• There are no items in your cart

ISO Guide 34:2009

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

General requirements for the competence of reference material producers
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

03-19-2019

Language(s)

English, Russian, French

Published date

11-20-2009

Guide 34:2009 specifies general requirements in accordance with which a reference material producer has to demonstrate that it operates, if it is to be recognized as competent to carry out the production of reference materials.

Guide 34:2009 is intended for the use by reference material producers in the development and implementation of their management system for quality, administrative and technical operations. Reference material customers, regulatory authorities and accreditation bodies may also use it in confirming and recognizing the competence of reference material producers.

Guide 34:2009 is not intended to be used as the basis for conformity assessment by certification bodies.

Guide 34:2009 sets out the management system requirements in accordance with which reference materials shall be produced. It is intended to be used as part of a reference material producer's general quality assurance (QA) procedures.

Guide 34:2009 covers the production of certified and non-certified reference materials. For non-certified reference materials, the production requirements are less stringent than for certified reference materials. The minimum requirements for the production of non-certified reference materials are specified throughout the Guide.

DocumentType
Guide
Pages
34
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

Standards Relationship
FD ISO GUIDE 34 : 2010 FD Identical
NEN NPR ISO GUIDE 34 : 2009 Identical
SAC GB/T 15000.7 : 2001 Identical
PD ISO Guide 34:2009 Identical
PD 6532-5:1997 Identical
SANS 607 : 2ED 2011 Identical
UNE-ISO GUIA 34:2014 IN Identical

I.S. EN ISO 6142-1:2015 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES (ISO 6142-1:2015)
DIN EN ISO 6142-1 E : 2015 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 61421:2015)
10/30215322 DC : 0 BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION
05/30136954 DC : 0 EN 15309 - CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE
DIN EN ISO/IEC 17043 E : 2010 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING
ISO/TR 11773:2013 Global distribution of reference materials
BS EN ISO/IEC 17043:2010 Conformity assessment. General requirements for proficiency testing
BS EN 15309:2007 Characterization of waste and soil. Determination of elemental composition by X-ray fluorescence
11/30199166 DC : 0 BS ISO 11952 - SURFACE CHEMICAL ANALYSIS - SCANNING PROBE MICROSCOPY - DETERMINATION OF GEOMETRIC QUANTITIES USING SPM - CALIBRATION OF MEASURING SYSTEMS
OIML D 18 : 2008 THE USE OF CERTIFIED REFERENCE MATERIALS IN FIELDS COVERED BY METROLOGICAL CONTROL EXERCISED BY NATIONAL SERVICES OF LEGAL METROLOGY. BASIC PRINCIPLES
13/30272291 DC : 0 BS ISO 18227 - SOIL QUALITY - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE
11/30214536 DC : 0 BS EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD
03/300854 DC : DRAFT JAN 2003 ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD
07/30157023 DC : 0 BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
08/30182372 DC : DRAFT JULY 2008 BS EN 15842 - FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
ECA ILAC P10 : 2013 ILAC POLICY ON TRACEABILITY OF MEASUREMENT RESULTS
BS EN ISO 6142-1:2015 Gas analysis. Preparation of calibration gas mixtures Gravimetric method for Class I mixtures
ISO Guide 31:2015 Reference materials — Contents of certificates, labels and accompanying documentation
BS ISO 18227:2014 Soil quality. Determination of elemental composition by X-ray fluorescence
ASTM E 1834 : 2011 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
ASTM E 2437 : 2005 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2014)
PREN ISO 13736 : DRAFT 2011 DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD
CEI UNI 70099 : 2010 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
UNE-EN ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010)
CEI UNI EN ISO/IEC 17025 : 2008 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
ASTM D 93 : 2016-07 TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
ASTM E 925 : 2009 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E 2594 : 2009 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
I.S. EN ISO 15194:2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
EN ISO 5667-3:2012 Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012)
ASTM E 2594 : 2009 : R2014 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
ASTM E 2371 : 2013 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
DIN EN ISO 17932:2011-12 Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011)
DIN EN ISO 6974-2 E : 2012 NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012)
DIN EN ISO 10993-12 E : 2012 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012)
ISO 6974-1:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition
BS EN ISO 10993-12:2012 Biological evaluation of medical devices Sample preparation and reference materials
ISO/IEC 17043:2010 Conformity assessment — General requirements for proficiency testing
UNE-EN ISO 13736:2013 Determination of flash point - Abel closed-cup method (ISO 13736:2013)
DIN EN ISO 13366-2:2007-01 Milk - Enumeration of somatic cells - Part 2: Guidance on the operation of fluoro-opto-electronic counters (ISO 13366-2:2006)
EN ISO 2719:2016 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
EN ISO 13366-2:2006/AC:2007 MILK - ENUMERATION OF SOMATIC CELLS - PART 2: GUIDANCE ON THE OPERATION OF FLUORO-OPTO-ELECTRONIC COUNTERS
DIN EN ISO 148-3:2017-04 METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016)
EN ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016)
UNI EN ISO 10993-12 : 2012 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS
ISO/TR 79:2015 Reference materials - Examples of reference materials for qualitative properties
PD ISO/TR 13014:2012 Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
10/30201950 DC : 0 BS EN ISO 5667-3 - WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES
12/30237514 DC : 0 BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS
BS ISO 14606:2015 Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials
09/30179503 DC : DRAFT FEB 2009 BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS GIVING A PERIODIC DIFFRACTION PATTERN
UNI EN 15842 : 2010 FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
10/30203803 DC : 0 BS ISO 6974-2 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS
BS EN ISO 15193:2009 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures
OIML V 2-200 : 2012 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
03/300855 DC : DRAFT JAN 2003 ISO 3680 - DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD
DIN EN 15309 E : 2007 CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE
BS 2000-524(2004) : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-524: DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD
14/30250844 DC : 0 BS EN ISO 6142-1 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES
UNI CEN/TR 10317 : 2009 EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION
DIN EN ISO 6142-1:2015-12 GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 6142-1:2015)
DIN EN 15842:2010-06 FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
PD ISO GUIDE 33:2015 Reference materials. Good practice in using reference materials
BS ISO 13322-1:2014 Particle size analysis. Image analysis methods Static image analysis methods
BS 2000-170(1998) : 1998 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND OTHER LIQUIDS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD
BS ISO 16700:2004 Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification
ISO 13322-1:2014 Particle size analysis — Image analysis methods — Part 1: Static image analysis methods
UNI EN ISO 5667-3 : 2013 WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES
I.S. EN ISO 17932:2011 PALM OIL - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) AND CAROTENE CONTENT (ISO 17932:2011)
NF ISO 16700 : 2006 MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION
I.S. EN ISO 148-3:2016 METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016)
BS 2000-34(2016) : 2016 DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016)
EN ISO 2592:2017 Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017)
UNI EN ISO 13736 : 2013 DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD
ASTM E 925 : 2009 : R2014 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
DIN EN ISO 10993-12:2012-10 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012)
DIN EN ISO 6974-1:2012-11 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012)
DIN EN ISO 6974-2:2012-11 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012)
BS EN ISO 13366-2:2006 Milk. Enumeration of somatic cells Guidance on the operation of fluoro-opto-electronic counters
I.S. EN ISO 6974-1:2012 NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012)
I.S. EN ISO 10723:2012 NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012)
I.S. EN ISO 13736:2013 DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013)
I.S. EN ISO 13366-2:2006 MILK - ENUMERATION OF SOMATIC CELLS - PART 2: GUIDANCE ON THE OPERATION OF FLUORO-OPTO-ELECTRONIC COUNTERS
I.S. EN ISO 6974-2:2012 NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012)
DIN EN ISO 10723:2013-04 NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012)
I.S. EN ISO 10993-12:2012 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012)
I.S. EN ISO 2719:2016 DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016)
I.S. EN ISO 3679:2015 DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015)
PD 6532-2:2000 Reference materials. Guide to the contents of certificates of reference materials Guide to the contents of certificates and labels of reference materials
17/30346182 DC : 0 BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS HAVING PERIODIC STRUCTURES
ECA ILAC P14 : 2013 ILAC POLICY FOR UNCERTAINTY IN CALIBRATION
BS EN ISO 2592:2017 Petroleum and related products. Determination of flash and fire points. Cleveland open cup method
EN ISO 13736:2013 Determination of flash point - Abel closed-cup method (ISO 13736:2013)
I.S. EN ISO 3680:2004 DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD
BS EN 16682:2017 Conservation of cultural heritage. Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage
DIN EN 15842 E : 2010 FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
PD ISO/TR 79:2015 Reference materials. Examples of reference materials for qualitative properties
03/317065 DC : DRAFT NOV 2003 ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1
ISO Guide 32:1997 Calibration in analytical chemistry and use of certified reference materials
BS EN 15842:2010 Foodstuffs. Detection of food allergens. General considerations and validation of methods
BS 2000-523(2015) : 2015 DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD
15/30301302 DC : 0 BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD
UNE-ISO/IEC GUIA 99:2012 IN International vocabulary of metrology. Basics and general concepts and associated terms (VIM)
PD CEN/TR 10317:2014 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)
BIS IS/ISO/IEC 17025 : 2005 AMD 1 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
14/30296672 DC : 0 BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
ASTM E 3131 : 2017 Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders
S.R. CEN/TR 10317:2014 EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION (ECISS)
ISO Guide 30:2015 Reference materials Selected terms and definitions
ASTM D 7911 : 2014 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
UNI CEI EN ISO/IEC 17043 : 2010 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING
BS EN ISO 5667-3:2012 Water quality. Sampling Preservation and handling of water samples
DIN EN ISO 3679:2015-06 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
UNE-EN ISO 6974-2:2013 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012)
UNE-EN ISO 6974-1:2013 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012)
BS EN ISO 3680:2004 Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method
UNE-EN ISO 6142-1:2016 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015)
EN ISO 6974-2:2012 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012)
UNI EN ISO 6974-2 : 2012 NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS
UNI EN ISO 6974-1 : 2012 NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION
UNI EN ISO 15193 : 2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES
UNI EN ISO 10723 : 2013 NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS
UNE-EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016)
DIN EN ISO 148-3:2015-09 (Draft) METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016)
BS EN ISO 15194:2009 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation
I.S. EN ISO/IEC 17043:2010 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING
PD ISO/TR 11773:2013 Global distribution of reference materials
PD ISO/TR 16476:2016 Reference materials. Establishing and expressing metrological traceability of quantity values assigned to reference materials
12/30271500 DC : 0 BS ISO GUIDE 80 - GUIDANCE FOR IN-HOUSE PRODUCTION OF REFERENCE MATERIALS FOR QUALITY CONTROL (QCMS)
UNE-EN ISO 5667-3:2013 Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012)
ISO 11952:2014 Surface chemical analysis Scanning-probe microscopy Determination of geometric quantities using SPM: Calibration of measuring systems
DIN EN ISO 15194:2009-10 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
BS EN ISO 148-3:2016 Metallic materials. Charpy pendulum impact test Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
DIN EN 16682 E : 2017 CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
ISO/TR 16476:2016 Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials
CEN/TR 10317:2014 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)
I.S. EN 15842:2010 FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS
14/30316056 DC : 0 BS ISO/GUIDE 31 - REFERENCE MATERIALS - CONTENTS OF CERTIFICATES, LABELS AND ACCOMPANYING DOCUMENTATION
15/30317578 DC : 0 BS ISO 16700 - MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION
PD ISO GUIDE 30:2015 Reference materials. Selected terms and definitions
16/30325304 DC : 0 BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD
ISO 16700:2016 Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification
BS 2000-34(2002) : 2002 AMD 15248 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD
PREN 45001 : DRAFT 1997 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
ASTM D 6808 : 2002 : R2012 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
DIN EN ISO 15193:2009-10 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES
13/30285144 DC : 0 BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD
ISO Guide 80:2014 Guidance for the in-house preparation of quality control materials (QCMs)
04/30126703 DC : DRAFT DEC 2004 ISO 13366-2 - MILK - ENUMERATION OF SOMATIC CELLS - PART 2: ELECTRONIC PARTICLE COUNTER METHOD
09/30195571 DC : 0 BS EN ISO 12677 - CHEMICAL ANALYSIS OF REFRACTORY PRODUCTS BY X-RAY FLUORESCENCE (XRF) - FUSED CAST-BEAD METHOD
BS 2000-170(2013) : 2013 DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013)
BS 2000-36(2002) : 2002 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD
UNI CEI 70099 : 2008 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
DIN EN 16682:2016-01 (Draft) CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
I.S. EN ISO 2592:2017 PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017)
NF EN ISO 15194 : 2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
I.S. EN 16682:2017 CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
DIN EN ISO 5667-3:2013-03 WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012)
ASTM D 6808 : 2002 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
ASTM D 7345 : 2017 : REDLINE Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
I.S. EN ISO 5667-3:2012 WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012)
I.S. EN 15309:2007 CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE
ISO/TS 16195:2013 Nanotechnologies Guidance for developing representative test materials consisting of nano-objects in dry powder form
DIN EN ISO 13736:2013-08 Determination of flash point - Abel closed-cup method (ISO 13736:2013)
ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
BS EN ISO 17932:2011 Palm oil. Determination of the deterioration of bleachability index (DOBI) and carotene content
BS EN ISO 13736:2008 Determination of flash point. Abel closed-cup method
BS EN ISO 6974-2:2012 Natural gas. Determination of composition and associated uncertainty by gas chromatography Uncertainty calculations
ISO 17932:2011 Palm oil Determination of the deterioration of bleachability index (DOBI) and carotene content
ISO 6142-1:2015 Gas analysis Preparation of calibration gas mixtures Part 1: Gravimetric method for Class I mixtures
BS EN ISO 2719:2002 Determination of flash point. Pensky-Martens closed cup method
BS EN ISO 3679:2015 Determination of flash no-flash and flash point. Rapid equilibrium closed cup method
UNE-EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
UNE-EN ISO 10993-12:2013 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012)
ISO 10993-12:2012 Biological evaluation of medical devices Part 12: Sample preparation and reference materials
UNE-EN ISO 10723:2013 Natural gas - Performance evaluation for analytical systems (ISO 10723:2012)
ISO 10723:2012 Natural gas Performance evaluation for analytical systems
ISO 15193:2009 In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures
UNE-EN ISO 17932:2012 Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011)
ISO 6974-2:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations
BS EN ISO 6974-1:2012 Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition
ISO 3680:2004 Determination of flash/no flash Rapid equilibrium closed cup method
ISO 13366-2:2006 Milk Enumeration of somatic cells Part 2: Guidance on the operation of fluoro-opto-electronic counters
BS EN ISO 10723:2012 Natural gas. Performance evaluation for analytical systems
ISO 13736:2013 Determination of flash point Abel closed-cup method
UNE-EN ISO 2719:2017 Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016)
ISO 2719:2016 Determination of flash point Pensky-Martens closed cup method
DIN EN ISO/IEC 17043:2010-05 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010)
EN ISO 17932:2011 Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011)
EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009)
EN ISO 3679:2015 Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
EN ISO 10723:2012 Natural gas - Performance evaluation for analytical systems (ISO 10723:2012)
EN 16682:2017 Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage
EN 15309:2007 Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence
EN ISO 6142-1:2015 Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015)
EN ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010)
EN 15842:2010 Foodstuffs - Detection of food allergens - General considerations and validation of methods
EN ISO 6974-1:2012/AC:2012 NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012/COR 1:2012)
EN ISO 15194:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009)
EN ISO 3680:2004 Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)
EN ISO 1523:2002 Determination of flash point - Closed cup equilibrium method (ISO 1523:2002)
06/30138176 DC : 0 EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD
04/30105010 DC : DRAFT JUL 2004 ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD
DIN EN 15309:2007-08 Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence
ISO 18227:2014 Soil quality — Determination of elemental composition by X-ray fluorescence
UNI EN ISO 17932 : 2011 PALM OIL - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) AND CAROTENE CONTENT
BS 2000-523(2004) : 2004 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-523: DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD
ISO 14606:2015 Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials
ISO/TR 13014:2012 Nanotechnologies Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
CEI UNI EN ISO/IEC 17043 : 2011 CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING
EN ISO 10993-12:2012 Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012)
97/402277 DC : DRAFT APR 1997 PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
PD ISO GUIDE 31:2015 Reference materials. Contents of certificates, labels and accompanying documentation
UNI EN ISO 15194 : 2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION
ISO Guide 33:2015 Reference materials Good practice in using reference materials
ANSI/AAMI/ISO 10993-12:2012 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS
I.S. EN ISO 15193:2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES
ASTM D 6808 : 2002 : R2007 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
ISO 15194:2009 In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation
DIN EN ISO 6974-1 E : 2012 NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012)
BS EN ISO 1523:2002 Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method
ISO 148-3:2016 Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
DIN EN ISO 3680:2004-07 DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD

ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO/IEC 17000:2004 Conformity assessment Vocabulary and general principles
ISO Guide 32:1997 Calibration in analytical chemistry and use of certified reference materials
CLSI EP14 A2 : 2ED 2005 EVALUATION OF MATRIX EFFECTS
ISO 15189:2012 Medical laboratories — Requirements for quality and competence
ISO Guide 33:2015 Reference materials Good practice in using reference materials
ISO Guide 35:2017 Reference materials Guidance for characterization and assessment of homogeneity and stability
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
ISO 17511:2003 In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials
ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
ISO Guide 30:2015 Reference materials Selected terms and definitions
CLSI EP32 R : 1ED 2006 METROLOGICAL TRACEABILITY AND ITS IMPLEMENTATION
ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment
ISO 9001:2015 Quality management systems — Requirements
CLSI C53 P : 1ED 2008 CHARACTERIZATION AND QUALIFICATION OF COMMUTABLE REFERENCE MATERIALS FOR LABORATORY MEDICINE
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
ECA ILAC G12 : 2000 GUIDELINES FOR THE REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIALS PRODUCERS
ISO Guide 31:2015 Reference materials — Contents of certificates, labels and accompanying documentation
ECA ILAC G24 : 2007 GUIDELINES FOR THE DETERMINATION OF CALIBRATION INTERVALS OF MEASURING INSTRUMENTS
ECA ILAC P10 : 2013 ILAC POLICY ON TRACEABILITY OF MEASUREMENT RESULTS
OIML D 10 : 2007 GUIDELINES FOR THE DETERMINATION OF CALIBRATION INTERVALS OF MEASURING INSTRUMENTS
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
ISO 3534-1:2006 Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.