ISO 720:1985
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Glass Hydrolytic resistance of glass grains at 121 degrees C Method of test and classification
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
09-14-2020
Language(s)
English, French
Published date
10-10-1985
The principle, reagents, apparatus and the procedure are specified. The resistance is expressed by the volume of acid required for titration of the alkali extracted from the unit mass of glass. The permissible range of the values obtained and the limit values in the hydrolytic resistance grain test are listed.
| DevelopmentNote |
Also numbered as BS 3473-3(1987) (07/2005)
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO 720 : 1986 | Identical |
| UNE 43707:1975 | Identical |
| DIN ISO 720:1989-12 | Identical |
| NF ISO 720 : 1986 | Identical |
| BIS IS 2303-1-2 : 2012(R2017) | Identical |
| DIN 28817:1976-05 | Similar to |
| ISO 11418-4:2005 | Containers and accessories for pharmaceutical preparations — Part 4: Tablet glass bottles |
| ISO 3585:1998 | Borosilicate glass 3.3 Properties |
| 15/30314949 DC : 0 | BS ISO 11418-2 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 2: SCREW-NECK GLASS BOTTLES FOR SYRUPS |
| 15/30314886 DC : 0 | BS ISO 11418-1 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 1: DROP-DISPENSING GLASS BOTTLES |
| 15/30315528 DC : 0 | BS ISO 4802-2 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 2: DETERMINATION BY FLAME SPECTROMETRY AND CLASSIFICATION |
| 03/106303 DC : DRAFT APR 2003 | BS ISO 11418-1 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 1: DROP-DISPENSING BOTTLES |
| 09/30178949 DC : 0 | BS ISO 4802-2 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 2: DETERMINATION BY FLAME SPECTROMETRY AND CLASSIFICATION |
| PREN ISO 13079 : DRAFT 2010 | LABORATORY GLASS AND PLASTICS WARE - TUBES AND SUPPORT FOR THE MEASUREMENT OF ERYTHROCYTIC SEDIMENTATION RATE BY THE WESTERGREN METHOD |
| BS 7709-3:1993 | Analysis of extract solutions of glass Method for determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry |
| BS ISO 4802-1:2016 | Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by titration method and classification |
| BS 7709-5:1993 | Analysis of extract solutions of glass Method for determination of iron (III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry |
| BS 7709-1:1993 | Analysis of extract solutions of glass Method for determination of silicon dioxide by molecular absorption spectrometry |
| NF EN ISO 8362-1 : 2010 AMD 1 2016 | INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING |
| BS EN ISO 9187-1:2010 | Injection equipment for medical use Ampoules for injectables |
| BS EN ISO 8362-1 : 2009 | INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING (ISO 8362-1:2009) |
| DIN ISO 11040-1:2017-07 | PREFILLED SYRINGES - PART 1: GLASS CYLINDERS FOR DENTAL LOCAL ANAESTHETIC CARTRIDGES (ISO 11040-1:2015) |
| EN ISO 8362-1:2009/A1:2015 | INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING (ISO 8362-1:2009/AMD 1:2015) |
| 03/106306 DC : DRAFT APR 2003 | BS ISO 11418-4 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 4: TABLET BOTTLES |
| DIN ISO 11040-1:1993-07 | PREFILLED SYRINGES - PART 1: GLASS CYLINDERS FOR DENTAL LOCAL ANAESTHETIC CARTRIDGES (ISO 11040-1:2015) |
| BS ISO 11418-1:2016 | Containers and accessories for pharmaceutical preparations Drop-dispensing glass bottles |
| BS ISO 4802-2:2016 | Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by flame spectrometry and classification |
| BS ISO 11040-1:2015 | Prefilled syringes Glass cylinders for dental local anaesthetic cartridges |
| DIN ISO 11040-4 E : 2017 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| ISO 11418-3:2016 | Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms |
| 15/30314850 DC : 0 | BS ISO 11418-7 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 7: SCREW-NECK VIALS MADE OF GLASS TUBING FOR LIQUID DOSAGE FORMS |
| BS 3473-1:1985 | Chemical resistance of glass used in the production of laboratory glassware Method for determination of resistance of glass to attack by a boiling aqueous solution of mixed alkali |
| BS ISO 11040-4:2015 | Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| BS 7709-6:1993 | Analysis of extract solutions of glass Method for determination of boron (III) oxide by molecular absorption spectrometry |
| ISO 11040-1:2015 | Prefilled syringes Part 1: Glass cylinders for dental local anaesthetic cartridges |
| ISO 8362-1:2009 | Injection containers and accessories Part 1: Injection vials made of glass tubing |
| I.S. EN ISO 8536-1:2011 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 1: INFUSION GLASS BOTTLES (ISO 8536-1:2011) |
| I.S. EN ISO 9187-1:2010 | INJECTION EQUIPMENT FOR MEDICAL USE - PART 1: AMPOULES FOR INJECTABLES |
| I.S. EN ISO 8362-4:2011 | INJECTION CONTAINERS AND ACCESSORIES - PART 4: INJECTION VIALS MADE OF MOULDED GLASS (ISO 8362-4:2011) |
| BS 2598-1:1991 | Glass plant, pipeline and fittings Specification for properties of borosilicate glass 3.3 |
| BS ISO 7348:1992 | Glass containers. Manufacture. Vocabulary |
| ISO 11418-1:2016 | Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles |
| 13/30273499 DC : 0 | BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| BS ISO 11418-3 : 2016 | CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 3: SCREW-NECK GLASS BOTTLES (VERAL) FOR SOLID AND LIQUID DOSAGE FORMS |
| BS ISO 11418-4:2005 | Containers and accessories for pharmaceutical preparations Tablet glass bottles |
| ISO 11418-7:2016 | Containers and accessories for pharmaceutical preparations Part 7: Screw-neck vials made of glass tubing for liquid dosage forms |
| BS 7709-4:1993 | Analysis of extract solutions of glass Method for determination of aluminium oxide by molecular absorption spectrometry |
| 10/30204619 DC : 0 | BS EN ISO 13079 - LABORATORY GLASS AND PLASTICS WARE - TUBES AND SUPPORT FOR THE MEASUREMENT OF ERYTHROCYTIC SEDIMENTATION RATE BY THE WESTERGREN METHOD |
| DIN EN ISO 8362-1:2016-06 | INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING (ISO 8362-1:2009 + AMD 1:2015) |
| ISO 11418-2:2016 | Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups |
| DIN EN 1595:1997-05 | PRESSURE EQUIPMENT MADE FROM BOROSILICATE GLASS 3.3 - GENERAL RULES FOR DESIGN, MANUFACTURE AND TESTING |
| UNE-EN ISO 8362-4:2012 | Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011) |
| ISO 9187-1:2010 | Injection equipment for medical use Part 1: Ampoules for injectables |
| UNI EN ISO 9187-1 : 2010 | INJECTION EQUIPMENT FOR MEDICAL USE - PART 1: AMPOULES FOR INJECTABLES |
| UNI EN ISO 8536-1 : 2011 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 1: INFUSION GLASS BOTTLES |
| UNI EN ISO 8362-4 : 2011 | INJECTION CONTAINERS AND ACCESSORIES - PART 4: INJECTION VIALS MADE OF MOULDED GLASS |
| BS ISO 11418-7:2016 | Containers and accessories for pharmaceutical preparations Screw-neck vials made of glass tubing for liquid dosage forms |
| DIN ISO 11040-1 E : 2017 | PREFILLED SYRINGES - PART 1: GLASS CYLINDERS FOR DENTAL LOCAL ANAESTHETIC CARTRIDGES (ISO 11040-1:2015) |
| 03/106305 DC : DRAFT APR 2003 | BS ISO 11418-3 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 3: SCREW-NECK BOTTLES (VERAL) FOR SOLID AND LIQUID DOSAGE FORMS |
| ISO 4802-1:2016 | Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification |
| BS 7709-2:1993 | Analysis of extract solutions of glass Method for determination of sodium oxide and potassium oxide by flame spectrometric methods |
| BS ISO 3585:1998 | Borosilicate glass 3.3. Properties |
| ISO 12775:1997 | Guidelines on types of glass of normal bulk-production composition and their test methods |
| ISO 4802-2:2016 | Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification |
| DIN EN ISO 9187-1:2011-01 | Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010) |
| ISO 719:1985 | Glass Hydrolytic resistance of glass grains at 98 degrees C Method of test and classification |
| ISO 11040-4:2015 | Prefilled syringes Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| DIN EN ISO 8536-1:2011-12 | Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011) |
| DIN EN ISO 8362-4:2011-12 | Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011) |
| UNE-EN ISO 9187-1:2011 | Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010) |
| BS EN 28362-4:1993 | Injection containers for injectables and accessories Injection vials made of moulded glass |
| UNE-EN ISO 8536-1:2012 | Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011) |
| BS EN ISO 8536-1:2011 | Infusion equipment for medical use Infusion glass bottles |
| BS EN ISO 8362-4:2011 | Injection containers and accessories Injection vials made of moulded glass |
| ISO 8362-4:2011 | Injection containers and accessories Part 4: Injection vials made of moulded glass |
| ISO 8536-1:2011 | Infusion equipment for medical use Part 1: Infusion glass bottles |
| EN ISO 8362-4:2011 | Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011) |
| EN ISO 9187-1:2010 | Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010) |
| EN 1595:1997 | Pressure equipment made from borosilicate glass 3.3 - General rules for design, manufacture and testing |
| EN ISO 8536-1:2011 | Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011) |
| 14/30310712 DC : 0 | BS ISO 11040-1 - PREFILLED SYRINGES - PART 1: GLASS CYLINDERS FOR DENTAL LOCAL ANAESTHETIC CARTRIDGES |
| 03/106304 DC : DRAFT APR 2003 | BS ISO 11418-2 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 2: SCREW-NECK BOTTLES FOR SYRUPS |
| BS ISO 11418-5:2015 | Containers and accessories for pharmaceutical preparations Dropper assemblies |
| 15/30315525 DC : 0 | BS ISO 4802-1 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
| 15/30314952 DC : 0 | BS ISO 11418-3 - CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 3: SCREW-NECK GLASS BOTTLES (VERAL) FOR SOLID AND LIQUID DOSAGE FORMS |
| 10/30219700 DC : 0 | BS ISO 13079 - LABORATORY GLASS AND PLASTICS WARE - TUBES AND SUPPORT FOR THE MEASUREMENT OF ERYTHROCYTIC SEDIMENTATION RATE BY THE WESTERGREN METHOD |
| BS ISO 12775:1997 | Guidelines on types of glass of normal bulk-production composition and their test methods |
| ISO 7348:1992 | Glass containers Manufacture Vocabulary |
| DIN ISO 11040-4:2007-10 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| 09/30178946 DC : 0 | BS ISO 4802-1 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
| ISO 11418-5:2015 | Containers and accessories for pharmaceutical preparations Part 5: Dropper assemblies |
| BS ISO 11418-2 : 2016 | CONTAINERS AND ACCESSORIES FOR PHARMACEUTICAL PREPARATIONS - PART 2: SCREW-NECK GLASS BOTTLES FOR SYRUPS |
| ISO 13926-1:2004 | Pen systems Part 1: Glass cylinders for pen-injectors for medical use |
| I.S. EN ISO 8362-1:2009 | INJECTION CONTAINERS AND ACCESSORIES - PART 1: INJECTION VIALS MADE OF GLASS TUBING (ISO 8362-1:2009) |
| DIN ISO 11040-4:2017-07 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| UNE-EN ISO 8362-1:2010 | Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2009) |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.