ISO 7637-3:2016
Current
Current
The latest, up-to-date edition.
Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
07-01-2016
ISO 7637-3:2016 defines bench test methods to evaluate the immunity of devices under test (DUTs) to transient pulses coupled to lines other than supply lines. The test pulses simulate both fast and slow transient disturbances caused by the switching of inductive loads and relay contact bounce.
The following three test methods are described in ISO 7637-3:2016:
- capacitive coupling clamp (CCC) method;
- direct capacitive coupling (DCC) method;
- inductive coupling clamp (ICC) method.
ISO 7637-3:2016 applies to road vehicles fitted with nominal 12 V or 24 V electrical systems.
For transient pulses immunity, Annex B provides recommended test severity levels in line with the functional performance status classification (FPSC) principle described in ISO 7637‑1.
| DevelopmentNote |
Supersedes ISO/DIS 7637-3. (07/2016)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-ISO 7637-3 : 2016 | Identical |
| BS ISO 7637-3:2016 | Identical |
| NEN ISO 7637-3 : 2016 | Identical |
| DIN ISO 7637-3:1999-02 | Identical |
| PN ISO 7637-3 : 2012 | Identical |
| NF ISO 7637-3 : 1996 | Identical |
| SAE J 1850 : 2015 | CLASS B DATA COMMUNICATIONS NETWORK INTERFACE |
| BS ISO 14230-1:2012 | Road vehicles. Diagnostic communication over K-Line (DoK-Line) Physical layer |
| BS ISO 7634:2007 | Road vehicles. Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures |
| 11/30212434 DC : 0 | BS ISO 14230-1 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER K-LINE (DOK-LINE) - PART 1: PHYSICAL LAYER |
| OIML R 134-1 : 2006 | AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
| SAE J 2954 : 2017 | WIRELESS POWER TRANSFER FOR LIGHT-DUTY PLUG-IN/ELECTRIC VEHICLES AND ALIGNMENT METHODOLOGY |
| ISO 7634:2007 | Road vehicles Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures |
| OIML D 11 : 2013 | GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS |
| ISO 27145-6:2015 | Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment |
| 01/714099 DC : DRAFT OCT 2001 | ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
| BS EN 45501:2015 | Metrological aspects of non-automatic weighing instruments |
| 08/30173378 DC : DRAFT AUG 2008 | BS ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
| EN 50502:2015 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| CEN/TR 16152:2011 | Electronic fee collection - Personalisation and mounting of first mount OBE |
| DEFSTAN 23-6/3(2000) : 2000 | GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT |
| BS ISO 11898-6:2013 | Road vehicles. Controller area network (CAN) High-speed medium access unit with selective wake-up functionality |
| 10/30209944 DC : 0 | BS EN 62215-3 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD |
| PD CEN/TR 16152:2011 | Electronic fee collection. Personalisation and mounting of first mount OBE |
| BS EN 50502:2015 | Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems |
| BS ISO 11898-5:2007 | Road vehicles. Controller area network (CAN) High-speed medium access unit with low-power mode |
| 01/712457 DC : 0 | ISO/DIS 11898-1 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 1: DATA LINK LAYER AND PHYSICAL SIGNALING |
| I.S. EN 50436-1:2014 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| BS EN 50436-1:2014 | Alcohol interlocks. Test methods and performance requirements Instruments for drink-driving-offender programs |
| IEC 60839-10-1:1995 | Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars |
| OIML R 80-2 : 2017 | ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 2: METROLOGICAL CONTROLS AND TESTS |
| CEI 79-51 : 2006 | COMMUNICATION PROTOCOL FOR SECURITY INFORMATION (ALARMS) - PART 1: TRANSPORT LAYERS |
| CISPR 25:2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| 15/30283339 DC : 0 | BS ISO 11898-1 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 1: DATA LINK LAYER AND PHYSICAL SIGNALLING |
| 11/30254162 DC : 0 | BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| 13/30252783 DC : 0 | BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| 16/30320037 DC : 0 | BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVEL |
| 00/706017 DC : DRAFT MAR 2000 | BS ISO 15763 - ROAD VEHICLES - ALARM SYSTEMS FOR COMMERCIAL VEHICLES |
| BS ISO 11898-1:2015 | Road vehicles. Controller area network (CAN) Data link layer and physical signalling |
| ISO 13766-2:2018 | Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 2: Additional EMC requirements for functional safety |
| CEI 79-17 : 2002 | PROTECTION SYSTEMS FOR UNAUTHORIZED USE OF MOTOR VEHICLES - PARTICULAR REQUIREMENTS FOR THE PROTECTION SYSTEMS AGAINST THE THEFT FOR COMMERCIAL VEHICLES |
| ISO/TR 15497:2000 | Road vehicles Development guidelines for vehicle based software |
| I.S. EN 50502:2015 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS |
| ISO 11835:2002 | Road vehicles Motor vehicles with antilock braking systems (ABS) Measurement of braking performance |
| CAN/CSA-Z627-16 | Breath alcohol ignition interlock devices |
| ISO 26262-5:2011 | Road vehicles Functional safety Part 5: Product development at the hardware level |
| ISO 11898-5:2007 | Road vehicles Controller area network (CAN) Part 5: High-speed medium access unit with low-power mode |
| ISO 15763:2002 | Road vehicles — Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN 45501:2016 | Metrological aspects of non-automatic weighing instruments |
| 04/30089279 DC : DRAFT FEB 2004 | ISO 21848 - ROAD VEHICLES - ELECTRICAL AND ELECTRONIC EQUIPMENT FOR 42 V NETWORKS - ELECTRICAL LOADS |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| 12/30260709 DC : 0 | BS EN 50436-1 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| 12/30261045 DC : 0 | BS ISO 11898-6 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 6: HIGH-SPEED MEDIUM ACCESS UNIT WITH SELECTIVE WAKE-UP FUNCTIONALITY |
| OIML R 99-1 & 2 : 2008 | INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| SAE J 1113/1 : 2013 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ) |
| OIML R 21 : 2007 | TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT |
| 04/30115398 DC : DRAFT JUN 2004 | EN TS 50436 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS |
| 01/712458 DC : 0 | ISO/DIS 11898-2 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 2: HIGH-SPEED MEDIUM ACCESS UNIT |
| 06/30134700 DC : DRAFT JAN 2006 | ISO 11898-5 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 5: HIGH-SPEED MEDIUM ACCESS UNIT WITH LOW-POWER MODE |
| UNE-EN 50502:2016 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| BIS IS 12508 : 2013 | ELECTRIC TACHOMETER FOR AUTOMOTIVE VEHICLES - SPECIFICATION |
| PREN 50502 : DRAFT 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| PREN 45501 : DRAFT 2011 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| CEI EN 55025 : 2009 | VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF ON-BOARD RECEIVERS |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| IEEE 802.3-2012 | IEEE Standard for Ethernet |
| ISO/IEC/IEEE 8802-3:2017 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet |
| ISO 11898-1:2015 | Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling |
| I.S. EN 55025:2017 | VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF ON-BOARD RECEIVERS |
| DIN EN 45501:2016-03 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| 03/303498 DC : DRAFT FEB 2003 | ISO 11898-3 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 3: LOW-SPEED, FAULT-TOLERANT, MEDIUM DEPENDENT INTERFACE |
| ISO/TR 12155:1994 | Commercial vehicles Obstacle detection device during reversing Requirements and tests |
| 13/30268103 DC : 0 | BS ISO 27145-6 - ROAD VEHICLES - IMPLEMENTATION OF WORLD-WIDE HARMONIZED ON-BOARD DIAGNOSTICS (WWH-OBD) COMMUNICATION REQUIREMENTS - PART 6: EXTERNAL TEST EQUIPMENT |
| ISO/TR 7637-5:2016 | Road vehicles Electrical disturbances from conduction and coupling Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637 |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS ISO 27145-6:2015 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements External test equipment |
| BS ISO 7635:2006 | Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures |
| BS EN 55025:2017 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers |
| BS ISO 26262-5:2011 | Road vehicles. Functional safety Product development at the hardware level |
| 06/30145537 DC : 0 | EN 50436-2 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 2: INSTRUMENTS FOR GENERAL PREVENTIVE USE |
| DIN ISO 11898:1995-08 | ROAD VEHICLES - INTERCHANGE OF DIGITAL INFORMATION - CONTROLLER AREA NETWORK (CAN) FOR HIGH-SPEED COMMUNICATION |
| 07/30171041 DC : DRAFT AUG 2007 | DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
| DEFSTAN 61-5(PT6)/6(2009) : 2009 | NOMINAL 12 V AND 24 V DC ELECTRICAL SYSTEMS IN MILITARY PLATFORMS |
| OIML R 76-1 : 2006 | NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
| CEI 79-9 : 1997 | PROTECTION SYSTEMS FOR UNAUTHORIZED USE OF MOTOR VEHICLES PARTICULAR REQUIREMENTS FOR THE PROTECTION SYSTEMS AGAINST THE THEFT OF CARS |
| SAE J 1113/12 : 2017 | ELECTRICAL INTERFERENCE BY CONDUCTION AND COUPLING - CAPACITIVE AND INDUCTIVE COUPLING VIA LINES OTHER THAN SUPPLY LINES |
| UNE-ISO 14230-1:2015 | Road vehicles. Diagnostic communication over K-Line (DoK-Line). Part 1: Physical layer. |
| CEI 79-56 : 2009 | BLACK BOX TYPE SYSTEMS: FUNCTIONAL REQUIREMENTS AND TESTS |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 55025:2017/AC:2017-11 | VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF ON-BOARD RECEIVERS (CISPR 25:2016/COR1:2017) |
| ISO 14230-1:2012 | Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 1: Physical layer |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| PREN 50436-1 : DRAFT 2012 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ISO 7635:2006 | Road vehicles Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions Test procedures |
| S.R. CEN/TR 16152:2011 | ELECTRONIC FEE COLLECTION - PERSONALISATION AND MOUNTING OF FIRST MOUNT OBE |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 45501 : 2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| EN 50436-1 : 2014 COR 2016 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| OVE/ONORM EN 50436-1 : 2014 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| ISO 11452-4:2011 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
US$150.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.