ISO 7724-2:1984
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Paints and varnishes Colorimetry Part 2: Colour measurement
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
03-28-2019
Language(s)
English, French
Published date
09-01-1984
Describes the method for determining the colour co-ordinates of paint films. The method is only application to paint films that appear to be uniformly of one colour (monochromatic), when examined with normal vision. Paint films that do not completely hide a non-transparent substrate may be measured by using this procedure. All the other paint films are outside the scope. The principle consists in measurement of the spectral photometric characteristics (spectral reflectances or spectral reflectance factors) with a spectrophotometer or measurement of the tristimulus values with a tristimulus colorimeter. Calculation of the chromaticity co-ordinates by a table.
| DevelopmentNote |
Draft ISO/DIS 7724-2 is also available for this standard. (07/2001) Also numbered as BS 3900-D9(1986) (07/2005)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| Standards | Relationship |
| SANS 7724-2 : 1ED 1984(R2012) | Identical |
| NF ISO 7724-2 : 1988 | Identical |
| PN ISO 7724-2 : 2003 | Identical |
| UNE 48073-2:1994 | Identical |
| UNI 8941-2 : 1987 | Similar to |
| SANS 7724-2:1984(R2019) | Identical |
| JIS K 5600-4-5:1999 | Identical |
| DIN EN 13245-3:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| 14/30299382 DC : 0 | BS ISO 23900-4 - PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 4: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF WHITE PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| I.S. EN 4688:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| 02/122185 DC : DRAFT MAY 2002 | PREN 14469-4 - PIGMENTS AND EXTENDERS - TESTING OF COLOURING MATERIALS IN PLASTICIZED POLYVINYL CHLORIDE (PVC-P) - PART 4: DETERMINATION OF BLEEDING OF COLOURING MATERIALS |
| PD CEN/TS 16498:2013 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of tannin staining |
| 07/30173974 DC : 0 | BS EN 50304/60350 AMD1 - ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| 13/30283193 DC : 0 | BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
| 03/319410 DC : DRAFT NOV 2003 | BS EN 14836 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - METHOD OF TEST - ARTIFICIAL WEATHERING |
| DIN EN 15886 E : 2010 | CONSERVATION OF CULTURAL PROPERTY - TEST METHODS - COLOUR MEASUREMENT OF SURFACES |
| 12/30254917 DC : DRAFT JAN 2012 | BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| 12/30266874 DC | BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications |
| S.R. CEN/TS 16359:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| 05/30133330 DC : DRAFT MAY 2005 | ISO 4665 - RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO WEATHERING |
| 07/30169024 DC : 0 | BS ISO 28762 - VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION |
| DIN EN ISO 28199-1:2010-01 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009) |
| BS EN ISO 30013:2011 | Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties |
| BS ISO 11347:2012 | Ships and marine technology. Large yachts. Measurement and assessment of the visual appearance of coatings |
| 04/19987165 DC : DRAFT SEP 2004 | BS EN 13200-4 - SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT REQUIREMENTS |
| ONORM EN 4687 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| DIN EN 13245-3 E : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| 13/30291069 DC : 0 | BS EN 12608-1 - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS - PART 1: NON-COATED PVC-U PROFILES WITH LIGHT COLOURED SURFACES |
| BS EN 513:1999 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of the resistance to artificial weathering |
| BS EN 4687:2012 | Aerospace series. Paints and varnishes. Chromate free non corrosion inhibiting two components cold curing primer for military application |
| UNI EN 15836-2 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| 09/30176542 DC : 0 | BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
| EN ISO 28199-2:2009 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2009) |
| PREN 4689 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| PREN 2435-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| I.S. EN 513:1999 | UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| I.S. EN 15836-2:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| I.S. EN ISO 13468-1:1997 | PLASTICS - DETERMINATION OF TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT |
| UNI ISO 11798 : 2011 | INFORMATION AND DOCUMENTATION - PERMANENCE AND DURABILITY OF WRITING, PRINTING AND COPYING ON PAPER - REQUIREMENTS AND TEST METHODS |
| GOST R 52490 : 2005 | PAINT MATERIALS - COLORIMETRY - PART 3: CALCULATION OF COLOUR DIFFERENCES |
| UNE-EN ISO 30013:2012 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| ISO 16053:2010 | Paints and varnishes Coating materials and coating systems for exterior wood Natural weathering test |
| EN 61817:2001/A1:2004 | HOUSEHOLD PORTABLE APPLIANCES FOR COOKING, GRILLING AND SIMILAR USE - METHODS FOR MEASURING PERFORMANCE |
| BS EN 13120 : 2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN 1423:2013-03 | ROAD MARKING MATERIALS - DROP ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| DIN EN ISO 11341:2004-12 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| DIN EN ISO 11507:2007-05 | PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER |
| BS EN 2436-006:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application |
| BS EN ISO/IEC 15415 : 2005 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS |
| BS EN ISO/IEC 15416:2002 | Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Linear symbols |
| BS EN ISO 20566:2013 | Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash |
| BS EN 877 : 1999 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| ISO 28199-2:2009 | Paints and varnishes Evaluation of properties of coating systems related to the application process Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling |
| IEC 60350:1999+AMD1:2005+AMD2:2008 CSV | Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance |
| BS EN 14864:2005 | Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification |
| BS EN 1423:2012 | Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two |
| BS EN ISO 13468-1:1997 | Plastics. Determination of the total luminous transmittance of transparent materials Single-beam instrument |
| BS EN 13964:2014 | Suspended ceilings. Requirements and test methods |
| BS EN 13900-2:2003 | Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling |
| UNI EN 4689 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| EN 12877-2:1999 | Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding |
| CEN/TS 16498:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin staining |
| I.S. EN 877:2000 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| DIN EN 13900-2:2003-06 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 2: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION IN PLASTICIZED POLYVINYL CHLORIDE BY TWO-ROLL MILLING |
| EN 12877-3:1999 | Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| EN ISO 6719:2010 | Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010) |
| UNI EN 877 : 2007 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| CEN/TS 15679:2007 | Thermal Modified Timber - Definitions and characteristics |
| EN 877:1999/A1:2006/AC:2008 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN 13245-3:2010 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| EN 12373-12:2000 | Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| EN 12877-1:1999 | Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 1: General introduction |
| BS 7722:2002 | Surface covered PVC-U profiles for windows and doors. Specification |
| I.S. EN 13721:2004 | FURNITURE - ASSESSMENT OF THE SURFACE REFLECTANCE |
| I.S. EN 13200-4:2006 | SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS |
| PREN 1871 : DRAFT 2012 | ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS |
| 04/30116036 DC : DRAFT JUL 2004 | EN 1729-2 - FURNITURE - CHAIRS AND TABLES FOR EDUCATIONAL INSTITUTIONS - PART 2: SAFETY REQUIREMENTS AND TEST METHODS |
| BS 3900-D8:1986 | Methods of test for paints. Optical tests on paint films Determination of colour and colour difference: principles |
| BS 6781:1986 | Specification for continuously organic coated steel flat products |
| DIN EN ISO 28762:2011-02 | Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010) |
| 10/30235551 DC : 0 | BS EN 60350-2 - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE |
| I.S. EN 12608:2003 | UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| UNE-EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| 12/30229685 DC : 0 | BS EN ISO 13803 - PAINTS AND VARNISHES - DETERMINATION OF REFLECTION HAZE ON PAINT FILMS AT 20 DEGREES |
| UNI 8772 : 2012 | UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC- U) PROFILES FOR ROLLER BLINDS - TYPES, REQUIREMENTS AND TESTS METHODS |
| 11/30215685 DC : 0 | BS EN ISO 15110 - PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION |
| I.S. EN 13900-2:2003 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 2: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION IN PLASTICIZED POLYVINYL CHLORIDE BY TWO-ROLL MILLING |
| 12/30243830 DC : 0 | BS EN ISO 16474-1 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| BS EN 4689:2012 | Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application |
| 93/708490 DC : 0 | PREN 3840 - AEROSPACE SERIES - PAINTS AND VARNISHES TECHNICAL SPECIFICATION |
| BS 3900-F16(1997) : 1997 AMD 13289 | METHODS OF TEST FOR PAINTS - RESISTANCE TO ARTIFICIAL WEATHERING (UV RADIATION AND WATER) |
| BS EN 60350 : 2009 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| 14/30299379 DC : 0 | BS ISO 23900-3 - PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 3: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF BLACK AND COLOUR PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| 10/30209149 DC : 0 | BS EN ISO/IEC 15415 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS |
| UNI CEN/TS 16498 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF TANNIN STAINING |
| 09/30205299 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| BS 3900-D13(2000) : 2000 AMD 15244 | METHODS OF TEST FOR PAINTS - GROUP D: OPTICAL TESTS ON PAINT FILMS - PART D13: DETERMINATION OF REFLECTION HAZE ON PAINT FILMS AT 20 DEGREE C |
| 08/30181781 DC : DRAFT JULY 2008 | BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| BS EN 50304 : 2009 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| DD CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
| 01/101336 DC : DRAFT JAN 2001 | PREN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 61817:2001 | Household portable appliances for cooking, grilling and similar use. Methods for measuring performance |
| 08/30181778 DC : DRAFT JULY 2008 | BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| ONORM EN ISO 28199-1 : 2010 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
| NF EN ISO 28762 : 2011 | VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION |
| CAN/CSA-ISO/IEC 15415:13 (R2017) | Information technology - Automatic identification and data capture techniques - Bar code symbol print quality test specification - Two-dimensional symbols (Adopted ISO/IEC 15415:2011, second edition, 2011-12-15) |
| PREN 2434-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| I.S. EN 927-6:2006 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| I.S. EN 4687:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| UNI EN ISO 28199-2 : 2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 2: COLOUR STABILITY, PROCESS HIDING POWER, RE-DISSOLVING, OVERSPRAY ABSORPTION, WETTING, SURFACE TEXTURE AND MOTTLING |
| BS EN 927-6:2006 | Paints and varnishes. Coating materials and coating systems for exterior wood Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| EN 927-6:2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| I.S. EN ISO 6504-3:2007 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| BS EN ISO 6504-3:2007 | Paints and varnishes. Determination of hiding power Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
| DIN EN 877:2010-01 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008) |
| DIN EN 13200-4:2006-12 | Spectator facilities - Part 4: Seats - Product characteristics |
| DIN EN ISO 20566:2013-06 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| ISO 28199-1:2009 | Paints and varnishes Evaluation of properties of coating systems related to the application process Part 1: Relevant vocabulary and preparation of test panels |
| BS EN 12373-12:2001 | Aluminium and aluminium alloys. Anodizing Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| DIN EN 15187 E : 2006 | FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE |
| EN ISO 20566:2013 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| UNI EN 4688 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| DIN EN ISO-IEC 15416 E : 2002 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| I.S. EN 1423:2012 | ROAD MARKING MATERIALS - DROP ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| I.S. EN 13245-1:2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| DIN EN 12608:2003-09 | UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 11341:1998-02 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| I.S. EN 10245-4:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| UNI EN 4687 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| EN 4689:2012 | Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application |
| I.S. EN 13120:2009 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
| I.S. EN 13964:2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| EN 4688:2012 | Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application |
| I.S. EN ISO/IEC 15415:2005 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS |
| I.S. EN ISO 20566:2013 | PAINTS AND VARNISHES - DETERMINATION OF THE SCRATCH RESISTANCE OF A COATING SYSTEM USING A LABORATORY-SCALE CAR-WASH (ISO 20566:2013) |
| BS 2782-5:Method 552A:1999 | Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources |
| BS 3900-D11(2007) : 2007 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| BS 7412:2007 | Specification for windows and doorsets made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles |
| BS 7413:2002 | Unplasticized polyvinyl chloride (PVC-U) profiles for windows and doors. Specification |
| BS 3900-D1(1998) : 1998 AMD 13287 | METHODS OF TEST FOR PAINTS - VISUAL COMPARISON OF THE COLOUR OF PAINTS |
| NBR 14006 : 2008 | SCHOOL FURNITURE - CHAIRS AND TABLES FOR EDUCATIONAL INSTITUTIONS |
| DIN EN 15836-2:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| 07/30143084 DC : 0 | BS ISO 23911 - PLASTICS - POLY(VINYL CHLORIDE) RESINS - DETERMINATION OF DARK SPECKS BY VIBRATING-CHUTE METHOD |
| DIN EN 15836-1:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| DIN 67510-4:2008-02 | PHOSPHORESCENT PIGMENTS AND PRODUCTS - PART 4: PRODUCTS FOR PHOSPHORESCENT ESCAPE ROUTE SYSTEMS - MARKINGS AND APPLICATIONS |
| BS 3900-D10:1986 | Methods of test for paints Determination of colour and colour difference: calculation |
| 04/30113782 DC : DRAFT MAY 2004 | ISO 3865 - RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL |
| I.S. EN ISO 11507:2007 | PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER |
| BS EN ISO 28762:2010 | Vitreous and porcelain enamels. Enamel coatings applied to steel for writing surfaces. Specification |
| DIN EN 15886:2010-12 | Conservation of cultural property - Test methods - Colour measurement of surfaces |
| 09/30195864 DC : 0 | BS EN ISO 6719 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - MEASUREMENT OF REFLECTANCE CHARACTERISTICS OF ALUMINIUM SURFACES USING INTEGRATING-SPHERE INSTRUMENTS |
| AEP-64 : 2012 | PERFORMANCE REQUIREMENTS FOR PAINT SYSTEMS RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT |
| 09/30205293 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| EN ISO 28199-1:2009/AC:2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
| 10/30228342 DC : DRAFT SEP 2010 | BS EN ISO 20566 - PAINTS AND VARNISHES - DETERMINATION OF THE SCRATCH RESISTANCE OF A COATING SYSTEM USING A LABORATORY-SCALE CAR-WASH |
| UNE-EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| DIN EN ISO 6719:2011-02 | Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments (ISO 6719:2010) |
| 08/30194094 DC : 0 | BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| 97/126711 DC : DRAFT JAN 1998 | BS 3483-A8 - METHODS FOR TESTING PIGMENTS FOR PAINTS - PART A8: DETERMINATION OF RELATIVE TINTING STRENGTH AND RESIDUAL COLOUR DIFFERENCE OF COLORANTS - WEIGHTED K/S VALUE METHOD |
| BS EN ISO 6719:2010 | Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| DIN EN ISO 30013:2012-03 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| 10/30235547 DC : 0 | BS EN 60350-1 - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 1: RANGES, OVENS, STEAM OVENS AND GRILLS - METHODS FOR MEASURING PERFORMANCE |
| BS EN 15886:2010 | Conservation of cultural property. Test methods. Colour measurement of surfaces |
| AEP-60 : 2009 | PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
| DD CEN/TS 15679:2007 | Thermal modified timber. Definitions and characteristics |
| DD ENV 1729-2:2001 | Furniture. Chairs and tables for educational institutions Safety requirements and test methods |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| SAE AMS 3095 : 2004 | PAINT: HIGH GLOSS FOR AIRLINE EXTERIOR SYSTEM |
| CSA ISO/IEC 15415:2013 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE SYMBOL PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS |
| ISO 13468-1:1996 | Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument |
| PREN 2436-06 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| I.S. EN 4689:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| I.S. EN ISO 30013:2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011) |
| S.R. CEN/TS 16498:2013 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF TANNIN STAINING |
| UNI 11412 : 2011 | TITANIUM AND TITANIUM ALLOYS - SURFACE TREATMENTS - TESTS AND REQUIREMENTS |
| I.S. EN 60350:2009 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| UNE-CEN/TS 15679:2009 EX | Thermal Modified Timber - Definitions and characteristics |
| ONORM EN 927-6 : 2006 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| I.S. EN 13245-3:2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| I.S. EN 15836-1:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| UNI EN 13245-3 : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| I.S. 387:2012 | INTERNAL CORDED WINDOW PRODUCTS - SAFETY REQUIREMENTS |
| UNI ISO 3865 : 2010 | RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL |
| ISO 11347:2012 | Ships and marine technology Large yachts Measurement and assessment of the visual appearance of coatings |
| EN ISO 787-25:2006 | GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 25: COMPARISON OF THE COLOUR, IN FULL-SHADE SYSTEMS, OF WHITE, BLACK AND COLOURED PIGMENTS - COLORIMETRIC METHOD |
| EN ISO 6504-3:2007 | Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006) |
| DIN EN 13120:2014-09 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| DIN EN ISO 20566 E : 2013 | PAINTS AND VARNISHES - DETERMINATION OF THE SCRATCH RESISTANCE OF A COATING SYSTEM USING A LABORATORY-SCALE CAR-WASH (ISO 20566:2013) |
| EN ISO 3668:2001 | Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998) |
| DIN EN 13964:2014-08 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 2810:2004 | Paints and varnishes. Natural weathering of coatings. Exposure and assessment |
| BS EN 12877-4:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by two-roll milling |
| ISO 6719:2010 | Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| UNE-EN 1423:2013 | Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two |
| ISO 11341:2004 | Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation |
| BS EN 12608:2003 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods |
| ISO 6504-3:2006 | Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
| EN 60350 : 2009 + A11 2010 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| I.S. EN ISO/IEC 15416:2002 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS |
| EN 1871 : 2000 | ROAD MARKING MATERIALS - PHYSICAL PROPERTIES |
| I.S. EN ISO 2810:2004 | PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
| EN ISO 2810:2004 | Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004) |
| EN 13721:2004 | Furniture - Assessment of the surface reflectance |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| UNI EN 15187 : 2007 | FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE |
| UNI EN 13245-1 : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| UNI EN 13120 : 2014 | INTERNAL BLINDS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN 13964 : 2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNI EN 10245-4 : 2011 | Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires |
| UNI EN 1423 : 2012 | ROAD MARKING MATERIALS - DROP ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| UNE-EN ISO 28199-1:2010 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009) |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| BS 3900-D11:1998 | Methods of test for paints. Optical tests on paint films Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| BS ISO/IEC 29133:2010 | Information technology. Automatic identification and data capture techniques. Quality test specification for rewritable hybrid media data carriers |
| UNI EN 15836-1 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| UNI EN ISO 30013 : 2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
| BS EN 15836-1:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| 13/30275588 DC : 0 | BS EN ISO 4528 - VITREOUS AND PORCELAIN ENAMEL FINISHES - GUIDE TO SELECTION OF TEST METHODS FOR VITREOUS AND PORCELAIN ENAMELLED AREAS OF ARTICLES |
| I.S. EN 13900-4:2004 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 4: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF WHITE PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| BS EN 13245-3:2010 | Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles |
| I.S. EN 12373-12:2000 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 12: MEASUREMENT OF REFLECTANCE CHARACTERISTICS OF ALUMINIUM SURFACES USING INTEGRATING-SPHERE INSTRUMENTS |
| BS EN ISO 28199-2:2009 | Paints and varnishes. Evaluation of properties of coating systems related to the application process Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling |
| BS ISO/IEC 15415:2011 | Information technology. Automatic identification and data capture techniques. Bar code symbol print quality test specification. Two-dimensional symbols |
| UNI CEN/TS 16359 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| UNI CEN/TS 15679 : 2008 | THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS |
| UNI EN ISO 6719 : 2010 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - MEASUREMENT OF REFLECTANCE CHARACTERISTICS OF ALUMINIUM SURFACES USING INTEGRATING-SPHERE INSTRUMENTS |
| 08/30180844 DC : DRAFT JUNE 2008 | BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| PD CEN/TS 16359:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of knot staining resistance of wood coatings |
| I.S. ISO 7724-1:1988 | PAINTS AND VARNISHES - COLORIMETRY - PART 1: PRINCIPLES |
| BS EN ISO 28199-1:2009 | Paints and varnishes. Evaluation of properties of coating systems related to the application process Relevant vocabulary and preparation of test panels |
| 14/30299376 DC : 0 | BS ISO 23900-2 - PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 2: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION IN PLASTICIZED POLYVINYL CHLORIDE BY TWO-ROLL MILLING |
| DIN EN ISO 28199-2:2010-01 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2009) |
| 14/30291747 DC : 0 | BS EN 13523-15 - COIL COATED METALS - TEST METHODS - PART 15: METAMERISM |
| UNI EN ISO 28199-1 : 2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
| BS ISO 3865:2005 | Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| I.S. EN 15886:2010 | CONSERVATION OF CULTURAL PROPERTY - TEST METHODS - COLOUR MEASUREMENT OF SURFACES |
| PREN 4688 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| NF EN ISO 28199-1 : 2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
| PREN 4687 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| I.S. EN ISO 28762:2010 | VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION |
| ISO/IEC 29133:2010 | Information technology Automatic identification and data capture techniques Quality test specification for rewritable hybrid media data carriers |
| I.S. EN ISO 28199-2:2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 2: COLOUR STABILITY, PROCESS HIDING POWER, RE-DISSOLVING, OVERSPRAY ABSORPTION, WETTING, SURFACE TEXTURE AND MOTTLING |
| UNE-EN ISO 28199-2:2010 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2009) |
| EN 513:1999 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering |
| ISO/IEC 15415:2011 | Information technology Automatic identification and data capture techniques Bar code symbol print quality test specification Two-dimensional symbols |
| S.R. CEN TS 15534-3:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 3: CHARACTERISATION OF WPC PRODUCTS |
| UNE-EN 50304:2010 | Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance |
| DIN EN 13900-4:2004-07 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 4: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF WHITE PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| DIN EN ISO 2810:2004-10 | PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
| DIN EN 10245-4:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
| BS EN ISO 11341:2004 | Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation |
| BS EN ISO 3668:2001 | Paints and varnishes. Visual comparison of the colour of paints |
| ISO 20566:2013 | Paints and varnishes Determination of the scratch resistance of a coating system using a laboratory-scale car-wash |
| BS EN 13900-3:2003 | Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling |
| DIN EN 13245-1 E : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| BS EN ISO 11507:2007 | Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water |
| BS EN 14469-3:2004 | Pigments and extenders. Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) Determination of the relative tinting strength of white pigments |
| BS EN 12877-2:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by injection moulding |
| DIN EN 13245-1:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| UNE-EN 10245-4:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| BS EN 1635:1998 | Bar coding. Test specifications. Bar code symbols |
| BS EN 13245-1:2010 | Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Designation of PVC-U profiles |
| BS EN 10245-4:2011 | Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
| BS EN 12877-3:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics Determination by oven test |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| ISO 28762:2010 | Vitreous and porcelain enamels Enamel coatings applied to steel for writing surfaces Specification |
| BS EN 2435-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application |
| BS EN 13900-4:2004 | Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| UNE-EN ISO 20566:2013 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| ISO 11507:2007 | Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN ISO 28762 : 2010 | Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010) |
| EN 13900-2 : 2003 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 2: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION IN PLASTICIZED POLYVINYL CHLORIDE BY TWO-ROLL MILLING |
| EN 15886:2010 | Conservation of cultural property - Test methods - Colour measurement of surfaces |
| EN 1635 : 1997 | BAR CODING - TEST SPECIFICATIONS - BAR CODE SYMBOLS |
| ONORM EN 877 : 2008 | CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE |
| EN ISO 11341:2004 | Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:2004) |
| EN 14864:2005+A1:2007 | Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification |
| EN ISO 30013:2011 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| EN 13900-4 : 2004 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 4: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF WHITE PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| EN 14469-3 : 2004 | PIGMENTS AND EXTENDERS - TESTING OF COLOURING MATERIALS IN PLASTICIZED POLYVINYL CHLORIDE (PVC-P) - PART 3: DETERMINATION OF THE RELATIVE TINTING STRENGTH OF WHITE PIGMENTS |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN ISO/IEC 15415:2005/AC:2011 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS |
| EN 15187:2006 | FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE |
| EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| EN 2434-005:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
| EN ISO/IEC 15416:2001 | Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols (ISO/IEC 15416:2000) |
| EN 2435-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
| EN 10245-4:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| EN ISO 11507:2007 | Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007) |
| EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| EN ISO 13468-1:1996 | PLASTICS - DETERMINATION OF TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT |
| EN 2436-006:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
| EN 1423:2012/AC:2013 | ROAD MARKING MATERIALS - DROP ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| UNI EN ISO 28762 : 2011 | VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION |
| I.S. EN 13900-3:2003 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 3: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF BLACK AND COLOUR PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| 09/30205302 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| I.S. EN ISO 11341:2004 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| CEI UNI EN ISO 15415 : 2012 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS |
| UNE-EN ISO 28762:2011 | Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010) |
| BS EN 60350-2 : 2013 | HOUSEHOLD ELECTRIC COOKING APPLIANCES - HOBS - METHODS FOR MEASURING PERFORMANCE |
| 10/30196247 DC : 0 | BS ISO 12418-2 - PLASTICS - POST-CONSUMER POLY(ETHYLENE TEREPHTHALATE) (PET) BOTTLE REYCLATES - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 15836-2:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| 11/30237910 DC : 0 | BS EN 927-3 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| 13/30217369 DC : 0 | BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| ONORM EN 4689 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| ISO 3865:2005 | Rubber, vulcanized or thermoplastic Methods of test for staining in contact with organic material |
| I.S. EN ISO 6719:2010 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - MEASUREMENT OF REFLECTANCE CHARACTERISTICS OF ALUMINIUM SURFACES USING INTEGRATING-SPHERE INSTRUMENTS |
| NF EN 13245-3 : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| 06/30143171 DC : DRAFT SEP 2006 | BS 7412 - PLASTICS WINDOWS AND DOORSETS MADE FROM UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) EXTRUDED HOLLOW PROFILES |
| I.S. EN 50304:2009 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| 08/30189974 DC : DRAFT DEC 2008 | BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| BS EN 4688:2012 | Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application |
| 11/30233262 DC : 0 | BS EN 1871 - ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS |
| 08/30191159 DC : DRAFT DEC 2008 | BS EN 15886 - CONSERVATION OF CULTURAL PROPERTY - TEST METHODS - COLOUR MEASUREMENT OF SURFACES |
| DD CEN/TS 15534-3:2007 | Wood-plastics composites (WPC) Characterisation of WPC products |
| 08/30184621 DC : DRAFT SEP 2008 | BS EN 1423 - ROAD MARKING MATERIALS - DROPS ON MATERIALS - GLASS BEADS, ANTISKID AGGREGATES AND MIXTURES OF THE TWO |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| UNE-EN 13245-3:2011 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| UNI EN ISO 20566 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF THE SCRATCH RESISTANCE OF A COATING SYSTEM USING A LABORATORY-SCALE CAR-WASH |
| NF EN ISO 6719 : 2010 | ANODIZING OF ALUMINIUM AND ITS ALLOYS - MEASUREMENT OF REFLECTANCE CHARACTERISTICS OF ALUMINIUM SURFACES USING INTEGRATING-SPHERE INSTRUMENTS |
| BS EN ISO 787-25:2006 | General methods of test for pigments and extenders Comparison of the colour, in full-shade systems, of white, black and coloured pigments. Colorimetric method |
| ISO 11798:1999 | Information and documentation — Permanence and durability of writing, printing and copying on paper — Requirements and test methods |
| PREN 13964 : DRAFT 2013 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| PREN 927-3 : DRAFT 2011 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| ISO 787-25:1993 | General methods of test for pigments and extenders Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments Colorimetric method |
| CSA ISO/IEC 29133:14 (R2019) | Information technology - Automatic identification and data capture techniques - Quality test specification for rewritable hybrid media data carriers (Adopted ISO/IEC 29133:2010, first edition, 2010-05-15) |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| I.S. CEN TS 15354:2006 | PLASTICS - EXTRUDED AND/OR CALENDERED, NON-REINFORCED FILM AND SHEETING MADE OF PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) - GUIDANCE FOR CHARACTERISATION AND DESIGNATION |
| S.R. CEN TS 15534-1:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
| S.R. CEN/TS 15679:2007 | THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN ISO 787-25:2006 | GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 25: COMPARISON OF THE COLOUR, IN FULL-SHADE SYSTEMS, OF WHITE, BLACK AND COLOURED PIGMENTS - COLORIMETRIC METHOD |
| I.S. EN ISO 28199-1:2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
| ISO 14782:1999 | Plastics Determination of haze for transparent materials |
| BS EN 13120:2009+A1:2014 | Internal blinds. Performance requirements including safety |
| DIN EN ISO 6504-3:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| UNE-EN 13964:2016 | Suspended ceilings - Requirements and test methods |
| ISO 30013:2011 | Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties |
| UNE-EN 13245-1:2011 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| BS EN 12877-1:2000 | Colouring materials in plastics. Determination of colour stability to heat during processing of colouring materials in plastics General introduction |
| BS EN 13200-4:2006 | Spectator facilities Seats. Product characteristics |
| BS EN 13721:2004 | Furniture. Assessment of the surface reflectance |
| BS EN 1871:2000 | Road marking materials. Physical properties |
| BS EN 2434-005 : 2006 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| BS EN 15187:2006 | Furniture. Assessment of the effect of light exposure |
| DIN EN 13900-3:2003-06 | PIGMENTS AND EXTENDERS - METHODS OF DISPERSION AND ASSESSMENT OF DISPERSIBILITY IN PLASTICS - PART 3: DETERMINATION OF COLOURISTIC PROPERTIES AND EASE OF DISPERSION OF BLACK AND COLOUR PIGMENTS IN POLYETHYLENE BY TWO-ROLL MILLING |
| DIN EN 13721:2004-10 | Furniture - Assessment of the surface reflectance |
| CEN/TS 15534-3:2007 | Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products |
| EN 50304 : 2009 AMD 1 2010 | ELECTRIC COOKING RANGES, HOBS, OVENS AND GRILLS FOR HOUSEHOLD USE - METHODS FOR MEASURING PERFORMANCE |
| DIN EN 15187:2006-12 | Furniture - Assessment of the effect of light exposure |
| EN 12608:2003 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods |
| DIN EN 14864:2007-12 | VITREOUS AND PORCELAIN ENAMELS - ENAMEL COATINGS APPLIED TO STEEL FOR WRITING SURFACES - SPECIFICATION |
| EN 13200-4:2006 | Spectator facilities - Part 4: Seats - Product characteristics |
| CEN/TS 16359 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| EN 13245-1:2010 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| CEN/TS 15354:2006 | Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation |
| DIN EN ISO 787-25:2007-02 | GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 25: COMPARISON OF THE COLOUR, IN FULL-SHADE SYSTEMS, OF WHITE, BLACK AND COLOURED PIGMENTS - COLORIMETRIC METHOD |
| UNE-EN 60350-2:2014 | Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| ISO 3534:1977 | Statistics — Vocabulary and symbols |
| ISO 1512:1991 | Paints and varnishes Sampling of products in liquid or paste form |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
US$73.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.