• There are no items in your cart

ISO 80369-7:2016

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Small-bore connectors for liquids and gases in healthcare applications Part 7: Connectors for intravascular or hypodermic applications
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

05-14-2021

Language(s)

French, English

Published date

10-14-2016

ISO 80369-7:2016 specifies dimensions and requirements for the design and functional performance of small-bore connectors intended to be used for connections in intravascular applications or hypodermic connections in hypodermic applications of medical devices and accessories.

EXAMPLES Hypodermic syringes and needles or intravascular (IV) cannulae with male and female luer slip connectors and luer lock connectors.

NOTE 1 The luer connector was originally designed for use at pressures up to 300 kPa.

ISO 80369-7:2016 does not specify requirements for the medical devices or accessories that use these connectors. Such requirements are given in particular International Standards for specific medical devices or accessories.

ISO 80369-7:2016 does not specify requirements for the following small-bore connectors, which are specified in other International Standards:

- haemodialyser, haemodiafilter and haemofilter blood compartment ports (ISO 8637 and applicable portion of ISO 8638 referencing blood compartment ports);

- haemodialysis, haemodiafiltration and haemofiltration equipment connectors (ISO 8637);

- infusion system closure piercing connectors (ISO 85364).

NOTE 2 Manufacturers are encouraged to incorporate the small-bore connectors specified in this part of ISO 80369 into medical devices or accessories, even if currently not required by the relevant particular medical device standards. It is expected that when the relevant particular medical device standards are revised, requirements for small-bore connectors, as specified in ISO 80369, will be included.

NOTE 3 ISO 803691:2010, 5.8, specifies alternative methods of compliance with ISO 803691:2010, for small-bore connectors intended for use with intravascular applications or hypodermic application medical devices or accessories, which do not comply with this part of ISO 80369.

DevelopmentNote
Supersedes ISO/DIS 80369-7, ISO 594-1 & ISO 594-2. (10/2016)
DocumentType
Standard
Pages
47
ProductNote
This standard has Corrected version (en) : 2016-12 , Corrected version (fr) : 2016-12
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

BS ISO 11040-6:2012 Prefilled syringes Plastic barrels for injectables
17/30346437 DC : 0 BS ISO 18250-7 - CONNECTORS FOR RESERVOIR DELIVERY SYSTEMS FOR HEALTHCARE APPLICATIONS - PART 7: CONNECTORS FOR INTRAVASCULAR INFUSION
I.S. EN ISO 10555-6:2017 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015)
I.S. EN ISO 10555-1:2013 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017)
UNE-EN ISO 80369-6:2016 Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neuraxial applications (ISO 80369-6:2016, Corrected version 2016-11-15)
EN ISO 5366:2016 Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors (ISO 5366:2016)
17/30338753 DC : 0 BS ISO 80601-2-79 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-79: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF VENTILATORY SUPPORT EQUIPMENT FOR VENTILATORY IMPAIRMENT
ISO 80369-6:2016 Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications
17/30357741 DC : 0 BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING
DIN EN ISO 8836 E : 2015 SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014)
DIN ISO 11040-4 E : 2017 PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
DIN EN ISO 8836:2015-02 Suction catheters for use in the respiratory tract (ISO 8836:2014); German version EN ISO 8836:2014
ISO 8637-1:2017 Extracorporeal systems for blood purification — Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
AAMI ISO 8836 : 2015 SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
ISO 11040-8:2016 Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes
ISO 8836:2014 Suction catheters for use in the respiratory tract
DIN EN ISO 5366:2017-04 Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors (ISO 5366:2016); German version EN ISO 5366:2016
DIN EN ISO 5366:2015-10 (Draft) ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES AND CONNECTORS (ISO 5366:2016)
DIN EN ISO 25539-1:2015-07 (Draft) CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017)
BS ISO 18190:2016 Anaesthetic and respiratory equipment. General requirements for airways and related equipment
EN ISO 10555-1:2013/A1:2017 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017)
ISO 10555-4:2013 Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters
ANSI/AAMI/ISO 80369-3:2016 SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 3: CONNECTORS FOR ENTERAL APPLICATIONS
17/30338756 DC : 0 BS ISO 80601-2-80 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-80: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF VENTILATORY SUPPORT EQUIPMENT FOR VENTILATORY INSUFFICIENCY
DIN EN ISO 5366 E : 2017 ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES AND CONNECTORS (ISO 5366:2016)
UNE-EN ISO 80369-3:2017 Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016)
BS EN ISO 5366:2016 Anaesthetic and respiratory equipment. Tracheostomy tubes and connectors
I.S. EN ISO 7886-1:1998 STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 1: SYRINGES FOR MANUAL USE (ISO 7886-1:2017)
UNE-EN ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2016)
UNE-EN ISO 7864:2017 Sterile hypodermic needles for single use - Requirements and test methods (ISO 7864:2016)
BS EN 30-1-2:2012 Domestic cooking appliances burning gas. Safety Appliances having forced-convection ovens and/or grills
EN 30-1-2:2012 Domestic cooking appliances burning gas - Safety - Part 1-2: Appliances having forced-convection ovens and/or grills
ISO 11040-6:2012 Prefilled syringes Part 6: Plastic barrels for injectables
DIN ISO 11040-4:2007-10 PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)
EN ISO 10555-6:2017 Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports (ISO 10555-6:2015)
CEI UNI EN ISO 80369-3 : 2017 SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 3: CONNECTORS FOR ENTERAL APPLICATIONS
ISO 18190:2016 Anaesthetic and respiratory equipment — General requirements for airways and related equipment
UNE-EN ISO 5366:2017 Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors (ISO 5366:2016)
ISO 7886-1:2017 Sterile hypodermic syringes for single use — Part 1: Syringes for manual use
DIN EN ISO 25539-1:2017-09 CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017)
DIN ISO 11040-4:2017-07 PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015)

ISO 11040-4:2015 Prefilled syringes Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin
ISO 80369-20:2015 Small-bore connectors for liquids and gases in healthcare applications Part 20: Common test methods
ISO 8638:2010 Cardiovascular implants and extracorporeal systems Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters
ISO 5356-1:2015 Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets
ISO 16142-1:2016 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
ISO 10241-2:2012 Terminological entries in standards — Part 2: Adoption of standardized terminological entries
ISO 3040:2016 Geometrical product specifications (GPS) Dimensioning and tolerancing Cones
ISO 5356-2:2012 Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO 8185:2007 Respiratory tract humidifiers for medical use Particular requirements for respiratory humidification systems
ISO 80369-6:2016 Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications
ASTM D 790 : 2017 : REDLINE Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ISO 8536-4:2010 Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed
ISO 80369-1:2010 Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements
ISO 10241-1:2011 Terminological entries in standards — Part 1: General requirements and examples of presentation
ISO 14971:2007 Medical devices Application of risk management to medical devices
ISO 178:2010 Plastics Determination of flexural properties
ISO 594-1:1986 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements
ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.