• There are no items in your cart

NF EN 14753 : 2008

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
Superseded date

04-01-2022

Published date

01-12-2013

Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Liste des phénomènes dangereux
5 Prescriptions et/ou mesures de sécurité
  5.1 Généralités
  5.2 Liste des phénomènes dangereux, des situations
      dangereuses et des prescriptions et/ou
      mesures de sécurité
  5.3 Prescriptions et/ou mesures de sécurité spéciales
  5.4 Réduction du bruit par mesure de sécurité
6 Vérification des prescriptions et/ou mesures de sécurité
7 Informations pour l'utilisation
  7.1 Signaux et dispositifs avertisseurs
  7.2 Documents d'accompagnement
  7.3 Marquage minimal
  7.4 Formation du personnel
Annexe A (normative) Exigences et/ou mesures de
         sécurité pour les équipements et commandes
         électriques
  A.1 Généralités
  A.2 Exigences spéciales relatives aux commandes
  A.3 Exigences spéciales relatives aux équipements d'arrêt
Annexe B (normative) Équipement d'une CCM couverte
         par la présente norme
  B.1 Plate-forme de coulée
  B.2 Équipement de la machine de coulée
  B.3 Zone de découpage
  B.4 Zone de coulage (décharge)
  B.5 Équipement général
Annexe C (normative) Code d'essai acoustique
  C.1 Introduction
  C.2 Détermination du niveau de puissance acoustique
  C.3 Détermination des niveaux de pression acoustique
      d'émission
  C.4 Incertitude de mesure
  C.5 Conditions de fonctionnement
  C.6 Informations à enregistrer et à rapporter
  C.7 Déclaration et vérification des valeurs d'émission
      acoustique
Annexe ZA (informative) Relation entre la présente Norme
          européenne et les exigences essentielles de la
          Directive UE 98/37/CE
Annexe ZB (informative) Relation entre la présente Norme
          européenne et les exigences essentielles de la
          Directive UE 2006/42/CE
Bibliographie

La présente Norme européenne s'applique aux installations (contenant des machines et équipements) utilisés dans les procédés de coulée continue d'acier liquide (ci-après référée comme machine de coulée continue, CCM) comme défini au 3.1 et illustré à l'Annexe B. La présente Norme européenne traite de tous les des phénomènes, situations et évènements dangereux pertinents pour les machines et équipements pour la coulée continue de l'acier, lorsqu'ils sont utilisés comme prévu et dans des conditions de mauvaise utilisation raisonnablement prévisibles par le fabricant. La présente Norme européenne spécifie les exigences de sécurité à satisfaire pendant la conception, l'assemblage, le transport, la mise en service, le fonctionnement, la maintenance (comme décrit à l'Article 5) et la mise hors service des équipements. La présente Norme européenne suppose que les machines et équipements de l'installation sont utilisées et entretenues par un personnel convenablement formé et compétent. Les interventions manuelles pour les réglages, ajustements et maintenance font partie de l'utilisation normale de ces machines. La présente Norme européenne suppose que les machines sont utilisées avec un éclairage adapté au poste de travail conformément à l'EN 12464-1.

DevelopmentNote
Indice de classement: E88-005. PR NF EN 14753 November 2003. (11/2003)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Superseded
SupersededBy

Standards Relationship
EN 14753:2007 Identical

NF EN ISO 13857 : 2008 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
NF EN 50171 : 2001 CENTRAL POWER SUPPLY SYSTEMS
NF EN ISO 7731 : 2008 ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS
NF EN ISO 14122-2 : 2017 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS
NF EN ISO 12100-1 : 2004 AMD 1 2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
NF EN 626-1 : 1994 + A1 2008 SAFETY OF MACHINERY - REDUCTION OF RISK TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS
NF EN 60204-1 : 2006 AMD 1 2009 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
NF EN ISO 11064-1 : 2001 ERGONOMIC DESIGN OF CONTROL CENTRES - PART 1: PRINCIPLES FOR THE DESIGN OF CONTROL CENTRES
NF EN ISO 14122-4 : 2017 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 4: FIXED LADDERS
NF EN 61310-2 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING
NF EN 349 : 1993 + A1 2008 SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
NF EN 1037 : 1996 + A1 2008 SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
NF EN 983 : 1996 + A1 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
NF EN 626-2 : 1996 + A1 2008 SAFETY OF MACHINERY - REDUCTION OF RISK TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 2: METHODOLOGY LEADING TO VERIFICATION PROCEDURES
NF EN 842 : 1996 + A1 2008 SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
NF EN ISO 15004-1 : 2009 OPHTHALMIC INSTRUMENTS - FUNDAMENTAL REQUIREMENTS AND TEST METHODS - PART 1: GENERAL REQUIREMENTS APPLICABLE TO ALL OPHTHALMIC INSTRUMENTS
NF EN 12094-1 : 2003 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR ELECTRICAL AUTOMATIC CONTROL AND DELAY DEVICES
NF EN 1088 : 1996 + A2 2008 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
FD ISO 7000 : 2004 FD SYMBOLES GRAPHIQUES UTILISABLES SUR LE MATERIEL - INDEX ET TABLEAU SYNOPTIQUE
NF EN 61310-1 : 2008 SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
NF EN ISO 11202 : 2010 ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
NF EN ISO 4871 : 2009 ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
NF EN 13478 : 2002 + A1 2008 SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
NF EN 1837 : 1999 + A1 2009 SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES
NF EN 981 : 1997 + A1 2008 SAFETY OF MACHINERY - SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS
NF EN 614-2 : 2000 + A1 2008 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS
NF EN 811 : 1996 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
NF EN 574 : 1997 + A1 2008 SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
NF EN 60405 : 2008 NUCLEAR INSTRUMENTATION - CONSTRUCTIONAL REQUIREMENTS AND CLASSIFICATION OF RADIOMETRIC GAUGES
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
NF EN ISO 14122-3 : 2017 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS
NF EN ISO 13732-1 : 2008 ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES
NF EN ISO 14121-1 : 2007 SAFETY OF MACHINERY - RISK ASSESSMENT - PART 1: PRINCIPLES
NF EN 982 : 1996 + A1 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
NF EN ISO 12100-2 : 2004 AMD 1 2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 7745:2010 Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use
NF EN 953 : 1997 + A1 2009 SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
NF EN 614-1 : 2006 + A1 2009 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.