090 DC : 0	BS EN ISO 17937 - DENTISTRY - OSTEOTOME FOR BONE COMPACTION AND SINUS FLOOR ELEVATION
NBR ISO 500-3 : 2016	AGRICULTURAL TRACTORS - REAR-MOUNTED POWER TAKE-OFF TYPES 1, 2 AND 3 - PART 3: MAIN PTO DIMENSIONS AND SPLINE DIMENSIONS, LOCATION OF PTO
UNI EN ISO 898-2 : 2012	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
ONORM EN ISO 11961 : 2010	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ISO 2415 : 2004(R2007)	FORGED SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES
UNI EN 4700-003 : 2011	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE
PREN 12080 : DRAFT 2015	RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
API 19G1 : 2010	SIDE-POCKET MANDRELS
BS EN 3833 : 2004	AEROSPACE SERIES - BOLTS, MJ THREADS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), PASSIVATED - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C - TECHNICAL SPECIFICATION
ISO 11950 : 2016	COLD-REDUCED TINMILL PRODUCTS - ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE-COATED STEEL
(INACTIVE RECORD) DIN ISO 12844:2006-11	RAW OPTICAL GLASS - GRINDABILITY WITH DIAMOND PELLETS - TEST METHOD AND CLASSIFICATION
DIN EN 10205 E : 2017	COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
UNE EN ISO 12690 : 2011	METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
DIN EN ISO 9809-1 E : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA
I.S. EN ISO 15630-3:2010	STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
ISO 9182-5 : 2013	TOOLS FOR PRESSING - GUIDE PILLARS - PART 5: TYPE D, END-LOCKING PILLARS WITH FLANGE
ISO 12891-2 : 2014	RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2 - ANALYSIS OF RETRIEVED METALLIC SURGICAL IMPLANTS
ISO 6932 : 2014	COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25%
ISO 15601 : 2000(R2016)	HAMMERS - TECHNICAL SPECIFICATIONS CONCERNING STEEL HAMMER HEADS - TEST PROCEDURES
(INACTIVE RECORD) DIN EN 10218-1:2012-03	STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
ISO 12156-1 : 2016	DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD
ISO 11515 : 2013	GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
EN ISO 15630-3 : 2010	STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL
ISO 1711-1 : 2016	ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 1: HAND-OPERATED WRENCHES AND SOCKETS
ISO 9809-4 : 2014	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA
DIN EN 71-1:2015-02	SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
UNI EN ISO 11961 : 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ISO 16936-1 : 2005(R2017)	GLASS IN BUILDING - FORCED-ENTRY SECURITY GLAZING - PART 1: TEST AND CLASSIFICATION BY REPETITIVE BALL DROP
EN 10083-1 : 2006	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
ISO 6336-5 : 2016	CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS
API 14L CHINESE : 2007	SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
I.S. EN 10088-4:2009	STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES
I.S. EN 10083-3:2006	STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS
ISO 4960 : 2007(R2011)	COLD-REDUCED CARBON STEEL STRIP WITH A MASS FRACTION OF CARBON OVER 0,25%
ISO 9448-6 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 6: FORM E, GLIDING BUSHES, FLANGED, TYPE 1
I.S. EN 14399-9:2009	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES
I.S. EN ISO 12690:2010	METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
ISO 1711-2 : 2016	ASSEMBLY TOOLS FOR SCREWS AND NUTS - TECHNICAL SPECIFICATIONS - PART 2: MACHINE-OPERATED SOCKETS (IMPACT)
ISO 9182-2 : 2013	TOOLS FOR PRESSING - GUIDE PILLARS - PART 2: TYPE A, STRAIGHT PILLARS
I.S. EN 4700-005:2010	AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK
ISO 10071-2 : 2005(R2016)	TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 2: BALL-LOCK PUNCHES FOR HEAVY DUTY
I.S. EN 71-1:2014	SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
ISO 683-11 : 2012	HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 11: CASE-HARDENING STEELS
I.S. EN 10263-1:2017	STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
ISO 9657 : 2004(R2018)	PLIERS AND NIPPERS FOR ELECTRONICS - GENERAL TECHNICAL REQUIREMENTS
ISO 9448-2 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 2: FORM A, GLIDING BUSHES, PLAIN, TYPE 1
ISO 9448-3 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 3: FORM B, BALL CAGE BUSHES, PLAIN, TYPE 1
I.S. EN ISO 7492:2018	DENTISTRY - DENTAL EXPLORER (ISO 7492:2018)
ISO 7492 : 2018	DENTISTRY - DENTAL EXPLORER
ISO 26910-1 : 2009(R2014)	SPRINGS - SHOT PEENING - PART 1: GENERAL PROCEDURES
I.S. EN ISO 17078-3:2009	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS
ISO 9448-4 : 2013	TOOLS FOR PRESSING - GUIDE BUSHES - PART 4: FORM C, GLIDING BUSHES, HEADED, TYPE 1
ISO 9182-4 : 2013	TOOLS FOR PRESSING - GUIDE PILLARS - PART 4: TYPE C, PILLARS WITH TAPER LEAD AND BUSH
UNE-EN 10088-2:2015	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 3388:2009	AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
ISO 289-1 : 2015	RUBBER, UNVULCANIZED - DETERMINATIONS USING A SHEARING-DISC VISCOMETER - PART 1: DETERMINATION OF MOONEY VISCOSITY
EN 1426 : 2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
I.S. EN 3299:2007	AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION
EN ISO 17078-2 : 2007 COR 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
ISO 3506-1 : 2009(R2015)	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
EN ISO 13533 : 2001 COR 2006	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT
EN ISO 17078-1 : 2004 AMD 1 2010	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
ISO 3506-3 : 2009(R2015)	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS
ONORM EN ISO 9809-3 : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS
DIN EN 10083-1:2006-10	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 1426:2015-09	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
DIN EN ISO 683-17:2015-02	HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014)
EN ISO 13628-2 : 2006 COR 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN 10084 E : 2008	CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN ISO 3506-3:2010-04	Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009)
DIN EN 10218-1 E : 2012	STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
DIN EN 12080 E : 2017	RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
(INACTIVE RECORD) DIN EN 12513:2011-05	FOUNDING - ABRASION RESISTANT CAST IRONS
(INACTIVE RECORD) DIN EN 10088-2:2014-12	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN ISO 14920 E : 2015	THERMAL SPRAYING - SPRAYING AND FUSING OF SELF-FLUXING ALLOYS (ISO 14920:2015)
DIN EN ISO 4498 E : 2010	SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS
(INACTIVE RECORD) DIN EN ISO 3506-2:2010-04	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
DIN EN ISO 15156-2:2015-12	PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
(INACTIVE RECORD) DIN EN 10208-2:2009-07	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
DIN EN ISO 6508-2:2015-06	METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015)
(INACTIVE RECORD) DIN EN ISO 3506-1:2010-04	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
DIN EN ISO 683-17 E : 2015	HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:2014)
DIN EN 10208-1:2009-07	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
DIN EN ISO 6508-3:2015-06	METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6508-3:2015)
DIN EN 12513 E : 2011	FOUNDING - ABRASION RESISTANT CAST IRONS
DIN EN 10208-1 E : 1998	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
DIN EN 14399-1:2015-04	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 9173-1 E : 2017	DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016)
DIN EN 957-1:2005-11	STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 10083-1 E : 2006	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
(INACTIVE RECORD) DIN EN 356:2000-02	GLASS IN BUILDING - SECURITY GLAZING - TESTING AND CLASSIFICATION OF RESISTANCE AGAINST MANUAL ATTACK
DIN EN 10088-2 E : 2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 893:2011-02	MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 957-1 E : 1999	STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 1097-2 : 2016	TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
DIN EN 12504-2 E : 2012	TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
DIN EN ISO 14920:2015-04	THERMAL SPRAYING - SPRAYING AND FUSING OF SELF-FLUXING ALLOYS (ISO 14920:2015)
DIN EN 15049 E : 2007	RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
DIN EN 10084:2008-06	CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN ISO 18265:2014-02	METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
(INACTIVE RECORD) DIN EN 843-4:2005-08	ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS
DIN EN ISO 11960:2014-05	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
DIN EN 10089:2003-04	HOT ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS
DIN EN 1097-2 E : 2010	TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
DIN EN 14566 E : 2009	MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN ISO 6508-2 E : 2015	METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015)
DIN EN ISO 18265 E : 2014	METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
DIN EN ISO 898-1:2013-05	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
DIN EN 14772 E : 2005	FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE EN 1514 AND EN 12560 SERIES OF STANDARDS
DIN EN 843-4 E : 2005	ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS
DIN EN ISO 15156-2 E : 2015	PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 151562:2015)
DIN EN 12080 : 2015	RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
DIN EN 1426 E : 2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
DIN EN 14566:2009-10	MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
DIN EN ISO 4498:2010-11	Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
(INACTIVE RECORD) DIN EN 10132-2:2000-05	COLD-ROLLED NARROW STEEL STRIP FOR HEAT-TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 2: CASE HARDENING STEELS
DIN EN 10297-1:2003-06	SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN ISO 6508-3 E : 2015	METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6508-3:2015)
DIN EN 15049:2007-12	RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
DIN EN ISO 898-5:2012-09	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012)
BS EN ISO 3506-1 : 2009	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
BS EN ISO 14310 : 2008	PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS
BS EN ISO 13628-2 : 2006	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
UNE EN ISO 898-1 : 2015	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
DIN EN ISO 898-5 E : 2012	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012)
BS EN 3302 : 2017	AEROSPACE SERIES - BOLTS IN HEAT RESISTING STEEL FE-PM1708 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - TECHNICAL SPECIFICATION
BS EN 12504-2 : 2012	TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
UNE EN 12504-2 : 2013	TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
BS EN 10089 : 2002	HOT ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS
CSA B51 : 2014	BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
DIN EN ISO 9173-1 : 2015	DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016)
BS EN 10297-1 : 2003	SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
DIN EN ISO 3506-3 E : 2010	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS
BS EN ISO 6508-2 : 2015	METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS
EN 1097-2 : 2010	TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
BS EN 10208-1 : 2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
BS EN 10088-2 : 2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 12504-2:2012-12	TESTING CONCRETE IN STRUCTURES - PART 2: NON-DESTRUCTIVE TESTING - DETERMINATION OF REBOUND NUMBER
ISO 13628-10 : 2005(R2014)	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE
BS EN ISO 13680 : 2010	PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
BS EN ISO 10432 : 2004	PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
ISO 13680 : 2010(R2016)	PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
ISO 19715 : 2017	DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE
ISO 12679 : 2011(R2016)	THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
BS EN ISO 13628-10 : 2006	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE
I.S. EN 1097-2:2010	TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
BS EN ISO 15156-2 : 2015	PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
BS EN 12513 : 2011	FOUNDING - ABRASION RESISTANT CAST IRONS
UNE EN ISO 3506-2 : 2010	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
ISO 17078-4 : 2010(R2016)	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
BS EN 957-1 : 2005	STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
UNE EN 62271-202 : 2015	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
BS EN 10208-2 : 2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
BS EN ISO 642 : 1999	STEEL HARDENABILITY TEST BY END QUENCHING (JOMINY TEST)
BS EN ISO 14923 : 2003	THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS
UNE-EN 1426:2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION
BS EN ISO 898-1 : 2013	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
ISO 16635-1 : 2013(R2018)	DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH
BS EN 14059 : 2002	DECORATIVE OIL LAMPS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN ISO 17078-2 : 2007	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
BS EN 657 : 2005	THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION
EN ISO 898-2 : 2012 COR 2012	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012)
BS EN ISO 3506-2 : 2009	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
ISO 11960 : 2014	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
UNE-EN ISO 6508-3:2015	METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6508-3:2015)
ISO 18265 : 2013	METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES
DIN EN ISO 3506-1 E : 2010	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
BS EN 12080 : 2017	RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
UNE-EN ISO 6508-2:2015	METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015)
BS EN 4359 : 2006	AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS - TECHNICAL SPECIFICATION
BS EN 14399-1 : 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
BS EN ISO 7153-1 : 2016	SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS (ISO 7153-1:2016)
BS EN ISO 11960 : 2014	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
BS EN 10205 : 2016	COLD REDUCED TINMILL PRODUCTS - BLACKPLATE
UNE EN 12513 : 2011	FOUNDING - ABRASION RESISTANT CAST IRONS
DIN EN 14399-1 E : 2015	HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
BS EN ISO 3506-3 : 2009	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS
ISO 3506-2 : 2009(R2015)	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
BS EN 14616 : 2004	THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING
BS EN 893 : 2010	MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 14566 : 2008	MECHANICAL FASTENERS FOR GYPSUM PLASTERBOARD SYSTEMS - DEFINITIONS, REQUIREMENTS AND TEST METHODS
BS EN 14772 : 2005	FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560
BS EN ISO 6508-3 : 2015	METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS
BS EN 843-4 : 2005	ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS
BS EN ISO 13533 : 2002	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT
BS EN ISO 18265 : 2013	METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013)
BS EN ISO 13625 : 2002	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - MARINE DRILLING RISER COUPLINGS
BS EN 62271-202 : 2014	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH VOLTAGE/LOW VOLTAGE PREFABRICATED SUBSTATION
BS EN ISO 898-5 : 2012	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012)
ISO 17937 : 2015	DENTISTRY - OSTEOTOME
BS EN 10084 : 2008-06	CASE HARDENING STEELS - TECHNICAL DELIVERY CONDITIONS
ISO 15156-3 : 2015	PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS
DIN EN ISO 898-1 E : 2013	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013)
ISO 7331 : 2011(R2017)	SKI-POLES FOR ALPINE SKIING - REQUIREMENTS AND TEST METHODS
ISO 12690 : 2010(R2016)	METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES
ISO 7153-1 : 2016	SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS
ISO 3266:2010(R2015)	FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES
UNE EN ISO 7153-1 : 2017	SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS (ISO 7153-1:2016)
BS EN ISO 4498 : 2010	SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS
EN ISO 3506-1 : 2009	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
ISO 16070 : 2005(R2015)	PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES
I.S. EN ISO 3506-2:2009	MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS
BS EN 10083-2 : 2006	STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
BS EN ISO 15136-2 : 2006	PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE-DRIVE SYSTEMS
ISO 898-1 : 2013(R2018)	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD
ISO 17078-2 : 2007(R2017)	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
ONORM EN ISO 9809-2 : 2010	GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA
BS EN 10218-1 : 2012	STEEL WIRE AND WIRE PRODUCTS - GENERAL - PART 1: TEST METHODS
ISO 14917 : 2017	THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION
ISO 16635-2 : 2014	DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS
BS EN ISO 16070 : 2005	PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES
UNI EN 1097-2 : 2010	TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION
UNE EN 893 : 2011	MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS
ISO 15136-2 : 2006(R2017)	PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE-DRIVE SYSTEMS
BS EN 892 : 2012	MOUNTAINEERING EQUIPMENT - DYNAMIC MOUNTAINEERING ROPES - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 10083-1 : 2006	STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
ISO 898-5 : 2012(R2017)	MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND