• There are no items in your cart

ISO 8015:2011

Current
Current

The latest, up-to-date edition.

Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English

Published date

05-23-2011

ISO 8015:2011 specifies fundamental concepts, principles and rules valid for the creation, interpretation and application of all other International Standards, Technical Specifications and Technical Reports concerning geometrical product specifications (GPS) and verification.

It applies to the interpretation of GPS indications on all types of drawings. For the purposes of ISO 8015:2011, the term "drawing" is to be interpreted in the broadest possible sense, encompassing the total package of documentation specifying the workpiece.

DevelopmentNote
Supersedes ISO/DIS 8015. (05/2011)
DocumentType
Standard
Pages
11
PublisherName
International Organization for Standardization
Status
Current
Supersedes

CEI EN 50377-8-13 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U
DIN EN ISO 16610-22:2016-04 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015)
DIN EN ISO 16610-61:2016-04 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS: GAUSSIAN FILTERS (ISO 16610-61:2015)
DIN EN ISO 16610-85:2013-05 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013)
UNE-EN ISO 10360-8:2017 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013)
I.S. EN ISO 25178-3:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS (ISO 25178-3:2012)
UNI EN ISO 10360-8 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS
I.S. EN ISO 16610-61:2015 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS - GAUSSIAN FILTERS (ISO 16610-61:2015)
DIN 47256-7:1993-02 (Draft) OPTICAL FIBRE CONNECTORS WITH SCREW COUPLING - TYPE LSA - CONNECTOR KIT - DETAIL SPECIFICATION
UNI EN ISO 12781-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS
BS EN 50377-8-13:2010 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U
14/30272936 DC : 0 BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES
BS EN ISO 2538-2:2014 Geometrical product specifications (GPS). Wedges Dimensioning and tolerancing
DIN ISO 2692:1990-05 TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL PRINCIPLE
14/30272942 DC : 0 BS EN ISO 18391 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - POPULATION SPECIFICATION
BIS IS/ISO 7388-1 : 2007 TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS A, AD, AF, U, UD AND UF
ISO 17450-4:2017 Geometrical product specifications (GPS) — Basic concepts — Part 4: Geometrical characteristics for quantifying GPS deviations
UNE-EN ISO 25178-2:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
DIN ISO 7388-1 E : 2014 TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS A, AD, AF, U, UD AND UF (ISO 7388-1:2007)
DIN EN ISO 16610-21:2013-06 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011)
BS EN ISO 12780-1:2011 Geometrical product specifications (GPS). Straightness Vocabulary and parameters of straightness
BS EN ISO 12781-2:2011 Geometrical product specifications (GPS). Flatness Specification operators
13/30286407 DC : 0 BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
BS EN ISO 25178-604:2013 Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments
BS ISO 10889-6:2016 Tool holders with cylindrical shank Type E with cylindrical seat
BS EN ISO 14405-1:2010 Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes
BS EN ISO 12780-2:2011 Geometrical product specifications (GPS). Straightness Specification operators
BS EN ISO 3040:2016 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
BIS IS/ISO 7388-3 : 2007 TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 3: RETENTION KNOBS FOR SHANKS OF FORMS AC, AD, AF, UC, UD, UF, JD AND JF
UNE-EN 50377-4-2:2015 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
I.S. EN ISO 16610-71:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-71:2014)
UNE-EN ISO 12781-2:2012 Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
I.S. EN ISO 16610-30:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 30: ROBUST PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-30:2015)
UNI EN ISO 12780-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
BS EN 62664-1-1:2013 Fibre optic interconnecting devices and passive components. Fibre optic connector product specifications LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre
17/30341082 DC : 0 BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
14/30299349 DC : 0 BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES
BS EN ISO 25178-3:2012 Geometrical product specifications (GPS). Surface texture: Areal Specification operators
PD CEN ISO/TS 15530-1:2013 Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics
DIN ISO 3601-2:2010-08 Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008)
CEI EN 62664-1-1 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS - PART 1-1: LC-PC DUPLEX MULTI MODE CONNECTORS TERMINATED ON IEC 60793-2 CATEGORY A1A FIBRE
DIN EN ISO 14405-3 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016)
DIN EN ISO 12180-1:2011-07 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
BS ISO 10135:1994 Technical drawings. Simplified representation of moulded, cast and forged parts
BS ISO 10889-2:2016 Tool holders with cylindrical shank Type A, shanks for tool holders of special designs
DIN 47257-5:1990-06 (Draft) OPTICAL FIBRE CONNECTOR FOR SLIDE-IN-UNITS - TYPE LSB - DETAIL SPECIFICATION FOR ADAPTER WITH RESILIENT SLEEVE
DIN EN ISO 12780-1:2014-04 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
DIN 47256-6:1990-06 (Draft) OPTICAL FIBRE CONNECTOR WITH SCREW COUPLING - TYPE LSA - DETAIL SPECIFICATION FOR ADAPTER WITH RESILIENT SLEEVE
PD IEC/TS 62886:2016 Electroacoustics. Hearing aids. Method for measuring electroacoustic performance up to 16 kHz
BS EN ISO 14253-3:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements
16/30339565 DC : 0 BS ISO 12297-2 - ROLLING BEARINGS - CYLINDRICAL ROLLERS - PART 2: CERAMIC ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
BS EN ISO 8062-3:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional and geometrical tolerances and machining allowances for castings
BS ISO 1101:1983 Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings
I.S. EN ISO 14638:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
I.S. EN ISO 1938-2:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
I.S. EN ISO 17450-2:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
UNE-EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
BS EN ISO 17450-3:2016 Geometrical product specifications (GPS). General concepts Toleranced features
08/30174605 DC : DRAFT SEP 2008 BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
ISO 10889-2:2016 Tool holders with cylindrical shank Part 2: Type A, shanks for tool holders of special designs
UNE-EN ISO 17450-2:2015 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
I.S. EN ISO 15530-3:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011)
NF ISO 9270-2 : 2010 7/24 TAPER FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF
DIN ISO 7388-3:2015-03 TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 3: RETENTION KNOBS FOR SHANKS OF FORMS AC, AD, AF, UC, UD, UF, JD AND JF (ISO 7388-3:2013)
CEI EN 50377-13-3 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
I.S. EN ISO 25178-70:2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
I.S. EN ISO 17450-4:2018 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING GPS DEVIATIONS (ISO 17450-4:2017)
ISO 10110-1:2006 Optics and photonics Preparation of drawings for optical elements and systems Part 1: General
I.S. EN ISO 10135:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
AWS C4.6M : 2006 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
I.S. EN 61754-34:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 34: TYPE URM CONNECTOR FAMILY
I.S. EN ISO 14405-1:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO/DIS 14405-1:2013)
I.S. EN ISO 14405-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
I.S. EN 61754-28:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 28: TYPE LF3 CONNECTOR FAMILY (IEC 61754-28:2012 (EQV))
ISO 16792:2015 Technical product documentation Digital product definition data practices
UNI EN ISO 22432 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FEATURES UTILIZED IN SPECIFICATION AND VERIFICATION
UNI EN ISO 14253-3 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
UNI EN ISO 25178-3 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS
ISO 6195:2013 Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances
UNE-EN ISO 14405-1:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2010)
I.S. EN ISO 17450-3:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS PART 3: TOLERANCED FEATURES (ISO 17450-3:2016)
I.S. EN 50377-4-2:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREES TERMINATED ON IEC 60793-2-50 OF TYPES B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
UNE-EN ISO 2538-2:2015 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
UNE-EN ISO 12181-1:2012 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010)
UNI EN ISO 12180-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
NF EN 50377-2-2 : 2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C
UNI EN ISO 17450-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES
I.S. EN ISO 10360-9:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013)
I.S. EN ISO 25178-1:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE (ISO 25178-1:2016)
UNE-EN ISO 14405-2:2015 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
ISO 7465:2007 Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type
BS EN ISO 2692:2014 Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
IEC 61754-28:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 28: Type LF3 connector family
ISO 25178-72:2017 Geometrical product specifications (GPS) Surface texture: Areal Part 72: XML file format x3p
ISO 25178-2:2012 Geometrical product specifications (GPS) Surface texture: Areal Part 2: Terms, definitions and surface texture parameters
UNE-EN ISO 14405-1:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
EN ISO 12780-2:2011 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
EN 50377-13-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-2: Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
EN 10243-1:1999/AC:2005 STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 1: DROP AND VERTICAL PRESS FORGINGS
EN ISO 12181-1 : 2011 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
EN 50377-2-2 : 2009 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-2: FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C
EN ISO 25178-2:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
EN 50377-4-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
EN 50377-8-10:2010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-10: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
EN ISO 14253-3:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
EN 10243-2:1999/AC:2005 STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 2: UPSET FORGING MADE ON HORIZONTAL FORGING MACHINES
EN ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
EN ISO 13102:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
EN 61754-32:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32: Type DiaLink connector family
EN ISO 12780-1:2011 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
EN 50516-2-1 : 2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
DIN EN ISO 1101:2017-09 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017)
EN 50377-13-3:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
EN 12101-7:2011 Smoke and heat control systems - Part 7: Smoke duct sections
EN 186180 : 1994 Sectional Specification: Connector sets for optical fibres and cables - Type LSB
EN 186220:1993 Sectional Specification: Connector sets for optical fibres and cables - Type LSC
EN 186270:1997 Sectional Specification: Connector sets for optical fibres and cables - Type LSH
DIN EN ISO 1938-1:2016-03 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
DIN SPEC 91184 E : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
DIN EN ISO 10135:2010-02 Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
BS ISO 7388-3:2016 Tool shanks with 7/24 taper for automatic tool changers Retention knobs of forms AD, AF, UD, UF, JD and JF
DIN ISO 7388-2 E : 2014 TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS J, JD AND JF (ISO 7388-2:2007)
BS EN ISO 25178-2:2012 Geometrical product specifications (GPS). Surface texture. Areal Terms, definitions and surface texture parameters
BS EN ISO 10135:2009 Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
BS EN 61754-28:2012 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type LF3 connector family
BS EN ISO 16610-61:2015 Geometrical product specification (GPS). Filtration Linear areal filters. Gaussian filters
PD ISO/TS 17863:2013 Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
DIN ISO 2768-2:1991-04 General tolerances; geometrical tolerances for features without individual tolerances indications; identical with ISO 2768-2:1989
BS EN ISO 13225:2012 Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics
UNE-EN ISO 13385-2:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
I.S. EN ISO 10360-8:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013)
DIN EN ISO 2538-2:2015-01 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
DIN EN ISO 2538-1 E : 2015 GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES (ISO 2538-1:2014)
06/30127629 DC : DRAFT JULY 2006 EN ISO 21078-1 - DETERMINATION OF BORON (3) OXIDE IN REFRACTORY PRODUCTS - PART 1: DETERMINATION OF TOTAL BORIC OXIDE IN OXIDIC MATERIALS FOR CERAMICS, GLASS AND GLAZES
15/30295114 DC : 0 BS EN ISO 25178-71 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 71: SOFTWARE MEASUREMENT STANDARDS
UNI EN ISO 12181-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
BS ISO 10110-1:2006 Optics and photonics. Preparation of drawings for optical elements and systems General
BS ISO 7789:2007 Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities
DIN ISO 10110-1:2007-08 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 1: GENERAL
BS EN 12101-7:2011 Smoke and heat control systems Smoke duct sections
BS EN 50377-8-12:2010 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
BS EN ISO 25178-72:2017 Geometrical product specifications (GPS). Surface texture: Areal XML file format x3p
BS EN ISO 13385-2:2011 Geometrical product specifications (GPS). Dimensional measuring equipment Calliper depth gauges. Design and metrological characteristics
BS ISO 8062-4:2017 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General tolerances for castings using profile tolerancing in a general datum system
PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules
BS 4500-1.2(1990) : AMD 7631 ISO LIMITS AND FITS - GENERAL, TOLERANCES AND DEVIATIONS - TABLES OF COMMONLY USED TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
BS EN ISO 17450-2:2012 Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities
BS EN ISO 12180-1:2011 Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form
BS ISO 199:2014 Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values
13/30292791 DC : 0 BS EN ISO 14405-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES
DIN EN ISO 10360-9:2014-04 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013)
I.S. EN ISO 13102:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012)
DIN EN ISO 13385-1:2011-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011)
15/30295117 DC : 0 BS EN ISO 5458 - GEOMENTRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL AND PATTERN TOLERANCING
UNI EN ISO 2538-1 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES
BS EN 186270:1998 Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type LSH
BIS IS/ISO 7388-2 : 2007 TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS J, JD AND JF
BS ISO 3601-2:2016 Fluid power systems. O-rings Housing dimensions for general applications
BS EN ISO 16610-30:2017 Geometrical product specifications (GPS). Filtration Robust profile filters: Basic concepts
BS EN 50377-4-4:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS EN 50377-4-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
UNI EN ISO 8062-3 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
DIN EN ISO 22432:2012-03 Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
PD 8888:2001 Technical product documentation (TPD). An interim report
BS EN ISO 12781-1:2011 Geometrical product specifications (GPS). Flatness Vocabulary and parameters of flatness
14/30262683 DC : 0 BS ISO 8062-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 4: GENERAL TOLERANCES FOR CASTINGS USING PROFILE TOLERANCING IN A GENERAL DATUM SYSTEM
PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
BS EN ISO 2538-1:2014 Geometrical product specifications (GPS). Wedges Series of angles and slopes
08/30184358 DC : 0 BS ISO 9270-1 - 7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF
06/30134385 DC : DRAFT JULY 2006 ISO 3937-1 - CUTTER ARBORS WITH TENON DRIVE - PART 1: DIMENSIONS OF MORSE TAPER
UNI EN ISO 10135 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
BS ISO 10959:2016 Aerospace. MJ threads. Gauging
08/30184361 DC : 0 BS ISO 9270-2 - 7/24 TAPERS FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2 - DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF
17/30341085 DC : 0 BS EN ISO 13385-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: DESIGN AND METROLOGICAL CHARACTERISTICS OF CALLIPERS
I.S. EN ISO 25178-72:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 72: XML FILE FORMAT X3P (ISO 25178-72:2017)
EN ISO 2692:2014 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
UNI EN ISO 25178-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 2: TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
IEC TS 62886:2016 Electroacoustics - Hearing aids - Method for measuring electroacoustic performance up to 16 kHz
DIN EN ISO 12781-1:2011-07 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
DIN ISO 15786:2014-12 TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION AND DIMENSIONING OF HOLES (ISO 15786:2008)
CEI EN 50377-2-2 : 2010 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C
ISO 25178-71:2017 Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards
UNE-EN ISO 2538-1:2015 Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
UNE-EN ISO 12180-2:2012 Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
UNE-EN ISO 12181-2:2012 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
I.S. EN ISO 12181-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
NF ISO 128-1 : 2003 TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 1: INTRODUCTION AND INDEX
I.S. EN ISO 22432:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FEATURES UTILIZED IN SPECIFICATION AND VERIFICATION (ISO 22432:2011)
BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes
I.S. EN ISO 13385-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS
UNI EN ISO 13385-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS
UNI ISO 7465 : 2010 PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
DIN EN ISO 14405-2:2012-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
I.S. EN ISO 10360-12:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 12: ARTICULATED ARM COORDINATE MEASUREMENT MACHINES (CMM) (ISO 10360-12:2016)
UNE-EN ISO 12180-1:2012 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
UNI EN ISO 13102 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS
EN ISO 14253-1:2017 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
ISO/TR 17209:2013 Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities with ISO 725 (UN and UNF) threads
DIN EN ISO 14253-1:2013-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013)
EN ISO 16610-61:2015 Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015)
UNE-EN ISO 2692:2015 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
ISO 8062-3:2007 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings
ISO 25178-70:2014 Geometrical product specification (GPS) Surface texture: Areal Part 70: Material measures
ISO 13225:2012 Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics
BS EN ISO 5436-2:2012 Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards Software measurement standards
I.S. EN ISO 1119:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011)
I.S. EN ISO 9013:2017 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
DIN ISO 16792:2008-12 TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
I.S. EN 22768-2:1994 GENERAL TOLERANCES - GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
I.S. EN ISO 10303-210:2002 INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 210: APPLICATION PROTOCOL: ELECTRONIC ASSEMBLY, INTERCONNECTION, AND PACKAGING DESIGN
I.S. EN ISO 1101:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017)
I.S. EN ISO 2692:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
EN 22768-2:1993 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
I.S. EN ISO 5436-2:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012)
I.S. EN ISO 1660:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017)
BS 308-1:1984 Engineering drawing practice Recommendations for general principles
BS 308-2:1985 Engineering drawing practice Recommendations for dimensioning and tolerancing of size
BS 308-3:1990 Engineering drawing practice Recommendations for geometrical tolerancing
VDI 3414 Blatt 1:2014-02 (Draft) Quality evaluation of wooden surfaces - Surface characteristics
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
I.S. EN ISO 12180-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM
BS EN 50516-2-1:2011 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
17/30348149 DC : 0 BS ISO 3096 - ROLLING BEARINGS - NEEDLE ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
I.S. EN 50377-2-2:2009 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-2: FC/APC 8 TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE, CATEGORY C
DIN EN ISO 13225:2012-08 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
UNI EN ISO 17450-1 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION
14/30291693 DC : 0 BS ISO 21927-7 - SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCTS SECTIONS
UNI EN ISO 25178-604 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS
BS ISO 10889-7:2016 Tool holders with cylindrical shank Type F with taper seat
BS ISO 3937-1:2008 Cutter arbors with tenon drive Dimensions of Morse taper
DIN EN ISO 8062-3 E : 2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
17/30348146 DC : 0 BS ISO 7063 - ROLLING BEARINGS - NEEDLE ROLLER BEARING TRACK ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
BS ISO 464:2015 Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values
PD ISO/TR 10064-6:2009 Code of inspection practice Bevel gear measurement methods
BS EN 50516-1-1:2011 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3
BS EN ISO 18391:2016 Geometrical product specifications (GPS). Population specification
BS EN ISO 1938-2:2017 Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges
AWS C4.6M:2006(R2012) THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
CEI EN 186270 : 1998 SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE LSH
BS EN ISO 12181-1:2011 Geometrical product specifications (GPS). Roundness Vocabulary and parameters of roundness
BS EN ISO 10360-8:2013 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with optical distance sensors
CEI EN 50516-1-1 : 2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
BS EN ISO 15530-3:2011 Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or measurement standards
BS 4500-1.1(1990) : AMD 7630 ISO LIMITS AND FITS - GENERAL, TOLERANCES AND DEVIATIONS - SPECIFICATION FOR BASES OF TOLERANCES, DEVIATIONS AND FITS
DIN EN ISO 16610-85 E : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013)
DIN EN ISO 12781-2:2011-07 Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
DIN 7167:1987-01 RELATIONSHIP BETWEEN DIMENSIONAL TOLERANCES AND FORM AND PARALLELISM TOLERANCES - ENVELOPE PRINCIPLE WITHOUT DRAWING INDICATION
UNE-EN ISO 25178-3:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
BS EN ISO 25178-606:2015 Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments
BS EN 50377-13-3:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS ISO 10766:2014 Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
DIN EN ISO 12180-2:2011-07 Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
BS EN ISO 25178-603:2013 Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
UNI EN ISO 2538-2 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING
BS EN ISO 14405-3:2017 Geometrical product specifications (GPS). Dimensional tolerancing Angular sizes
BS EN ISO 16610-71:2014 Geometrical product specifications (GPS). Filtration Robust areal filters: Gaussian regression filters
BS EN 50377-8-10:2010 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
16/30338746 DC : DRAFT APR 2016 BS ISO 15872 - AEROSPACE - UNJ THREADS - GAUGING
DIN EN ISO 8062-3:2008-09 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
UNI EN ISO 12780-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
06/30147859 DC : DRAFT MAR 2006 ISO 7388-2 - TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SHANKS FOR FORMS J, JD AND JF
UNI EN ISO 15530-3 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS
DIN EN ISO 14638 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
DIN EN ISO 25178-70:2014-06 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
DIN EN ISO 16610-21 E : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011)
BS EN ISO 14253-5:2015 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Uncertainty in verification testing of indicating measuring instruments
BS ISO 10889-5:2016 Tool holders with cylindrical shank Type D with more than one rectangular seat
BS EN 50377-8-11:2010 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
BS EN 61754-15:2009 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type LSH connector family
06/30128792 DC : DRAFT JUN 2006 ISO 7789 - HYDRAULIC FLUID POWER - TWO, THREE AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES
UNE-EN ISO 17450-3:2017 Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
I.S. EN ISO 16610-21:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011)
UNE-EN 12101-7:2013 Smoke and heat control systems - Part 7: Smoke duct sections
CEI EN 50377-8-11 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
DIN EN ISO 2538-1:2015-01 GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES; (ISO 2538-1:2014)
12/30262212 DC : 0 BS EN 50516-3-1 - INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
ISO 12297-2:2018 Rolling bearings — Cylindrical rollers — Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
BS EN 50377-13-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS EN ISO 13102:2012 Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics
BS EN 61754-32:2016 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type DiaLink connector family
BS EN ISO 10360-9:2013 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with multiple probing systems
UNE-EN ISO 17450-1:2015 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
UNI EN ISO 16610-71 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS
BS ISO 15786:2008 Technical drawings. Simplified representation and dimensioning of holes
BS EN 50516-3-1:2014 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
12/30264410 DC : 0 BS ISO 199 - ROLLING BEARINGS - THRUST BEARINGS - TOLERANCES
08/30193101 DC : 0 BS EN 50377-4-2 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREE TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
BS EN ISO 25178-70:2014 Geometrical product specification (GPS). Surface texture: Areal Material measures
DIN 7168:1991-04 GENERAL TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS AND GENERAL GEOMETRICAL TOLERANCES
DIN EN ISO 1660 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017)
I.S. EN 61754-32:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 32: TYPE DIALINK CONNECTOR FAMILY
DIN EN ISO 25178-603:2014-02 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013)
I.S. EN ISO 5459:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
CEI EN 50377-13-2 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
CEI EN 50377-8-12 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U
DIN ISO 7388-2:2014-07 Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF (ISO 7388-2:2007)
ISO/TR 14253-6:2012 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
ISO 7388-3:2016 Tool shanks with 7/24 taper for automatic tool changers Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
ISO 10360-12:2016 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 12: Articulated arm coordinate measurement machines (CMM)
NF EN 50377-4-4 : 2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
ISO 3937-1:2008 Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper
BS ISO 16610-30:2015 Geometrical product specifications (GPS). Filtration Robust profile filters: Basic concepts
ISO 10889-5:2016 Tool holders with cylindrical shank Part 5: Type D with more than one rectangular seat
I.S. EN 50377-8-10:2010 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
CEI EN 50516-2-1 : 2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
S.R. CEN ISO/TS 8062-2:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
I.S. EN ISO 16610-85:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013)
I.S. EN 186270:1998 CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE LSH (SECTIONAL SPECIFICATION)
I.S. EN ISO 3040:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - CONES (ISO 3040:2016)
UNI EN ISO 25178-70 : 2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES
I.S. EN ISO 12781-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS
ISO 3937-3:2008 Cutter arbors with tenon drive — Part 3: Dimensions of hollow taper interface with flange contact surface
ABMA ISO 199 : 2014 ROLLING BEARINGS - THRUST BEARINGS - GEOMETRICAL PRODUCT SPECIFICATION (GPS) AND TOLERANCE VALUES
ISO 14405-2:2011 Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes
UNI EN ISO 13225 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS
I.S. EN ISO 16610-41:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015)
UNI EN ISO 5459 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
I.S. EN ISO 12781-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
ISO/TS 17863:2013 Geometrical product specification (GPS) Tolerancing of moveable assemblies
ISO 5597:2010 Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
ISO 10766:2014 Hydraulic fluid power Cylinders Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
ISO 5458:1998 Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing
ISO 9270-1:2010 7/24 taper spindle noses for automatic tool changers Part 1: Dimensions and designation of spindle noses of forms S and SF
ISO 14253-1:2017 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
DIN EN ISO 9013 E : 2003 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
DIN EN ISO 2692:2015-12 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
DIN EN ISO 13920:1996-11 General tolerances for welded constructions - Tolerances for lengths, angles, shape and position (ISO 13920:1996)
DIN EN ISO 9013:2003-07 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
UNE-EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
BS EN 22768-2:1993 General tolerances Geometrical tolerances for features without individual tolerance indications
ISO 10135:2007 Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
ISO 464:2015 Rolling bearings Radial bearings with locating snap ring Dimensions, geometrical product specifications (GPS) and tolerance values
ISO 14405-1:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
ISO/TS 15530-1:2013 Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 1: Overview and metrological characteristics
I.S. EN ISO 13385-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS
EN ISO 13385-2:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011)
EN ISO 25178-72:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017)
EN ISO 4759-1 : 2000 TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C
EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
UNI EN ISO 1119 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPERS ANGLES
EN 61754-34:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 34: Type URM connector family
UNI EN 20286-1 : 1995 ISO SYSTEM OF LIMITS AND FITS - BASES OF TOLERANCES, DEVIATIONS AND FITS
UNI EN ISO 5436-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS
UNE-EN ISO 12780-2:2012 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
DIN EN ISO 16610-41:2015-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015)
DIN EN ISO 14405-1:2017-07 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2016)
16/30341970 DC : 0 BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
BS EN ISO 12181-2:2011 Geometrical product specifications (GPS). Roundness Specification operators
DIN EN ISO 13102:2012-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012)
I.S. EN 50377-8-11:2010 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-11: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
99/702254 DC : DRAFT JAN 1999 ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE
14/30261577 DC : 0 BS EN ISO 9013 - THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES
ISO 3937-2:2008 Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper
UNI CEN ISO/TS 15530-1 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS
13/30284676 DC : 0 BS EN ISO 1660 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING
BS ISO 5597:2010 Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
04/30086896 DC : DRAFT JUN 2004 ISO 10110-1 - OPTICS AND OPTICAL INSTRUMENTS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 1: GENERAL
UNI EN ISO 16610-21 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS
UNI EN ISO 10360-9 : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS
DIN ISO 286-2:1990-11 ISO SYSTEM OF LIMITS AND FITS - TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
BS EN ISO 14253-2:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
DIN ISO 7388-1:2014-07 TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS A, AD, AF, U, UD AND UF (ISO 7388-1:2007)
DIN EN ISO 14638:2015-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
12/30262692 DC : 0 BS ISO 16610-61 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS - GAUSSIAN FILTERS
UNI EN ISO 12180-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
BS ISO 3937-2:2008 Cutter arbors with tenon drive Dimensions of 7/24 taper
DIN EN ISO 12780-2:2011-07 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
UNI CEN ISO/TS 8062-2 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
BS ISO 10889-3:2016 Tool holders with cylindrical shank Type B with rectangular radial seat
14/30257552 DC : 0 BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES
BS ISO 21927-7:2017 Smoke and heat control systems Smoke ducts sections
BS EN ISO 16610-41:2015 Geometrical product specifications (GPS). Filtration Morphological profile filters: Disk and horizontal line-segment filters
16/30314605 DC : DRAFT MAR 2016 BS EN ISO 5459 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
UNE-EN ISO 16610-21:2013 Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
06/30147863 DC : DRAFT MAR 2006 ISO 7388-3 - TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC CHANGERS - PART 3: RETENTION KNOBS FOR FORMS AC, AD, AF, UC, UD, UF, JD AND JF
DIN ISO 2768-1:1991-06 GENERAL TOLERANCES - TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
CEI EN 50377-8-10 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-10: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY C
12/30230676 DC : 0 BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
BS EN 61754-34:2016 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type URM connector family
UNE-EN ISO 12781-1:2012 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
UNE-EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
DIN ISO 1101:1985-03 TECHNICAL DRAWINGS, GEOMETRICAL TOLERANCING, TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUNOUT - GENERALITIES, DEFINITIONS, SYMBOLS ON DRAWINGS
BS EN ISO 22432:2011 Geometrical product specifications (GPS). Features utilized in specification and verification
BS EN ISO 14638:2015 Geometrical product specifications (GPS). Matrix model
14/30310774 DC : 0 BS EN 61754-32 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 32: TYPE DIALINK CONNECTOR FAMILY
16/30333694 DC : 0 BS EN ISO 14253-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS
I.S. EN ISO 16610-1:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
DIN EN ISO 25178-2:2012-09 Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012)
DIN EN ISO 16610-31 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)
PD ISO/TR 17209:2013 Hydraulic fluid power. Two-, three-and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threads
06/30147852 DC : DRAFT MAR 2006 ISO 7388-1 - TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS FOR FORMS A, B, AD, U, V AND UV
04/30125936 DC : DRAFT NOV 2004 ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS
DIN EN ISO 16610-22 E : 2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015)
BS EN ISO 16610-85:2013 Geometrical product specifications (GPS). Filtration Morphological areal filters: Segmentation
DIN ISO 15786 E : 2014 TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION AND DIMENSIONING OF HOLES (ISO 15786:2008)
BS ISO 492:2014 Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
NF ISO 9270-1 : 2010 7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF
BS ISO 15872:2017 Aerospace. UNJ threads. Gauging
BS ISO 3937-3:2008 Cutter arbors with tenon drive Dimensions of hollow taper interface with flange contact surface
BS ISO 6195:2013 Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
BS ISO 16792:2006 Technical product documentation. Digital product definition data practices
UNE-EN ISO 12780-1:2012 Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011)
I.S. EN ISO 12780-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS
ISO 7789:2007 Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities
I.S. EN ISO 2538-2:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014)
DIN EN ISO 16610-61 E : 2016 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS: GAUSSIAN FILTERS (ISO 16610-61:2015)
DIN ISO 286-1:1990-11 ISO SYSTEM OF LIMITS AND FITS - BASES OF TOLERANCES, DEVIATIONS AND FITS
ISO 10889-7:2016 Tool holders with cylindrical shank Part 7: Type F with taper seat
DIN EN ISO 14253-3:2011-10 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011)
DIN EN ISO 2538-2 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014)
DIN EN ISO 12181-1:2011-07 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011)
17/30346164 DC : 0 BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
DIN EN ISO 16610-71:2014-12 Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014)
ISO 10889-6:2016 Tool holders with cylindrical shank Part 6: Type E with cylindrical seat
I.S. EN ISO 25178-2:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 2: TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS (ISO 25178-2:2012)
UNI EN ISO 12781-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS
CEI EN 50377-4-2 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-2: TYPE SC/APC SIMPLEX 8 DEGREES TERMINATED ON IEC 60793-2-50 OF TYPES B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
CEI EN 50516-3-1 : 2014 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
I.S. EN ISO 14253-1:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2017)
UNE-EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
I.S. EN ISO 13225:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13225:2012)
I.S. EN 50377-13-2:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-2: TYPE LX.5-PC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
I.S. EN 50516-2-1:2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
I.S. EN 50377-13-3:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 13-3: TYPE LX.5-APC DUPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
I.S. EN ISO 14253-3:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS
I.S. EN 186180:1995 CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE LSB (SECTIONAL SPECIFICATION)
I.S. EN 50516-3-1:2014 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
ISO/TR 10064-6:2009 Code of inspection practice Part 6: Bevel gear measurement methods
I.S. EN ISO 16610-31:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)
ISO 8062-4:2017 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system
S.R. CEN ISO/TS 15530-1:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS (ISO/TS 15530-1:2013)
DIN EN ISO 15530-3:2012-01 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011)
I.S. EN ISO 25178-604:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013)
I.S. EN ISO 17450-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO 17450-1:2011)
I.S. EN ISO 8062-3:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
I.S. EN ISO 2538-1:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES (ISO 2538-1:2014)
I.S. EN 61754-15:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 15: TYPE LSH CONNECTOR FAMILY
ISO 199:2014 Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values
ISO 3245:2015 Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
I.S. EN 12101-7:2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS
UNE-EN ISO 14253-1:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification (ISO 14253-1:2013)
I.S. EN ISO 25178-71:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 71: SOFTWARE MEASUREMENT STANDARDS (ISO 25178-1:2017)
DIN EN ISO 14253-2:2011-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION (ISO 14253-2:2011)
I.S. EN ISO 25178-603:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013)
EN ISO 15530-3:2011 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011)
UNI EN ISO 14253-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION
CEI EN 50377-4-4 : 2012 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
I.S. EN 50516-1-1:2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
EN ISO 25178-71:2017 Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017)
ISO 10959:2016 Aerospace MJ threads Gauging
ISO 9270-2:2010 7/24 taper spindle noses for automatic tool changers Part 2: Dimensions and designation of spindle noses of forms J and JF
I.S. EN ISO 12780-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
I.S. EN 50377-8-12:2010 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-12: TYPE LSH-APC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U
I.S. EN ISO 14253-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION
I.S. EN ISO 12180-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS
DIN EN 10243-2 : 2005-07 STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 2: UPSET FORGINGS MADE ON HORIZONTAL FORGING MACHINES
DIN EN 10243-1 : 2007-12 STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 1: DROP AND VERTICAL PRESS FORGINGS
BS EN ISO 9013:2017 Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
ISO 22432:2011 Geometrical product specifications (GPS) — Features utilized in specification and verification
ISO 17450-3:2016 Geometrical product specifications (GPS) General concepts Part 3: Toleranced features
ISO 16610-1:2015 Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts
ISO 25178-603:2013 Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
BS EN ISO 1101:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
ISO 16610-21:2011 Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters
ISO 5436-2:2012 Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards
ISO 1119:2011 Geometrical product specifications (GPS) — Series of conical tapers and taper angles
ISO 14253-5:2015 Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 5: Uncertainty in verification testing of indicating measuring instruments
ISO 1660:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing
ISO 10360-9:2013 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 9: CMMs with multiple probing systems
ISO 18391:2016 Geometrical product specifications (GPS) Population specification
ISO 2692:2014 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 128-1:2003 Technical drawings General principles of presentation Part 1: Introduction and index
ISO 12781-2:2011 Geometrical product specifications (GPS) Flatness Part 2: Specification operators
BS EN 20286-1:1993 ISO system of limits and fits ISO system of limits and fits. Bases of tolerances, deviations and fits
BS EN 10243-2:1999 Steel die forgings. Tolerances on dimensions Upset forgings made on horizontal forging machines
ISO 16610-30:2015 Geometrical product specifications (GPS) Filtration Part 30: Robust profile filters: Basic concepts
ISO 25178-3:2012 Geometrical product specifications (GPS) — Surface texture: Areal — Part 3: Specification operators
ISO 17450-2:2012 Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
ISO 2538-1:2014 Geometrical product specifications (GPS) Wedges Part 1: Series of angles and slopes
BS EN 10243-1:1999 Steel die forgings. Tolerances on dimensions Drop and vertical press forgings
ISO 14253-3:2011 Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements
IEC 61754-15:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH connector family
ISO 3040:2016 Geometrical product specifications (GPS) Dimensioning and tolerancing Cones
ISO 13920:1996 Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position
ISO 1938-1:2015 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
ISO 16610-22:2015 Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters
ISO 2768-2:1989 General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
IEC 62664-1-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre
ISO 25178-604:2013 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
ISO 25178-1:2016 Geometrical product specifications (GPS) Surface texture: Areal Part 1: Indication of surface texture
ISO 13385-1:2011 Geometrical product specifications (GPS) Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics
IEC 61754-32:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 32: Type DiaLink connector family
ISO 12180-1:2011 Geometrical product specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form
ISO 13102:2012 Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digital-indicator gauge — Design and metrological characteristics
ISO 14638:2015 Geometrical product specifications (GPS) Matrix model
ISO 12181-1:2011 Geometrical product specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness
ISO 17450-1:2011 Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification
ISO 14405-3:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
UNE-EN ISO 13385-1:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
ISO 2768-1:1989 General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
ISO 9013:2017 Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances
ISO 13385-2:2011 Geometrical product specifications (GPS) Dimensional measuring equipment Part 2: Calliper depth gauges; Design and metrological characteristics
ISO 16610-85:2013 Geometrical product specifications (GPS) — Filtration — Part 85: Morphological areal filters: Segmentation
ISO 2538-2:2014 Geometrical product specifications (GPS) Wedges Part 2: Dimensioning and tolerancing
BS EN ISO 13920:1997 Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position
BS EN ISO 1660:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing
ISO 16610-41:2015 Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters
IEC 61754-34:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 34: Type URM connector family
ISO 16610-31:2016 Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters
BS EN 22768-1:1993 General tolerances Tolerances for linear and angular dimensions without individual tolerance indications
ISO 16610-71:2014 Geometrical product specifications (GPS) — Filtration — Part 71: Robust areal filters: Gaussian regression filters
ISO 12780-1:2011 Geometrical product specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness
ISO 25178-606:2015 Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments
ISO 4759-1:2000 Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
EN 50377-8-12:2010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-12: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U
EN ISO 16610-1:2015 Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015)
EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015)
EN ISO 5436-2:2012 Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
EN ISO 25178-1:2016 Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016)
EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
EN ISO 13920:1996 Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position (ISO 13920:1996)
EN 22768-1:1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
EN ISO 16610-30:2017 Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts (ISO 16610-30:2015)
EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
EN ISO 16610-85:2013 Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013)
EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
EN ISO 25178-3:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
EN ISO 13385-1:2011 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011)
EN ISO 16610-21:2012 Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011)
EN ISO 25178-70 : 2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
EN ISO 16610-22:2015 Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO 16610-22:2015)
EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
EN ISO 1119:2011 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
EN ISO 17450-3:2016 Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
EN ISO 16610-41:2015 Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)
EN ISO 2538-1:2014 Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
EN ISO 13225:2012 Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012)
EN ISO 22432:2011 Geometrical product specifications (GPS) - Features utilized in specification and verification (ISO 22432:2011)
EN ISO 8062-3 : 2007 COR 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
EN ISO 17450-2:2012 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
EN ISO 10360-9:2013 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013)
EN ISO 25178-603:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013)
EN ISO 1938-1:2015 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
EN ISO 10303-210:2002 Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnection, and packaging design (ISO 10303-210:2001)
EN ISO 2538-2:2014 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014)
EN ISO 10360-8 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013)
EN ISO 16610-31:2016 Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
EN ISO 10135:2009 Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
EN ISO 1938-2:2017 Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017)
EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
EN ISO 18391:2016 Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013)
EN ISO 16610-71:2014 Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014)
DIN EN ISO 1938-2 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
DIN EN ISO 16610-1 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
DIN EN ISO 14405-3:2013-08 (Draft) GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016)
UNE-EN ISO 13102:2013 Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012)
UNI EN ISO 12181-1 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS
DIN EN ISO 25178-604:2013-12 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013)
I.S. EN 186220:1994 CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE LSC (SECTIONAL SPECIFICATION)
DIN ISO 7388-3 E : 2015 TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 3: RETENTION KNOBS FOR SHANKS OF FORMS AC, AD, AF, UC, UD, UF, JD AND JF (ISO 7388-3:2013)
BS ISO 2692:1988 Technical drawings. Geometrical tolerancing. Maximum material principle
DIN EN ISO 16610-41 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015)
BS EN ISO 25178-1:2016 Geometrical product specifications (GPS). Surface texture: Areal Indication of surface texture
BS EN ISO 16610-22:2015 Geometrical product specifications (GPS). Filtration Linear profile filters: Spline filters
BS ISO 7388-2:2007 Tool shanks with 7/24 taper for automatic tool changers Dimensions and designation of shanks of forms J, JD and JF
ISO/TR 16570:2004 Geometrical Product Specifications (GPS) Linear and angular dimensioning and tolerancing: +/- limit specifications Step dimensions, distances, angular sizes and radii
I.S. EN ISO 16610-22:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015)
I.S. EN 50377-8-13:2010 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 8-13: TYPE LSH-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE WITH TITANIUM COMPOSITE FERRULE FOR CATEGORY U
DIN EN ISO 1938-2:2017-05 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017)
BS EN ISO 17450-1:2011 Geometrical product specifications (GPS). General concepts Model for geometrical specification and verification
BS EN ISO 12180-2:2011 Geometrical product specifications (GPS). Cylindricity Specification operators
DIN EN ISO 12181-2:2011-07 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
DIN EN ISO 16610-71 E : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-71:2014)
EN ISO 17450-4:2018 Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
BS EN 50377-2-2:2009 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications FC/APC 8 terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule, category C
DIN EN 12101-7:2011-08 Smoke and heat control systems - Part 7: Smoke duct sections
13/30272933 DC : 0 BS EN ISO 14405-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES
BS EN ISO 16610-1:2015 Geometrical product specifications (GPS). Filtration Overview and basic concepts
BS EN ISO 16610-31:2016 Geometrical product specifications (GPS). Filtration Robust profile filters: Gaussian regression filters
BS EN ISO 1938-1:2015 Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size
DIN EN ISO 17450-2:2013-04 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
DIN EN ISO 17450-1:2012-04 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
12/30258651 DC : 0 BS ISO 492 - ROLLING BEARINGS - RADIAL BEARINGS - DIMENSIONAL AND GEOMETRICAL TOLERANCES
IS 2102 : Part 1 : 1993(R2014) General tolerances Part 1 Tolerances for linear and angular dimensions without individual tolerance indications (Third Revision)
BS ISO 7388-1:2007 Tool shanks with 7/24 taper for automatic tool changers Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
BS EN ISO 16610-21:2012 Geometrical product specifications (GPS). Filtration Linear profile filters: Gaussian filters
BS EN ISO 5459:2011 Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
DIN EN ISO 16610-31:2015-09 (Draft) GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)
DIN 18250:2006-09 LOCKS - MORTISE LOCKS FOR FIRE DOORS AND SMOKE CONTROL DOORS
DIN ISO 5458:1988-07 TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
DIN EN ISO 13385-2:2013-06 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011)
DIN EN ISO 10360-8:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013)
DIN EN ISO 16610-1:2015-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
BS EN 186220:1996 Harmonized system of quality assessment for electronic components. Sectional specification: Connector sets for optical fibres and cables. Type LSC
DIN EN ISO 25178-3:2012-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012); German version EN ISO 25178-3:2012
BS ISO 3245:2015 Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values
BIS IS 2102-2 : 1993(R2014) GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
CEI EN 61754-28 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 28: TYPE LF3 CONNECTOR FAMILY
BS ISO 10889-4:2016 Tool holders with cylindrical shank Type C with rectangular axial seat
UNI EN 12101-7 : 2011 SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS
ISO 14253-2:2011 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
BS ISO 12297-2:2018 Rolling bearings. Cylindrical rollers Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
BS EN ISO 13385-1:2011 Geometrical product specifications (GPS). Dimensional measuring equipment Callipers; Design and metrological characteristics
I.S. EN ISO 25178-606:2015 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS (ISO 25178-606:2015)
I.S. EN ISO 1938-1:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015)
UNE-EN ISO 14253-2:2012 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011)
ISO 15530-3:2011 Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards
UNI EN ISO 14405-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
I.S. EN ISO 14405-3:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO/DIS 14405-3:2013)
UNI EN ISO 13385-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS
I.S. EN ISO 12181-1:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS
I.S. EN 50377-4-4:2011 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-4: TYPE SC-PC SIMPLEX TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE, WITH FULL ZIRCONIA FERRULE CATEGORY U
ISO 15872:2017 Aerospace — UNJ threads — Gauging
BS EN ISO 25178-71:2017 Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards
ISO/TS 21619:2018 Geometrical product specifications (GPS) Types of documents with GPS
ISO 21927-7:2017 Smoke and heat control systems — Part 7: Smoke ducts sections
UNI EN ISO 25178-603 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS
I.S. EN ISO 18391:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - POPULATION SPECIFICATION (ISO 18391:2016)
UNI EN ISO 16610-85 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION
I.S. EN ISO 14253-5:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 5: UNCERTAINTY IN VERIFICATION TESTING OF INDICATING MEASURING INSTRUMENTS (ISO 14253-5:2015)
NF EN ISO 14405-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
ISO 16610-61:2015 Geometrical product specification (GPS) — Filtration — Part 61: Linear areal filters — Gaussian filters
ISO 1206:2018 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
ISO 10303-214:2010 Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes
ISO 10889-4:2016 Tool holders with cylindrical shank Part 4: Type C with rectangular axial seat
ISO 3601-2:2016 Fluid power systems — O-rings — Part 2: Housing dimensions for general applications
ISO 10889-3:2016 Tool holders with cylindrical shank Part 3: Type B with rectangular radial seat
EN 50516-1-1:2011/AC:2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
CEN ISO/TS 8062-2 : 2013 COR 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
DIN EN ISO 1119:2012-04 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
DIN EN ISO 4759-1 E : 2001 TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C
BS EN ISO 4759-1:2001 Tolerances for fasteners Bolts, screws, studs and nuts. Product grades A, B and C
ISO 7388-1:2007 Tool shanks with 7/24 taper for automatic tool changers Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
ISO 12181-2:2011 Geometrical product specifications (GPS) Roundness Part 2: Specification operators
ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
ISO 10360-8:2013 Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 8: CMMs with optical distance sensors
UNE-EN ISO 1119:2012 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)
ISO 1938-2:2017 Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges
ISO/TS 8062-2:2013 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules
ISO 12180-2:2011 Geometrical product specifications (GPS) Cylindricity Part 2: Specification operators
BS EN ISO 1119:2011 Geometrical product specifications (GPS). Series of conical tapers and taper angles
ISO 12780-2:2011 Geometrical product specifications (GPS) Straightness Part 2: Specification operators
ISO 12781-1:2011 Geometrical product specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness
BS EN 20286-2:1993 ISO system of limits and fits ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts
ISO 7388-2:2007 Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF
EN 61754-15:2009/AC:2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 15: TYPE LSH CONNECTOR FAMILY (IEC 61754-15:2009)
EN ISO 12180-2:2011 Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011)
EN ISO 12180-1:2011 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011)
EN ISO 17450-1:2011 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
EN ISO 12781-1:2011 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011)
EN 62664-1-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre
EN 50377-8-11:2010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-11: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
EN 186130:1994 Sectional Specification: Connector sets for optical fibres and cables - Type LSA
DIN EN ISO 14405-3:2017-07 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016)
DIN EN ISO 5436-2:2013-04 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012)
DIN EN 10243-1:2000-06 STEEL DIE FORGINGS - TOLERANCES ON DIMENSIONS - PART 1: DROP AND VERTICAL PRESS FORGINGS
EN ISO 12781-2:2011 Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011)
EN 50377-4-4:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
CEN ISO/TS 15530-1:2013 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013)
EN ISO 12181-2 : 2011 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
EN 50377-8-13:2010 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-13: Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U
EN 61754-28:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 28: Type LF3 connector family
EN 50516-3-1:2014 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
DIN EN 10243-2:2000-06 Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines; German version EN 10243-2:1999
DIN EN ISO 16610-31:2017-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)

ISO/TR 14638:1995 Geometrical product specification (GPS) Masterplan
ISO/TS 17450-2:2002 Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties
ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
ISO 2692:2014 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
ISO 14978:2006 Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment
ISO 1:2016 Geometrical product specifications (GPS) Standard reference temperature for the specification of geometrical and dimensional properties
ISO 14253-1:2017 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
ISO/TS 17450-1:2005 Geometrical product specifications (GPS) General concepts Part 1: Model for geometrical specification and verification
ISO 14405-1:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
ISO 14253-2:2011 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 13715:2017 Technical product documentation Edges of undefined shape Indication and dimensioning
ISO 7200:2004 Technical product documentation Data fields in title blocks and document headers
ISO 10579:2010 Geometrical product specifications (GPS) Dimensioning and tolerancing Non-rigid parts
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.