ISO/TR 18532:2009
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
04-20-2009
ISO/TR 18532:2009 describes a broad range of statistical methods applicable to the management, control and improvement of processes.
DocumentType |
Technical Report
|
Pages |
190
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
SANS SATR 18532 : 1ED 2011 | Identical |
UNI ISO/TR 18532 : 2010 | Identical |
NEN NPR ISO/TR 18532 : 2009 | Identical |
SANS SATR 18532:2011(R2017) | Identical |
BS ISO 7870-8:2017 | Control charts Charting techniques for short runs and small mixed batches |
ISO 7870-8:2017 | Control charts — Part 8: Charting techniques for short runs and small mixed batches |
UNI ISO 13053-2 : 2014 | QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
BS ISO 13053-2:2011 | Quantitative methods in process improvement. Six Sigma Tools and techniques |
UNI ISO 11462-2 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
ISO 11462-2:2010 | Guidelines for implementation of statistical process control (SPC) — Part 2: Catalogue of tools and techniques |
ISO 13053-2:2011 | Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques |
UNE-ISO 13053-2:2012 | Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques |
ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
ISO Guide 32:1997 | Calibration in analytical chemistry and use of certified reference materials |
ISO 3951-4:2011 | Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels |
ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
ISO 2859-4:2002 | Sampling procedures for inspection by attributes Part 4: Procedures for assessment of declared quality levels |
ISO 10725:2000 | Acceptance sampling plans and procedures for the inspection of bulk materials |
ISO 2859-3:2005 | Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures |
ISO 7873:1993 | Control charts for arithmetic average with warning limits |
ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
ISO 2854:1976 | Statistical interpretation of data — Techniques of estimation and tests relating to means and variances |
ISO 16269-7:2001 | Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals |
IEC 61649:2008 | Weibull analysis |
ISO 3082:2017 | Iron ores — Sampling and sample preparation procedures |
ISO/TR 9007:1987 | Information processing systems Concepts and terminology for the conceptual schema and the information base |
MIL-STD-1235 Revision C:1988 | SINGLE AND MULTILEVEL CONTINUOUS SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES FUNCTIONAL CURVES OF THE CONTINUOUS SAMPLING PLANS |
ISO/TS 21749:2005 | Measurement uncertainty for metrological applications — Repeated measurements and nested experiments |
ISO 7870-1:2014 | Control charts Part 1: General guidelines |
ISO/TR 22971:2005 | Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
ISO/TS 16949:2009 | Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
EN 12603:2002 | Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data |
ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
ISO Guide 33:2015 | Reference materials Good practice in using reference materials |
ISO 10014:2006 | Quality management Guidelines for realizing financial and economic benefits |
ISO 11648-2:2001 | Statistical aspects of sampling from bulk materials — Part 2: Sampling of particulate materials |
MIL-STD-1916 Base Document:1996 | DOD PREFERRED METHODS FOR ACCEPTANCE OF PRODUCT |
ISO 10576-1:2003 | Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles |
ISO 2859-2:1985 | Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
ISO Guide 35:2017 | Reference materials Guidance for characterization and assessment of homogeneity and stability |
ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
ISO 11095:1996 | Linear calibration using reference materials |
ISO 11648-1:2003 | Statistical aspects of sampling from bulk materials — Part 1: General principles |
ISO 3084:1998 | Iron ores — Experimental methods for evaluation of quality variation |
ISO 14560:2004 | Acceptance sampling procedures by attributes Specified quality levels in nonconforming items per million |
ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
ISO 8422:2006 | Sequential sampling plans for inspection by attributes |
ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
ISO/TR 22514-4:2007 | Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
ISO 3301:1975 | Statistical interpretation of data — Comparison of two means in the case of paired observations |
ISO 3534-2:2006 | Statistics Vocabulary and symbols Part 2: Applied statistics |
ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
ISO/TR 13425:2006 | Guidelines for the selection of statistical methods in standardization and specification |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
ISO 22514-3:2008 | Statistical methods in process management Capability and performance Part 3: Machine performance studies for measured data on discrete parts |
ISO 7966:1993 | Acceptance control charts |
ISO 8423:2008 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
ISO 2859-10:2006 | Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
ISO 3494:1976 | Statistical interpretation of data — Power of tests relating to means and variances |
ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
ISO 3951-3:2007 | Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 3534-3:2013 | Statistics — Vocabulary and symbols — Part 3: Design of experiments |
ISO 18414:2006 | Acceptance sampling procedures by attributes Accept-zero sampling system based on credit principle for controlling outgoing quality |
ISO 5479:1997 | Statistical interpretation of data — Tests for departure from the normal distribution |
ISO 16269-8:2004 | Statistical interpretation of data — Part 8: Determination of prediction intervals |
ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC |
EN 12326-1:2014 | SLATE AND STONE FOR DISCONTINUOUS ROOFING AND EXTERNAL CLADDING - PART 1: SPECIFICATIONS FOR SLATE AND CARBONATE SLATE |
ISO 3951-5:2006 | Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
ISO/TR 7871:1997 | Cumulative sum charts Guidance on quality control and data analysis using CUSUM techniques |
ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
ISO 3951-2:2013 | Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.