MIL-PRF-85285 Revision E:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT
Available format(s)
PDF
Superseded date
07-28-2022
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for polyurethane coating with a maximum volatile organic compound (VOC) and maximum volatile organic hazardous air pollutants (VOHAPs). The coating is furnished in kit form.
| Committee |
FSC 8010
|
| DevelopmentNote |
Supersedes MIL C 85285 (08/2002) E NOTICE 1 - Notice of Validation. (10/2016)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-PRF-32239 Revision A:2014 | COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS |
| SAE AMS 3116 A : 2005 | PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
| MIL-PRF-32104 Base Document:2010 | MOBILE HYDRAULIC OIL DISPENSER |
| SAE AS 5127 : 2013 | AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS METHODS FOR PREPARING AEROSPACE SEALANT TEST SPECIMENS |
| SAE AMS 3281 : 2016 | SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER FOR INTEGRAL FUEL TANK AND FUEL CELL CAVITIES LOW DENSITY FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| SAE AIR 5479 : 2017 | ENVIRONMENTALLY COMPLIANT PROCESSES FOR LANDING GEAR |
| MIL-PRF-85322 Revision C:2014 | COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION |
| SAE AMS 3265 : 2015 | SEALING COMPOUND, POLYSULFIDE (T) RUBBER, FUEL RESISTANT, NON-CHROMATED CORROSION INHIBITING, FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| MIL-PRF-81309 Revision G:2014 | CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM |
| MIL-PRF-6799 Revision L:2010 | COATINGS, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION |
| MIL-PRF-32177 Revision A:2012 | CLEANING COMPOUND, NONSKID |
| SAE AMS 3144 : 2012 | PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
| SAE AMS 3278 : 2016 | SEALING AND COATING COMPOUND, POLYURETHANE (PUR), FUEL RESISTANT, HIGH TENSILE STRENGTH/ELONGATION, FOR INTEGRAL FUEL TANKS/FUEL CAVITIES/GENERAL PURPOSE |
| SAE AMS 3379 : 2013(R2018) | SEALING COMPOUND, POLYSULFIDE RUBBER PREFORMED STRIPS FOR SEALING REMOVABLE DOORS, SKINS, AND PANELS |
| ASTM F 502 : 2008 | Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces |
| MIL-PRF-32020 Revision B:2011 | PROVER, LIQUID VOLUMETRIC POSITIVE DISPLACEMENT METER |
| MIL-PRF-85570 Revision E:2012 | CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR |
| SAE AMS 3276 : 2016 | SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| SAE AMS 3102 : 2017 | SEALING COMPOUND, POLYTHIOETHER RUBBER FAST CURING, LIGHT WEIGHT (SPECIFIC GRAVITY 0.78, MAX.) FOR INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| ASTM F 502 : 2008 : R2013 | Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces |
| SAE AMS 3603 : 2002 | PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| MIL-PRF-81975 Revision C:2008 | COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
| FAA AC 150/5345-45 : 2007 | LOW-IMPACT RESISTANT (LIR) STRUCTURES |
| MIL-PRF-32479 Revision A:2017 | TRAILERS, LIFT - AIRCRAFT AND MISSILE ENGINE |
| MIL-DTL-87174 Revision A:1998 | HELMET, FLYERS HGU55/P |
| MIL-PRF-32090 Revision A:2016 | DELIVERY SYSTEM, AERIAL, BULK FUEL |
| MIL-DTL-18264 Revision E:2015 | FINISHES, ORGANIC, WEAPONS SYSTEMS, APPLICATION AND CONTROL OF |
| MIL-PRF-85704 Revision C:1998 | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| MIL-DTL-27516 Revision G:2011 | Hose and Hose Assembly, Nonmetallic, Suction and Discharge |
| MIL-STD-3035 Base Document:2013 | DESIGN CRITERIA STANDARD - USAF AIRCRAFT ARRESTING SYSTEMS |
| MIL-PRF-32390 Base Document:2011 | ENGAGING DEVICE, AIRCRAFT ARRESTING SYSTEM - USAF PENDANT CABLE RETRACTION SYSTEMS (PCRS) |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| MIL-DTL-6615 Revision G:2008 | Hose Assemblies, Rubber, Fuel and Nonpotable Water, with Reattachable Couplings, Low Temperature, General Specification for |
| MIL-PRF-83323 Revision D:2016 | TESTER, UNIVERSAL RECEPTACLE, AERIAL REFUELING |
| MIL-DTL-32392 Revision A:2013 | AIRCRAFT ARRESTING SYSTEM - TEXTILE (TAAS) |
| MIL-STD-2161 Revision C:2014 | Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft |
| SAE AS 5127/1 : 2014 | AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS |
| SAE AMS 3167 : 2005 | SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS |
| MIL-DTL-85097 Revision E:2000 | USN/USMC PROPELLANT ACTUATED DEVICES (PADS) - GENERAL SPECIFICATION FOR |
| MIL-DTL-81706 Revision B:2004 | Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys |
| SAE AMS 3095 : 2004 | PAINT: HIGH GLOSS FOR AIRLINE EXTERIOR SYSTEM |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| MIL-PRF-32587 Base Document:2018 | Remover, Paint, Hap-Free, Neutral |
| MIL-PRF-32470 Base Document:2013 | TRUCK, FORKLIFT, 10,000 LB CAPACITY, VARIABLE REACH, ROUGH TERRAIN |
| MIL-PRF-87937 Revision D:2001 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL-DTL-85054 Revision D:2010 | CORROSION PREVENTIVE COMPOUND, WATER-DISPLACING, TRANSPARENT (FORMERLY AMLGUARD) |
| SAE AIR 4012 : 2012 | USAF AIRCRAFT WHEELS |
| SAE AMS 3277 : 2015 | SEALING COMPOUND, POLYTHIOETHER RUBBER, FAST CURING FOR INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| SAE ARP 4118 : 2013 | ISOLATION AND CORROSION PROTECTION OF DISSIMILAR MATERIALS, CARBON COMPOSITE STRUCTURE REPAIR |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| SAE AMS 3092 : 2015 | RELEASE AGENT, FOR USE DURING FORM-IN-PLACE GASKET PREPARATION |
| MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
| ASTM D 823 : 1995 | Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels |
| ASTM D 5895 : 2013 : REDLINE | Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| SAE AMS QQ A 250/4 : 2015 | ALUMINUM ALLOY 2024, PLATE AND SHEET |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| ASTM D 1200 : 2010 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| TT-R-2918 Revision A:2001 | REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS) |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2247 : 2015 : REDLINE | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| MIL-R-81294 Revision D:1990 | REMOVER, PAINT, EPOXY, POLYSULPHIDE AND POLYURETHANE SYSTEMS |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL T 81772 : B | THINNER, AIRCRAFT COATING |
| ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| MIL-PRF-85570 Revision E:2012 | CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
US$20.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.