ISO 669:2016
Current
Current
The latest, up-to-date edition.
Resistance welding Resistance welding equipment Mechanical and electrical requirements
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
02-12-2016
ISO 669:2016 defines and specifies certain identified electrical and mechanical characteristics of equipment used for
- resistance spot welding,
- projection welding,
- resistance seam welding,
- upset welding[1], and
? flash welding[2].
ISO 669:2016 specifies the information to be given in equipment specifications and the test methods to be used for measuring those characteristics.
Not all requirements apply to all types of equipment.
The following types of power sources are included:
- single phase with alternating welding current;
- single phase with rectified welding current by rectification of the output of the welding transformer;
- single phase with inverter welding transformer;
- three phase with rectified welding current by rectification of the output of the welding transformer;
- three phase with a current rectification in the input of the welding transformer (sometimes called frequency convertor);
- three phase with inverter welding transformers.
ISO 669:2016 Standard does not apply to welding transformers that are separate from the equipment.
NOTE Safety requirements for resistance welding equipment are covered by IEC 62135?1.
[1] Often referred to by the non-preferred term, butt welding.
[2] Often referred to by the non-preferred term, flash butt welding.
| DevelopmentNote |
Supersedes ISO/DIS 669. (02/2016)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 669 E : 2016 | Identical |
| NF EN ISO 669 : 2016 | Identical |
| NBN EN ISO 669 : 2016 | Identical |
| NEN EN ISO 669 : 2016 | Identical |
| NS EN ISO 669 : 2016 | Identical |
| I.S. EN ISO 669:2016 | Identical |
| PN EN ISO 669 : 2016 | Identical |
| SN EN ISO 669:2016 | Identical |
| UNI EN ISO 669 : 2016 | Identical |
| SS-EN ISO 669:2016 | Identical |
| UNE-EN ISO 669:2017 | Identical |
| BS EN ISO 669:2016 | Identical |
| EN ISO 669:2016 | Identical |
| DIN EN ISO 669:2016-07 | Identical |
| NBN F 43 001 : 1986 | Identical |
| DIN ISO 669:2001-06 | Identical |
| BS 3065:1982 | Identical |
| NEN ISO 669 : 2000 | Identical |
| NFA 82 020 : 1985 | Similar to |
| PREN ISO 5826 : DRAFT 2012 | RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS (ISO/DIS 5826:2012) |
| BS EN 50240:2004 | Electromagnetic compatibilty (EMC). Product standard for resistance welding equipment |
| DIN ISO 17657-3:2006-02 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 3: CURRENT SENSING COIL |
| DIN ISO 17657-5:2006-02 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 5: VERIFICATION OF WELDING CURRENT MEASURING SYSTEM |
| DIN ISO 17657-2:2006-02 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 2: WELDING CURRENT METER WITH CURRENT SENSING COIL |
| BS ISO 17657-2 : 2005 AMD 17296 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 2: WELDING CURRENT METER WITH CURRENT SENSING COIL |
| BS EN ISO 22829:2017 | Resistance welding equipment. Transformers. Integrated transformer-rectifier units for welding guns operating at 1 000 Hz |
| CEI EN 50505 : 2010 | BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM EQUIPMENT FOR RESISTANCE WELDING AND ALLIED PROCESSES |
| BS ISO 16432 : 2006 AMD 17294 | RESISTANCE WELDING - PROCEDURE FOR PROJECTION WELDING OF UNCOATED AND COATED LOW CARBON STEELS USING EMBOSSED PROJECTION(S) |
| 01/713049 DC : DRAFT SEP 2001 | PREN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES |
| 02/705022 DC : DRAFT APR 2002 | PREN ISO 18278-2 - RESISTANCE WELDING - WELDABILITY - PART 2: ALTERNATIVE PROCEDURES FOR THE ASSESSMENT OF STEEL SHEETS FOR SPOT WELDING |
| UNE-IEC 60050-851:2010 | International Electrotechnical Vocabulary (IEV) - Part 851: Electric welding |
| DIN EN ISO 18278-1:2015-08 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| BS EN ISO 18278-2:2016 | Resistance welding. Weldability Evaluation procedures for weldability in spot welding |
| 12/30268015 DC : 0 | BS EN 62135-1 - RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION |
| ISO 14554-1:2013 | Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements |
| BS EN ISO 14324:2003 | Resistance spot welding. Destructive tests of welds. Method for the fatigue testing of spot welded joints |
| BS EN ISO 17657-3:2007 | Resistance welding. Welding current measurement for resistance welding Current sensing coil |
| BS EN ISO 17657-2:2007 | Resistance welding. Welding current measurement for resistance welding Welding current meter with current sensing coil |
| ISO 17657-3:2005 | Resistance welding Welding current measurement for resistance welding Part 3: Current sensing coil |
| ISO 17657-1:2005 | Resistance welding Welding current measurement for resistance welding Part 1: Guidelines for measurement |
| I.S. EN ISO 14373:2015 | RESISTANCE WELDING - PROCEDURE FOR SPOT WELDING OF UNCOATED AND COATED LOW CARBON STEELS (ISO 14373:2015) |
| ONORM EN ISO 15614-12 : 2014 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 12: SPOT, SEAM AND PROJECTION WELDING (ISO 15614-12:2014) |
| EN ISO 15614-12:2014 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2014) |
| CEI EN 62135-1 : 2016 | RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION |
| NF EN ISO 14327 : 2004 | RESISTANCE WELDING - PROCEDURES FOR DETERMINING THE WELDABILITY LOBE FOR RESISTANCE SPOT, PROJECTION AND SEAM WELDING |
| 13/30284265 DC : 0 | BS EN ISO 18278-1 - RESISTANCE WELDING - WELDABILITY - PART 1: ASSESSMENT OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS |
| 15/30318290 DC : 0 | BS EN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES |
| BS ISO 17657-3 : 2005 AMD 17297 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - CURRENT SENSING COIL |
| BS EN 62135-2:2015 | Resistance welding equipment Electromagnetic compatibility (EMC) requirements |
| 02/705025 DC : DRAFT APR 2002 | ISO/DIS 17657-3 - RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 3: CURRENT SENSING COIL |
| 16/30339325 DC : 0 | BS EN ISO 18278-3 - RESISTANCE WELDING - WELDABILITY - PART 3: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELD BONDING |
| 00/714723 DC : DRAFT OCT 2000 | ISO/DIS 14373 - WELDING - RESISTANCE SPOT WELDS - PROCEDURE FOR SPOT WELDING OF UNCOATED AND COATED LOW CARBON AND HIGH STRENGTH STEELS |
| 02/705023 DC : DRAFT APR 2002 | ISO 17657-1 - RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 1: GUIDELINE FOR MEASUREMENT |
| BS ISO 17657-5 : 2005 AMD 17298 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 5: VERIFICATION OF WELDING CURRENT MEASURING SYSTEM |
| EN ISO 18278-3:2017 | Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding (ISO 18278-3:2017) |
| I.S. EN 62135-2:2015 | RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| I.S. EN 50505:2008 | BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM EQUIPMENT FOR RESISTANCE WELDING AND ALLIED PROCESSES |
| DIN EN ISO 15614-12:2014-10 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2014); German version EN ISO 15614-12:2014 |
| DIN EN ISO 17657-4:2007-09 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 4: CALIBRATION SYSTEM |
| DIN EN ISO 17657-2 E : 2007 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 2: WELDING CURRENT METER WITH CURRENT SENSING COIL |
| DIN EN ISO 17657-5 E : 2007 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 5: VERIFICATION OF WELDING CURRENT MEASURING SYSTEM |
| DIN EN ISO 17657-2:2007-09 | Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with current sensing coil (ISO 17657-2:2005) |
| DIN EN ISO 17657-3:2007-09 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 3: CURRENT SENSING COIL |
| DIN EN ISO 17657-5:2007-09 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 5: VERIFICATION OF WELDING CURRENT MEASURING SYSTEM |
| UNE-EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| I.S. EN ISO 15609-5:2011 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 5: RESISTANCE WELDING (ISO 15609-5:2011) |
| I.S. EN ISO 15614-12:2014 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 12: SPOT, SEAM AND PROJECTION WELDING (ISO 15614-12:2014) |
| I.S. EN ISO 18278-2:2016 | RESISTANCE WELDING - WELDABILITY - PART 2: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELDING (ISO 18278-2:2016) |
| I.S. EN ISO 7284:1997 | RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH TWO SEPARATE SECONDARY WINDINGS FOR MULTI-SPOT WELDING AS USED IN THE AUTOMOBILE INDUSTRY |
| I.S. EN ISO 18595:2007 | RESISTANCE WELDING - SPOT WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - WELDABILITY, WELDING AND TESTING |
| EN ISO 18595:2007 | Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing (ISO 18595:2007) |
| I.S. EN ISO 17662:2016 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| I.S. EN ISO 14554-1:2013 | QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 1: COMPREHENSIVE QUALITY REQUIREMENTS (ISO 14554-1:2013) |
| I.S. EN ISO 18278-1:2015 | RESISTANCE WELDING - WELDABILITY - PART 1: GENERAL REQUIREMENTS FOR THE EVALUATION OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS (ISO 18278-1:2015) |
| ONORM EN ISO 18278-1 : JUL 2015 | RESISTANCE WELDING - WELDABILITY - PART 1: GENERAL REQUIREMENTS FOR THE EVALUATION OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS (ISO 18278-1:2015) |
| OVE/ONORM EN 62135-2 : 2015 | RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 62135-2:2015) |
| 14/30284268 DC : 0 | BS EN ISO 18278-2 - RESISTANCE WELDING - WELDABILITY - PART 2: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELDING |
| 14/30289473 DC : 0 | BS EN ISO 15614-12 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 12: SPOT, SEAM AND PROJECTION WELDING |
| ISO 22829:2017 | Resistance welding equipment — Transformers — Integrated transformer-rectifier units for welding guns operating at 1 000 Hz |
| PREN ISO 18278-1 : DRAFT 2002 | RESISTANCE WELDING - WELDABILITY - PART 1: ASSESSMENT OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS |
| BS ISO 17657-1 : 2005 AMD 17295 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 1: GUIDELINES FOR MEASUREMENT |
| UNE-EN ISO 18278-3:2018 | Resistance welding - Weldability - Part 3: Evaluation procedures for weldability in spot weld bonding (ISO 18278-3:2017) |
| NF EN 50240 : 2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT STANDARD FOR RESISTANCE WELDING EQUIPMENT |
| DIN EN ISO 15609-5:2012-03 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011) |
| DIN EN ISO 14554-1:2014-05 | Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013) |
| DIN EN ISO 17662:2016-09 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| DIN EN ISO 17657-3 E : 2007 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 3: CURRENT SENSING COIL |
| DIN EN ISO 17657-4 E : 2007 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 4: CALIBRATION SYSTEM |
| DIN EN ISO 14373:2015-06 | Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2015) |
| DIN EN ISO 14327:2004-06 | Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding (ISO 14327:2004) |
| DIN EN ISO 14324:2003-12 | RESISTANCE SPOT WELDING - DESTRUCTIVE TESTS OF WELDS - METHOD FOR THE FATIGUE TESTING OF SPOT WELDED JOINTS |
| BS EN ISO 17657-5:2007 | Resistance welding. Welding current measurement for resistance welding Verification of welding current measuring system |
| BS EN ISO 15614-12:2014 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Spot, seam and projection welding |
| UNE-EN ISO 18278-1:2015 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| IEC 62135-1:2015 | Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation |
| EN ISO 17657-3:2007 | Resistance welding - Welding current measurement for resistance welding - Part 3: Current sensing coil (ISO 17657-3:2005) |
| EN ISO 16432:2007 | Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006) |
| EN ISO 17657-1:2007 | Resistance welding - Welding current measurement for resistance welding - Part 1: Guidelines for measurement (ISO 17657-1:2005) |
| UNI EN ISO 14554-1 : 2014 | QUALITY REQUIREMENTS FOR WELDING - RESISTANCE WELDING OF METALLIC MATERIALS - PART 1: COMPREHENSIVE QUALITY REQUIREMENTS |
| EN ISO 17657-2:2007 | Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with current sensing coil (ISO 17657-2:2005) |
| UNI EN ISO 15609-5 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 5: RESISTANCE WELDING |
| UNI EN ISO 5826 : 2014 | RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS |
| BS EN ISO 18278-3:2017 | Resistance welding. Weldability Evaluation procedures for weldability in spot weld bonding |
| 12/30246951 DC : 0 | BS ISO 5826 - RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS |
| 02/705021 DC : DRAFT APR 2002 | PREN ISO 18278-1 - RESISTANCE WELDING - WELDABILITY - PART 1: ASSESSMENT OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS |
| 06/30131171 DC : DRAFT MAR 2006 | ISO 18595 - RESISTANCE WELDING - SPOT WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - WELDABILITY, WELDING AND TESTING |
| 02/705024 DC : DRAFT APR 2002 | ISO/DIS 17657-2 - RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 2: WELDING CURRENT METER WITH SENSING COIL |
| BS ISO 16433 : 2006 AMD 17291 | RESISTANCE WELDING - PROCEDURE FOR SEAM WELDING OF UNCOATED AND COATED LOW CARBON STEELS |
| DIN ISO 17657-4:2006-02 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 4: CALIBRATION SYSTEM |
| I.S. EN 62135-1:2015 | RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION |
| IEC 60050-851:2008 | International Electrotechnical Vocabulary (IEV) - Part 851: Electric welding |
| DIN EN ISO 16432:2007-09 | Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006) |
| DIN EN ISO 16433:2007-09 | Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006) |
| DIN EN ISO 5826:2014-07 | RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - GENERAL SPECIFICATIONS APPLICABLE TO ALL TRANSFORMERS (ISO 5826:2014) |
| DIN EN ISO 17657-1 E : 2007 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 1: GUIDELINES FOR MEASUREMENT |
| ISO 18595:2007 | Resistance welding Spot welding of aluminium and aluminium alloys Weldability, welding and testing |
| ISO 16432:2006 | Resistance welding Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) |
| BS EN ISO 8166:2003 | Resistance welding. Procedure for the evaluation of the life of spot welding electrodes using constant machine settings |
| BS EN ISO 16432:2007 | Resistance welding. Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) |
| ISO 18278-2:2016 | Resistance welding Weldability Part 2: Evaluation procedures for weldability in spot welding |
| BS EN ISO 17657-1:2007 | Resistance welding. Welding current measurement for resistance welding Guidelines for measurement |
| BS EN ISO 14327:2004 | Resistance welding. Procedures for determining the weldability lobe for resistance spot, projection and seam welding |
| UNE-EN ISO 18278-2:2016 | Resistance welding - Weldability - Part 2: Evaluation procedures for weldability in spot welding (ISO 18278-2:2016) |
| BS EN ISO 17657-4:2007 | Resistance welding. Welding current measurement for resistance welding Calibration system |
| ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
| DIN EN ISO 17657-1:2007-09 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 1: GUIDELINES FOR MEASUREMENT |
| BS EN ISO 7284:1996 | Resistance welding equipment. Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry |
| ISO 15614-12:2014 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 12: Spot, seam and projection welding |
| ISO 14373:2015 | Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels |
| ISO 18278-1:2015 | Resistance welding Weldability Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials |
| ISO 14327:2004 | Resistance welding Procedures for determining the weldability lobe for resistance spot, projection and seam welding |
| ISO 16433:2006 | Resistance welding Procedure for seam welding of uncoated and coated low carbon steels |
| ISO 17657-2:2005 | Resistance welding Welding current measurement for resistance welding Part 2: Welding current meter with current sensing coil |
| ISO 17657-4:2005 | Resistance welding Welding current measurement for resistance welding Part 4: Calibration system |
| BS EN ISO 18278-1:2015 | Resistance welding. Weldability General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials |
| BS EN ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification Resistance welding |
| ISO 17657-5:2005 | Resistance welding Welding current measurement for resistance welding Part 5: Verification of welding current measuring system |
| BS EN ISO 14554-1:2013 | Quality requirements for welding. Resistance welding of metallic materials Comprehensive quality requirements |
| IEC 62135-2:2015 | Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements |
| ISO 14324:2003 | Resistance spot welding Destructive tests of welds Method for the fatigue testing of spot welded joints |
| UNE-EN ISO 15614-12:2015 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2014) |
| ISO 7284:1993 | Resistance welding equipment Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry |
| ISO 5826:2014 | Resistance welding equipment Transformers General specifications applicable to all transformers |
| EN ISO 8166:2003 | Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings (ISO 8166:2003) |
| EN ISO 18278-2:2016 | Resistance welding - Weldability - Part 2: Evaluation procedures for weldability in spot welding (ISO 18278-2:2016) |
| EN ISO 5826:2014 | Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014) |
| EN ISO 17657-5:2007 | Resistance welding - Welding current measurement for resistance welding - Part 5: Verification of welding current measuring system (ISO 17657-5:2005) |
| EN ISO 18278-1:2015 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| EN ISO 17657-4:2007 | Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system (ISO 17657-4:2005) |
| EN ISO 14554-1:2013 | Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013) |
| EN ISO 14327:2004 | Resistance welding - Procedures for determining the weldability lobe for resistance spot, projection and seam welding (ISO 14327:2004) |
| EN ISO 14324:2003 | Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO 14324:2003) |
| EN ISO 14373:2015 | Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2015) |
| EN ISO 7284 : 1996 | RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH TWO SEPARATE SECONDARY WINDINGS FOR MULTI-SPOT WELDING AS USED IN THE AUTOMOBILE INDUSTRY |
| EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| EN ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011, Corrected version 2011-12-01) |
| EN ISO 16433:2007 | Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006) |
| DIN ISO 17657-1:2006-02 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 1: GUIDELINES FOR MEASUREMENT |
| I.S. EN ISO 18278-3:2017 | RESISTANCE WELDING - WELDABILITY - PART 3: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELD BONDING (ISO 18278-3:2017) |
| DIN ISO 12166 E : 2006 | RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH ONE SECONDARY WINDING FOR MULTISPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY |
| 03/111744 DC : DRAFT JULY 2003 | |
| BS EN 50505:2008 | Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for resistance welding and allied processes |
| BS 5924:1980 | Specification for safety requirements for electrical equipment of machines for resistance welding and allied processes |
| 14/30269850 DC : 0 | BS EN 62135-2 - ED 2.0 - RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| 03/117433 DC : DRAFT DEC 2003 | BS EN ISO 14323 - RESISTANCE SPOT WELDING AND PROJECTION WELDS - DESTRUCTIVE TESTING OF WELDS - SPECIMEN DIMENSIONS AND PROCEDURE FOR IMPACT SHEAR TEST AND CROSS TENSION TESTING |
| 13/30266458 DC : 0 | BS EN ISO 14373 - RESISTANCE WELDING - PROCEDURE FOR SPOT WELDING OF UNCOATED AND COATED LOW CARBON STEELS |
| 10/30208622 DC : DRAFT JUNE 2010 | BS ISO 15609-5 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 5: RESISTANCE WELDING |
| 02/705027 DC : DRAFT APR 2002 | ISO/DIS 17657-5 - RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 5: VERIFICATION OF WELDING CURRENT MEASURING SYSTEM |
| 02/705026 DC : DRAFT APR 2002 | ISO/DIS 17657-4 - RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 4: CALIBRATION SYSTEM |
| BS ISO 17657-4 : 2005 AMD 17299 | RESISTANCE WELDING - WELDING CURRENT MEASUREMENT FOR RESISTANCE WELDING - PART 4: CALIBRATION SYSTEM |
| I.S. EN ISO 22829:2017 | RESISTANCE WELDING EQUIPMENT - TRANSFORMERS - INTEGRATED TRANSFORMER-RECTIFIER UNITS FOR WELDING GUNS OPERATING AT 1000 HZ (ISO 22829:2017) |
| ISO 18278-3:2017 | Resistance welding — Weldability — Part 3: Evaluation procedures for weldability in spot weld bonding |
| EN ISO 22829:2017 | Resistance welding equipment - Transformers - Integrated transformer-rectifier units for welding guns operating at 1 000 Hz (ISO 22829:2017) |
| I.S. EN 50240:2006 | |
| DIN EN ISO 18278-2:2016-09 | RESISTANCE WELDING - WELDABILITY - PART 2: EVALUATION PROCEDURES FOR WELDABILITY IN SPOT WELDING (ISO 18278-2:2016) |
| DIN EN ISO 18595:2007-12 | Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing (ISO 18595:2007); German version EN ISO 18595:2007 |
| ISO 17662:2016 | Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities |
| BS EN ISO 18595:2007 | Resistance welding. Spot welding of aluminium and aluminium alloys. Weldability, welding and testing |
| BS EN ISO 17662:2016 | Welding. Calibration, verification and validation of equipment used for welding, including ancillary activities |
| BS EN 62135-1:2015 | Resistance welding equipment Safety requirements for design, manufacture and installation |
| BS EN ISO 16433:2007 | Resistance welding. Procedure for seam welding of uncoated and coated low carbon steels |
| UNE-EN ISO 15609-5:2012 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011, Corrected version 2011-12-01) |
| ISO 8166:2003 | Resistance welding Procedure for the evaluation of the life of spot welding electrodes using constant machine settings |
| BS EN ISO 14373:2015 | Resistance welding. Procedure for spot welding of uncoated and coated low carbon steels |
| BS EN ISO 5826:2014 | Resistance welding equipment. Transformers. General specifications applicable to all transformers |
| DIN EN ISO 8166:2003-09 | RESISTANCE WELDING - PROCEDURE FOR THE EVALUATION OF THE LIFE OF SPOT WELDING ELECTRODES USING CONSTANT MACHINE SETTINGS |
| UNI EN ISO 15614-12 : 2014 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 12: SPOT, SEAM AND PROJECTION WELDING |
| DIN ISO 12166:2006-02 | RESISTANCE WELDING EQUIPMENT - PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH ONE SECONDARY WINDING FOR MULTISPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY |
| EN 62135-2:2015 | Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements |
| EN 62135-1:2015/AC:2016-02 | RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION |
| EN 50505:2008 | Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for resistance welding and allied processes |
| EN 50240:2004/corrigendum:2005 |
| ISO 17657-5:2005 | Resistance welding Welding current measurement for resistance welding Part 5: Verification of welding current measuring system |
| ISO 17657-2:2005 | Resistance welding Welding current measurement for resistance welding Part 2: Welding current meter with current sensing coil |
| ISO 865:1981 | Slots in platens for projection welding machines |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 8430-1:2016 | Resistance spot welding Electrode holders Part 1: Taper fixing 1:10 |
| ISO 8430-2:2016 | Resistance spot welding Electrode holders Part 2: Morse taper fixing |
| IEC 62135-1:2015 | Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation |
| ISO 8430-3:2016 | Resistance spot welding Electrode holders Part 3: Parallel shank fixing for end thrust |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| ISO 5184:1979 | Straight resistance spot welding electrodes |
| ISO 5826:2014 | Resistance welding equipment Transformers General specifications applicable to all transformers |
| ISO 17677-1:2009 | Resistance welding Vocabulary Part 1: Spot, projection and seam welding |
| ISO 5821:2009 | Resistance welding — Spot welding electrode caps |
US$201.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.