SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL

Published date

01-12-2013

Publisher

Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Liste des phénomènes dangereux significatifs
5 Prescriptions et/ou mesures de sécurité
  5.1 Prescriptions générales de conception
  5.2 Liste des phénomènes dangereux significatifs,
      situations dangereuses, prescriptions et/ou
      mesures de sécurité
  5.3 Prescription spéciales concernant la prévention et la
      protection contre l'explosion
  5.4 Réduction du bruit comme mesure de sécurité
6 Vérification des prescriptions et/ou mesures de sécurité
7 Informations pour l'utilisation
  7.1 Panneaux de sécurité et dispositifs d'avertissement
  7.2 Documents d'accompagnement
  7.3 Marquage minimal
  7.4 Formation du personnel
Annexe A (normative) Code d'essai acoustique
  A.1 Introduction
  A.2 Détermination du niveau de puissance acoustique
      pondéré A
  A.3 Détermination des niveaux de pression acoustique
      d'émission pondérés A
  A.4 Incertitude de mesure
  A.5 Conditions d'utilisation
  A.6 Informations à relever et à consigner
  A.7 Déclaration et vérification des valeurs d'émission
      acoustique
  A.8 Exemples de postes de travail pour un procédé RH
      avec four-poche
Annexe B (informative) Exemples d'équipements de
         métallurgie secondaire
Annexe C (informative) Exemples de procédés de
         métallurgie secondaire
Annexe ZA (informative) Relation entre la présente Norme
          européenne et les exigences essentielles de la
          Directive UE 98/37/CE
Annexe ZB (informative) Relation entre la présente Norme
          européenne et les exigences essentielles de la
          Directive UE 2006/42/CE
Annexe ZC (informative) Relation entre la présente Norme
          européenne et les exigences essentielles de la
          Directive UE 94/9/CE
Bibliographie

La présente Norme européenne spécifie les prescriptions de sécurité générales pour les machines et les équipements de métallurgie secondaire (EMS), tels que définis en 3.1, pour le traitement d'acier liquide. La présente Norme européenne couvre les machines et les équipements impliqués dans le processus de traitement d'acier liquide sous vide ou sous pression atmosphérique. La présente Norme européenne traite tous les phénomènes, situations et événements dangereux significatifs pertinents pour les EMS, durant l'utilisation normale et dans des conditions prévues par le fabricant, mais inclut aussi des défauts et défaillances prévisibles en cas de mauvais usage.

DevelopmentNote	Indice de classement: E88-004. PR NF EN 14677 July 2003. (07/2003)
DocumentType	Standard
PublisherName	Association Francaise de Normalisation
Status	Current

Standards	Relationship
EN 14677:2008	Identical

NF EN 50171 : 2001	CENTRAL POWER SUPPLY SYSTEMS
NF EN 60519-4 : 2014	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS
NF EN ISO 7731 : 2008	ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS
IEC 60079-10:2002	Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
NF EN ISO 14122-2 : 2017	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS
NF EN 61241-10 : 2004	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 10: CLASSIFICATION OF AREAS WHERE COMBUSTIBLE DUSTS ARE OR MAY BE PRESENT
NF EN ISO 12100-1 : 2004 AMD 1 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
NF EN 60204-1 : 2006 AMD 1 2009	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 61310-2:2007	Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
NF EN ISO 11064-1 : 2001	ERGONOMIC DESIGN OF CONTROL CENTRES - PART 1: PRINCIPLES FOR THE DESIGN OF CONTROL CENTRES
NF EN ISO 14122-4 : 2017	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 4: FIXED LADDERS
NF EN 12464-1 : 2011	LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 1: INDOOR WORK PLACES
NF EN 61310-2 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
NF EN 60079-10 : 2003	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - CLASSIFICATION OF HAZARDOUS AREAS
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
NF EN 349 : 1993 + A1 2008	SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
NF EN 1037 : 1996 + A1 2008	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
NF EN 983 : 1996 + A1 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
NF EN ISO 13850 : 2015	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN
NF EN 1127-1 : 2011	EXPLOSIVES ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
NF EN 746-2 : 2010	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
NF EN 12094-1 : 2003	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR ELECTRICAL AUTOMATIC CONTROL AND DELAY DEVICES
NF EN 13463-1 : 2009	NON-ELECTRICAL EQUIPMENT FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
NF EN 1088 : 1996 + A2 2008	SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
NF EN 61310-1 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
NF EN ISO 11202 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
NF EN 894-3 : 2000 + A1 2008	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
NF EN ISO 4871 : 2009	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
NF EN 13463-5 : 2011	NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
NF EN 13478 : 2002 + A1 2008	SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
NF EN 61241-14 : 2004	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 14: SELECTION AND INSTALLATION
NF EN 1837 : 1999 + A1 2009	SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
NF EN 981 : 1997 + A1 2008	SAFETY OF MACHINERY - SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS
IEC 60079-0:2011	Explosive atmospheres - Part 0: Equipment - General requirements
NF EN 614-2 : 2000 + A1 2008	SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS
IEC 60079-14:2013	Explosive atmospheres - Part 14: Electrical installations design, selection and erection
NF EN 294 : 1992	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
NFX 05 005 : 91 FD	GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - INDEX AND SYNOPSIS
NF EN 60079-0 : 2013 AMD 11 2014	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
NF EN 811 : 1996	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
IEC 61310-1:2007	Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
NF EN 620 : 2002 + A1 2011
NF EN ISO 13849-1 : 2016	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
NF EN ISO 14122-1 : 2017	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS AND GENERAL REQUIREMENTS OF ACCESS
1998/37/EC : 1998	DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
NF EN ISO 14122-3 : 2017	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS
NF EN ISO 13732-1 : 2008	ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES
NF EN ISO 14121-1 : 2007	SAFETY OF MACHINERY - RISK ASSESSMENT - PART 1: PRINCIPLES
NF EN 15004-1 : 2008	FIXED FIREFIGHTING SYSTEMS - GAS EXTINGUISHING SYSTEMS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE
NF EN 982 : 1996 + A1 2008	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
NF EN ISO 12100-2 : 2004 AMD 1 2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
NF EN 60079-14 : 2014	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
IEC 60519-4:2013	Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations
IEC 61241-14:2004	Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
IEC 61241-10:2004	Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present
NF EN ISO 11688-1 : 2009	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING
1994/9/EC : 1994	DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
NF EN 953 : 1997 + A1 2009	SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
NF EN 614-1 : 2006 + A1 2009	SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES