ISO 7391-2 : 2006

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Preview

PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES

Publisher: International Organization for Standardization

Published: 01-01-2006

Available Formats: PDF - French, Hardcopy - French, PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Conformance
3 Normative references
4 Preparation of test specimens
  4.1 General
  4.2 Treatment of the material before moulding
  4.3 Injection moulding
  4.4 Compression moulding
5 Conditioning of test specimens
6 Determination of properties

Abstract - (Show below) - (Hide below)

States the methods of preparation of test specimens and the test methods to be used in determining the properties of polycarbonate moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given here.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Withdrawn
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 61
Supersedes	ISO/DIS 7391-2 : 60.00 (2006)
Superseded By	ISO 21305-2 : 2019

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NEN EN ISO 7391-2 : 2006	Identical
PN EN ISO 7391-2 : 2006	Identical
I.S. EN ISO 7391-2:2006	Identical
BS EN ISO 7391-2 : 2006	Identical
EN ISO 7391-2 : 2006	Identical
ONORM EN ISO 7391-2 : 2006	Identical
NBN EN ISO 7391-2 : 2006	Identical
DIN EN ISO 7391-2 : 2006	Identical
DIN EN ISO 7391-2 E : 2006	Identical
NF EN ISO 7391-2 : 2006	Identical
DS EN ISO 7391-2 : 2006	Identical
DS EN ISO 7391-2 : 2006	Identical
BS ISO 7391-2 : 1996 AMD 10746	Identical
UNE-EN ISO 7391-2:2006	Identical
PN EN ISO 7391-2 : 2006	Identical
ONORM EN ISO 7391-2 : 2006	Identical
EN ISO 7391-2 : 2006	Identical
BS EN ISO 7391-2 : 2006	Identical
DIN EN ISO 7391-2 : 2006-06	Identical
DIN 7744-2 E : 1989	Similar to
DIN EN ISO 7391-2 E : 2006	Identical
NEN ISO 7391-2 : 1997	Identical
DIN 7744-2 : 1989	Similar to
I.S. EN ISO 7391-2:2006	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

ISO 1628-4 : 1999(R2018)	PLASTICS - DETERMINATION OF VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS
BS EN ISO 1133-2 : 2011	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011)
ONORM EN ISO 7391-1 : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
09/30183439 DC : 0	BS EN ISO 1133-2 - PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE
BS 2782-7.732D(1999) : 1999	METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF THE VISCOSITY OF POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS
03/118817 DC : DRAFT DEC 2003	BS EN ISO 7391-1 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATION
I.S. EN ISO 1133-2:2011	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011)
UNE EN ISO 1133-2 : 2012	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011)
BS 2782-7.732D(1991) : 1991	METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF VISCOSITY NUMBER OF POLYCARBONATE MOULDING AND EXTRUSION MATERIALS
BS ISO 7391-1 : 1996 AMD 10745	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
DIN EN ISO 1133-2 : 2012	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011)
DIN EN ISO 1133-2 E : 2012	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE (ISO 1133-2:2011)
UNI EN ISO 1133-2 : 2012	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE
I.S. EN ISO 7391-1:2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
UNE ISO 1628-4 : 2013	PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 4: POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS
ASTM D 3935 : 2015 : REDLINE	Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
SAE J 2642 : 2017	RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS
EN ISO 7391-1 : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
ISO 7391-1 : 2006(R2015)	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
DIN EN ISO 7391-1 E : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
DIN EN ISO 7391-1 : 2006-06	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
BS EN ISO 7391-1 : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
ISO 1133-2 : 2011(R2016)	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 2: METHOD FOR MATERIALS SENSITIVE TO TIME-TEMPERATURE HISTORY AND/OR MOISTURE
BS EN ISO 1133 : 2005	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
ISO 1133 : 2005	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60243-1 : 3.0	ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES
IEC 60112 : 4.1	METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
ISO 293 : 2004(R2016)	PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS
ISO 3167 : 2014	PLASTICS - MULTIPURPOSE TEST SPECIMENS
IEC 60250 : 1.0	RECOMMENDED METHODS FOR THE DETERMINATION OF THE PERMITTIVITY AND DIELECTRIC DISSIPATION FACTOR OF ELECTRICAL INSULATING MATERIALS AT POWER, AUDIO AND RADIO FREQUENCIES INCLUDING METRE WAVELENGTHS
ISO 10350-1 : 2017	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
ISO 11359-2 : 1999(R2015)	PLASTICS - THERMOMECHANICAL ANALYSIS (TMA) - PART 2 - DETERMINATION OF COEFFICIENT OF LINEAR THERMAL EXPANSION AND GLASS TRANSITION TEMPERATURE
ISO 75-2 : 2013(R2018)	PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE
ISO 527-2 : 2012(R2017)	PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS
ISO 11357-2 : 2013	PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 2: DETERMINATION OF GLASS TRANSITION TEMPERATURE AND GLASS TRANSITION STEP HEIGHT
IEC 60296 : 4.0EN+(REDLINE+VERSION)	FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR
IEC 60093 : 2.0	METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
ISO 180 : 2000(R2011)	PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH
IEC 60695-11-10 : 2.0	FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS
ISO 1183-1 : 2012	PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD
ISO 291 : 2008(R2016)	PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING
ISO 179-1 : 2010(R2015)	PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
ISO 62 : 2008(R2016)	PLASTICS - DETERMINATION OF WATER ABSORPTION
ISO 7391-1 : 2006(R2015)	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
ISO 306 : 2013	PLASTICS - THERMOPLASTIC MATERIALS - DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST)
ISO 294-1 : 2017	PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 1: GENERAL PRINCIPLES, AND MOULDING OF MULTIPURPOSE AND BAR TEST SPECIMENS
ISO 4589-2 : 2017	PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST
ISO 2818 : 1994(R2009)	PLASTICS - PREPARATION OF TEST SPECIMENS BY MACHINING
ISO 1628-4 : 1999(R2018)	PLASTICS - DETERMINATION OF VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS
ISO 899-1 : 2017	PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP
ISO 178 : 2010(R2015)	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES
ISO 1133 : 2005	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS

Add To Cart

Product Format

Quantity

add to cart

ISO 7391-2 : 2006

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?