EN ISO 3580:2017
|
Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017)
|
EN 10052:1993
|
Vocabulary of heat treatment terms for ferrous products
|
EN 3969:2006
|
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D ≤ 350 mm
|
EN 10028-1:2017
|
Flat products made of steels for pressure purposes - Part 1: General requirements
|
AWS A5.5/A5.5M : 2014
|
SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
|
EN 3972:2006
|
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De ≤ 50 mm - 1 250 MPa ≤ Rm ≤ 1 400 MPa
|
EN 4332:2002
|
Aerospace series - Steel FE-WL1805 (8CrMnMo12-4-9) - Filler metal for welding - Wire and rod
|
EN 4632-001:2008
|
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements
|
EN 3523 : 2007
|
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De ≤ 100 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
|
ASTM A 516/A516M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
|
EN ISO 4063:2010
|
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
|
EN 10025:1990/A1:1993
|
HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
|
EN 4334:2002
|
Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod
|
EN 4098:2007
|
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Remelted, hardened and tempered, forgings De ≤ 50 mm, 1 250 MPa ≤ Rm ≤ 1 400 MPa
|
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
|
EN 1011-2:2001/A1:2003
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
|
ISO/TR 17671-2:2002
|
Welding Recommendations for welding of metallic materials Part 2: Arc welding of ferritic steels
|
EN 3524:2007
|
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm ≤ a ≤ 6 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
|
EN 3525:2007
|
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
|
EN 10222-3:2017
|
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
|
EN ISO 14341:2011
|
Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010)
|
EN ISO 2560:2009
|
Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
|
EN 4331:2002
|
Aerospace series - Steel FE-WL1804 (25CrMnMo4-2-2) - Filler metal for welding - Wire and rod
|
EN 10222-4:2017
|
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
|
EN 10222-2:2017
|
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
|
EN ISO 17632:2015
|
Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
|
EN 10083-1:2006
|
Steels for quenching and tempering - Part 1: General technical delivery conditions
|
EN 10027-1:2016
|
Designation systems for steels - Part 1: Steel names
|
EN 10084:2008
|
Case hardening steels - Technical delivery conditions
|
EN ISO 636:2017
|
Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017)
|
EN 3526:2007
|
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1 180 MPa
|
AWS A5.28 : 1996
|
SPECIFICATION FOR LOW ALLOY STEEL FILLER METALS FOR GAS SHIELDED ARC WELDING
|
EN 3971:2006
|
Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D ≤ 350 mm
|
EN 10222-1:2017
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
|
EN ISO 14175:2008
|
Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
|