NF EN 1474-1 : 2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
12-01-2016
01-12-2013
Avant-propos
1 Domaine d'application
2 Références normatives
3 Termes, définitions et abréviations
4 Conception des bras
4.1 Définition de la longueur et de la configuration
des bras, description des bras
4.2 Principes de conception
4.3 Articulations des rotations
4.4 Articulations de structure
4.5 Accessoires
4.6 Canalisations et robinetterie
4.7 Soudage
4.8 Protection contre la corrosion, le feu et la fragilisation
4.9 Maintenance
5 Systèmes de sécurité
5.1 Généralités
5.2 Système d'arrêt et d'alarme à deux phases
5.3 Systèmes de controle et d'alarme
5.4 Définition des enveloppes des alarmes
5.5 Dispositifs de sécurité
6 Connexion au navire
6.1 Généralités
6.2 Corps QCDC
6.3 Système QCDC
7 Systèmes de controle hydraulique et électrique
7.1 Généralités
7.2 Fonctionnement des bras
7.3 Composants hydrauliques
7.4 Composants électriques
7.5 Essais du système de commande
7.6 Dispositif de commande à distance
7.7 Équipement extérieur sur la jetée
8 Controle et essais
8.1 Généralités
8.2 Essais de qualification
8.3 Fabrication
8.4 Essais en usine
9 Controle et assurance de la qualité
9.1 Système qualité
9.2 Plan qualité
10 Documentation exigée
10.1 Documentation d'appel d'offres
10.2 Documentation contractuelle
Annexe A (informative) Matériaux
Annexe B (informative) Système de controle permanent
des positions (CPMS)
Annexe C (informative) Suggestions pour le réglage des
alarmes des bras et l'activation des ESD/ERS
Annexe D (normative) Tableaux D.1 à D.17 et Figures
D.1 à DA
Annexe E (informative) Figures E1 à E3
Bibliographie
Cette Norme Européenne spécifie les règles de conception, les prescriptions minimales de sécurité ainsi que les procédures de controle et d'essais relatifs aux bras de chargement/déchargement de gaz naturel liquéfié (GNL) destinés à être utilisés sur des terminaux terrestres conventionnels 1. Elle fixe également les prescriptions minimales permettant de garantir que le transfert de GNL entre le navire et le terminal s'effectue en toute sécurité. Bien que la présente norme s'applique aux systèmes de télécommande, elle ne fixe pas tous les détails relatifs à la conception et à la fabrication des pièces normalisées et des raccords des bras de chargement/déchargement. Le contenu de cette Norme Européenne vient compléter les normes et règlements locaux ou nationaux, et s'ajoutent aux dispositions des normes EN 1532 et EN 1473.
| DevelopmentNote |
Indice de classement: M51-004-1. PR NF EN 1474-1 August 2006. (08/2006) Supersedes NF EN 1474. (03/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 1474-1:2008 | Identical |
| NF EN 1474-3 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 3: OFFSHORE TRANSFER SYSTEMS |
| NF EN 1474-2 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 2: DESIGN AND TESTING OF TRANSFER HOSES |
| NF EN 60079-2 : 2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| NF EN 1532 : 1997 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP TO SHORE INTERFACE |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| NF EN 60034-5 : 2001 AMD 1 2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| NF EN 13463-8 : 2004 | NON-ELECTRICAL EQUIPMENT FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 8: PROTECTION BY LIQUID IMMERSION 'K' |
| NF EN 1092-4 : 2002 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 4: ALUMINIUM ALLOY FLANGES |
| NF EN 12308 : 1998 | INSTALLATIONS AND EQUIPMENT FOR LNG - SUITABILITY TESTING OF GASKETS DESIGNED FOR FLANGED JOINTS USED ON LNG PIPING |
| NF EN 12560-6 : 2004 | FLANGES AND THEIR JOINTS - GASKETS FOR CLASS-DESIGNATED FLANGES - PART 6: COVERED SERRATED METAL GASKETS FOR USES WITH STEEL FLANGES |
| NF EN 60079-10 : 2003 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - CLASSIFICATION OF HAZARDOUS AREAS |
| NF EN 60079-6 : 2016 | EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY LIQUID IMMERSION 'O' |
| NF EN 60079-11 : 2012 | EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' |
| NF EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| NF EN ISO 1460 : 1995 | METALLIC COATINGS - HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS - GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA |
| NF EN 12560-5 : 2001 | FLANGES AND THEIR JOINTS - GASKETS FOR CLASS-DESIGNATED FLANGES - PART 5: METALLIC RING-JOINT GASKETS FOR USE WITH STEEL FLANGES |
| IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| NF EN 12560-4 : 2001 | FLANGES AND THEIR JOINTS - GASKETS FOR CLASS-DESIGNATED FLANGES - PART 4: CORRUGATED, FLAT OR GROOVED METALLIC AND FILLED METALLIC GASKETS FOR USE WITH STEEL FLANGES |
| NF EN 287-1 : 2011 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 1: STEELS |
| NF EN ISO 1461 : 2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| NF EN 1991 1-4 : 2005 AMD 1 2010 | EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
| NF EN 12567 : 2000 | INDUSTRIAL VALVES - ISOLATING VALVES FOR LNG - SPECIFICATION FOR SUITABILITY AND APPROPRIATE VERIFICATION TESTS |
| NF EN 60529 : 92 AMD 2 2014 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| NF EN 12266-1 : 2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 1: PRESSURE TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - MANDATORY REQUIREMENTS |
| NF EN 1759-1 : 2005 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 1: STEEL FLANGES NPS 1/2 TO 24 |
| NF EN 13463-1 : 2009 | NON-ELECTRICAL EQUIPMENT FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| NF EN 10204 : 2005 | METALLIC PRODUCTS - TYPES OF INSPECTION DOCUMENTS |
| NF EN 60079-25 : 2011 | EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| NF EN 60079-1 : 2015 | EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
| NF EN 60079-7 : 2016 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' |
| NF EN 13463-2 : 2005 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 2: PROTECTION BY FLOW RESTRICTING ENCLOSURES "FR" |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| NF EN 1435 : 97 AMD 2 2004 | NON-DESTRUCTIVE EXAMINATION OF WELDS - RADIOGRAPHIC EXAMINATION OF WELDED JOINTS |
| NF EN 13463-5 : 2011 | NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C' |
| NF EN 12560-2 : 2013 | FLANGES AND THEIR JOINTS - GASKETS FOR CLASS-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES |
| NF EN 12560-3 : 2001 | FLANGES AND THEIR JOINTS - GASKETS FOR CLASS-DESIGNATED FLANGES - PART 3: NON-METALLIC PTFE ENVELOPE GASKETS |
| IEC 60079-25:2010 | Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
| NF EN 1473 : 2017 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| NF EN 875 : 1995 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - IMPACT TESTS - TEST SPECIMEN LOCATION, NOTCH ORIENTATION AND EXAMINATION |
| IEC 60079-6:2015 | Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| NF EN 1514-1 : 1997 | FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES - PART 1: NON-METALLIC FLAT GASKETS WITH OR WITHOUT INSERTS |
| NF EN 60079-5 : 2015 | EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q' |
| NF EN 60079-0 : 2013 AMD 11 2014 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| NF EN 1160 : 1996 | INSTALLATIONS AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - GENERAL CHARACTERISTICS OF LIQUEFIED NATURAL GAS |
| NF EN ISO 9001 : 2015 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| NF EN 12266-2 : 2012 | INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS |
| NF EN 571-1 : 1997 | NON DESTRUCTIVE TESTING - PENETRANT TESTING - PART 1: GENERAL PRINCIPLES |
| NF EN 12560-1 : 2001 | FLANGES AND THEIR JOINTS - GASKETS FOR CLASS-DESIGNATED FLANGES - PART 1: NON-METALLIC FLAT GASKETS WITH OR WITHOUT INSERTS |
| NF EN 62305-3 : 2012 | PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
| NF EN 1092-1 : 2007 + A1 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| IEC 62305-3:2010 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| NF EN ISO 10497 : 2010 | TESTING OF VALVES - FIRE TYPE-TESTING REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.