MIL-STD-1168 Revision C:2014
Current
Current
The latest, up-to-date edition.
Ammunition Lot Numbering and Ammunition Data Card
Available format(s)
PDF
Language(s)
English
Published date
03-11-2014
Publisher
FOREWORD
1. SCOPE
2. REFERENCED DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
Determines and defines the lot numbering system and ammunition data card requirements that are used to identify and document items of ammunition (including guided missiles) and energetic materiel during all phases of their life cycles.
This standard establishes and describes the lot numbering system and ammunition data card requirements that are used to identify and document items of ammunition (including guided missiles) and energetic materiel during all phases of their life cycles.
| DevelopmentNote |
Supersedes MIL L 9835. (08/2007)
|
| DocumentType |
Standard
|
| Pages |
65
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MIL-F-50851 Base Document:1971 | FUZE,GRENADE M219E1 (SIMULATED DEFECTIVE) (INERT) LOADING ASSEMBLING AND PACKING |
| MIL S 60999 : 0 | SWITCH, OPENER, COCKPIT SETTER (TFD). |
| MIL-M-45424 Revision D:1970 | MINE, ANTI-PERSONNEL, M18A1 PARTS FOR |
| MIL-P-50854 Base Document:1971 | PLASTIC BONDED HMX (95/5) POWDER (FOR USE IN AMMUNITION) |
| MIL P 1394 : F | PRIMER, ELECTRIC M52A3B1 |
| MIL-M-48146 Base Document:1973 | MOLYBDENUM TRIOXIDE (FOR USE IN AMMUNITION) |
| MIL-C-82890 Base Document:1993 | CARTRIDGE, FIRE EXTINGUISHER CCU-120/A |
| MIL-I-60281 Revision A:1992 | INITIATOR, CARTRIDGE ACTUATED, M28, ASSEMBLY |
| MIL-E-29236 Base Document:1985 | EXPLOSIVES, BLASTING AGENT, SLURRY, WITH BOOSTERS MILITARY CONSTRUCTION |
| MIL-G-20473 Revision B:1967 | GRENADE, RIFLE, SMOKE, COLORED, M22A2 LOADING, ASSEMBLING, MARKING, AND PACKING |
| MIL-F-60998 Revision A:1970 | FUZE, PD, M557, LOADING ASSEMBLING AND PACKING |
| MIL-D-82885 Base Document:1993 | |
| MIL-DTL-14970 Revision D:2003 | EXPLOSIVE COMPOSITION A-5 |
| MIL C 13139 : E | CHARGE, DEMOLITION, SHAPED, 15 POUND M2A3 AND M2A4 PARTS FOR |
| MIL-I-46576 Revision A:1994 | INITIATOR, CARTRIDGE ACTUATED, M5A2 ASSEMBLY |
| MIL-C-70723 Base Document:1993 | CARTRIDGE, CALIBER .50, M-858 BALL AND M-860 TRACER SHORT RANGE TRAINING AMMUNITION |
| MIL-P-71158 Base Document:1994 | PROPELLANT, LIQUID, XM46 |
| MIL-W-50422 Revision A:1974 | WARHEAD, HE, M18A1 LOADING AND ASSEMBLY |
| MIL-P-50900 Base Document:1971 | PELLET, PLASTIC BONDED HMX (95/5) FOR USE IN AMMUNITION |
| MIL-C-70628 Base Document:1987 | Container, Ammunition, PA108 Assembly |
| MIL-M-50810 Base Document:1971 | MINE, AT, PRACTICE XM69 PARTS FOR |
| MIL-C-50288 Base Document:1970 | CABLE ASSEMBLIES FOR WAR RESERVE ATOMIC DEMOLITION CHARGES, GENERAL SPECIFICATION FOR |
| MIL-P-60295 Revision C:1983 | PROJECTILE, 20MM, HEI, M56A4, METAL PARTS |
| MIL-C-70845 Revision A:1994 | CARTRIDGE, 9MM, PRACTICE, TRACER, M939 |
| MIL-D-13670 Revision C:1975 | DETONATOR, STAB, M63 PARTS FOR LOADING, ASSEMBLING AND PACKING |
| MIL-C-48152 Base Document:1974 | CAP, SPIKE, FOR CARTRIDGE, 105 MM, HEAT-T, M456A1E1 |
| MIL-P-46581 Revision D:1983 | PROJECTILE, 20MM, HIGH EXPLOSIVE, INCENDIARY, M56A3, METAL PARTS |
| MIL B 45417 : C | BANDOLEER, APERS, MINE, M7, ASSEMBLY |
| MIL-P-60017 Revision A:1975 | PRIMER, PERCUSSION, M60A1 PARTS FOR |
| MIL-DTL-82876 Revision A:1995 | CATAPULT, AIRCRAFT EJECTION SEAT, CKU-5B/A ASSEMBLY |
| MIL-W-48105 Base Document:1972 | WASHER |
| MIL-P-48241 Base Document:1973 | PLUG, CLOSING 105 MM |
| MIL-F-50407 Revision A:1973 | FUZE, ROCKET, M412A1 ASSEMBLING AND PACKING |
| MIL-PRF-71182 Base Document:2006 | CARTRIDGE, 25 MM: ARMOR PIERCING FIN STABILIZED DISCARDING SABOT WITH TRACE (APFSDS-T), M919 |
| MIL-C-48171 Base Document:1975 | CARTRIDGE, 81MM, HE, M374A3 LOADING, ASSEMBLING AND PACKING |
| MIL-S-70692 Base Document:1988 | SYM-DI-BETA-NAPHTHYLPARAPHENYLENEDIAMINE |
| MIL-P-14829 Base Document:1968 | PROJECTILE, 4.2 INCH TACTICAL CS, XM633 METAL PARTS ASSEMBLY |
| MIL-C-60562 Revision A:1969 | CASE, CARTRIDGE, 30MM, XM193 |
| MIL C 0017124 : D | CORD, DETONATING |
| MIL-B-48778 Revision A:1975 | BASE PLUG, TRAINING, METAL PARTS |
| MIL C 60920 : A | CABLE ASSEMBLY, ELECTRICAL FOR USE ON SUU-14A/A DISPENSER |
| MIL-R-85545 Revision B:1990 | ROCKET, GTR-18A |
| MIL P 003984 : H | PROPELLANTS FOR SMALL ARMS AMMUNITION |
| MIL P 60318 : B | PROPELLANT, M1 FOR USE IN CHARGE, PROPELLING M67 FOR 105 MM, HOWITZER |
| MIL-C-46982 Revision B:1969 | Cartridge, 4.2 Inch, HE, M329A1 with Supplementary Charge, with Fuze PD, M557, Loading, Assembling and Packing |
| MIL-C-48887 Base Document:1976 | CHARGE, PROPELLING, PA500, FOR MINE M16 |
| MIL P 18761 : C | PRIMER, PERCUSSION, MK 22, MOD 2 |
| MIL-C-85254 Base Document:1981 | CHARGE, LINEAR SHAPED |
| MIL-C-82891 Base Document:1993 | CARTRIDGE, IMPULSE, MARK 14 MOD 1 |
| MIL-DTL-60547 Revision G:2008 | PROJECTILE, 105 MM, HE, M1 AND M760 - METAL PARTS ASSEMBLY |
| MIL-A-51372 Base Document:1973 | ADAPTER, BOMB CLUSTER, 750 POUND, M30E2 |
| MIL-M-50559 Base Document:1971 | MODULE ASSEMBLIES, FIRING AND SAFING, TRAINING |
| MIL-C-50443 Base Document:1969 | Cartridge, 105MM, HE, M444E1, Body Assembly and Base Plug for |
| MIL-DTL-43036 Revision C:2017 | TAPE, PRESSURE-SENSITIVE ADHESIVE, PLASTIC FILM, (FOR SEALING FIBER CONTAINER AND CANS) |
| MIL-F-50274 Base Document:1969 | FUZES, GRENADE, H.E.M218, M219 & XM224 LEAD CUP ASSEMBLY FOR LOADING, ASSEMBLING AND PACKING |
| MIL-P-20334 Revision A:1967 | PYROTECHNICS WHITE AND COLOR COMPOSITIONS |
| MIL-P-48349 Base Document:1974 | PROPELLANT M30A1 FOR USE IN 155M PROPELLING CHARGES |
| MIL I 85547 : B | IGNITER, ROCKET MOTOR, PVU-3/E |
| MIL-C-27505 Revision B:1967 | Cartridge, Engine Starter MXU-4A/A |
| MIL-DTL-32027 Base Document:1998 | GENERATOR, GAS, DRY BAY FIRE EXTINGUISHER, GGU-15A/A |
| MIL-M-14926 Revision D:1991 | MOTOR, ROCKET, LAUNCH, M114 PARTS FOR |
| MIL-F-45061 Revision E:1973 | FUZE, MINE AT, NM, M606, PARTS FOR |
| MIL-PRF-71140 Revision A:2006 | Cartridge, 25MM: Target Practice with Trace (TP-T), M793 |
| MIL-C-13739 Revision A:1965 | COMPOSITION, DELAY |
| MIL-E-50008 Revision B:1982 | 2-ETHYLHEXANOIC ACID, TECHNICAL |
| MIL-M-85657 Base Document:1984 | MOTOR, ROCKET, 2.75 INCH, MARK 66 MODS |
| MIL-I-60476 Revision A:1979 | IGNITER, MARK 125 MOD 5, LOADING ASSEMBLING AND PACKING |
| MIL-D-46256 Revision B:1973 | DETONATOR STAB M24 - PARTS FOR, & LOADING, ASSEMBLING & PACKING |
| MIL-DTL-32093 Revision A:2005 | INITIATOR, CARTRIDGE ACTUATED JAU-75/A, JAU-76/A, JAU-77/A |
| MIL-DTL-48684 Revision B Interim Revision:2004 | CARTRIDGE, 40 MM: M918TP LOADING, ASSEMBLING, AND PACKAGING |
| MIL-G-51491 Revision A:1986 | GENERATOR, SMOKE, MECHANICAL PULSE JET, M3A4 |
| MIL-F-60965 Base Document:1979 | FUZE ELECTRONIC TIME, M587 (LESS BOOSTER PELLET AND CUP) |
| MIL-P-46601 Revision B:1976 | PRIMER, PERCUSSION. M36A2 |
| MIL-I-14729 Revision A:1969 | INCREMENT, PROPELLANT, M90E1 |
| MIL C 10190 : D | CARTRIDGE, CALIBER .50, BALL, M33 |
| MIL-C-60393 Revision A:1968 | CARTRIDGE, DELAY: 20 SECOND DELAY, XM252 PARTS, LOADING, ASSEMBLING AND PACKING |
| MIL F 20423 : D | FUZE, BASE DETONATING, M91A2 LOADING, ASSEMBLING AND PACKING |
| MIL-C-85122 Base Document:1980 | CARTRIDGE, 20 MM MARK 100 SERIES |
| MIL-DTL-13139 Revision F:2010 | Charge, Demolition, Shaped, 15 Lb.-M2A4 Parts for |
| MIL-DTL-50872 Revision D Interim Revision:2004 | CARTRIDGE, 40 MM: HEDP, M433 |
| MIL-DTL-85769 Revision B:2003 | ROCKET MOTOR, MK 117 MOD 0 |
| MIL-P-60029 Revision B:1973 | PROPELLANT, M9 FOR USE IN INCREMENTS M90 AND M90A1 FOR 81MM MORTAR |
| MIL-P-70762 Base Document:1990 | PROPELLANT, COMPOSITE, CAST FOR USE IN SIMULATOR, MISSILE: SAGGER XM27 |
| MIL P 19264 : B | PROPELLANT, BS-NACO, FOR THE 5"/54 CALIBER PROPELLING CHARGE |
| MIL-A-82950 Base Document:1995 | ACTUATOR, BELLOWS ATU-117/P |
| MIL-C-48135 Base Document:1973 | CARTRIDGE, 105 MM, HE M1, (MOD) LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-48683 Revision B Interim Revision:2004 | CARTRIDGE 40 MM PRACTICE - TP M918 - PROJECTILE ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING |
| MIL-W-50258 Revision A:1971 | WARHEAD SECTION, 762MM ROCKET, PRACTICE: M38 METAL PARTS FOR |
| MIL-W-48381 Base Document:1974 | WARHEAD SECTION, GM, PRACTICE, LIGHTWEIGHT, M252E1 PARTS AND ASSEMBLING |
| MIL-C-85257 Base Document:1981 | CORD ASSEMBLY, DETONATING |
| MIL-H-51059 Revision A:1961 | HOSE, FUEL, FLAME THROWER, M8 |
| DOD-E-83578 Revision A:1987 | EXPLOSIVE ORDNANCE FOR SPACE VEHICLES, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-DTL-45144 Revision F:2017 | Fuse, Blasting, Time - M700, and Dummy Fuse, Blasting, Time - Inert Loading, Assembling and Packing |
| MIL-DTL-32172 Base Document:2005 | INITIATOR, CARTRIDGE ACTUATED JAU-72A/A |
| MIL-DTL-50911 Revision B:2011 | Priming Assembly for Demolition Charge Assembly : M183 Parts for and Loading, Assembling and Packing |
| MIL L 45403 : D | LINK,CARTRIDGE,METALLIC BELT, 7.62MM, M13 |
| MIL P 46662 : C | PRIMER, PERCUSSION, M90, LOADING, ASSEMBLING AND PACKING |
| MIL D 14721 : NOTICE 1 | DISPENSER AND BOMB, AIRCRAFT CBU-46/A LOADING, ASSEMBLING AND PACKING |
| MIL-F-46580 Revision C:1973 | FUSE, POINT DETONATION, M505A3 |
| MIL-P-60088 Revision A:1970 | PROJECTILE, 175 MILLIMETER, WP, XM510E1, FILLING ASSEMBLY |
| MIL-F-50831 Base Document:1979 | FUZE, TRAINING, ELECTRONIC TIME M744 |
| MIL P 70794 : 0 | PROJECTILE, 20 MM, MULTIPURPOSE TRACE SELF-DESTRUCT, M940 METAL PARTS |
| MIL C 50525 : 0 | CHARGE ASSEMBLY, DEMOLITION, M183 WITH CHARGE, DEMOLITION M112, PARTS FOR, LOADING, ASSEMBLY AND PACKING |
| MIL-B-11596 Revision B:1968 | BASE COUPLING, FIRING DEVICE, NON-METALLIC, M2, LOADING, ASSEMBLING AND PACKING |
| MIL-C-48023 Base Document:1973 | CARTRIDGE, 107MM, HE: M453 LOADING, ASSEMBLING AND PACKING |
| MIL P 46402 : C | PRIMER, ELECTRIC, M83, LOADING, ASSEMBLING AND PACKING |
| MIL-D-45495 Revision A:1969 | DETONATOR, ELECTRIC, M84 PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL C 70460 : A | CARTRIDGE, 5.56MM, BALL, (HEAVY BULLET) REFERENCE |
| MIL-C-48081 Base Document:1972 | CHARGE, PROPELLING, 175MM, M199 |
| MIL-P-46476 Revision C:1975 | PRIMER, PERCUSSION, XM81, LOADING, ASSEMBLING AND PACKING |
| MIL C 51427 : B | CANISTER, CHEMICAL PROJECTILE, DF, M20 |
| MIL-G-48165 Base Document:1973 | GRENADE, G.P. M43A1 AND BOMB, BLU-18 CONTAINER ASSEMBLY FOR |
| MIL-C-1317 Revision E:1972 | CARTRIDGE, CALIBER .30 TRACER, M25 |
| MIL-S-51078 Revision C:1984 | SODIUM HEXAMETAPHOSPHATE, TECHNICAL |
| MIL-F-51531 Revision A:1991 | FLUID CONTAINER, FILLED (FOR M13 DECONTAMINATING APPARATUS) |
| MIL-DTL-32369 Base Document:2011 | CARTRIDGE, IMPULSE, CCU-167/B |
| MIL-B-82549 Revision A:1989 | BOMB, GENERAL PURPOSE, MARK 83, 1000 POUND, EXPLOSIVE LOADING ASSEMBLING, AND PACKING |
| MIL C 71139 : 0 | CARTRIDGE, 25mm, HIGH EXPLOSIVE INCENDIARY TRACER, SELF-DESTRUCT, M792 |
| MIL-DTL-63092 Revision B Interim Revision:2004 | Cartridges, 40 Millimeter, Parachutes, Loading, Assembling, and Packing |
| MIL-STD-129-1 Base Document:1993 | MARKING FOR SHIPMENT & STORAGE - AMMUNITION & EXPLOSIVES |
| MIL-L-51414 Revision A:1977 | LAUNCHER & GRENADES, SMOKE, HC, M226, COMPONENTS FOR |
| MIL-F-48717 Base Document:1991 | Fuze, Proximity, Artillery: (Loading, Assembling, and Packing) |
| MIL-DTL-63245 Revision C:2008 | Projectile 155 Millimeter: HE, Metal Parts Assembly, M795 |
| DEFSTAN 13-96(PT1)/4(2009) : 2009 | LOTTING AND BATCHING OF AMMUNITION - PART 1: GENERAL REQUIREMENTS |
| MIL-DTL-46594 Revision C:2011 | Charge, Demolition, Shaped, 40 LB. M3A1 Loading, Assembling and Packing |
| MIL-DTL-32010 Revision A:2006 | FIRE EXTINGUISHER CARTRIDGE, CCU-90/A (MH92) |
| MIL-DTL-32106 Base Document:2003 | INITIATORS, ELECTRICAL, FOR ROCKET MOTOR IGNITERS |
| MIL H 51191 : D NOTICE 1 | HEATER, AIR, ELECTRIC, FILTER UNIT, M3 |
| MIL-B-14984 Revision A:1977 | BODY-OGIVE MATCHED MACHINED ASSEMBLY FOR M454 PROJECTILE |
| MIL-DTL-32115 Revision A:2007 | CARTRIDGE, FIRE EXTINGUISHER, AIRCRAFT, CCU-147/A (WB53) |
| MIL-M-50276 Base Document:1969 | MODULE GENERAL SPECIFICATION FOR |
| MIL-D-23615 Revision C:1993 | DESIGN AND EVALUATION OF CARTRIDGE ACTUATED DEVICES |
| MIL-DTL-50699 Revision B:2005 | Initiator, Propellant Actuated, JAU-2/A25 Assembly |
| MIL-P-45117 Revision E:1972 | PROJECTILE, 20MM, TARGET PRACTICE, M55A2 |
| MIL-K-48213 Base Document:1973 | KNOB, SETTING |
| MIL-F-50280 Base Document:1969 | FILTER, CRYSTAL |
| MIL-C-50903 Base Document:1971 | CONNECTOR, MALE, ASSEMBLY FOR M18A1 APERS MINE |
| MIL-T-46604 Revision B:1993 | THRUSTER, CARTRIDGE ACTUATED, M13, ASSEMBLY |
| MIL-I-60231 Revision B:1995 | IGNITION ELEMENT, ELECTRIC, M55 ASSEMBLY |
| MIL-C-60943 Revision A:1970 | CARTRIDGE, 40MM, HE, M384 LOADING, ASSEMBLING AND PACKING |
| MIL-P-46464 Revision A:1967 | PELLET, TETRYL |
| MIL-P-48296 Base Document:1974 | POLYTETRAFLUOROETHYLENE (PTFE) |
| MIL-C-48286 Revision A:1975 | CARTRIDGE, MINE EJECTION ASSEMBLY. M198 |
| MIL-M-20484 Revision C:1969 | MOTOR, ROCKET, M4 LOADING, ASSEMBLING, MARKING AND PACKING |
| MIL M 51103 : B | MAGNESIUM OXIDE, TECHNICAL |
| MIL-DTL-82762 Revision B:2004 | CUTTER, DELAY, PROPELLANT ACTUATED, MLU-58/B |
| MIL-W-14969 Base Document:1968 | WARHEAD, 2.75 INCH ROCKET XM229, (TWO PIECE) PARTS FOR |
| MIL-A-50299 Base Document:1970 | ADAPTER AND TEST PLUG ASSEMBLY |
| MIL-DTL-48568 Revision D:1996 | CATAPULT, AIRCRAFT EJECTION SEAT, CKU-7/A ASSEMBLY |
| MIL-C-70726 Revision A:1993 | CARTRIDGE, CALIBER .50, BLANK, XM928, PERFORMANCE SPECIFICATION FOR |
| MIL-M-48292 Base Document:1974 | MINE, ANTI TANK, METAL PARTS ASSEMBLY FOR M56 MINE |
| MIL-F-60445 Revision C:1991 | FIN AND NOZZLE ASSEMBLY, FOR ROCKET MOTOR 2.75 INCH MARK 4 AND MARK 40 PARTS FOR |
| MIL-G-50463 Base Document:1969 | GRENADE, HAND, PRACTICE, DELAY, XM69: STOPPER FOR |
| MIL-C-14887 Base Document:1974 | CASE, CARTRIDGE, 106 MM, M9431 ASSEMBLY |
| MIL-P-46530 Revision D:1988 | PROJECTILE, 20MM, TARGET PRACTICE, M99A1 |
| EIA CMB 6-1 : 2014 STABILIZED | CONFIGURATION AND DATA MANAGEMENT REFERENCES |
| MIL L 60427 : B | LOCKWIRE, FOR 2.75 INCH ROCKET MOTOR ALL MARKS AND MODS |
| MIL-C-48424 Base Document:1973 | CASE, CARTRIDGE, 76MM, M88B1 |
| DOD-C-70514 Base Document:1985 | Cartridge, 120MM, Super Slug, Load, Assemble, and Pack |
| MIL-DTL-60277 Revision B:2003 | INITIATOR, CARTRIDGE ACTUATED, DELAY, M26 ASSEMBLY |
| MIL-G-82932 Base Document:1994 | GAS GENERATOR, M17, REMANUFACTURED ASSEMBLY |
| MIL I 60455 : B | IGNITER, MARK 125 MOD PARTS FOR |
| MIL-A-48284 Base Document:1974 | AIRCRAFT CABLE ASSEMBLY |
| MIL-P-46475 Revision C:1975 | PRIMER, PERCUSSION, M81 PARTS FOR |
| MIL-B-48761 Base Document:1978 | BATTERY, SINGLE CELL, PRIMARY RESERVE |
| MIL S 14947 : NOTICE 2 | SIGHT ASSEMBLY, FRONT |
| MIL-F-46579 Revision D:1976 | FUSE, POINT DETONATING, M505A3, PARTS FOR |
| MIL-P-46686 Revision C:1968 | PRIMER, PERCUSSION, M92E1 PARTS FOR |
| MIL-C-14836 Revision A:1972 | CASE, PROJECTILE, BURSTER, M9A1 |
| MIL-C-45889 Base Document:1975 | CABLE ASSEMBLIES, POWER, ELECTRICAL, W2-H,W3-H,W4-H,W6-H,W7-H,W8-HA AND W20-H |
| MIL-P-50601 Revision A:1976 | PROJECTILE, 20MM, TP-T, M212A1; METAL PARTS |
| MIL-DTL-32112 Base Document:2003 | CARTRIDGE, IMPULSE, CCU-146/A |
| MIL-F-48267 Base Document:1973 | FUZE TIMER, MINE (INTEGRATED CIRCUIT) |
| MIL-C-82894 Base Document:1994 | CARTRIDGE, FIRE EXTINGUISHER, CCU-126/A |
| MIL-P-46661 Revision C:1976 | PRIMER, PERCUSSION, XM90E1 PARTS FOR |
| MIL-C-50494 Base Document:1972 | CAP BLASTING, PRACTICE M10 PARTS FOR, ASSEMBLING AND PACKING |
| MIL-J-50516 Base Document:1970 | JETTISON PLATE (WITH ACCESSORIES) FOR DISPENSER, XM19 PARTS FOR AND ASSEMBLY |
| MIL-P-60835 Revision A:1974 | PROJECTILE, 20MM, HE1-T, M242, METAL PARTS |
| MIL-P-46636 Revision D:1995 | PROJECTILE, 20MM, HIGH PRESSURE TEST, M54A1 |
| MIL-P-46547 Revision A:1972 | PROJECTILE, 20MM, DUMMY, M51A2 |
| MIL-E-48223 Revision A:1974 | ELECTROCOULOMETER, DUAL ANODE, TWO MICROAMPERE HOURS AND NINE HUNDRED AND SIXTY MICROAMPERE HOURS CAPACITY |
| MIL-P-70637 Base Document:1988 | PROJECTILE, 20MM, ARMOR PIERCING-TRACER, M95, METAL PARTS |
| MIL-T-46616 Revision C:1992 | THRUSTER, CARTRIDGE ACTUATED, M3A3 ASSEMBLY |
| MIL-P-85766 Base Document:1986 | PROJECTILE, 20 MILLIMETER , TARGET PRACTICE-TRACER, PGU-30/B |
| MIL-W-60307 Revision C:1987 | WARHEAD, 2.75 INCH ROCKET, SMOKE, WP, M156 (METAL PARTS) |
| MIL S 70745 : 0 | STRIP, AMMUNITION, METALLIC, 30MM |
| MIL-P-60454 Base Document:1967 | PRIMER, PERCUSSION, MARK 2A4 METAL PARTS FOR |
| MIL-C-14972 Revision C:1992 | CLIP, SHORTING ASSEMBLY, FOR 2.75 INCH ROCKET MOTOR |
| MIL-E-14719 Revision A:1968 | EXTENSION, FUZE, BOMB, M1A1 (M1E1), PARTS FOR |
| MIL-P-60465 Base Document:1967 | PROPELLANT M6 FOR USE IN CARTRIDGE, 90MM, CANISTER, M377 |
| MIL-W-50987 Base Document:1972 | WARHEAD 2.75 INCH ROCKET HE M151 WITH FUSE OR WITHOUT FUSE LOADING, ASSEMBLING & PACKING |
| MIL-P-70524 Base Document:1990 | PROJECTILE, 105 MM, HE, RA, XM913/XM927 WARHEAD INSULATION ASSEMBLY FOR |
| MIL-STD-973 Base Document:1992 | CONFIGURATION MANAGEMENT |
| MIL-M-60003 Revision E:1992 | MOTOR, ROCKET, ASSEMBLY, M54 OR M123 PARTS FOR |
| MIL E 0014970 : C | EXPLOSIVE COMPOSITION A5 |
| MIL F 51353 : A NOTICE 1 | FUZE, HAND GRENADE, M201A1 |
| MIL-P-46651 Revision B:1966 | Propellant M30E1 for use in Propelling Charge M85 and MM121 for 105MM Howitzer |
| DEFSTAN 13-96(PT1)/3(1994) : 1994 | LOTTING AND BATCHING OF AMMUNITION - PART 1: GENERAL REQUIREMENTS |
| MIL-DTL-60944 Revision B Interim Revision:2004 | CARTRIDGE, 40 MM - PRACTICE, M385A1 |
| MIL P 3984 : J | PROPELLANT FOR SMALL ARMS AMMUNITION |
| MIL-DTL-70759 Revision A:2004 | Container, Ammunition: Hand-Held Pyrotechnic Signal Series, ScopePA142A1 |
| LLL-R-626 Revision D:1984 | ROSINS: GUM, WOOD, AND TALL OIL |
| MIL-B-48177 Base Document:1973 | BARIUM SULFATE |
| MIL-M-60923 Revision A:1970 | MINE, APERS, M26 LOADING, ASSEMBLING AND PACKING |
| MIL-P-60338 Base Document:1966 | PRIMER, PERCUSSION, M47 AND M47B2 METAL PARTS FOR |
| MIL I 51426 : B | INTERIOR CONTAINER ASSEMBLY |
| MIL-C-70690 Base Document:1988 | CARTRIDGE, FUZELESS, 25MM, HIGH EXPLOSIVE INCENDIARY TRACER, (HEI-T), M792 |
| MIL-C-48237 Base Document:1973 | CARTRIDGE, 105 MM, APDS-T, M728 LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-32260 Revision A:2014 | Primer, Percussion - M28A2, M28B2, XM133 and XM134 Assembly |
| MIL-DTL-32113 Revision A:2011 | INITIATOR, CARTRIDGE ACTUATED, JAU-74/A |
| MIL-T-60394 Revision A:1967 | TAPE, PRESSURE SENSITIVE ADHESIVE FILM FOAM, DOUBLE COATED (FOR USE WITH AMMUNITION) |
| MIL-F-51465 Revision A:1987 | FUZE, FLOATING SMOKE POT, M207A1 |
| MIL-C-48141 Base Document:1973 | COMPOSITION, TUNGSTEN, DELAY |
| MIL-F-50454 Revision A:1969 | FUZE, GRENADE, M219E1 LOADING, ASSEMBLING AND PACKING |
| MIL-G-46905 Revision A:1967 | GROMMETS, PLASTIC, FILAMENT WOUND, (FOR SEPARATE LOADED PROJECTILES) |
| MIL T 18755 : B | TRACER MARK 11 MOD 0 |
| MIL-C-38972 Base Document:1970 | CARTRIDGE, BOMB EJECTION CCU-9/B |
| MIL-P-50977 Base Document:1972 | PELLETS (PBX) FOR USE IN AMMUNITION |
| MIL-A-48822 Base Document:1975 | ADAPTOR, CONNECTOR: W5F-1 AND CABLE ASSEMBLY: W6FE1 |
| MIL-A-48123 Base Document:1972 | ADAPTER, SAFETY FOR FUZE, PD, M720 (LESS BOOSTER PELLET AND LEAD CUP CHARGE) |
| MIL-A-45897 Base Document:1977 | ARM-SAFE DEVICE, ATOMIC WEAPON: XM134E1 |
| MIL-L-50205 Base Document:1968 | LINER, CUP-FOR WARHEAD, 2.75 INCH ROCKET, M151 AND XM229 |
| MIL-C-48061 Base Document:1973 | CELLULOSE NITRATE, PLASTIC SHEETS |
| MIL-C-63352 Base Document:1980 | CARTRIDGE, 5.56MM, BALL, XM777 |
| MIL-S-45428 Revision D:1969 | SQUIB, ELECTRIC, M2, PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| DOD-C-63537 Revision A:1984 | CARTRIDGE, CALIBER .22 LONG RIFLE, TRACER, M861 |
| MIL-C-51360 Revision B:1988 | CANISTER, SMOKE, HC, 105 MM, PROJECTILE, M1 |
| MIL-P-60009 Revision B:1990 | PROPELLANT CHARGE ASSEMBLY ROCKET, HIGH EXPLOSIVE, 66MM, M72A1, WITH COUPLER |
| MIL-P-71089 Base Document:1991 | PROJECTILE, PRACTICE, 155 MM, M804E1 LOADING, ASSEMBLING AND PACKING |
| MIL P 50774 : A | PROJECTILE, 20 MM, TARGET PRACTICE, M55A3 AND M55A3BL |
| MIL-DTL-82935 Base Document:1996 | CARTRIDGE, IMPULSE, CCU-132/A |
| MIL-S-85377 Revision A:1983 | SWITCH, STEPPING, DIRECT CURRENT AIRCRAFT DISPENSER |
| MIL-R-46453 Revision D:1975 | RELAY, M7, PARTS FOR LOADING, ASSEMBLING AND PACKING |
| MIL-B-48265 Base Document:1973 | BAND, OBTURATING, FOR 175 MM, PROJECTILE |
| MIL-F-50807 Base Document:1971 | FUZE MINE, AT, XM619 PARTS AND ASSEMBLY |
| MIL-C-48287 Base Document:1973 | CYLINDER FOR M56 MINES |
| MIL-P-46620 Revision C:1977 | PROJECTILE, 20MM, HEI, M97A2, METAL PARTS |
| MIL-F-60323 Revision A:1971 | FUZE, PD, M525, M526 & M527B1 LESS HEAD ASSEMBLY METAL PARTS FOR |
| MIL-PRF-46676 Revision B:2006 | FLEXIBLE EXPLOSIVE |
| MIL W 50927 : NOTICE 2 | WARHEAD SECTION 762MM ROCKET HE M186 LOADING ASSEMBLING & PACKING |
| MIL-C-70724 Base Document:1992 | CARTRIDGE, 5.56MM, BLANK, M200A1 PERFORMANCE SPECIFICATION FOR |
| MIL-P-50257 Base Document:1969 | PROJECTILE 8 INCH, HE, M404 LOADING, ASSEMBLING AND PACKING. |
| MIL-A-48073 Base Document:1972 | ACCESSORIES, LOADING, FOR 152MM, CARTRIDGES M409 SERIES, M411 SERIES, XM617, M625 SERIES, AND XM657 |
| MIL-G-14936 Base Document:1968 | GRENADE, XM68, SAFETY CLIP FOR |
| MIL C 60921 : A | CABLE ASSEMBLY, TEST, ELECTRICAL SWITCH FOR USE ON SUU-14/A DISPENSER |
| MIL-C-48060 Base Document:1973 | CARTRIDGE, 105 MM, HE, M444E1, FUSIBLE PLUG ASSEMBLY FOR |
| MIL W 50275 : A NOTICE 2 | WARHEAD, HE, M18A1 PARTS FOR |
| MIL-C-48038 Base Document:1972 | CALCIUM CHROMATE, TECHNICAL |
| MIL-C-48371 Base Document:1974 | CYLINDER ASSEMBLY (REUSE) FOR M56 MINES |
| MIL-C-50814 Base Document:1970 | CDU - MISCELLANEOUS CANISTER PARTS |
| MIL-A-45872 Base Document:1975 | ARM-SAFE DEVICE ATOMIC WEAPON M38 ASSEMBLY, PACKING AND MARKING |
| MIL-DTL-60201 Revision D:2010 | THRUSTER, CARTRIDGE ACTUATED, M25A1 ASSEMBLY |
| MIL-P-18811 Revision B:1990 | PROPELLANT GRAIN, MK 43, MOD 1 |
| MIL-C-60456 Base Document:1967 | CARTRIDGE, 105MM, HE, ROCKET ASSISTED, XM548 ACCESSORIES FOR |
| O-G-491 Revision D:1992 | GLYCEROL, TECHNICAL (HIGH GRAVITY) |
| MIL-W-60002 Revision A:1966 | WARHEAD, HE, M18, PARTS FOR |
| MIL-C-324 Revision C:1983 | CALCIUM SILICIDE, TECHNICAL |
| MIL-T-48236 Base Document:1973 | TEST SET, ELECTRICAL CIRCUIT, M40E1 PARTS FOR, ASSEMBLING AND PACKING |
| MIL-B-48220 Base Document:1973 | BREECHBLOCK-FUZE ASSEMBLY, ATOMIC WEAPON, TRAINING |
| MIL-D-46582 Revision C:1983 | Detonator, Stab, M57A1 and M57A2(No S/S Document) |
| MIL-DTL-32022 Base Document:1998 | GENERATOR, GAS, FIRE EXTINGUISHER, GGU-16/A, GGU-17/A, GGU-18/A, GGU-19/A, GGU-20/A |
| DEFSTAN 13-98/4(2002) : 2002 | REQUIREMENTS FOR THE PROVISION OF GENERAL MUNITIONS TECHNICAL DATA FOR MINOR PROJECTS |
| MIL I 60283 : A | INITIATOR, CARTRIDGE ACTUATED, M27 ASSEMBLY |
| MIL-R-48233 Revision A:1980 | ROD, STABILIZING, COATED FOR 2.75 INCH ROCKET MOTOR MK4/MK40 AND MODS |
| MIL-Z-11144 Revision A:1984 | ZIRCONYL NITRATE, DIHYDRATE, ANALYZED REAGENT |
| MIL-B-50432 Base Document:1969 | BAG, BARRIER, NEOPRENE, FOR USE WITH 152MM CARTRIDGES |
| MIL-F-60991 Revision B:1972 | FUZE, PD, M533 METAL PARTS FOR & LOADING, ASSEMBLING AND PACKING |
| MIL-S-50482 Revision A:1971 | SIGNAL, ILLUMINATION, GROUND, YELLOW, XM191, GREEN, XM192 AND RED, XM193 PARTS FOR AND LOADING, ASSEMBLING PACKING |
| MIL C 82876 : 1993 | CATAPULT, AIRCRAFT EJECTION SEAT, CKU-5B/A ASSEMBLY |
| MIL-DTL-45010 Revision B:2014 | COMPOSITION C-4 |
| MIL-P-45172 Revision F:1972 | PROJECTILE, 20MM, API, M53, METAL PARTS |
| MIL-C-70784 Base Document:1989 | CARTRIDGE, 25mm ARMOR PIERCING DISCARDING SABOT TRACER (APDS-T), M791, REFERENCE |
| MIL C 85623 : 0 | CARTRIDGE, 25 MM, TARGET PRACTICE PGU-23/U |
| MIL S 83352 : B | SIGNAL KIT, PERSONNEL, DISTRESS, A/P25S-5A |
| MIL-T-48134 Revision A:1973 | TEST SET, BLASTING CAP, M51 PARTS, ASSEMBLING AND PACKING |
| MIL-P-46421 Revision B:1975 | PRIMER, PERCUSSION, M57 METAL PARTS FOR |
| MIL-C-70725 Revision A:1993 | CARTRIDGE, 5.56MM, M862 SHORT RANGE TRAINING AMMUNITION PERFORMANCE SPECIFICATION FOR |
| MIL-C-48565 Base Document:1975 | CASE, CARTRIDGE, 90MM, M108B1 |
| MIL C 51363 : 0 | CANISTER, COLORED SMOKE, 155MM, SHELL, M3 & M4, COMPONENTS FOR |
| MIL I 50699 : A | INITIATOR, PROPELLANT ACTUATED, JAU-2/A25 ASSEMBLY |
| MIL-F-50522 Base Document:1970 | FUZE, PD, M536: SEPARATION CHARGE ASSEMBLY FOR METAL PARTS FOR |
| MIL-B-85735 Base Document:1985 | BALLISTIC MODIFIER LC-12-15 |
| MIL-R-29565 Revision A:1990 | ROCKET MOTOR, MK 125 MOD 1 |
| MIL-C-71010 Base Document:1994 | Covers, Camouflage for Tiles, Armor, for the M2A2/M3A2 Bradley Fighting Vehicle Systems (BFVS) |
| MIL-DTL-32122 Revision C:2011 | CARTRIDGE, AIRCRAFT FIRE EXTINGUISHER JL42, JL43, JL44 |
| MIL-G-48246 Base Document:1973 | GLYCERYL ESTER OF 12 HYDROXY STEARIC ACID |
| MIL-S-48142 Base Document:1973 | SIGNAL, ILLUMINATION, GROUND, XM199 RED, XM201 WHITE, XM200 GREEN AND XM198 AMBER PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL D 60365 : NOTICE 1 | DYNAMITE (COMMERCIAL) |
| MIL-C-85624 Base Document:1983 | CARTRIDGE, 25 MILLIMETER, PGU-20/U (API) |
| MIL-P-85121 Base Document:1980 | PROJECTILES, 20MM MARK 100 SERIES |
| MIL-G-14934 Base Document:1968 | GRENADE, HAND, FRAG, IMPACT, XM68 LOADING, ASSEMBLING AND PACKING |
| MIL-S-48377 Base Document:1974 | SIGNAL, SMOKE, GROUND XM202 THRU XM205 RED, YELLOW, GREEN AND WHITE PARTS FOR AND LOADING ASSEMBLING AND PACKING |
| MIL-T-339 Revision C:1973 | TETRYL [TRINITROPHENYLNITRAMINE] |
| MIL-DTL-82967 Revision B:2011 | SQUIB, ELECTRIC SQ85 |
| MIL-DTL-60584 Revision B:2006 | Projectile,155 Millimeter - Smoke, WP, Metal Parts Assembly, M110A2 |
| MIL-F-70676 Base Document:1988 | Ferric Acetylacetonate |
| MIL O 51499 : A NOTICE 1 | |
| MIL-A-48826 Base Document:1975 | ACTUATOR, EXPLOSIVE LOADING, ASSEMBLING AND PACKING |
| MIL-P-60428 Base Document:1967 | PARACHUTE PROTECTOR AND OGIVE ASSEMBLY, WHITE STAR |
| MIL C 46409 : D | CARTRIDGE, CALIBER .38, SPECIAL, BALL, M41 |
| MIL I 50374 : A | INITIATOR, PROPELLANT ACTUATED, M104 ASSEMBLY |
| MIL-B-48817 Base Document:1975 | BAROSWITCH ASSEMBLY, M5 |
| MIL-B-48777 Revision A:1975 | BLOCK, BREECH, TRAINING, FOR PROJECTILE TRAINING, 8 INCH |
| MIL-C-401 Revision E:1974 | COMPOSITION B |
| MIL-F-14988 Base Document:1968 | FIRING AND SAFING SQUIB-SWITCH MODULE ASSEMBLIES |
| MIL-M-63146 Base Document:1977 | MINE, AT, PRACTICE M19, INERT AND FUZE, MINE, AT, PRACTICE, M606, INERT PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL M 60933 : 0 | MINE ANTIPERSONNEL, BLU-42/B LOADING, ASSEMBLING AND PACKING |
| MIL-F-50521 Base Document:1970 | FUZE, PD, M536: DELAY DETONATOR ASSEMBLY FOR METAL PART |
| MIL F 14930 : NOTICE 1 | FUSE, DUMMY T 185 E3 |
| MIL-B-12719 Revision C:1973 | BAG, CANVAS, CARRYING FOR DEMOLITION EQUIPMENT |
| MIL-T-60916 Revision C:1991 | TUBE, MOTOR, INTEGRAL BULKHEAD FOR ROCKET MOTOR 2.75 INCH, MARK 4 AND MARK 40 |
| MIL-P-50585 Base Document:1970 | PROJECTILE 8 INCH, HE, M404 HARDWARE FOR |
| MIL-F-48173 Base Document:1973 | FUZE, M814, TACTICAL AND TELEMETRY PARTS, ASSEMBLING, LOADING AND PACKING FOR |
| MIL-B-63524 Revision A:1988 | BATTERY, HED, SINGLE CELL, PRIMARY RESERVE |
| MIL-L-70830 Base Document:1989 | LEAD, HNS TEST, ASSEMBLY & PACKAGING FOR |
| MIL-F-50994 Base Document:1972 | FUZE, ROCKET M423 MODIFIED (BUNKER) LESS BOOSTER AND LEAD |
| MIL C 18757 : D | CARTRIDGE CASES, STEEL (OTHER THAN SMALL ARMS), GENERAL SPECIFICATION FOR |
| MIL S 51430 : B | SLEEVE ASSEMBLY |
| MIL-C-85717 Base Document:1986 | CARTRIDGE, 20 MILLIMETER, SEMI-ARMOR PIERCING HIGH EXPLOSIVE INCENDIARY, PGU-28/B |
| MIL-D-50998 Base Document:1971 | DETONATOR, STAB, M76 |
| MIL-W-48272 Base Document:1973 | WARHEAD SECTION, GM, HE: M251, M251A1 & M251 (MOD) WITH LIVE FLSC & INERT BOMBS, DUMMY LOADING, ASSEMBLING & PACKING |
| MIL S 003793 : C NOTICE 2 | SMOKE POT, HC, 30 POUND, ABC-M5 COMPONENTS FOR |
| MIL-F-50524 Base Document:1970 | FUZE, PD. M536; LESS BALL ASSEMBLY; METAL PARTS FOR |
| MIL-B-11007 Revision E:1968 | BURSTER, BOMB, AN-M20 |
| MIL M 50512 : 0 | MINE, APERS, PRACTICE, M68 ASSEMBLING AND PACKING |
| MIL-B-50873 Revision A:1971 | BAG, BARRIER, ELASTOMERIC |
| MIL-L-12997 Revision F:1983 | LINK, CARTRIDGE, METALLIC BELT, 20MM, M12 |
| MIL-DTL-32047 Base Document:1999 | INITIATOR, CARTRIDGE ACTUATED, JAU-59/A (MT06) |
| MIL P 60340 : A | PROJECTILE, 155MM, SMOKE, HC, BE, M116E2, PARTS FOR |
| MIL-P-60384 Base Document:1967 | PROPELLANT M6 FOR USE IN CHARGE, PROPELLING, (GREEN BAG) 175MM, XM124 |
| DEFSTAN 13-98/3(1999) : 1999 | REQUIREMENTS FOR THE PROVISION OF AMMUNITION TECHNICAL DATA |
| MIL-F-50905 Base Document:1971 | FUZE, ROCKET, M427, MOD 5 LOADING ASSEMBLING AND PACKING |
| MIL-C-70810 Base Document:1991 | Combustible Cartridge Case Assembly Parts Nitrocellulose Paper Process, for Charge, Propelling, 155MM, M203A1 |
| MIL C 82922 : 1994 | CARTRIDGE, IMPULSE, CCU-123/E (EARTH ANCHOR CARTRIDGE) |
| MIL-C-85253 Base Document:1981 | CODE DETONATING |
| MIL C 82884 : 1993 | CARTRIDGE, IMPULSE CCU-69A/A |
| MIL-DTL-32099 Revision D:2011 | CARTRIDGE, IMPULSE, CCU-145/A |
| MIL-F-12869 Revision H:1971 | FUSE, POINT DETONATING, M524A6 PARTS FOR |
| MIL C 48568 : B | CATAPULT, AIRCRAFT EJECTION SEA, CKU-7/A ASSEMBLY |
| MIL-DTL-60292 Revision B:2012 | INITIATOR, CARTRIDGE ACTUATED, M99 ASSEMBLY |
| MIL-T-46238 Revision E:1973 | TEST SET, ELECTRICAL, M40 PARTS FOR, ASSEMBLING AND PACKING |
| MIL-P-60812 Base Document:1968 | PROJECTILE, 4.2INCH, WP, SMOKE, M328A1 METAL PARTS ASSEMBLY |
| MIL-F-2098 Revision D:1968 | FUZE, PD, M503A2, LESS PELLETS, BOOSTER AND BOOSTER LEAD, LOADING, ASSEMBLING AND PACKING AND METAL PARTS FOR |
| MIL-B-60023 Revision A:1971 | BAG ASSEMBLY, FOR CHARGE DEMOLITION, BLOCK, M5A1 AND CHARGE ASSEMBLY DEMOLITION, M183 |
| MIL-P-11329 Revision E:1983 | PRIMER, ELECTRIC, M59, PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-P-85723 Base Document:1986 | PROJECTILE, 20 MILLIMETER, SEMI-ARMOR PIERCING, HIGH EXPLOSIVE INCENDIARY PGU-28/B |
| MIL-PRF-14977 Revision C:1997 | SQUIB, MARK 1 MOD 0 FOR 2.75 INCH ROCKET |
| MIL W 50549 : A NOTICE 3 | WARHEAD, 2.75 INCH ROCKET, FLECHETTE, WDU-4A/A, WDU-13/A, PARTS FOR |
| MIL S 14977 : B | SQUIB, MARK 1 MOD 0 FOR 2.75 INCH ROCKET |
| MIL-W-14742 Revision A:1972 | WARHEAD SECTION, GUIDED MISSILE, PRACTICE, M220, ASSEMBLING AND PACKING |
| MIL H 45444 : B (4) | |
| MIL-P-18716 Revision C:1991 | PRIMER, ELECTRIC, MARK 48 MOD 2 |
| MIL-B-60381 Revision B:1972 | BURSTER, PROJECTILE, XM53 LOADING ASSEMBLING AND PACKING |
| MIL F 14715 : A | FUSE, TIME, M84A1 METAL PARTS FOR |
| MIL P 85759 : 0 | PROPELLANT GRAIN, MARK 93 MOD O |
| MIL-DTL-82889 Revision A:2004 | DETONATING CORD ASSEMBLY (DCA) |
| MIL F 51193 : C NOTICE 1 | FILTER, GAS, 10 CFM, M18 |
| MIL-D-51048 Revision F:1976 | DECONTAMINATING APPARATUS, PORTABLE, DS2, 1-1/2 QUART, M11 |
| MIL I 85581 : 0 | INTERVALOMETER, ROCKET LAUNCHER, REUSABLE |
| MIL-R-50753 Revision A:1972 | ROCKET MOTOR M199 ASSEMBLY |
| MIL-DTL-2439 Revision G:2014 | CONTAINER, AMMUNITION, FIBER, SPIRALLY WOUND |
| MIL-O-48268 Base Document:1973 | |
| MIL I 60286 : B NOTICE 2 | INITIATOR, CARTRIDGE ACTUATED, M53, ASSEMBLY |
| MIL-P-50536 Base Document:1970 | PROJECTILE 155MM HE, M449A1 BASE PLUG FOR |
| MIL-F-48168 Base Document:1973 | FLECHETTE, THIRTEEN GRAIN |
| MIL-B-48201 Base Document:1972 | BREECH BLOCK AND PIN ASSEMBLY |
| MIL-T-85630 Base Document:1983 | TUBE MOTOR, FOR 2.75 INCH ROCKET MARK 66 |
| MIL-S-48290 Base Document:1974 | SWITCH, ANTI-DISTURBANCE FOR M56 MINE |
| MIL-S-48380 Base Document:1975 | SUPPORT, PROPELLING CHARGE (FOR USE IN AMMUNITION PACKING) |
| MIL-F-50877 Base Document:1971 | FIN & CLOSURE ASSEMBLY FOR ROCKET MOTOR 2.75 INCH SR 105 PARTS OF |
| MIL-P-46489 Revision C:1974 | PROPELLANT, M30 FOR USE IN CARTRIDGE, 105MM, APDS-T, M392A2 |
| MIL-DTL-32127 Revision A:2005 | CATAPULT, AIRCRAFT EJECTION SEAT, CKU-5C/A ASSEMBLY |
| MIL R 85769 : 1986 | ROCKET MOTOR, MK 117 MOD O |
| MIL C 22653 : C | CARTRIDGE, IMPULSE, MARK 19 MOD O |
| MIL I 85760 : 0 | IGNITER, MK 304 MOD O |
| MIL-C-82733 Revision A:1988 | CARTRIDGE, IMPULSE, CCU-22/A/A ASSEMBLY |
| MIL B 60426 : A | BURSTER, PROJECTILE, XM54, LOADING, ASSEMBLING AND PACKING |
| MIL-STD-483 Revision A:1985 | CONFIGURATION MANAGEMENT PRACTICES FOR SYSTEMS, EQUIPMENT, MUNITIONS, AND COMPUTER PROGRAMS |
| MIL-X-48399 Base Document:1974 | X-RAY ASSEMBLY, LIGHT WEIGHT ASSEMBLING AND PACKING |
| MIL-C-60996 Revision A:1968 | CHARGE, DEMOLITION ROLL, M186 PARTS, LOADING, ASSEMBLING AND PACKING |
| MIL C 51362 : 0 | CANISTER, COLOR SMOKE, 105MM, SHELL, M2, COMPONENTS FOR |
| MIL-M-48752 Base Document:1975 | MINE, ANTI-TANK, PRACTICE, XM76 |
| MIL-H-48269 Base Document:1974 | HMX/KEL-F RESIN MOLDING POWDER (FOR USE IN AMMUNITION) |
| MIL-C-48059 Base Document:1972 | CHARGE, PROPELLING FOR CARTRIDGE, 105MM, HEP-T, M327, LOADING, ASSEMBLING AND PACKING |
| MIL-C-51515 Base Document:1986 | CARTRIDGE, 5.56 MM: BLANK, M755 |
| MIL-C-50912 Base Document:1971 | CARTRIDGE, 152MM, CANISTER, M625A1 LOADING, ASSEMBLING AND PACKING |
| MIL-T-50886 Base Document:1971 | TAPE, INSULATION, ELECTRICAL |
| MIL-C-1314 Revision B:1973 | CARTRIDGE, CALIBER .45, TRACER, M26 |
| MIL-C-48551 Base Document:1975 | CARTRIDGE, CALIBER .38, SPECIAL, BALL, PGU-12/B |
| MIL-W-50930 Base Document:1971 | WARHEAD SECTION 762MM ROCKET TRAINING M42' |
| MIL-B-48008 Base Document:1972 | BATTERY, THERMAL, XM97 |
| MIL-M-48386 Base Document:1975 | MINE, APERS, PRACTICE, M68E1 (WITH ACCESSORIES) ASSEMBLING AND PACKING |
| MIL-A-46556 Revision B:1966 | ACTUATOR, EXPLOSIVE, LINEAR, M2 LOADING, ASSEMBLING AND PACKING |
| MIL-PRF-32293 Base Document:2008 | Cap, Blasting, Electric - M6 |
| MIL C 71140 : 0 | CARTRIDGE, 25mm TARGET PRACTICE TRACER, M793 |
| MIL-C-48758 Base Document:1975 | CARTRIDGE, 90MM, TP-T, M764 LOADING, ASSEMBLING AND PACKING |
| MIL-P-48077 Base Document:1972 | PRIMER, M104 PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-B-82572 Revision A:1989 | BOMB, GENERAL PURPOSE, MARK 84, 2000 POUND, EXPLOSIVE LOADING ASSEMBLING AND PACKING |
| MIL-F-48700 Base Document:1979 | FUZE, ELECTRONIC TIME, M587 (LOADING, ASSEMBLING, AND PACKING) |
| MIL-C-48294 Base Document:1974 | CONTAINER, SHIPPING AND STORAGE, MINE CANISTER. M602 |
| MIL-C-46635 Revision C:1973 | CARTRIDGE, 20MM, HIGH PRESSURE TEST M5 4A1 |
| MIL-P-11635 Revision C:1987 | PROJECTILE, 57 MM, SMOKE, WP, M308A1: FILLING ASSEMBLY |
| MIL-P-14901 Base Document:1968 | PROJECTILE, 4.2 INCH, TACTICAL CS, XM633 LOADING, ASSEMBLING AND PACKING (FOR CARTRIDGE, TACTICAL CS, XM630) |
| MIL-W-14718 Revision A:1969 | WARHEAD, GUIDED MISSILE, TRAINING, XM237E1, LOADING, ASSEMBLING AND PACKING |
| MIL-P-50526 Revision A:1974 | PROJECTILE, 8 INCH, HE: M404, BODY ASSEMBLY AND BASE PLUG FOR |
| MIL-DTL-48360 Revision A:2014 | Charge, Propelling, M200, for 105MM Howitzer, M119 Loading, Assembling and Packing |
| MIL-W-50932 Base Document:1971 | WARHEAD SECTION, 762MM ROCKET, TRAINING: M42, OGIVE FOR |
| MIL C 46552 : C | CARTRIDGE, 20MM, TARGET PRACTICE, M55A2 |
| MIL-HDBK-1461 Revision A:1999 | AMMUNITION MANUFACTURERS AND THEIR SYMBOLS |
| MIL-M-50808 Base Document:1971 | MINE, AT, PRACTICE XM69 LOADING ASSEMBLING AND PACKING |
| MIL-F-60044 Revision A:1968 | FUZE, BASE DETONATING, M62A2 LOADING, ASSEMBLING AND PACKING |
| MIL-P-60033 Revision B:1966 | PROPELLANT, T36E1, FOR USE IN CHARGE PROPELLING 155MM, XM119 (SUPERCHARGE) |
| MIL G 50250 : NOTICE 1 | GRENADE, HAND, PRACTICE, DELAY, M62 LOADING, ASSEMBLING AND PACKING |
| MIL-C-00401 Revision F:1986 | COMPOSITION B |
| MIL-R-46204 Revision C:1966 | RELAY, XM9 LOADING, ASSEMBLING AND PACKING |
| MIL-P-46412 Revision C:1966 | PROJECTILE,155MM, GAS, M121A1 ASSEMBLING, MARKING AND PACKING |
| MIL P 48232 : 0 | PROPELLING CHARGE ASSEMBLY FOR ROCKETS, 3.5 INCH, HEAT M28A2, PRACTICE M29A2, AND WPM30 |
| MIL-P-18948 Revision B:1992 | PROJECTILE, PAINTING, MARKING AND GREASING (BY PROJECTILE MANUFACTURERS) |
| MIL-P-18704 Revision A:1992 | PRIMER, LOCK, COMBINATION, MARK 15 MOD 2 |
| MIL D 48561 : A | |
| MIL-DTL-32083 Revision A:2004 | CARTRIDGE, FIRE EXTINGUISHER, MK 272 MOD 0 |
| MIL-DTL-70438 Revision A:2008 | Plug Assembly, Lifting, Universal |
| MIL-M-3281 Revision A:1982 | MANGANESE DIOXIDE, TECHNICAL |
| MIL C 18757/1 : B | CARTRIDGE CASE, STEEL, 40 MILLIMETER, MK 3 MOD 0 |
| MIL-DTL-22653 Revision D:2000 | CARTRIDGE, IMPULSE, MARK 19 MOD 0 |
| MIL-P-46484 Revision A:1972 | PROPELLANT, M6, FOR USE IN CARTRIDGE, 76MM, HEAT TM496 |
| MIL-STD-1461 Revision E:1990 | AMMUNITION MANUFACTURERS AND THEIR SYMBOLS |
| MIL-F-48033 Base Document:1972 | FUZE, POINT INITIATING, BASE DETONATING M539, LOADING, ASSEMBLING AND PACKING |
| MIL-A-70604 Base Document:1988 | AMINE BONDING AGENT |
| MIL-PRF-32056 Base Document:1999 | CARTRIDGE, 10 GAUGE SHOTSHELL, BLANK |
| MIL-PRF-82736 Revision A:1988 | IGNITION PELLETS, MAGNESIUM-FLUOROCARBON |
| MIL C 71167 : 0 | CARTRIDGE, 7.62mm, M973 BALL SHORT RANGE TRAINING AMMUNITION, PERFORMANCE SPECIFICATION FOR |
| MIL R 48813 : 0 | RING, ADAPTOR, FOR M75 ADAPTION KIT |
| MIL-T-48295 Base Document:1974 | TEST SET, ELECTRICAL CIRCUIT, BOMB DISPENSER A/E 24T-79 |
| MIL D 50484 : 0 | DISPENSER AND BOMB, AIRCRAFT CBU25B/A LOADING, ASSEMBLING AND PACKING |
| MIL-P-2496 Revision D:1967 | PRIMER PERCUSSION, M29A1 PARTS AND LOADING, ASSEMBLING AND PACKING |
| MIL-L-16355 Revision E:1993 | LEAD STYPHNATE, BASIC |
| MIL-B-48024 Base Document:1972 | BOXES, AMMUNITION PACKING: WOOD, (W/PLYWOOD TOP AND BOTTOM) NAILED |
| MIL-F-46298 Revision C:1974 | FIRING DEVICE, PULL RELEASE TYPE, M3 PARTS, LOADING, ASSEMBLING AND PACKING |
| MIL-PRF-82537 Revision A:1988 | CASE, CARTRIDGE, STEEL, SPIRAL-WRAPPED 40 MILLIMETER (MM) AM LARGER CAMBERS, GENERAL SPECIFICATION FOR |
| MIL-D-48889 Base Document:1976 | DELAY ELEMENT, PA 500, FOR MINE M16 |
| MIL-DTL-60426 Revision B:2006 | BURSTER, PROJECTILE - M54A1 |
| MIL-DTL-757 Revision C:2012 | Lead Styphnate, Normal |
| NASA MSFC SPEC 3635 : 2012 | PYROTECHNIC SYSTEM SPECIFICATION |
| MIL-DTL-2156 Revision D:2010 | CHARGE, DEMOLITION, SHAPED, 15 LB. - M2A4 LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-82965 Revision B:2001 | PROPELLANT, GUN, HIGH ENERGY NITRAMINE |
| MIL-M-50806 Base Document:1971 | MINE AT XM66 PARTS 1345 L |
| MIL C 71168 : 0 | CARTRIDGE, 7.62mm, M974 TRACER SHORT RANGE TRAINING AMMUNITION PERFORMANCE SPECIFICATION FOR |
| MIL-B-46415 Revision B:1966 | BURSTER, PROJECTILE, M35, PARTS FOR LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-417 Revision H:2012 | Adapter, Priming: M1A5. |
| MIL-DTL-440 Revision D:2015 | Composition A-3 and A-4 |
| MIL-C-51355 Revision A:1979 | CARTRIDGE, 40 MM, CS, M651 |
| MIL-DTL-50863 Revision D Interim Revision:2004 | CARTRIDGE, 40 MM - HEDP, M430A1 |
| MIL-M-10452 Revision C:1984 | MONOCHLOROACETIC ACID, TECHNICAL |
| MIL DTL 51193 : D | FILTER, GAS, 10 CFM, M18A1 |
| MIL-DTL-32028 Base Document:1998 | CORD, DETONATING ASSEMBLY |
| MIL-F-50519 Base Document:1970 | FUZE, PD, M536, SEPARATION CHARGE FOR LOADING, ASSEMBLING AND PACKING |
| MIL-C-60085 Revision D:1970 | CABLE ASSEMBLY, FMU-7C/B |
| MIL-DTL-10058 Revision J:2010 | SIMULATOR, PROJECTILE, GROUND BURST - M115A2 |
| MIL-STD-1167 Revision C:1985 | AMMUNITION DATA CARD |
| MIL-DTL-32415 Base Document:2012 | Dummy Cap, Blasting: Non-Electric, 5 Minute Inert Time Fuse Delay-M32 |
| MIL C 50523 : 0 | CHARGE, DEMOLITION, M112, PARTS FOR & LOADING, ASSEMBLING & PACKING |
| MIL-C-14747 Base Document:1968 | CARTRIDGE, 105 MM, APERS-T, M494 FOR 105 MM GUN M68 LOADING, ASSEMBLING AND PACKING |
| MIL-F-60342 Revision A:1972 | FUZE, POINT DETONATING, M525 LOADING, ASSEMBLING AND PACKING |
| MIL C 70663 : B | CARTRIDGE, CALIBER .50, SLAP (SABOTED LIGHT ARMOR PENETRATOR) - XM903 |
| MIL-DTL-60315 Revision C:2007 | CHARGE, PROPELLING, M67, FOR 105MM HOWITZER LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-82960 Revision B:2010 | INITIATOR, PROPELLANT ACTUATED, JAU-27/A (MF72) |
| MIL-S-50786 Revision G:1993 | SKID BASE WOOD, FOR UNITIZATION OF BOXED AMMUNITION |
| MIL-DTL-82962 Revision J:2011 | CARTRIDGES, IMPULSE, CCU-136/A, CCU-138/A, AND CCU-136A/A |
| MIL-C-70461 Revision D:1991 | Combustible Cartridge Case Assembly Parts for Charge, Propelling, 155MM, M203A1 |
| MIL-C-50600 Revision A:1977 | CARTRIDGE, 20MM: TARGET PRACTICE-TRACER, M206A1 |
| MIL C 60896 : A | CARTRIDGE, 7.62 MM, NATO, REFERENCE |
| MIL F 50907 : NOTICE 1 | FIRING DEVICE, ANTI PERSONNEL MINE, XM 123 PARTS & ASSEMBLY |
| DOD C 64018 : 0 | CARTRIDGE, 30MM, HIGH PRESSURE TEST, HP-T, M883 |
| MIL-F-60988 Revision B:1973 | FUZE, PD, M551 LESS BOOSTER |
| MIL-P-46292 Revision C:1975 | PRIMER, PERCUSSION, MAB1A2, LOADING, ASSEMBLING, AND PACKING |
| MIL-C-60609 Revision A:1973 | CARTRIDGE, 20MM, TARGET PRACTICE TRACER, M220 |
| MIL-C-60028 Revision C:1969 | CARTRIDGE, 81MM, SMOKE, WP, M375 AND M375A2 ASSEMBLING, MARKING AND PACKING |
| MIL-F-63463 Base Document:1979 | FILM, INHIBITING, ETHYL, CELLULOSE |
| MIL-P-48239 Base Document:1973 | POWDER, PHOTOFLASH |
| MIL-M-60079 Revision C:1973 | MOTOR ASSEMBLY, BELLOWS |
| MIL-I-14961 Base Document:1969 | INCREMENT, PROPELLANT M1A1, M2A1, M3A1, M181,AND M182 (MADE FROM PROPELLANT M8) |
| MIL-R-48270 Base Document:1974 | RDX/KEL-F RESIN MOLDING POWER (FOR USE IN AMMUNITION) |
| MIL G 0012327 : H | GRENADE, HAND, SMOKE H |
| MIL-P-46297 Revision C:1966 | PRIMER, PERCUSSION, M82 METAL PARTS FOR |
| MIL-F-48137 Revision A:1976 | FUSE, GM, ET, LANCE, XM819 PARTS, LOADING, ASSEMBLING AND PACKING |
| DOD C 63982 : (9) | CARTRIDGE, 30MM HIGH EXPLOSIVE DUAL PURPOSE, M789 |
| MIL-C-46216 Revision B:1969 | CARTRIDGE, 105 MM, APDS-T, M392A2 LOADING, ASSEMBLING AND PACKING |
| MIL-F-48702 Base Document:1979 | FUZE, ELECTRONIC TIME, M724 |
| MIL-DTL-60515 Revision C:2005 | INITIATOR, CARTRIDGE ACTUATED, DELAY, M30A1, M32A1, M43A1, M92, AND M120 METAL PARTS ASSEMBLY |
| MIL C 1318 : B | CARTRIDGE, CALIBER .50 TRACER, M17 |
| MIL-A-45899 Base Document:1977 | ADAPTION KIT, SUBASSEMBLY, ATOMIC WEAPON: XM7 |
| MIL-DTL-32011 Base Document:1997 | IGNITION DEVICE, PVU-8/A |
| MIL-E-48225 Base Document:1973 | ETHYLENE GLYCOL DINITRATE (EGDN) |
| MIL-DTL-32411 Base Document:2012 | Igniter, Time Blasting Fuse: with Shock Tube Capability - M81, Load, Assemble, and Pack |
| MIL-DTL-50869 Revision F Interim Revision:2004 | Fuze, Point Initiating, Base Detonating (PIBD) - M550, Less Spitback Assembly Loading, Assembling, and Packing |
| MIL C 60315 : B | CHARGE, PROPELLING, M67, FOR 105 MM, HOWITZER LOADING, ASSEMBLING AND PACKING |
| DEFSTAN 13-96(PT1)/2(1987) : 1987 | LOTTING AND BATCHING OF AMMUNITION - GENERAL REQUIREMENTS |
| MIL-D-48178 Base Document:1973 | DYE, DIETHLYAMINO-AZOBENZENE (FOR COLORED SMOKE MIXTURES) |
| MIL-P-50841 Base Document:1974 | PACKAGES 1,2 & 3 OF 3 FOR ADAPTION KIT, ATOMIC WARHEAD TO GUIDED MISSILE XM248 |
| MIL-I-46437 Revision B:1970 | IGNITER, DOCUMENT DESTROYER, INCENDIARY, M25 |
| MIL-R-50431 Revision A:1974 | ROCKET, HE, 66MM. ANTITANK, M72A2, W/COUPLER OR M74A3, LOADING, ASSEMBLING AND PACKING |
| MIL-P-85662 Base Document:1985 | PROPELLANT, BALL, 25 MM, ARMOR PIERCING INCENDIARY (API) PGU-20/U |
| MIL-C-51459 Base Document:1979 | CANISTER, CHEMICAL PROJECTILE: 8 INCH, QL, XM27 |
| MIL-F-50421 Base Document:1969 | FUZE, XM596: SETBACK PIN AND HOUSING ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKING |
| MIL-P-46642 Revision C:1968 | PRIMER, PERCUSSION, M93E1 LOADING, ASSEMBLING AND PACKING |
| MIL-S-63523 Revision A:1985 | SIMULATOR, LAUNCHING, ANTI-TANK, GUIDED MISSILE AND ROCKET, M22, PERFORMANCE SPECIFICATION |
| MIL C 46594 : B | CHARGE, DEMOLITION, SHAPED. 40 LB, M3A1 AND M3 PRACTICE, LOADING, ASSEMBLING AND PACKING |
| MIL-I-50412 Base Document:1970 | INITIATOR ASSEMBLY FOR PRIMER, ELECTRIC, XM91E1 AND XM117, PARTS FOR |
| MIL-T-48140 Base Document:1973 | TUNGSTEN POWDER (FOR PYROTECHNICS) |
| MIL-A-23404 Revision A:1982 | ADAPTER KIT, MARINE MARKER MK 34 MOD O |
| MIL-I-48145 Base Document:1973 | IGNITER TUBE |
| MIL-M-13685 Revision F:1973 | MINE, AT, NM, M19 WITH ARMING WRENCH M22 LOADING ASSEMBLING AND PACKING |
| MIL-R-50858 Revision C:1979 | ROCKET, PRACTICE, 35MM SUBCALIBER, M73 PARTS FOR LOADING & ASSEMBLING |
| MIL-P-60049 Revision A:1974 | PRIMER, STAB M26 PARTS FOR, LOADING, ASSEMBLING AND PACKING |
| MIL-C-85656 Base Document:1985 | CARTRIDGE, 25 MM, HIGH EXPLOSIVE INCENDIARY (M5) PGU-25/U |
| MIL-B-55291 Revision C:1970 | BATTERY, THERMAL |
| MIL C 82537 : A | CASE, CARTRIDGE, STEEL, SPIRAL WRAPPED 40 MILLIMETER (MM) AND LARGER CALIBERS, GENERAL SPECIFICATION FOR |
| MIL-C-63367 Base Document:1980 | CARTRIDGE, 5.56MM, TRACER, XM778 |
| MIL-F-51532 Base Document:1987 | FLUID CONTAINER ASSEMBLY, TRAINING |
| MIL-L-45550 Revision A:1972 | LINK, CARTRIDGE, METALLIC BELT, CALIBER .50, M15A2 |
| MIL-C-46397 Revision C:1985 | CARTRIDGE, 5.56mm, REFERENCE |
| MIL-B-46413 Revision C:1966 | BURSTER, PROJECTILE, M71 LOADING ASSEMBLING AND PACKING |
| MIL-M-10891 Revision C:1982 | METHYLPHOSPHONIC DICHLORIDE, TECHNICAL |
| MIL-P-50265 Base Document:1969 | PRIMER, ELECTRIC, XM114 PARTS FOR,AND LOADING, ASSEMBLING AND PACKING |
| MIL-P-48250 Base Document:1974 | PRIMER, STAB, M55 PARTS AND LOADING, ASSEMBLING, AND PACKING |
| MIL-DTL-82909 Revision A:2003 | Batteries, Thermal, MXU-792A/A and 792B/A |
| MIL-DTL-14803 Revision B:2005 | INITIATOR, CARTRIDGE ACTUATED, DELAY, M30A1, M32A1, M92, M43A1, AND M120 REMANUFACTURED METAL PARTS ASSEMBLY |
| MIL-DTL-45468 Revision F:2012 | Cap, Blasting: Electric - M6 Parts for, and Loading, Assembling and Packing |
| MIL-C-48132 Base Document:1972 | CARTRIDGE, 106 MM, PRACTICE, M344A1, W/INERT PROJECTILE, W/O FUSE LOADING, ASSEMBLING AND PACKING |
| MIL C 63989 : C | CARTRIDGE, 5.56MM, BALL, M855 |
| MIL-W-14960 Revision B:1971 | WARHEAD, GUIDED MISSILE HE, XM155E1, AND WARHEAD, GUIDED MISSILE TRAINING, XM237E1, PARTS FOR |
| MIL-DTL-32087 Revision C:2011 | INFLATION DEVICE, AUTOMATIC, FLU-8B/P AND FLU-9B/P |
| MIL-L-3055 Revision C:1992 | LEAD AZIDE |
| MIL-A-166 Revision C:1975 | AMMONIUM PICRATE (EXPLOSIVE D) |
| MIL-F-60083 Revision E:1970 | FUZE BOMB, ELECTRIC, FMC-7B/B |
| MIL-P-50981 Revision A:1973 | PROPELLANT CHARGE ASSEMBLY FOR ROCKET PRACTICE 35MM SUBCALIBER,M73 FUZE,MT,,SQ,M577 LOADING ASSEMBLING, PACKING & METAL PARTS FUZE MT, SQ, M582 METAL PARTS |
| MIL-P-51458 Base Document:1979 | PROJECTILE 8 INCH VX-2 XM736 WITHOUT CANISTER, NM XM28 LOADING ASSEMBLY AND PACKING |
| MIL-S-48251 Base Document:1973 | SIGNALS, ILLUMINATION, AIRCRAFT DOUBLE-STAR AN-M37A2 THROUGH AN-M42A2 (ALTERNATIVE CASE) PARTS, AND LOADING, ASSEMBLING AND PACKING |
| MIL-T-46938 Revision C:1994 | TETRACENE |
| MIL-C-45113 Revision B:1983 | COMPOSITION B-3 |
| MIL-W-50259 Base Document:1969 | WARHEAD SECTION, 762MM ROCKET, PRACTICE, M38 LOADING, ASSEMBLING AND PACKING. |
| MIL-B-13393 Revision E:1986 | BOMB, SMOKE OR INCENDIARY, AN-M47A4, 100 LB; INERT COMPONENTS FOR |
| MIL-C-11609 Revision E:1972 | CARTRIDGE, IGNITION, M5A2, M6 AND M8 LOADING, ASSEMBLING AND PACKING |
| MIL C 46280 : E | CARTRIDGE, IGNITION, M66A1 LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-60377 Revision C:2007 | PROJECTILE, 155 MM, HE, M107 LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-32018 Base Document:2001 | CORD ASSEMBLY, MILD DETONATION, CANOPY PERIPHERY, P/N 837AS118 |
| MIL-DTL-45417 Revision D:2014 | Bandoleer, APERS, Mine, M7, Assembly |
| MIL-W-71069 Base Document:1992 | WARHEAD, 2.75 INCH ROCKET, FLECHETTE - XM255E1 |
| MIL-DTL-248 Revision D:2002 | TRINITROTOLUENE (TNT) |
| MIL-DTL-10057 Revision J:2010 | SIMULATOR, HAND GRENADE - M116A1 |
| MIL-C-60352 Base Document:1965 | CHARGE, PROPELLING, XM121 FOR CARTRIDGE, 105MM |
| MIL-T-48291 Base Document:1974 | TEST SET, ELECTRICAL CIRCUIT, BOMB DISPENSER A/E 24T-80 |
| MIL-M-46696 Revision D:1974 | MINE ANTIPERSONNEL, M16A2, LOADING, ASSEMBLING AND PACKING |
| MIL-P-46463 Revision C:1966 | PRIMER, PERCUSSION, M71A1 PARTS FOR |
| MIL B 3060 : E | BOXES, SMALL ARMS AMMUNITION: M19A1 AND M2A1 |
| MIL-P-50535 Base Document:1970 | PROJECTILE, 155MM, HE, M449A1, BODY ASSEMBLY FOR |
| MIL-D-46647 Revision B:1966 | DETONATOR, STAB, XM58, LOADING, ASSEMBLING AND PACKING |
| MIL-Z-12061 Revision B:1983 | ZINC CARBONATE, BASIC, TECHNICAL |
| MIL-C-51449 Base Document:1978 | CANISTER, 2.75 WP |
| MIL C 51428 : B | CANISTER, CHEMICAL PROJECTILE, OPA M21 |
| MIL S 50419 : A NOTICE 1 | SPACER, FOR 2.75 INCH ROCKET, MARK 40 AND MARK 4 |
| MIL-P-60354 Base Document:1966 | PROPELLANT, M9 (FOR USE IN M19A2 SIGNAL) |
| MIL-P-48240 Base Document:1974 | PYROTECHNIC FIRST FIRE COMPOSITIONS |
| MIL C 38618 : A | COUPLER, DRIVE ASSEMBLY GOVERNOR, FUZE BOMB MAU 87A B |
| MIL-DTL-82946 Revision A:2008 | CARTRIDGE, AIRCRAFT FIRE EXTINGUISHER, CCU-121/A |
| MIL-DTL-46229 Revision D:2014 | Cartridge, 105MM Blank, M395 Loading, Assembling and Packing |
| MIL-C-38979 Revision A:1978 | Cartridge, Bomb Ejection CCU-1/B |
| MIL I 85756 : 0 | INCENDIARY COMPOSITION |
| MIL D 38613 : A | DRIVE, ASSEMBLY, ARMING, BOMB FUZE, ATU-35B/B |
| MIL-C-46666 Revision B:1973 | CARTRIDGE, GRENADE. 7.62MM, NATO, RIFLE, M64 |
| MIL-F-20363 Revision B:1968 | FLARE, AIRCRAFT, PARACHUTE, M8A1 PARTS FOR, AND LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-32155 Base Document:2004 | THRUSTER, CARTRIDGE ACTUATED TCU-5A/A |
| MIL-DTL-82922 Revision A:1995 | CARTRIDGE, IMPULSE, CCU-123/E (EARTH ANCHOR CARTRIDGE) |
| MIL-DTL-46540 Revision C:2006 | Case, Cartridge: 20 Millimeter -M103 |
| MIL-DTL-32121 Base Document:2005 | INITIATOR, CARTRIDGE ACTUATED JAU-73A/A |
| MIL-DTL-50512 Revision A:2010 | MINE, APERS, PRACTICE, M68 - ASSEMBLING AND PACKING |
| MIL-DTL-46550 Revision D:2011 | Charge, Demolition, Shaped, 40 Lb. M3A1, Metal Parts Assembly |
| MIL C 46281 : F | CARTRIDGE, 7.62MM, NATO, TRACER, M62 |
| MIL C 60252 : A | CARTRIDGE, 7.62MM, NATO, TRACER, M62 OVERHEAD FIRE APPLICATION |
| MIL T 43036 : B | TAPE, PRESSURE-SENSITIVE ADHESIVE, PLASTIC FILM, (FOR SEALING FIBER CONTAINERS & CANS) |
| MIL-R-50813 Base Document:1970 | ROCKET 762MM HE WARHEAD SECTION, M144 LOADING ASSEMBLING AND PACKING |
| MIL-B-60410 Base Document:1966 | BLASTING MACHINE, HANDLE OPERATED, METAL CASE 10 CAP CAPACITY |
| MIL-T-46692 Revision B:1993 | THRUSTER, CARTRIDGE ACTUATED. M16, ASSEMBLY |
| MIL-T-45499 Revision C:1993 | THRUSTER, CARTRIDGE ACTUATED, M1A2 ASSEMBLY |
| MIL-P-83126 Revision A:1980 | PROPULSION SYSTEMS, AIRCREW ESCAPE, DESIGN SPECIFICATION FOR |
| MIL C 48656 : A | CARTRIDGE, SHOTSHELL |
| MIL-DTL-32208 Base Document:2008 | CUTTER, CABLE MLU-61/B |
| MIL-DTL-45449 Revision C:2011 | Pallet, Units, Wood, for Shipment of Projectile Metal Parts and Projectile Ammunition |
| MIL-P-50784 Base Document:1973 | PROJECTILE, 105MM, HE, M1 (HF-1) METAL PARTS ASSEMBLY |
| MIL-B-50506 Base Document:1972 | BODY, ANTIPERSONNEL MINE, PRACTICE, M33 PARTS FOR LOADING, ASSEMBLING, AND PACKING |
| MIL-PRF-70600 Revision B:2012 | Cartridge, Rimfire, .22 Caliber |
| MIL F 48064 : 0 | FUSE, DUMMY, M73 METAL PARTS |
| MIL-P-48280 Base Document:1973 | POLARITY TEST PLUG |
| MIL-H-50589 Base Document:1970 | H M X FOR 30MM AMMUNITION |
| MIL-F-60348 Revision B:1968 | FUSE, POINT DETONATING, M4BA3, METAL PARTS FOR |
| MIL-D-50281 Base Document:1969 | DISCRIMINATOR, CRYSTAL |
| MIL-S-48107 Base Document:1972 | STRAP ASSEMBLY |
| MIL-W-48230 Base Document:1973 | WARHEAD, 2.75 INCH ROCKET, M229 PARTS FOR |
| MIL-DTL-48669 Revision A Interim Revision:2004 | CARTRIDGE, 40 MM - M550 ESCAPEMENT ASSEMBLY |
| MIL-F-48235 Base Document:1973 | FIRING DEVICE, ANTI PERSONNEL MINE, ELECTRICAL M57E1 PARTS FOR, ASSEMBLING AND PACKING |
| MIL-P-60015 Revision A:1975 | PRIMER, PERCUSSION, M60A1 LOADING, ASSEMBLING AND PACKING |
| MIL-D-10396 Revision D:1982 | DIMETHYL HYDROGEN PHOSPHITE, TECHNICAL |
| MIL-D-51453 Revision A:1986 | DISPERSER, RIOT CONTROL AGENT, PORTABLE, 3 GALLON, M33A1 |
| MIL-C-50261 Revision A:1973 | CARTRIDGE, IGNITION, M285 LOADING, ASSEMBLING AND PACKING |
| MIL-C-50430 Revision A:1989 | CLIP, SHORTING ASSEMBLY FOR 2.75 INCH ROCKET MOTOR (MARK 4 AND 40) |
| MIL-F-46657 Revision D:1974 | FIRING DEVICE, DEMOLITION, PULL TYPE, M1 LOADING, ASSEMBLING AND PACKING |
| MIL-T-51289 Revision B:1985 | TEST SET, FLAME THROWER - RIOT CONTROL AGENT DISPENSER, HYDROSTATIC-VOLUMETRIC, 6000 PSI, M5 |
| MIL-L-48385 Base Document:1975 | LINE, EXTENSION AND SPOOL ASSEMBLY FOR MINE, APERS, M18A1E1 |
| MIL-C-51098 Revision E:1981 | CYLINDER, NITROGEN-FILLED, PUNCTURABLE SEAL |
| MIL-DTL-82939 Base Document:2000 | SEPARATOR, EXPLOSIVE (1W18) |
| MIL-DTL-82966 Revision A:2002 | SQUIB, ELECTRIC (DELAY), SQ86 |
| MIL-P-60358 Base Document:1966 | PROPELLANT M5 FOR USE IN CHARGE, PROPELLING, XM178 FOR 90 MM, RECOILLESS RIFLE |
| MIL-DTL-82929 Revision A:2000 | INITIATOR, EXPLOSIVE ACTUATED, JAU-24/A |
| MIL-I-50857 Revision A:1991 | INNER TUBE ASSEMBLY & CONVERSION KIT, PARTS FOR |
| MIL C 50704 : A | CARTRIDGE, 7.62 MM: DIM TRACER, XM276 |
| MIL-S-60928 Revision A:1991 | SUPPORT, CHARGE, FOR 2.75 INCH ROCKET, MARK 40 AND MARK 4 |
| MIL M 82688 : 0 | MARKER, LOCATION, MARINE, MK 1 MODS 2 AND 3 |
| MIL-C-70468 Revision A:1984 | Cartridge, Dummy, 5.56mm Inert Loaded, M857 |
| MIL-M-70691 Base Document:1988 | 4,4 - METHYLENEBIS (2,6-DITERTBUTYLPHENOL) |
| MIL-F-50990 Base Document:1973 | FUZE, BOMB: MECHANICAL NOSE, THERMALLY PROTECTED, M904E4, ASSEMBLY |
| MIL P 14824 : B | PROJECTILE, H.E., 155MM, M107 METAL PARTS ASSEMBLY |
| MIL-A-11186 Revision A:1968 | ADAPTER, GRENADE PROJECTION, CHEMICAL, M2A1 |
| MIL-T-13405 Revision E:1984 | TITANIUM, TECHNICAL, POWER |
| MIL-C-46577 Revision D:1973 | CARTRIDGE, 20MM, ARMOR PIERCING INCENDIARY, M53 |
| MIL-C-12918 Revision C:1971 | CHARGE, DEMOLITION, BLOCK M5A1, ASSEMBLY PARTS FOR LOADING, ASSEMBLING AND PACKING |
| MIL-B-51373 Base Document:1973 | BOMB CLUSTER, INCENDIARY, TH3, 750 - POUND, M36E2 (W/O FUZE, FIN & WIRE) |
| MIL-DTL-63268 Revision B:2007 | Plug, Shock Attenuating and Plug, Lifting, for M107 and M804 |
| MIL-DTL-32326 Base Document:2009 | FUZE, PYROTECHNIC SELF DESTRUCT - M1162 |
| MIL I 82929 : A | INITIATOR, EXPLOSIVE ACTUATED, JAN-24/A |
| MIL-C-60021 Revision A:1964 | CASE, CARRYING M85, ASSEMBLY FOR KIT, DEMOLITION M37 |
| MIL-L-00757 Revision B:1994 | LEAD STYPHNATE, NORMAL |
| MIL-M-50805 Base Document:1971 | MINE AT XM66 LOADING, ASSEMBLING AND PACKING |
| MIL-C-14994 Base Document:1968 | CHARGE PROPELLING, 152MM, XM189 AND XM190, LOADING, ASSEMBLING AND PACKING |
| MIL-D-46206 Revision D:1966 | DELAY OR NON-DELAY ELEMENT, M9 LOADING, ASSEMBLING AND PACKING |
| MIL A 85097 : B | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS), PROCUREMENT SPECIFICATION FOR |
| MIL-A-48078 Revision A:1988 | AMMUNITION, STANDARD QUALITY ASSURANCE PROVISIONS, GENERAL SPECIFICATION FOR |
| MIL-P-48231 Base Document:1973 | PROPELLANT M6 FOR USE IN CARTRIDGE, 105 MM APERS-T, M494 |
| MIL-C-60413 Base Document:1966 | CARTRIDGE, 4.2INCH, CS SMOKE, XM630 LOADING, ASSEMBLING AND PACKING |
| MIL-G-13483 Revision B:1966 | GRENADE, HAND, OFFENSIVE, MK3A2 PARTS FOR |
| O-T-634 Revision C:1984 | TRICHLOROETHYLENE, TECHNICAL |
| MIL-R-83403 Base Document:1973 | ROCKET MOTOR SR110-AD-1 |
| MIL-DTL-32088 Revision B:2011 | INFLATION DEVICE, AUTOMATIC, FLU-12/P |
| MIL G 14912 : NOTICE 2 | GRENADE, HAND, FRAGMENTATION, M26A1 METAL PARTS FOR |
| MIL-A-48841 Base Document:1975 | ADAPTION KIT, WH, GM, M75 WITH AUXILIARIES PACKAGES 1, 2 AND 4 OF 4 |
| MIL-A-45898 Base Document:1977 | ADAPTER, WARHEAD SECTION: H4252A |
| MIL-I-12822 Revision C:1969 | IGNITER, ROCKET MOTOR, M26 PARTS AND LOADING, ASSEMBLING AND PACKING |
| MIL-P-48322 Revision B:1981 | PROJECTILE, 8 INCH HE, RA, M650 AFT WARHEAD SECTION & STRIPPABLE COATING ASSEMBLY |
| MIL-F-48248 Base Document:1973 | FUZE, IMPACT, PYROTECHNIC, XM733 METAL PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-0023933 Revision C Interim Revision:1995 | CARTRIDGE, IMPULSE, MARK 44 MOD 0 |
| MIL-P-60382 Base Document:1966 | PROPELLANT M30 FOR USE IN CARTRIDGE, 90MM, ANTI PERSONNEL, XM580 FOR GUNS M36 AND M41 |
| MIL-I-275 Revision D:1990 | IRON OXIDE, BLACK, TECHNICAL |
| MIL-DTL-85097 Revision E:2000 | USN/USMC PROPELLANT ACTUATED DEVICES (PADS) - GENERAL SPECIFICATION FOR |
| MIL-A-48100 Base Document:1977 | ADAPTION KIT, ATOMIC WARHEAD TO GUIDED MISSILE, TRAINING: XM255 |
| MIL-P-82866 Revision A:1994 | PRIMER, ELECTRIC, MARK 153 MOD 1 |
| MIL F 50864 : B | FUZE, PIBD, M549, LESS SPITBACK METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING |
| MIL-F-20405 Revision C:1974 | FUZE, BASE DETONATING, M91A2 METAL PARTS FOR |
| MIL L 45194 : G | LINK, CARTRIDGE, METALLIC BELT, 20MM: M14A2 |
| MIL-S-81340 Revision B:1979 | SIGNAL, UNDERWATER SOUND (SUS) MARK 84 AND MODS |
| MIL-R-51472 Revision A:1986 | REFILL KIT M5BA1 PERSONAL DECONTAMINATION KIT TRAINING AID |
| MIL-A-10840 Revision D:1982 | ARSENIC TRIOXIDE, TECHNICAL |
| MIL-D-51533 Revision A:1989 | DECONTAMINATING APPARATUS: PORTABLE, 14 LITER, M13 |
| MIL-P-46678 Revision B:1966 | PROJECTILE, 8 INCH, GAS, M426 ASSEMBLING, MARKING AND PACKING |
| MIL-F-48126 Base Document:1972 | FUZE, PD, M720, LOADING ASSEMBLY AND PACKING |
| MIL-C-46680 Revision B:1972 | CARTRIDGE, CALIBER .30, MATCH, M72 |
| MIL-A-50233 Base Document:1977 | ADAPTER, WARHEAD SECTION: H4251 |
| MIL C 60006 : A NOTICE 2 | CAP, NOSE FOR ROCKET, HE, 66MM. ANTI TANK, M72 ASSEMBLING AND PACKING |
| MIL-B-49041 Base Document:1974 | BATTERY, DRY BA-1579/U |
| MIL S 46528 : E | SIMULATOR, ATOMIC EXPLOSION, M142 PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL L 0016355 : D | LEAD STYPHNATE, BASIC |
| MIL B 51480 : B NOTICE 2 | BOMB, BINARY CHEMICAL (WITHOUT BALLONET) BLU-80/B |
| MIL R 398 : C | |
| MIL P 51434 : C | PROJECTILE, 155MM, GB2, M687, WITHOUT CANISTER: DF, M20 |
| MIL-E-46201 Revision B:1966 | ELEMENT, RELAY, XM-PARTS FOR REVIEWER: EA |
| MIL D 12957 : C | DESTRUCTOR, HE, UNIVERSAL, M10 ASSEMBLY PARTS, LOADING, ASSEMBLING AND PACKING |
| MIL-W-10842 Revision A:1982 | WAX, MICROCRYSTALLINE (METRIC) |
| MIL-W-60425 Base Document:1967 | WARHEAD, 2.75INCH ROCKET, PRACTICE XM230, WITH OR WITHOUT FUSE LOADING ASSEMBLING AND PACKING |
| MIL-C-38983 Revision A:1992 | CARTRIDGE, IMPULSE, CCU-11/B |
| MIL-W-48271 Revision A:1984 | WARHEAD METAL PARTS ASSEMBLY M251 PARTS AND ASSEMBLING |
| MIL-G-46690 Revision E:1976 | GRENADE, HAND RIFLE, SMOKE, WP, M34 FILLING AND ASSEMBLY |
| MIL-C-71144 Base Document:1994 | CHARGE, PROPELLING, M229, FOR 105 MM HOWITZER LOADING, ASSEMBLING AND PACKING |
| DI L 3317 : A | DATA CARDS FOR EXPLOSIVE ASSEMBLIES, SUB-ASSEMBLIES, AND PARTS |
| MIL F 38642 : A | FIN ASSEMBLY, BOMB, MXU-469/B AND MXU-467/B |
| MIL-PRF-48656 Revision B:1999 | Cartridges, Shotshell |
| MIL-DTL-70745 Revision A:2011 | Strip, Ammunition, Metallic - 30 MM |
| MIL-R-51344 Revision B:1982 | ROCKET, INCENDIARY, 66 MM TPA 4 ROUND CLIP, M74 OR M74A1 |
| MIL-STD-1576 Base Document:1984 | ELECTROEXPLOSIVE SUBSYSTEM SAFETY REQUIREMENTS AND TEST METHODS FOR SPACE SYSTEMS |
| MIL-W-48866 Revision A:1980 | WARHEAD SECTION, GM, PRACTICE LIGHTWEIGHT, M252 AND SHIPPING AND STORAGE CONTAINER, XM612, SPARE PARTS FOR |
| MIL-W-48369 Base Document:1974 | WARHEAD SECTION, GM, PRACTICE, LIGHTWEIGHT, M252 PARTS AND ASSEMBLING |
| MIL F 0014512 : J | FILTER, GAS, 12 CFM, M12A1 |
| MIL A 002550 : C | AMMUNITION, GENERAL SPECIFICATION FOR |
| MIL-F-50576 Base Document:1970 | FLAG, RED, SAFETY PARTS, ASSEMBLY AND PACKING |
| MIL P 11751 : D | POTASSIUM HYDROXIDE SOLUTION |
| MIL-DTL-60286 Revision C:2000 | INITIATOR, CARTRIDGE ACTUATED, M53 ASSEMBLY |
| MIL-I-48279 Base Document:1973 | INTERVALOMETER ADAPTER FOR M56 AIRCRAFT SUBSYSTEM |
| MIL-P-50537 Base Document:1970 | PROJECTILE 155mm, HE M449A1 HARDWARE FOR |
| MIL-C-82865 Base Document:1989 | CARTRIDGE, IMPULSE, MARK 152 MOD 0, MARK 153 MOD 0, MARK 154 MOD 0, &MARK 155 MOD 0 |
| MIL-M-51500 Revision A:1988 | METHYLPHOSPHONIC DIFLOURIDE, TECHNICAL |
| MIL-P-50538 Base Document:1970 | PROJECTILE 155MM HE M449A1 LOADING, ASSEMBLING AND PACKING |
| MIL-A-50460 Revision A:1973 | AMMONIUM NITRATE, PRILLED (FOR USE IN AMMUNITION) |
| MIL-C-48740 Base Document:1975 | CANISTER, MINE PRACTICE, M56 SUBSYSTEM |
| MIL-C-51448 Base Document:1978 | CANISTER |
| MIL-P-82887 Base Document:1993 | PROPELLANT, M6+2 FOR THE 76 MM/62 CALIBER CARTRIDGE |
| MIL-L-50429 Revision A:1972 | Laminate, Acetal and Cloth, (for Use with 81mm Ammunition) |
| MIL-C-60303 Revision B:1971 | CARTRIDGE, 40 MM: RIOT CONTROL, CS, M674 |
| MIL-M-50256 Base Document:1969 | MINE, ANTIPERSONNEL, BLU-54/B LOADING, ASSEMBLING AND PACKING |
| MIL P 46296 : C | PRIMER, PERCUSSION, M82 LOADING, ASSEMBLING, AND PACKING |
| MIL-C-50815 Base Document:1971 | CDU-5/B LOADING ASSEMBLING AND PACKING |
| MIL-L-48063 Revision A:1973 | LAUNCHER, ROCKET, LAU 68B/A SHIPPING ASSEMBLY |
| MIL-C-50289 Base Document:1969 | COVER ASSEMBLY, WARHEAD |
| MIL-F-60349 Revision B:1970 | FUSE, POINT DETONATING, M48A3, LOADING, ASSEMBLING AND PACKING |
| MIL-S-48015 Base Document:1972 | STRAP ASSEMBLY |
| MIL-L-45942 Revision A:1976 | LINK, CARTRIDGE, METALLIC BELT, 30MM, XM23 |
| MIL-T-70681 Base Document:1988 | TRIPHENYL BISMUTH |
| MIL-PRF-51191 Revision G:2011 | HEATER, AIR, ELECTRICAL, FILTER UNIT, M3 |
| MIL-DTL-32209 Base Document:2008 | CUTTER, CABLE MLU-63/B |
| DOD-C-70463 Base Document:1984 | CARTRIDGE, 5.56MM: PLASTIC, BALL, PRACTICE, M862 |
| MIL-M-23185 Revision C:1984 | MARKER, LOCATION, SUBMARINE MARK 21 MOD O, MARK 22 MOD O, MARK 23 MOD O AND MARK 24 MOD O |
| MIL-F-48067 Base Document:1972 | FUSE, ROCKET, POINT DETONATING SQ AND DELAY, M440 LOADING, ASSEMBLING AND PACKING |
| MIL-C-51067 Revision B:1983 | CALCIUM MAGNESIUM CARBONATE, TECHNICAL (METRIC) |
| MIL-B-82548 Revision A:1989 | BOMB, GENERAL PURPOSE, MARK 82, 500 POUND, EXPLOSIVE LOADING, ASSEMBLING AND PACKING |
| MIL C 63990 : C | CARTRIDGE, 5.56MM, TRACER, M856 |
| MIL I 82736 : A | IGNITION PELLETS, MAGNESIUM-FLUOROCARBON |
| MIL-D-51091 Revision J:1986 | DECONTAMINATING APPARATUS, POWER DRIVEN, SKID-MOUNTED, MULTIPURPOSE, NONINTEGRAL, 500-GALLON, M12A1 |
| MIL-E-7125 Revision A:1982 | ETHYLENE GLYCOL MONOETHYL ETHER ACETATE, TECHNICAL |
| MIL-F-51364 Base Document:1972 | FIN, ASSEMBLY, BOMB, 750 LB CLUSTER, M14E3 |
| MIL-F-50520 Base Document:1970 | FUZE, PD. M536: DELAY DETONATOR ASSEMBLY FOR LOADING, ASSEMBLING AND PACKING |
| MIL-A-45870 Base Document:1975 | ALIGNMENT DEVICE, CARTRIDGE TO ATOMIC WARHEAD: H4168 |
| MIL-G-13672 Revision D:1968 | GRENADE, HAND, FRAGMENTATION, DELAY, M56 LOADING, ASSEMBLING AND PACKING |
| MIL F 51194 : C | FILTER, PARTICULATE, 20 CFM, M19 |
| MIL-DTL-14824 Revision C:2007 | PROJECTILE 155 MM, HE, METAL PARTS ASSEMBLY, M107 |
| MIL-DTL-45444 Revision C:1996 | HMX (CYCLOTETRAMETHYLENETETRANITRAMINE) |
| MIL-P-20444 Revision C:1974 | PRIMER, PERCUSSION, M42 PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-S-51547 Base Document:1989 | SMOKE POT, HC, M1, COMPONENTS FOR |
| MIL-DTL-70794 Revision A:2006 | PROJECTILE, M940 - 20 MM, MULTIPURPOSE, TRACE SELF-DESTRUCT, METAL PARTS |
| MIL-DTL-32175 Base Document:2004 | FUZE, PIBD - M549A1, LESS SPITBACK ASSEMBLY |
| MIL-DTL-398 Revision D:1996 | RDX (CYCLOTRIMETHYLENETRINITRAMINE) |
| MIL-DTL-32059 Revision B:2003 | INITIATOR, ARM FIRE, JAU-54/A |
| MIL-DTL-63108 Revision C:2015 | Cartridge, Impulse: M796 |
| MIL-D-60448 Base Document:1968 | DETONATOR, ELECTRIC M78, PARTS AND LOADING, ASSEMBLING, AND PACKING |
| MIL-D-50720 Base Document:1971 | DUMMY CARTRIDGE 20 MILLIMETER PLASTIC XM254 |
| DOD C 63980 : 0 | CARTRIDGE, 30MM, TARGET PRACTICE, M788 |
| MIL-C-60808 Revision A:1987 | CARTRIDGE, CALIBER .45 REFERENCE |
| MIL-C-46553 Revision B:1974 | CARTRIDGE, 20MM, TARGET PRACTICE, M99A1 |
| MIL T 14703 : NOTICE 1 | TIMER, INTERVAL DUMMY, XM 10 AND POWER SUPPLY, DUMMY PS406D ASSEMBLY |
| MIL-W-50550 Revision A:1973 | WARHEAD, 2.75 INCH ROCKET, FLECHETTE, WITH FUZE WDU-4A/A, WDU-13/A LOADING, ASSEMBLING AND PACKING |
| MIL-F-45465 Revision F:1973 | FUZE, PD, M524A6 LOADING, ASSEMBLING AND PACKING |
| MIL-W-50915 Base Document:1971 | WARHEAD SECTION, 762MM ROCKET HE M6A1 LOADING ASSEMBLING & PACKING |
| MIL-B-48834 Base Document:1975 | BAROSWITCH SIMULATOR ASSEMBLY |
| MIL-S-20441 Revision C:1974 | SIMULATOR, FLASH ARTILLERY, M110 PARTS, AND LOADING, ASSEMBLING AND PACKING |
| MIL-P-50206 Base Document:1968 | PROPELLANT M9, FLAKE (FOR USE IN 40 MM CARTRIDGES) |
| MIL-C-45096 Revision D:1967 | CARTRIDGE, 90MM, TP-T, M353A1 ASSEMBLING, MARKING AND PACKING |
| MIL-C-60380 Revision A:1972 | CARTRIDGE, 105 MM, SEMI FIXED, SMOKE, WP, M60 LOADING, ASSEMBLING AND PACKING |
| MIL-M-70605 Base Document:1988 | 2,2'-METHYLENEBIS (4-METHYL-6-TERT-BUTYLPHENOL) |
| MIL-F-46470 Revision D:1972 | FUZES, PD, M525 AND M527B1, HEAD ASSEMBLY FOR |
| MIL-P-46565 Revision C:1973 | PRIMERS, PERCUSSION, M28A2 AND M28B2 LOADING, ASSEMBLING AND PACKING |
| MIL-B-23360 Revision B:1970 | BOMB, INCENDIARY, TH3, 4-POUND, M126 |
| MIL-A-45873 Base Document:1975 | ADAPTION KIT, WH, GM. M75 WITH AUXILIARIES PACKAGE 3 OF 4 |
| MIL-DTL-32005 Base Document:1997 | CARTRIDGE, IMPULSE, CCU-143/A |
| MIL-DTL-60982 Revision C Interim Revision:2004 | Case Cartridge, 40 Millimeter - M169 Loading, Assembling, Packing |
| MIL-DTL-85547 Revision C:2013 | Igniter, PVU-3A/E |
| MIL-P-60359 Base Document:1966 | PROPELLANT M6 FOR USE IN CARTRIDGE 90MM, TP-T, M353 |
| MIL-DTL-3060 Revision G:2011 | Boxes, Small Arms Ammunition - M19A1 and M2A2 |
| MIL-P-60422 Base Document:1967 | PROPELLANT M30A1 (M30E1) FOR USE IN CHARGE, PROPELLING, 105MM, XM176, FOR CARTRIDGE, HE, XM548 FOR HOWITZER M101, M102 AND M108 |
| MIL-S-51537 Base Document:1987 | SMOKE POT, FLOATING, SGF2, AN-M7A1; COMPONENTS FOR |
| MIL-D-51559 Base Document:1991 | DECONTAMINATING APPARATUS: PORTABLE, 14 LITER, M13 (PRACTICE) |
| MIL-P-60608 Revision A:1972 | PROJECTILE, 20 MM, TARGET PRACTICE - TRACER M221; METAL PARTS |
| MIL-G-50246 Base Document:1969 | GRENADE, HAND, FRAGMENTATION, M61 METAL PARTS FOR |
| MIL-L-60385 Revision B:1975 | LAUNCHER FOR ROCKET, HE, 66MM, ANTI TANK, M72A1 ASSEMBLY AND PACKING |
| MIL-C-50458 Base Document:1969 | CASE, CARTRIDGE, COMBUSTIBLE, XM157E1, 152MM, PARTS FOR |
| MIL-L-51131 Revision A:1974 | LITHIUM STEARATE |
| MIL-E-70610 Base Document:1986 | EIMITE IGNITER |
| MIL-C-46546 Revision C:1976 | CARTRIDGE, 20MM, DUMMY, M51A2 |
| MIL-C-45474 Revision B:1969 | CHARGE, SPOTTING, FOR WARHEAD, M38 FOR 762MM ROCKET LOADING, ASSEMBLING AND PACKING |
| MIL-P-51474 Revision A:1984 | PROJECTILE, 64 MM, RIOT CONTROL, KE M743 |
| MIL-C-46937 Revision B:1973 | CARTRIDGE, CALIBER .45, BLANK, M9 |
| MIL D 48042 : 0 | DISPENSER AND BOMB, AIRCRAFT: CBU-52/B LOADING, ASSEMBLING AND PACKING |
| MIL-C-63217 Base Document:1980 | COMPOSITION A-3 TYPE 1I(WITH POLYETHYLENE) |
| MIL-PRF-71168 Revision A:2000 | CARTRIDGE, 7.62MM, XM974 TRACER, SHORT RANGE, TRAINING AMMUNITION |
| MIL-S-14992 Revision A:1974 | SAFETY AND ARMING DEVICE, GUIDED MISSILE, M118 LOADING, ASSEMBLING AND PACKING |
| MIL P 46917 : C | PRIMER, PERCUSSION, M34 LOADING, ASSEMBLING AND PACKING |
| MIL-C-1313 Revision F:1971 | CARTRIDGE, CALIBER .30, BALL, M2 |
| MIL-C-60111 Revision C:1976 | CARTRIDGE, 5.56MM, TRACER, M196 |
| MIL-D-48350 Base Document:1974 | DISPENSER CONTROL PANEL FOR M56/XM58, MINES/MARKERS |
| MIL P 20512 : D | PROJECTILE, 155 MM, SMOKE, HC BE, M116A1, LOADING ASSEMBLING AND PACKING |
| MIL-P-46438 Revision A:1970 | PLUG, CLOSING, FOR ARTILLERY AND MORTAR PROJECTILES |
| MIL-R-60995 Revision A:1983 | ROCKET MOTOR, 2.75 INCH ROCKET, MARK 40 & MODS, MARK 4 & MODS LOADING ASSEMBLING & PACKING |
| MIL-B-50539 Revision A:1983 | BOMB DISPENSER, CNU-80/E25 SHIPPING 7 STORAGE CONTAINER FOR |
| MIL D 50416 : 0 | DISPENSER AND BOMB, AIRCRAFT CBU-14 A/A LOADING, ASSEMBLING AND PACKING |
| MIL-C-48114 Base Document:1972 | CHARGE, DEMOLITION, H.E., LINEAR, M58, W/FUZE AND CHARGE, DEMOLITION, INERT, LINEAR, M68, W/INERT FUZE, FOR LVTE7 ASSEMBLING AND PACKING |
| MIL-DTL-70526 Revision B:2009 | Projectile, 105 Millimeter, HE, RA- M913/M927, Delay Assembly for |
| MIL B 38634 : LATEST | BOMB, FIRE, BLU 32A B |
| MIL-DTL-70507 Revision A:2010 | PROJECTILE, 155 MM, HE - M864E2 LOADING, ASSEMBLING AND PACKING |
| MIL-W-14979 Base Document:1968 | WARHEAD, 2.75 INCH ROCKET, XM229, (INERT FILLING OUT), PARTS FOR |
| MIL C 440 : C | COMPOSITION A-3 AND A-4 |
| MIL-PRF-32294 Base Document:2008 | Cap, Blasting, Non-Electric - M7 Cap, Blasting, Practice, Inert, Non-Electric - XM30 |
| MIL-DTL-32129 Revision A:2009 | CATAPULT, AIRCRAFT EJECTION SEAT, CKU-7A/A ASSEMBLY |
| MIL-DTL-82945 Revision B:2010 | CATAPULT, AIRCRAFT EJECTION SEAT, CKU-10/A AND CKU-11/A ASSEMBLIES |
| DEFSTAN 13-98/2(1996) : 1996 | REQUIREMENTS FOR THE PROVISION OF AMMUNITION TECHNICAL DATA |
| MIL-DTL-46992 Revision E:2006 | CUTTER, DELAY, PROPELLANT ACTUATED, M21 (2 SEC) AND M22 (10 SEC) |
| MIL-P-46994 Revision B:1982 | PELLETS/GRANULES BORON/POTASSIUM NITRATE |
| MIL-A-46545 Revision B:1966 | ACTUATOR, EXPLOSIVE, LINEAR, M2 PARTS FOR |
| MIL C 70600 : (5) | CARTRIDGES, CALIBER .22 |
| MIL-I-60084 Revision E:1974 | INITIATOR, BOMB FUZE, FMU-7C/B |
| MIL-C-10244 Revision G:1970 | CRYPTOGRAPHIC EQUIPMENT DESTROYER, INCENDIARY, TH4, M2A1 |
| MIL-O-60371 Revision A:1986 | OXAMIDE EXPLOSIVE COMPOSITION |
| MIL-C-20353 Revision C:1966 | CARTRIDGE,90MM,CANISTER,M336 LOADING, ASSEMBLY AND PACKING |
| MIL-F-50415 Revision A:1973 | FUZE, ROCKET,M412A1 LOADING AND ASSEMBLING |
| MIL-R-60399 Base Document:1966 | REDUCER, FLASH M1 FOR 155MM GUN |
| MIL-S-48209 Base Document:1972 | SEALED RUBBER ROUND SECTION |
| MIL-P-3173 Revision B:1983 | POTASSIUM CARBONATE, TECHNICAL |
| MIL C 46933 : A | CARTRIDGE, 7.62MM, NATO, BLANK M82 |
| MIL-A-14995 Base Document:1968 | ADAPTER-BOOSTER, BOMB, TAIL, XM150, PARTS FOR |
| MIL-P-85767 Base Document:1986 | PROJECTILE, 20 MILLIMETER, TARGET PRACTICE PGU-27/B |
| MIL-P-60417 Base Document:1967 | PROPELLANT M6 FOR USE IN CARTRIDGE, 90MM, APERS, XM580E1 FOR GUNS M36 AND M41 |
| MIL T 60201 : C | THRUSTER, CARTRIDGE ACTUATED, M25A1 ASSEMBLY |
| MIL-T-46626 Revision C:1994 | THRUSTER, CARTRIDGE ACTUATED, M2A2 ASSEMBLY |
| MIL-C-46523 Revision B:1968 | CARTRIDGE, 76MM, AP-T, M339, LOADING, ASSEMBLING AND PACKING |
| MIL-L-60004 Revision A:1966 | LAUNCHER FOR ROCKET, HE, 66MM. ANTI TANK, M72 ASSEMBLY & PACKING |
| MIL-D-13684 Revision D:1969 | Detonator, Electric, M48 Parts for Loading, Assembling and Packing |
| MIL-S-18570 Revision C:1982 | SIGNAL, SMOKE & ILLUMINATION, AIRCRAFT MARK 6 MOD 3 |
| MIL-C-45110 Revision B:1976 | CARTRIDGE, 90MM, AP-T, M318A1 ASSEMBLING, MARKING AND PACKING |
| MIL-A-175 Revision C:1983 | AMMONIUM NITRATE, TECHNICAL (METRIC) |
| MIL-B-50984 Base Document:1971 | BAG, PROPELLING CHARGE M67 EMPTY' |
| MIL F 45144 : D | FUSE, BLASTING, TIME, M700, & FUSE, BLASTING, TIME, INERT, LOADING, ASSEMBLING AND PACKING |
| MIL-PRF-32317 Base Document:2009 | CARTRIDGE, 7.62 MM: ARMOR PIERCING - M993 |
| MIL-C-48072 Base Document:1972 | CAP, WINDSHIELD ASSEMBLY METAL PARTS ASSEMBLY |
| MIL C 46550 : C | CHARGE, DEMOLITION, SHAPED, 40 LB, M3A1 AND M3 PRACTICE METAL PARTS ASSEMBLY |
| MIL-F-50532 Revision A:1976 | FUSE, ROCKET, BASE DETONATING XM434 ASSEMBLING AND PACKING |
| MIL-DTL-17124 Revision F:2012 | CORD, DETONATING AND DUMMY CORD, DETONATING |
| MIL-C-48147 Base Document:1973 | CASTINGS, FERRITIC MALLEABLE IRON FOR M151 WARHEAD |
| MIL-F-60043 Revision A:1968 | FUZE, BASE DETONATING, (M62A2) METAL PARTS FOR |
| MIL-A-12831 Revision D:1973 | ACTIVATOR, M2, PARTS FOR |
| MIL-D-51468 Revision C:1992 | DECONTAMINATION KIT, PERSONAL M258A1 |
| MIL S 0013183 : C | SMOKE POT, HC, 30 POUND, ABC-M5 |
| MIL-P-60814 Base Document:1967 | PROJECTILE, AP-T, 90MM, M318A1 METAL PARTS |
| MIL-D-46205 Revision C:1966 | DELAY OR NON-DELAY ELEMENT, M9 PARTS FOR |
| MIL-I-60008 Revision B:1991 | IGNITER, INTEGRAL M56 |
| MIL-C-51457 Base Document:1979 | CANISTER, CHEMICAL PROJECTILE 8 INCH NM XM28 |
| MIL-P-60351 Base Document:1965 | PRIMER, PERCUSSION, M68 METAL PARTS FOR |
| MIL-Z-50976 Base Document:1971 | ZIRCONIUM SPONGE |
| MIL-C-70785 Base Document:1989 | CARTRIDGE, 25MM, TARGET PRACTICE TRACER (TP-T) M793 REFERENCE |
| MIL-P-48058 Base Document:1972 | PROPELLANT M6 FOR USE IN CARTRIDGE 105MM, HEP-T, M327 |
| MIL-DTL-14852 Revision D:2009 | PROJECTILE, 105 MM, ILLUMINATING, M314A3 AND PROJECTILE, 105 MM, INFRARED ILLUMINATING, M1064 METAL PARTS ASSEMBLY |
| DEFSTAN 13-98/1(1980) : 1980 AMD 5 1990 | AMMUNITION REQUIREMENTS FOR THE PROVISION OF TECHNICAL DATA |
| MIL-C-38973 Base Document:1970 | CARTRIDGE, BOMB EJECTION CCU-10/B |
| MIL-N-48263 Base Document:1974 | 1-NITRO-2-PROPANOL (NPL) |
| MIL-DTL-18714 Revision F:2012 | PRIMER, ELECTRIC, MARK 45 MOD 1 |
| MIL-HDBK-1461 Revision A:1999 | AMMUNITION MANUFACTURERS AND THEIR SYMBOLS |
US$20.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.