• There are no items in your cart

ISO 868:2003

Current
Current

The latest, up-to-date edition.

Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
Available format(s)

PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

04-14-2003

ISO 868:2003 specifies a method for the determination of the indentation hardness of plastics and ebonite by means of durometers of two types: type A is used for softer materials and type D for harder materials. The method permits measurement either of the initial indentation or of the indentation after a specified period of time, or both.

This method is an empirical method intended primarily for control purposes. No simple relationship exists between indentation hardness determined by this method and any fundamental property of the material tested. For specification purposes, it is recommended that ISO 48, Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD), be used for the softer materials.

Committee
ISO/TC 61/SC 2
DevelopmentNote
Supersedes ISO/DIS 868 (04/2003)
DocumentType
Standard
Pages
5
PublisherName
International Organization for Standardization
Status
Current
Supersedes

SAE MS 1003 : 2018 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION
DIN EN 10245-5:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
DIN EN ISO 21509 E : 2015 PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS (ISO 21509:2006)
BS EN 62444:2013 Cable glands for electrical installations
UNE-EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
UNE-EN 16261-3:2014 Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
UNE-EN 50290-2-29:2016 Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables
I.S. EN 62790:2015 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
06/30153650 DC : DRAFT JULY 2006 EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
I.S. EN 10329:2006 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
09/30201918 DC : 0 BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS
BS EN 15651-2:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for glazing
UNE-EN 50290-2-33:2016 Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable)
07/30160665 DC : 0 BS EN 12790 - CHILD USE AND CARE ARTICLES - RECLINED CRADLES
DIN EN 16265:2016-05 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES
12/30212874 DC : 0 BS EN ISO 6808 - PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION
13/30240164 DC : 0 BS ISO 16365-1 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
DIN EN 16805 E : 2016 DIVING EQUIPMENT - DIVING MASK - REQUIREMENTS AND TEST METHODS
I.S. EN 14035-35:2004 FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
I.S. EN ISO 21809-3:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
BS 5664-2.1(1979) : 1979 SOLVENTLESS POLYMERISABLE RESINOUS COMPOUNDS USED FOR ELECTRICAL INSULATION - METHODS OF TEST
I.S. EN 14483-4:2004 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL
CEI EN 50290-2-25 : 2014 COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS
BS ISO 10931-1:1997 Plastics piping systems for industrial applications. Poly (vinylidene fluoride) General
BS ISO 20753 : 2008 PLASTICS - TEST SPECIMENS
14/30313364 DC : 0 BS ISO 19861 - BUILDINGS AND CIVIL ENGINEERING WORKS SEALANTS - DETERMINATION OF CURING BEHAVIOR
I.S. EN ISO 21509:2015 PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS (ISO 21509:2006)
DIN EN ISO 21509:2015-10 PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS (ISO 21509:2006)
PREN 1504-2 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
IEC 60544-4:2003 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments
SAE MS 1002 : 2017 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE C (GEARS) SPECIFICATION
VDE 0212-2 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
DD CEN/TS 15185:2005 Furniture. Assessment of the surface resistance to abrasion
BS 903-A57:1989 Physical testing of rubber Determination of indentation hardness by means of pocket hardness meters
DIN EN 16263-4:2015-11 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS
00/560662 DC : DRAFT JAN 2000 PREN 13832 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS
CEI EN 50290-2-29 : 2002 COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES
DIN EN 13832-2:2006-11 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
NFC 33 009-2 : 2008 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
PD EN 14035-8:2004 Fireworks Bengal sticks. Specification and test methods
BS ISO 19861:2015 Buildings and civil engineering works. Sealants. Determination of curing behaviour
BS IEC 62790 : 2014 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
I.S. EN 1466:2014 CHILD USE AND CARE ARTICLES - CARRY COTS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN ISO 28706-4:2016-07 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL (ISO 28706-4:2016)
DIN EN 16256-5:2013-03 PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS
05/30137738 DC : DRAFT AUG 2005 ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS
S.R. CEN/TS 16165:2016 DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION
SAE MS 1000 : 2013 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION
I.S. EN 61076-7-100:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
UNE-EN ISO 21509:2016 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)
BS ISO 13628-10 : 2005 AMD 16775 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE
CEI EN 61076-7-100 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
CEI EN 60544-2 : 2013 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST
CEI EN 50290-2-33 : 1ED 2017 COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION COMPOUNDS FOR MULTI ELEMENT METALLIC CABLES FOR INDOOR INSTALLATION (DATA CABLE)
DIN EN 15655:2016-07 (Draft) DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
DIN EN 13832-3:2006-11 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
DIN EN 124-1 E : 2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS
I.S. EN 61215-2:2017 TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 2: TEST PROCEDURES
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
I.S. CEN TS 15185:2006 FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION
I.S. EN 60684-3-214:2014 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, NOT FLAME RETARDED, THICK AND MEDIUM WALL
I.S. EN 50290-2-35:2016 COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND
BS EN 50290-2-21 : 2002 COMMUNICATION CABLES - PART 2-21: COMMON DESIGN RULES AND CONSTRUCTION - PVC INSULATION COMPOUNDS
I.S. EN 62631-3-1:2016 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-1: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - VOLUME RESISTANCE AND VOLUME RESISTIVITY - GENERAL METHOD
I.S. EN 15651-4:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
BS EN 50548 : 2011 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
ISO 28278-1:2011 Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing
CEI EN 60684-3-247 : 2012 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL
I.S. EN 14035-5:2006 FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS
I.S. HD 631.2:2007 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
ISO 16365-1:2014 Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 1: Designation system and basis for specifications
HD 631.2 : 2007 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
I.S. EN 50548:2011 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
DIN EN ISO 20753 E : 2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
17/30359554 DC : 0 BS EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS
I.S. EN 50655-1:2017 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
16/30347811 DC : 0 BS EN 14187-5 - COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS
UNE-EN 15651-4:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
ISO/TS 11819-3:2017 Acoustics Measurement of the influence of road surfaces on traffic noise Part 3: Reference tyres
I.S. EN 50290-2-23:2013 COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
ISO 21809-1:2011 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
DIN EN ISO 20753:2014-07 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
DIN EN 71-4:2013-05 Safety of toys - Part 4: Experimental sets for chemistry and related activities
DIN EN 1504-2:2015-03 (Draft) PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
BS EN 14879-2:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
BS EN 12259-3:2000 Fixed firefighting systems. Components for sprinkler and water spray systems Dry alarm valve assemblies
BS EN 14035-6:2004 Fireworks Bengal flames. Specification and test methods
BS EN 14035-35:2004 Fireworks Throwdowns. Specification and test methods
IEC 60684-3-247:2011+AMD1:2016 CSV Flexible insulating sleeving - Part 3 Specifications for individual types of sleeving - Sheet 247: Heatshrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
BS EN 295-3:2012 Vitrified clay pipe systems for drains and sewers Test methods
BS EN 13893:2002 Resilient, laminate and textile floor coverings. Measurement of dynamic coefficient of friction on dry floor surfaces
BS EN 14879-5:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components
DIN EN 14035-35:2005-02 FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
DIN EN ISO 6808:2000-11 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014)
DIN EN 14782:2006-03 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
ONORM EN ISO 13000-2 : 2006 PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEN/TS 16354:2013 Laminate floor coverings - Underlays - Specification, requirements and test methods
EN ISO 20344:2011 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
DIN ISO 5355:2006-05 ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS
EN 12961:2001/A1:2005 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF OPTIMUM ACTIVATION TEMPERATURES AND MAXIMUM ACTIVATION LIFE OF SOLVENT-BASED AND DISPERSION ADHESIVES
EN 61076-7-100 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
DIN ISO 6265:2013-09 ALPINE SKIS - DETERMINATION OF DEFORMATION LOAD AND BREAKING LOAD (ISO 6265:2013)
EN 62444 : 2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED)
EN 50290-2-37:2016 Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables
EN 50290-2-22 : 2001 AMD 1 2007 COMMUNICATION CABLES - PART 2-22: COMMON DESIGN RULES AND CONSTRUCTION - PVC SHEATHING COMPOUNDS
EN 10245-1:2011 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
DIN EN 15062:2006-08 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions
DIN EN 14879-4:2008-01 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
CEN/TS 15185 : 2005 FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION
EN 50290-2-29:2016 Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables
EN 13036-3:2002 Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability
EN 10245-2:2011 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
DIN EN 14879-2:2007-02 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
EN 50655-1:2017 Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds
EN 10245-5:2011 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
EN 12488:2016 Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing
EN 12259-3:2000/A2:2005 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 3: DRY ALARM VALVE ASSEMBLIES
EN 50290-2-25:2013 COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS
EN 12790:2009 Child use and care articles - Reclined cradles
EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
DIN EN 15189:2007-02 Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
ONORM EN ISO 23936-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
I.S. EN 14865-2:2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
EN 50368:2003 Cable cleats for electrical installations
ONORM EN 12790 : 2009 CHILD USE AND CARE ARTICLES - RECLINED CRADLES
DIN EN 13696:2009-02 WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE
DIN EN 14035-10:2004-11 FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS
UNE-EN 50290-2-23:2014 Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
BS EN 61854:1998 Overhead lines. Requirements and tests for spacers
BS ISO 21509 : 2006 PLASTICS AND EBONITE - VERIFICATION OF SHORE DUROMETERS
I.S. EN 15651-2:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
BS EN 16805:2015 Diving equipment. Diving mask. Requirements and test methods
07/30149374 DC : 0 BS EN 15673-1 - DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHOD OF EVALUATION - PART 1: REFERENCE METHOD
DIN EN 14035-31:2006-01 FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS
18/30363862 DC BS ISO 8124-10. Safety of toys Part 10. Experimental sets for chemistry and related activities
07/30161895 DC : 0 BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN 60544-4:2003 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS
14/30300605 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
CEI EN 62217 : 2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
BS EN 50290-2-23:2013 Communication cables Common design rules and construction. Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
BS EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Requirement for bushing components
PD EN 14035-3:2004 Fireworks Aerial wheels. Specification and test methods
ASTM F 2870 : 2016 : REDLINE Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
I.S. EN 16523-1:2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
BS EN ISO 25649-1:2017 Floating leisure articles for use on and in the water Classification, materials, general requirements and test methods
DIN EN 15651-3:2016-10 (Draft) SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS
CEI EN 50290-2-35 : 1ED 2017 COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND
BS EN 10245-5:2011 Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire
I.S. EN 62444:2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010 (MOD))
BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness Durometer method (Shore hardness)
PREN 62444 : DRAFT 2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED)
I.S. EN 50180-2:2015 BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS
BS EN 62631-3-1:2016 Dielectric and resistive properties of solid insulating materials Determination of resistive properties (DC methods). Volume resistance and volume resistivity. General method
DIN EN 15651-1:2016-10 (Draft) SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS
98/123516 DC : DRAFT JULY 1998 PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS
BS EN 61076-7-100:2006 Connectors for electronic equipment. Product requirements Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
DIN EN 16264:2014-11 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS
NF EN ISO 23936-1 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
UNI EN 15655 : 2009 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
DIN EN 15655 E : 2009 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
PREN 50655-1 : DRAFT 2015 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
09/30200146 DC : 0 BS EN ISO 20344 - PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR
17/30365113 DC : 0 BS EN 60455-3-8 ED.2.0 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
DIN EN 16028:2012-10 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
BS ISO 11393-5:2001 Protective clothing for users of hand-held chain-saws Test methods and performance requirements for protective gaiters
BS ISO 17194:2007 Structural adhesives. A standard database of properties
DIN EN 15651-4:2016-10 (Draft) SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
15/30297361 DC BS ISO 26261-3. Fireworks. Category 4. Part 3. Test methods
PD EN 14035-13:2004 Fireworks Flash pellets. Specification and test methods
BS EN 15551:2017 Railway applications. Railway rolling stock. Buffers
I.S. EN 14035-31:2005 FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS
BS 2782-3 Method 365C:1986 Methods of testing plastics. Mechanical properties Determination of Rockwell hardness
ISO 20753:2008 Plastics Test specimens
UNE-EN 50290-2-25:2014 Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds
BS ISO 22498:2005 Plastics. Vinyl chloride homopolymer and copolymer resins. Particle size determination by mechanical sieving
05/30131064 DC : DRAFT MAR 2005 EN 15189:2005 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
I.S. EN 50290-2-29:2016 COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES
16/30340626 DC : 0 BS EN 15655 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
03/319405 DC : DRAFT NOV 2003 BS EN 14035-37 - FIREWORKS - PART 37: WHISTLERS - SPECIFICATION AND TEST METHODS
DIN ISO 9838:2016-08 ALPINE AND TOURING SKI-BINDINGS - TEST SOLES FOR SKI-BINDING TESTS (ISO 9838:2015)
S.R. CWA 15756:2007 HUMANITARIAN MINE ACTION (HMA) - PERSONAL PROTECTIVE EQUIPMENT (PPE) - TEST AND EVALUATION
BS ISO 14910-2 : 1997 AMD 16024 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 71-13:2014-07 Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games
UNI CEN ISO/TS 24817 : 2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
BS EN 15651-3:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for sanitary joints
BS EN 50655-1:2017 Electric cables. Accessories. Material characterization Fingerprinting for resinous compounds
I.S. EN 50290-2-37:2016 COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
UNE-EN 16264:2015 Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools
UNI EN 71-4 : 2013 SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
ISO 20029-2:2017 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
CEI EN 50290-2-37 : 1ED 2017 COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
CEI EN 61854 : 2000 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
I.S. EN 50262:1999 METRIC CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
I.S. EN 124-1:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS
ANSI/AAMI/ISO 15676:2016 CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO)
ISO 9838:2015 Alpine and touring ski-bindings Test soles for ski-binding tests
I.S. EN 50290-2-33:2016 COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION COMPOUNDS FOR MULTI ELEMENT METALLIC CABLES FOR INDOOR INSTALLATION (DATA CABLE)
EN 13832-1:2006 Footwear protecting against chemicals - Part 1: Terminology and test methods
CEI EN 60455-3-8 : 2014 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
DIN EN 16523-2 E : 2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
CEI EN 50290-2-38 : 1ED 2017 COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION FOR COAXIAL CABLES
I.S. EN 12488:2016 GLASS IN BUILDING - GLAZING RECOMMENDATIONS - ASSEMBLY PRINCIPLES FOR VERTICAL AND SLOPING GLAZING
PREN 16354 : DRAFT 2016 LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
BS EN 1466:2014 Child use and care articles. Carry cots and stands. Safety requirements and test methods
BS EN 15947-4 : 2016 PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS
16/30333219 DC : 0 BS EN 16354 - LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
EN 16523-2:2015 Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact
PREN 1466 : DRAFT 2013 CHILD USE AND CARE ARTICLES - CARRY COTS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS
SAE MS 1005 : 2017 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION
I.S. EN ISO 12736:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014)
I.S. EN 16028:2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
CEI EN 62444 : 2014 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
ASTM D 4000 : 2016 : REDLINE Standard Classification System for Specifying Plastic Materials
EN 13832-2:2006 Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
ASTM D 5963 : 2004 : R2010 : EDT 1 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications
IEC 62899-201:2016 Printed electronics - Part 201: Materials - Substrates
DIN EN 14879-4 E : 2008 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 4: LININGS ON METALLIC COMPONENTS
DIN EN 1392:2006-08 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions
DIN EN 14879-5 E : 2007 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 5: LININGS ON CONCRETE COMPONENTS
DIN EN 15434 E : 2010 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
DIN EN 15346 E : 2015 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
DIN EN 14294:2010-06 Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes
DIN EN 14782:2015-09 (Draft) SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 14354:2005-03 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
ISO/TS 24817:2006 Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection
BS EN 295-4:2013 Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings
BS EN ISO 20344:2011 Personal protective equipment. Test methods for footwear
UNE-EN ISO 20344:2012 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
BS EN 12790:2009 Child use and care articles. Reclined cradles
EN 61854:1998 Overhead lines - Requirements and tests for spacers
BS EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements
BS EN 15307:2014 Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements
BS EN 71-4:2013 Safety of toys Experimental sets for chemistry and related activities
I.S. EN 15346:2014 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
DIN EN 14035-24:2004-11 FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
I.S. EN ISO 13000-2:2006 PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN ISO 9523:2016-05 TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS (ISO 9523:2015)
I.S. EN 12790:2009 CHILD USE AND CARE ARTICLES - RECLINED CRADLES
I.S. EN 10245-2:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
I.S. EN 71-4:2013 SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
DIN EN 14035-25:2006-01 FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS
DIN EN 14035-28:2004-11 FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS
I.S. EN ISO 20344:2011 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011)
I.S. EN 10245-1:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
DIN EN 14035-22:2004-11 FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS
DIN EN 14035-8:2004-11 FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS
DIN EN 14035-7:2004-11 FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS
ONORM ISO 5355 : 2006 ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS
I.S. EN 10245-4:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
I.S. EN 295-3:2012 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS
DIN EN 14035-6:2004-11 FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS
I.S. EN 1392:2006 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS
I.S. EN ISO 2898-2:2008 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 14035-9:2004-11 FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS
DIN EN 14035-5:2006-05 FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS
I.S. EN 15307:2014 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS
EN 71-4:2013 Safety of toys - Part 4: Experimental sets for chemistry and related activities
DIN EN 14035-3:2004-11 FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS
I.S. EN 14354:2017 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
ONORM EN 71-4 : 2013 SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
I.S. EN 15468:2016 LAMINATE FLOOR COVERINGS - ELEMENTS WITH DIRECTLY APPLIED PRINTING AND RESIN SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 14294:2010 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES
I.S. EN 295-4:2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
DIN EN 13832-1:2006-11 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
I.S. EN ISO 6808:2014 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014)
I.S. EN 15434:2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
DIN EN 14035-38:2006-05 FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS
VDI 3388:2012-03 Materials for trimming and forming dies
BS 3412:1992 Methods of specifying general purpose polyethylene materials for moulding and extrusion
VDI 2083 Blatt 9.2:2017-01 Cleanroom technology - Consumables in the cleanroom
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
VDI/VDE 2616 Blatt 2:2014-07 Hardness testing of plastics and elastomers
BS 7933-1:2007 Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds
OVE/ONORM EN 60455-3-8 : 2014 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013)
UNE-EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
UNE-EN 71-13:2015 Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games
DIN ISO 6265 E : 2013 ALPINE SKIS - DETERMINATION OF DEFORMATION LOAD AND BREAKING LOAD (ISO 6265:2013)
DIN EN 71-13 E : 2014 SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
ISO 9475:1994 Aircraft inner tube and tubeless tyre valves Cores and caps Test methods
BS EN 50617-1:2015 Railway applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system Track circuits
UNI ISO 7619-2 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 2: IRHD POCKET METER METHOD
15/30325650 DC : 0 BS EN 50655-1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
03/319403 DC : DRAFT NOV 2003 BS EN 14035-31 - FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS
I.S. EN ISO 25649-1:2017 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS (ISO 25649-1:2017)
BS EN 50290-2-33:2016 Communication cables Common design rules and construction. Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable)
I.S. EN 14035-25:2005 FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS
BS ISO 6265:2013 Alpine skis. Determination of deformation load and breaking load
13/30281390 DC : 0 BS EN 50290-2-25 - COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS
07/30083514 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
UNE-EN ISO 28706-4:2016 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016)
UNE-EN 15651-1:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
10/30191247 DC : DRAFT APR 2010 BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
BS EN 50290-2-22:2002 Communication cables Common design rules and construction. PVC sheathing compounds
BS EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories
BS EN 62790:2015 Junction boxes for photovoltaic modules. Safety requirements and tests
09/30214460 DC : 0 BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
I.S. EN 16261-3:2012 PYROTECHNIC ARTICLES - FIREWORKS, CATEGORY 4 - PART 3: TEST METHODS
BS EN 16263-4:2015 Pyrotechnic articles. Other pyrotechnic articles Test methods
PD CEN/TR 14548:2003 Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
BS EN 16265:2015 Pyrotechnic articles. Other pyrotechnic articles. Ignition devices
PD EN 14035-21:2005 Fireworks Jumping ground spinners. Specification and test methods
11/30187339 DC : 0 BS EN ISO 12736 - PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES
15/30313584 DC : 0 BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
BS ISO 27668-1:2017 Gel ink ball pens and refills General use
BS EN ISO 28706-4:2016 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
BS EN 60455-2:2015 Resin based reactive compounds used for electrical insulation Methods of test
BS EN 60544-2:2012 Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test
16/30336762 DC : 0 BS EN 50290-2-29 - COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES
13/30282435 DC : 0 BS EN 1466 - CHILD USE AND CARE ARTICLES - CARRY COTS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 61854 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
PREN 14782 : DRAFT 2015 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
12/30265301 DC : 0 BS EN 124-1 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: CLASSIFICATION, COMMON DESIGN, PERFORMANCE AND TESTING REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY
I.S. EN 16523-2:2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
07/30163072 DC : 0 BS EN 15651-1 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 1: SEALANTS FOR FACADE
14/30301841 DC : 0 BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
DIN EN 344-1:1997-06 SAFETY, PROTECTIVE AND OCCUPATIONAL FOOTWEAR FOR PROFESSIONAL USE - PART 1: REQUIREMENTS AND TEST METHODS
15/30324023 DC : 0 BS EN 62677-3-102 ED. 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: MATERIAL REQUIREMENTS - SHEET 102: HEAT-SHRINKABLE, POLYOLEFIN, ANTI-TRACKING MOULDED SHAPES FOR MEDIUM VOLTAGE APPLICATIONS
PREN 14187-5 : DRAFT 2016 COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS
13/30240167 DC : 0 BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 16261-3:2013-03 Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
PREN 13832-2 : DRAFT 2017 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS
BS 7933-1:1998 Electric cables. Accessories. Material characterization Resinous compounds before cure and in the cured state
UNI EN ISO 23936-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
11/30246171 DC : 0 BS EN 71-4 - SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
DIN ISO 5355 E : 2006 ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS
NFC 33 009-1 : 2008 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
BS EN 15649-1 : 2009 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
03/319400 DC : DRAFT NOV 2003 BS EN 14035-21 - FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS
05/30133728 DC : DRAFT MAY 2005 EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
UNE 104244:2011 Waterproofing. Bituminous and bituminous modified materials. Polymer modified tar sheets
BS EN 13832-3:2006 Footwear protecting against chemicals Requirements for footwear highly resistant to chemicals under laboratory conditions
12/30274859 DC : 0 BS ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS
PD CEN/TR 15990:2010 Data sheets. Footwear tests materials and test adhesives
13/30279826 DC : 0 BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
BS EN 50290-2-37:2016 Communication cables Common design rules and construction. Polyethylene insulation for coaxial cables
EN 115-1:2017 Safety of escalators and moving walks - Part 1: Construction and installation
BS EN 50290-2-25:2013 Communication cables Common design rules and construction. Polypropylene insulation compounds
BS EN 344-1:1993 Safety, protective and occupational footwear for professional use Requirements and test methods
04/30091878 DC : DRAFT FEB 2004 BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 16264:2014 Pyrotechnic articles. Other pyrotechnic articles. Cartridges for powder actuated tools
BS EN 62217:2013 Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
14/30293503 DC : 0 BS EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS
91/83289 DC : DRAFT DEC 1991 PREN 3624 - AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION
UNI CEN/TS 16354 : 2014 LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
PREN 13832-1 : DRAFT 2017 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
04/30109201 DC : DRAFT OCT 2004 EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS
04/30122412 DC : DRAFT SEP 2004 ISO 17194 - STRUCTURAL ADHESIVES - STANDARD DATABASE OF PROPERTIES
97/107906 DC : DRAFT DEC 1997 PREN 13022-1 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: ACTIONS, REQUIREMENTS AND TERMINOLOGY
ISO 11659-2:2004 Textile machinery and accessories Machine parts in contact with textile processing oils Part 2: Determination of the impact on polymeric materials
ASTM D 6835 : 2017 : REDLINE Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
BS ISO 2898-2 : 1997 AMD 10727 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PD EN 14035-17:2004 Fireworks Ground spinners. Specification and test methods
BS EN 16028:2012 Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications
13/30293736 DC : 0 BS EN 50290-2-33 - COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI ELEMENT METALLIC DATA CABLES FOR INDOOR APPLICATION
UNE-EN 16805:2016 Diving equipment - Diving mask - Requirements and test methods
SAE AMS 2980/1 : 2014 CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS
I.S. EN ISO 20753:2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
ISO 24817:2017 Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection
UNE-EN 15649-1:2010 Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
CSA C22.2 No. 18.3 : 2012 CONDUIT, TUBING, AND CABLE FITTINGS
C22.2 NO. 18.3-12 (R2017) Conduit, tubing, and cable fittings (Tri-national standard, with ANCE NMX-J-017 and UL 514B)
PREN 71-1 : DRAFT 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
PREN 3624 : 200P1 AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION
HD 631.1 : 200S2 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
I.S. EN 16264:2014 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS
BS 1344-17:1975 Methods of testing vitreous enamel finishes Resistance to hot sodium hydroxide solution
CEN/TR 15990:2010/AC:2010 DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES
I.S. EN 60544-2:2012 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV))
PD EN 14035-4:2003 Fireworks Bangers and banger batteries. Specification and test methods
BS EN 13832-2:2006 Footwear protecting against chemicals Requirements for footwear resistant to chemicals under laboratory conditions
UNI EN 71-1 : 2015 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
I.S. EN 50290-2-38:2016 COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION FOR COAXIAL CABLES
ISO 24338:2014 Laminate floor coverings Determination of abrasion resistance
PREN 50290-2-38 : DRAFT 2013 COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
I.S. EN 60455-2:2015 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
I.S. EN 61854:1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
UNI ISO 7619-1 : 2011 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS)
BS ISO 9838:2015 Alpine and touring ski-bindings. Test soles for ski-binding tests
I.S. EN 14035-21:2005 FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS
I.S. EN 50368:2003 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
DIN EN 15947-4:2016-02 Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
BS EN ISO 24817:2017 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
UNI EN ISO 21809-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
I.S. EN 15651-1:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS
I.S. EN 15551:2017 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
AAMI TIR17 : 2008 COMPATIBILITY OF MATERIALS SUBJECT TO STERILIZATION
PREN 15468 : DRAFT 2013 LAMINATE FLOOR COVERINGS - ELEMENTS WITH DIRECTLY APPLIED PRINTING AND RESIN SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
UNI EN 1466 : 2015 CHILD USE AND CARE ARTICLES - CARRY COTS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS
UNE-EN 50290-2-38:2016 Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables
I.S. EN 14035-33:2005 FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS
AAMI TIR17 : 2017 COMPATIBILITY OF MATERIALS SUBJECT TO STERILIZATION
UNE-EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
ISO 5355:2005 Alpine ski-boots Requirements and test methods
BS EN ISO 20753:2014 Plastics. Test specimens
PREN 15655 : DRAFT 2016 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
EN 16523-1:2015 Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact
ASTM D 5857 : 2017 : REDLINE Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
BS EN 60684-3-247 : 2011 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-247:2011)
ASTM F 2872 : 2016 : REDLINE Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
ASTM D 5963 : 2004 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
EN ISO 20029-2:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)
DIN EN 71-1:2015-02 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
ASTM F 2871 : 2016 : REDLINE Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
ISO 27668-1:2017 Gel ink ball pens and refills — Part 1: General use
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
I.S. EN 15655:2009 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
ISO 17194:2007 Structural adhesives A standard database of properties
DIN EN 12790:2009-07 Child use and care articles - Reclined cradles
DIN EN 14879-2 E : 2007 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS
DIN EN 14879-3 E : 2007 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS
EN ISO 13628-2:2006/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN ISO 6808:2014-10 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014)
DIN EN 15062 E : 2006 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS
DIN EN 295-4:2013-05 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
DIN EN 14782 E : 2006 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 13036-3 E : 2003 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 3: MEASUREMENT OF PAVEMENT SURFACE HORIZONTAL DRAINABILITY
DIN EN 15346:2015-01 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
DIN EN ISO 20344 E : 2013 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011)
BS EN 14035-25:2005 Fireworks Party poppers. Specification and test methods
ISO 9523:2015 Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods
BS EN 1392:2006 Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions
BS EN 13121-1:2003 GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions
ISO 28706-4:2016 Vitreous and porcelain enamels Determination of resistance to chemical corrosion Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
BS EN 10329 : 2005 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
BS EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings
BS EN 14035-22:2004 Fireworks Mines. Specification and test methods
UNE-EN ISO 6808:2015 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014)
BS EN 14035-7:2004 Fireworks Bengal matches. Specification and test methods
BS EN 1504-2:2004 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete
ISO 2898-2:2008 Plastics Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 62217:2012 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
DIN EN 1504-2:2005-01 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004
OVE/ONORM EN 60684-3-214 : 2014 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-214:2013)
DIN EN 1504-7:2006-11 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
EN ISO 21509:2015 Plastics and ebonite - Verification of Shore durometers (ISO 21509:2006)
EN 14354:2017 Wood-based panels - Wood veneer floor coverings
EN 14035-21 : 2005 FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS
EN 14035-20 : 2005 FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS
EN 50262 : 1998 AMD 2 2004 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
UNI EN 16028 : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
UNI EN 15434 : 2010 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
UNI EN 1504-7 : 2007 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION
UNI EN ISO 20344 : 2012 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR
UNI EN 15189 : 2007 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
UNI EN 295-3 : 2012 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS
UNI EN 14865-2 : 2011 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
EN ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014)
UNI EN 10245-1 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
UNI EN 10245-2 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
UNI EN 295-4 : 2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
UNI EN ISO 2898-2 : 2009 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 50290-2-33:2016 Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable)
UNI EN ISO 14910-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
UNI EN ISO 6808 : 2014 PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION
UNI EN 10245-4 : 2011 Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires
UNI EN 12790 : 2009 CHILD USE AND CARE ARTICLES - RECLINED CRADLES
UNI EN 14294 : 2010 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES
UNE-ISO 7619-1:2011 Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
CEI EN 60684-3-214 : 2015 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, NOT FLAME RETARDED, THICK AND MEDIUM WALL
BS EN ISO 20029-2:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
07/30169170 DC : 0 BS ISO 28706-4 - VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL
DIN EN 16028 E : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
DD CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
99/540206 DC : 0 EN 12259-9 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 9: DELUGE VALVES
06/30146128 DC : DRAFT FEB 2006 ISO 9838 - ALPINE AND TOURING SKI-BINDINGS - TEST SOLES FOR SKI-BINDING TESTS
I.S. EN 15062:2006 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS
12/30254141 DC : 0 BS EN 15651-4 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
BS EN ISO 12736:2014 Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
BS EN 60544-4:2003 Electrical insulating materials. Determination of the effects of ionizing radiation Classification system for service in radiation environments
BS ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
16/30337049 DC : 0 BS EN 50290-2-34 - COMMUNICATION CABLES - PART 2-34: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE SHEATHING COMPOUND FOR OUTDOOR OPTICAL FIBRE CABLES
BS EN 61215-2:2017 Terrestrial photovoltaic (PV) modules. Design qualification and type approval Test procedures
03/319402 DC : DRAFT NOV 2003 BS EN 14035-26 - FIREWORKS - PART 26: PERCUSSION CAPS - SPECIFICATION AND TEST METHODS
PREN 50290-2-33 : DRAFT 2013 COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI ELEMENT METALLIC DATA CABLES FOR INDOOR APPLICATION
02/207432 DC : DRAFT JUN 2002 IEC 62217. ED.1.0 - CREATION OF A COMMON CLAUSE STANDARD FOR COMPOSITE INSULATORS
BS EN 12488:2016 Glass in building. Glazing recommendations. Assembly principles for vertical and sloping glazing
03/319401 DC : DRAFT NOV 2003 BS EN 14035-25 - FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS
DIN EN 15651-2:2016-10 (Draft) SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
BS EN IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes Specification for individual materials. Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications
10/30195690 DC : 0 BS EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
DIN EN 16523-1 E : 2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
12/30254135 DC : 0 BS EN 15651-2 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
I.S. EN ISO 21809-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
UNI EN 10245-5 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
CEI EN 50290-2-23 : 2014 COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
14/30304003 DC : 0 BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
02/206403 DC : DRAFT MAY 2002 IEC 62231. ED.1.0 - COMPOSITE STATION POST INSULATORS FOR SUBSTATIONS WITH A.C. VOLTAGES GREATER THAN 1000 V UPTO 245 KV - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
BS EN 14187-5:2003 Cold applied joint sealants Test method for the determination of the resistance to hydrolysis
PREN 15651-4 : DRAFT 2012 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
BS EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas Definitions, classification, general principles of design, performance requirements and test methods
UNE-EN 50617-1:2015 Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits
BS EN ISO 21809-3:2016 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings
13/30281710 DC : 0 BS EN 62444 - CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
BS ISO 11999-6:2016 PPE for firefighters. Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Footwear
13/30293741 DC : 0 BS EN 50290-2-37 - COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
13/30281393 DC : 0 BS EN 50290-2-23 - COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - PE INSULATION
UNE-EN 10310:2011 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
17/30340672 DC : 0 BS EN ISO 17892-12 - GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 12: DETERMINATION OF LIQUID AND PLASTIC TESTS
ISO 14145-1:2017 Roller ball pens and refills — Part 1: General use
UNE-EN 15947-4:2016 Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
UNE-EN 16265:2016 Pyrotechnic articles - Other pyrotechnic articles - Ignition devices
PD EN 14035-10:2004 Fireworks Double bangers. Specification and test methods
BS EN 50368:2003 Cable cleats for electrical installations
PREN 13832-3 : DRAFT 2017 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR PROLONGED CONTACT WITH CHEMICALS
UNI EN 13696 : 2009 WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE
DIN EN 15649-1:2014-06 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
PREN 16523-2 : DRAFT 2013 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
BS 5258-3(1975) : LATEST DRYING CABINETS
PD EN 14035-31:2005 Fireworks Shell-in-mortars. Specification and test methods
DIN EN 14035-13:2004-11 FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS
BS 7825-3.3:1997 Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of plastics
PD EN 14035-9:2004 Fireworks Crackling granules. Specification and test methods
02/122386 DC : DRAFT JUN 2002 ISO/DIS 7619-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS)
08/30180844 DC : DRAFT JUNE 2008 BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
I.S. EN 14035-38:2006 FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS
03/319404 DC : DRAFT NOV 2003 BS EN 14035-33 - FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS
16/30341186 DC : 0 BS EN ISO 11393-5 - PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN-SAWS - PART 5: TEST METHODS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE GAITERS
UNE-EN 15651-3:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
BS ISO 7619-2:2004 Rubber, vulcanized or thermoplastic. Determination of indentation hardness IRHD pocket meter method
PD CEN/TS 16354:2013 Laminate floor coverings. Underlays. Specification, requirements and test methods
12/30254132 DC : 0 BS EN 15651-1 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS
07/30156488 DC : 0 EN 15655 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS
BS EN 15655:2009 Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods
08/30176450 DC : DRAFT JAN 2008 BS EN ISO 27668-1 - GEL INK BALL PENS AND REFILLS - PART 1: GENERAL USE
BS 7933-2:2007 Electric cables. Accessories. Material characterisation Fingerprinting and type tests for heat shrinkable components for low voltage applications
16/30336750 DC : 0 BS EN 50290-2-35 - COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND
BS EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics
BS EN 60684-3-214:2014 Flexible insulating sleeving Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
14/30256269 DC : 0 BS EN ISO 24817 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
PD EN 14035-12:2003 Fireworks Flash bangers and flash banger batteries. Specification and test methods
14/30287623 DC : 0 BS ISO 10361 - TEXTILE FLOOR COVERINGS - PRODUCTION OF CHANGES IN APPEARANCE BY MEANS OF VETTERMANN DRUM AND HEXAPOD TUMBLER TESTER
BS EN 50262:1999 Cable glands for electrical installations
DIN EN 16523-1:2015-04 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
DD ISO/TS 24817 : 2006 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
BS EN 16523-2:2015 Determination of material resistance to permeation by chemicals Permeation by gaseous chemical under conditions of continuous contact
BS EN 71-1 : 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
PREN 15651-2 : DRAFT 2012 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
DIN EN 124-1:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS
15/30304408 DC : 0 BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
17/30346164 DC : 0 BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
UNI EN 71-13 : 2014 SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
BS EN ISO 21809-1:2011 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP)
ISO 22498:2005 Plastics Vinyl chloride homopolymer and copolymer resins Particle size determination by mechanical sieving
UNI EN 15649-1 : 2014 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
UNE-EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
I.S. EN 16256-5:2012 PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS
I.S. EN 62217:2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV))
BS IEC 62899-201 : 2016 PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
UNI EN ISO 20753 : 2014 PLASTICS - TEST SPECIMENS
I.S. EN 50617-1:2015 RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 1: TRACK CIRCUITS
SAE MS 1004 : 2017 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE H (HYDRAULIC FLUIDS) - SPECIFICATION
I.S. EN ISO 20029-2:2018 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017)
I.S. EN 13832-3:2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
SAE MS 1003-2 : 2004 Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013)
SAE MS 1001 : 2017 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION
ISO 11999-6:2016 PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 6: Footwear
I.S. EN 60684-3-247:2011 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL
ISO 26261-3:2017 Fireworks — Category 4 — Part 3: Test methods
I.S. EN 50290-2-21:2001 COMMUNICATION CABLES - PART 2-21: COMMON DESIGN RULES AND CONSTRUCTION - PVC INSULATION COMPOUNDS
I.S. EN 71-13:2014 SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
PREN 15307 : DRAFT 2014 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS
I.S. EN 13696:2009 WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE
PREN 50290-2-37 : DRAFT 2013 COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
14/30311496 DC : 0 BS EN 14187-5 - COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS
17/30359551 DC : 0 BS EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
15/30316975 DC : 0 BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
PD EN 14035-18:2004 Fireworks Hand-held fountains. Specification and test methods
ISO 7619-2:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method
I.S. EN ISO 28706-4:2016 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL (ISO 28706-4:2016)
I.S. EN 15947-4:2015 PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS
ASTM D 5963 : 2004 : R2015 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
UNE-EN 15551:2017 Railway applications - Railway rolling stock - Buffers
EN ISO 20753:2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
ISO 16365-2:2014 Plastics Thermoplastic polyurethanes for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
ISO 15676:2016 Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
EN 14187-5:2003 COLD APPLIED JOINT SEALANTS - PART 5: TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO HYDROLYSIS
ISO 19861:2015 Buildings and civil engineering works — Sealants — Determination of curing behaviour
ISO 21809-4:2009 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 4: Polyethylene coatings (2-layer PE)
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness)
ISO 10361:2015 Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester
DIN EN 295-3:2012-03 Vitrified clay pipe systems for drains and sewers - Part 3: Test methods
I.S. EN 50290-2-25:2013 COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS
I.S. EN 71-1:2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
S.R. CEN TR 15990:2010 DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES
EN 15468:2016 Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
UNE-EN ISO 21809-1:2019 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018)
IEC 61854:1998 Overhead lines - Requirements and tests for spacers
UNE-EN ISO 14910-2:2014 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
DIN EN ISO 14910-2 E : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
DIN EN 14865-2:2011-01 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010)
DIN EN 14510 E : 2005 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - DETERMINATION OF SOLE POSITIONING TACK (SPOTTING TACK)
DIN EN 10245-4:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011
BS EN 1504-7:2006 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Reinforcement corrosion protection
ISO 9054:1990 Cellular plastics, rigid — Test methods for self-skinned, high-density materials
BS EN 14354:2017 Wood-based panels. Wood veneer floor coverings
BS EN ISO 13628-10:2006 Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
UNE-EN 16028:2013 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
DIN EN 15189 E : 2007 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
BS EN 1391:1998 Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification
UNE-EN 1504-2:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
BS EN 13036-3:2002 Road and airfield surface characteristics. Test methods Measurement of pavement surface horizontal drainability
BS EN ISO 13000-2:2005 Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Preparation of test specimens and determination of properties
BS EN 15062:2006 Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions
DIN EN ISO 20344:2013-02 Personal protective equipment - Test methods for footwear (ISO 20344:2011)
EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
IEC 60684-3-214:2013 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
ISO 2039-2:1987 Plastics Determination of hardness Part 2: Rockwell hardness
DIN EN 15307:2015-04 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS
ISO 4613-2:1995 Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 12961:2001 Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives
BS EN 10290:2002 Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings
UNE-EN 14294:2010 Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes
15/30324856 DC : 0 BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
BS EN 13529:2003 Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack
BS EN 14879-4:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components
BS EN 14483-4:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
BS EN 14035-38:2006 Fireworks Shot tubes. Specification and test methods
BS EN 15434 : 2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
IEC 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
UNE-EN 10245-4:2012 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
IEC 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
UNE-EN 15307:2015 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
BS EN 14879-3:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components
BS EN 14035-34:2003 Fireworks Table bombs. Specification and test methods
BS EN 14035-19:2003 Fireworks Hand-held sparklers. Specification and test methods
BS EN 522:1998 Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification
UNE-EN 10245-2:2012 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
ISO 6265:2013 Alpine skis — Determination of deformation load and breaking load
IEC 61076-7-100:2006 Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification
BS EN ISO 2039-2:2000 Determination of Rockwell hardness. Rockwell hardness Rockwell hardness
DIN EN 15434:2010-07 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010)
BS EN 15468:2016 Laminate floor coverings. Elements with directly applied printing and resin surface layer. Specifications, requirements and test methods
BS EN 14035-24:2004 Fireworks Novelty matches. Specification and test methods
BS EN 14035-23:2003 Fireworks Non-hand-held sparklers. Specification and test methods
BS EN 15189:2006 Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods
BS EN 10245-4:2011 Steel wire and wire products. Organic coatings on steel wire Polyester coated wire
IEC 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
ISO 13000-2:2005 Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 2: Preparation of test specimens and determination of properties
BS EN 10245-1:2011 Steel wire and wire products. Organic coatings on steel wire General rules
ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
UNE-EN 1466:2015 Child use and care articles - Carry cots and stands - Safety requirements and test methods
UNE-EN 71-4:2013 Safety of toys - Part 4: Experimental sets for chemistry and related activities
BS EN 14510:2005 Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack)
I.S. EN 381-8:1997 PROTECTIVE CLOTHING FOR USERS OF HAND-HELD CHAIN SAWS - PART 8: TEST METHODS FOR CHAIN SAW PROTECTIVE GAITERS
BS EN ISO 9054:1999 Cellular plastics, rigid. Test methods for self-skinned high-density materials
UNE-EN 10245-1:2012 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
UNE-EN 14354:2017 Wood-based panels - Wood veneer floor coverings
ISO 12736:2014 Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
UNE 41302:2013 IN Instructions for the application of rendering and plastering mortars.
BS EN 14035-15:2003 Fireworks Fountains. Specification and test methods
BS EN 14035-5:2006 Fireworks Batteries and combinations. Specification and test methods
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
DIN EN 15468:2016-08 Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
DIN EN 15307 E : 2015 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS
DIN EN 10245-1:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
DIN EN 13036-3:2003-06 ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 3: MEASUREMENT OF PAVEMENT SURFACE HORIZONTAL DRAINABILITY
EN 14035-3 : 2004 FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS
EN 15651-2:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
EN 295-3:2012 Vitrified clay pipe systems for drains and sewers - Part 3: Test methods
EN 522 : 1998 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - BOND STRENGTH - MINIMUM REQUIREMENTS AND ADHESIVE CLASSIFICATION
EN 16261-3:2012 Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
EN 14879-3:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
EN 14035-27:2003/AC:2005 FIREWORKS - PART 27: ROCKETS - SPECIFICATION AND TEST METHODS
EN 14879-2:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
EN ISO 2898-2:2008 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008)
EN 14035-7 : 2004 FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS
EN 14879-5:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
EN 14510:2005 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack)
ONORM EN ISO 20344 : 2012 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2011)
EN 15189:2006 Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
EN 14035-25 : 2005 FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS
EN 14035-34:2003/AC:2005 FIREWORKS - PART 34: TABLE BOMBS - SPECIFICATION AND TEST METHODS
EN 13696:2008 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
EN 14035-35 : 2004 FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
EN 14294:2010 Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes
EN ISO 2039-2 : 1999 PLASTICS - DETERMINATION OF HARDNESS - PART 2 - ROCKWELL HARDNESS
EN 14035-22 : 2004 FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS
EN 15434:2006+A1:2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
EN 14035-24 : 2004 FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS
EN 16028:2012 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
EN 15551:2017 Railway applications - Railway rolling stock - Buffers
EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
EN 16805:2015 Diving equipment - Diving mask - Requirements and test methods
EN 1391 : 1998 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - A METHOD FOR EVALUATING THE BONDABILITY OF MATERIALS - MINIMUM REQUIREMENTS AND MATERIAL CLASSIFICATION
EN 15062:2006 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions
EN ISO 9054 : 1999 CELLULAR PLASTICS, RIGID - TEST METHODS FOR SELF-SKINNED, HIGH-DENSITY MATERIALS
EN 14035-4:2003/AC:2005 FIREWORKS - PART 4: BANGERS AND BANGER BATTERIES - SPECIFICATION AND TEST METHODS
EN 15947-4:2015 Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
EN 14035-15:2003/AC:2005 FIREWORKS - PART 15: FOUNTAINS - SPECIFICATION AND TEST METHODS
EN 14035-8 : 2004 FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS
EN 14035-19:2003/AC:2006 FIREWORKS - PART 19: HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS
EN 15649-1:2009+A2:2013 Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
EN 14035-17 : 2004 FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS
EN 15651-3:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
EN 14035-33 : 2005 FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS
EN ISO 28706-4:2016 Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2016)
EN 1392:2006 Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions
EN 14035-10 : 2004 FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS
EN 14035-23:2003/AC:2005 FIREWORKS - PART 23: NON-HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS
EN 14035-13 : 2004 FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS
EN 14035-12:2003/AC:2005 FIREWORKS - PART 12: FLASH BANGERS AND FLASH BANGER BATTERIES - SPECIFICATION AND TEST METHODS
EN 1504-7:2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
EN 16265:2015 Pyrotechnic articles - Other pyrotechnic articles - Ignition devices
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
EN 14035-18 : 2004 FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS
EN ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
EN 14035-6 : 2004 FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS
EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
EN 16256-5:2012 Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods
EN 16263-4:2015 Pyrotechnic articles - Other pyrotechnic articles - Part 4: Test methods
EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
EN ISO 12736:2014 Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014)
EN 10245-4:2011 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
EN 14865-2:2006+A2:2010 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
EN 14035-31 : 2005 FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS
EN 14035-28 : 2004 COR 2006 FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS
EN 381-8:1997 Protective clothing for users of hand-held chain saws - Part 8: Test methods for chain saw protective gaiters
EN 15307:2014 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
EN 14035-9 : 2004 FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS
EN 13893:2002 Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces
EN 14879-4:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
EN 15346:2014 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
EN 15651-1:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
EN 14035-38:2006 Fireworks - Part 38: Shot tubes - Specification and test methods
EN 14483-4 : 2004 VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 4: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY ALKALINE LIQUIDS USING A CYLINDRICAL VESSEL
EN 14035-5 : 2006 FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS
14/30303444 DC : 0 BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS
EN 71-13:2014 Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games
BS EN 16256-5:2012 Pyrotechnic articles. Theatrical pyrotechnic articles Test methods
PD EN 14035-20:2005 Fireworks Jumping crackers. Specification and test methods
BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties
PD EN 14035-33:2006 Fireworks Spinners. Specification and test methods
15/30315493 DC : 0 BS ISO 9838 - ALPINE AND TOURING SKI-BINDINGS - TEST SOLES FOR SKI-BINDING TESTS
PD ISO/TS 11819-3:2017 Acoustics. Measurement of the influence of road surfaces on traffic noise Reference tyres
BS ISO 21809-4:2009 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE)
UNI EN 16264 : 2014 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS
14/30312152 DC : 0 BS EN 16805 - DIVING EQUIPMENT - DIVING MASK - REQUIREMENTS AND TEST METHODS
PREN 71-4 : DRAFT 2011 SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
PREN 15651-1 : DRAFT 2012 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS
BS ISO 9523:2015 Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods
UNE-EN 16256-5:2013 Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods
I.S. EN 16805:2015 DIVING EQUIPMENT - DIVING MASK - REQUIREMENTS AND TEST METHODS
03/112821 DC : DRAFT AUG 2003 ISO 21509 - PLASTICS AND EBONITE - VERIFICATION OF SHORE HARDNESS DUROMETERS
UNE-EN 10245-5:2012 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
UNE-EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
BS EN 50290-2-29:2016 Communication cables Common design rules and construction. Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables
PREN 50290-2-29 : DRAFT 2016 COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES
13/30276234 DC : 0 BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
PREN 50290-2-35 : DRAFT 2016 COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND
11/30243837 DC : 0 BS EN 62217 - POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
13/30289256 DC : 0 BS EN 15468 - LAMINATE FLOOR COVERINGS - ELEMENTS WITH DIRECTLY APPLIED PRINTING AND RESIN SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
UNE-EN 15346:2015 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
BS ISO 24338:2014 Laminate floor coverings. Determination of abrasion resistance
DIN EN 14035-33:2006-01 FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS
I.S. EN 13832-2:2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
I.S. EN 16265:2015 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES
BS ISO 16365-1:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion Designation system and basis for specifications
BS ISO 10361:2015 Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester
03/100997 DC : DRAFT MAR 2003 BS EN 13022-2 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: PRODUCT STANDARD FOR ULTRA-VIOLET RESISTANT SEALANT AND STRUCTURAL SEALANT
08/30154948 DC : DRAFT FEB 2008 BS ISO 21809-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE)
BS EN 16261-3:2012 Pyrotechnic articles. Fireworks, Category 4 Test methods
08/30172148 DC : DRAFT MAY 2008 BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
BS EN 71-13:2014 Safety of toys Olfactory board games, cosmetic kits and gustative games
ONORM EN 71-13 : 2014 SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
SAE MS 1006 : 2018 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE F LUBRICANT FOR SPINDLE BEARINGS, AND ASSOCIATED CLUTCHES - SPECIFICATION
DIN EN 14035-21:2006-01 FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS
DIN EN 14035-20:2005-06 FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS
IEC 62444:2010 Cable glands for electrical installations
04/30123574 DC : DRAFT OCT 2004 EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS
15/30314236 DC : 0 BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO)
12/30254138 DC : 0 BS EN 15651-3 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS
UNE-EN 71-1:2015 Safety of toys - Part 1: Mechanical and physical properties
BS EN 13696:2008 Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance
DIN EN 16805:2016-02 DIVING EQUIPMENT - DIVING MASK - REQUIREMENTS AND TEST METHODS
12/30255619 DC : 0 BS ISO 6265 - ALPINE SKIS - DETERMINATION OF DEFORMATION LOAD AND BREAKING LOAD
14/30301109 DC : 0 BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS
07/30150249 DC : 0 BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
15/30324018 DC : 0 BS EN 62677-3-101 ED. 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: MATERIAL REQUIREMENTS - SHEET 101: HEAT-SHRINKABLE, POLYOLEFIN MOULDED SHAPES FOR LOW VOLTAGE APPLICATIONS
EN IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications
13/30293745 DC : 0 BS EN 50290-2-38 - COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
PREN 50290-2-23 : DRAFT 2013 COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - PE INSULATION
PREN 15346 : DRAFT 2013 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
DIN EN 14035-17:2004-11 FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS
09/30193391 DC : DRAFT MAY 2009 BS ISO 7619-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF INDENTATION HARDNESS - PART 1: DUROMETER METHOD (SHORE HARDNESS)
PREN 1504-7 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION
07/30139822 DC : 0
BS EN 16523-1 : 2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
UNE-EN 15651-2:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
00/103366 DC : DRAFT APR 2000 PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS
07/30163692 DC : 0 BS EN 15651-3 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 3: SEALANTS FOR SANITARY JOINTS
CEI EN 60544-4 : 2005 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS
CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 CONDUIT, TUBING, AND CABLE FITTINGS
EN 13832-3:2006 Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
UNE-EN 16263-4:2016 Pyrotechnics articles - Other pyrotechnic articles - Part 4: Test methods
ONORM EN ISO 14910-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
SAE MS 1009 : 2012 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE P PNEUMATIC TOOL OILS - SPECIFICATION
UNE-EN 50290-2-35:2016 Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound
I.S. EN 14035-18:2005 FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS
SAE MS 1010 : 2012 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE T TURBINE OILS - SPECIFICATION
ASTM D 5963 : 2004 : R2010 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
BS EN 15651-1:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for facade elements
I.S. EN 16263-4:2015 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS
I.S. EN IEC 62677-3-101:2018 HEAT-SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: SPECIFICATION FOR INDIVIDUAL MATERIALS - SHEET 101: HEAT-SHRINKABLE, POLYOLEFIN MOULDED SHAPES FOR LOW VOLTAGE APPLICATIONS
I.S. EN 13832-1:2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
I.S. EN ISO 14910-2:2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15)
I.S. EN 10245-5:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
ISO 8124-1:2018 Safety of toys — Part 1: Safety aspects related to mechanical and physical properties
UNE-EN 50290-2-37:2016 Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables
EN 61215-2 : 2017 COR 2018 TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 2: TEST PROCEDURES (IEC 61215-2:2016/COR1:2018)
UNE-EN 50548:2012 Junction boxes for photovoltaic modules
I.S. EN ISO 23936-1:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
I.S. EN 14035-20:2005 FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS
UNE-EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
S.R. CEN/TS 16354:2013 LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
I.S. EN 60455-3-8:2013 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV))
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
PREN 50290-2-25 : DRAFT 2013 COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS
BS EN 115-1:2017 Safety of escalators and moving walks Construction and installation
I.S. EN 15649-1:2009 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
EN 71-1:2014 Safety of toys - Part 1: Mechanical and physical properties
ISO 12757-1:2017 Ball point pens and refills — Part 1: General use
IEC 62631-3-1:2016 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method
PREN 17155 : DRAFT 2017 LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER
ISO 25947-4:2017 Fireworks — Categories 1, 2 and 3 — Part 4: Test methods
ISO 11393-5:2001 Protective clothing for users of hand-held chain-saws Part 5: Test methods and performance requirements for protective gaiters
I.S. EN 15651-3:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS
15/30327125 DC : 0 BS EN 1504-7 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION
I.S. EN ISO 24817:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION (ISO 24817:2017, CORRECTED VERSION 2018-01-01)
17/30360226 DC : 0 BS EN 17155 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF INDICATED CETANE NUMBER (ICN) OF MIDDLE DISTILLATE FUELS - PRIMARY REFERENCE FUELS CALIBRATION METHOD USING A CONSTANT VOLUME COMBUSTION CHAMBER
PREN 15651-3 : DRAFT 2012 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS
PREN 50548 : DRAFT 2009 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
PREN 50290-2-34 : DRAFT 2016 COMMUNICATION CABLES - PART 2-34: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE SHEATHING COMPOUND FOR OUTDOOR OPTICAL FIBRE CABLES
ASTM D 8115 : 2017 Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader)
EN ISO 13000-2:2005 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)
BS EN 13832-1:2006 Footwear protecting against chemicals Terminology and test methods
ISO 14910-2:2013 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
EN ISO 25649-1:2017 Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017)
UNE-EN ISO 20753:2015 Plastics - Test specimens (ISO 20753:2008)
EN 15655:2009 Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
EN 15651-4:2017/AC:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
S.R. CEN ISO TS 24817:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
EN 60684-3-247:2011/A1:2017 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-247:2011/A1:2016)
DIN EN 1504-7:2015-09 (Draft) PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION
DIN EN 14294 E : 2010 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES
DIN EN 14354 E : 2017 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
UNE-EN 15468:2016 Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
ISO 20344:2011 Personal protective equipment Test methods for footwear
BS EN 14294:2004 Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes
BS EN ISO 14910-2:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
BS EN ISO 2898-2:2008 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Preparation of test specimens and determination of properties (ISO 2898-2:2008)
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
BS EN 14035-28:2004 Fireworks Roman candles. Specification and test methods
BS EN 10245-2:2011 Steel wire and wire products. Organic coatings on steel wire PVC finished wire
BS EN 14865-2 : 2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
UNE-EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
BS EN 15346:2014 Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
BS EN ISO 6808:2014 Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification
BS EN 14035-27:2003 Fireworks Rockets. Specification and test methods
ISO 21509:2006 Plastics and ebonite Verification of Shore durometers
EN 50548 : 2011 AMD 2 2014 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
CEN/TR 14548:2003 Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
DIN EN ISO 2898-2:2009-03 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 15651-3:2017-07 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS
EN 13529:2003 Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack
EN 60684-3-214:2014 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
CEN/TS 16165:2016 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
DIN EN 16523-2:2015-04 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
DIN EN 14510:2005-08 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack)
DIN EN 14879-3:2007-02 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
EN 62631-3-1:2016 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method
EN 60544-4:2003 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments
DIN EN ISO 13000-2:2006-02 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)
DIN EN ISO 14910-2:2013-06 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
DIN EN 10245-2:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011
CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006)
EN 10290:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
EN 10329:2006 Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
EN 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
EN 50290-2-23:2013 COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
DIN EN 14879-5:2007-10 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
DIN EN 10329:2006-04 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
EN 50290-2-38 : 2016 Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables
DIN EN 14354:2017-11 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
EN 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
EN 50290-2-35 : 2016 Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound
EN 50617-1:2015 Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits
EN 50290-2-21:2001/A1:2007/AC:2016 COMMUNICATION CABLES - PART 2-21: COMMON DESIGN RULES AND CONSTRUCTION - PVC INSULATING COMPOUNDS
UNE-EN 15434:2007 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
BS 2782-3.365C(1992) : 1992 AMD 10694 PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS
ONORM EN ISO 12736 : 2015 PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014)

AS/NZS ISO 8124.1:2019 Safety of toys Safety aspects related to mechanical and physical properties
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
AS/NZS 8124.4:2020 Safety of toys Experimental sets for chemistry and related activities (ISO 8124-10:2019, MOD)

View more information
US$49.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.