MIL-STD-286 Revision C:1991
Current
Current
The latest, up-to-date edition.
PROPELLANTS, SOLID: SAMPLING, EXAMINATION AND TESTING
Available format(s)
PDF
Publisher
Alphabetical Index of Test Methods
Numerical Index of Test Methods
1. Scope
2. Applicable Documents
3. Definitions
4. General Requirements
5. Detail Requirements
6. Notes
Test Methods
Specifies the general methods of sampling, examining, and testing solid propellants.
| Committee |
FSC 1376
|
| DocumentType |
Standard
|
| Pages |
489
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| MIL-P-60169 Revision B:1970 | PAPER, SEALING |
| MIL-P-46993 Base Document:1963 | PROPELLANT M26 (T28) FOR USE IN INCREMENT XM90E1 FOR 81MM MORTAR |
| MIL-P-46663 Base Document:1962 | PROPELLANT, M2, FOR CARTRIDGE, 37MM, TP, M63 Mod. 1 |
| DOD-D-64015 Revision A:1986 | Diethylene Glycol Dinitrate (DEGDN) (for use in Ammunition) |
| MIL-P-60989 Revision A:1976 | PROPELLANT, M2 FOR M5 SUBSYSTEM AMMUNITION |
| MIL-P-23929 Revision A:1964 | PROPELLANT, H8 |
| MIL-P-60432 Revision C:1980 | PROPELLANT POWDER FOR USE IN BASE GRAIN, AHH |
| MIL-HDBK-762 Base Document:1990 | Design of Aerodynamically Stabilized Free Rockets |
| MIL-P-14737 Base Document:1968 | PROPELLANT, M7 |
| MIL P 003984 : H | PROPELLANTS FOR SMALL ARMS AMMUNITION |
| MIL P 60318 : B | PROPELLANT, M1 FOR USE IN CHARGE, PROPELLING M67 FOR 105 MM, HOWITZER |
| MIL-P-70533 Base Document:1990 | PROJECTILE, 105 MM, HE, RA XM913/XM927 ROCKET PROPELLANT FOR |
| MIL-DTL-450 Revision D:2011 | COATING COMPOUND, BITUMINOUS SOLVENT TYPE, BLACK (FOR AMMUNITION) |
| MIL-DTL-32074 Base Document:2000 | EXPLOSIVE, PLASTIC-BONDED, CAST AFX-757 |
| MIL-P-63138 Base Document:1977 | PROJECTILE, 8-INCH, HE, RA, M650 PROPELLANT GRAIN FOR |
| MIL C 82604 : 0 | COMPOUND, ASPHALTIC, HIGH MELTING HOT-MELT (CAVITY LINING) |
| MIL-C-71155 Base Document:1993 | CARTRIDGE, IGNITION, M987 LOADING, ASSEMBLING AND PACKING |
| MIL-P-70456 Revision C:1989 | PROPELLANT, STICK, M31A1E1 FOR USE IN CHARGE PROPELLING M203A1 |
| MIL-A-60091 Revision B:1988 | ADHESIVE FOR BONDING DEMOLITION CHARGES TO STRUCTURAL SURFACES |
| MIL-P-70668 Base Document:1987 | PRESSURE CARTRIDGE ASSEMBLY LOADING, ASSEMBLING AND PACKING |
| MIL-P-50573 Revision C:1979 | PROJECTILE, 155MM, HE, ROCKET ASSISTED M549 & M549A1 FORWARD (AHH) PROPELLANT GRAIN FOR |
| MIL-P-53028 Base Document:1983 | PROPELLANT, ROCKET MOTOR, ROCKET, HIGH EXPLOSIVE, 345 MILLIMETER, XM 130 |
| MIL-P-60029 Revision B:1973 | PROPELLANT, M9 FOR USE IN INCREMENTS M90 AND M90A1 FOR 81MM MORTAR |
| MIL-P-70762 Base Document:1990 | PROPELLANT, COMPOSITE, CAST FOR USE IN SIMULATOR, MISSILE: SAGGER XM27 |
| MIL-P-48749 Revision D:1986 | PROJECTILE, 155MM, HE: M483A1 LOADING, ASSEMBLING AND PACKING |
| MIL-N-00494 Revision B:1984 | |
| MIL P 19264 : B | PROPELLANT, BS-NACO, FOR THE 5"/54 CALIBER PROPELLING CHARGE |
| DOD-P-82671 Base Document:1979 | PROPYLENE GLYCOL DINITRATE |
| MIL P 46402 : C | PRIMER, ELECTRIC, M83, LOADING, ASSEMBLING AND PACKING |
| MIL-C-48023 Base Document:1973 | CARTRIDGE, 107MM, HE: M453 LOADING, ASSEMBLING AND PACKING |
| MIL-S-1399 Revision E:1984 | SIGNAL, ILLUMINATION, AIRCRAFT TRACER DOUBLE STAR AN-M53A2 THROUGH AN-M58M2 PARTS, AND LOADING, ASSEMBLING AND PACKING |
| MIL-C-70501 Base Document:1984 | CHARGE, PROPELLING, M204, PAPER PREFORM PROCESS PARTS AND CONTAINER ASSEMBLY |
| MIL-G-48165 Base Document:1973 | GRENADE, G.P. M43A1 AND BOMB, BLU-18 CONTAINER ASSEMBLY FOR |
| MIL-C-48286 Revision A:1975 | CARTRIDGE, MINE EJECTION ASSEMBLY. M198 |
| MIL-M-20484 Revision C:1969 | MOTOR, ROCKET, M4 LOADING, ASSEMBLING, MARKING AND PACKING |
| MIL-B-48387 Base Document:1975 | BALL POWDER, IGNITER (BP1) (FOR USE IN CHARGES, PROPELLING FOR ARTILLERY SYSTEMS) |
| MIL-P-60416 Revision A:1982 | PROPELLANT MI FOR USE IN CHARGE, PROPELLING 155MM, M3A1 |
| DOD-C-70514 Base Document:1985 | Cartridge, 120MM, Super Slug, Load, Assemble, and Pack |
| MIL-DTL-82646 Revision B:2008 | PLASTIC FILM, CONDUCT1VE. HEAT-SEALABLE. FLEXIBLE |
| MIL-P-48357 Revision A:1977 | PROPELLANT, DOUBLE BASE SHEET, M36 |
| MIL-P-60356 Revision A:1971 | POWDER, IGNITER CLEAN BURNING (FOR USE IN CHARGES, PROPELLING, M3A1, M4A2, AND XM119E4 FOR 155MM, HOWITZER) |
| MIL-I-17563 Revision C:1992 | IMPREGNANTS FOR ALUMINUM, COPPER, IRON, MAGNESIUM AND ZINC ALLOY CASTINGS |
| MIL P 3984 : J | PROPELLANT FOR SMALL ARMS AMMUNITION |
| MIL P 45460 : A | PROPELLANT, T2 |
| MIL-P-46426 Revision A:1965 | PROPELLANT, M5, FOR USE IN AND CARTRIDGE, 90MM, HEAT, M371 AND M371E1 |
| MIL-M-60923 Revision A:1970 | MINE, APERS, M26 LOADING, ASSEMBLING AND PACKING |
| MIL-M-70765 Base Document:1988 | MINE ANTI PERSONNEL, M86, SPECIAL TEST MINE LOADING AND ASSEMBLY OF |
| MIL-DTL-32260 Revision A:2014 | Primer, Percussion - M28A2, M28B2, XM133 and XM134 Assembly |
| MIL C 20354 : C | CARTRIDGE, 105 MM, ILLUMINATING, M314A3, LOADING, ASSEMBLING AND PACKAGING |
| MIL-C-48061 Base Document:1973 | CELLULOSE NITRATE, PLASTIC SHEETS |
| MIL-S-45428 Revision D:1969 | SQUIB, ELECTRIC, M2, PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-P-50257 Base Document:1969 | PROJECTILE 8 INCH, HE, M404 LOADING, ASSEMBLING AND PACKING. |
| MIL P 48249 : A | PROJECTILE 155MM ILLUMINATING M485A2 ACCESSORIES FOR, AND ASSEMBLING AND PACKING |
| DOD-M-64040 Revision A:1986 | METHYL DIPHENYLUREA |
| MIL-O-82672 Revision A:1986 | |
| MIL-S-70547 Base Document:1986 | SPHEROIDAL PROPELLANT, M38 FOR USE IN PROPELLING CHARGES M218, M219 AND M220 FOR CARTRIDGES, 81 MM, SMOKE, M819, ILLUMINATING M853 AND PRACTICE, M879 |
| MIL-B-50432 Base Document:1969 | BAG, BARRIER, NEOPRENE, FOR USE WITH 152MM CARTRIDGES |
| MIL-S-50482 Revision A:1971 | SIGNAL, ILLUMINATION, GROUND, YELLOW, XM191, GREEN, XM192 AND RED, XM193 PARTS FOR AND LOADING, ASSEMBLING PACKING |
| MIL-B-85735 Base Document:1985 | BALLISTIC MODIFIER LC-12-15 |
| MIL-S-48142 Base Document:1973 | SIGNAL, ILLUMINATION, GROUND, XM199 RED, XM201 WHITE, XM200 GREEN AND XM198 AMBER PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-S-48377 Base Document:1974 | SIGNAL, SMOKE, GROUND XM202 THRU XM205 RED, YELLOW, GREEN AND WHITE PARTS FOR AND LOADING ASSEMBLING AND PACKING |
| MIL-F-70676 Base Document:1988 | Ferric Acetylacetonate |
| MIL-T-301 Revision A:1961 | TRIACETIN (GLYCERYL TRIACETATE) |
| MIL-O-45445 Revision B:1976 | |
| MIL-P-63201 Base Document:1983 | PROPELLANT, SOLVENTLESS, TYPE M37 FOR PROJECTILE, 155MM, HE, ROCKET ASSISTED, M549 AND M549A1 |
| MIL-P-323 Revision A:1959 | PROPELLANT, M2 AND M5 |
| MIL-P-22332 Revision B:1972 | PAINT, PRIMING, EXTERIOR AND INTERIOR (FOR AMMUNITION) |
| MIL-P-48335 Base Document:1975 | PROPELLANT, SPHEROIDAL BALL POWDER |
| MIL-E-82756 Base Document:1994 | EXPLOSIVE, PLASTIC BONDED, CAST PBXN-103 |
| MIL-P-12764 Revision G:1981 | PROJECTILE, 4.2 INCH, ILLUMINATING, M335A2 LOADING, ASSEMBLING AND PACKING |
| MIL P 223 : B | POWDER, BLACK |
| MIL-B-50873 Revision A:1971 | BAG, BARRIER, ELASTOMERIC |
| MIL-C-70544 Revision A:1988 | CARTRIDGE, 81MM, ILLUMINATING, M853A1, LOADING, ASSEMBLING AND PACKING |
| MIL-S-1398 Revision E:1984 | SIGNAL, ILLUMINATION, AIRCRAFT DOUBLE STAR AN-M37A2 THROUGH AN-M42A2 PARTS AND LOADING, ASSEMBLING AND PACKING |
| MIL-C-70810 Base Document:1991 | Combustible Cartridge Case Assembly Parts Nitrocellulose Paper Process, for Charge, Propelling, 155MM, M203A1 |
| MIL-P-70475 Base Document:1984 | PAPER, NITROCELLULOSE BASE |
| MIL-P-48091 Revision G:1988 | PROJECTILE, 8 INCH: HE: M509A1 LOADING, ASSEMBLING & PACKING |
| MIL-M-48183 Revision B:1992 | Munition for Projectile, 155MM, M692/M731, Delay Detonator for |
| MIL-R-50753 Revision A:1972 | ROCKET MOTOR M199 ASSEMBLY |
| MIL-C-48156 Base Document:1974 | CARTRIDGE, IGNITION, M299 LOADING, ASSEMBLING AND PACKING |
| MIL-C-50912 Base Document:1971 | CARTRIDGE, 152MM, CANISTER, M625A1 LOADING, ASSEMBLING AND PACKING |
| MIL-PRF-32293 Base Document:2008 | Cap, Blasting, Electric - M6 |
| MIL-P-63517 Base Document:1983 | PROPELLANT M14 FOR USE IN CARTRIDGE, 105MM, TP-T, M490E1 |
| MIL-N-246 Revision B:1962 | NITROGLYCERIN |
| MIL-P-63311 Base Document:1979 | PRIMER, ELECTRIC, M83, LOADING, ASSEMBLING AND PACKING |
| MIL D 48561 : A | |
| MIL-A-70604 Base Document:1988 | AMINE BONDING AGENT |
| MIL-PRF-32056 Base Document:1999 | CARTRIDGE, 10 GAUGE SHOTSHELL, BLANK |
| MIL-PRF-82736 Revision A:1988 | IGNITION PELLETS, MAGNESIUM-FLUOROCARBON |
| MIL-P-48333 Base Document:1974 | PROPELLANT, LIQUID |
| MIL-DTL-19264 Revision D:2016 | PROPELLANT, BS-NACO, FOR PROPELLING CHARGES FOR NAVY 5-INCH GUNS |
| MIL-C-71034 Base Document:1992 | CHARGE, PROPELLING, M230 PARTS & CONTAINER ASSEMBLY |
| NASA MSFC SPEC 3635 : 2012 | PYROTECHNIC SYSTEM SPECIFICATION |
| MIL-P-63515 Revision A:1982 | PROPELLANT M30 FOR USE IN CARTRIDGE 105 MM, APFSDS-T, M833 |
| MIL-DTL-82965 Revision B:2001 | PROPELLANT, GUN, HIGH ENERGY NITRAMINE |
| MIL-P-70735 Base Document:1991 | PAPER, NITROCELLULOSE BASE FOR ARTILLERY PROPELLING CHARGES |
| MIL-P-70956 Revision B:1994 | Propellant, M14, For Use in Cartridge 120 MM, TPCSDS-T, M865 |
| MIL-DTL-10058 Revision J:2010 | SIMULATOR, PROJECTILE, GROUND BURST - M115A2 |
| MIL-P-60463 Revision B:1974 | PROPELLANT POWDER (FOR USE IN BASE GRAIN OGK) |
| MIL-A-85097-12 Base Document:1984 | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS); ROCKET CATAPULT MARK 18 MOD 0 (LOADED ASSEMBLY) |
| MIL-B-45451 Revision B:1961 | BENITE STRANDS |
| MIL-P-270 Revision A:1959 | PROPELLANT ARTILLERY |
| MIL-DTL-82962 Revision J:2011 | CARTRIDGES, IMPULSE, CCU-136/A, CCU-138/A, AND CCU-136A/A |
| MIL-C-70461 Revision D:1991 | Combustible Cartridge Case Assembly Parts for Charge, Propelling, 155MM, M203A1 |
| MIL-F-63463 Base Document:1979 | FILM, INHIBITING, ETHYL, CELLULOSE |
| MIL-C-70714 Base Document:1987 | CARTRIDGE, 60MM, ILLUMINATING, M721 LOADING, ASSEMBLING AND PACKAGING |
| MIL-C-48352 Base Document:1975 | CHARGE, SPOTTING, MODEL APG-2 |
| MIL-I-14961 Base Document:1969 | INCREMENT, PROPELLANT M1A1, M2A1, M3A1, M181,AND M182 (MADE FROM PROPELLANT M8) |
| MIL P 82646 : A | PLASTIC FILM, CONDUCTIVE, HEAT-SEALABLE, FLEXIBLE |
| MIL-I-50412 Base Document:1970 | INITIATOR ASSEMBLY FOR PRIMER, ELECTRIC, XM91E1 AND XM117, PARTS FOR |
| MIL-M-46263 Base Document:1960 | MAX-2 EXPLOSIVE |
| MIL E 81111 : B | EXPLOSIVE, PLASTIC BONDED MOLDING POWDER (PBXN-5) |
| MIL-I-48145 Base Document:1973 | IGNITER TUBE |
| MIL C 450 : C | COATING COMPOUND, BITUMINOUS SOLVENT TYPE, BLACK (FOR AMMUNITION) |
| MIL-P-85662 Base Document:1985 | PROPELLANT, BALL, 25 MM, ARMOR PIERCING INCENDIARY (API) PGU-20/U |
| MIL-S-48251 Base Document:1973 | SIGNALS, ILLUMINATION, AIRCRAFT DOUBLE-STAR AN-M37A2 THROUGH AN-M42A2 (ALTERNATIVE CASE) PARTS, AND LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-10057 Revision J:2010 | SIMULATOR, HAND GRENADE - M116A1 |
| MIL-A-23894 Base Document:1963 | ALPHA-NITRONAPHTHALENE (FOR USE IN EXPLOSIVES) |
| MIL-D-13796 Revision A:1962 | DI-2 ETHYLHEXYLPHTHALATE |
| MIL-F-20363 Revision B:1968 | FLARE, AIRCRAFT, PARACHUTE, M8A1 PARTS FOR, AND LOADING, ASSEMBLING AND PACKING |
| MIL-DTL-32124 Revision A:2006 | PROPELLANT, NSWC/IH-BC-15, NSWC/IH-BC-16, NSWC/IH-BC-17, NSWC/IH-BC-20, NSWC/IH-BC-21 AND NSWC/IH-BC-22 |
| MIL-M-63457 Revision A:1987 | MINE, ANTITANK, HE, BLU-91/B LOADING, ASSEMBLING AND PACKING |
| MIL-P-81994 Base Document:1975 | PROPELLANT FOR 20 MM, AMMUNITION |
| MIL-A-85097-9 Revision A:1984 | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS); ROCKET CATAPULT MARK 12 MOD 1 (LOADED ASSEMBLY) |
| MIL-C-48397 Revision A:1986 | CARTRIDGE, IGNITION, M752A1 LOADING, ASSEMBLING & PACKING |
| MIL-P-60398 Revision B:1988 | Propellant M9, Flake (for use in Ignition Cartridges) |
| MIL-P-46522 Base Document:1961 | PROPELLANT, M17, FOR USE IN CARTRIDGES, 76MM, AP-T, M339 7 76MM, TP-T, M340A1 |
| MIL C 70549 : 0 | CARTRIDGE, 81MM, SMOKE, RED PHOSPHORUS M819, WITH FUZE MTSQ M772 LOADING ASSEMBLING AND PACKING |
| MIL-C-71133 Base Document:1992 | CARTRIDGE, IGNITION, M985 LOADING, ASSEMBLING & PACKING |
| MIL-PRF-70600 Revision B:2012 | Cartridge, Rimfire, .22 Caliber |
| MIL-I-13857 Revision B:1983 | IMPREGNATION OF METAL CASTING |
| MIL-M-70691 Base Document:1988 | 4,4 - METHYLENEBIS (2,6-DITERTBUTYLPHENOL) |
| MIL P 85548 : B | PROPELLANT, COMPOSITE, CAST, N-60 |
| MIL-P-82944 Base Document:1995 | PROPELLANT, SOLID, COMPOSITE |
| MIL-DTL-32040 Base Document:1999 | PROPELLANT, GUN, HIGH ENERGY NITRAMINE |
| MIL-DTL-82604 Revision A:2010 | Compound, Asphaltic, High Melting Hotmelt (Cavity Lining) |
| MIL C 64003 : A | CHARGE ASSEMBLY, EXPULSION FOR PROJECTILE, 15MM, SMOKE, M825 |
| MIL-DTL-3301 Revision D:2008 | COMPOUND, ASPHALTIC, HOT-MELT (CAVITY LINING) |
| DOD P 63986 : 0 | PELLET, FLASH TUBE, 1B52 |
| MIL-P-70819 Base Document:1991 | PRIMER, ELECTRIC, M128 LOADING, ASSEMBLING AND PACKING |
| MIL-B-23297 Revision B:1980 | BOOSTER, GUIDED MISSILE, MARK 12 MOD 1 (LOADED ASSEMBLY) |
| MIL-PRF-48656 Revision B:1999 | Cartridges, Shotshell |
| MIL-S-10522 Revision K:1975 | SIMULATOR, BOOBY TRAP WHISTLING M 119 PARTS FOR AND LOADING ASSEMBLING AND PACKING |
| MIL-P-14999 Base Document:1969 | POWDER, MOLDING COMPOUND EXPLOSIVE (PBX) |
| MIL-P-70505 Base Document:1984 | PROJECTILE, 155mm: XM864 PROPELLANT GRAIN |
| MIL-DTL-32298 Revision A:2016 | CASTING POWDER, PROPELLANT |
| MIL-C-13609 Revision B:1974 | Casting Solvents for 010, OGK and AHH Propellants |
| MIL-P-48870 Base Document:1976 | PROJECTILE, 155MM, TEST. M692 LOADING, ASSEMBLING AND PACKING |
| MIL-P-50538 Base Document:1970 | PROJECTILE 155MM HE M449A1 LOADING, ASSEMBLING AND PACKING |
| MIL-C-48740 Base Document:1975 | CANISTER, MINE PRACTICE, M56 SUBSYSTEM |
| MIL-P-82887 Base Document:1993 | PROPELLANT, M6+2 FOR THE 76 MM/62 CALIBER CARTRIDGE |
| MIL-L-50429 Revision A:1972 | Laminate, Acetal and Cloth, (for Use with 81mm Ammunition) |
| MIL-A-50926 Revision A:1975 | ADHESIVE MR-23 (FOR USE IN AMMUNITION) |
| MIL I 82736 : A | IGNITION PELLETS, MAGNESIUM-FLUOROCARBON |
| MIL-T-46555 Revision B:1965 | TRACER, XM10, PARTS FOR, AND LOADING, ASSEMBLING, AND PACKING |
| MIL-M-70605 Base Document:1988 | 2,2'-METHYLENEBIS (4-METHYL-6-TERT-BUTYLPHENOL) |
| MIL-P-50206 Base Document:1968 | PROPELLANT M9, FLAKE (FOR USE IN 40 MM CARTRIDGES) |
| MIL DTL 85548 : C | PROPELLANT, CAST COMPOSITE, N-60 |
| MIL-P-48764 Revision A:1979 | PROJECTILE, 155MM, HE, ROCKET ASSISTED, M549 AND M549A1, AFT (AHH) PROPELLANT GRAIN FOR |
| MIL-N-3399 Revision B:1962 | |
| MIL-C-50458 Base Document:1969 | CASE, CARTRIDGE, COMBUSTIBLE, XM157E1, 152MM, PARTS FOR |
| MIL-E-70610 Base Document:1986 | EIMITE IGNITER |
| MIL-PRF-71168 Revision A:2000 | CARTRIDGE, 7.62MM, XM974 TRACER, SHORT RANGE, TRAINING AMMUNITION |
| MIL-D-63417 Base Document:1981 | DEVICE, RETENTION, FOR CHARGE, PROPELLING 155MM, XM211 |
| MIL-L-46496 Base Document:1961 | LEAD MONONITRORESORCINATE (LMNR) |
| MIL-DTL-70507 Revision A:2010 | PROJECTILE, 155 MM, HE - M864E2 LOADING, ASSEMBLING AND PACKING |
| MIL-S-10521 Revision K:1983 | SIMULATOR, BOOBY TRAP, FLASH, M117 PARTS FOR AND LOADING ASSEMBLING AND PACKING |
| MIL-B-22450 Revision C:1980 | BOOSTER, GUIDED MISSILE, MARK 12 MOD 0 (LOADED ASSEMBLY) |
| MIL-PRF-32294 Base Document:2008 | Cap, Blasting, Non-Electric - M7 Cap, Blasting, Practice, Inert, Non-Electric - XM30 |
| MIL-P-46994 Revision B:1982 | PELLETS/GRANULES BORON/POTASSIUM NITRATE |
| MIL-I-48252 Revision A:1977 | IGNITER TUBES |
| MIL-P-63066 Base Document:1976 | PROJECTILE, 155MM, SPECIAL TEST, FOR M692 AND M731 LOADING, ASSEMBLING AND PACKING OF |
| MIL N 244 : A | |
| MIL-PRF-32317 Base Document:2009 | CARTRIDGE, 7.62 MM: ARMOR PIERCING - M993 |
| MIL-S-10555 Revision H:1975 | SIMULATOR, BOOBY TRAP ILLUMINATING M 118 PARTS FOR, AND LOADING ASSEMBLING AND PACKING |
| ASTM E 380 : 1993 | Standard Practice for Use of the Internation System of Units (SI) (the Modernized Metric System) (Withdrawn 1997) |
| MIL N 244 : A | |
| MS36548 Revision A:1991 | BOTTLE SOLUTION |
| MIL-A-2550 Revision B:1973 | AMMUNITION, GENERAL SPECIFICATION FOR |
| MIL-D-218 Revision B:1981 | DIBUTYL PHTHALATE, TECHNICAL (METRIC) |
| ASTM E 438 : 1992 | SPECIFICATION FOR GLASSES IN LABORATORY APPARATUS |
| MIL-N-3399 Revision B:1962 | |
| MIL-STD-45662 Revision A:1988 | CALIBRATION SYSTEMS REQUIREMENTS |
| JAN-A-465 Base Document:1947 | Acid, Acetic (for Ordnance use) |
| MIL-N-494 Revision A:1968 | |
| MIL-N-246 Revision B:1962 | NITROGLYCERIN |
| MIL-E-463 Revision B:1962 | ETHYL ALCOHOL [FOR ORDNANCE USE] |
| MIL-STD-12 Revision D:1981 | ABBREVIATIONS FOR USE ON DRAWINGS, SPECIFICATIONS FOR STANDARDS AND IN TECHNICAL DOCUMENTS |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| MIL-D-204 Revision A:1962 | DINITROTOLUENE FOR USE IN EXPLOSIVES |
| MIL-STD-962 Revision D:2003 | DEFENSE STANDARDS FORMAT AND CONTENT |
| ASTM D 2015 : 1996 | Standard Test Method for Gross Caloric Value of Coal and Coke by the Adiabatic Bomb Calorimeter |
| ASTM E 203 : 2016 : REDLINE | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| L-T-790 Revision B:1976 | TUBE, NONMETALLIC; POLYVINYL CHLORIDE (PVC), FLEXIBLE (FOR LABORATORY AND MEDICAL USE) |
US$20.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.