ISO 9002:1994

Withdrawn

View Superseded by

Quality systems — Model for quality assurance in production, installation and servicing

Amended by

ISO 9002:1994/Cor 1:1995

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

03-08-2019

Language(s)

English, French

Published date

06-30-1994

Publisher

International Organization for Standardization

DevelopmentNote	CORRIGENDUM 1 ONLY APPLIES TO THE FRENCH VERSION. For the year 2000 revision, ISO 9001 will replace ISO 9001, 9002 and 9003 in the 1994 version. ISO 9000 is being developed in parallel with ISO 9001 and 9004. ISO 9004 will be used to go beyond Quality Management requirements. 31.8.99 ISO/FDIS 9000, ISO/FDIS 9001, ISO/FDIS 9004 Final Draft Available September 2000.
DocumentType	Standard
Pages	10
PublisherName	International Organization for Standardization
Status	Withdrawn
SupersededBy	ISO 9001:2015 ISO 9001:2000
Supersedes	ISO 9002:1987 NS 5802 : 1981

Standards	Relationship
DIN ISO 9002:1990-05	Identical
UNI EN ISO 9002 : 1994	Identical
NEN EN ISO 9002 : 1994	Identical
I.S. EN ISO 9002:1994	Identical
NF EN ISO 9002 : 1994	Identical
CSA ISO 9002 : 94(R2000)	Identical
NS EN ISO 9002 : 2ED 94	Identical
AS 3902-1987	Identical
BS EN ISO 9002:1994	Identical
NBN EN ISO 9002 : 1994	Identical
NBN EN 1092-2 : 1997	Identical
SN EN ISO 9002 : 94 AC 97	Identical
AS/NZS ISO 9002:1994	Identical
UNE-EN ISO 9002:1994	Identical
NFX 50 132 : 1988	Identical
GOST R ISO 9002 : 1996	Identical
AS/NZS ISO 9001-3:1994 (Lam)	Identical
EN ISO 9002:1994/AC:1997	Identical
DIN EN ISO 9002:1994-08	Identical
BS 5750-2:1987	Identical
CSA Q9002 : 1991	Identical
DIN EN ISO 9002 E : 1994	Identical

I.S. EN 12569:2000	INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS
I.S. EN ISO/IEC 15416:2002	INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS
I.S. EN 1457:1999	CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN 9000-2:2000-11 (Draft)	AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 2: REQUIREMENTS APPLICABLE TO MAINTENANCE ORGANIZATIONS
DIN EN 9000-3:2000-11 (Draft)	AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 3: REQUIREMENTS APPLICABLE TO STOCKISTS-DISTRIBUTORS
BS EN 1254-4:1998	Copper and copper alloys. Plumbing fittings Fittings combining other end connections with capillary or compression ends
I.S. EN 1254-3:1998	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES
CSA ISO 11135 : 1998:R2003	MEDICAL DEVICES - VALIDATION AND ROUTINE CONTROL OF ETHYLENE OXIDE STERILIZATION
CSA C62155 : 2006 : R2011	HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
CSA C1325 : 1999 : R2016	INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
AAMI HE74 : 2001 : R2009	HUMAN FACTORS DESIGN PROCESS FOR MEDICAL DEVICES
EN ISO 14922-2:1999	Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999)
EN ISO 14922-4:1999	Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999)
EN 45510-5-2 : 1998	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-2: GAS TURBINES
DIN EN ISO-IEC 15416 E : 2002	INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS
I.S. EN ISO 14922-3:1999	THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 3: STANDARD QUALITY REQUIREMENTS
ISO 10012-1:1992	Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment
EN 45510-5-4:1998	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-4: HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES
ISO 13683:1997	Sterilization of health care products Requirements for validation and routine control of moist heat sterilization in health care facilities
BS EN 1254-1:1998	Copper and copper alloys. Plumbing fittings Fittings with ends for capillary soldering or capillary brazing to copper tubes
EN 61479:2001/A1:2002	LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
EN 10242:1994/A2:2003	THREADED PIPE FITTING IN MALLEABLE CAST IRON
IEC 61156-1-1:2001	Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability Approval - Generic specification
EN 62155:2003	Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
EN 60694:1996/A2:2001	COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
SAE AS 7001 : 2017	NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) PROGRAM DESCRIPTION
EN 13311-1:2001	Biotechnology - Performance criteria for vessels - Part 1: General performance criteria
BS EN 10284:2000	Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
ISO 3999-1:2000	Radiation protection Apparatus for industrial gamma radiography Part 1: Specifications for performance, design and tests
EN 12079 : 1999	OFFSHORE CONTAINERS - DESIGN, CONSTRUCTION, TESTING, INSPECTION AND MARKING
CEN ISO/TR 13881:2011	Petroleum and natural gas industries - Classification and conformity assessment of products, processes and services (ISO/TR 13881:2000)
BS EN 61479:2001	Live working. Flexible conductor covers (line hoses) of insulating material
BS EN 1492-1 : 2000	TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
EN 12306:1997	Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination
EIA 681 : 2015 STABILIZED	ASSESSMENT GUIDE FOR PROCESS CERTIFICATION
EN 12195-2:2000	Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
IEC 60748-23-1:2002	Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification
ISO 9152:1998	Aerospace Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa Procurement specification
I.S. EN ISO 14922-2:1999	THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 2: COMPREHENSIVE QUALITY REQUIREMENTS
ISO 9418:1998	Aerospace Rivets, solid, in aluminium or aluminium alloys Procurement specification
DIN EN 1677-5:2009-03	COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
EN 61209:1999	Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results
DIN ISO 2020-2:1999-01	AEROSPACE - PREFORMED FLEXIBLE STEEL WIRE ROPE FOR AIRCRAFT CONTROLS - PART 2: TECHNICAL SPECIFICATION
ISO 2020-2:1997	Aerospace — Preformed flexible steel wire rope for aircraft controls — Part 2: Technical specification
DIN EN 1492-2:2009-05	TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
DIN EN 1492-1:2009-05	TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
EN 60870-5-6:2009	Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the EN 60870-5 companion standards
EN 12462:1998	Biotechnology - Performance criteria for pumps
ISO 13411:1997	Aerospace — Airframe needle roller, cylindrical roller and track roller bearings — Technical specification
EN 12094-7:2000/A1:2005	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 7: REQUIREMENTS AND TEST METHODS FOR NOZZLES FOR CO[2] SYSTEMS
EN 12781:2001	Wallcoverings - Specification for cork panels
EN 60660:1999	Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV
BS EN 60660:2000	Insulators. Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV
ISO 28278-1:2011	Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing
EN 1092-2:1997	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
EN 13312-1:2001	Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria
ISO 14922-3:1999	Thermal spraying Quality requirements of thermally sprayed structures Part 3: Standard quality requirements
ISO 12288:2000	Aerospace Rivets, solid, in nickel alloy Procurement specification
EN 45510-1 : 1997	Guide for procurement of power station equipment - Part 1: Common clauses
BS ISO 10290:1993	Textiles. Cotton yarns. Specifications
EN 45510-6-2 : 1998	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-2: TURBINE AUXILIARIES - FEEDWATER HEATERS
CR ISO 17663 : 2001	WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES
BS EN 877 : 1999	CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
DIN EN 74-2:2009-01	Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
ISO 21138-3:2007	Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Pipes and fittings with non-smooth external surface, Type B
ISO 10792-3:1995	Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 3: Technical specification
DIN EN 12890:2000-06	FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
ISO 20492-1:2008	Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests
EN 60966-1:1999	Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
EN 61284:1997	Overhead lines - Requirements and tests for fittings
BS EN 1653:1998	Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units
SAE ARP 5596 : 2005(S2012)	CARGO SHORING GUIDELINES
EN 60746-1:2003	Expression of performance of electrochemical analyzers - Part 1: General
SAE ARP 5486 : 2013	AIR CARGO PALLETS - UTILIZATION GUIDELINES
DIN ISO 15226:2017-03	TECHNICAL PRODUCT DOCUMENTATION - LIFE CYCLE MODEL AND ALLOCATION OF DOCUMENTS (ISO 15226:1999)
EN 877:1999/A1:2006/AC:2008	CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
ISO 13463:1999	Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel — Guidelines to help in the definition of a product specification
EN 12109:1999	Vacuum drainage systems inside buildings
VDE 0441-3 : 2000-12	INSULATORS - TESTS ON INDOOR POST INSULATORS OF ORGANIC MATERIAL FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV UP TO BUT NOT INCLUDING 300 KV
EN 12690:1999	Biotechnology - Performance criteria for shaft seals
DIN EN 15644:2009-03	TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
EN 12763:2000	Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery
ISO 10011-1:1990	Guidelines for auditing quality systems Part 1: Auditing
EN 12094-13:2001/AC:2002	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 13: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES AND NON-RETURN VALVES
EN 12101-7:2011	Smoke and heat control systems - Part 7: Smoke duct sections
CR 13576 : 1999	IMPLEMENTATION OF EN 729 ON QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS
BS IEC 60748-23-1:2002	Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification Generic specification
BS EN 1492-2 : 2000	TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES, FOR GENERAL PURPOSE USE
EN 12075:1997	Biotechnology - Large-scale process and production - Procedures for fermentation and downstream processes
IEC 62155:2003	Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
EN 61229:1995/A2:2002	RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS
I.S. EN ISO 14922-1:1999	THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 1: GUIDANCE FOR SELECTION AND USE
DEFSTAN 05-92/2(1995) : 1995	QUALITY SYSTEM REQUIREMENTS FOR PRODUCTION, INSTALLATION AND SERVICING
BS EN 12101-8:2011	Smoke and heat control systems Smoke control dampers
BS EN 12101-7:2011	Smoke and heat control systems Smoke duct sections
BS EN 1457:1999	Chimneys. Clay/ceramic flue liners. Requirements and test methods
I.S. EN 1677-5:2001	COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
IPC SPVC-LAT1 : 2010	ANALYTICAL PROCEDURES FOR PORTABLE LEAD-FREE ALLOY TEST DATA
PREN 2043 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS)
BS EN ISO 14922-4:1999	Thermal spraying. Quality requirements of thermally sprayed structures Elementary quality requirements
BS EN 13380:2001	General requirements for components used for renovation and repair of drain and sewer systems outside buildings
I.S. EN 1492-2:2000	TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
DEFSTAN 05-94/1(1991) : 1991	GUIDANCE ON QUALITY SYSTEM REQUIREMENTS FOR THE IMPLEMENTATION OF DEFSTANS 05-91, 05-92, AND 05-93
DEFSTAN 61-3/5(1992) : INTERIM	GENERIC SPECIFICATION FOR BATTERIES, NON RECHARGEABLE, PRIMARY
CLC/TS 61112:2006	Blankets of insulating material for electrical purposes
DEFSTAN 05-92/1(1991) : 1991	QUALITY SYSTEM REQUIREMENTS FOR PRODUCTION AND INSTALLATION
DEFSTAN 05-94/2(1995) : 1995	GUIDANCE ON QUALITY SYSTEM REQUIREMENTS FOR THE IMPLEMENTATION OF DEFSTANS 05-91, 05-92 AND 05-93
MIL-DTL-13931 Revision J:1999	Cannon: General Specification for
SBAC TS 138 : 6	MANUFACTURING SPECIFICATION FOR INSERTS, IMPERIAL, THINWALL, SCREW LOCKING, (INCONEL 718), SILVER COATED
DEFSTAN 23-6/3(2000) : 2000	GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT
PREN 3043 : 200P2	AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 900 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
PREN 3005 : 200P1	AEROSPACE SERIES - NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - TECHNICAL SPECIFICATION
PREN 2582 : 200P1	AEROSPACE SERIES - BOLTS IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - TECHNICAL SPECIFICATION
BS EN ISO 14922-2:1999	Thermal spraying. Quality requirements of thermally sprayed structures Comprehensive quality requirements
DD ENV 61400-1:1995	Wind turbine generator systems Safety requirements
I.S. EN 1492-1:2000	TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
I.S. EN ISO 10472-1:2008	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
I.S. EN ISO 9000-1:1994	QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 1: GUIDELINES FOR SELECTION AND USE
I.S. EN 1254-4:1998	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
ISO 9000-1:1994	Quality management and quality assurance standards — Part 1: Guidelines for selection and use
I.S. EN 1254-1:1998	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES
CAN/CSA-E432-2-98 (R2017)	Safety Specifications for Incandescent Lamps - Part 2: Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes (adopted IEC 432-2:1994, first edition, including Amendment 1:1996 and Amendment 2:1997, with Canadian deviations) \| Prescriptions de sécurité pour lampes à incandescence - Partie 2: Lampes tungstène-halogène pour usage domestique et éclairage général similaire (norme CEI 432-2:1994 adoptée, première édition, avec l\'amendement 1:1996 and l\'amendement 2:1997, avec exigences propres au Canada)
CSA E432.2 : 1998 : INC : UPD 1 : 1998 : R2012	SAFETY SPECIFICATIONS FOR INCANDESCENT LAMPS - TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
CSA ISO 13488 : 1998	QUALITY SYSTEMS - MEDICAL DEVICES - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9002
CSA ISO 11137 : 1998	STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS FOR VALIDATION AND ROUTINE CONTROL - RADIATION STERILIZATION
IEC 60746-2:2003	Expression of performance of electrochemical analyzers - Part 2: pH value
ISO 10721-2:1999	Steel structures — Part 2: Fabrication and erection
ISO 21138-2:2007	Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2: Pipes and fittings with smooth external surface, Type A
ISO 13488:1996	Quality systems — Medical devices — Particular requirements for the application of ISO 9002
DIN EN 15650:2010-09	Ventilation for buildings - Fire dampers
IEC 60660:1999	Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV
I.S. EN ISO 14922-4:1999	THERMAL SPRAYING - QUALITY REQUIREMENTS OF THERMALLY SPRAYED STRUCTURES - PART 4: ELEMENTARY QUALITY REQUIREMENTS
ISO 8402:1994	Quality management and quality assurance — Vocabulary
IEC 61243-2:1995+AMD1:1999+AMD2:2002 CSV	Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.
ISO 14922-4:1999	Thermal spraying Quality requirements of thermally sprayed structures Part 4: Elementary quality requirements
ISO 10955:1999	Aerospace — End-fittings and turnbarrels for aircraft control wire rope — Technical specification
DIN EN 10242:1995-03	THREADED PIPE FITTING IN MALLEABLE CAST IRON
ISO/TR 13881:2000	Petroleum and natural gas industries Classification and conformity assessment of products, processes and services
ISO 9763:1999	Aerospace — Aircraft control wire rope assemblies — Technical specification
IEC 60746-1:2003	Expression of performance of electrochemical analyzers - Part 1: General
IEC 61229:1993+AMD1:1998+AMD2:2002 CSV	Rigid protective covers for live working on a.c. installations
IEC 61207-3:2002	Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
ISO 14190:1998	Aerospace — Airframe rolling bearings: ball and spherical roller bearings — Technical specification
ISO 10472-1:1997	Safety requirements for industrial laundry machinery Part 1: Common requirements
ISO 14922-2:1999	Thermal spraying Quality requirements of thermally sprayed structures Part 2: Comprehensive quality requirements
ISO 11134:1994	Sterilization of health care products — Requirements for validation and routine control — Industrial moist heat sterilization
ISO 3183-2:1996	Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B
ISO 11137:1995	Sterilization of health care products Requirements for validation and routine control Radiation sterilization
ISO/IEC Guide 62:1996	General requirements for bodies operating assessment and certification/registration of quality systems
IEC 61481:2001+AMD1:2002+AMD2:2004 CSV	Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
ISO/IEC Guide 25:1990	General requirements for the competence of calibration and testing laboratories
ISO 21927-8:2017	Smoke and heat control systems — Part 8: Smoke control dampers
ISO 9000-4:1993	Quality management and quality assurance standards — Part 4: Guide to dependability programme management
ISO 9139:1998	Aerospace — Nuts, plain or slotted (castellated) — Procurement specification
97/703020 DC : 0	ISO/DIS 3999 - APPARATUS FOR INDUSTRIAL GAMMA RADIOGRAPHY - DESIGN AND TEST CRITERIA
SBAC TS 172 : 4	PERFORMANCE SPECIFICATION FOR NUT, UNION, METRIC THREADED, SELF-LOCKING, A286 DRY FILM LUBRICATED
ASTM D 6590/D6590M :2000	Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
BS EN 12094-13:2001	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for check valves and non-return valves
ASTM D 6788 : 2002 : R2017	Standard Specification for Repositionable Pressure-Sensitive Flags
VDE 0682-412 : 2001 AMD 1 2003	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
ASME B16.5 : 2017	PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
DIN EN 61243-2 : 2001 AMD 2 2003	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
ASTM D 6787 : 2002 : R2012	Standard Specification for Repositionable Note Pad
BS EN ISO/IEC 15416:2002	Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Linear symbols
BS EN ISO 15541:2001	Ships and marine technology. Fire resistance of hose assemblies. Requirements for the test bench
BS EN 61190-1-1:2002	Attachment materials for electronic assembly Requirements for soldering fluxes for high-quality interconnections in electronics assembly
BS EN 13312-1:2001	Biotechnology. Performance criteria for piping and instrumentation General performance criteria
BS EN ISO 13488:2001	Quality systems. Medical devices. Particular requirements for the application of EN ISO 9002
BS EN 60746-1:2003	Expression of performance of electrochemical analyzers General
DIN EN 61284 : 1998	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
DD ENV 1453-2:2001	Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for the assessment of conformity
BS EN ISO 14111:1999	Natural gas. Guidelines to traceability in analysis
BS EN 45510-6-2:1998	Guide for the procurement of power station equipment. Turbine auxiliaries Feedwater heaters
BS EN 61189-3:2008	Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for interconnection structures (printed boards)
BS IEC 61111:1992	Matting of insulating material for electrical purposes
BS EN 60694:1997	Common specifications for high-voltage switchgear and controlgear standards
BS EN 61192-1:2003	Workmanship requirements for soldered electronic assemblies General
BS EN 45510-4-8:2000	Guide for the procurement of power station equipment. Boiler auxiliaries Dust handling plant - Section 8: Dust handling
BS EN 1826:1997	Biotechnology. Large-scale process and production. Control procedures for raw materials
BS EN 2000:1992	Quality assurance. EN aerospace products. Approval of the quality system of manufacturers
BS IEC 61112:1992	Blankets of insulating material for electrical purposes
DD ENV 1401-2:2001	Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) Guidance for assessment of conformity
BS EN 1654:1998	Copper and copper alloys. Strip for springs and connectors
BS EN 61192-2:2003	Workmanship requirements for soldered electronic assemblies Surface-mount assemblies
BS A 342:1999	Nuts, plain or slotted (castellated). Procurement specification
BS ISO 10792-3:1995	Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner Technical specification
BS 2A 302:2000	Nuts, self-locking, with maximum operating temperatures less than or equal to 425°C. Procurement specification
BS EN 45012:1998	General requirements for bodies operating assessment and certification/registration of quality systems
BS EN ISO 9000-1:1994	Quality management and quality assurance standards Guidelines for selection and use
BS EN 62155:2003	Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
ASTM D 6788 : 2002 : R2007	Standard Specification for Repositionable Pressure-Sensitive Flags
BS EN 61264:1999	Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
SBAC TS 156 : 2	PERFORMANCE SPECIFICATION OF INSERT SALVAGE METRIC THINWALL SCREW LOCKING, INCONEL 718 SILVER COATED
ASTM D 6123/D6123M : 1997 : R2012	Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
BS EN 12306:1998	Biotechnology. Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination
BS EN 45510-1:1998	Guide for the procurement of power station equipment Common clauses
BS EN 867-1:1997	Non-biological systems for use in sterilizers General requirements
BS EN 45510-5-2:1998	Guide for the procurement of power station equipment Gas turbines
ASTM D 6590/D6590M : 2000 : R2012	Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
VDI 4060 Blatt 2:2005-06	Integrated Management Systems - Guidance for practical implementation - Case studies
ASTM D 6123/D6123M : 1997 : R2007	Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
BS EN 1074-1:2000	Valves for water supply. Fitness for purpose requirements and appropriate verification tests General requirements
ASTM E 2484 : 2008 : R2015	Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices (Withdrawn 2024)
ASTM D 6788 : 2002	Standard Specification for Repositionable Pressure-Sensitive Flags
ASTM D 6787 : 2002 : R2007	Standard Specification for Repositionable Note Pad
BS EN 3207:1998	Rubber compounds. Technical specification
BS EN 45510-6-5:2000	Guide for the procurement of power station equipment. Turbine auxiliaries Dry cooling systems - Section 5: Dry cooling systems
BS EN 12079:1999	Offshore containers. Design, construction, testing, inspection and marking
BS EN 45510-4-2:1999	Guide for the procurement of power station equipment. Boiler auxiliaries Gas-air, steam-air and gas-gas heaters - Gas-air,steam-air and gas-gas heaters
BS EN 12109:1999	Vacuum drainage systems inside buildings
BS EN 1592-1:1998	Aluminium and aluminium alloys. HF seam welded tubes Technical conditions for inspection and delivery
DD ENV ISO 14907-1:2001	Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Test procedures for user and fixed equipment Description of test procedures
BS EN 866-1:1997	Biological systems for testing sterilizers and sterilization processes General requirements
BS EN 13311-1:2001	Biotechnology. Performance criteria for vessels General performance criteria
BS EN 12690:1999	Biotechnology. Performance criteria for shaft seals
BS A 302:1992	Self-locking nuts with maximum operating temperature less than or equal to 425°C. Procurement specification
BS EN 15644:2008	Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements
BS EN 60383-1:1998	Insulators for overhead lines with a nominal voltage above 1000 V Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria
BS A 332:1999	Aerospace. Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa. Procurement specification
BS SP 172:1999	Rivets, solid, in aluminium or aluminium alloys. Procurement specification
NEMA TP 2-2005	STANDARD TEST METHOD FOR MEASURING THE ENERGY CONSUMPTION OF DISTRIBUTION TRANSFORMERS
BS EN 45510-6-1:1998	Guide for the procurement of power station equipment. Turbine auxiliaries Deaerators
BS EN 45510-4-10:2000	Guide for the procurement of power station equipment. Boiler auxiliaries Flue gas denitrification (De-NOx) plant - Section 10: Flue gas denitrification (De-Nox) plant
BS 7011-2.2:1998	Consumable accessories for light microscopes. Slides Specification for materials and quality of finish
BS EN 45510-7-1:2000	Guide for the procurement of power station equipment. Pipework and valves High pressure piping systems - Section 1: High pressure piping systems
DD ENV 50232:1997	Aeronautical ground lighting electrical installation. Isolating transformer. Equipment specifications and tests
BS EN 868-1:1997	Packaging materials and systems for medical devices which are to be sterilized General requirements and test methods
BS EN 45510-3-3:2000	Guide for the procurement of power station equipment. Boilers Boilers with fluidized bed firing - Section 3: Boilers with fluidised bed firing
BS 7520:1995	Guide to quality assurance plans for tools for live working
BS W 14:1999	Aircraft control wire rope assemblies. Technical specification
BS EN ISO 4516:2002	Metallic and other inorganic coatings. Vickers and Knoop microhardness tests
BS EN 45510-8-1:1998	Guide for the procurement of power station equipment Control and instrumentation
BS EN 45510-6-9:2000	Guide for the procurement of power station equipment. Turbine auxiliaries Cooling water systems - Section 9: Cooling water systems
VDI 4060 Blatt 1:2005-06	Integrated Management Systems - Guidance for practical implementation - General information
ASTM D 6590/D6590M : 2000 : R2006	Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
BS EN 45510-4-1:1999	Guide for the procurement of power station equipment. Boiler auxiliaries Equipment for reduction of dust emissions - Equipment for the reduction of dust emissions
BS EN 12884:1999	Biotechnology. Performance criteria for centrifuges
BS EN 45510-6-3:1998	Guide for the procurement of power station equipment. Turbine auxiliaries Condenser plant
ASTM D 6123/D6123M : 1997	Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
BS EN ISO 9003:1994	Quality systems. Model for quality assurance in final inspection and test
ASTM E 2513 : 2007 : R2012	Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
ASTM D 6787 : 2002	Standard Specification for Repositionable Note Pad
BS 5750-14:1993	Quality systems Guide to dependability programme management
ASTM D 6788 : 2002 : R2012	Standard Specification for Repositionable Pressure-Sensitive Flags
BS ISO 14964:2000	Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration
ASTM D 6123/D6123M : 1997 : R2003	Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
BS EN 45510-6-7:1998	Guide for the procurement of power station equipment. Turbine auxiliaries Moisture separator reheaters
BS ISO 2020-2:1997	Aerospace. Preformed flexible steel wire rope for aircraft controls Technical specification
BS ISO 13463:1999	Nuclear-grade plutonium dioxide powder for fabrication of light water reactor MOX fuel. Guidelines to help in the definition of a product specification
BS EN 45510-4-9:2000	Guide for the procurement of power station equipment. Boiler auxiliaries Sootblowers - Section 9: Sootblowers
BS EN 12462:1998	Biotechnology. Performance criteria for pumps
BS EN 45510-6-8:2000	Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes
ASTM D 5749 : 2017 : REDLINE	Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
SBAC TS 153 : 2	PERFORMANCE SPECIFICATION OF INSERT SALVAGE, IMPERIAL, THINWALL SCREW LOCKING, INCONEL 718, SILVER COATED
VDE 0212-1 : 1998	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
BS EN 30011-1:1993	Guidelines for auditing quality systems Guidelines for auditing quality systems. Auditing
BS EN 45510-5-3:1998	Guide for the procurement of power station equipment Wind turbines
BS EN 45510-7-2:2000	Guide for the procurement of power station equipment. Pipework and valves Boiler and high pressure valves - Section 2: Boiler and high pressure valves
BS EN 60746-2:2003	Expression of performance of electrochemical analyzers pH value
DD ENV ISO 11133-1:2000	Microbiology of food and animal feeding stuffs. Guidelines on quality assurance and performance testing of culture media General guidelines on quality assurance of culture media in the laboratory
BS EN 61229:1996	Rigid protective covers for live working on a.c. installations
BS EN 61481:2001	Live working. Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.
DIN EN 60660 : 2000	INSULATORS - TESTS ON INDOOR POST INSULATORS OF ORGANIC MATERIAL FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV UP TO BUT NOT INCLUDING 300 KV
BS EN 45510-5-1:1998	Guide for the procurement of power station equipment Steam turbines
BS EN 15650:2010	Ventilation for buildings. Fire dampers
BS EN 773:1999	General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
BS EN 12094-7:2001	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for nozzles for CO2 systems
BS EN ISO 10472-1:2008	Safety requirements for industrial laundry machinery Common requirements
BS EN 12885:1999	Biotechnology. Performance criteria for cell disrupters
PD IEC WT 01:2001	IEC system for conformity testing and certification of wind turbines. Rules and procedures
BS A 351:2000	Rivets, solid, in nickel alloy. Procurement specification
BS EN 61243-2:1998	Live working. Voltage detectors Resistive type to be used for voltages of 1 kV to 36 kV a.c.
ASTM E 2513 : 2007	Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
BS EN 1652:1998	Copper and copper alloys. Plate, sheet, strip and circles for general purposes
BS EN 681-4:2000	Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements
BS EN 45510-4-3:1999	Guide for the procurement of power station equipment. Boiler auxiliaries Draught plant - Draught plant
BS EN 1293:1999	General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers
BS EN 45510-3-1:2000	Guide for the procurement of power station equipment. Boilers Water tube boilers - Section 1: Water tube boilers
BS A 352:2000	Rivets, solid, in titanium or titanium alloy. Procurement specification
BS EN 1065:1999	Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests
BS EN 61209:1999	Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results
PD CEN ISO/TR 13881:2011	Petroleum and natural gas industries. Classification and conformity assessment of products, processes and services
PD 6538:1993	Vision 2000. A strategy for international standards\' implementation in the quality arena during the 1990s
BS EN 45510-4-6:1999	Guide for the procurement of power station equipment. Boiler auxiliaries Flue gas desulfurization (De-SO<sub>x</sub>) plant - Flue gas desulphurization (De-SOx) plant
ASTM E 2484 : 2008	Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
BS A 363:2000	Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification
BS EN 45510-6-6:2000	Guide for the procurement of power station equipment. Turbine auxiliaries Turbine auxiliaries. Wet and wet/dry cooling towers - Section 6: Wet/dry cooling towers
BS EN 61284:1998	Overhead lines. Requirements and tests for fittings
BS EN ISO 9004-1:1994	Quality management and quality assurance standards. Guidelines
BS EN 1758:1998	Copper and copper alloys. Strip for lead frames
I.S. EN ISO 9003:1994	QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN FINAL INSPECTION AND TEST
S.R. CR 14245:2001	GUIDELINES FOR THE APPLICATION OF EN 197-2 'CONFORMITY EVALUATION'
EN 1254-3:1998	Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes
ISO 9003:1994	Quality systems Model for quality assurance in final inspection and test
I.S. EN 1254-2:1998	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES
I.S. EN 1254-5:1998	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES
CSA ISO 9004-3 : 1994	QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS
CSA C61400-2:2008	WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
CSA ISO 10011-1 : 1994	GUIDELINES FOR AUDITING QUALITY SYSTEMS - PART 1: AUDITING
IEC 61479:2001+AMD1:2002 CSV	Live working - Flexible conductor covers (line hoses) of insulating material
CSA C1325 : 1999 : R2011	INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
ASTM E 2952 : 2017 : REDLINE	Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED)
AAMI HE74 : 2001	HUMAN FACTORS DESIGN PROCESS FOR MEDICAL DEVICES
ISO 4516:2002	Metallic and other inorganic coatings — Vickers and Knoop microhardness tests
ISO 12290:2000	Aerospace Rivets, solid, in titanium or titanium alloy Procurement specification
ISO 5858:1999	Aerospace Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C Procurement specification
ISO/TR 12662:1997	Certification scheme for prestressing steels
UNE-EN 74-2:2010	Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
ISO 14922-1:1999	Thermal spraying Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use
ISO 16010:2005	Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
ISO 21927-7:2017	Smoke and heat control systems — Part 7: Smoke ducts sections
IEC 60966-1:1999	Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods
ISO 8230:1997	Safety requirements for dry-cleaning machines using perchloroethylene
DIN EN 1254-1:1998-03	Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
ISO/TR 13352:1997	Guidelines for interpretation of ISO 9000 series for application within the iron ore industry
BS ISO 10955:1999	End-fittings and turnbarrels for aircraft control wire rope. Technical specification
EN 50103 : 1995	GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR THE ACTIVE (INCLUDING ACTIVE IMPLANTABLE) MEDICAL DEVICE INDUSTRY
CEI EN 50155 : 2008	RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
99/201502 DC : 0
ASTM D 6787/D6787M : 2002 : R2012 : EDT 1	Standard Specification for Repositionable Note Pad
CSA ISO 9000-2 : 0	QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002, AND ISO 9003
00/243317 DC : DRAFT JUL 2000
BS ISO 1834:1999	Short link chain for lifting purposes. General conditions of acceptance
UNI EN 1492-2 : 2009	TEXTILE SLINGS - SAFETY - PART 2: ROUND SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES
CSA ISO 9000-4 : 0	QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GUIDE TO DEPENDABILITY PROGRAMME MANAGEMENT
DIN V VDE 0829-522 : 1994	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 522: TWISTED PAIR CLASS 1; PHYSICAL LAYER
BS ISO 9000-2:1997	Quality management and quality assurance standards Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
UNI EN 1654 : 1999	COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS
CSA ISO 9004-2 : 0	QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 2: GUIDELINES FOR SERVICES
BS ISO 8009-1:1997	Reusable rubber contraceptive diaphragms Classification, sampling and requirements
EN 100114-1 : 1996	RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURES - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION
BS 5750-8:1991	Quality systems Guide to quality management and quality systems elements for services
BS EN 61207-3:2002	Expression of performance of gas analyzers Paramagnetic oxygen analyzers
UNI EN 1652 : 1999	COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES
ASTM E 2066 : 2000 : R2007	Standard Guide for Validation of Laboratory Information Management Systems (Withdrawn 2015)
BS EN 45510-2-9:2008	Guide for procurement of power station equipment Electrical equipment. Cabling systems
UNI EN 15644 : 2009	TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
ASTM D 6787/D6787M : 2002 : R2017	Standard Specification for Repositionable Note Pad
PD 3542:1991	The role of standards in company quality management
BS ISO 14654:1999	Epoxy-coated steel for the reinforcement of concrete
DD ENV 61111:2002	Matting of insulating material for electrical purposes
DD ENV 61112:2002	Blankets of insulating material for electrical purposes
EN 45510-4-2:1999	Guide for procurement of power station equipment - Part 4: Boiler auxiliaries - Section 2: Gas-air, steam-air and gas-gas heaters
ASTM E 1884 : 1997	Standard Guide for General Requirements for Bodies Operating Assessment and Certification/Registration of Quality Systems (Withdrawn 2004)
EN 45510-6-7:1998	Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters
BS ISO 21927-8:2017	Smoke and heat control systems Smoke control dampers
97/703009 DC : 0	PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C
02/121978 DC : DRAFT APR 2002	ISO/DIS 23711 - ELASTOMERIC SEALS - REQUIREMENTS FOR MATERIALS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - THERMOPLASTIC ELASTOMERS
EN 45510-6-1:1998	Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries - Deaerators
UNI EN 12101-7 : 2011	SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS
EN 45510-6-3:1998	Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries - Condenser plant
UNI EN 15650 : 2010	VENTILATION FOR BUILDINGS - FIRE DAMPERS
EN 45510-8-1:1998	Guide for procurement of power station equipment - Part 8-1: Control and instrumentation
DD ENV 13459-2:1999	Road marking. Materials. Quality control Guidelines for preparing quality plans for materials application
EN 45510-5-1:1998	Guide for procurement of power station equipment - Part 5-1: Steam turbines
96/108457 DC : DRAFT NOV 1996	PREN 12650-2 - BUILDING HARDWARE - POWERED PEDESTRIAN DOORS - PART 2: SAFETY AT POWERED PEDESTRIAN DOORS
UNI EN 1492-1 : 2009	TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES
04/30112025 DC : DRAFT APR 2004	ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
EN 45510-5-4:1998	Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage pumps and pump-turbines
EN 45510-5-2:1998	Guide for procurement of power station equipment - Part 5-2: Gas turbines
UNI EN ISO 10472-1 : 2009	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
BS ISO 21927-7:2017	Smoke and heat control systems Smoke ducts sections
API 683 : 1993	QUALITY IMPROVEMENT MANUAL FOR MECHANICAL EQUIPMENT IN PETROLEUM, CHEMICAL, AND GAS INDUSTRIES
EN 45510-4-9:1999	Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers
07/30162629 DC : 0	BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS
EN 45510-2-9:2008	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS
EN 45510-1:1997	Guide for procurement of power station equipment - Part 1: Common clauses
UNI EN 1677-5 : 2009	COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
UNI CEI EN 45510-4-10 : 2000	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - FLUE GAS DENITRIFICATION (DE-NOX) PLANT
UNI EN 74-2 : 2009	COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
UNI EN 12101-8 : 2011	SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS
ASTM E 2066 : 2000	Standard Guide for Validation of Laboratory Information Management Systems
I.S. EN 74-2:2008	COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
99/123581 DC : DRAFT OCT 1999	ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS
00/709747 DC : 0	ISO/DIS 16049-2 - AIR CARGO EQUIPMENT - RESTRAINT STRAPS - PART 2: UTILIZATION GUIDELINES AND LASHING CALCULATIONS
94/110814 DC : DRAFT JAN 1995	ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS
EN 45510-6-2:1998	Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries - Feedwater heaters
96/108458 DC : DRAFT NOV 1996	PREN 12650-1 - BUILDING HARDWARE - POWERED PEDESTRIAN DOORS - PART 1: PRODUCT REQUIREMENTS AND TEST METHODS
99/201503 DC : 0	IEC 61479 ED.1 - LIVE WORKING - CONDUCTOR COVERS (LINE HOSES) OR INSULATING MATERIAL FOR ELECTRICAL PURPOSES
03/318309 DC : DRAFT OCT 2003	IEC 61196-1-1 - COAXIAL COMMUNICATION CABLES - PART 1-1: CAPABILITY APPROVAL FOR COAXIAL COMMUNICATION CABLES - GENERIC SPECIFICATION
00/243316 DC : DRAFT JUL 2000	IEC 60494-1 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINE VEHICLES
I.S. EN 2000:1992	AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - APPROVAL OF THE QUALITY SYSTEM OF MANUFACTURERS
I.S. CR ISO 17663:2001	WELDING - GUIDELINES FOR QUALITY REQUIREMENTS FOR HEAT TREATMENT IN CONNECTION WITH WELDING AND ALLIED PROCESSES
EN 1254-5:1998	Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
DIN EN 1254-4:1998-03	Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends
EN 1254-2:1998	Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
BS EN 1254-3:1998	Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with plastics pipes
ISO 9004-1:1994	Quality management and quality system elements Part 1: Guidelines
CSA C61400-2 : 2008 : R2013	WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
CSA CEI/IEC 1258 : 1998	GUIDELINES FOR THE DEVELOPMENT AND USE OF MEDICAL ELECTRICAL EQUIPMENT EDUCATIONAL MATERIALS
CSA ISO 11134 : 0	STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS FOR VALIDATION AND ROUTINE CONTROL - INDUSTRIAL MOIST HEAT STERILIZATION
DIN EN 12101-8:2011-08	Smoke and heat control systems - Part 8: Smoke control dampers
DIN EN ISO 10472-1:2009-10	Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
DIN EN 12101-7:2011-08	Smoke and heat control systems - Part 7: Smoke duct sections
UNE-EN 12101-7:2013	Smoke and heat control systems - Part 7: Smoke duct sections
EN 45510-2-9 : 2008	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS
EN 61854:1998	Overhead lines - Requirements and tests for spacers
SAE AS 4959 : 2018	BOLTS AND SCREWS, STEEL, UNS S66286 TENSILE STRENGTH 140 KSI 1650 DEGREES F SOLUTION HEAT TREATMENT AGED BEFORE FILLET AND THREAD ROLLING PROCUREMENT SPECIFICATION
EN 61481:2001/A2:2005	LIVE WORKING - PORTABLE PHASE COMPARATORS FOR USE ON VOLTAGES FROM 1 KV TO 36 KV A.C.
DIN ISO 2859-3:2007-10	SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 3: SKIP-LOT SAMPLING PROCEDURES
EN 74-2:2008	Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
BS EN 13085:2001	Wallcoverings. Specification for cork rolls
BS EN 60870-5-6:2009	Marine energy. Wave, tidal and other water current converters Scale testing of tidal stream energy systems
EN 1758:1997	Copper and copper alloys - Strip for lead frames
BS EN 60966-1:1999	Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods
EN ISO 4516 : 2002	METALLIC AND OTHER INORGANIC COATINGS - VICKERS AND KNOOP MICROHARDNESS TESTS
BS EN 12322:1999	In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media
IEC WT 01:2001	IEC System for Conformity Testing and Certification of Wind Turbines - Rules and procedures
EN 1457:1999/A1:2002/AC:2007	CHIMNEYS - CLAY/CERAMIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
EN ISO 13488 : 2000	QUALITY SYSTEMS - MEDICAL DEVICES - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF EN ISO 9002
EN ISO 10472-1:2008	Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
EN ISO 9004-1 : 1994	QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS
EN ISO 10007 : 1996	QUALITY MANAGEMENT - GUIDELINES FOR CONFIGURATION MANAGEMENT
BS EN 10242:1995	Threaded pipe fittings in malleable cast iron
EN 1652:1997/AC:2003	COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES
EN 1653:1997/A1:2000	COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS
EN 1492-2:2000+A1:2008	Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use
EN ISO 8230 : 1997	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
EN 15644:2008	Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements
EN ISO 9000-1 : 1994	QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 1: GUIDELINES FOR SELECTION AND USE (ISO 9000-1:1994)
EN 12322:1999/A1:2001	IN VITRO DIAGNOSTIC MEDICAL DEVICES - CULTURE MEDIA FOR MICROBIOLOGY - PERFORMANCE CRITERIA FOR CULTURE MEDIA
IEC 61209:1999	Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results
EN ISO/IEC 15416:2001	Information technology - Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols (ISO/IEC 15416:2000)
BS EN 12781:2001	Wallcoverings. Specification for cork panels
EN 3207 : 1998	AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION
EN 1492-1:2000+A1:2008	Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
BS 5750-4:1990	Quality systems Guide to the use of BS 5750:Part 1 \'Specification for design/development, production, installation and servicing\', Part 2 \'Specification for production and installation\' and Part 3 \'Specification for final inspection and test\'
EN 12569:1999/AC:2000	INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS
EN 2000:1991	Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers
EN 1654:1997/AC:2003	COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS
EN ISO 9003:1994/AC:1997	QUALITY SYSTEMS - SPECIFICATION FOR FINAL INSPECTION AND TEST
UNE-EN 15650:2010	Ventilation for buildings - Fire dampers
EN 15650:2010	Ventilation for buildings - Fire dampers
DIN EN 9000-1:2000-09 (Draft)	AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 1: REQUIREMENTS APPLICABLE TO SUPPLIERS
I.S. EN 45012:1998	GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS
I.S. EN ISO 8230:1998	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
DIN ISO 13411:1996-12 (Draft)	AEROSPACE - AIRFRAME ROLLING BEARINGS - NEEDLE ROLLER, NEEDLE TRACK ROLLER AND CYLINDRICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION
EN 1254-4:1998/AC:1999	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
EN 1254-1:1998	Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
BS EN 1254-5:1998	Copper and copper alloys. Plumbing fittings Fittings with short ends for capillary brazing to copper tubes
ISO 9000-2:1997	Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
I.S. EN 556-1:2002	STERILISATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED STERILE - PART 1: REQUIREMENTS FOR TERMINALLY STERILISED MEDICAL DEVICES
CSA C61400-2 : 2008 : R2018	WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
CSA C62155:2006	HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
CSA C62155 : 2006 : R2015	HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
EN ISO 14922-1:1999	Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999)
EN ISO 14922-3:1999	Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999)
UNE-EN 12101-8:2015	Smoke and heat control systems - Part 8: Smoke control dampers
ENV 50232 : 1997	AVIATION GROUND LIGHTING ELECTRICAL INSTALLATION - ISOLATING TRANSFORMER: EQUIPMENT SPECIFICATIONS AND TESTS
IEC 61192-1:2003	Workmanship requirements for soldered electronic assemblies - Part 1: General
CR 14245:2001	Guidelines for the application of EN 197-2 "Conformity Evaluation"
DIN EN ISO 4516:2002-10	Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002)
BS EN 556-1:2001	Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Part 1. Requirements for terminally sterilized medical devices
EN 61897:1998	Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers
SAE AS 7115 : 2017	NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ELASTOMER SEALS
BS EN 74-2:2008	Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures
EN 45510-4-2 : 1999	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - BOILER AUXILIARIES - GAS-AIR, STEAM AIR AND GAS-GAS HEATERS
EN 45510-8-1:1998	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 8-1: CONTROL AND INSTRUMENTATION
SAE J 2911 : 2017	PROCEDURE FOR CERTIFICATION THAT REQUIREMENTS FOR MOBILE AIR CONDITIONING SYSTEM COMPONENTS, SERVICE EQUIPMENT, AND SERVICE TECHNICIAN TRAINING MEET SAE J STANDARDS
EN 61243-2:1997/A2:2002	LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C.
EN 61192-2:2003	Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies
EN 1074-1:2000	Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements
EN 13380:2001	General requirements for components used for renovation and repair of drain and sewer systems outside buildings
IEC 61189-3:2007	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
EN 61325:1995	Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria
EN 45510-6-1 : 1998	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-1: TURBINE AUXILIARIES - DEAERATORS
EN 45510-6-7 : 1998	Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries - Moisture separator reheaters
EN 12101-8:2011	Smoke and heat control systems - Part 8: Smoke control dampers
EN 1065:1998	Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests
EN 45510-6-3 : 1998	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-3: TURBINE AUXILIARIES - CONDENSER PLANT
EN 45510-5-1 : 1998	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 5-1: STEAM TURBINES
IEC 61190-1-1:2002	Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly
EN 61192-1:2003	Workmanship requirements for soldered electronic assemblies - Part 1: General
EN 45510-4-9 : 1999	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-9: BOILER AUXILIARIES - SOOTBLOWERS
SAE ARP 5595 : 2017	CARGO RESTRAINT STRAPS - UTILIZATION GUIDELINES
BS EN 12569:1999	Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests
DIN EN 12890 : 2002-05	FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
EN 13085:2001	Wallcoverings - Specification for cork rolls
DIN EN 12279:2005-12	GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS
SAE AS 7200/1 : 2017	NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) - AUDIT AND INSPECTION PROCEDURES AND CHECKLISTS FOR THE SEALANT MANUFACTURERS ACCREDITATION PROGRAM
BS EN 1254-2:1998	Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes
IEC TR 61334-1-2:1997	Distribution automation using distribution line carrier systems - Part 1-2: General considerations - Guide for specification
IEC 60870-5-6:2006	Telecontrol equipment and systems - Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards
EN 61207-3:2002	Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
EN 60746-2:2003	Expression of performance of electrochemical analyzers - Part 2: pH value
CLC/TS 61111:2006	Matting of insulating material for electrical purposes
EN 61190-1-1:2002	Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly
EN 61189-3:2008	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
IEC 61192-2:2003	Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies
XP PREN 2943 : 1992 XP	AEROSPACE SERIES - WIRE THREAD INSERTS, PREVAILING TORQUE (SELF-LOCKING) - TECHNICAL SPECIFICATION
PREN 3152 : 200P1	AEROSPACE SERIES - PROPULSION STANDARDS PARTS NUTS, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA/425 DEGREES C - TECHNICAL SPECIFICATION
PREN 3389 : 200P1	AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA/730 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
BS 5781-1(1992) : AMD 8147	QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT
PREN 9000-3 : 200P2	AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 3: REQUIREMENTS APPLICABLE TO STOCKISTS-DISTRIBUTORS
I.S. EN 1092-2:1997	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 2: CAST IRON FLANGES
API 1512 : 1995	PETROLEUM TEST LABORATORY ACCREDITATION PROGRAM
BS 4778-1:1987	Quality vocabulary International terms
PREN 3388 : 200P1	AEROSPACE SERIES - FASTENERS, EXTERNALLY THREADED, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C - MANUFACTURING METHOD OPTIONAL - TECHNICAL SPECIFICATION
XP PREN 9000-1 : 1999 XP	AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 1: REQUIREMENTS APPLICABLE TO SUPPLIERS
TR 3040-1 : 5	AEROSPACE SERIES - QUALITY ASSURANCE - EN AEROSPACE PRODUCTS - PART 1 - LIST OF APPROVED MANUFACTURERS
PD CR 14245:2001	Guidelines for the application of EN 197-2. Conformity Evaluation
PREN 9000-2 : 200P2	AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 2: REQUIREMENTS APPLICABLE TO MAINTENANCE ORGANIZATIONS
XP PREN 9000-2 : 1999 XP	AEROSPACE SERIES - AEROSPACE INDUSTRY QUALITY SYSTEM - PART 2: REQUIREMENTS APPLICABLE TO MAINTENANCE ORGANIZATIONS

ISO 10011-3:1991	Guidelines for auditing quality systems Part 3: Management of audit programmes
ISO 10011-1:1990	Guidelines for auditing quality systems Part 1: Auditing
ISO 10013:1995	Guidelines for developing quality manuals
ISO 8402:1994	Quality management and quality assurance — Vocabulary
ISO 9000-2:1997	Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
ISO/TR 13425:2006	Guidelines for the selection of statistical methods in standardization and specification
ISO 9001:2015	Quality management systems — Requirements
ISO 9003:1994	Quality systems Model for quality assurance in final inspection and test
ISO 10012-1:1992	Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment
ISO 9000-1:1994	Quality management and quality assurance standards — Part 1: Guidelines for selection and use
ISO 9000-3:1997	Quality management and quality assurance standards Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software
ISO 10011-2:1991	Guidelines for auditing quality systems — Part 2: Qualification criteria for quality systems auditors