JIS C 1602:1995
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
12-23-2016
English, Japanese
02-15-2008
This Japanese Industrial Standard specifies thermocouples to be used for temperature measurement.
DocumentType |
Standard
|
Pages |
60
|
PublisherName |
Japanese Standards Association
|
Status |
Superseded
|
SupersededBy |
Reaffirmed 2011
JIS R 1401:1995 | Non-metallic Protection Tubes For Thermocouples |
JIS Z 8703:1983 | Standard atmospheric conditions for testing |
JIS B 7507:1993 | Vernier, dial and digital callipers |
JIS R 1402:1987 | Non-metallic insulating tubes for thermocouples |
JIS Z 8710:1993 | Temperature measurement - General requirement |
JIS C 0911:1984 | Vibration Testing Procedure For Electric Machines And Equipment |
JIS C 1302:2002 | Insulation resistance testers |
JIS Z 8704:1993 | Temperature measurement - Electrical methods |
JIS B 7502:1994 | Micrometer callipers |
JIS C 1610:1995 | Extension and compensating cables for thermocouples |
JIS A 6901:2005 | Gypsum Boards |
JIS C 2570:1998 | Directly heated negative temperature coefficient thermistors |
JIS T 8020:2005 | Protective clothing - Protection against heat and flame - Method of test: Evaluation of material and material assemblies when exposed to a source of radiant heat |
JIS R 2251-3:2007 | Test Methods For Thermal Conductivity Of Refractory Materials - Part 3: Stationary Heat Flow Method |
JIS Z 4614:1993 | Source container of measuring instrument utilizing ionizing radiation |
JIS R 1658:2008 | Testing method for bending fatigue of fine ceramics at elevated temperature |
JIS R 3103-2:2001 | Viscosity And Viscometric Fixed Points Of Glass - Part 2: Determination Of Annealing Point And Strain Point By Fiber Elongation |
JIS H 7851:2005 | Testing method for heat resistance under temperature gradient |
JIS A 1302:1994 | Method of fire test for noncombustible structural parts of buildings |
JIS R 2657:1995 | Testing Method For Spalling Of Refractory Bricks And Insulating Fire Bricks |
JIS A 9401:2007 | Recycled plastics medial strip block |
JIS E 2002:2001 | Electric traction overhead lines - Fittings - Test methods |
JIS K 2541-3:2003 | Crude oil and petroleum products -- Determination of sulfur content Part 3: Quartz-tube combustion method (Air method) |
JIS T 8021:2005 | Protective clothing against heat and flame - Determination of heat transmission on exposure to flame |
JIS K 3351:1995 | Glycerines For Industrial Use |
JIS A 9510:2009 | Inorganic porous thermal insulation materials |
JIS H 7405:1993 | Test method for tensile properties of fiber reinforced metals |
JIS K 0050:2005 | General rules for chemical analysis |
JIS C 8108:2008 | Ballasts for fluorescent lamps |
JIS C 1211:1995 | Alternating-current watt-hour meters (for direct connection) |
JIS B 8341:1995 | Displace Compressors - Test Methods |
JIS R 2207-3:2007 | Test methods for thermal expansion of refractory products -- Part 3: Contact method using rod test piece Part 3: Contact method using rod test piece |
JIS S 2093:1996 | Test Methods Of Gas Burning Appliances For Domestic Use |
JIS C 60068-3-6:2008 | Environmental Testing - Part 3-6: Supporting Documentation And Guidance - Confirmation Of The Performance Of Temperature/humidity Chambers |
JIS R 1802:2005 | Methods For Surface Temperature Measurement Of Far Infrared Heaters By Thermocouples |
JIS R 2658:1995 | Testing Method For Compressive Creep Of Refractory Bricks |
JIS H 7903:2008 | Method For Thermal Conductivity Test Of Porous Metals |
JIS S 2147:1998 | Portable cookers attached to liquefied petroleum gas cylinder |
JIS C 2161:1997 | Test methods of coating powders for electrical insulation |
JIS B 8341:2008 | Displacement Compressors - Acceptance Tests |
JIS A 1412-1:1999 | Test Method For Thermal Resistance And Related Properties Of Thermal Insulations - Guarded Hot Plate Apparatus |
JIS C 8117:2008 | AC supplied electronic ballasts for fluorescent lamps |
JIS C 8020:2005 | Method Of Calculation On Fluorescent Luminaire Efficacy Index |
JIS R 1612:2002 | Testing Method For Bending Creep Of Fine Ceramics |
JIS H 7501:2002 | Method for evaluation of tensile properties of metallic superplastic materials |
JIS C 1601:1983 | Indicating thermoelectric thermometers |
JIS C 60068-3-5:2006 | Environmental Testing - Part 3-5: Supporting Documentation And Guidance - Confirmation Of The Performance Of Temperature Chambers |
JIS R 1604:2008 | Testing Method For Flexural Strength (modulus Of Rupture) Of Fine Ceramics At Elevated Temperature |
JIS B 2712:2006 | Method Of Stress Relaxation Test For Thin Plates For Springs |
JIS C 1605:1995 | Mineral insulated thermocouples |
JIS TR R0001:2000 | Methods For Surface Temperature Measurement Of Far Infrared Heaters By Thermocouples |
JIS B 9951:1993 | Pressure Swing Adsorption Apparatus - Test Methods |
JIS S 2029:2002 | Plastics Table Wares |
JIS B 8416:1992 | Portable type oil burning space heaters for industrial use |
JIS B 7757:1995 | Forced air circulation oven type thermal accelerated aging testers |
JIS R 1606:1995 | Testing Methods For Tensile Strength Of High Performance Ceramics At Room And Elevated Temperature |
JIS B 8622:2002 | Absorption refrigerating machines |
JIS A 1412-3:1999 | Test Method For Thermal Resistance And Related Properties Of Thermal Insulations - Circular Pipe Apparatus |
JIS E 4015:1989 | Measuring Methods For Air Conditioning And Heating Temperature Of Railway Rolling Stock |
JIS R 3102:1995 | Testing Method For Average Linear Thermal Expansion Of Glass |
JIS R 2209:2007 | Testing method for refractoriness-under-load of refractory bricks |
JIS C 8364:2008 | Busways |
JIS C 8117:1992 | AC supplied electronic ballasts for fluorescent lamps |
JIS C 9335-2-6:2004 | Household and similar electrical appliances - Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
JIS C 7802:1999 | Method Of Measuring The Pinch Temperature Of Quartz Glass Lamps |
JIS R 1631:1998 | Test method for tensile creep of fine ceramics |
JIS TR K0006:2002 | Plastics - Determination Of The Thermal Properties In Between Room Temperature And Decomposition And/or Vaporization Temperature |
JIS C 8367:1997 | Electromechanical pressure type thermostats for household appliances |
JIS R 2251-2:2007 | Test Methods For Thermal Conductivity Of Refractory Materials - Part 2: Hot-wire Method (parallel) |
JIS M 8812:2004 | Coal and coke - Methods for proximate analysis |
JIS R 3251:1995 | Measuring Method Of The Liner Thermal Expansion Coefficient For Low Expansion Glass By Laser Interferometry |
JIS C 60695-11-2:2007 | Fire hazard testing Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance |
JIS S 3031:2002 | General Rules For Test Methods Of Oil Burning Appliances |
JIS Z 2285:2003 | Measuring Method Of Coefficient Of Linear Thermal Expansion Of Metallic Materials |
JIS A 1412-2:1999 | Test Method For Thermal Resistance And Related Properties Of Thermal Insulations - Heat Flow Meter Apparatus |
JIS T 1002:1992 | General rules of testing methods for safety of medical electrical equipment |
JIS M 0201:1974 | Testing method for effluents from coal preparation plant |
JIS B 8412:1981 | Combustion safety controllers for guntype oil burners |
JIS R 1618:2002 | Measuring Method Of Thermal Expansion Of Fine Ceramics By Thermomechanical Analysis |
JIS R 2207-1:2007 | Test methods for thermal expansion of refractory products Part 1: Non-contact method |
JIS K 7301:1995 | Testing methods for tolylene diisocyanate type prepolymers for thermosetting urethane elastomers |
JIS C 8911:1998 | Secondary reference crystalline solar cells |
JIS C 8931:1995 | Secondary Reference Amorphous Solar Cells |
JIS A 1304:1994 | Method of fire resistance test for structural parts of buildings |
JIS H 7502:2003 | Method for evaluation of compressive properties of metallic superplastic materials |
JIS R 1617:2002 | Testing Method For Fracture Toughness Of Fine Ceramics At Elevated Temperature |
JIS Z 3198-1:2003 | Test methods for lead-free solders Part 1: Methods for measuring of melting temperature ranges |
JIS C 60695-2-10:2004 | Fire hazard testing - Glow-wire apparatus and common test procedure |
JIS R 3103-3:2001 | Viscosity And Viscometric Fixed Temperature Of Glass - Part 3: Determination Of Dilatometric Transformation Temperature |
JIS C 8108:1991 | Ballasts for fluorescent lamps |
JIS C 5441:1994 | Testing methods of switches for use in electronic equipment |
JIS R 2207-2:2007 | Test methods for thermal expansion rate of refractory products Part 2: Contact method using cylinder test piece |
JIS K 2242:2006 | Heat treating oils |
JIS H 7105:2002 | Method Of Fixed Strain Test For Coil Springs Of Shape Memory Alloys |
JIS M 7611:1996 | Self Rescuer For Carbon Monoxide |
JIS B 8225:1993 | Safety Valves - Measuring Methods For Coefficient Of Discharge |
JIS R 1642-1:2002 | The Test Method For Internal Friction Test Of Fine Ceramics At Elevated Temperatures - Part 1: Free Decay Method By The Torsion Pendulum |
JIS Z 7302-4:1999 | Densified Refuse Derived Fuel - Part 4: Test Method For Ash |
JIS H 7505:2004 | Method for evaluation of tensile properties of metallic superplastic materials using R-type specimen |
JIS A 9402:2007 | Recycled plastics buffers for parking |
JIS R 2251-1:2007 | Test Methods For Thermal Conductivity Of Refractory Materials - Part 1: Hot-wire Method (cross-array) |
JIS R 1676:2007 | Testing Method For Thermal Shock Resistance Of Porous Fine Ceramics |
JIS M 7651:1996 | Closed-circuit Oxygen Self Rescuers |
JIS K 2408:1996 | Corrosion Inhibitors For Engine Coolant |
JIS TR C0022:2001 | Method Of Calculation Of Energy Efficient Level For Fluorescent Lamp Luminaries Considering Quality Of Lighting |
JIS A 1311:1994 | Method Of Fire Protecting Test Of Fire Door For Buildings |
JIS A 1321:1994 | Testing method for incombustibility of internal finish material and procedure of buildings |
JIS Z 2287:2003 | Method for steam oxidation test of boiler tube metallic materials |
JIS C 2105:2006 | Resin Based Reactive Compounds Used For Electrical Insulation - Methods Of Test |
JIS M 8810:1994 | General Rules For Sampling, Analysis And Testing Of Coal And Coke |
JIS C 8932:1995 | Secondary Reference Amorphous Solar Submodules |
JIS H 7801:2005 | Method For Measuring Thermal Diffusivity Of Metals By The Laser Flash Method |
JIS Z 2282:1996 | Method of cyclic oxidation testing at elevated temperatures for metallic materials |
JIS C 8921:2008 | Photovoltaic Devices - Part 2: Requirements For Reference Solar Devices |
JIS H 7504:2003 | Method for evaluation of blow formability by bulging test on metallic superplastic materials |
JIS C 60068-3-7:2008 | Environmental Testing - Part 3-7: Supporting Documentation And Guidance - Measurements In Temperature Chambers For Tests A And B (with Load) |
JIS R 1648:2002 | Testing Method For Thermal Shock Resistance Of Fine Ceramics |
JIS C 2527:1994 | Testing method for thermo-electromotive force of metallic resistance materials |
JIS C 2805:2003 | Crimp-type terminal lugs for copper conductors |
JIS R 1687:2009 | Testing Method For Tensile Behavior Of Continuous Fiber Reinforced Ceramic Matrix Composites At Elevated Temperatures |
JIS C 2806:2003 | Non-insulated crimp-type sleeves for copper conductors |
JIS K 7217:1983 | Analytical method for determining gases evolved from burning plastics |
JIS R 7212:1995 | Testing Methods For Carbon Blocks |
JIS R 2656:1995 | Testing Method For Modulus Of Rupture Of Refractory Bricks And Insulating Fire Bricks At Elevated Temperature |
JIS C 2807:2003 | Insulated closed-end connectors |
JIS B 8413:1994 | Temperature Limiters And Thermostats For Hot Water Boilers |
JIS C 1216:1995 | Alternating-current watt-hour meters (for connection through instrument transformer) |
JIS C 1263:1995 | Var-hour meters |
JIS K 2270-2:2009 | Crude petroleum and petroleum products -- Determination of carbon residue -- Part 2: Micro method Part 2: Micro method |
JIS R 2616:2001 | Testing Method For Thermal Conductivity Of Insulating Fire Bricks By Water Circulation |
JIS K 2541:1996 | Crude oil and petroleum products - Determination of sulfur content |
JIS R 2252-2:2007 | Test Method For Abrasion Resistance Of Refractory Products - Part 2: Method At Elevated Temperature |
JIS H 7601-2:2002 | Method Of Tensile Test For Intermetallic Compounds - Part 2: Elevated Temperature Tensile Test |
JIS R 1642-2:2002 | The Testing Method For Internal Friction Of Fine Ceramics At Elevated Temperatures - Part 2: Flexural Resonance Method |
JIS B 8481:1999 | Room Thermostats |
JIS S 1037:2006 | Fire-resistive Containers |
JIS C 1610:1995 | Extension and compensating cables for thermocouples |
JIS R 1632:1998 | Test methods for static bending fatigue of fine ceramics |
JIS Z 8704:1993 | Temperature measurement - Electrical methods |
JIS D 0210:1995 | General rules of brake test method of automobiles and motor cycles |
JIS Z 2281:1993 | Test method for continuous oxidation test at elevated temperatures for metallic materials |
JIS K 2254:1998 | Testing Method For Distillation Of Petroleum Products |
JIS A 1325:1995 | Measuring Method Of Linear Thermal Expansion For Building Materials |
JIS R 3103-1:2001 | Viscosity And Viscometric Fixed Points Of Glass - Part 1: Determination Of Softening Point |
JIS C 8910:2001 | Primary reference solar cells |
JIS A 1301:1994 | Method of fire test for wooden structural parts of buildings |
JIS T 8156:1988 | Oxygen-generating closed-circuit breathing apparatus |
JIS T 8023:2006 | Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven |
JIS K 7071:1988 | Testing methods for prepreg, carbon fiber and epoxy resins |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.