NEMA MG 1 : 2016

Current

Current The latest, up-to-date edition.

Add to Watchlist What is StandardsWatch?

This Standard has been added successfully to your Watchlist.
Please visit My Watchlist to see all standards that you are watching.

You need to be logged in to add this standard to your Watchlist.
Please log in now or create an account to add.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You have already added this standard to your Watchlist.
Visit My Watchlist to view the full list.

MOTORS AND GENERATORS

Publisher: National Electrical Manufacturers Association

Published: 11-23-2012

Available Formats:
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
            Part 1 - REFERENCED STANDARDS AND DEFINITIONS
Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
            Part 2 - TERMINAL MARKINGS
Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
            Part 3 - HIGH-POTENTIAL TESTS
Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
            Part 4 - DIMENSIONS, TOLERANCES, AND MOUNTING
Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
            Part 5 - ROTATING ELECTRICAL MACHINES -
            CLASSIFICATION OF DEGREES OF PROTECTION
            PROVIDED BY ENCLOSURES FOR ROTATING MACHINES
Section I - GENERAL STANDARDS APPLICABLE TO ALL MACHINES
            Part 6 - ROTATING ELECTRICAL MOTORS - METHODS
            OF COOLING (IC CODE)
Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
            Part 7 - MECHANICAL VIBRATION-MEASUREMENT,
            EVALUATION AND LIMITS
Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
            Part 9 - ROTATING ELECTRICAL MOTORS - SOUND
            POWER LIMITS AND MEASUREMENT PROCEDURES
Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
             MACHINES Part 10 - AC SMALL AND MEDIUM MOTORS
Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
             MACHINES Part 10 - DC SMALL AND MEDIUM MOTORS
Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
             MACHINES Part 12 - TESTS AND PERFORMANCE - AC
             AND DC MOTORS
Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
             MACHINES Part 12 - TESTS AND PERFORMANCE - AC
             MOTORS
Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
             MACHINES Part 12 - TESTS AND PERFORMANCE - DC
             SMALL AND MEDIUM MOTORS
Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
             MACHINES Part 13 - FRAME ASSIGNMENTS FOR
             ALTERNATING CURRENT INTEGRAL HORSEPOWER
             INDUCTION MOTORS
SECTION II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL
             MACHINES) Part 14 - APPLICATION DATA - AC AND
             DC SMALL AND MEDIUM MACHINES
SECTION II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
             MACHINES Part 14 - APPLICATION DATA - AC SMALL
             AND MEDIUM MOTORS
Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
             MACHINES Part 14 - APPLICATION DATA - DC SMALL
             AND MEDIUM MOTORS
Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
             MACHINES Part 15 - DC Generators
Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
             MACHINES Part 18 - DEFINITE PURPOSE MACHINES
Section III - LARGE MACHINES Part 20 - LARGE MACHINES
              - INDUCTION MACHINES
Section III - LARGE MACHINES Part 21 - LARGE MACHINES
              - SYNCHRONOUS MOTORS
Section III - LARGE MACHINES Part 23 - LARGE MACHINES
              - DC MOTORS LARGER THAN 1.25 HORSEPOWER
              PER RPM, OPEN TYPE
Section III - LARGE MACHINES Part 24 - LARGE MACHINES
              - DC GENERATORS LARGER THAN 1.0 KILOWATT
              PER RPM, OPEN TYPE CLASSIFICATION
Section IV - PERFORMANCE STANDARDS APPLYING TO ALL
             MACHINES Part 30 - APPLICATION CONSIDERATIONS
             FOR CONSTANT SPEED MOTORS USED ON A SINUSOIDAL
             BUS WITH HARMONIC CONTENT AND GENERAL PURPOSE
             MOTORS USED WITH ADJUSTABLE-VOLTAGE OR
             ADJUSTABLE-FREQUENCY CONTROLS OR BOTH
Section IV - PERFORMANCE STANDARDS APPLYING TO ALL MACHINES
             Part 31 - DEFINITE-PURPOSE INVERTER-FED POLYPHASE
             MOTORS
Section IV - PERFORMANCE STANDARDS APPLYING TO ALL MACHINES
             Part 32 - SYNCHRONOUS GENERATORS (EXCLUSIVE OF
             GENERATORS COVERED BY ANSI STANDARDS C50.12,
             C50.13, C50.14, AND C50.15 ABOVE 5000 kVA) RATINGS
Section IV - PERFORMANCE STANDARDS APPLYING TO ALL MACHINES
             Part 33 - DEFINITE PURPOSE SYNCHRONOUS GENERATORS
             FOR GENERATING SET APPLICATIONS

Abstract - (Show below) - (Hide below)

Includes practical information concerning performance, safety, testing, and construction and manufacture of ac and dc motors and generators.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	National Electrical Manufacturers Association
Pages
ISBN
Supersedes	NEMA MG 13 : 84(R1990)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
BS 2048-1(1961) : 1961	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

CSA C282 : 2015	EMERGENCY ELECTRICAL POWER SUPPLY FOR BUILDINGS
08/30183108 DC : DRAFT MAY 2008	BS IEC/TS 60034-31 - ROTATING ELECTRICAL MACHINES - PART 31: GUIDE FOR THE SELECTION AND APPLICATION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE-SPEED APPLICATIONS
IEEE DRAFT 114 : D1.2 98	DRAFT STANDARD TEST PROCEDURE FOR SINGLE-PHASE INDUCTION MOTORS
CSA C747 : 2009 : INC : UPD 1 : 2016 : R201400	ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS
ASME B73.2 : 2016	Specification for Vertical In-Line Centrifugal Pumps for Chemical Process
GGG L 795 : E	LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING
MIL PRF 23798 : D	AIR CONDITIONER, FAN-COIL ASSEMBLY
IEEE DRAFT 115 : D5 APR 95	TEST PROCEDURE FOR SYNCHRONOUS MACHINES
IEEE DRAFT 67 : D5 2005	GUIDE FOR THE OPERATION AND MAINTENANCE OF TURBINE GENERATORS
A A 59393 : 0	MILLING MACHINE, VERTICAL MULTISPINDLE, DOUBLE COLUMN, COMPUTER NUMERICAL CONTROL (CNC)
ASME BTH 1 : 2017	DESIGN OF BELOW-THE-HOOK LIFTING DEVICES
A A 59460 : 0	PLATING UNIT, SELECTIVE (BRUSH), PORTABLE
BS EN 60034-30 : 2009	ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE-CODE)
CSA C22.2 No. 100 : 2014	MOTORS AND GENERATORS
IEEE 399 : 1997	INDUSTRIAL AND COMMERCIAL POWER SYSTEMS ANALYSIS
IEEE C62.22 : 2009	GUIDE FOR THE APPLICATION OF METAL-OXIDE SURGE ARRESTERS FOR ALTERNATING-CURRENT SYSTEMS
IEEE C37.16 : 2009	PREFERRED RATINGS, RELATED REQUIREMENTS, AND APPLICATION RECOMMENDATIONS FOR LOW-VOLTAGE AC (635 V AND BELOW) AND DC (3200 V AND BELOW) POWER CIRCUIT BREAKERS
IEEE 113 : 1985	DC MACHINES, GUIDE ON TEST PROCEDURES FOR
MIL H 4607 : E	HEATER, ENGINE AND SHELTER, GROUND
OO S 236 : E	SAW, CIRCULAR, TABLE TYPE, WOODWORKING, SINGLE TILTING ARBOR, FLOOR MOUNTED
MIL PRF 43001 : G	WASHER-EXTRACTORS, LAUNDRY, COMMERCIAL
F S 2911 : 0	STOKERS, MECHANICAL - FOR PACKAGED BOILERS FIRED ON COAL OR A COMBINATION OF COAL-GAS, COAL-OIL, OR COAL-GAS-OIL (2,000 TO 50,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
GGG S 58 : F	SAW, RADIAL OVERARM, WOODWORKING
MIL L 80007 : E	LATHES, TOOLROOM, 11-INCH THROUGH 13-INCH
CEI EN 60034-30-1 : 2015	ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
IEEE DRAFT 841 : MARCH 2000	DRAFT STANDARD FOR PETROLEUM AND CHEMICAL INDUSTRY - SEVERE DUTY TOTALLY ENCLOSED FAN-COOLED (TEFC) SQUIRREL CAGE INDUCTION MOTORS - UP TO AND INCLUDING 370 KV (500HP)
ASME HST 4 : 1999	PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS
ASME OM : 2017	OPERATION AND MAINTENANCE OF NUCLEAR POWER PLANTS
API 687 : 2001 : R2009	ROTOR REPAIR
A A 59472 : 0	TUMBLER, DRYING, LAUNDRY (NAVAL SUBMARINE)
IEEE DRAFT C37.06 : D6 2004	AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
IEEE C62.21 : 2003	GUIDE FOR THE APPLICATION OF SURGE VOLTAGE PROTECTIVE EQUIPMENT ON AC ROTATING MACHINERY 1000 V AND GREATER
MIL C 13962 : B	CRUSHING, SCREENING, AND WASHING PLANTS, DIESEL-ENGINE AND ELECTRIC-MOTOR DRIVEN, 225-TONS PER HOUR
ASME HST 4M : 1991	PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS
IEEE C37.06 : 2009	AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES FOR VOLTAGES ABOVE 1000 V
ASTM F 2646 : 2016 : REDLINE	Standard Specification for Bread Slicing Machines
OO P 2895 : 0	PLANT, AGGREGATE, SECONDARY, WITH CONE CRUSHER, MOBILE, 75 TON PER HOUR CAPACITY
MIL B 17095 : H	BOILERS, STEAM, WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
F B 2902 : 0	BOILERS, STEAM WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
MIL B 26994 : E	BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE
AMCA 208 : 2018	CALCULATION OF THE FAN ENERGY INDEX
MIL M 80016 : C	MILLING MACHINE, VERTICAL, SWIVEL HEAD, KNEE AND COLUMN, RAM AND TURRET TYPE
CEI EN 60034-30 : 2011	ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE CODE)
IEEE 1290 : 2015	GUIDE FOR MOTOR-OPERATED VALVE (MOV) MOTOR APPLICATION, PROTECTION, CONTROL, AND TESTING IN NUCLEAR POWER-GENERATING STATIONS
MIL W 80119 : B	WELDING SYSTEMS, ELECTRON BEAM, VACUUM TYPE, COMPUTER NUMERICALLY CONTROLLED (CNC)
12/30243450 DC : DRAFT FEB 2012	BS ISO 20958-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - ELECTRICAL SIGNATURE ANALYSIS - PART 1: THREE-PHASE INDUCTION MOTORS
MIL S 4880 : G NOTICE 1	SWEEPER, MAGNET, SELF-PROPELLED
ASME HST 4 : 1999 : R2010	PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS
IEEE DRAFT 334 : D4 2006	QUALIFYING CONTINUOUS DUTY CLASS 1E MOTORS FOR NUCLEAR POWER GENERATING STATIONS
MIL B 45081 : E	BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR
IEEE 434 : 2006	FUNCTIONAL EVALUATION OF INSULATION SYSTEMS FOR AC ELECTRIC MACHINES RATED 2300 V AND ABOVE
ASTM F 1433 : 1997	SPECIFICATION FOR MECHANICALLY REFRIGERATED SHIPBOARD AIR CONDITIONER
MIL B 9925 : D	BORING MACHINES, JIB, VERTICAL, SINGLE COLUMN AND DOUBLE COLUMN BRIDGE TYPES, MANUAL AND POWER FEED
MIL P 80104 : D	PRESSES, SWAGING, WIRE ROPE FITTING, HYDRAULIC POWERED, ELECTRIC MOTOR DRIVEN
ASTM F 860 : 2007 : R2013	Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
API 618 : 2007	RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
MIL B 29205 : A	BOILERS, FLUIDIZED BED, STEAM AND HOT WATER, PACKAGED TYPE (330 TO 51,500 POUNDS PER HOUR THERMAL OUTPUT CAPACITY)
CSA C747	ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS
API 611 REDLINE : 2008	GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ABS 0063 : 2018 COR 2018	RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS
MIL F 80258 : A	FURNACES, HEAT-TREATING, ELECTRIC, NATURAL ATMOSPHERE, BOX TYPE
FM 1043 : 2011	WATER FLOW DETECTOR TESTERS 1 INCH THROUGH 8 INCH NOMINAL SIZE
A A 59471 : 0	DRY CLEANING PRESSES AND FINISHING EQUIPMENT (NAVAL SHIPBOARD)
CSA C392: 2011	TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
MIL PRF 26139 : E : 2015	TESTER, PRESSURIZED CABIN LEAKAGE, AIRCRAFT, (AF/M24T-3 AND AF/M32T-1)
MIL M 80255 : B	MACHINING CENTERS, VERTICAL, SINGLE SPINDLE, COMPUTER NUMERICAL CONTROL (CNC)
F B 2903 : 0	BOILERS, STEAM AND HOT WATER, FIRETUBE, SCOTCH PACKAGED TYPE (320,001 TO 35,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
MIL B 18966 : C	BLOCKING PLANT, CONCRETE
IEEE 1547.1 : 2005	CONFORMANCE TEST PROCEDURES FOR EQUIPMENT INTERCONNECTING DISTRIBUTED RESOURCES WITH ELECTRIC POWER SYSTEMS
IEEE 334 : 2007	QUALIFYING CONTINUOUS DUTY CLASS 1E MOTORS FOR NUCLEAR POWER GENERATING STATIONS
IEEE 946 : 2004	DESIGN OF DC AUXILIARY SYSTEMS FOR GENERATING SYSTEMS
A-A-59412 : A	SWAGING MACHINE, ROTARY, FLOOR-MOUNTED
DD CLC/TS 60034-31 : 2011	ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
A A 59332 : A	GRINDING MACHINE, CYLINDRICAL, EXTERNAL, CENTER-TYPE, COMPUTER NUMERICAL CONTROL (CNC)
CSA C390 : 2010	TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
BS ISO 20958 : 2013	CONDITION MONITORING AND DIAGNOSTICS OF MACHINE SYSTEMS - ELECTRICAL SIGNATURE ANALYSIS OF THREE-PHASE INDUCTION MOTORS
CSA C747 : 2009	ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS
MIL P 80054 : D	PUNCHING MACHINE, METAL, TURRET TYPE, NUMERICALLY CONTROLLED
NEMA MGW 1 : 2013	THE U.S. DEPARTMENT OF ENERGY SMALL ELECTRIC MOTOR STANDARDS FINAL RULE AND TECHNICAL SUPPORT DOCUMENT OF MARCH 9, 2010
MIL C 3925 : H	COMPRESSOR, RECIPROCATING AND ROTARY POWER DRIVEN, AIR [PAINT SPRAY TYPE]
CSA C392 : 2011 : INC : UPD 1 : 2011	TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
DD IEC TS 60034-31 : DRAFT JULY 2010	ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
CSA C392 : 2011	TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
MIL HDBK 705 : C	GENERATOR SETS, ELECTRICAL, MEASUREMENTS AND INSTRUMENTATIONS
MIL F 80113 : D	FURNACE, VACUUM, HEAT TREATING AND BRAZING
MIL F 80089 : B	FURNACES, HEAT-TREATING, GAS-FIRED, BOX-TYPE, DIRECT-FIRED AND FULL-MUFFLE DESIGN
MIL D 80002 : E	DRILLING MACHINE, UPRIGHT FLOOR TYPE, ROUND & BOX COLUMN, SLIDING HEAD, PLAIN TABLE, POWER FEED
IEEE 1068 : 2015	THE REPAIR AND REWINDING OF AC ELECTRIC MOTORS IN THE PETROLEUM, CHEMICAL, AND PROCESS INDUSTRIES
NEMA MG 11 : 1977(R2012)	ENERGY MANAGEMENT GUIDE FOR SELECTION AND USE OF SINGLE-PHASE MOTORS
API 680 : 1ED 87	PACKAGED RECIPROCATING PLANT AND INSTRUMENT AIR COMPRESSORS FOR GENERAL REFINERY SERVICES
ASAE EP329 : 2001	SINGLE-PHASE RURAL DISTRIBUTION SERVICE FOR MOTORS AND PHASE CONVERTERS
NEMA ICS 16 : 2001	MOTION/POSITION CONTROL MOTORS, CONTROLS, AND FEEDBACK DEVICES
A A 59200 : 0	GRINDING MACHINES, SURFACE, ROTARY TABLE, VERTICAL SPINDLE
MIL PRF 62331 : A	PUMP ASSEMBLY, BILGE, ELECTRIC MOTOR DRIVEN, DIRECT CURRENT
A A 50304 : 0	DYNAMOMETER, ENGINE RUN-IN, 500 HORSEPOWER CAPACITY
OO M 340 : F	MILLING, GRINDING, DRILLING, SLOTTING ATTACHMENT
MIL PRF 18953 : C	FANS, VANEAXIAL AND TUBEAXIAL, VENTILATION AND AIR CONDITIONING, NAVAL SHIPBOARD
BS EN 60034-30-1 : 2014	ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
MIL F 80233 : B	FURNACES, VACUUM, HEAT TREATING INTEGRAL QUENCH
OO J 571 : F	JOINTERS, WOODWORKING
MIL S 3788 : G	SHAPER, WOODWORKING
11/30247355 DC : 0	BS EN 60034-30 ED 2 - ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE-CODE)
SAE ARP 1148 : 2013	GROUND ELECTRICAL POWER UNIT, TRANSPORTABLE 115/200 VOLT AC (NOMINAL) 400 HERTZ, 3-PHASE 4-WIRE (GROUNDED NEUTRAL) Y-CONNECTED SYSTEM
MIL DTL 38195 : D	GENERATOR SET, GAS TURBINE ENGINE, 60 KW 400 HZ, GENERAL PURPOSE
NEMA MG 3 : 1974(R2014)	SOUND LEVEL PREDICTION FOR INSTALLED ROTATING ELECTRICAL MACHINES
AWWA E103 : 2015	HORIZONTAL AND VERTICAL LINE-SHAFT PUMPS
MIL P 17552 : F	PUMP UNITS, CENTRIFUGAL, WATER, HORIZONTAL, GENERAL SERVICE AND BOILER FEED, ELECTRIC MOTOR OR STEAM TURBINE DRIVEN
IEEE DRAFT C62.22 : D8 2005	GUIDE FOR THE APPLICATION OF METAL-OXIDE SURGE ARRESTERS FOR ALTERNATING-CURRENT SYSTEMS
IEEE DRAFT 387 : D9A MAR 95	DRAFT STANDARD CRITERIA FOR DIESEL-GENERATOR UNITS APPLIED AS STANDBY POWER SUPPLIES FOR NUCLEAR POWER GENERATING STATIONS
MIL S 24036 : E	SAWS, BAND, CUTOFF, HORIZONTAL, NON-ADJUSTABLE & ADJUSTABLE CUTTING ANGLE
MIL P 80276 : 0	PRESS BRAKES, HYDRAULICALLY OPERATED, SHEET AND PLATE, COMPUTER NUMERICALLY CONTROLLED (CNC)
BS PD IEC/TS 60034-30-2 : 2016	ROTATING ELECTRICAL MACHINES - PART 30-2: EFFICIENCY CLASSES OF VARIABLE SPEED AC MOTORS (IE-CODE)
A A 59392 : 0	GRINDING MACHINES, SURFACE, ROTARY TABLE, HORIZONTAL SPINDLE
MIL B 28685 : 0	BAGHOUSE, REVERSE PULSE JET; FOR PACKAGED BOILEK3 FIRED ON COAL OR A COMBINATION OF COAL AND GAS, COAL AND OIL, OR COAL-GAS-OIL (2,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
(INACTIVE RECORD)API 687 : 2001	ROTOR REPAIR
ASME HST 1M : 89(R1995)	PERFORMANCE STANDARD FOR ELECTRIC CHAIN HOISTS
KKK S 2922 : 0	SEMITRAILER, VAN; COMMERCIAL (FURNITURE, PERSONNEL, REFRIGERATOR, CARGO, AND SIDE CURTAIN) 7 TO 35 TON
MIL PRF 24751 : A	FANS, VANEAXIAL GAS TURBINE ENCLOSURE COOLING NAVAL SHIPBOARD
MIL G 53133 : B	GENERATOR SETS, SKID MOUNTED, TACTICAL, QUIET, DIESEL ENGINE DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR
MIL-PRF-80095E : 2015	SAWS, BAND, WOODWORKING
NEMA ICS8 : 2011	APPLICATION GUIDE FOR INDUSTRIAL CONTROL AND SYSTEMS CRANE AND HOIST CONTROLLERS
MIL L 13896 : E	LATHES, ENGINE, GAP, SLIDING BED AND REMOVABLE BLOCK
ASTM F 1966 : 2012	SPECIFICATION FOR DOUGH DIVIDER AND ROUNDING MACHINES
CSA C390 : 2010 : R2015	TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
MIL PRF 52109 : H	PUMPING ASSEMBLIES, PORTABLE, BULK TRANSFER FUEL AND WATER PUMPING SERVICE
MIL PRF 19004 : B	FANS, CENTRIFUGAL, VENTILATION, NAVAL SHIPBOARD
ASTM F 860 : 2007	Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
MIL P 80172 : C	PUNCHING MACHINE, METAL SINGLE END TYPE, NUMERICALLY CONTROLLED
MIL L 23251 : E	LATHES, ENGINE AND TOOLROOM 2516 AND 3220
CSA C392:2011	TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
A A 59285 : 0	SAWS, POWER, HACK
A A 59334 : 0	LATHE, ENGINE (STANDARD) AND TOOLROOM (PRECISION), HORIZONTAL SPINDLE
NEMA SM 24 : 1991(R2002)	LAND BASED STEAM TURBINE GENERATOR SETS 0 TO 33,000 kW
MIL B 12570 : D	BAKERY OVEN, TRAILER MOUNTED, M-533
XX C 2816 : A	COMPRESSOR, AIR, RECIPROCATING OR ROTARY, ELECTRIC MOTOR DRIVEN, STATIONARY, 10 HP AND LARGER
MIL PRF 24775 : A	AIR CONDITIONING FAN COIL UNITS, HORIZONTAL AND VERTICAL TYPES, NAVAL SHIPBOARD
ASTM F 1433 : 1997 : R2004	Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
CSA C392 : 2011 : INC : UPD 2 : 2012	TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
CSA C390 : 2010(R2015)	TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
HI 1.1-1.5 : 1994	CENTRIFUGAL PUMPS - NOMENCLATURE, DEFINITIONS, APPLICATIONS AND OPERATION
AWWA C542 : 2016	ELECTRIC MOTOR ACTUATORS FOR VALVES AND SLIDE GATES
ASTM F 1202 : 2016 : REDLINE	Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
CSA C392 : 2011:R2016	TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
ASME HST 4 : 1999 : R2004	PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS
MIL F 80133 : B	FURNACES, HEAT TREATING, PIT TYPE, ELECTRIC, FORCED CONVECTION
API 611 : 2008	GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
MIL G 52884 : A	GENERATOR SETS, DIESEL ENGINE DRIVEN, 15 THRU 200 KILOWATTS 50/60 & 400 HERTZ, (TACTICAL)
A A 59384 : B	PRESS, 'H' FRAME, HYDRAULIC
CSA C747 : 2009 : R2014	ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS
A A 50314 : 0	BORING MACHINES, ENGINE CYLINDER (PORTABLE)
CSA C392 : 2011 : R2016	TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
API 670 : 2014	MACHINERY PROTECTION SYSTEMS
CSA C390 : 2010 : INC : UPD 2 : 2016:R201500	TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
IEEE C50.12 : 2005	SALIENT-POLE 50 HZ AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE
EEMUA 151 : 1987	LIQUID RING VACUUM PUMPS AND COMPRESSORS
MIL B 45022 : F	BLAST CLEANING CABINETS
MIL PRF 24755 : B	FANS, VANEAXIAL, HIGH PRESSURE, NAVAL SHIPBOARD
IEEE 251 : 1984	DC TACHOMETER GENERATORS, TEST PROCEDURES FOR
CSA C390 : 2010 : INC : UPD 1 : 2015 : R201500	TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
MIL P 80186 : B	POSITIONERS, WELDING, ROTATING TABLE, CANTILEVER ARM DESIGN
MIL S 80271 : A	SHEARING MACHINE, METAL SQUARING MECHANICAL DRIVE
MIL S 80224 : A	SHEARING MACHINE, METAL NOTCHING, POWER DRIVEN
CSA C390:2010	TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
FM 1319 : 2018	CENTRIFUGAL FIRE PUMPS (HORIZONTAL, END SUCTION TYPE)
CSA C390 : 2010 : INC : UPD 2 : 2016 :R201500	TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
IEEE 958 : 2003	GUIDE FOR APPLICATION OF AC ADJUSTABLE-SPEED DRIVES ON 2400 TO 13,800 VOLT AUXILIARY SYSTEMS IN ELECTRIC POWER GENERATING STATIONS
PIP ELEMT01 : 2013	GUIDELINES FOR SELECTING IEEE AND API STANDARDS FOR AC MOTORS 250 HP (185 KW) AND LARGER
IEEE 95 : 2002	RECOMMENDED PRACTICE FOR INSULATION TESTING OF AC ELECTRIC MACHINERY (2300 V AND ABOVE) WITH HIGH DIRECT VOLTAGE
ASME HST 4 : 1999 : R	PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS
IEEE 597 : 1983	PRACTICES AND REQUIREMENTS FOR GENERAL PURPOSE THYRISTOR DC DRIVES
ASTM F 2361 : 2003 : R2009	Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
ASTM F 857 : 2017 : REDLINE	Standard Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
API 611 : 2008 : R2014	GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
IEC TS 60034-30-2 : 1ED 2016	ROTATING ELECTRICAL MACHINES - PART 30-2: EFFICIENCY CLASSES OF VARIABLE SPEED AC MOTORS (IE-CODE)
API 11P : 1989	SPECIFICATION FOR PACKAGED RECIPROCATING COMPRESSORS FOR OIL AND GAS PRODUCTION SERVICES
CSA C392 : 2011 : INC : UPD 2:2012	TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
IEEE C37.100.1 : 2007	COMMON REQUIREMENTS FOR HIGH VOLTAGE POWER SWITCHGEAR RATED ABOVE 1000 V
FORD W EM1 : 0	GLOBAL MANUFACTURING STANDARDS - AC ELECTRIC MOTORS TOTALLY ENCLOSED TYPE
API 618 : 2007 : R2016	RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
(INACTIVE RECORD) API 618 : 2007	RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
IEEE 117 : 1974	TEST PROCEDURE FOR THERMAL EVALUATION OF SYSTEMS OF INSULATING MATERIALS FOR RANDOM-WOUND AC ELECTRIC MACHINERY
IEEE DRAFT C37.100.1 : D9 2007	COMMON REQUIREMENTS FOR HIGH VOLTAGE POWER SWITCHGEAR RATED ABOVE 1000 V
API 687 : 2001 : R2015	ROTOR REPAIR
API TR 11L6 : 2008	TECHNICAL REPORT ON ELECTRIC MOTOR PRIME MOVER FOR BEAM PUMPING UNIT SERVICE
HI 2.3 : 2013	ROTODYNAMIC VERTICAL PUMPS OF RADIAL, MIXED, AND AXIAL FLOW TYPES FOR DESIGN AND APPLICATION
I.S. EN 60034-30-1:2014	ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
API 546 : 2008	BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
NEMA MG 7 : 93 REV 1 96	MOTION/POSITION CONTROL MOTORS AND CONTROLS
(INACTIVE RECORD)API 611:2008	GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
SAE ARP 5015 : 2011	GROUND EQUIPMENT - 400 HERTZ GROUND POWER PERFORMANCE REQUIREMENTS
API STD 541 : 2014	FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
API 687 : 2001	ROTOR REPAIR
FM 1312 : 2018	CENTRIFUGAL FIRE PUMPS (VERTICAL-SHAFT, TURBINE TYPE)
IEEE DRAFT C50.12 : D10 2004	SALIENT-POLE 50 AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE
IEEE C50.13 : 2014	CYLINDRICAL-ROTOR 50 HZ AND 60 HZ, SYNCHRONOUS GENERATORS RATED 10 MVA AND ABOVE
I.S. EN 60034-30:2009	ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS
API 11PGT : 1992	RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES
ANSI C37.06 : 2009	AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
IEEE 333 : 1980	ELECTRICAL INSTALLATIONS OF PACKAGING MACHINERY AND ASSOCIATED EQUIPMENT, STANDARD FOR
IEEE 67 : 2005	GUIDE FOR OPERATION AND MAINTENANCE OF TURBINE GENERATORS
IEEE DRAFT C37.96 : D5 99	DRAFT GUIDE FOR AC MOTOR PROTECTION
IEEE 499 : 1997	RECOMMENDED PRACTICE FOR CEMENT PLANT ELECTRIC DRIVES AND RELATED ELECTRICAL EQUIPMENT
IEEE 1349 : 2011	GUIDE FOR THE APPLICATION OF ELECTRIC MOTORS IN CLASS 1, DIVISION 2 AND CLASS 1, ZONE 2 HAZARDOUS (CLASSIFIED) LOCATIONS
IEEE 43 : 2013	RECOMMENDED PRACTICE FOR TESTING INSULATION RESISTANCE OF ELECTRIC MACHINERY
IEEE 841 : 2009	PETROLEUM AND CHEMICAL INDUSTRY - PREMIUM-EFFICIENCY, SEVERE-DUTY, TOTALLY ENCLOSED FAN-COOLED (TEFC) SQUIRREL CAGE INDUCTION MOTORS - UP TO AND INCLUDING 370 KW (500 HP)
IEEE 114 : 2010	TEST PROCEDURES FOR SINGLE-PHASE INDUCTION MOTORS
IEEE 551 : 2006	CALCULATING SHORT-CIRCUIT CURRENTS IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE 1001 : 1988
IEEE 2030.2 : 2015	GUIDE FOR THE INTEROPERABILITY OF ENERGY STORAGE SYSTEMS INTEGRATED WITH THE ELECTRIC POWER INFRASTRUCTURE
IEEE 290 : 1980	ELECTRIC COUPLINGS: GENERAL, RATING, PERFORMANCE CHARACTERISTICS: TEST PROCEDURES
IEEE 1415 : 2006	INDUCTION MACHINERY MAINTENANCE TESTING AND FAILURE ANALYSIS
IEEE 1547.4 : 2011	GUIDE FOR DESIGN, OPERATION, AND INTEGRATION OF DISTRIBUTED RESOURCE ISLAND SYSTEMS WITH ELECTRIC POWER SYSTEMS
IEEE 433 : 2009	RECOMMENDED PRACTICE FOR INSULATION TESTING OF AC ELECTRIC MACHINERY WITH HIGH VOLTAGE AT VERY LOW FREQUENCY
IEEE 115 : 2009	TEST PROCEDURES FOR SYNCHRONOUS MACHINES - PART 1: ACCEPTANCE AND PERFORMANCE TESTING - PART 2: TEST PROCEDURES AND PARAMETER DETERMINATION FOR DYNAMIC ANALYSIS
ASTM F 2361 : 2003	Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
IEEE 112 : 2004	TEST PROCEDURE FOR POLYPHASE INDUCTION MOTORS AND GENERATORS
NETA ATS : 2017	ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
IEEE DRAFT 1476 : D4.1 NOV 99	DRAFT STANDARD FOR PASSENGER TRAIN AUXILIARY POWER SYSTEMS INTERFACES
FM 1370 : 2018	CENTRIFUGAL FIRE PUMPS (VERTICAL SHAFT, TURBINE TYPE, BARREL)
FM 1311 : 2018	CENTRIFUGAL FIRE PUMPS SPLIT-CASE TYPE (AXIAL OR RADIAL)
PIP ELSMT01 : 2012	AC SQUIRREL CAGE INDUCTION MOTOR SPECIFICATION (4000 VOLTS AND BELOW)
SR CLC/TS 60034-31:2011	ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
CSA C838 : 2013	ENERGY EFFICIENCY TEST METHODS FOR THREE-PHASE VARIABLE FREQUENCY DRIVE SYSTEMS
PIP RESE001 : 2017	GENERAL PURPOSE SKID-MOUNTED PACKAGED EQUIPMENT SPECIFICATION
CSA C747:	ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS
ASTM F 860 : 2007 : R2018 : EDT 1	Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
IEEE 1159 : 2009	RECOMMENDED PRACTICE FOR MONITORING ELECTRIC POWER QUALITY
ASTM F 1203 : 2016 : REDLINE	Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
CSA C391 : 2015	TESTING OF THREE-PHASE SYNCHRONOUS MACHINES DURING REFURBISHMENT
ASTM F 1433 : 1997	Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
CSA S6 : 2014	CANADIAN HIGHWAY BRIDGE DESIGN CODE
HI 1.3 : 2013	ROTODYNAMIC CENTRIFUGAL PUMPS FOR DESIGN AND APPLICATION
IEEE DRAFT 434 : D10 2006	FUNCTIONAL EVALUATION OF INSULATION SYSTEMS FOR AC ELECTRIC MACHINES RATED 2300 V AND ABOVE
ASTM F 2645 : 2016 : REDLINE	Standard Specification for Bun Slicing Machines
IEEE DRAFT 1068 : D3 JUN 96	RECOMMENDED PRACTICE FOR THE REPAIR AND REWINDING OF MOTORS FOR THE PETROLEUM AND CHEMICAL INDUSTRY
ASTM F 2643 : 2015 : REDLINE	Standard Specification for Powered Pot, Pan and Utensil Washing Sinks
ASTM F 1433 : 1997 : R2010	Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner (Withdrawn 2019)
ISO 20958 : 2013	CONDITION MONITORING AND DIAGNOSTICS OF MACHINE SYSTEMS - ELECTRICAL SIGNATURE ANALYSIS OF THREE-PHASE INDUCTION MOTORS
API 14FZ : 2013	RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS
(INACTIVE RECORD) API 540 : 1999	ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
API 614 : 2008	LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
API 14F REDLINE : 2008	DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
IEEE 1476 : 2000	PASSENGER TRAIN AUXILIARY POWER SYSTEMS INTERFACES
MIL D 12491 : E	DEGREASER, SOLVENT, TANK IMMERSION TYPE
MIL B 17452 : E	BOILERS, STEAM AND HOT WATER, FIRETUBE - SCOTCH PACKAGED TYPE (320,001 TO 35,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
MIL L 80277 : 0	LATHES, PRECISION, TOOLROOM, VARIABLE SPEED, 11-INCH THROUGH 13-INCH
A A 59335 : 0	SAW, BAND, CUTOFF, HORIZONTAL, AND COMBINATION HORIZONTAL AND VERTICAL
UFC 3-230-01 : Change 2	UNIFIED FACILITIES CRITERIA - WATER STORAGE, DISTRIBUTION, AND TRANSMISSION
ASTM C 1615 : 2010-07	GUIDE FOR MECHANICAL DRIVE SYSTEMS FOR REMOTE OPERATION IN HOT CELL FACILITIES
IEEE 741 : 2007	CRITERIA FOR THE PROTECTION OF CLASS 1E POWER SYSTEMS AND EQUIPMENT IN NUCLEAR POWER GENERATING STATIONS
MIL DTL 53135 : 0	AUXILIARY POWER UNIT, 10 KW, 120/240 VAC, 60 HZ
CSA C747 : 2009	ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS
ASME B73.2M : 91(R1999)	PUMPS - SPECIFICATION FOR VERTICAL IN-LINE CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS
CLC/TS 60034-31 : 2011	ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
CSA C747 :	ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS
ASME OM S/G : 2007	Standards and Guides for Operation and Maintenance of Nuclear Power Plants (OM-S/G - 2007)
API 14F:2008	DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
API 540:1999	ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
API 614 REDLINE : 2008	LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
API 540 : 1999 : R2006	ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
API 14F : 2008 : R2013	DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
ASTM F 1966 : 2012	Standard Specification for Dough Divider and Rounding Machines
ASTM F 2361 : 2003	GUIDE FOR ORDERING LOW VOLTAGE (1000 VAC OR LESS) ALTERNATING CURRENT ELECTRIC MOTORS FOR SHIPBOARD SERVICE - UP TO AND INCLUDING MOTORS OF 500 HORSEPOWER
ASTM F 1966 : 2012 : R2017 : EDT 1	Standard Specification for Dough Divider and Rounding Machines
ASTM F 2361 : 2003 : R2013	Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
(INACTIVE RECORD) API 14F : 2008	DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
ASHRAE 90.4 : 2016	ENERGY STANDARD FOR DATA CENTERS
IEC 60034-27-4 : 1.0 :2018	ROTATING ELECTRICAL MACHINES - PART 27-4: MEASUREMENT OF INSULATION RESISTANCE AND POLARIZATION INDEX OF WINDING INSULATION OF ROTATING ELECTRICAL MACHINES
IEC/IEEE PAS 63547 : 1ED 2011	INTERCONNECTING DISTRIBUTED RESOURCES WITH ELECTRIC POWER SYSTEMS
IEC TS 60034-31 : 1.0	ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
ISO 10436 : 1993	PETROLEUM AND NATURAL GAS INDUSTRIES - GENERAL-PURPOSE STEAM TURBINES FOR REFINERY SERVICE
ASME AG-1 : 2019	CODE ON NUCLEAR AIR AND GAS TREATMENT
ASME AG 1 : 2012	CODE ON NUCLEAR AIR AND GAS TREATMENT
NFPA 79 : 2018	ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
NFPA 1901 : 2016	AUTOMOTIVE FIRE APPARATUS
NFPA 70B : 2016	RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
NFPA 20 HDBK : 2016	STATIONARY FIRE PUMPS HANDBOOK
EN ISO 14224 : 2016 COR 2016	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016, CORRECTED VERSION 2016-10-01)
IEC 60034-30-1 : 1ED 2014	ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
IEC 60034-30 : 1.0	ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE-CODE)
ISO 19859 : 2016-06	GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
ISO 10438-2 : 2007(R2018)	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 2: SPECIAL-PURPOSE OIL SYSTEMS
BS EN ISO 10438-3 : 2003	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 3: GENERAL-PURPOSE OIL SYSTEMS
14/30244780 DC : 0	BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS EN ISO 14224 : 2016	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
BS ISO 19859 : 2016	GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
ISO 10438-3 : 2007(R2017)	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 3: GENERAL-PURPOSE OIL SYSTEMS
BS EN ISO 10438-2 : 2003	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 2: SPECIAL-PURPOSE OIL SYSTEMS
ISO 14224 : 2016	PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
NASA STD 5005 : 2013	STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA STD 5005(INT) : 2007	THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA KSC DE 512-SM : 2012	FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
ICC IECC CODE AND COMMENTARY : 2015	IECC® Code and Commentary
NASA SSTD 8070 0081 : 2001	FACILITY ELECTRICAL STANDARD
NASA KSC STD Z 0010 : 1983	DESIGN OF ENVIRONMENTAL CONTROL SYSTEMS, GROUND COOLANT SYSTEMS, COOLANT SERVICING SYSTEMS, AND GROUND SUPPORT EQUIPMENT, STANDARD FOR
CSA N290.8 : 2015	TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS
ASTM F 2363/F2363M : 2017 : REDLINE	Standard Specification for Sewage and Graywater Flow Through Treatment Systems
ASTM F 2283 : 2012-09	SPECIFICATION FOR SHIPBOARD OIL POLLUTION ABATEMENT SYSTEM
NEMA ICS 10.1 : 2005	INDUSTRIAL CONTROL AND SYSTEMS - PART 1: ELECTROMECHANICAL AC TRANSFER SWITCH EQUIPMENT
NEMA ICS 10.2 : 2005	INDUSTRIAL CONTROL AND SYSTEMS - PART 2: STATIC AC TRANSFER EQUIPMENT
NFPA 79 HDBK : 2015	INDUSTRIAL MACHINERY HANDBOOK

Sorry this product is not available in your region.

NEMA MG 1 : 2016

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?