MIL L 2104 : F

Superseded

View Superseded by

LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT TACTICAL SERVICE

Available format(s)

PDF

Superseded date

02-10-1997

Language(s)

English

Publisher

US Military Specs/Standards/Handbooks

Specifies engine oils for lubrication of reciprocating internal combustion engines of spark and compression ignition types and power transmission fluid applications in machinery used in tactical combat service

Committee	FSC 9150
DocumentType	Standard
Pages	24
PublisherName	US Military Specs/Standards/Handbooks
Status	Superseded
SupersededBy	MIL-PRF-2104 Revision K:2016

MIL-L-46152 Revision E:1990	LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ADMINISTRATIVE SERVICE, METRIC
MIL-DTL-53135 Base Document:1996	AUXILIARY POWER UNIT, 10 KW, 120/240 VAC, 60 HZ
MIL-C-70723 Base Document:1993	CARTRIDGE, CALIBER .50, M-858 BALL AND M-860 TRACER SHORT RANGE TRAINING AMMUNITION
MIL C 53039 : A	COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT
MIL-C-52326 Revision B:1974	CRANE, CRAWLER MOUNTED, 60 TON AT 25 FOOT RADIUS, DIESEL ENGINE DRIVEN
MIL C 00555 : K	COMPRESSORS, AIR, RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN
MIL-A-516 Revision J:1981	AUGER, EARTH, SKIDMOUNTED; AND AUGER, EARTH, TURNTABLE BASE MOUNTED, POWER DRIVEN
MIL-HDBK-267 Revision A:1987	GUIDE FOR SELECTION OF LUBRICANTS & HYDRAULIC FLUIDS FOR USE IN SHIPBOARDS EQUIPMENT
MIL H 24135/12 : 0	HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, HIGH PERFORMANCE, FOR FLEXIBLE HOSE ASSEMBLIES (SINGLE WIRE BRAID OVER SINGLE SYNTHETIC FIBER BRAID MEDIUM PRESSURE, HIGH TEMPERATURE, MULTI-FLUID SIZES -4 THROUGH -40
MIL L 21260 : D	LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN
MIL-B-734 Revision E:1984	BREAKER, PAVING, GASOLINE POWERED, SELF CONTAINED
MIL H 24135/9 : A	HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES (FOUR PLIES, HEAVY SPIRAL WRAPPED WIRE, HIGH PRESSURE, SIZES 8THRU32)
MIL-C-46168 Revision D:1987	COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT
MIL-C-555 Revision L:1991	COMPRESSOR, AIR RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN
MIL H 52471 : D	HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR
MIL-L-46159 Revision A:1976	LACQUER, ACRYLIC, LOW REFLECTIVE, OLIVE DRAB
MIL G 53133 : B	GENERATOR SETS, SKID MOUNTED, TACTICAL, QUIET, DIESEL ENGINE DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR
MIL R 62220 : B	RECOVERY VEHICLE, FULL TRACKED, MEDIUM, M88A1, PREPARATION FOR STORAGE AND SHIPMENT OF
MIL-E-17341 Revision C:1970	ENGINE, GAS TURBINE, PROPULSION & AUXILIARY NAVAL SHIPBOARD
MIL-R-46082 Revision B:1983	RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC
MIL DTL 0053133 : B NOTICE 1	GENERATOR SETS, SKID MOUNTED, TACTICAL, QUIET, DIESEL ENGINE DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR
MIL-G-19826 Revision F:1984	GENERATOR SET, DIESEL ENGINE, ALTERNATING CURRENT FOR FACILITIES CONSTRUCTION, 1O KW THRU 500 KW (NOT STOCKED)
CC-G-2745 Base Document:1984	GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED)
MIL-C-70726 Revision A:1993	CARTRIDGE, CALIBER .50, BLANK, XM928, PERFORMANCE SPECIFICATION FOR
MIL-B-52734 Revision C:1991	BRIDGE FLOATING RIBBON INTERIOR BAY AND RAMP BAY
MIL-T-52942 Revision C:1996	TRUCK, FIRE FIGHTING: PUMPER, 1000 GPM; LADDER/WATER TOWER COMBINATION
MIL-E-52929 Base Document:1977	ENAMEL, ALKYD, CAMOUFLAGE, FLASH DRY
MIL-C-52648 Revision D:1993	CRANE, CRAWLER MOUNTED, 40 TON AT 12 FOOT RADIUS, 2 CUBIC YARD, DIESEL-ENGINE DRIVEN
MIL-P-10360 Revision G:1993	PUMP, CENTRIFUGAL 4 INCH AND 6 INCH, GASOLINE ENGINE AND DIESEL ENGINE DRIVEN FOR WATER
MIL-DTL-62220 Revision C:1996	RECOVERY VEHICLE, FULL-TRACKED, HEAVY, M88A2, PREPARATION FOR STORAGE AND SHIPMENT OF
MIL-G-52732 Revision B:1985	GENERATORS SETS, GASOLINE ENGINE DRIVEN 0.5KW THRU 10KW 60 HERTZ 400 HERTZ & 28V DIRECT CURRENT TYPE 1 (TACTICAL) CLASS 2 (UTILITY) GENERAL SPECIFICATION FOR
MIL-P-52746 Revision C:1994	PUMP ASSEMBLY, FLAMMABLE LIQUID, CENTRIFUGAL, SELF PRIMING 2 INCH 100 GPM AT 100 FEET TOTAL DYNAMIC HEAD
MIL-T-62514 Base Document:1985	TRUCK, 5 TON, 6X6, M939A1 SERIES
MIL G 62186 : 1988	GENERATOR, ALTERNATING CURRENT (650 AMPERE RECTIFIED), 28 VOLTS DIRECT CURRENT (OIL COOLED)
MIL H 24135/3 : A	HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES (FOUR PLIES, SPIRAL-WRAPPED, BRAIDED HIGH PRESSURE, SIZES 16THRU32
MIL-I-62521 Base Document:1987	INSTALLATION , FLOOR-MAT, THERMAL-BARRIER
MIL PRF 62186 : A	GENERATOR, ALTERNATING CURRENT (650 AMPERE RECTIFIED), 28 VOLTS DIRECT CURRENT (OIL COOLED)
MIL H 24595 : NOTICE 2	HOSE, WIRE REINFORCED LARGE DIAMETER WITH REUSABLE END FITTINGS FOR FLEXIBLE CONNECTIONS
MIL-G-22077 Revision C:1993	GENERATOR SETS, GAS TURBINE, DIRECT AND ALTERNATING CURRENT NAVAL SHIPBOARD USE
MIL E 46117 : A
MIL-C-70724 Base Document:1992	CARTRIDGE, 5.56MM, BLANK, M200A1 PERFORMANCE SPECIFICATION FOR
MIL-S-52377 Revision D:1990	SHOP EQUIPMENT, ELECTRONIC REPAIR, SEMI TRAILER MOUNTED
MIL-L-8937 Revision D:1982	LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, [NATO CODE NUMBER S 1738]
MIL-C-29475 Base Document:1994	COATING, WATER BORNE POLYURETHANE CAMOUFLAGE
SAE AS 8090 : 2016	MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT, GENERAL REQUIREMENTS FOR
MIL-T-9720 Revision F:1984	Truck, Lift, Aerial Stores, 3000 Pounds Capacity MJ-1A and MJ-1B
MIL-C-70725 Revision A:1993	CARTRIDGE, 5.56MM, M862 SHORT RANGE TRAINING AMMUNITION PERFORMANCE SPECIFICATION FOR
MIL-S-45005 Revision C:0198	SEAL, PLAIN, AND SEAL, PLAIN, ENCASED, FLUID, RADIAL, SINGLE AND MULTIPLE LIP SEAL
MIL H 24135/10 : A	HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES SINGLE OR DOUBLE WIRE BRAID,MEDIUM PRESSURE SIZES -4 THROUGH -48
MIL-H-24135-11 Base Document:1993	HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, FOR FLEXIBLE HOSE ASSEMBLIES (FOUR PLY, SPIRAL WIRE WRAP, LOW PRESSURE, SIZES -80 & -96)
MIL-B-26793 Revision B:1958	BLOWER, GASOLINE ENGINE DRIVEN, TYPE A-1
MIL-P-13822 Base Document:1954	Polyisobutylene/Oil Gel
MIL E 62177 : C	ENGINE, DIESEL: 12 CYLINDER, 90 V-TYPE, 750H.P. AVDS1790-2 AVDS1790-2A, AVDS1790-2C, AVDS1790-2D, AVDS1790-2DR, AVDS1790-2CA AND AVDS1790-2DA
MIL-G-52880 Revision A:1983	GENERATOR SET, DIESEL ENGINE, 500 KW 50/60 HERTZ, TACTICAL UTILITY
MIL-E-52835 Revision A:1977	ENAMEL, MODIFIED ALKYD, CAMOUFLAGE, LUSTERLESS
MIL L 52909 : NOTICE 1	LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS
MIL-R-13742 Base Document:1954	RDX, Desensitized
MIL-G-52884 Revision A:1981	GENERATOR SETS, DIESEL ENGINE DRIVEN, 15 THRU 200 KILOWATTS 50/60 & 400 HERTZ, (TACTICAL)
MIL C 71167 : 0	CARTRIDGE, 7.62mm, M973 BALL SHORT RANGE TRAINING AMMUNITION, PERFORMANCE SPECIFICATION FOR
MIL-T-52932 Revision D:1991	TRUCK, LIFT, FORK, INTERNAL COMBUSTION ENGINE, 4000-6000 POUND CAPACITY, GENERAL SPECIFICATION FOR
MIL M 8090 : F	MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT, GENERAL REQUIREMENTS FOR
MIL F 24787 : 0	FITTINGS, END, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES GENERAL SPECIFICATION FOR
MIL H 24135/13 : 0	HOSE, SYNTHETIC RUBBER, WIRE REINFORCED, HIGH PERFORMANCE FOR FLEXIBLE HOSE ASSEMBLIES (DOUBLE WIRE BRAID, HIGH PRESSURE, HIGH TEMPERATURE, MULTI-BASED OIL, SIZES -4 THROUGH -32)
MIL C 71168 : 0	CARTRIDGE, 7.62mm, M974 TRACER SHORT RANGE TRAINING AMMUNITION PERFORMANCE SPECIFICATION FOR
MIL-L-23398 Revision D:1985	LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749
MIL-STD-1400 Revision C:1990	ENGINE, GASOLINE OR DIESEL, METHODS OF TEST
MIL L 52962 : 0	LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS
MIL H 24135/5 : A	HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES (DOUBLE-WIRE BRAID, PERFORATED COVER, FOR HIGH PRESSURE AIR, SIZES 4THRU32)
MIL-B-62098 Base Document:1968	BULLDOZER, EARTH MOVING: TANK MOUNTING, M8A3
MIL-V-62038 Revision E:1988	VEHICLE, WHEELED, PREPARATION FOR SHIPMENT AND STORAGE OF
MIL H 24136 : B	HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES, GENERAL SPECIFICATION FOR
MIL H 24135/1 : A	HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLY (DOUBLE-WIRE BRAID OR TWO-SPIRAL AND ONE-WIRE BRAID HIGH - PRESSURE SIZES 4THRU32
MIL PRF 62270 : A	CHASSIS, TANK: ARMORED VEHICLE, BRIDGE LAUNCHER, M48A5
MIL H 24135/2 : A	HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES (FOUR PLIES, SPIRAL-WRAPPED OR TWO PLIES, SPIRAL-WRAPPED AND ONE PLY, B.H.P - SIZES 6THR16
MIL-G-83380 Base Document:1979	GENERATOR SET, GAS TURBINE ENGINE DRIVEN, 30 AND 60 KW, 400 HZ
MIL-A-62463 Revision B:1992	ACTUATOR ASSEMBLY, ROTARY
MIL-C-52974 Base Document:1983	CRANE, WHEEL MOUNTED, HYDRAULIC, LIGHT 7-1/2 TON
MIL C 87937 : B	CLEANING COMPOUND, AEROSPACE EQUIPMENT
MIL C 62122 : B	CABLE ASSEMBLY, SLAVE, ELECTRICAL, CONNECTORS, PLUG, AND RECEPTACLE
MIL-STD-457 Revision B:1989	FREQUENCY FOR INSPECTION AND CLEANING OF PETROLEUM FUEL OPERATING AND STORAGE TANKS
MIL-T-52735 Revision B:1991	TRANSPORTER M812 CHASSIS, FOR RIBBON FLOATING BRIDGE
MIL H 24135 : B	HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES
NASA KSC SO S 9 : 1993	RETEST AND REFURBISHMENT OF COMPRESSED GAS TRAILERS AND MOVABLE STORAGE UNITS, STANDARD FOR
MIL-G-82058 Revision D:1984	GENERATOR SET, DIESEL, 750 KW, 50/60 HERTZ, PRIME, UTILITY
MIL-S-12511 Revision G:1983	SPRAYER, INSECTICIDE, FRAME MOUNTED, GASOLINE ENGINE DRIVEN, MIST AND SOLID STREAM, 180 GPH
MIL-B-45390 Revision A:1987	BULLDOZER KIT, EARTH-MOVING: TANK MOUNTING, M9
MIL-L-46811 Revision B:1990	LUBRICATION OF GROUND HANDLING, LAUNCHING, & CONTROL EQUIPMENT FOR GUIDED MISSILES
MIL H 13444 : E	HOSE & HOSE ASSEMBLIES, RUBBER: FUEL AND OIL
MIL-G-52889 Revision C:1981	GENERATOR SET, DIESEL ENGINE DRIVEN 5 KW, 60 HERTZ & 10 KW, 60 & 400 HERTZ TACTICAL, UTILITY, GENERAL SPECIFICATION FOR
MIL-A-52940 Revision C:1987	AEROSOL GENERATOR, NON-THERMAL, INSECTICIDE, ULTRA LOW VOLUME
MIL-P-16406 Revision A:1974	PAINT, BLACK, HIGH GLOSS, QUICK DRYING
MIL-DTL-81944 Revision C:1997	TRAILER, MUNITIONS, SMALL (MHU-126 A/M)
MIL-A-13488 Revision C:1973	AIR CLEANER, ENGINE: HEAVY-DUTY, OIL-BATH TYPE (FOR INTERNAL-COMBUSTION ENGINES)
MIL-S-52330 Revision E:1993	SHOP EQUIPMENT, ELECTRICAL REPAIR, SEMITRAILER MOUNTED
MIL H 24135/4 : A	HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES (DOUBLE-WIRE BRAID FOR MEDIUM PRESSURE SIZES 40-48 AND 64)

FED-STD-313 Revision D:1996	MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES
ASTM D 892 : 2013-07	TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS
SAE J 183 : 2016	ENGINE OIL PERFORMANCE AND ENGINE SERVICE CLASSIFICATION (OTHER THAN 'ENERGY CONSERVING')
ASTM D 4951 : 2014 : REDLINE	Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM D 808 : 2016 : REDLINE	Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)
ASTM D 129 : 2013-08	TEST METHOD FOR SULFUR IN PETROLEUM PRODUCTS (GENERAL HIGH PRESSURE DECOMPOSITION DEVICE METHOD)
MIL-STD-290 Revision H:2013	PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS
ASTM D 2896 : 2015 : REDLINE	Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D 524 : 2015 : REDLINE	Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
SAE J 300 : 2015	Engine Oil Viscosity Classification<br>
ASTM D 4628 : 2016 : REDLINE	Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
ASTM D 4047 : 2013-08	TEST METHOD FOR PHOSPHORUS IN LUBRICATING OILS AND ADDITIVES BY QUINOLINE PHOSPHOMOLYBDATE METHOD
ASTM D 4624 : 1993 : R1998	Standard Test Method for Measuring Apparent Viscosity by Capillary Viscometer at High Temperature and High-Shear Rates (Withdrawn 2004)
ASTM D 4998 : 2013 : REDLINE	Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
ASTM D 4683 : 2017 : REDLINE	Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C
FED-STD-791 Revision D:2007	TESTING METHOD OF LUBRICANTS, LIQUID FUELS, AND RELATED PRODUCTS
ASTM D 2622 : 2016 : REDLINE	Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
MIL-STD-105 Revision E:1989	SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
MIL L 21260 : D	LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN